[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 RFC 5342

Network Working Group                                Donald Eastlake 3rd
Internet-Draft                                      Eastlake Enterprises
Updates: RFC 2153
Intended Status: Best Current Practice
Expires: December 2008                                     June 29, 2008


              IANA Considerations and IETF Protocol Usage
                        for IEEE 802 Parameters
          <draft-eastlake-ethernet-iana-considerations-08.txt>


Status of This Document

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   This document is intended to become a Best Current Practice.
   Distribution of this document is unlimited. Comments should be sent
   to the IETF <ietf@ietf.org> or to the following list. Please include
   the draft file name in your subject line.
       IESG <iesg@ietf.org>, Donald Eastlake 3rd <d3e3e3@gmail.com>,
       Dan Romascanu <dromasca@avaya.com>,
       Mark Townsley <townsley@cisco.com>
       Erik Nordmark <erik.nordmark@sun.com>,
       Bernard Aboba <Bernard_Aboba@hotmail.com>.

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC 2026.  Internet-Drafts are
   working documents of the Internet Engineering Task Force (IETF), its
   areas, and its working groups.  Note that other groups may also
   distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


Abstract

   Some IETF protocols make use of Ethernet frame formats and IEEE 802
   parameters.  This document discusses some use of such parameters in
   IETF protocols and specifies IANA considerations for allocation of
   code points under the IANA OUI (Organizationally Unique Identifier).


D. Eastlake                                                     [Page 1]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


Table of Contents

      Status of This Document....................................1
      Abstract...................................................1

      1. Introduction............................................3
      1.1 Notations Used in This Document........................3
      1.2 The IEEE Registration Authority........................3
      1.2.1 The IANA OUI.........................................4
      1.3 Acknowledgements.......................................4

      2. Ethernet Identifier Parameters..........................5
      2.1 48-bit MAC Identifiers and OUIs........................5
      2.1.1 EUI-48 Allocations under the IANA OUI................5
      2.1.2 EUI-48 IANA Allocation Considerations................6
      2.2 64-bit MAC Identifiers.................................7
      2.2.1 IPv6 Use of Modified EUI-64 Identifiers..............7
      2.2.2 EUI-64 IANA Allocation Considerations................8
      2.3 Other IETF Used MAC-48 Identifiers....................10
      2.3.1 Identifiers Prefixed 33-33..........................10
      2.3.2 The 'CF Series'.....................................10
      2.3.2.1 Changes to RFC 2153...............................11

      3. Ethernet Protocol Parameters...........................12
      3.1 Ethernet Protocol Allocation Under the IANA OUI.......13

      4. Other OUI Based Parameters.............................15

      5. IANA Considerations....................................16
      5.1 Expert Review and IESG Ratification...................16
      5.2 Informational IANA Web Page Material..................17
      5.3 OUI Exhaustion........................................17
      6. Security Considerations................................18

      7. Normative References...................................19
      8. Informative References.................................19

      Template Annex............................................21
      EUI-48/EUI-64 Identifier or Identifier Block Template.....21
      5-octet Ethernet Protocol Identifier Template.............22
      Other IANA OUI Based Parameter Template...................22

      Ethertypes Annex..........................................23
      Some Ethertypes Specified By The IETF.....................23
      Some IEEE 802 Ethertypes..................................23

      Disclaimer................................................24
      Additional IPR Provisions.................................24
      Author's Address..........................................25



D. Eastlake                                                     [Page 2]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


1. Introduction

   Some IETF protocols use Ethernet or other [IEEE] 802 related
   communications frame formats and parameters [IEEE802]. These include
   MAC identifiers and protocol identifiers.

   This document specifies IANA considerations for the allocation of
   code points under the IANA OUI. It also discusses some other IETF use
   of IEEE 802 code points.

   [RFC5226] is incorporated herein except where there are contrary
   provisions in this document.



1.1 Notations Used in This Document

   This document uses Hexadecimal Notation. Each octet (that is, 8-bit
   byte) is represented by two hexadecimal digits giving the value of
   the octet as an unsigned integer. Successive octets are separated by
   a hyphen. This document consistently uses IETF bit ordering although
   the physical order of bit transmission within an octet on an IEEE
   [802.3] link is from the lowest order bit to the highest order bit,
   the reverse.

   In this document:

      "IAB" stands for Individual Address Block, not for Internet
           Architecture Board;
      "MAC" stands for Media Access Control, not for Message
           Authentication Code; and
      "OUI" stands for Organizationally Unique Identifier.
      "**" indicates exponentiation. For example, 2**24 is two to the
           twenty-fourth power.



