[Docs] [txt|pdf] [Tracker] [Email] [Nits]

Versions: 00 RFC 2224

Internet-Draft
draft-callaghan-url-nfs-00.txt
October 1, 1996
Expires April 1, 1997

                             NFS URL Scheme

Status of this Memo

   This document is an Internet-Draft.  Internet-Drafts are working
   documents of the Internet Engineering Task Force (IETF), its
   areas, and its working groups.  Note that other groups may also
   distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other
   documents at any time.  It is inappropriate to use Internet-
   Drafts as reference material or to cite them other than as
   ``work in progress.''

   To learn the current status of any Internet-Draft, please check
   the ``1id-abstracts.txt'' listing contained in the Internet-
   Drafts Shadow Directories on ftp.is.co.za (Africa),
   nic.nordu.net (Europe), munnari.oz.au (Pacific Rim),
   ds.internic.net (US East Coast), or ftp.isi.edu (US West Coast).

Abstract

   A new URL scheme, "nfs:" is defined.  It is used to refer
   to files and directories on NFS servers. The scheme uses
   the public filehandle and multi-component lookup to access
   server data with a minimum of protocol overhead.

   The NFS protocol provides access to shared filesystems
   across networks.  It is designed to be machine, operating
   system, network architecture, and transport protocol independent.
   The protocol currently exists in two versions: version 2 [RFC1094]
   and version 3 [RFC1813], both built on ONC RPC [RFC1831] at its
   associated eXternal Data Representation (XDR) [RFC1832] and
   Binding Protocol [RFC1833].

Table of Contents

   1.    URL Syntax . . . . . . . . . . . . . . . . . . . . . . . . 2
   2.    URL Evaluation . . . . . . . . . . . . . . . . . . . . . . 2
   3.    Server Connection  . . . . . . . . . . . . . . . . . . . . 2
   4.    NFS Version  . . . . . . . . . . . . . . . . . . . . . . . 3
   5.    Public Filehandle  . . . . . . . . . . . . . . . . . . . . 3



Callaghan                                                       [Page 1]

Internet-Draft               NFS URL Scheme                 October 1996


   5.1     NFS Version 2 Public Filehandle  . . . . . . . . . . . . 3
   5.2     NFS Version 3 Public Filehandle  . . . . . . . . . . . . 3
   6.    Multi-component Lookup . . . . . . . . . . . . . . . . . . 4
   6.1     Absolute vs Relative Pathname  . . . . . . . . . . . . . 5
   6.2     Symbolic Links . . . . . . . . . . . . . . . . . . . . . 5
   7.    Mount Protocol . . . . . . . . . . . . . . . . . . . . . . 6
   8.    Bibliography . . . . . . . . . . . . . . . . . . . . . . . 8
   9.    Security Considerations  . . . . . . . . . . . . . . . . . 9
   10.   Acknowledgements . . . . . . . . . . . . . . . . . . . . . 9
   11.   Author's Address . . . . . . . . . . . . . . . . . . . . . 9


1. URL Syntax

   An NFS URL is based on the Common Internet Scheme Syntax described
   in section 3.1 of RFC 1738.  It has the general form:

        nfs://<host>:<port>/<url-path>

   The ":<port>" part is optional.  If omitted then port 2049 is
   assumed.  The <url-path> is also optional.  If it is omitted, then
   the "/" between <host>:<port> and <url-path> may also be omitted.

   The <url-path> is a hierarchical directory path of the form
   <directory>/<directory>/<directory>/.../<name>. The <url-path>
   must consist only of characters within the US-ASCII character
   set.  Within a <directory> or <name> component the character "/"
   is reserved and must be encoded as described in Section 2.2 of RFC
   1738.  If <url-path> is omitted, it must default to the path ".".

2. URL Evaluation

   A client must evaluate an NFS URL by a method known as WebNFS.
   This method provides easy passage through firewalls and proxy
   servers, as well as using a minimum number of messages.  The
   WebNFS method is defined for NFS versions 2 and 3. It assumes that
   the server registers on TCP or UDP port 2049 and supports the
   public filehandle and multi-component lookup semantics as
   described in the following sections.

3. Server Connection

   The client must first attempt to create a TCP connection to <host>
   using the <port> specified.  If :<port> is omitted, then port 2049
   will be used.  If the server refuses the TCP connection, then the
   client will use UDP.





