[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-saintandre-xdash-considered-harmful) 00 01 02 03 04 05 RFC 6648

APPSAWG                                                   P. Saint-Andre
Internet-Draft                                       Cisco Systems, Inc.
Intended status: BCP                                          D. Crocker
Expires: September 13, 2012                  Brandenburg InternetWorking
                                                           M. Nottingham
                                                               Rackspace
                                                          March 12, 2012


    Deprecating the X- Prefix and Similar Constructs in Application
                               Protocols
                      draft-ietf-appsawg-xdash-04

Abstract

   Historically, designers and implementers of application protocols
   have often distinguished between "standard" and "non-standard"
   parameters by prefixing the names of "non-standard" parameters with
   the string "X-" or similar constructs.  In practice, that convention
   causes more problems than it solves.  Therefore, this document
   deprecates the convention for the names of newly-defined textual
   parameters in application protocols.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 13, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of



Saint-Andre, et al.    Expires September 13, 2012               [Page 1]

Internet-Draft               Deprecating X-                   March 2012


   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Recommendations for Implementers of Application Protocols  . .  3
   3.  Recommendations for Creators of New Parameters . . . . . . . .  4
   4.  Recommendations for Protocol Designers . . . . . . . . . . . .  4
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . .  4
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  5
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .  5
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  5
     8.1.  Normative References . . . . . . . . . . . . . . . . . . .  5
     8.2.  Informative References . . . . . . . . . . . . . . . . . .  5
   Appendix A.  Background  . . . . . . . . . . . . . . . . . . . . .  8
   Appendix B.  Analysis  . . . . . . . . . . . . . . . . . . . . . .  9
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 12




























Saint-Andre, et al.    Expires September 13, 2012               [Page 2]

Internet-Draft               Deprecating X-                   March 2012


1.  Introduction

   Many application protocols use parameters with textual names to
   identify data (media types, header fields in Internet mail messages
   and HTTP requests, vCard parameters and properties, etc.).
   Historically, designers and implementers of application protocols
   have often distinguished between "standard" and "non-standard"
   parameters by prefixing the names of "non-standard" parameters with
   the string "X-" or similar constructs (e.g., "x."), where the "X" is
   commonly understood to stand for "eXperimental" or "eXtension".  That
   is, instead of just identifying the data, the name also embedded the
   status of the name as "non-standard" into the name itself.

   Although in theory the "X-" convention was a good way to avoid
   collisions (and attendant interoperability problems) between standard
   parameters and non-standard parameters, in practice the benefits have
   been outweighed by the costs associated with the leakage of non-
   standard parameters into the standards space.  Therefore this
   document deprecates the "X-" convention for named parameters in
   application protocols and makes specific recommendations about how to
   proceed in a world without the distinction between standard and non-
   standard parameters.  Note that this document covers only parameters
   with textual names, not parameters that are expressed as numbers.  In
   addition, this document does not recommend against the practice of
   private, local, preliminary, experimental, or implementation-specific
   parameters, only against the use of "X-" and similar constructs in
   the names of such parameters.  Finally, this document makes no
   recommendation as to whether existing "X-" parameters ought to remain
   in use or be migrated to a format without the "X-".

   See Appendix A for background information about the history of the
   "X-" convention, and Appendix B for the reasoning that led to the
   recommendations in this document.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   [RFC2119].


2.  Recommendations for Implementers of Application Protocols

   Implementations of application protocols MUST NOT programatically
   discriminate between "standard" and "non-standard" parameters based
   solely on the names of such parameters (i.e., based solely on whether
   the name begins with 'x-' or a similar string of characters).





Saint-Andre, et al.    Expires September 13, 2012               [Page 3]

Internet-Draft               Deprecating X-                   March 2012


3.  Recommendations for Creators of New Parameters

   Creators of new parameters to be used in the context of application
   protocols:

   1.  SHOULD assume that all parameters they create might become
       standardized, public, commonly deployed, or used across multiple
       implementations.

   2.  SHOULD employ meaningful names that they have reason to believe
       are currently unused (without the "X-" prefix or similar
       constructs).

   Note: If the relevant parameter name space has conventions about
   associating parameter names with those who create them, a parameter
   name could incorporate the organization's name or primary domain name
   (see Appendix B for examples).