1.2 The IEEE Registration Authority

   Originally the responsibility of Xerox Corporation, the registration
   authority for Ethernet parameters is now the IEEE Registration
   Authority, available on the web at:

         http://standards.ieee.org/regauth/

   Anyone may apply to that Authority for parameters.  They may impose
   fees or other requirements but commonly waive fees for applications
   from standards development organizations.

   A list of some allocated OUIs and IABs and their holders is


D. Eastlake                                                     [Page 3]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   downloadable from the IEEE Registration Authority site.



1.2.1 The IANA OUI

   The OUI 00-00-5E has been allocated to IANA.



1.3 Acknowledgements

   The contributions and support of the following people, listed in
   alphabetic order, is gratefully acknowledged:

      Bernard Aboba, Scott O. Bradner, Ian Calder, Michelle Cotton, Lars
      Eggert, Eric Gray, Alfred Hoenes, Russ Housley, Charlie Kaufman,
      Erik Nordmark, Dan Romascanu, Mark Townsley, and Geoff Thompson.


































D. Eastlake                                                     [Page 4]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


2. Ethernet Identifier Parameters

   Section 2.1 discusses EUI-48 MAC identifiers, their relationship to
   OUIs and IABs, and allocations under the IANA OUI.  Section 2.2
   extends this to EUI-64 identifiers. Section 2.3 discusses other IETF
   MAC identifier use not under the IANA OUI.



2.1 48-bit MAC Identifiers and OUIs

   48-bit MAC "addresses" are the most commonly used Ethernet interface
   identifiers. Those that are globally unique are also called EUI-48
   (Extended Unique Identifier 48) identifiers. An EUI-48 is structured
   into an initial 3 octet OUI (Organizationally Unique Identifier) and
   an additional 3 octets assigned by the OUI holder.  For organizations
   not requiring 3 octets worth of identifiers, the IEEE allocates IABs
   (Individual Address Blocks) instead, where the first 4 1/2 octets (36
   bits) are assigned giving the holder of the IAB 1 1/2 octets (12
   bits) they can control.

   The IEEE describes its assignment procedures and policies for IEEE
   802 related identifiers in [802 O&A].

   Two bits within the initial 3 octets of an EUI-48 have special
   significance: the Group bit (01-00-00) and the Local bit (02-00-00).
   OUIs and IABs are allocated with the Local bit zero and the Group bit
   unspecified.  Multicast identifiers may be constructed by turning on
   the Group bit and unicast identifiers constructed by leaving the
   Group bit zero.

   For globally unique EUI-48 identifiers allocated by an OUI or IAB
   owner, the Local bit is zero. If the Local bit is a one, the
   identifier is considered by IEEE 802 to be a local identifier under
   the control of the local network administrator. If the Local bit is
   on, the holder of an OUI (or IAB) has no special authority over
   48-bit MAC identifiers whose first three (or 4 1/2) octets correspond
   to their OUI (or IAB).



2.1.1 EUI-48 Allocations under the IANA OUI

   The OUI 00-00-5E has been assigned to IANA as stated in Section 1.2.1
   above. This includes 2**24 EUI-48 multicast identifiers from
   01-00-5E-00-00-00 to 01-00-5E-FF-FF-FF and 2**24 EUI-48 unicast
   identifiers from 00-00-5E-00-00-00 to 00-00-5E-FF-FF-FF.

   Of these EUI-48 identifiers, the following allocations have been made
   thus far:


D. Eastlake                                                     [Page 5]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


      o  The 2**23 multicast identifiers from 01-00-5E-00-00-00 through
         01-00-5E-7F-FF-FF have been allocated for IPv4 multicast
         [RFC1112].

      o  The 2**20 multicast identifiers from 01-00-5E-80-00-00 through
         01-00-5E-8F-FF-FF have been allocated for MPLS multicast
         [RFCxxxx].

      o  The 2**8 unicast identifiers from 00-00-5E-00-00-00 through
         00-00-5E-00-00-FF are reserved and require IESG Ratification
         for allocation (see Section 5.1).

      o  The 2**8 unicast identifiers from 00-00-5E-00-01-00 through
         00-00-5E-00-01-FF have been allocated for the Virtual Router
         Redundancy Protocol (VRRP) [RFC3768].



2.1.2 EUI-48 IANA Allocation Considerations

   EUI-48 allocations under the current or a future IANA OUI (see
   Section 5.2) must meet the following requirements:

      o  must be for standards purposes (either for an IETF Standard or
         other standard related to IETF work),

      o  must be for a block of a power of two identifiers starting at a
         boundary which is an equal or greater power of two, including
         the allocation of one (2**0) identifier,

      o  are not to be used to evade the requirement for vendors to
         obtain their own block of identifiers from the IEEE, and

      o  must be documented in an Internet Draft or RFC.

