[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-saintandre-acct-uri) 00 01 02 03 04 05 06 07

Network Working Group                                     P. Saint-Andre
Internet-Draft                                       Cisco Systems, Inc.
Intended status: Standards Track                        October 18, 2012
Expires: April 21, 2013


                         The 'acct' URI Scheme
                     draft-ietf-appsawg-acct-uri-01

Abstract

   This document defines the 'acct' URI scheme as a way to identify a
   user's account at a service provider, irrespective of the particular
   protocols that can be used to interact with the account.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on April 21, 2013.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.





Saint-Andre              Expires April 21, 2013                 [Page 1]

Internet-Draft            The 'acct' URI Scheme             October 2012


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   3.  Definition  . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   4.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 4
   5.  Security Considerations . . . . . . . . . . . . . . . . . . . . 6
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 6
     6.1.  Normative References  . . . . . . . . . . . . . . . . . . . 6
     6.2.  Informative References  . . . . . . . . . . . . . . . . . . 6
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . . . 7
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . . 7







































Saint-Andre              Expires April 21, 2013                 [Page 2]

Internet-Draft            The 'acct' URI Scheme             October 2012


1.  Introduction

   Existing URI schemes that enable interaction with, or that identify
   resources associated with, a user's account at a service provider are
   tied to particular services or application protocols.  Two examples
   are the 'mailto' scheme (which enables interaction with a user's
   email account) and the 'http' scheme (which enables retrieval of web
   files controlled by a user or interaction with interfaces providing
   information about a user).  However, there exists no URI scheme that
   generically identifies a user's account at a service provider without
   specifying a particular protocol to use when interacting with the
   account.  This specification fills that gap.


2.  Rationale

   During formalization of the WebFinger protocol
   [I-D.ietf-appsawg-webfinger], much discussion occurred regarding the
   appropriate URI scheme to include when specifying a user's account as
   a web link [RFC5988].  Although both the 'mailto' [RFC6068] and
   'http' [RFC2616] schemes were proposed, not all service providers
   offer email services or web interfaces on behalf of user accounts
   (e.g., a microblogging or instant messaging provider might not offer
   email services, or an enterprise might not offer HTTP interfaces to
   information about its employees).  Therefore, the discussants
   recognized that it would be helpful to define a URI scheme that could
   be used to generically identify a user's account at a service
   provider, irrespective of the particular application protocols used
   to interact with the account.  The result was the 'acct' URI scheme
   defined in this document.


3.  Definition

   The syntax of the 'acct' URI scheme is defined under Section 4 of
   this document.  Although 'acct' URIs take the form "user@host", the
   scheme is designed for the purpose of identification instead of
   interaction (regarding this distinction, see Section 1.2.2 of
   [RFC3986]).  The "Internet resource" identified by an 'acct' URI is a
   user's account hosted at a service provider, where the service
   provider is typically associated with a DNS domain name.  Thus a
   particular 'acct' URI is formed by setting the "user" portion to the
   user's account name at the service provider and by setting the "host"
   portion to the DNS domain name of the service provider.

   Consider the case of a user with an account name of "foobar" on a
   microblogging service "status.example.net".  It is taken as
   convention that the string "foobar@status.example.net" designates



Saint-Andre              Expires April 21, 2013                 [Page 3]

Internet-Draft            The 'acct' URI Scheme             October 2012


   that account.  This is expressed as a URI using the 'acct' scheme as
   "acct:foobar@status.example.net".

   It is not assumed that an entity will necessarily be able to interact
   with a user's account using any particular application protocol, such
   as email; to enable such interaction, an entity would need to use the
   appropriate URI scheme for such a protocol, such as the 'mailto'
   scheme.  While it might be true that the 'acct' URI minus the scheme
   name (e.g., "user@example.com" derived from "acct:user@example.com")
   can be reached via email or some other application protocol, that
   fact would be purely contingent and dependent upon the deployment
   practices of the provider.

   Because an 'acct' URI enables identification only and not
   interaction, it cannot be deferenced directly.  Any protocol that
   might use the 'acct' URI scheme, such as the WebFinger protocol
   [I-D.ietf-appsawg-webfinger] or the Simple Web Discovery protocol
   [I-D.jones-simple-web-discovery], is responsible for specifying how
   an 'acct' URI is dereferenced in the context of that protocol.  For
   example, an 'acct' URI might be passed as a parameter in an HTTP
   request and the service might retrieve the relevant information
   associated with the account identified by that URI and then provide
   that information to the requesting entity in an HTTP response.


