[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-chown-dhc-dual-stack) 00 01 02 03 04 RFC 4477

Dynamic Host Congiguration                                      T. Chown
Internet-Draft                                 University of Southampton
Expires: January 17, 2005                                      S. Venaas
                                                                 UNINETT
                                                               C. Strauf
                                       Technical University of Clausthal
                                                           July 19, 2004



                 DHCP: IPv4 and IPv6 Dual-Stack Issues
                      draft-ietf-dhc-dual-stack-01


Status of this Memo


   By submitting this Internet-Draft, I certify that any applicable
   patent or other IPR claims of which I am aware have been disclosed,
   and any of which I become aware will be disclosed, in accordance with
   RFC 3668.


   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.


   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."


   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.


   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


   This Internet-Draft will expire on January 17, 2005.


Copyright Notice


   Copyright (C) The Internet Society (2004).  All Rights Reserved.


Abstract


   A node may have support for communications using IPv4 and/or IPv6
   protocols.  Such a node may wish to obtain IPv4 and/or IPv6
   configuration settings via the Dynamic Host Configuration Protocol
   (DHCP).  The original version of DHCP [1] designed for IPv4 has now
   been complemented by a new DHCPv6 [4] for IPv6.  This document
   describes issues identified with dual IP version DHCP interactions,




Chown, et al.           Expires January 17, 2005                [Page 1]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   the most important aspect of which is how to handle potential
   problems in clients processing configuration information received
   from DHCPv4 and DHCPv6 servers.


Table of Contents


   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Configuration scenarios  . . . . . . . . . . . . . . . . . . .  3
   3.  Dual-stack issues  . . . . . . . . . . . . . . . . . . . . . .  4
     3.1   Handling multiple responses  . . . . . . . . . . . . . . .  4
     3.2   Different administrative management  . . . . . . . . . . .  4
     3.3   Multiple interfaces  . . . . . . . . . . . . . . . . . . .  5
     3.4   DNS load balancing . . . . . . . . . . . . . . . . . . . .  5
     3.5   DNS search path issues . . . . . . . . . . . . . . . . . .  5
     3.6   Protocol startup sequence  . . . . . . . . . . . . . . . .  5
     3.7   DHCP option variations . . . . . . . . . . . . . . . . . .  5
     3.8   Security issues  . . . . . . . . . . . . . . . . . . . . .  6
   4.  Potential solutions  . . . . . . . . . . . . . . . . . . . . .  6
     4.1   Separate DHCP servers  . . . . . . . . . . . . . . . . . .  6
     4.2   Single DHCPv6 server . . . . . . . . . . . . . . . . . . .  7
     4.3   Administrative and other areas . . . . . . . . . . . . . .  8
   5.  Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . . 10
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 10
   8.  Informative References . . . . . . . . . . . . . . . . . . . . 10
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 11
       Intellectual Property and Copyright Statements . . . . . . . . 12

























Chown, et al.           Expires January 17, 2005                [Page 2]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



1.  Introduction


   The original specification of the Dynamic Host Configuration Protocol
   (DHCP) was made with only IPv4 in mind.  That specification has been
   subsequently revised, up to the latest version of DHCP [1].  With the
   arrival of IPv6, a new DHCP specification for IPv6 has been designed,
   and published as DHCPv6 [4].


   These protocols allow nodes to communicate via IPv4 or IPv6 to
   retrieve configuration settings for operation in a managed
   environment.  While an IPv6 node may acquire address-related
   configuration settings via IPv6 stateless address autoconfiguration
   [2], such a node may wish to use stateless DHCPv6 [5] for other
   administratively configured options (e.g.  DNS, NTP).


   In early IPv6 deployments, a dual-stack mode of operation is
   typically used.  There will thus be nodes that require both IPv4 and
   IPv6 configuration settings.  This document discusses issues with
   obtaining such settings in a dual-stack environment.


   In this document, we refer to a "DHCP server" as a server
   implementing the original DHCP [1], and a "DHCPv6 server" as a server
   implementing DHCPv6 [4] or its stateless subset [5].


