[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 RFC 4837

EPON MIB WG                                                  L. Khermosh
Internet-Draft                                      Passave Technologies
Expires: March 21, 2005                               September 20, 2004


                        Managed Objects of EPON
                 draft-ietf-hubmib-efm-epon-mib-02.txt

Status of this Memo

   This document is an Internet-Draft and is subject to all provisions
   of section 3 of RFC 3667.  By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she become aware will be disclosed, in accordance with
   RFC 3668.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on March 21, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2004).

Abstract

   This document defines a portion of the Management Information Base
   (MIB) for use with network management protocols in TCP/IP based
   Internets.  In particular, it defines objects for managing devices
   and interfaces that conform to the Ethernet Passive Optical Networks
   (EPON) standards as defined in IEEE Draft 802.3ah-2004 Draft 3.3.
   The document contains a list of management entities based on the
   registers defined in the Institute of Electrical and Electronic
   Engineers, IEEE Draft 802.3ah-2004 Draft 3.3 Annex 30A and mainly



Khermosh                 Expires March 21, 2005                 [Page 1]

Internet-Draft          Managed Objects of EPON           September 2004


   partitioned accordingly.

Table of Contents

   1.  Terminology  . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  4
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  Relationship of the EFM EPON MIB and EPON device MIB to
       other MIBs . . . . . . . . . . . . . . . . . . . . . . . . . .  6
     4.1   Relationship of the EFM EPON MIB to the Interfaces
           MIB, the Ethernet-like Interfaces MIB and the MAU MIB
           EFM EPON interfaces  . . . . . . . . . . . . . . . . . . .  6
     4.2   Relationship of the EFM EPON MIB to the OAM EFM MIB  . . .  6
     4.3   Relationship of the EPON Device MIB to EFM EPON MIB  . . .  6
     4.4   Relationship of the EPON Device MIB to Optical
           interface MIB  . . . . . . . . . . . . . . . . . . . . . .  6
     4.5   Relationship of the EPON Device MIB to bridge MIB  . . . .  6
     4.6   Relationship of the EPON Device MIB to the Entity MIB  . .  6
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  7
   6.  MIB structure  . . . . . . . . . . . . . . . . . . . . . . . .  8
   7.  Relationship table of the dot3EFM MIB module objects to
       the IEEE802.3ah objects  . . . . . . . . . . . . . . . . . . .  9
   8.  Definitions - The EFM EPON MIB module  . . . . . . . . . . . . 13
   9.  Definitions - The EPON Device MIB  . . . . . . . . . . . . . . 40
   10.   Security Considerations  . . . . . . . . . . . . . . . . . . 72
   11.   References . . . . . . . . . . . . . . . . . . . . . . . . . 75
   11.1  Normative References . . . . . . . . . . . . . . . . . . . . 75
   11.2  Informative References . . . . . . . . . . . . . . . . . . . 76
       Author's Address . . . . . . . . . . . . . . . . . . . . . . . 76
       Intellectual Property and Copyright Statements . . . . . . . . 77





















Khermosh                 Expires March 21, 2005                 [Page 2]

Internet-Draft          Managed Objects of EPON           September 2004


1.  Terminology

   Key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].














































Khermosh                 Expires March 21, 2005                 [Page 3]

Internet-Draft          Managed Objects of EPON           September 2004


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].  Managed objects are accessed via a virtual
   information store, termed the Management Information Base or MIB.
   MIB objects are generally accessed through the Simple Network
   Management Protocol (SNMP).  Objects in the MIB are defined using the
   mechanisms defined in the Structure of Management Information (SMI).
   This memo specifies a MIB module that is compliant to the SMIv2,
   which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579
   [RFC2579] and STD 58, RFC 2580 [RFC2580].







































Khermosh                 Expires March 21, 2005                 [Page 4]

Internet-Draft          Managed Objects of EPON           September 2004


3.  Overview

   This document defines a portion of the Management Information Base
   (MIB) for use with network management protocols in TCP/IP based
   Internets.  In particular, it defines objects for managing devices
   and interfaces that conform to the Ethernet Passive Optical Networks
   (EPON) standards as defined in [802.3ah].  The document contains a
   list of management entities based on the registers defined in
   [802.3ah] Annex 30A and partitioned accordingly.  The document also
   contains a device group section defining the MIB modules for EPON
   from a device perspective, that are connected directly to the IEEE
   802.3ah specifications.  The document also provides amendments to the
   802.3 MAU MIB modules documents for the EFM EPON device type
   addition.





































Khermosh                 Expires March 21, 2005                 [Page 5]

Internet-Draft          Managed Objects of EPON           September 2004


4.  Relationship of the EFM EPON MIB and EPON device MIB to other MIBs

4.1  Relationship of the EFM EPON MIB to the Interfaces MIB, the
    Ethernet-like Interfaces MIB and the MAU MIB EFM EPON interfaces

   require implementation of Interfaces MIB module [RFC2863],
   Ethernet-like Interfaces MIB module [RFC3635] and MAU-MIB module
   [RFC3636].  The MIB modules defined in this document are an extension
   for these MIB modules.  For instance, The module is defining
   dot3MpcpRemoteMACAddress only while assuming the local MAC address
   attribute is already defined in [RFC3635].

4.2  Relationship of the EFM EPON MIB to the OAM EFM MIB

   EFM EPON interfaces require implementation of OAM EFM MIB module
   [I-D.ietf-hubmib-efm-mib].  This document defines OAM MIB module
   attributes and managed objects that are complementary to the EFM EPON
   MIB module.

4.3  Relationship of the EPON Device MIB to EFM EPON MIB

   EPON devices require implementation of the EFM EPON MIB module which
   are specified in this document.  The opposite is not required as it
   possible to implement the EFM interfaces by itself.

4.4  Relationship of the EPON Device MIB to Optical interface MIB

   EPON devices may implement the Optical interface MIB module
   [RFC3591].  The optical interface MIB module document defines optical
   interface attributes and managed objects that are assumed to be used
   by an EPON device.

4.5  Relationship of the EPON Device MIB to bridge MIB

   EPON OLT devices may implement the bridge MIB modules [RFC1493],
   [RFC1525], Where the LLIDs of the PON are referred as the bridge
   ports.  There is a direct mapping between the bridge ports and the
   LLIDs, which are virtual bridge ports.  Attributes in the bridge MIB
   module should be used accordingly.  This document defines managed
   objects for a bridge that are assumed to be used by an EPON OLT
   device which bridges the data between the LLIDs of the PON.

4.6  Relationship of the EPON Device MIB to the Entity MIB

   EPON OLT devices may implement the Entity MIB modules [RFC2737],
   Where attributes like physical device ID and physical status,
   Hardware status are used from that MIB module




Khermosh                 Expires March 21, 2005                 [Page 6]

Internet-Draft          Managed Objects of EPON           September 2004


5.  IANA Considerations

   The EFM EPON MIB module requires the allocation of a single object
   identifier for its MODULE-IDENTITY under the MIB-2 tree.  The EPON
   Device MIB module requires the allocation of a single object
   identifier for its MODULE-IDENTITY under the MIB-2 tree.  IANA has
   not yet allocated these object identifiers.












































Khermosh                 Expires March 21, 2005                 [Page 7]

Internet-Draft          Managed Objects of EPON           September 2004


6.  MIB structure

   This document includes two MIB modules, the first is the EFM EPON MIB
   module and the second is the EPON device MIB module.  The EFM EPON
   MIB module defines the objects used for configuration and description
   of the [802.3ah] P2MP section.  These MIB module objects are included
   in three MIB module groups.

   The MPCP MIB module definition - MIB module related to [802.3ah]
   clause 64 Multi Point Control Protocol attributes.  In this MIB
   module group: The dot3MpcpTable defines the objects used for the
   configuration and description of the status of MPCP ([802.3ah]
   Multi-Point Control Protocol) compliant interfaces.  The
   dot3MpcpStatTable defines the statistics group for MPCP compliant
   interfaces.

   The OMPEmulation MIB module definitions - MIB module related to
   [802.3ah] clause 65 point to point emulation attributes.  In this MIB
   module group: The dot3OmpEmulationTable defines the objects used for
   the configuration and description of the status of OMPEmulation
   compliant interfaces.  The dot3OmpEmulationStatTable defines the
   statistics group for OMPEmulation compliant interfaces.