4.  Recommendations for Protocol Designers

   Designers of new application protocols that allow extensions using
   parameters:

   1.  SHOULD establish registries with potentially unlimited value-
       spaces, if appropriate including both permanent and provisional
       registries.

   2.  SHOULD define simple, clear registration procedures.

   3.  SHOULD mandate registration of all non-private parameters,
       independent of the form of the parameter names.

   4.  SHOULD NOT prohibit parameters with the "X-" prefix or similar
       constructs from being registered with the IANA.

   5.  MUST NOT assume that a parameter with an "X-" prefix or similar
       constructs is non-standard.

   6.  MUST NOT assume that a parameter without an "X-" prefix or
       similar constructs is standard.


5.  Security Considerations

   Interoperability and migration issues with security-critical
   parameters can result in unnecessary vulnerabilities (see Appendix B
   for further discussion).



Saint-Andre, et al.    Expires September 13, 2012               [Page 4]

Internet-Draft               Deprecating X-                   March 2012


   As a corollary to the recommendation provided under Section 2,
   implementations MUST NOT assume that "standard" parameters are
   "secure" whereas "non-standard" parameters are "insecure", based
   solely on the names of such parameters.


6.  IANA Considerations

   This document does not modify registration procedures currently in
   force for various application protocols.  However, such procedures
   might be updated in the future to incorporate the best practices
   defined in this document.


7.  Acknowledgements

   Thanks to Claudio Allocchio, Adam Barth, Nathaniel Borenstein, Eric
   Burger, Stuart Cheshire, Al Constanzo, Dave Cridland, Martin Duerst,
   Frank Ellermann, J.D. Falk, Ned Freed, Tony Finch, Randall Gellens,
   Tony Hansen, Ted Hardie, Joe Hildebrand, Alfred Hoenes, Paul Hoffman,
   Eric Johnson, Scott Kelly, Scott Kitterman, John Klensin, Graham
   Klyne, Murray Kucherawy, Eliot Lear, John Levine, Bill McQuillan,
   Alexey Melnikov, Subramanian Moonesamy, Keith Moore, Ben Niven-
   Jenkins, Zoltan Ordogh, Tim Petch, Dirk Pranke, Randy Presuhn, Julian
   Reschke, Doug Royer, Andrew Sullivan, Martin Thomson, Matthew Wild,
   Nicolas Williams, Tim Williams, Mykyta Yevstifeyev, and Kurt Zeilenga
   for their feedback.


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

8.2.  Informative References

   [BCP9]     Bradner, S., "The Internet Standards Process -- Revision
              3", BCP 9, RFC 2026, October 1996.

   [BCP26]    Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [BCP82]    Narten, T., "Assigning Experimental and Testing Numbers
              Considered Useful", BCP 82, RFC 3692, January 2004.




Saint-Andre, et al.    Expires September 13, 2012               [Page 5]

Internet-Draft               Deprecating X-                   March 2012


   [RFC691]   Harvey, B., "One more try on the FTP", RFC 691, June 1975.

   [RFC737]   Harrenstien, K., "FTP extension: XSEN", RFC 737,
              October 1977.

   [RFC743]   Harrenstien, K., "FTP extension: XRSQ/XRCP", RFC 743,
              December 1977.

   [RFC775]   Mankins, D., Franklin, D., and A. Owen, "Directory
              oriented FTP commands", RFC 775, December 1980.

   [RFC822]   Crocker, D., "Standard for the format of ARPA Internet
              text messages", STD 11, RFC 822, August 1982.

   [RFC1123]  Braden, R., "Requirements for Internet Hosts - Application
              and Support", STD 3, RFC 1123, October 1989.

   [RFC1154]  Robinson, D. and R. Ullmann, "Encoding header field for
              internet messages", RFC 1154, April 1990.

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2046]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part Two: Media Types", RFC 2046,
              November 1996.

   [RFC2047]  Moore, K., "MIME (Multipurpose Internet Mail Extensions)
              Part Three: Message Header Extensions for Non-ASCII Text",
              RFC 2047, November 1996.

   [RFC2068]  Fielding, R., Gettys, J., Mogul, J., Nielsen, H., and T.
              Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1",
              RFC 2068, January 1997.