4.  IANA Considerations

   In accordance with the guidelines and registration procedures for new
   URI schemes [RFC4395], this section provides the information needed
   to register the 'acct' URI scheme.

4.1.  URI Scheme Name

   acct

4.2.  Status

   permanent

4.3.  URI Scheme Syntax

   The 'acct' URI syntax is defined here in Augmented Backus-Naur Form
   (ABNF) [RFC5234], borrowing the 'userinfo' and 'host' rules from
   [RFC3986]:

   acctURI      =  "acct" ":" userinfo "@" host





Saint-Andre              Expires April 21, 2013                 [Page 4]

Internet-Draft            The 'acct' URI Scheme             October 2012


4.4.  URI Scheme Semantics

   The 'acct' URI scheme identifies accounts hosted at service
   providers.  It is used only for identification, not interaction.  A
   protocol using the 'acct' URI scheme is responsible for specifying
   how an 'acct' URI is to be dereferenced in the context of that
   protocol.  There is no media type associated with the 'acct' URI
   scheme.

4.5.  Encoding Considerations

   The 'acct' URI scheme allows any character from the Unicode
   repertoire [UNICODE] encoded as UTF-8 [RFC3629] and then percent-
   encoded into valid ASCII [RFC20] as specified in [RFC3986].  Note
   that domain labels need to be encoded as A-labels (see [RFC5890]) in
   order to support internationalized domain names (IDNs).

4.6.  Applications/Protocols That Use This URI Scheme Name

   At the time of this writing, only the WebFinger protocol uses the
   'acct' URI scheme.  However, use is not restricted to the WebFinger
   protocol, and the scheme might be considered for use in other
   protocols, such as Simple Web Discovery.

4.7.  Interoperability Considerations

   There are no known interoperability concerns related to use of the
   'acct' URI scheme.

4.8.  Security Considerations

   See Section 5 of RFCXXXX.  [Note to RFC Editor: please replace XXXX
   with the number issued to this document.]

4.9.  Contact

   Peter Saint-Andre, psaintan@cisco.com

4.10.  Author/Change Controller

   This scheme is registered under the IETF tree.  As such, the IETF
   maintains change control.

4.11.  References

   None.





Saint-Andre              Expires April 21, 2013                 [Page 5]

Internet-Draft            The 'acct' URI Scheme             October 2012


5.  Security Considerations

   Because the 'acct' URI scheme does not directly enable interaction
   with a user's account at a service provider, possible security
   concerns are minimized.

   Protocols that make use of 'acct' URIs are responsible for defining
   security considerations related to such usage, e.g., the risks
   involved in dereferencing an 'acct' URI and the authentication and
   authorization methods that could be used to control access to
   personally identifying information.


6.  References

6.1.  Normative References

   [RFC20]    Cerf, V., "ASCII format for network interchange", RFC 20,
              October 1969.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [UNICODE]  The Unicode Consortium, "The Unicode Standard, Version
              6.1", 2012,
              <http://www.unicode.org/versions/Unicode6.1.0/>.

6.2.  Informative References

   [I-D.ietf-appsawg-webfinger]
              Jones, P., Salgueiro, G., and J. Smarr, "WebFinger",
              draft-ietf-appsawg-webfinger-00 (work in progress),
              July 2012.

   [I-D.jones-simple-web-discovery]
              Jones, M. and Y. Goland, "Simple Web Discovery (SWD)",
              draft-jones-simple-web-discovery-03 (work in progress),
              July 2012.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext



Saint-Andre              Expires April 21, 2013                 [Page 6]

Internet-Draft            The 'acct' URI Scheme             October 2012


              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC4395]  Hansen, T., Hardie, T., and L. Masinter, "Guidelines and
              Registration Procedures for New URI Schemes", BCP 35,
              RFC 4395, February 2006.

   [RFC5890]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Definitions and Document Framework",
              RFC 5890, August 2010.

   [RFC5988]  Nottingham, M., "Web Linking", RFC 5988, October 2010.

   [RFC6068]  Duerst, M., Masinter, L., and J. Zawinski, "The 'mailto'
              URI Scheme", RFC 6068, October 2010.


Appendix A.  Acknowledgements

   The 'acct' URI scheme was originally defined in
   [I-D.ietf-appsawg-webfinger]; the authors of that specification are
   gratefully acknowledged.

   Thanks to Graham Klyne and Barry Leiba for their feedback.


Author's Address

   Peter Saint-Andre
   Cisco Systems, Inc.
   1899 Wynkoop Street, Suite 600
   Denver, CO  80202
   USA

   Email: psaintan@cisco.com

















Saint-Andre              Expires April 21, 2013                 [Page 7]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/