   The MAU MIB module definition including MAU type definitions and EPON
   MAU managed object related to [802.3ah] clause 60 and clause 65.  The
   dot3EponMauTable defines the objects used for the configuration and
   description of the status of MAU EPON compliant interfaces.  The
   dot3EponMauType defines the Type group for [802.3ah] EPOM MAUs.
   Editor note - Editor recommands the MAU Type object should be in
   [802.3] MAU type objects [RFC3636].


   The EPON Device MIB module defines the objects used for configuration
   and description of management objects for EPON compliant Devices.
   The eponDeviceControlTable defines the objects used for the
   configuration and description of the EPON compliant devices.  The
   eponDeviceRemoteMACAddressLLIDTable defines the objects used for
   configuration and description of the MacAddress to LLID table used
   for the bridge emulation of the EPON devices.  The
   eponDeviceStatTable defines the objects used for the statistics group
   of the EPON devices.  The eponDeviceEventObjectTable defines the
   objects used for configuration and desription of specific Events of
   the EPON devices.  The eponDeviceEventsLogTable defines the objects
   used for the events log of the EPON devices.







Khermosh                 Expires March 21, 2005                 [Page 8]

Internet-Draft          Managed Objects of EPON           September 2004


7.   Relationship table of the dot3EFM MIB module objects to the
   IEEE802.3ah objects

   oMPCP managed object class (30.3.5)

   +----------------------+----------------------+---------------------+
   | dot3EFM MIB module   | IEEE802.3ah object   | Reference           |
   | object               |                      |                     |
   +----------------------+----------------------+---------------------+
   | dot3MpcpID           | aMPCPID              | 30.3.5.1.1          |
   |                      |                      |                     |
   | dot3MpcpAdminState   | aMPCPAdminState      | 30.3.5.1.2          |
   |                      |                      |                     |
   | dot3MpcpMode         | aMPCPMode            | 30.3.5.1.3          |
   |                      |                      |                     |
   | dot3MpcpLinkID       | aMPCPLinkID          | 30.3.5.1.4          |
   |                      |                      |                     |
   | dot3MpcpRemoteMACAdd | aMPCPRemoteMACAddres | 30.3.5.1.5          |
   | ess                  |                      |                     |
   |                      |                      |                     |
   | dot3MpcpRegistration | aMPCPRegistrationSta | 30.3.5.1.6          |
   | tate                 | e                    |                     |
   |                      |                      |                     |
   | dot3MpcpMACCtrlFrame | aMPCPMACCtrlFramesTr | 30.3.5.1.7          |
   | Transmitted          | nsmitted             |                     |
   |                      |                      |                     |
   | dot3MpcpMACCtrlFrame | aMPCPMACCtrlFramesRe | 30.3.5.1.8          |
   | Received             | eived                |                     |
   |                      |                      |                     |
   | dot3MpcpTxGate       | aMPCPTxGate          | 30.3.5.1.9          |
   |                      |                      |                     |
   | dot3MpcpTxRegAck     | aMPCPTxRegAck        | 30.3.5.1.10         |
   |                      |                      |                     |
   | dot3MpcpTxRegister   | aMPCPTxRegister      | 30.3.5.1.11         |
   |                      |                      |                     |
   | dot3MpcpTxRegRequest | aMPCPTxRegRequest    | 30.3.5.1.12         |
   |                      |                      |                     |
   | dot3MpcpTxReport     | aMPCPTxReport        | 30.3.5.1.13         |
   |                      |                      |                     |
   | dot3MpcpRxGate       | aMPCPRxGate          | 30.3.5.1.14         |
   |                      |                      |                     |
   | dot3MpcpRxRegAck     | aMPCPRxRegAck        | 30.3.5.1.15         |
   |                      |                      |                     |
   | dot3MpcpRxRegister   | aMPCPRxRegister      | 30.3.5.1.16         |
   |                      |                      |                     |
   | dot3MpcpRxRegRequest | aMPCPRxRegRequest    | 30.3.5.1.17         |
   |                      |                      |                     |
   | dot3MpcpRxReport     | aMPCPRxReport        | 30.3.5.1.18         |



Khermosh                 Expires March 21, 2005                 [Page 9]

Internet-Draft          Managed Objects of EPON           September 2004


   |                      |                      |                     |
   | dot3MpcpTransmitElap | aMPCPTransmitElapsed | 30.3.5.1.19         |
   | ed                   |                      |                     |
   |                      |                      |                     |
   | dot3MpcpReceiveElaps | aMPCPReceiveElapsed  | 30.3.5.1.20         |
   | d                    |                      |                     |
   |                      |                      |                     |
   | dot3MpcpRoundTripTim | aMPCPRoundTripTime   | 30.3.5.1.21         |
   |                      |                      |                     |
   |                      |                      |                     |
   | dot3MpcpDiscoveryWin | aMPCPDiscoveryWindow | 30.3.5.1.22         |
   | owsSent              | Sent                 |                     |
   |                      |                      |                     |
   | dot3MpcpDiscoveryTim | aMPCPDiscoveryTimeou | 30.3.5.1.23         |
   | out                  |                      |                     |
   |                      |                      |                     |
   | dot3MpcpMaximumPendi | aMPCPMaximumPendingG | 30.3.5.1.24         |
   | gGrants              | ants                 |                     |
   |                      |                      |                     |
   | dot3MPCPAdminControl | acMPCPAdminControl   | 30.3.5.2.1          |
   |                      |                      |                     |
   | dot3MpcpOnTime       | laserOnTime          | 64.3.5.1            |
   |                      |                      |                     |
   | dot3MpcpOffTime      | laserOffTime         | 64.3.5.1            |
   |                      |                      |                     |
   | dot3MpcpSyncTime     | SyncTime             | 64.3.3.2            |
   |                      |                      |                     |
   | dot3MpcpRxNotSupport |                      |                     |
   | dMPCP                |                      |                     |
   +----------------------+----------------------+---------------------+

                                Table 1



















Khermosh                 Expires March 21, 2005                [Page 10]

Internet-Draft          Managed Objects of EPON           September 2004


   oOMPEmulation managed object class (30.3.7)

   +----------------------+----------------------+---------------------+
   | dot3EFM MIB module   | IEEE802.3ah object   | Reference           |
   | object               |                      |                     |
   +----------------------+----------------------+---------------------+
   | dot3OmpEmulationID   | aOMPEmulationID      | 30.3.7.1.1          |
   |                      |                      |                     |
   | dot3OmpEmulationType | aOMPEmulationType    | 30.3.7.1.2          |
   |                      |                      |                     |
   | dot3OmpEmulationSLDE | aSLDErrors           | 30.3.7.1.3          |
   | rors                 |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationCRC8 | aCRC8Errors          | 30.3.7.1.4          |
   | rrors                |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationGood | aGoodLLID            | 30.3.7.1.5          |
   | LID                  |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationOnuP | aONUPONcastLLID      | 30.3.7.1.6          |
   | nCastLLID            |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationOltP | aOLTPONcastLLID      | 30.3.7.1.7          |
   | nCastLLID            |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationBadL | aBadLLID             | 30.3.7.1.8          |
   | ID                   |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationBroa |                      |                     |
   | castLLIDNotOnuID     |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationOnuL |                      |                     |
   | IDNotBroadcast       |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationBroa |                      |                     |
   | castLLIDPlusOnuId    |                      |                     |
   |                      |                      |                     |
   | dot3OmpEmulationNotB |                      |                     |
   | oadcastLLIDNotOnuId  |                      |                     |
   +----------------------+----------------------+---------------------+

                                Table 2









Khermosh                 Expires March 21, 2005                [Page 11]

Internet-Draft          Managed Objects of EPON           September 2004


   oMAU managed object class (30.5.1)

