[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 RFC 6858

Network Working Group                                   Arnt Gulbrandsen
Internet-Draft                                                March 2012
Intended Status: Proposed Standard
Updates: 3501


                  EAI: Simplified POP/IMAP downgrading
                 draft-ietf-eai-simpledowngrade-03.txt


Status of this Memo

   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors. All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document. Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-
   Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft expires in September 2012.







Gulbrandsen              Expires September 2012                 [Page 1]

Internet-draft                                                March 2012


Abstract

   This document specifies a method for IMAP and POP servers to serve
   internationalized messages to conventional clients. The specification
   is simple, easy to implement and provides only rudimentary results.


1. Overview

   It may happen that a conventional IMAP or POP client opens a mailbox
   containing internationalized messages, or even attempt to read
   internationalized messages, for instance when a user has both
   internationalized and conventional MUAs.

   While the server can hide the existence of such messages entirely,
   doing that can be both tricky to implement and not very friendly to
   the user.

   This document specifies a way to present such messages to the client.
   It values simplicity of implementation over fidelity of
   representation, on the theory that anyone who wants accuracy should
   use an internationalized client, and that client implementers' time
   should be reserved for implementing [RFC6531], [RFC5738] and/or
   [RFC5721].

   The server is assumed to be internationalized internally. When it
   needs to present an internationalized message to a conventional
   client, it synthesizes a conventional message containing most of the
   information and presents that (the "synthetic message").


2. Information preserved and lost

   The synthetic message is intended to convey the most important
   information to the user. Where information is lost, the user should
   see the message as incomplete rather than modified.

   The synthetic message is not intended to convey any information to
   the MUA. Nothing parsable is added, not even a marker to say "this
   message has been downgraded".

   Upper case in examples represents non-ASCII. example.com is a plain
   domain, EXAMPLE.com represents a non-ASCII .com domain.








Gulbrandsen              Expires September 2012                 [Page 2]

Internet-draft                                                March 2012


2.1 Email addresses

   Each internationalized email address in the header fields listed
   below is replaced with an invalid email address whose display-name
   tells the user what happened.

   The format of the display-name is explicitly unspecified. Anything
   which tells the user what happened is good. Anything which produces
   an email address which might belong to someone else is bad.

   Given an internationalized address "Fred Foo <fred@EXAMPLE.com>", an
   implementation may choose to render it e.g. as these examples:

      "fred@EXAMPLE.com" <invalid@internationalized-address.invalid>
      Fred Foo <invalid@internationalized.invalid>
      internationalized-address:;
      fred:;

   (The .invalid top-level domain is reserved by [RFC2606], therefore
   the first two examples are syntactically valid, but will never belong
   to anyone. Note that the display-name often will need [RFC2047]
   encoding.)

   The affected header fields are Bcc, Cc, From, Reply-To, Resent-Bcc,
   Resent-Cc, Resent-From, Resent-Sender, Resent-To, Return-Path, Sender
   and To.  Any addresses present in other header fields are not
   regarded as addresses by this specification.


2.2 MIME parameters

   Any MIME parameter [RFC2045] (whether in the message header or a
   bodypart header) which cannot be presented as-is to the client is
   silently excised.

   Given a field such as

      Content-Disposition: attachment; filename=FOO

   the field is presented as

      Content-Disposition: attachment


2.3 "Subject"

   If the Subject field cannot be presented as-is, the server presents a
   representation encoded as specified in [RFC2047].



Gulbrandsen              Expires September 2012                 [Page 3]

Internet-draft                                                March 2012


2.4 Remaining header fields

   Any header field which cannot be presented to the client even after
   the modifications in sections 2.1-2.3 is silently excised.


3. IMAP-specific details

   IMAP allows clients to retrieve the message size without downloading
   it, using RFC822.SIZE, BODY.SIZE[] and so on. [RFC3501] requires that
   the returned size be exact.

   This specification relaxes that requirement: When a conventional
   client requests size information for a message, the IMAP server is
   permitted to return size information for the internationalized
   message, even though the synthetic message's size differs.

   When an IMAP server carries out downgrading as part of generating
   FETCH responses, it reports which messages were synthesised using a
   response code and attendant UID set. This can be helpful to humans
   debugging the server and/or client.