   In addition, approval must be obtained as follows, following the
   procedure in Section 5.1:

      Small to medium allocations of a block of 1, 2, 4, ..., 32768,
         65536, (2**0, 2**1, 2**2, ..., 2**15, 2**16) EUI-48 identifiers
         require Expert Review.

      Large allocations of 131072 (2**17) or more EUI-48 identifiers
         require IESG Ratification (see Section 5.1).

   To simplify record keeping, all future allocations of 256 (2**8) or
   fewer identifiers shall have the Group bit unspecified, that is,
   shall be allocations of parallel equal size blocks of multicast and
   unicast identifiers, even if one of these two types is not needed for
   the proposed use.  The only exception is that requests for unicast


D. Eastlake                                                     [Page 6]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   only identifier blocks of any size may be allocated out of the
   remaining identifiers in the large unicast range from
   00-00-5E-00-02-00 to 00-00-5E-8F-FF-FF.



2.2 64-bit MAC Identifiers

   IEEE also defines a system of 64-bit MAC identifiers including
   EUI-64s. Uptake of these "MAC-64" identifiers has been limited. They
   are currently used in constructing some IPv6 Interface Identifiers as
   described below and by the following IEEE standards:

   o  IEEE 1394 (also known as FireWire and i.Link),

   o  IEEE 802.15.4 (also known as ZigBee).

   Adding a 5-octet (40-bit) extension to a 3-octet (24-bit) OUI forms
   an EUI-64 identifiers under that OUI.  As with EUI-48 identifiers,
   the OUI has the same group/unicast and local/global bits.

   The discussion below is almost entirely in terms of the "Modified"
   form of EUI-64 identifiers; however, anyone allocated such an
   identifier also has the unmodified form and may use it as a MAC
   identifier on any link that uses such 64-bit identifiers for
   interfaces.



2.2.1 IPv6 Use of Modified EUI-64 Identifiers

   MAC-64 identifiers are used to form the lower 64 bits of some IPv6
   addresses (Section 2.5.1 and Appendix A of [RFC4291] and Appendix A
   of [RFC5214]). When so used the MAC-64 is modified by inverting the
   local/global bit to form an IETF "Modified EUI-64 identifier". Below
   is an illustration of a Modified EUI-64 identifier under the IANA
   OUI, where aa-bb-cc-dd-ee is the extension.

         02-00-5E-aa-bb-cc-dd-ee

   The first octet is shown as 02 rather than 00 because, in Modified
   EUI-64 identifiers, the sense of the local/global bit is inverted
   compared with EUI-48 identifiers.  It is the globally unique values
   (universal scope) that have the 02 bit on in the first octet while
   those with this bit off are locally assigned and out of scope for
   global allocation.

   The local/global bit was inverted to make it easier for network
   operators to type in local-scope identifiers. Thus such Modified
   EUI-64 identifiers as 1, 2, etc.  (ignoring leading zeros), are


D. Eastlake                                                     [Page 7]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   local. Without the modification, they would have to be
   02-00-00-00-00-00-00-01, 02-00-00-00-00-00-00-02, etc., to be local.

   As with MAC-48 identifiers, the 01 bit on in the first octet
   indicates a group identifier.

   When the first two octets of the extension of a Modified EUI-64
   identifier are FF-FE, the remainder of the extension is a 24-bit
   value as assigned by the OUI owner for an EUI-48. For example:

         02-00-5E-FF-FE-yy-yy-yy
   or
         03-00-5E-FF-FE-yy-yy-yy

   where yy-yy-yy is the OUI owner (IANA in this case) assigned portion
   of an EUI-48 global unicast or multicast identifier.  Thus any holder
   of one or more EUI-48 identifiers under the IANA OUI also has an
   equal number of Modified EUI-64 identifiers that can be formed by
   inserting FF-FE in the middle of their EUI-48 identifiers and
   inverting the local/global bit.

      (Note: [EUI-64] defines FF-FF as the bits to be inserted to create
      an IEEE EUI-64 identifier from a MAC-48 identifier. That document
      says the FF-FE value is used when starting with an EUI-48
      identifier. The IETF uses only FF-FE to create Modified EUI-64
      identifiers from 48-bit Ethernet station identifiers regardless of
      whether they are EUI-48 or MAC-48 local identifiers.  EUI-48 and
      local MAC-48 identifiers are syntactically equivalent, and this
      doesn't cause any problems in practice.)