   +----------------------+----------------------+---------------------+
   | dot3EFM MIB module   | IEEE802.3ah object   | Reference           |
   | object               |                      |                     |
   +----------------------+----------------------+---------------------+
   | dot3EponMauType      | aMAUType             | 30.5.1.1.2          |
   |                      |                      |                     |
   | dot3EponMauPCSCoding | aPCSCodingViolation  | 30.5.1.1.12         |
   | iolation             |                      |                     |
   |                      |                      |                     |
   | dot3EponMauFecAbilit | aFECAbility          | 30.5.1.1.13         |
   |                      |                      |                     |
   |                      |                      |                     |
   | dot3EponMauFecMode   | aFECmode             | 30.5.1.1.14         |
   |                      |                      |                     |
   | dot3EponMauFECCorrec | aFECCorrectedBlocks  | 30.5.1.1.15         |
   | edBlocks             |                      |                     |
   |                      |                      |                     |
   | dot3EponMauFECUncorr | aFECUncorrectableBlo | 30.5.1.1.16         |
   | ctableBlocks         | ks                   |                     |
   |                      |                      |                     |
   | dot3EponMauBufferHea |                      |                     |
   | CodingViolation      |                      |                     |
   +----------------------+----------------------+---------------------+

                                Table 3
























Khermosh                 Expires March 21, 2005                [Page 12]

Internet-Draft          Managed Objects of EPON           September 2004


8.   Definitions - The EFM EPON MIB module

   (See section 30.2.5 in [802.3ah] for details)




   DOT3-EFM-EPON-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
            Integer32, OBJECT-IDENTITY
                FROM SNMPv2-SMI
            TruthValue, MacAddress
                FROM SNMPv2-TC
            ifIndex
                FROM IF-MIB
            MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF
            ;

   dot3EfmeponMIB MODULE-IDENTITY
       LAST-UPDATED "200409210000Z"  -- September 21, 2004
       ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working
                    Group"
       CONTACT-INFO
                    "WG charter:
                 http://www.ietf.org/html.charters/hubmib-charter.html
                     Mailing Lists:
                       General Discussion: hubmib@ietf.org
                       To Subscribe: hubmib-request@ietf.org
                       In Body: subscribe your_email_address
                       Chair: Dan Romascanu
                       Postal: Avaya Inc.
                               Atidim Technology Park, Bldg. 3
                               Tel Aviv 61131
                               Israel
                        Tel: +972-3-645-8414
                        E-mail: dromasca@avaya.com

                     Editor: Lior Khermosh
                        Postal: Passave Technologies Inc.
                               Ackerstein Towers, Tower A, 6th floor,
                               9 Hamenofim St.
                               Hertzliya Pituach 46725,
                               ISRAEL
                        P.O.Box 2089 Hertzliya Pituach 46120 Israel
                        Tel:    +972-9-9717600 Ext: 7181



Khermosh                 Expires March 21, 2005                [Page 13]

Internet-Draft          Managed Objects of EPON           September 2004


                        E-mail: lior.khermosh@passave.com"
       DESCRIPTION
               "The objects in this MIB module are used to manage the
                Ethernet in the First Mile (EFM) Multi Point Control
                Protocol (MPCP) Interfaces as defined in IEEE Draft
                P802.3ah/D3.0 clause 64,65.
            The following reference is used throughout this MIB module:
              [802.3ah] refers to:
                IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
                Information technology - Telecommunications and
                information exchange between systems - Local and
                metropolitan area networks - Specific requirements -
                Part 3: Carrier sense multiple access with collision
                detection (CSMA/CD) access method and physical layer
                specifications - Media Access Control Parameters,
                Physical Layers and Management Parameters for
                subscriber access networks', 22 April 2004.

             Of particular interest are Clause 64(MPCP) 65(P2MP RS) and
             60 (PON PMDs). Clause 30, 'Management', and Clause 45,
             'Management Data Input/Output (MDIO) Interface'.

             Copyright (C) The Internet Society (2004).  This version
             of this MIB module is part of XXXX see the RFC itself for
             full legal notices."

             -- Editor's Note: Replace XXXX with the actual RFC number
             -- assigned by RFC Editor and remove this note

       REVISION    "200409210000Z"  -- September 21, 2004
       DESCRIPTION "Initial version, published as RFC XXXX."

       ::= { mib-2 XXX }

       -- Editor's Note: Replace XXX with a real OID once it is
       -- assigned by IANA and remove this note.


   -- Editor-s note: MPCP MIB modules definitions ([802.3ah]
   --- clause 30.3.5)
   -- Editor-s note: Description in attributes with References should be
   -- minimized in later versions

   dot3MpcpMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 1}

   dot3MpcpObjects OBJECT IDENTIFIER ::= { dot3MpcpMIB 1}

   dot3MpcpConformance OBJECT IDENTIFIER ::= { dot3MpcpMIB 2}



Khermosh                 Expires March 21, 2005                [Page 14]

Internet-Draft          Managed Objects of EPON           September 2004


   dot3MpcpTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF Dot3MpcpEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "Table for dot3 Multi-Point Control Protocol (MPCP)
               MIB modules."
       ::= { dot3MpcpObjects 1 }

   dot3MpcpEntry OBJECT-TYPE
       SYNTAX  Dot3MpcpEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "An entry in the dot3 MPCP MIB modules table."
       INDEX  { ifIndex }
       ::= { dot3MpcpTable 1 }

   Dot3MpcpEntry ::=
       SEQUENCE {
           dot3MpcpID                           Integer32,
           dot3MpcpOperStatus                   TruthValue,
           dot3MpcpMode                         INTEGER,
           dot3MpcpLinkID                       Integer32,
           dot3MpcpRemoteMACAddress             MacAddress,
           dot3MpcpRegistrationState            INTEGER,
           dot3MpcpTransmitElapsed              Integer32,
           dot3MpcpReceiveElapsed               Integer32,
           dot3MpcpRoundTripTime                Integer32,
           dot3MpcpMaximumPendingGrants         Integer32,
           dot3MpcpAdminState                   TruthValue,
           dot3MpcpOnTime                       Integer32,
           dot3MpcpOffTime                      Integer32,
           dot3MpcpSyncTime                     Integer32
       }

   dot3MpcpID OBJECT-TYPE
       SYNTAX  Integer32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "This variable is assigned so as to uniquely identify the
                Multi-Point MAC  Control (MPCP) entity, as defined in
                [802.3ah] clause 64, among the subordinate managed
                objects of the containing object.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.1."
       ::= { dot3MpcpEntry 1 }



Khermosh                 Expires March 21, 2005                [Page 15]

Internet-Draft          Managed Objects of EPON           September 2004


   dot3MpcpOperStatus OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "This variable can be used to define the operational
                state of the Multi-Point MAC Control sublayer as
                defined in [802.3ah] clause 64. Selecting admin for an
                interface with Multi-Point MAC Control sublayer. When
                the attribute is True the the interface will act as if
                Multi-point control protocol is enabled. When the
                attribute is False the interface will act as if it does
                not have the Multi-point control protocol. The
                operational state can be changed using the
                dot3MpcpAdminState attribute.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.2."
       ::= { dot3MpcpEntry 2 }

   dot3MpcpMode  OBJECT-TYPE
       SYNTAX  INTEGER {
               olt(1),
               onu(2)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "This variable can be used to identify the operational
                state of the Multi-Point MAC Control sublayer as
                defined in [802.3ah] clause 64. Selecting olt(1) for an
                OLT (server) mode and onu(2) for an ONU (client) mode.
                Writing can be done during only during initialization,
                when dot3MpcpOperStatus indicates Flase.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.3."
       DEFVAL { 1 }
       ::= { dot3MpcpEntry 3 }

   dot3MpcpLinkID OBJECT-TYPE
       SYNTAX  Integer32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that identifies the Logical Link
                identity (LLID) associated with the MAC port as
                specified in [802.3ah] clause 65.1.3.2.2.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.4."