Callaghan                                                       [Page 2]

Internet-Draft               NFS URL Scheme                 October 1996


4. NFS Version

   The client must first attempt to use NFS version 3.  If the server
   returns an RPC PROG_MISMATCH error then the client must assume
   that NFS version 3 is not supported, and retry the operation with
   an NFS version 2 public filehandle.

5. Public Filehandle

   NFS filehandles are normally created by the server and used to
   identify uniquely a particular file or directory on the server.
   The client does not normally create filehandles or have any
   knowledge of the contents of a filehandle.

   The public filehandle is an an exception.  It is an NFS filehandle
   with a reserved value and special semantics that allow an initial
   filehandle to be obtained.  A WebNFS client uses the public
   filehandle as an initial filehandle rather than using the MOUNT
   protocol.  Since NFS version 2 and version 3 have different
   filehandle formats, the public filehandle is defined differently
   for each.

   The public filehandle is a zero filehandle.  For NFS version 2
   this is a filehandle with 32 zero octets.  A version 3 public
   filehandle has zero length.

5.1 NFS Version 2 Public Filehandle

   A version 2 filehandle is defined in RFC 1094 as an opaque value
   occupying 32 octets.  A version 2 public filehandle has a zero
   in each octet, i.e. all zeros.

    1                                                             32
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


5.2 NFS Version 3 Public Filehandle

   A version 3 filehandle is defined in RFC 1813 as a variable length
   opaque value occupying up to 64 octets.  The length of the filehandle
   is indicated by an integer value contained in a 4 octet value
   which describes the number of valid octets that follow. A version
   3 public filehandle has a length of zero.






Callaghan                                                       [Page 3]

Internet-Draft               NFS URL Scheme                 October 1996


   +-+-+-+-+
   |   0   |
   +-+-+-+-+

6. Multi-component Lookup

   Normally the NFS LOOKUP request (version 2 or 3) takes a directory
   filehandle along with the name of a directory member, and returns
   the filehandle of the directory member.  If a client needs to
   evaluate a pathname that contains a sequence of components, then
   beginning with the directory filehandle of the first component it
   must issue a series of LOOKUP requests one component at a time.
   For instance, evaluation of the path  "a/b/c" will generate
   separate LOOKUP requests for each component of the pathname "a",
   "b", and "c".

   A LOOKUP request that uses the public filehandle can provide a
   pathname containing multiple components.  The server is expected
   to evaluate the entire pathname and return a filehandle for the
   final component.

   For example, rather than evaluate the path "a/b/c" as:

        LOOKUP  FH=0x0  "a"  --->
                             <---  FH=0x1
        LOOKUP  FH=0x1  "b"  --->
                             <---  FH=0x2
        LOOKUP  FH=0x2  "c"  --->
                             <---  FH=0x3

   Relative to the public filehandle these three LOOKUP
   requests can be replaced by a single multi-component
   lookup:

        LOOKUP  FH=0x0  "a/b/c"  --->
                                 <---  FH=0x3

   Multi-component lookup is supported only for LOOKUP requests
   relative to the public filehandle.

   The <url-path> of the NFS URL must be evaluated as a
   multi-component lookup. This implies that the path components are
   delimited by slashes and the characters that make up the path must
   be in the printable US-ASCII character set.

   If the <url-path> is empty, the client must send a multi-component
   lookup for the pathname ".".




Callaghan                                                       [Page 4]

Internet-Draft               NFS URL Scheme                 October 1996


6.1 Absolute vs. Relative Pathname

   A pathname that begins with a slash character is considered
   "absolute" and will be evaluated relative to the server's root.
   A pathname that does not begin with a slash is "relative" and will
   be evaluated relative to the directory with which the public
   filehandle is associated.

   Note that the "/" in an NFS URL that delimits the <host>:<port>
   from the <url-path> is not considered part of the pathname.  For
   example, if the public filehandle is associated with the server's
   directory "/a/b/c" then the URL:

        nfs://server/d/e/f

   will be evaluated with a relative multi-component lookup of the
   path "d/e/f" relative to the server's directory "/a/b/c" while
   the URL:

        nfs://server//a/b/c/d/e/f

   will locate the same file with an absolute multi-component lookup
   of the path "/a/b/c/d/e/f" relative to the server's filesystem
   root.  Notice that a double slash is required at the beginning of
   the path; the first slash is the URL delimiter between the
   <host>:<port> and the <url-path> and the second slash is the first
   character of <url-path>.