   [RFC2426]  Dawson, F. and T. Howes, "vCard MIME Directory Profile",
              RFC 2426, September 1998.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC2822]  Resnick, P., "Internet Message Format", RFC 2822,
              April 2001.

   [RFC2939]  Droms, R., "Procedures and IANA Guidelines for Definition
              of New DHCP Options and Message Types", BCP 43, RFC 2939,



Saint-Andre, et al.    Expires September 13, 2012               [Page 6]

Internet-Draft               Deprecating X-                   March 2012


              September 2000.

   [RFC3406]  Daigle, L., van Gulik, D., Iannella, R., and P. Faltstrom,
              "Uniform Resource Names (URN) Namespace Definition
              Mechanisms", BCP 66, RFC 3406, October 2002.

   [RFC3427]  Mankin, A., Bradner, S., Mahy, R., Willis, D., Ott, J.,
              and B. Rosen, "Change Process for the Session Initiation
              Protocol (SIP)", RFC 3427, December 2002.

   [RFC3864]  Klyne, G., Nottingham, M., and J. Mogul, "Registration
              Procedures for Message Header Fields", BCP 90, RFC 3864,
              September 2004.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC4122]  Leach, P., Mealling, M., and R. Salz, "A Universally
              Unique IDentifier (UUID) URN Namespace", RFC 4122,
              July 2005.

   [RFC4288]  Freed, N. and J. Klensin, "Media Type Specifications and
              Registration Procedures", BCP 13, RFC 4288, December 2005.

   [RFC4395]  Hansen, T., Hardie, T., and L. Masinter, "Guidelines and
              Registration Procedures for New URI Schemes", BCP 35,
              RFC 4395, February 2006.

   [RFC4512]  Zeilenga, K., "Lightweight Directory Access Protocol
              (LDAP): Directory Information Models", RFC 4512,
              June 2006.

   [RFC4566]  Handley, M., Jacobson, V., and C. Perkins, "SDP: Session
              Description Protocol", RFC 4566, July 2006.

   [RFC5064]  Duerst, M., "The Archived-At Message Header Field",
              RFC 5064, December 2007.

   [RFC5451]  Kucherawy, M., "Message Header Field for Indicating
              Message Authentication Status", RFC 5451, April 2009.

   [RFC5646]  Phillips, A. and M. Davis, "Tags for Identifying
              Languages", BCP 47, RFC 5646, September 2009.

   [RFC5727]  Peterson, J., Jennings, C., and R. Sparks, "Change Process
              for the Session Initiation Protocol (SIP) and the Real-
              time Applications and Infrastructure Area", BCP 67,



Saint-Andre, et al.    Expires September 13, 2012               [Page 7]

Internet-Draft               Deprecating X-                   March 2012


              RFC 5727, March 2010.


Appendix A.  Background

   The beginnings of the "X-" convention can be found in a suggestion
   made by Brian Harvey in 1975 with regard to FTP parameters [RFC691]:

      Thus, FTP servers which care about the distinction between Telnet
      print and non-print could implement SRVR N and SRVR T. Ideally the
      SRVR parameters should be registered with Jon Postel to avoid
      conflicts, although it is not a disaster if two sites use the same
      parameter for different things.  I suggest that parameters be
      allowed to be more than one letter, and that an initial letter X
      be used for really local idiosyncracies.

   This "X" prefix was subsequently used in [RFC737], [RFC743], and
   [RFC775].  This usage was noted in [RFC1123]:

      FTP allows "experimental" commands, whose names begin with "X".
      If these commands are subsequently adopted as standards, there may
      still be existing implementations using the "X" form....  All FTP
      implementations SHOULD recognize both forms of these commands, by
      simply equating them with extra entries in the command lookup
      table.

   The "X-" convention has been used for email header fields since at
   least the publication of [RFC822] in 1982, which distinguished
   between "Extension-fields" and "user-defined-fields" as follows:

      The prefatory string "X-" will never be used in the names of
      Extension-fields.  This provides user-defined fields with a
      protected set of names.

   That rule was restated by [RFC1154] as follows:

      Keywords beginning with "X-" are permanently reserved to
      implementation-specific use.  No standard registered encoding
      keyword will ever begin with "X-".