Khermosh                 Expires March 21, 2005                [Page 16]

Internet-Draft          Managed Objects of EPON           September 2004


       ::= { dot3MpcpEntry 4 }

   dot3MpcpRemoteMACAddress OBJECT-TYPE
       SYNTAX  MacAddress
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that identifies the source_address
                parameter of the last MPCPDUs passed to the MAC Control.
                This value is updated on reception of a valid frame with
                (1) a destination Field equal to the reserved multicast
                address for MAC Control specified in [802.3ah] Annex
                31A, (2) lengthOrType field value equal to the reserved
                Type for MAC Control as specified in [802.3ah] Annex
                31A. (3) an MPCP subtype value equal to the subtype
                reserved for MPCP as specified in [802.3ah] Annex 31A.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.5."
       ::= { dot3MpcpEntry 5 }

   dot3MpcpRegistrationState OBJECT-TYPE
       SYNTAX  INTEGER {
               unregistered(1),
               registering(2),
               registered(3)
       }
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that identifies the operational state
                of the Multi-Point MAC Control sublayer as defined in
                [802.3ah] clause 64. When this attribute has the
                enumeration unregistered(1) the interface may be used
                for registering a link partner. When this attribute has
                the enumeration registering(2) the interface is in the
                process of registering a link-partner. When this
                attribute has the enumeration registered(3) the
                interface has an established link-partner.
                This attribute is relevant for an OLT and an ONU. For
                the OLT it provides an indication per LLID."
       REFERENCE   "[802.3ah], 30.3.5.1.6."
       ::= { dot3MpcpEntry 6 }

   dot3MpcpTransmitElapsed OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current



Khermosh                 Expires March 21, 2005                [Page 17]

Internet-Draft          Managed Objects of EPON           September 2004


       DESCRIPTION
               "A read-only value that reports the interval from last
                MPCP frame transmission in increments of Time Quanta
                (TQ) 16ns. The value returned shall be (interval from
                last MPCP frame transmission in ns)/16. If this value
                exceeds (2^32-1) the value (2^32-1) shall be returned.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.19."
       ::= { dot3MpcpEntry 7 }

   dot3MpcpReceiveElapsed OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that reports the interval from last
                MPCP frame reception in increments of Time Quanta (TQ)
                16ns. The value returned shall be (interval from last
                MPCP last MPCP frame reception in ns)/16. If this value
                exceeds (2^32-1) the value (2^32-1) shall be returned.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.20."
       ::= { dot3MpcpEntry 8 }

   dot3MpcpRoundTripTime OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that reports the MPCP round trip time
                in increments of Time Quanta (TQ) 16ns. The value
                returned shall be (round trip time in ns)/16. If this
                value exceeds (2^16-1) the value (2^16-1)  shall be
                returned. This attribute is relevant for an OLT and an
                ONU. For the OLT there is a value per LLID"
       REFERENCE   "[802.3ah], 30.3.5.1.21."
       ::= { dot3MpcpEntry 9 }

   dot3MpcpMaximumPendingGrants OBJECT-TYPE
       SYNTAX  Integer32 (0..255)
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that indicates the maximum number of
                grants an ONU can store. The maximum number of grants an
                ONU can store has a range of 0 to 255.



Khermosh                 Expires March 21, 2005                [Page 18]

Internet-Draft          Managed Objects of EPON           September 2004


                This attribute is relevant for an OLT and an ONU. For
                the OLT there is a value per LLID"
       REFERENCE   "[802.3ah], 30.3.5.1.24."
       ::= { dot3MpcpEntry 10 }

   dot3MpcpAdminState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "This variable can be used to define the operational
                state of the Multi-Point MAC Control sublayer as defined
                in [802.3ah] clause 64. Selecting admin for an interface
                with Multi-Point MAC Control sublayer. When selecting
                the value as True the interface Multi-Point control
                protocol is enabled. When selecting the value as False
                the interface acts as if the Multi-point Control
                protocol does not exist. Reading reflects the state of
                the attribute and the operation of the Multi-point
                control protocol mode of the interface.
                Writing can be done all the time.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.2.1."
       DEFVAL { false }
       ::= { dot3MpcpEntry 11 }


   dot3MpcpOnTime OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that reports the -on time- for a grant
                burst in increments of Time Quanta (TQ) 16ns as defined
                in [802.3ah] 60,64. The value returned shall be (on time
                ns)/16. If this value exceeds (2^32-1) the value
                (2^32-1) shall be returned.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 64.3.5.1."
       ::= { dot3MpcpEntry 12 }

   dot3MpcpOffTime OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION



Khermosh                 Expires March 21, 2005                [Page 19]

Internet-Draft          Managed Objects of EPON           September 2004


               "A read-only value that reports the -off time- for a
                grant burst in increments of Time Quanta (TQ) 16ns as
                defined in [802.3ah] 60,64. The value returned shall be
                (off time ns)/16. If this value exceeds (2^32-1) the
                value (2^32-1) shall be returned.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 64.3.5.1."
       ::= { dot3MpcpEntry 13 }

   dot3MpcpSyncTime OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that reports the -sync lock time- for
                an OLT receiver in increments of Time Quanta (TQ) 16ns
                as defined in [802.3ah] 60,64,65. The value returned
                shall be (sync lock time ns)/16. If this value exceeds
                (2^32-1) the value (2^32-1) shall be returned.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 64.3.3.2."
      ::= { dot3MpcpEntry 14 }



   dot3MpcpStatTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF Dot3MpcpStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "This table defines the list of statistics counters of
                [802.3ah] clause 64 MPCP interface."
   ::= { dot3MpcpObjects 2 }

   dot3MpcpStatEntry OBJECT-TYPE
       SYNTAX     Dot3MpcpStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "Table entries for table of statistics counters of
                [802.3ah] clause 64 MPCP interface."
       INDEX       { ifIndex }
       ::= { dot3MpcpStatTable 1 }

   Dot3MpcpStatEntry ::=
       SEQUENCE {
               dot3MpcpMACCtrlFramesTransmitted       Counter32,



Khermosh                 Expires March 21, 2005                [Page 20]

Internet-Draft          Managed Objects of EPON           September 2004


               dot3MpcpMACCtrlFramesReceived          Counter32,
               dot3MpcpDiscoveryWindowsSent           Counter32,
               dot3MpcpDiscoveryTimeout               Counter32,
               dot3MpcpTxRegRequest                   Counter32,
               dot3MpcpRxRegRequest                   Counter32,
               dot3MpcpTxRegAck                       Counter32,
               dot3MpcpRxRegAck                       Counter32,
               dot3MpcpTxReport                       Counter32,
               dot3MpcpRxReport                       Counter32,
               dot3MpcpTxGate                         Counter32,
               dot3MpcpRxGate                         Counter32,
               dot3MpcpTxRegister                     Counter32,
               dot3MpcpRxRegister                     Counter32,
               dot3MpcpRxNotSupportedMPCP             Counter32
       }

   dot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of MPCP frames passed to the MAC sublayer for
                transmission. This counter is incremented when a
                MA_CONTROL.request service primitive is generated within
                the MAC control sublayer with an opcode indicating a
                MPCP frame.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.7."
       ::= { dot3MpcpStatEntry 1 }

   dot3MpcpMACCtrlFramesReceived OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of MPCP frames passed by the MAC sublayer to the
                MAC Control sublayer. This counter is incremented when a
                ReceiveFrame function call returns a valid frame with:
                (1) a lengthOrType field value equal to the reserved
                Type for 802.3_MAC_Control as specified in 31.4.1.3, and
                (2) an opcode indicating a MPCP frame.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.8."
       ::= { dot3MpcpStatEntry 2}

   dot3MpcpDiscoveryWindowsSent OBJECT-TYPE



Khermosh                 Expires March 21, 2005                [Page 21]

Internet-Draft          Managed Objects of EPON           September 2004


       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of discovery windows generated. The counter is
                incremented by one for each generated discovery window.
                This attribute is relevant for an OLT and an ONU. At the
                ONU value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.22."
       ::= { dot3MpcpStatEntry 3}

   dot3MpcpDiscoveryTimeout OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a discovery timeout
                occurs. Increment the counter by one for each discovery
                processing state-machine reset resulting from timeout
                waiting for message arrival.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.5.1.23."
       ::= { dot3MpcpStatEntry 4}


   dot3MpcpTxRegRequest OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER_REQ MPCP
                frames transmission occurs. Increment the counter by one
                for each REGISTER_REQ MPCP frame transmitted as defined
                in [802.3ah] clause 64. This counter is mandatory for an
                ONU. This attribute is relevant for an OLT and an ONU.
                At the OLT value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.12."
       ::= { dot3MpcpStatEntry 5}

   dot3MpcpRxRegRequest OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER_REQ MPCP
                frames reception occurs. A single counter at the ONU and