2.  Configuration scenarios


   For a node in an IPv4-only or IPv6-only environment, the choice of
   DHCP server is a straightforward one; a DHCP server for IPv4, or a
   DHCPv6 server for IPv6.


   In a dual-stack environment a node in a managed environment will need
   to obtain both IPv4 and IPv6 configuration settings, e.g.


   o  IPv4 address


   o  IPv6 address


   o  NTP server


   o  DNS server


   o  NIS server


   o  DNS search path


   While the format of address settings will be IP-specific, the node
   may equally well acquire IPv4 or IPv6 addresses for some settings,
   e.g.  for DNS or NTP, if those services are available via IPv4 or




Chown, et al.           Expires January 17, 2005                [Page 3]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   IPv6 transport.  Currently, a DHCP server returns IPv4 data, while a
   DHCPv6 server returns IPv6 data.


   It is worth noting that in an IPv4 environment, with a DHCP server,
   the choice of whether to use DHCP is made by the node.  In an IPv6
   environment, the use of the managed and other bits in the Router
   Advertisement can offer a hint to the node whether or not to use full
   DHCPv6 or its stateless variant.  It is perhaps not clear whether a
   dual-stack node should do DHCP for IPv4 if Managed and OtherConfig
   flags in the Router Advertisement are both off; it seems most
   appropriate that the decision to use DHCP for IPv4 or not should be
   as if the host was IPv4-only.


3.  Dual-stack issues


   In this section we list issues that have been raised to date related
   to dual-stack DHCP operation.


   It has been noted from comments that the first four, and possibly
   five, subsections here may also be viewed as multihoming issues.


3.1  Handling multiple responses


   The general question is how to handle configuration information that
   may be gathered from multiple sources.  Where those sources are DHCP
   and DHCPv6 servers (which may be two physical nodes or two servers
   running on the same node) the client node needs to know whether to
   use the most recent data, or whether to perform some merger or union
   of the responses by certain rules.  A node may choose to ask a DHCPv6
   server and only use a DHCP server if no response is received.


   Merging is possible, but is likely to be complex.  There could be
   some priority, so that if both DHCP and DHCPv6 servers offer a value,
   only one is used.  Or the node could choose to store and use both, in
   some order of its choosing.


   A node may also obtain information from other sources, e.g.  a manual
   configuration file (e.g.  /etc/resolv.conf for DNS data on many Unix
   systems).  A node configured manually to use an IPv6 DNS server via
   such manual configuration may lose that configuration if it then uses
   DHCP to obtain IPv4 settings if in a dual-stack environment; that
   IPv4 configuration may then overwrite the manual IPv6 DNS setting
   with new IPv4 settings from the DHCP response.


3.2  Different administrative management


   In some deployments, the IPv4 and IPv6 services may not be
   administered by the same organisation or people, e.g.  in a community




Chown, et al.           Expires January 17, 2005                [Page 4]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   wireless environment.  This poses problems for consistency of data
   offered by either DHCP version.


3.3  Multiple interfaces


   A node may have multiple interfaces and run IPv4 and IPv6 on
   different interfaces.  A question then is whether the settings are
   per interface or per node?   DHCPv6 introduces the idea of a DHCP
   Unique Identifier (DUID) which does not yet exist for DHCP; some
   effort is being made to retrofit the concept to DHCPv4 [6].


   Per interface settings can be complex because a client node needs to
   know from which interface system settings like NTP server came from.
   And it may not be apparent which setting should be used, if e.g.  an
   NTP server option is received on multiple interfaces, potentially
   over different protocols.


3.4  DNS load balancing


   In some cases it is preferable to list DNS server information in an
   ordered way per node for load balancing, giving different responses
   to different clients.  Responses from different DHCP and DHCPv6
   servers may make such configuration problematic.


3.5  DNS search path issues


   The DNS search path may vary for administrative reasons.  For
   example, a site under the domain foo.com chooses to place an early
   IPv6 deployment under the subdomain ipv6.foo.com, until it is
   confident of offering a full dual-stack service under its main
   domain.  The subtlety here is that the DNS search path then affects
   choice of protocol used, e.g.  IPv6 for nodes in ipv6.foo.com.