   This convention continued with various specifications for media types
   ([RFC2045], [RFC2046], [RFC2047]), HTTP headers ([RFC2068],
   [RFC2616]), vCard parameters and properties ([RFC2426]), Uniform
   Resource Names ([RFC3406]), LDAP field names ([RFC4512]), and other
   application technologies.

   However, use of the "X-" prefix in email headers was effectively
   deprecated between the publication of [RFC822] in 1982 and the



Saint-Andre, et al.    Expires September 13, 2012               [Page 8]

Internet-Draft               Deprecating X-                   March 2012


   publication of [RFC2822] in 2001 by removing the distinction between
   the "extension-field" construct and the "user-defined-field"
   construct (a similar change happened with regard to Session
   Initiation Protocol "P-" headers when [RFC3427] was obsoleted by
   [RFC5727]).

   Despite the fact that parameters containing the "X-" string have been
   effectively deprecated in email headers, they continue to be used in
   a wide variety of application protocols.  The two primary situations
   motivating such use are:

   1.  Experiments that are intended to possibly be standardized in the
       future, if they are successful.

   2.  Extensions that are intended to never be standardized because
       they are intended only for implementation-specific use or for
       local use on private networks.

   Use of this naming convention is not mandated by the Internet
   Standards Process [BCP9] or IANA registration rules [BCP26].  Rather
   it is an individual choice by each specification that references the
   convention or each administrative process that chooses to use it.  In
   particular, some standards-track RFCs have interpreted the convention
   in a normative way (e.g., [RFC822] and [RFC5451]).


Appendix B.  Analysis

   The primary problem with the "X-" convention is that non-standard
   parameters have a tendency to leak into the protected space of
   standard parameters (whether de jure or de facto), thus introducing
   the need for migration from the "X-" name to the standard name.
   Migration, in turn, introduces interoperability issues (and sometimes
   security issues) because older implementations will support only the
   "X-" name and newer implementations might support only the standard
   name.  To preserve interoperability, newer implementations simply
   support the "X-" name forever, which means that the non-standard name
   has become a de facto standard (thus obviating the need for
   segregation of the name space into "standard" and "non-standard"
   areas in the first place).

   We have already seen this phenomenon at work with regard to FTP in
   the quote from [RFC1123] in the previous section.  The HTTP community
   had the same experience with the "x-gzip" and "x-compress" media
   types, as noted in [RFC2068]:






Saint-Andre, et al.    Expires September 13, 2012               [Page 9]

Internet-Draft               Deprecating X-                   March 2012


      For compatibility with previous implementations of HTTP,
      applications should consider "x-gzip" and "x-compress" to be
      equivalent to "gzip" and "compress" respectively.

   A similar example can be found in [RFC5064], which defined the
   "Archived-At" message header field but also found it necessary to
   define and register the "X-Archived-At" field:

      For backwards compatibility, this document also describes the
      X-Archived-At header field, a precursor of the Archived-At header
      field.  The X-Archived-At header field MAY also be parsed, but
      SHOULD NOT be generated.

   One of the original reasons for segregation of name spaces into
   standard and non-standard areas was the perceived difficulty of
   registering names.  However, the solution to that problem has been
   simpler registration rules, such as those provided by [RFC3864] and
   [RFC4288].  As explained in [RFC4288]:

      [W]ith the simplified registration procedures described above for
      vendor and personal trees, it should rarely, if ever, be necessary
      to use unregistered experimental types.  Therefore, use of both
      "x-" and "x." forms is discouraged.

   For some name spaces, another helpful practice has been the
   establishment of separate registries for permanent names and
   provisional names, as in [RFC4395].

   Furthermore, often standardization of a non-standard parameter leads
   to subtly different behavior (e.g., the standard version might have
   different security properties as a result of security review provided
   during the standardization process).  If implementers treat the old,
   non-standard parameter and the new, standard parameter as equivalent,
   interoperability and security problems can ensue.  Analysis of non-
   standard parameters to detect and correct flaws is in general a good
   thing and is not intended to be discouraged by the lack of
   distinction in element names.  Whenever an originally non-standard
   parameter or protocol element is standardized and the new form has
   differences which affect interoperability or security properties,
   implementations MUST NOT treat the old form as identical to the new
   form.