Khermosh                 Expires March 21, 2005                [Page 22]

Internet-Draft          Managed Objects of EPON           September 2004


                a set of counters, one for each LLID, at the OLT.
                Increment the counter by one for each REGISTER_REQ MPCP
                frame received for each LLID as defined in [802.3ah]
                clause 64. This counter is mandatory for an ONU and for
                an OLT. At the ONU value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.17."
       ::= { dot3MpcpStatEntry 6}

   dot3MpcpTxRegAck OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER_ACK MPCP
                frames transmission occurs. Increment the counter by one
                for each REGISTER_ACK MPCP frame transmitted as defined
                in [802.3ah] clause 64. This counter is mandatory for an
                ONU. This attribute is relevant for an OLT and an ONU.
                At the OLT the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.10."
       ::= { dot3MpcpStatEntry 7}

   dot3MpcpRxRegAck OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER_ACK MPCP
                frames reception occurs. A single counter at the ONU and
                a set of counters, one for each LLID, at the OLT.
                Increment the counter by one for each REGISTER_ACK MPCP
                frame received for each LLID, as defined in [802.3ah]
                clause 64. This counter is mandatory for an ONU and for
                an OLT. At the ONU the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.15."
       ::= { dot3MpcpStatEntry 8}

   dot3MpcpTxReport OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REPORT MPCP frames
                transmission occurs. Increment the counter by one for
                each REPORT MPCP frame transmitted as defined in



Khermosh                 Expires March 21, 2005                [Page 23]

Internet-Draft          Managed Objects of EPON           September 2004


                [802.3ah] clause 64. This counter is mandatory for an
                ONU. This attribute is relevant for an OLT and an ONU.
                At the OLT value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.13."
       ::= { dot3MpcpStatEntry 9}

   dot3MpcpRxReport OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REPORT MPCP frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each REPORT MPCP frame received
                for each LLID, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and for an OLT.
                At the ONU value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.18."
       ::= { dot3MpcpStatEntry 10}

   dot3MpcpTxGate OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a GATE MPCP frames
                transmission occurs. A set of counters, one for each
                LLID, at the OLT. Increment the counter by one for each
                GATE MPCP frame transmitted, for each LLID, as defined
                in [802.3ah] clause 64. This counter is mandatory for an
                OLT. This attribute is relevant for an OLT and an ONU.
                At the ONU the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.9."
       ::= { dot3MpcpStatEntry 11}

   dot3MpcpRxGate OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a GATE MPCP frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID ,at the OLT. Increment
                the counter by one for each GATE MPCP frame received,



Khermosh                 Expires March 21, 2005                [Page 24]

Internet-Draft          Managed Objects of EPON           September 2004


                for each LLID, as defined in [802.3ah] clause 64. This
                counter is mandatory for an ONU and for an OLT. At the
                OLT the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.14."
       ::= { dot3MpcpStatEntry 12}

   dot3MpcpTxRegister OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER MPCP frames
                transmission occurs. A set of counters, one for each
                LLID, at the OLT. Increment the counter by one for each
                REGISTER MPCP frame transmitted, for each LLID, as
                defined in [802.3ah] clause 64. This counter is
                mandatory for an OLT. This attribute is relevant for an
                OLT and an ONU. At the ONU the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.11."
       ::= { dot3MpcpStatEntry 13}

   dot3MpcpRxRegister OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a REGISTER MPCP frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each REGISTER MPCP frame
                received, for each LLID, as defined in [802.3ah] clause
                64. This counter is mandatory for an ONU and for an OLT.
                at the OLT the value should be zero."
       REFERENCE   "[802.3ah], 30.3.5.1.16."
       ::= { dot3MpcpStatEntry 14}

   dot3MpcpRxNotSupportedMPCP OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a non-supported MPCP
                frames reception occurs. A single counter at the ONU and
                a set of counters, one for each LLID, at the OLT.
                Increment the counter by one for each non-supported MPCP



Khermosh                 Expires March 21, 2005                [Page 25]

Internet-Draft          Managed Objects of EPON           September 2004


                frame received, for each LLID, as defined in [802.3ah]
                clause 64. This counter is mandatory for an ONU and for
                an OLT."
       ::= { dot3MpcpStatEntry 15}




        -- Conformance Statements

   -- Conformance Groups

   dot3MpcpGroups      OBJECT IDENTIFIER ::= { dot3MpcpConformance 1 }

   dot3MpcpGroupBase OBJECT-GROUP
       OBJECTS {
               dot3MpcpID,
               dot3MpcpOperStatus,
               dot3MpcpMode,
               dot3MpcpLinkID,
               dot3MpcpRemoteMACAddress,
               dot3MpcpRegistrationState,
               dot3MpcpMaximumPendingGrants,
               dot3MpcpAdminState
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 Mpcp Basic entity state
               definition."
       ::= { dot3MpcpGroups 1 }

   dot3MpcpGroupParam OBJECT-GROUP
       OBJECTS {
               dot3MpcpTransmitElapsed,
               dot3MpcpReceiveElapsed,
               dot3MpcpRoundTripTime,
               dot3MpcpOnTime,
               dot3MpcpOffTime,
               dot3MpcpSyncTime
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 Mpcp for P2MP
                parameters."
       ::= { dot3MpcpGroups 2 }

   dot3MpcpGroupStat OBJECT-GROUP
       OBJECTS {



Khermosh                 Expires March 21, 2005                [Page 26]

Internet-Draft          Managed Objects of EPON           September 2004


               dot3MpcpMACCtrlFramesTransmitted,
               dot3MpcpMACCtrlFramesReceived,
               dot3MpcpDiscoveryWindowsSent,
               dot3MpcpDiscoveryTimeout ,
               dot3MpcpTxRegRequest,
               dot3MpcpRxRegRequest,
               dot3MpcpTxRegAck,
               dot3MpcpRxRegAck,
               dot3MpcpTxReport,
               dot3MpcpRxReport,
               dot3MpcpTxGate,
               dot3MpcpRxGate,
               dot3MpcpTxRegister,
               dot3MpcpRxRegister,
               dot3MpcpRxNotSupportedMPCP
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 Mpcp Statistics"
       ::= { dot3MpcpGroups 3 }


   -- Compliance

   dot3MpcpCompliances OBJECT IDENTIFIER ::= { dot3MpcpConformance 2 }

   dot3MPCPCompliance MODULE-COMPLIANCE
       STATUS      current
       DESCRIPTION "The compliance statement for Multi-point
                    control protocol interfaces."

       MODULE  -- this module
       MANDATORY-GROUPS { dot3MpcpGroupBase}

      GROUP       dot3MpcpGroupParam
      DESCRIPTION "This group is mandatory for all MPCP supporting
                   interfaces for configuration of the Multipoint
                   Parameters."
      GROUP       dot3MpcpGroupStat
      DESCRIPTION "This group is mandatory for all MPCP supporting
                   interfaces for Statistics collection."
      ::= { dot3MpcpCompliances 1}





   -- Editor-s note:   OMPEmulation managed object definitions



Khermosh                 Expires March 21, 2005                [Page 27]

Internet-Draft          Managed Objects of EPON           September 2004


   dot3OmpEmulationMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 2}

   dot3OmpEmulationObjects OBJECT IDENTIFIER ::={dot3OmpEmulationMIB 1}

   dot3OmpeConformance OBJECT IDENTIFIER ::= { dot3OmpEmulationMIB 2 }


   dot3OmpEmulationTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF Dot3OmpEmulationEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "Table for dot3 OmpEmulation MIB modules."
       ::= { dot3OmpEmulationObjects 1 }

   dot3OmpEmulationEntry OBJECT-TYPE
       SYNTAX  Dot3OmpEmulationEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "An entry in the dot3 OmpEmulation MIB modules table."
       INDEX  { ifIndex }
       ::= { dot3OmpEmulationTable 1 }