3.6  Protocol startup sequence


   In the dual-stack environment, one needs to consider what happens if,
   for example, the IPv6 interface (transport) is started after DHCPv4
   was used to configure the client.  Should the client then simply
   discard the current IPv4 information, or merge it with a subsequent
   IPv6 response?


3.7  DHCP option variations


   Some options in DHCP are not available in DHCPv6 and vice-versa.
   Some IP-version limitations naturally apply, e.g.  only IPv6
   addresses can be in an IPv6 NTP option.  The DHCP and DHCPv6 option
   numbers may be different.





Chown, et al.           Expires January 17, 2005                [Page 5]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   There may be some sites that would choose to use IPv4-mapped
   addresses in DHCPv6-based options.  The merits and drawbacks of such
   an approach need discussion.


   A site administrator may wish to configure all their dual-stack nodes
   with (say) two NTP servers, one of which has an IPv4 address, the
   other an IPv6 address.  In this case it may be desirable for an NTP
   option to carry a list of addresses, where some may be IPv4 and some
   may be IPv6.  In general one could consider having DHCPv6 options
   that can carry mix of IPv4 and IPv6 addresses.


3.8  Security issues


   At this stage in the formation of this draft no specific security
   issues have been raised.  The authors welcome comments on this,
   should such issues exist.


   While there is a specification for authentication for DHCP messages
   [3], the standard seems to have very few, if any, implementations.
   Thus DHCP and DHCPv6 servers are still liable to be spoofed.  Adding
   an additional protocol may give an extra avenue for attack, should an
   attacker perhaps spoof a DHCPv6 server but not a DHCP server.


4.  Potential solutions


   While this document did not originally intend to have solutions in
   its scope, we discuss potential solution spaces in brief here in
   order to provoke some discussion of the issues.  If separate solution
   document(s) emerge, these notes may be removed from this document;
   alternatively this document could be expanded to become a best
   practice guide.  Comments on this are welcomed.


4.1  Separate DHCP servers


   One solution is to run separate DHCP and DHCPv6 servers.  These may
   or may not be run on the same physical node.  The information served
   from the DHCP servers could be generated from a single database
   instance for consistency.


   In this approach, some best practice guidance is required for how
   multiple responses are handled or merged.  Administrators have the
   onus to maintain consistency (e.g.  scripts may generate common DHCP
   and DHCPv6 configuration files).


   In some cases, inconsistencies may not matter.  In a simple case, an
   NTP server will give the same time whether accessed by IPv4 or IPv6.
   Even if different recursive DNS servers are offered via DHCP or
   DHCPv6, those name servers will provide the same response to a given




Chown, et al.           Expires January 17, 2005                [Page 6]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   query.  The order of DNS servers in a node's configuration is not
   important, unless DNS load balancing is required.


   In other cases, inconsistencies may be an issue, e.g.  where lists of
   values are returned, an algorithm is needed for list merger (e.g.
   "alternate, DHCPv6 first").  Or there may be incompatible
   configuration values where, for example, DHCPv6 supplies domain names
   (such the SMTP or POP servers) whereas DHCPv4 provided only IPv4
   addresses.


   In the case of separate servers, there are some options like DNS
   search path, that aren't used in a specific IP protocol context.


   The multiple server approach will have some simplifications.  The
   DHCPv4 and DHCPv6 servers may provide the same value for a particular
   parameter, in which case there is no conflict.  In some cases the
   value may be different, but the effect should be the same (e.g.  NTP
   server).  The crux of the issue is to identify where differences may
   occur and where these differences will have an impact on node
   behaviour.


   One possible solution is to have per-host preferences, or an ordered
   list of preferences, e.g.  "use manually configured"", "prefer
   DHCPv4", or "prefer DHCPv6"", assuming the host can act based upon
   which protocol is used.  It is then up to the site administrator to
   ensure values returned from either DHCP are consistent (a principle
   which extends if other methods are used, e.g.  NIS or SLP).