   For similar considerations with regard to the "P-" convention in the
   Session Initiation Protocol, see [RFC5727].

   In some situations, segregating the parameter name space used in a
   given application protocol can be justified:




Saint-Andre, et al.    Expires September 13, 2012              [Page 10]

Internet-Draft               Deprecating X-                   March 2012


   1.  When it is extremely unlikely that some parameters will ever be
       standardized.  In this case implementation-specific and private-
       use parameters could at least incorporate the organization's name
       (e.g., "ExampleInc-foo" or, consistent with [RFC4288],
       "VND.ExampleInc.foo") or primary domain name (e.g.,
       "com.example.foo" or a Uniform Resource Identifier [RFC3986] such
       as "http://example.com/foo").  In rare cases, truly experimental
       parameters could be given meaningless names such as nonsense
       words, the output of a hash function, or UUIDs [RFC4122].

   2.  When parameter names might have significant meaning.  This case
       too is rare, since implementers can almost always find a synonym
       for an existing term (e.g., "urgency" instead of "priority") or
       simply invent a more creative name (e.g., "get-it-there-fast").
       The existence of multiple similarly-named paramaters can be
       confusing, but this is true regardless if there is an attempt to
       segregate standard and non-standard (e.g., "X-Priority" can be
       confused with "Urgency").

   3.  When parameter names need to be very short (e.g., as in [RFC5646]
       for language tags).  In this case it can be more efficient to
       assign numbers instead of human-readable names (e.g., as in
       [RFC2939] for DCHP options) and to leave a certain numeric range
       for implementation-specific extensions or private use (e.g., as
       with the codec numbers used with the Session Description Protocol
       [RFC4566]).

   There are three primary objections to deprecating the "X-" convention
   as a best practice for application protocols:

   1.  Implementers might mistake one parameter for another parameter
       that has a similar name; a rigid distinction such as an "X-"
       prefix can make this clear.  However, in practice implementers
       are forced to blur the distinction (e.g., by treating "X-foo" as
       a de facto standard) and so it inevitably becomes meaningless.

   2.  Collisions are undesirable and it would be bad for both a
       standard parameter "foo" and a non-standard parameter "foo" to
       exist simultaneously.  However, names are almost always cheap, so
       an experimental, implementation-specific, or private-use name of
       "foo" does not prevent a standards development organization from
       issuing a similarly creative name such as "bar".

   3.  [BCP82] is entitled "Assigning Experimental and Testing Numbers
       Considered Useful" and therefore implies that the "X-" prefix is
       also useful for experimental parameters.  However, BCP 82
       addresses the need for protocol numbers when the pool of such
       numbers is strictly limited (e.g., DHCP options) or when a number



Saint-Andre, et al.    Expires September 13, 2012              [Page 11]

Internet-Draft               Deprecating X-                   March 2012


       is absolutely required even for purely experimental purposes
       (e.g., the Protocol field of the IP header).  In almost all
       application protocols that make use of protocol parameters
       (including email headers, media types, HTTP headers, vCard
       parameters and properties, URNs, and LDAP field names), the name
       space is not limited or constrained in any way, so there is no
       need to assign a block of names for private use or experimental
       purposes (see also [BCP26]).

   Therefore it appears that segregating the parameter space into a
   standard area and a non-standard area has few if any benefits, and
   has at least one significant cost in terms of interoperability.


Authors' Addresses

   Peter Saint-Andre
   Cisco Systems, Inc.
   1899 Wynkoop Street, Suite 600
   Denver, CO  80202
   USA

   Phone: +1-303-308-3282
   Email: psaintan@cisco.com


   D. Crocker
   Brandenburg InternetWorking
   675 Spruce Dr.
   Sunnyvale
   USA

   Phone: +1.408.246.8253
   Email: dcrocker@bbiw.net
   URI:   http://bbiw.net


   Mark Nottingham
   Rackspace

   Email: mnot@mnot.net
   URI:   http://www.mnot.net









Saint-Andre, et al.    Expires September 13, 2012              [Page 12]


Html markup produced by rfcmarkup 1.108, available from http://tools.ietf.org/tools/rfcmarkup/