       Dot3OmpEmulationEntry ::=
       SEQUENCE {
               dot3OmpEmulationID            Integer32,
               dot3OmpEmulationType               INTEGER
       }

   dot3OmpEmulationID OBJECT-TYPE
       SYNTAX  Integer32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "The value of dot3OmpEmulationID is assigned so as to
                uniquely identify a OMPEmulation entity among the
                subordinate managed objects of the containing object.
                The value is mandated for an ONU."
       REFERENCE   "[802.3ah], 30.3.7.1.1."
       ::= { dot3OmpEmulationEntry 1}

   dot3OmpEmulationType OBJECT-TYPE
       SYNTAX  INTEGER {
               unknown(1),
               olt(2),
               onu(3)
       }



Khermosh                 Expires March 21, 2005                [Page 28]

Internet-Draft          Managed Objects of EPON           September 2004


       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that indicates that mode of operation
                of the Reconciliation Sublayer for Point to Point
                Emulation (see [802.3ah] clause 65.1). unknown(1) value
                is assigned in initializing, true state or type not yet
                known. olt(2) value is assigned when Sublayer operating
                in OLT mode. onu(3) value is assigned when Sublayer
                operating in ONU mode."
       REFERENCE   "[802.3ah], 30.3.7.1.2."
       ::= { dot3OmpEmulationEntry 2}

   dot3OmpEmulationStatTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF Dot3OmpEmulationStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "This table defines the list of statistics counters of
                [802.3ah] clause 65 OMP interface."
       ::= { dot3OmpEmulationObjects 2}

   dot3OmpEmulationStatEntry OBJECT-TYPE
       SYNTAX     Dot3OmpEmulationStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "Table entries for Table of statistics counters of
                [802.3ah] clause 65 OMP interface."
       INDEX       { ifIndex }
       ::= { dot3OmpEmulationStatTable 1 }

   Dot3OmpEmulationStatEntry::=
       SEQUENCE {
               dot3OmpEmulationSLDErrors                 Counter32,
               dot3OmpEmulationCRC8Errors                Counter32,
               dot3OmpEmulationBadLLID                   Counter32,
               dot3OmpEmulationGoodLLID                  Counter32,
               dot3OmpEmulationOnuPonCastLLID            Counter32,
               dot3OmpEmulationOltPonCastLLID            Counter32,
               dot3OmpEmulationBroadcastLLIDNotOnuID     Counter32,
               dot3OmpEmulationOnuLLIDNotBroadcast       Counter32,
               dot3OmpEmulationBroadcastLLIDPlusOnuId    Counter32,
               dot3OmpEmulationNotBroadcastLLIDNotOnuId  Counter32
       }

   dot3OmpEmulationSLDErrors OBJECT-TYPE
       SYNTAX  Counter32



Khermosh                 Expires March 21, 2005                [Page 29]

Internet-Draft          Managed Objects of EPON           September 2004


       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that do not contain a valid
                SLD field as defined in [802.3ah] clause 65.1.3.3.1.
                This attribute is mandatory for an OLT and optional for
                an ONU."
       REFERENCE   "[802.3ah], 30.3.7.1.3."
       ::= { dot3OmpEmulationStatEntry 1}

   dot3OmpEmulationCRC8Errors OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field, as defined in [802.3ah] clause 65.1.3.3.1, but do
                not pass the CRC-8 check as defined in [802.3ah] clause
                65.1.3.3.3. This attribute is mandatory for an OLT and
                for an ONU."
       REFERENCE   "[802.3ah], 30.3.7.1.4."
       ::= { dot3OmpEmulationStatEntry 2}


   dot3OmpEmulationBadLLID OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field, as defined in [802.3ah] clause 65.1.3.3.1, and
                pass the CRC-8 check, as defined in [802.3ah] clause
                65.1.3.3.3, but are discarded due to the LLID check as
                defined in [802.3ah] clause 65.1.3.3.2.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.7.1.8."
       ::= { dot3OmpEmulationStatEntry 3}

   dot3OmpEmulationGoodLLID OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD



Khermosh                 Expires March 21, 2005                [Page 30]

Internet-Draft          Managed Objects of EPON           September 2004


                field, as defined in [802.3ah] clause 65.1.3.3.1, and
                pass the CRC-8 check, as defined in [802.3ah] clause
                65.1.3.3.3.
                This attribute is relevant for an OLT and an ONU."
       REFERENCE   "[802.3ah], 30.3.7.1.5."
       ::= { dot3OmpEmulationStatEntry 4}


   dot3OmpEmulationOnuPonCastLLID OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in an ONU, as defined in [802.3ah] 65.1.3.3.1,
                passes the CRC-8 check, as defined in [802.3ah]
                65.1.3.3.3, and the frame meets the rule for acceptance
                defined in [802.3ah] 65.1.3.3.2."
       REFERENCE   "[802.3ah], 30.3.7.1.6."
       ::= { dot3OmpEmulationStatEntry 5}

   dot3OmpEmulationOltPonCastLLID OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in an OLT, as defined in [802.3ah] 65.1.3.3.1,
                passes the CRC-8 check, as defined in [802.3ah]
                65.1.3.3.3, and the frame meets the rule for acceptance
                defined in [802.3ah] 65.1.3.3.2."
       REFERENCE   "[802.3ah], 30.3.7.1.7."
       ::= { dot3OmpEmulationStatEntry 6}

   dot3OmpEmulationBroadcastLLIDNotOnuID OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in a OLT, as defined in [802.3ah] clause
                65.1.3.3.1, and pass the CRC-8 check, as defined in
                [802.3ah] clause 65.1.3.3.3, and contain broadcast LLID
                as defined in [802.3ah] clause 65.
                This attribute is mandatory for an OLT and for an ONU."



Khermosh                 Expires March 21, 2005                [Page 31]

Internet-Draft          Managed Objects of EPON           September 2004


       ::= { dot3OmpEmulationStatEntry 7}

   dot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in a OLT, as defined in [802.3ah] clause
                65.1.3.3.1, and pass the CRC-8 check, as defined in
                [802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID
                as defined in [802.3ah] clause 65. This attribute is
                mandatory for an ONU and mandatory for an OLT (a
                counter per LLID)."
       ::= { dot3OmpEmulationStatEntry 8}

   dot3OmpEmulationBroadcastLLIDPlusOnuId OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in a OLT, as defined in [802.3ah] clause
                65.1.3.3.1, and pass the CRC-8 check, as defined in
                [802.3ah] clause 65.1.3.3.3, and contain the broadcast
                LLID plus ONU's LLID (frame reflected) as defined in
                [802.3ah] clause 65. This attribute is mandatory for an
                ONU and mandatory for an OLT (a counter per LLID)."
       ::= { dot3OmpEmulationStatEntry 9}

   dot3OmpEmulationNotBroadcastLLIDNotOnuId OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of frames received that contain a valid SLD
                field in a OLT, as defined in [802.3ah] clause
                65.1.3.3.1, and pass the CRC-8 check, as defined in
                [802.3ah] clause 65.1.3.3.3, and does not contain the
                ONU's LLID as defined in [802.3ah] clause 65. This
                attribute is mandatory for an ONU"
       ::= { dot3OmpEmulationStatEntry 10}






Khermosh                 Expires March 21, 2005                [Page 32]

Internet-Draft          Managed Objects of EPON           September 2004


        -- Conformance Statements

   -- Conformance Groups

   dot3OmpeGroups OBJECT IDENTIFIER ::={ dot3OmpeConformance 1}


   dot3OmpeGroupID OBJECT-GROUP
       OBJECTS {
               dot3OmpEmulationID,
               dot3OmpEmulationType

       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 OMP emulation ID entity
                state definition."
       ::= { dot3OmpeGroups 1 }


   dot3OmpeGroupStat OBJECT-GROUP
       OBJECTS {
               dot3OmpEmulationSLDErrors,
               dot3OmpEmulationCRC8Errors,
               dot3OmpEmulationBadLLID,
               dot3OmpEmulationGoodLLID,
               dot3OmpEmulationOnuPonCastLLID,
               dot3OmpEmulationOltPonCastLLID,
               dot3OmpEmulationBroadcastLLIDNotOnuID,
               dot3OmpEmulationOnuLLIDNotBroadcast,
               dot3OmpEmulationBroadcastLLIDPlusOnuId,
               dot3OmpEmulationNotBroadcastLLIDNotOnuId
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 OMP emulation
                Statistics"
       ::= { dot3OmpeGroups 2 }


   -- Compliance

   dot3OmpeCompliances OBJECT IDENTIFIER ::= { dot3OmpeConformance 2 }

   dot3OmpeCompliance MODULE-COMPLIANCE
       STATUS      current
       DESCRIPTION "The compliance statement for OMPEmulation
                    interfaces."