        C: a UID FETCH 1:* BODY.PEEK[HEADER.FIELDS(...)]
        S: 42 FETCH (UID 65 [...]
        S: a OK [DOWNGRADED 70,105,108,109] Done

   The message-set argument to DOWNGRADED contains UIDs.

   Note that DOWNGRADED may not necessarily mention all the
   internationalized messages in the mailbox. If the server doesn't need
   to downgrade anything in order to generate the FETCH response for a
   particular message, it also doesn't need to report that message in
   the OK [DOWNGRADED ...] response.


4. POP-specific details

   The number of lines specified in the TOP command (see [RFC1939])
   refers to the synthetic message. The message size reported by e.g.
   LIST may refer to either the internationalized or the synthetic
   message.


5. Security Considerations

   If the internationalized message contains signed body parts, the
   synthetic message may contain an invalid signature.




Gulbrandsen              Expires September 2012                 [Page 4]

Internet-draft                                                March 2012


   If any excised information is significant, then that information does
   not arrive at the recipient. Notably, the message-id, in-reference-to
   and/or references fields may be excised, which might cause a lack of
   context when the recipient reads the message.


6. Acknowledgements

   Kazunori Fujiwara, Barry Leiba, John Levine, Alexey Melnikov, Chris
   Newman and Joseph Yee helped with this document. I think someone else
   did too, but cannot find the relevant mail. Speak up or be forgotten.


7. IANA Considerations

   The IANA is requested to add DOWNGRADED to the IMAP response code
   registry.

   (RFC editor: Please remove this paragraph. I can't remember the URL
   of the registry, but it's the one specified in RFC 5530.)


8. Normative References

   [RFC1939]  Myers, J and M. Rose, "Post Office Protocol - Version 3",
              RFC 1939, Carnegie Mellon, May 1996.

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2047]  Moore, "MIME (Multipurpose Internet Mail Extensions) Part
              Three: Message Header Extensions for Non-ASCII Text", RFC
              2047, University of Tennessee, November 1996.

   [RFC2606]  Eastlake, D. and A. Panitz, "Reserved Top Level DNS
              Names", BCP 32, RFC 2606, June 1999.

   [RFC3501]  Crispin, "Internet Message Access Protocol - Version
              4rev1", RFC 3501, University of Washington, June 2003.


9. Informative References

   [RFC5721]  Gellens, R.. and C. Newman, "POP3 Support for UTF-8", RFC
              5721, Qualcomm Incorporated, February 2010.

   [RFC5738]  Resnick, P. and C. Newman, "IMAP Support for UTF-8", RFC



Gulbrandsen              Expires September 2012                 [Page 5]

Internet-draft                                                March 2012


              5738, Qualcomm Incorporated, March 2010.

   [RFC6531]  Yao, J. and W. Mao, "SMTP Extension for Internationalized
              Email", RFC 6531, CNNIC, February 2012.


10. Author's Address

   Arnt Gulbrandsen
   Schweppermannstr. 8
   D-81671 Muenchen
   Germany

   Fax: +49 89 4502 9758

   Email: arnt@gulbrandsen.priv.no



































Gulbrandsen              Expires September 2012                 [Page 6]

Internet-draft                                                March 2012


          (RFC Editor: Please delete everything after this point)


Open Issues

   Whether to modify Subject to tell the end user. Alexey is in favour,
   Barry and myself against.

   The name of DOWNGRADED. SYNTHESIZED?

   Should Kazunori Fujiwara's downgrade document also mention
   DOWNGRADED?


Changes since -00

   Added a rule to handle Subject

   Removed the sentence about unknown:;

   Terminology fixes


Changes since -01

   Nits from Joseph Yee.

   Clarified the address rendering and added non-.invalid examples,
   based on suggestions from Kazunori Fujiwara.

   Many changes from Barry Leiba: Simplified and better terminology,
   reformatted examples, more references, etc.

   Specified POP TOP. A bit of a no-op specification.

   Mention BODY.SIZE[] as well as RFC822.SIZE. Wave hands so
   BODY.SIZE[1] sneaks past.

   http://rant.gulbrandsen.priv.no/good-bad-rfc fwiw



Changes since -02

   Added the DOWNGRADED response code, since both Barry and Alexey wants
   it.





Gulbrandsen              Expires September 2012                 [Page 7]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/