   Not all WebNFS servers can support arbitrary use of absolute
   paths.  Clearly, the server must not return a filehandle if the
   path identifies a file or directory that is not exported by the
   server.  In addition, some servers will not return a filehandle if
   the path names a file or directory in an exported filesystem
   different from the one that is associated with the public
   filehandle.

6.2 Symbolic Links

   The NFS protocol supports symbolic links, which are the
   filesystem equivalent of a relative URL. If a WebNFS
   client retrieves a filehandle for a symbolic link (as
   indicated by the file type attribute) then it should
   send a READLINK request to the server to retrieve the
   path comprising the symbolic link.

   This path should then be combined with the URL which referenced
   the symbolic link according to the rules described in RFC 1808.
   If the relative URL in the symbolic link text is to be resolved



Callaghan                                                       [Page 5]

Internet-Draft               NFS URL Scheme                 October 1996


   successfully then it must contain only ASCII characters and
   conform to the syntax described in RFC 1808.  Note that this
   allows a symbolic link to contain an entire URL and it may specify
   a scheme that is not necessarily an NFS URL.

   An exception to RFC 1808 rules applies in the case of an absolute
   symbolic link, where the path begins with a "/".  RFC 1808
   describes a method for resolving relative URLs with respect
   to the base URL.  Given a base URL of "nfs://s/a/b/c" that
   references a symbolic link with contents "/a/b/c/d", the method
   would yield a URL "nfs://s/a/b/c/d" which would be correct only
   if the public filehandle were co-located with the server's
   filesystem root.

   If the symbolic link begins with a slash, then after resolving
   a relative URL derived from the symbolic link contents according
   to the method in RFC 1808, the client must insert an additional
   slash in front of the path so that the server will evaluate the
   path relative to the server's root, rather than the public
   filehandle directory. This variation from the normal method
   of resolving a relative URL applies only to handling of symbolic
   links.  The additional slash must not be inserted if the relative
   URL was embedded in a document or other encapsulating entity.

   For example, if the symbolic link is named by the URL

        nfs://server/a/b

   then the the following examples show how a new URL can be
   formed from the symbolic link text:

         c                      = nfs://server/a/c

         c/d                    = nfs://server/a/c/d

         ../c                   = nfs://server/c

         /c/d                   = nfs://server//c/d

         nfs://server2/a/b      = nfs://server2/a/b

7. Mount Protocol

   The NFS URL may have limited use for naming files on
   servers that do not support the public filehandle and
   multi-component lookup.

   If the server returns an NFS3ERR_STALE, NFS3ERR_INVAL, or



Callaghan                                                       [Page 6]

Internet-Draft               NFS URL Scheme                 October 1996


   NFS3ERR_BADHANDLE error in response to the client's use of
   a public filehandle, then the client should attempt to resolve
   the <url-path> to a filehandle using the MOUNT protocol.

   Version 1 of the MOUNT protocol is described in Appendix A of
   RFC 1094 and version 3 in Appendix I of RFC 1813. Version 2
   of the MOUNT protocol is identical to version 1 except for
   the addition of a procedure MOUNTPROC_PATHCONF which returns
   POSIX pathconf information from the server.

   Note that the pathname sent to the server in the MOUNTPROC_MNT
   request is assumed to be a server native path, rather than
   a slash-separated path described by RFC 1738.  Hence, the
   MOUNT protocol can reasonably be expected to map a <url-path>
   to a filehandle only on servers that support slash-separated
   ASCII native paths.  In general, servers that do not support
   WebNFS access or slash-separated ASCII native paths should not
   advertise NFS URLs.

   At this point the client must already have some indication
   as to which version of the NFS protocol is supported on the
   server.  Since the filehandle format differs between NFS
   versions 2 and 3, the client must select the appropriate
   version of the MOUNT protocol.  MOUNT versions 1 and 2 return
   only NFS version 2 filehandles, whereas MOUNT version 3 returns
   NFS version 3 filehandles.

   Unlike the NFS service, the MOUNT service is not registered on a
   well-known port.  The client must use the PORTMAP service to
   locate the server's MOUNT port before it can transmit a
   MOUNTPROC_MNT request to retrieve the filehandle corresponding to
   the requested path.