Khermosh                 Expires March 21, 2005                [Page 33]

Internet-Draft          Managed Objects of EPON           September 2004


       MODULE  -- this module
       MANDATORY-GROUPS { dot3OmpeGroupID}

       GROUP       dot3OmpeGroupStat
       DESCRIPTION "This group is mandatory for all OMPemulation
                    supporting interfaces for Statistics collection."

       ::= { dot3OmpeCompliances 1}




   -- Editor-s note:   MAU managed object definitions (30.5.1)

   dot3EponMauMIB OBJECT IDENTIFIER ::= { dot3EfmeponMIB 3}

   dot3EponMauObjects OBJECT IDENTIFIER ::= { dot3EponMauMIB 1}

   dot3EponMauConformance OBJECT IDENTIFIER ::= { dot3EponMauMIB 2 }

   dot3EponMauTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF Dot3EponMauEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "Table for dot3 MAU EPON MIB modules."
       ::= { dot3EponMauObjects 1 }

   dot3EponMauEntry OBJECT-TYPE
       SYNTAX  Dot3EponMauEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "An entry in the dot3 MAU EPON MIB modules table."
       INDEX  { ifIndex }
       ::= { dot3EponMauTable 1 }

   Dot3EponMauEntry ::=
       SEQUENCE {
               dot3EponMauPCSCodingViolation           Counter32,
               dot3EponMauFecAbility                   INTEGER,
               dot3EponMauFecMode                      INTEGER,
               dot3EponMauFECCorrectedBlocks           Counter32,
               dot3EponMauFECUncorrectableBlocks       Counter32,
               dot3EponMauBufferHeadCodingViolation    Counter32
       }





Khermosh                 Expires March 21, 2005                [Page 34]

Internet-Draft          Managed Objects of EPON           September 2004


   dot3EponMauPCSCodingViolation OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "octets"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "For 100 Mb/ s operation it is a count of the number of
                times an invalid code-group is received, other than the
                /H/ code-group. For 1000 Mb/ s operation it is a count
                of the number of times an invalid codegroup is received,
                other than the /V/ code-group."
       REFERENCE   "[802.3ah], 30.5.1.1.12."
       ::= { dot3EponMauEntry 1}

   dot3EponMauFecAbility OBJECT-TYPE
       SYNTAX  INTEGER {
               unknown (1),
               nonsupported (2),
               supported (3)
       }
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only value that indicates the support of
                operation of the 1000BASE-PX PHY optional FEC Sublayer
                for Forward error correction see [802.3ah] clause 65.2).
                unknown(1) value is assigned in initializing, for non
                FEC support state or type not yet known. nonsupported(2)
                value is assigned when Sublayer is not support.
                supported(3) value is assigned when Sublayer is
                supported."
       REFERENCE   "[802.3ah], 30.5.1.1.13."
       ::= { dot3EponMauEntry 2}

   dot3EponMauFecMode OBJECT-TYPE
       SYNTAX  INTEGER {
               unknown (1),
               disabled (2),
               enabled (3)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "A read-write value that indicates the mode of operation
                of the 1000BASE-PX PHY optional FEC Sublayer for Forward
                error correction see [802.3ah] clause 65.2).
                A GET operation returns the current mode of operation
                the PHY. A SET operation changes the mode of operation



Khermosh                 Expires March 21, 2005                [Page 35]

Internet-Draft          Managed Objects of EPON           September 2004


                of the PHY to the indicated value. unknown(1) value is
                assigned in initializing, for non FEC support state or
                type not yet known. disabled(2) value is assigned when
                Sublayer operating in disabled mode. enabled(3) value is
                assigned when Sublayer operating in FEC mode. writing
                can be done all the time."
       REFERENCE   "[802.3ah], 30.5.1.1.14."
       DEFVAL { 1 }
       ::= { dot3EponMauEntry 3}

   dot3EponMauFECCorrectedBlocks OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count
                of corrected FEC blocks. This counter will not increment
                for other PHY Types. Increment the counter by one for
                each received block that is corrected by the FEC
                function in the PHY."
       REFERENCE   "[802.3ah], 30.5.1.1.15."
       ::= { dot3EponMauEntry 4}

   dot3EponMauFECUncorrectableBlocks OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of
                uncorrectable FEC blocks. This counter will not
                increment for other PHY Types. Increment the counter by
                one for each FEC block that is determined to be
                uncorrectable by the FEC function in the PHY."
       REFERENCE   "[802.3ah], 30.5.1.1.16."
       ::= { dot3EponMauEntry 5}

   dot3EponMauBufferHeadCodingViolation OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "octets"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "For 1000 Mbps operation it is a counts of the number of
                invalid code-group received directly from the link."
       ::= { dot3EponMauEntry 6}






Khermosh                 Expires March 21, 2005                [Page 36]

Internet-Draft          Managed Objects of EPON           September 2004


   -- Defining EPON MAU types
   -- Editor's Note: This section should be added to 802.3 MAU MIB
   -- module RFC. Preference would be that the MAU MIB module
   -- structure would change so that it is re-written as an
   -- IANA-maintained module.

   dot3EponMauType OBJECT IDENTIFIER ::= { dot3EponMauMIB 3 }

   eponMauType1000BasePXOLT OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65) OLT
                    (master), unknown PMD"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 1 }

   eponMauType1000BasePXONU OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65),ONU
       (slave), unknown PMD"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 2 }

   eponMauType1000BasePX10DOLT OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
                    OLT side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 3 }

   eponMauType1000BasePX10DONU OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
                    ONU side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 4 }

   eponMauType1000BasePX10UOLT OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
                    OLT side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 5 }

   eponMauType1000BasePX10UONU OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
                    ONU side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."



Khermosh                 Expires March 21, 2005                [Page 37]

Internet-Draft          Managed Objects of EPON           September 2004


       ::= { dot3EponMauType 6 }


   eponMauType1000BasePX20DOLT OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
                    OLT side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 7 }

   eponMauType1000BasePX20DONU OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
                    ONU side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 8 }

   eponMauType1000BasePX20UOLT OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
                    OLT side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 9 }

   eponMauType1000BasePX20UONU OBJECT-IDENTITY
       STATUS      current
       DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
                    ONU side"
       REFERENCE   "[802.3ah], 30.5.1.1.2."
       ::= { dot3EponMauType 10 }


        -- Conformance Statements

   -- Conformance Groups

   dot3EponMauGroups OBJECT IDENTIFIER ::={ dot3EponMauConformance 1}

   dot3EponMauGroupAll OBJECT-GROUP
       OBJECTS {
               dot3EponMauPCSCodingViolation
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of dot3 MAU definition."
       ::= { dot3EponMauGroups 1 }

   dot3EponMauGroupFEC OBJECT-GROUP



Khermosh                 Expires March 21, 2005                [Page 38]

Internet-Draft          Managed Objects of EPON           September 2004


       OBJECTS {
               dot3EponMauFecAbility,
               dot3EponMauFecMode,
               dot3EponMauFECCorrectedBlocks,
               dot3EponMauFECUncorrectableBlocks,
               dot3EponMauBufferHeadCodingViolation
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of FEC group definition."
       ::= { dot3EponMauGroups 2 }


   -- Compliance

   dot3EponMauCompliances OBJECT IDENTIFIER::={dot3EponMauConformance 2}

   dot3EponMauCompliance MODULE-COMPLIANCE
       STATUS      current
       DESCRIPTION "The compliance statement for MAU EPON interfaces."

       MODULE  -- this module
       MANDATORY-GROUPS { dot3EponMauGroupAll }

       GROUP       dot3EponMauGroupFEC
       DESCRIPTION "This group is mandatory for all EPON MAU devices
                    Supporting FEC functionality as for Definitions and
                    BER Statistics collection."