   In addition, certain Modified EUI-64 identifiers under the IANA OUI
   are reserved for holders of IPv4 addresses as follows:

         02-00-5E-FE-xx-xx-xx-xx

   where xx-xx-xx-xx is a 32-bit IPv4 address. For Modified EUI-64
   identifiers based on IPv4 address, the local/global bit should be set
   to correspond to whether the IPv4 address is local or global. (Keep
   in mind that the sense of the Modified EUI-64 identifier local/global
   bit is reversed from that in (unmodified) MAC-64 identifiers.)



2.2.2 EUI-64 IANA Allocation Considerations

   The following table shows which Modified EUI-64 identifiers under the
   IANA OUI are reserved, used, or available as indicated.

      02-00-5E-00-00-00-00-00 to 02-00-5E-0F-FF-FF-FF-FF reserved



D. Eastlake                                                     [Page 8]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


      02-00-5E-10-00-00-00-00 to 02-00-5E-EF-FF-FF-FF-FF available for
         allocation

      02-00-5E-F0-00-00-00-00 to 02-00-5E-FD-FF-FF-FF-FF reserved

      02-00-5E-FE-00-00-00-00 to 02-00-5E-FE-FF-FF-FF-FF used by IPv4
         address holders as described above

      02-00-5E-FF-00-00-00-00 to 02-00-5E-FF-FD-FF-FF-FF reserved

      02-00-5E-FF-FE-00-00-00 to 02-00-5E-FF-FE-FF-FF-FF used by holders
         of EUI-48 identifiers under the IANA OUI as described above

      02-00-5E-FF-FF-00-00-00 to 02-00-5E-FF-FF-FF-FF-FF reserved

   Reserved identifiers above require IESG Ratification (see Section
   5.1) for allocation. IANA EUI-64 identifier allocations under the
   IANA OUI must meet the following requirements:

      o  must be for standards purposes (either for an IETF Standard or
         other standard related to IETF work),

      o  must be for a block of a power of two identifiers starting at a
         boundary which is an equal or greater power of two, including
         the allocation of one (2**0) identifier,

      o  are not to be used to evade the requirement for vendors to
         obtain their own block of identifiers from the IEEE, and

      o  must be documented in an Internet Draft or RFC.

   In addition, approval must be obtained as follows, following the
   procedure in Section 5.1:

      Small to medium allocations of a block of 1, 2, 4, ..., 134217728,
         268435456, (2**0, 2**1, 2**2, ..., 2**27, 2**28) EUI-64
         identifiers require Expert Review.

      Allocations of any size, including 536870912 (2**29) or more
         EUI-64 identifiers, may be made with IESG Ratification (see
         Section 5.1).

   To simplify record keeping, all allocations of 65536 (2**16) or less
   EUI-64 identifiers shall have the Group bit unspecified, that is,
   shall be allocations of parallel equal size blocks of multicast and
   unicast identifiers, even if one of these two types is not needed for
   the proposed use.





D. Eastlake                                                     [Page 9]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


2.3 Other IETF Used MAC-48 Identifiers

   There are two other blocks of MAC-48 identifiers that are used by the
   IETF as described below.



2.3.1 Identifiers Prefixed 33-33

   All MAC-48 multicast identifiers prefixed "33-33", that is the 2**32
   multicast MAC identifiers in the range from 33-33-00-00-00-00 to
   33-33-FF-FF-FF-FF, are used by the IETF for global IPv6 multicast
   [RFC2464].  In all these identifiers, the Group bit (the bottom bit
   of the first octet) is on as is required to work properly with
   existing hardware as a multicast identifier.  They also have the
   Local bit on and are used for this purpose in IPv6 networks.

      (Historical note: It was the custom during IPv6 design to use "3"
      for unknown or example values and 3333 Coyote Hill Road, Palo
      Alto, California, is the address of PARC (Palo Alto Research
      Center, formerly "Xerox PARC").  Ethernet was originally specified
      by Digital Equipment Corporation, Intel Corporation, and Xerox
      Corporation. The pre IEEE [802.3] Ethernet protocol has sometimes
      been known as "DIX" Ethernet from the first letters of the names
      of these companies.)



2.3.2 The 'CF Series'

   The Informational [RFC2153] declared the 3-octet values from CF-00-00
   through CF-FF-FF to be OUIs available for allocation by IANA to
   software vendors for use in PPP [RFC1661] or for other uses where
   vendors do not otherwise need an IEEE-assigned OUI. It should be
   noted that, when used as MAC-48 prefixes, these values have the Local
   and Group bits on, while all IEEE-allocated OUIs have those bits off.
   The Group bit is meaningless in PPP. To quote [RFC2153]: "The
   'CF0000' series was arbitrarily chosen to match the PPP NLPID 'CF',
   as a matter of mnemonic convenience."

   CF-00-00 is reserved and IANA lists multicast identifier
   CF-00-00-00-00-00 as used for Ethernet loopback tests.