4.2  Single DHCPv6 server


   There is an argument for not having to configure and operate both
   DHCP and DHCPv6 servers in a dual-stack site environment.  The use of
   both servers may also lead to some redundancy in the information
   served.  Thus one solution may be to modify DHCPv6 to be able to
   return IPv4 information.  This solution is hinted at in the DHCPv6
   [4] specification: "If there is sufficient interest and demand,
   integration can be specified in a document that extends DHCPv6 to
   carry IPv4 addresses and configuration information." This solution
   may allow DHCP for IPv4 to be completely replaced by DHCPv6 with
   additional IPv4 information options, for dual-stack nodes.


   A general argument is that which DHCP protocol is used (whether it's
   over IPv4 or IPv6) shouldn't affect what kind of addresses you can
   get configured with it, and that simplicity and predicatability comes
   from using a single server over a single transport.  IPv4-capable
   hosts will likely remain for at least 10 years, probably much longer;
   do we want dual-stack hosts (which will become the norm) to do both
   DHCPv4 and DHCPv6 forever while dual-stack? If you need both servers




Chown, et al.           Expires January 17, 2005                [Page 7]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   to configure interfaces with addresses, and get other configuration,
   then you rely on two separate protocols to work (servers and relays,
   etc) in order for the host to behave correctly.


   This approach may require the listing of a mix of IPv4 and IPv6
   addresses for an option.  This should be considered when new IPv6
   options are introduced.  There could be just two options needed, one
   new option for the address delegation, and one for doing
   encapsulation.


   Also, there are a number of paradigms in DHCPv6 that we miss in
   DHCPv4, e.g.  going away from using MAC addresses for per-host
   address assignment but instead using DUIDs/IAIDs, etc (although there
   is ongoing work to provide DUIDs for DHCPv4 [6]).


   However, there are a number of potential problems with this approach:


   o  IPv4-only nodes would not have any DHCP service available to them;
      such an approach is only possible in a fully dual-stack
      environment.


   o  The client node may then be IPv6-only and receiving IPv4
      configuration settings that it does not want or be able to
      meaningfully handle.


   o  The DHCPv4 servers need to be configured anyway to support
      IPv4-only hosts, so there is still duplication of information.


   o  What happens if there are DHCPv6 servers that don't return IPv4
      information? Does this mean the client can't run IPv4 (since it
      won't do DHCPv4)?


   o  If IPv4 information is served from a DHCPv6 server as well as an
      IPv4 DHCP server, IPv4 address space will need to be allocated to
      both servers, fragmenting the potentially precious IPv4 global
      address resource for the site.



4.3  Administrative and other areas


   There are also administrative issues or best practice that could be
   promoted.  For example, it may be recommended that sites do not split
   their DNS name space for IPv6-specific testbeds.


   It may be worth considering whether separate manual configuration
   files should be kept for IPv4 and IPv6 settings, e.g.  separate /etc/
   resolv.conf files for DNS settings on Unix systems.  However, this
   seems a complex solution that should be better solved by other more




Chown, et al.           Expires January 17, 2005                [Page 8]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   generalised methods.


   Some differences in DHCP and DHCPv6 may not be reconciled, but may
   not need to be, e.g.  different ways to assign addresses by DUID in
   DHCPv6, or the non-aligned option numbers for DHCP and DHCPv6.


5.  Summary


   There are a number of issues in the operation of DHCP and DHCPv6
   servers for nodes in dual-stack environments that should be
   clarified.  While some differences in the protocols may not be
   reconciled, there may not be a need to do so.  However, for general
   operation some best practice should be agreed, the principle choice
   being whether separate DHCP and DHCPv6 servers should be maintained
   by a site, or whether DHCPv6 should be extended to carry IPv4
   configuration settings for dual-stack nodes.


   It can certainly be argued that until a site is completely
   dual-stack, an IPv4 DHCP service will always be required (e.g.  while
   there are still legacy printers, IP webcams or devices which still
   configure via DHCPv4), and a single IPv6 transport DHCP server
   offering configuration information for both protocols will then not
   be sufficient.  In that case, there is a good rationale for focusing
   effort on how to combine the information received from separate IPv4
   DHCP and (stateless) DHCPv6 servers.