       Client                                       Server
       ------                                       ------

       -------------- MOUNT port ? -------------->  Portmapper
       <-------------- Port=984 ------------------

       ------- Filehandle for /export/foo ?  ---->  Mountd @ port 984
       <--------- Filehandle=0xf82455ce0..  ------

   NFS servers commonly use a client's successful MOUNTPROC_MNT
   request request as an indication that the client has "mounted"
   the filesystem and may maintain this information in a file
   that lists the filesystems that clients currently have mounted.
   This information is removed from the file when the client
   transmits an MOUNTPROC_UMNT request.  Upon receiving a



Callaghan                                                       [Page 7]

Internet-Draft               NFS URL Scheme                 October 1996


   successful reply to a MOUNTPROC_MNT request, a WebNFS client
   should send a MOUNTPROC_UMNT request to prevent an accumulation
   of "mounted" records on the server.

8.0 Bibliography

[RFC1738]       T. Berners-Lee, L. Masinter, M. McCahill,
                "Uniform Resource Locators (URL)," RFC-1738,
                December 1994.
                http://www.internic.net/rfc/rfc1738.txt

[RFC1808]       R. Fielding,
                "Relative Uniform Resource Locators," RFC-1808,
                June 1995
                http://www.internic.net/rfc/rfc1808.txt

[RFC1831]       R. Srinivasan, "RPC: Remote Procedure Call
                Protocol Specification Version 2," RFC-1831,
                August 1995.
                http://www.internic.net/rfc/rfc1831.txt

[RFC1832]       R. Srinivasan, "XDR: External Data Representation
                Standard," RFC-1832, August 1995.
                http://www.internic.net/rfc/rfc1832.txt

[RFC1833]       R. Srinivasan, "Binding Protocols for ONC RPC
                Version 2," RFC-1833, August 1995.
                http://www.internic.net/rfc/rfc1833.txt

[RFC1094]       Sun Microsystems, Inc., "Network Filesystem
                Specification," RFC-1094, DDN Network
                Information Center, SRI International, Menlo
                Park, CA.  NFS version 2 protocol specification.
                http://www.internic.net/rfc/rfc1094.txt

[RFC1813]       Sun Microsystems, Inc., "NFS Version 3 Protocol
                Specification," RFC-1813, DDN Network
                Information Center, SRI International, Menlo
                Park, CA.  NFS version 3 protocol specification.
                http://www.internic.net/rfc/rfc1813.txt

[Sandberg]      Sandberg, R., D. Goldberg, S. Kleiman, D. Walsh,
                B.  Lyon, "Design and Implementation of the Sun
                Network Filesystem," USENIX Conference
                Proceedings, USENIX Association, Berkeley, CA,
                Summer 1985.  The basic paper describing the
                SunOS implementation of the NFS version 2
                protocol, and discusses the goals, protocol



Callaghan                                                       [Page 8]

Internet-Draft               NFS URL Scheme                 October 1996


                specification and trade-offs.

[X/OpenNFS]     X/Open Company, Ltd., X/Open CAE Specification:
                Protocols for X/Open Internetworking: XNFS,
                X/Open Company, Ltd., Apex Plaza, Forbury Road,
                Reading Berkshire, RG1 1AX, United Kingdom,
                1991.  This is an indispensable reference for
                NFS version 2 protocol and accompanying
                protocols, including the Lock Manager and the
                Portmapper.

[X/OpenPCNFS]   X/Open Company, Ltd., X/Open CAE Specification:
                Protocols for X/Open Internetworking: (PC)NFS,
                Developer's Specification, X/Open Company, Ltd.,
                Apex Plaza, Forbury Road, Reading Berkshire, RG1
                1AX, United Kingdom, 1991.  This is an
                indispensable reference for NFS version 2
                protocol and accompanying protocols, including
                the Lock Manager and the Portmapper.

9. Security Considerations

   Since the WebNFS server features are based on NFS protocol
   versions 2 and 3, the RPC based security considerations
   described in RFC 1094, RFC 1831, and RFC 1832 apply here also.

   Clients and servers may separately negotiate secure
   connection schemes for authentication, data integrity,
   and privacy.



10. Acknowledgements

   This specification was extensively reviewed by the NFS
   group at SunSoft and brainstormed by Michael Eisler.

11. Author's Address

   Address comments related to this document to:

      nfs@eng.sun.com


   Brent Callaghan
   Sun Microsystems, Inc.
   2550 Garcia Avenue
   Mailstop Mpk17-201



Callaghan                                                       [Page 9]

Internet-Draft               NFS URL Scheme                 October 1996


   Mountain View, CA 94043-1100

   Phone: 1-415-786-5067
   Email: brent.callaghan@eng.sun.com
   Fax:   1-415-786-5896














































Callaghan                                                      [Page 10]


Html markup produced by rfcmarkup 1.109, available from https://tools.ietf.org/tools/rfcmarkup/