   In over a decade of availability, only a handful of values in the 'CF
   Series' has been allocated. (See http://www.iana.org under both
   Ethernet Parameters and PPP Parameters.)






D. Eastlake                                                    [Page 10]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


2.3.2.1 Changes to RFC 2153

   The IANA Considerations in [RFC2153] are updated as follows (no
   technical changes are made): Use of these identifiers based on IANA
   allocation is deprecated. IANA is directed not to allocate any
   further values in the 'CF Series'.














































D. Eastlake                                                    [Page 11]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


3. Ethernet Protocol Parameters

   Ethernet Protocol parameters provide a means of indicating the
   contents of a frame, for example that its contents is IPv4 or IPv6.

   The concept has been extended to labeling by "tags". A tag in this
   sense is a prefix whose type is identified by an Ethertype and which
   is then followed by either another tag or by an Ethertype or LSAP
   protocol indicator for the "main" body of the frame, as described
   below. Traditionally in the [802 O&A] world, tags are fixed length
   and do not include any encoding of their own length. Thus anything
   which is processing a frame can not, in general, safely process
   anything in the frame past an Ethertype it does not understand. An
   example is the C-tag (formerly the Q-tag) [802.1Q]. It provides
   customer VLAN and priority information for a frame.

   There are two types of protocol identifier parameters that can occur
   in Ethernet frames after the initial MAC-48 destination and source
   identifiers:

      Ethertypes: These are 16-bit identifiers appearing as the initial
         two octets after the MAC destination and source (or after a
         tag) which, when considered as an unsigned integer, are equal
         to or larger than 0x0600.

      LSAPs: These are 8-bit protocol identifiers that occur in pairs
         immediately after an initial 16-bit (two octet) remaining frame
         length which is in turn after the MAC destination and source
         (or after a tag).  Such a length must, when considered as an
         unsigned integer, be less than 0x5DC or it could be mistaken as
         an Ethertype. LSAPs (Link-Layer Subnet Access Points) occur in
         pairs where one is intended to indicate the source protocol
         handler and one the destination protocol handler; however, use
         cases where the two are different have been relatively rare.

   Neither Ethertypes nor LSAPs are allocated by IANA but by the IEEE
   Registration authority (see Section 1.2 above and the Ethertype Annex
   below). However, both LSAPs and Ethertypes have extension mechanisms
   so that they can be used with five octet Ethernet protocol
   identifiers under an OUI including those allocated by IANA under the
   IANA OUI.

   When using the IEEE 802 LLC format (SNAP) [802 O&A] for a frame, an
   OUI based protocol identifier can be expressed as follows:

         xx-xx-AA-AA-03-yy-yy-yy-zz-zz

   where xx-xx is the frame length and, as above, must be small enough
   not to be confused with an Ethertype, "AA" is the LSAP that indicates
   this use and is sometimes referred to as the SNAP SAP, "03" is the


D. Eastlake                                                    [Page 12]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   LLC control octet indicating datagram service, yy-yy-yy is an OUI,
   and zz-zz is a protocol number, under that OUI, allocated by the OUI
   owner.  The odd five-octet length for such OUI based protocol
   identifiers was chosen so that, with the LLC control octet ("03"),
   the result is 16 bit aligned.

   When using an Ethertype to indicate the main type for a frame body,
   the special "OUI Extended Ethertype" 88-B7 is available. Using this
   Ethertype, a frame body can begin with

         88-B7-yy-yy-yy-zz-zz

   where yy-yy-yy and zz-zz have the same meaning as in the SNAP format
   described above.

   It is also possible, within the SNAP format, to use an arbitrary
   Ethertype. Putting the Ethertype as the zz-zz field after an all
   zeros OUI (00-00-00) does this. It looks like

         xx-xx-AA-AA-03-00-00-00-zz-zz

   where zz-zz was the Ethertype.

      (Note that, at this point, the 802 protocol syntax facilities are
      sufficiently powerful that they could be chained indefinitely.
      Whether support for such chaining is generally required is not
      clear but [802 O&A] requires support for

         xx-xx-AA-AA-03-00-00-00-88-B7-yy-yy-yy-zz-zz

      even though this could be more efficiently expressed by simply
      pinching out the "00-00-00-88-B7" in the middle.)

   As well as appearing to label frame contents, 802 Protocol types
   appear within NBMA (Non-Broadcast Multi-Access) Next Hop Resolution
   Protocol [RFC2332] messages.  Such messages have provisions for both
   two octet Ethertypes and OUI based protocol types.