   In theory, it should be relatively straightforward to write a
   configuration manager that would accept a single configuration
   specification from the service manager and distribute the correct
   (and consistent) configurations to the DHCPv4 and DHCPv6 servers
   (whether on the same host or not).  In this case, maintaining
   coordinated configurations in two servers is an interface issue, not
   a protocol issue.  The question then is whether the client has all
   the information it needs to make reasonable choices.  We are aware of
   one implementation of separate DHCPv4 and DHCPv6 clients that is
   using a preference option for assisting client-side merging of the
   received information.


   Another issue for discussion is whether a combined DHCP service only
   available over IPv6 transport is a desirable longer-term goal for
   networks containing only dual-stack or IPv6-only nodes (or IPv4-only
   nodes where DHCPv4 is not needed).  The transition to the long-term
   position may easily take more than 10 years.


   This work has overlap with multihoming and multi-interface
   configuration issues.  It is also interwoven with the Detecting
   Network Attachment area, e.g.  where a node may move from an
   IPv4-only network to a dual-stack network, or vice versa.  Both




Chown, et al.           Expires January 17, 2005                [Page 9]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



   aspects may be best abstracted for discussion in the IETF multi6 and
   dna WGs for discussion.


   The authors also noted that the original working title of the draft
   was not as appropriate as it might be; we have thus renamed it "DHCP:
   IPv4 and IPv6 Dual-Stack Issues".  We are open to further renaming if
   comments warrant it.


   There is not a full consensus in the DHC WG on solutions for the DHCP
   dual-stack configuration issue at present.  This text is intended to
   provoke discussion towards a consensus, and it may then document that
   consensus and the reasons behind it for future reference.


6.  Security Considerations


   There are no security considerations in this problem statement per
   se, as it does not propose a new protocol.


7.  Acknowledgements


   The authors thank the following people for input to this draft:
   Bernie Volz, AK Vijayabhaskar, Ted Lemon, Ralph Droms, Robert Elz,
   Changming Liu, Margaret Wasserman and Greg Daley.  The draft may not
   fully reflect the views of each of these individuals.


   The authors would also like to thank colleagues on the 6NET project
   for contributions to this draft.


8  Informative References


   [1]  Droms, R., "Dynamic Host Configuration Protocol", RFC 2131,
        March 1997.


   [2]  Thomson, S. and T. Narten, "IPv6 Stateless Address
        Autoconfiguration", RFC 2462, December 1998.


   [3]  Droms, R. and W. Arbaugh, "Authentication for DHCP Messages",
        RFC 3118, June 2001.


   [4]  Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C. and M.
        Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)",
        RFC 3315, July 2003.


   [5]  Droms, R., "Stateless Dynamic Host Configuration Protocol (DHCP)
        Service for IPv6", RFC 3736, April 2004.


   [6]  Lemon, T., "Node-Specific Client Identifiers for DHCPv4",
        draft-ietf-dhc-3315id-for-v4-02 (work in progress), February




Chown, et al.           Expires January 17, 2005               [Page 10]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



        2004.



Authors' Addresses


   Tim Chown
   University of Southampton
   School of Electronics and Computer Science
   Southampton, Hampshire  SO17 1BJ
   United Kingdom


   EMail: tjc@ecs.soton.ac.uk



   Stig Venaas
   UNINETT
   Trondheim  NO 7465
   Norway


   EMail: venaas@uninett.no



   Christian Strauf
   Technical University of Clausthal
   Erzstr. 51
   Clausthal-Zellerfeld  D-38678
   Germany


   EMail: strauf@rz.tu-clausthal.de























Chown, et al.           Expires January 17, 2005               [Page 11]

Internet-Draft          DHCP: Dual-Stack Issues                July 2004



Intellectual Property Statement


   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.


   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.


   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.



Disclaimer of Validity


   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.



Copyright Statement


   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.



Acknowledgment


   Funding for the RFC Editor function is currently provided by the
   Internet Society.





Chown, et al.           Expires January 17, 2005               [Page 12]


Html markup produced by rfcmarkup 1.109, available from https://tools.ietf.org/tools/rfcmarkup/