3.1 Ethernet Protocol Allocation Under the IANA OUI

   Two-octet protocol numbers under the IANA OUI are available, as in

         xx-xx-AA-AA-03-00-00-5E-zz-zz

   A number of such allocations have been made out of the 2**16
   available from 00-00-5E-00-00 to 00-00-5E-FF-FF (see [IANA]).  The
   extreme values of this range, 00-00-5E-00-00 and 00-00-5E-FF-FF are
   reserved and require IESG Ratification for allocation (see Section


D. Eastlake                                                    [Page 13]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   5.1).  New allocations of SNAP SAP protocol (zz-zz) numbers under the
   IANA OUI must meet the following requirements:

      o  the allocation must be for standards use (either for an IETF
         Standard or other standard related to IETF work),

      o  it must be documented in an Internet Draft or RFC, and

      o  such protocol numbers are not to be allocated for any protocol
         that has an Ethertype (because that can be expressed by putting
         an all zeros "OUI" before the Ethertype as described above).

   In addition, the Expert Review (or IESG Ratification for the two
   reserved values) must be obtained using the procedure specified in
   Section 5.1.





































D. Eastlake                                                    [Page 14]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


4. Other OUI Based Parameters

   Some IEEE 802 and other protocols provide for parameters based on an
   OUI beyond those discussed above.  Such parameters most commonly
   consist of an OUI plus one octet of additional value. They are
   usually called "vendor specific" parameters although "organization
   specific" might be more accurate. They would look like

         yy-yy-yy-zz

   where yy-yy-yy is the OUI and zz is the additional specifier.  An
   example is the Cipher Suite Selector in IEEE 802.11 ([802.11] page
   125).

   Values may be allocated under the IANA OUI for such other OUI-based
   parameter usage by Expert Review except that, for each use, the
   additional specifier values consisting of all zero bits and all one
   bits (0x00 and 0xFF for a one octet specifier) are reserved and
   require IESG Ratification (see Section 5.1) for allocation.  The
   allocations must be for standards use (either for an IETF Standard or
   other standard related to IETF work) and be documented in an Internet
   Draft or RFC.  The first time a value is allocated for a particular
   parameter of this type, an IANA registry will be created to contain
   that allocation and any subsequent allocations of values for that
   parameter under the IANA OUI. The Expert will specify the name of the
   registry.

   (If a different policy from that above is required for such a
   parameter, a BCP or standards track RFC must be adopted updating this
   BCP and specifying the new policy and parameter.)






















D. Eastlake                                                    [Page 15]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


5. IANA Considerations

   The entirety of this document concerns IANA Considerations for the
   allocation of Ethernet parameters in connection with the IANA OUI and
   related matters.

   Specifically:

      Section 1.2.1 provides information on the IANA assigned OUI.

      Section 2.1.1 lists current EUI-48 assignments under this OUI.

      Section 2.1.2 specifies IANA considerations for EUI-48
      assignments.

      Section 2.2.2 specifies IANA considerations for EUI-64
      assignments.

      Section 3.1 provides a pointer to current protocol identifier
      assignments under the IANA OUI, and specifies IANA considerations
      for protocol identifier assignments.

      Section 4 briefly provides IANA considerations relating to OUI
      based miscellaneous allocations.



5.1 Expert Review and IESG Ratification

   This section specifies the procedure for Expert Review and IESG
   Ratification of MAC, protocol, and other IANA OUI based identifiers.
   The Expert(s) referred to in this document shall consist of one or
   more persons appointed by and serving at the pleasure of the IESG.
   The procedure described for Expert Review allocations in this
   document is fully consistent with the IANA Expert Review policy
   described in Section 4.1 in [RFC5226].

   While finite, the universe of code points from which Expert judged
   allocations will be made is felt to be sufficiently large that the
   requirements given in this document and the Experts' good judgment
   are sufficient guidance.  The idea is for the Expert to provide a
   light sanity check for small allocations of EUI identifiers with
   increased scrutiny by the Expert for medium size allocations of EUI
   identifiers, allocations of protocol identifiers and, other IANA OUI
   based parameters.  However, it can make sense to allocate very large
   portions of the MAC identifier code point space. (Note that existing
   allocations include one for 1/2 of the entire multicast code point
   space and one for 1/16 of the multicast code point space.) In those
   cases, and in cases of the allocation of "reserved" values, IESG
   Ratification of an Expert Review approval recommendation is required


D. Eastlake                                                    [Page 16]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   as described below.  The procedure is as follows:

      The applicant always completes the appropriate Template from the
         Template Annex below and sends it to IANA <iana@iana.org>.

      IANA always sends the Template to an appointed Expert. If the
         Expert recuses themselves or is non-responsive, IANA may choose
         an alternative appointed Expert or, if none are available, will
         contact the IESG.

      If the allocation is based on Expert Review:
            If IANA receives a disapproval from an Expert selected to
         review an application Template, the application will be denied.
            If IANA receives approval and code points are available,
         IANA will make the requested allocation.

      If the allocation is based on IESG Ratification the procedure
         starts with the first two steps above for Expert Review. If the
         Expert disapproves the application, they simply inform IANA;
         however, if the Expert believes the application should be
         approved or they are uncertain and believes that the
         circumstances warrant the attention of the IESG, the Expert
         will forward the application, together with their reasons for
         approval or uncertainty, to the IESG, which must approve for
         the allocation to be granted. This can be accomplished by a
         management item in an IESG telechat. If the IESG decides not to
         ratify a favorable opinion by the Expert or decides against an
         application where the Expert is uncertain, the application is
         denied, otherwise it is granted.  The IESG will communicate its
         decision to the Expert and to IANA.



5.2 Informational IANA Web Page Material

   IANA also maintains an informational listing on its web site
   concerning Ethertypes, OUIs, and multicast addresses allocated under
   OUIs other than the IANA OUI. IANA shall update that list when
   changes are provided by the Expert.



5.3 OUI Exhaustion

   When the available space for either multicast or unicast EUI-48
   identifiers under OUI 00-00-5E have been 90% or more exhausted, IANA
   should request an additional OUI from the IEEE Registration Authority
   (see Section 1.2) for further IANA allocation use.




D. Eastlake                                                    [Page 17]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


6. Security Considerations

   This document is concerned with allocation of parameters under the
   IANA OUI and closely related matters. It is not directly concerned
   with security.















































D. Eastlake                                                    [Page 18]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


7. Normative References

   [802 O&A]
              "IEEE Standard for Local and Metropolitan Area Networks:
         Overview and Architecture", IEEE 802-2001, 8 March 2002.
              "IEEE Standard for Local and Metropolitan Area Networks:
         Overview and Architecture / Amendment 1: Ethertypes for
         Prototype and Vendor-Specific Protocol Development", IEEE
         802a-2003, 18 September 2003.



8. Informative References

   [802.1Q] "IEEE Standard for Local and metropolitan area networks /
         Virtual Bridged Local Area Networks", IEEE 802.1Q-2005, 19 May
         2006.

   [802.3] "IEEE Standard for Information technology /
         Telecommunications and information exchange between systems /
         Local and metropolitan area networks / Specific requirements /
         Part 3: Carrier sense multiple access with collision detection
         (CSMA/CD) access method and physical layer specifications",
         IEEE 802.3-2005, 9 December 2005.

   [802.11] "IEEE Standard for Information technology /
         Telecommunications and information exchange between systems /
         Local and metropolitan area networks / Specific requirements /
         Part 11: Wireless LAN Medium Access Control (MAC) and Physical
         Layer (PHY) Specifications", IEEE 802.11-2007, 11 June 2007.

   [EUI-64] IEEE, "Guidelines for 64-bit Global Identifier (EUI-64)
         Registration Authority",
         http://standards.ieee.org/regauth/oui/tutorials/EUI64.html,
         March 1997.

   [IANA] Internet Assigned Numbers Authority
         <http://www.iana.org/assignments/ethernet-numbers>.

   [IEEE] Institute of Electrical and Electronics Engineers
         <http://www.ieee.org>.

   [IEEE802] IEEE 802 LAN/MAN (Local Area Network / Metropolitan Area
         Network) Standards Committee <http://www.ieee802.org>.

   [RFC1112] Deering, S., "Host Extensions for IP Multicasting", STD 5,
         RFC 1112, Stanford University, August 1989.

   [RFC1661] Simpson, W., "The Point-to-Point Protocol (PPP)", STD 51,
         RFC 1661, July 1994.


D. Eastlake                                                    [Page 19]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


   [RFC2153] Simpson, W., "PPP Vendor Extensions", RFC 2153, May 1997.

   [RFC2332] Luciani, J., Katz, D., Piscitello, D., Cole, B., and N.
         Doraswamy, "NBMA Next Hop Resolution Protocol (NHRP)", RFC
         2332, April 1998.

   [RFC2464] Crawford, M., "Transmission of IPv6 Packets over Ethernet
         Networks", RFC 2464, December 1998.

   [RFC3768] Hinden, R., "Virtual Router Redundancy Protocol (VRRP)",
         RFC 3768, April 2004.

   [RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing
         Architecture", RFC 4291, February 2006.

   [RFC5214] Templin, F., Gleeson, T., and D. Thaler, "Intra-Site
         Automatic Tunnel Addressing Protocol (ISATAP)", RFC 5214, March
         2008.

   [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
         IANA Considerations Section in RFCs", BCP 26, RFC 5226, May
         2008.

   [RFCxxxx] Eckert, T., E. Rosen, A. Rahul, and Y. Rekhter, "MPLS
         Multicast Encapsulations", RFC xxxx, November 2007 (draft-ietf-
         mpls-multicast-encaps-10.txt approved and in the RFC Editor
         Queue).

























D. Eastlake                                                    [Page 20]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


Template Annex

   This annex provides the specific templates for IANA allocations of
   parameters. Explanatory words in parenthesis in the templates below
   may be deleted in a completed template as submitted to IANA.





EUI-48/EUI-64 Identifier or Identifier Block Template

      Applicant Name:


      Applicant Email:


      Applicant Telephone: (starting with country code)


      Use Name: (brief name of Parameter use such as "Foo Protocol")


      Document: (ID or RFC specifying use to which the identifier or
      block of identifiers will be put.)


      Specify whether this is an application for EUI-48 or EUI-64
      identifiers:


      Size of Block requested: (must be a power of two sized block, can
      be a block of size one (2**0))


      Specify multicast, unicast, or both:















D. Eastlake                                                    [Page 21]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


5-octet Ethernet Protocol Identifier Template

      Applicant Name:


      Applicant Email:


      Applicant Telephone: (starting with country code)


      Use Name: (brief name of use of code point such as "Foo Protocol")


      Document: (ID or RFC specifying use to which the protocol
      identifier will be put.)




Other IANA OUI Based Parameter Template

      Applicant Name:


      Applicant Email:


      Applicant Telephone: (starting with country code)


      Protocol where the OUI Based Parameter for which a value is being
      requested appears: (such as: Cipher Suite selection in IEEE
      802.11)


      Use Name: (brief name of use of code point to be allocated, such
      as "Foo Cipher Suite")


      Document: (ID or RFC specifying use to which the other IANA OUI
      based parameter value will be put.)










D. Eastlake                                                    [Page 22]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


Ethertypes Annex

   This annex lists some Ethertypes specified for IETF Protocols or by
   IEEE 802 as known at the time of publication. A more up-to-date list
   may be available on the IANA web site, currently at [IANA]. See
   Section 3 above.



Some Ethertypes Specified By The IETF

      0x0800  Internet Protocol Version 4 (IPv4)
      0x0806  Address Resolution Protocol (ARP)
      0x0808  Frame Relay ARP
      0x880B  Point-to-Point Tunneling Protocol (PPTP)
      0x880C  General Switch Management Protocol (GSMP)
      0x8035  Reverse Address Resolution Protocol (RARP)
      0x86DD  Internet Protocol Version 6 (IPv6)
      0x8847  MPLS unicast
      0x8848  MPLS multicast
      0x8861  Multicast Channel Allocation Protocol (MCAP).
      0x8863  PPP over Ethernet (PPPoE) Discovery Stage
      0x8864  PPP over Ethernet (PPPoE) Session Stage



Some IEEE 802 Ethertypes

      0x8100  IEEE Std 802.1Q  - Customer VLAN Tag Type (C-Tag, formerly
                                 called the Q-Tag)
      0x8808  IEEE Std 802.3   - Ethernet Passive Optical Network (EPON)
      0x888E  IEEE Std 802.1X  - Port-based network access control
      0x88A8  IEEE Std 802.1Q  - Service VLAN tag identifier (S-Tag)
      0x88B5  IEEE Std 802     - Local Experimental Ethertype
      0x88B6  IEEE Std 802     - Local Experimental Ethertype
      0x88B7  IEEE Std 802     - OUI Extended Ethertype
      0x88C7  IEEE Std 802.11i - Pre-Authentication
      0x88CC  IEEE Std 802.1AB - Link Layer Discovery Protocol (LLDP)
      0x88E5  IEEE Std 802.1AE - Media Access Control Security
      0x88F5  IEEE Std 802.1ak - Multiple VLAN Registration Protocol
                                 (MVRP)
      0x88F6  IEEE Std 802.1Q  - Multiple Multicast Registration
                                 Protocol (MMRP)
      0x890D  IEEE 802.11r     - Fast Roaming Remote Request








D. Eastlake                                                    [Page 23]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


Disclaimer

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.



Additional IPR Provisions

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.











D. Eastlake                                                    [Page 24]

INTERNET-DRAFT     IANA Considerations & IETF Use of IEEE 802 Parameters


Author's Address

   Donald E. Eastlake 3rd
   155 Beaver Street
   Milford, MA 01757 USA

   tel:  +1-508-634-2066
   email: d3e3e3@gmail.com



Expiration and File Name

   This draft expires in December 2008.

   Its file name is draft-eastlake-ethernet-iana-considerations-08.txt.




































D. Eastlake                                                    [Page 25]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/