       ::= { dot3EponMauCompliances 1}


   END


















Khermosh                 Expires March 21, 2005                [Page 39]

Internet-Draft          Managed Objects of EPON           September 2004


9.  Definitions - The EPON Device MIB





        EPON-DEVICE-MIB DEFINITIONS ::= BEGIN


       IMPORTS
           MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
           Unsigned32, Integer32, zeroDotZero
               FROM SNMPv2-SMI
           TruthValue, DateAndTime, RowStatus, MacAddress
               FROM SNMPv2-TC
           ifIndex
               FROM IF-MIB
           MODULE-COMPLIANCE, OBJECT-GROUP
               FROM SNMPv2-CONF
            SnmpAdminString
               FROM SNMP-FRAMEWORK-MIB
       ;

   eponDeviceMIB MODULE-IDENTITY
       LAST-UPDATED "200409210000Z"  -- September 21, 2004
       ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working
                     Group"
       CONTACT-INFO
                    "WG charter:
                  http://www.ietf.org/html.charters/hubmib-charter.html
                     Mailing Lists:
                       General Discussion: hubmib@ietf.org
                       To Subscribe: hubmib-request@ietf.org
                       In Body: subscribe your_email_address
                     Chair: Dan Romascanu
                     Postal: Avaya Inc.
                             Atidim Technology Park, Bldg. 3
                             Tel Aviv 61131
                             Israel
                        Tel: +972-3-645-8414
                     E-mail: dromasca@avaya.com

                     Editor: Lior Khermosh
                     Postal: Passave Technologies Inc.
                             Ackerstein Towers, Tower A, 6th floor,
                             9 Hamenofim St.
                             Hertzliya Pituach 46725,
                             ISRAEL



Khermosh                 Expires March 21, 2005                [Page 40]

Internet-Draft          Managed Objects of EPON           September 2004


                     P.O.Box 2089 Hertzliya Pituach 46120 Israel
                     Tel:    +972-9-9717600 Ext: 7181
                     E-mail: lior.khermosh@passave.com"
       DESCRIPTION
               "The objects in this MIB module are used to manage
                Ethernet Passive Optical Network (EPON) devices which
                are based on the Ethernet in the First Mile (EFM) PON
                as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65.

                The following reference is used throughout this MIB
                module:
                [802.3ah] refers to:
                IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
                Information technology - Telecommunications and
                information exchange between systems - Local and
                metropolitan area networks - Specific requirements -
                Part 3: Carrier sense multiple access with collision
                detection (CSMA/CD) access method and physical layer
                specifications - Media Access Control Parameters,
                Physical Layers and Management Parameters for subscriber
                access networks', 22 April 2004.
                Of particular interest are Clause 64(MPCP) 65(P2mP RS)
                and 60 (PON PMDs). Clause 30, 'Management', and Clause
                45,'Management Data Input/Output (MDIO) Interface'.

                Copyright (C) The Internet Society (2004).  This version
                of this MIB module is part of XXXX see the RFC itself
                for full legal notices."

             -- Editor's Note: Replace XXXX with the actual RFC number
             -- assigned by RFC Editor and remove this note

             REVISION    "200409210000Z"  -- September 21, 2004
             DESCRIPTION "Initial version, published as RFC XXXX."

       ::= { mib-2 XXX }

             -- Editor's Note: Replace XXX with a real OID once it is
             -- assigned by IANA and remove this note.

   eponDeviceObjectMIB OBJECT IDENTIFIER ::= { eponDeviceMIB 1}

   eponDeviceObjects OBJECT IDENTIFIER ::= { eponDeviceObjectMIB  1}

   eponDeviceConformance OBJECT IDENTIFIER ::= { eponDeviceObjectMIB  2}

   eponDeviceControlObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 1}




Khermosh                 Expires March 21, 2005                [Page 41]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceStatObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 2}

   eponDeviceEventObjects OBJECT IDENTIFIER ::= { eponDeviceObjects 3}


   eponDeviceControlTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF EponDeviceControlEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "Table for EPON device MIB modules."
       ::= { eponDeviceControlObjects 1 }

   eponDeviceControlEntry OBJECT-TYPE
       SYNTAX  EponDeviceControlEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
               "An entry in the EPON device Control table."
       INDEX  { ifIndex }
       ::= { eponDeviceControlTable 1 }

   EponDeviceControlEntry ::=
       SEQUENCE {
        eponDeviceObjectReset                       INTEGER,
        eponDeviceObjectModes                       INTEGER,
        eponDeviceObjectFecEnabled                  INTEGER,
        eponDeviceObjectOamMode                     INTEGER,
        eponDeviceObjectDeviceReadyMode             INTEGER,
        eponDeviceObjectPowerDown                   TruthValue,
        eponDeviceObjectNumberOfLLIDs               Integer32,
        eponDeviceObjectReportThreshold             Integer32,
        eponDeviceRemoteMACAddressLLIDControl       INTEGER
       }


   eponDeviceObjectReset OBJECT-TYPE
       SYNTAX  INTEGER {
               running(1),
               reset(2)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "This variable is used to reset the EPON device. The
                interface may be unavailable while the reset occurs and
                data may be lost. During reading operation it returns
                the state of the EPON device. running(1) indicates and



Khermosh                 Expires March 21, 2005                [Page 42]

Internet-Draft          Managed Objects of EPON           September 2004


                operates normal operation, reset(2) indicates and
                operates reset mode. Writing can be done all the time."
       DEFVAL { 1 }
       ::= { eponDeviceControlEntry 1 }

   eponDeviceObjectModes OBJECT-TYPE
       SYNTAX  INTEGER {
               olt(1),
               onu(2)
       }
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "This variable defines the mode of the EPON device. When
                an olt(1) it is an Optical Line Terminal device (server)
                and when an onu(2) and Optical Network Unit device
                (client)"
       ::= { eponDeviceControlEntry 2 }

   eponDeviceObjectFecEnabled OBJECT-TYPE
       SYNTAX  INTEGER {
               noFecEnabled (1),
               fecTxEnabled (2),
               fecRxEnabled (3),
               fecTxRxEnabled (4)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
             "This variable defines and provides information whether the
              EPON device uses FEC as defined in the [802.3ah] clause
              65.2 for EPON. When noFECEnabled(1) the device does not
              support FEC mode When fecTxEnabled(2) the device supports
              the FEC transmission mode. When fecRxEnabled(3) the device
              supports the FEC Receive mode. When fecTxRxEnabled(4) the
              device supports the FEC transmission and receive mode.
              Writing can be done all the time.
              This attribute is relevant for an OLT and an ONU."
       DEFVAL { 1 }
       ::= { eponDeviceControlEntry 4 }

   eponDeviceObjectOamMode OBJECT-TYPE
       SYNTAX  INTEGER {
               noOam (1),
               oamServer (2),
               oamclient (3)
       }
       MAX-ACCESS  read-write



Khermosh                 Expires March 21, 2005                [Page 43]

Internet-Draft          Managed Objects of EPON           September 2004


       STATUS  current
       DESCRIPTION
               "This variable defines and provides information on the
                Operation Administration and Maintenance (OAM) mode of
                an EPON device as defined by the [802.3ah] clause 57.
                When noOam(1) the device does not supports the OAM mode.
                When oamServer(2) the device supports the OAM mode as a
                server unit. When oamClient(3) the device supports the
                OAM mode as a client unit.
                Writing can be done during initialization,
                eponDeviceObjectDeviceReadyMode is in notReady(1) or
                inProcess(2).
                This attribute is relevant for an OLT and an ONU."
       DEFVAL { 1 }
       ::= { eponDeviceControlEntry 5 }


   eponDeviceObjectDeviceReadyMode     OBJECT-TYPE
       SYNTAX  INTEGER {
               notReady (1),
               inProcess (2),
               ready (3)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "This variable defines the mode of an EPON device and
                provides information on the mode in initialization -
                ready for registration as defined by the [802.3ah]
                clause 64.
                When notReady(1) the device is not ready for operation.
                When inProcess(2) the device is in initialization
                process.
                When ready(3) the device is ready for registration.
                Writing can be done all the time.
                This attribute is relevant for an OLT and an ONU."
       DEFVAL { 1 }
       ::= { eponDeviceControlEntry 6 }

   eponDeviceObjectPowerDown OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "Setting this variable to True(1) will cause Device to be
                entered into Power down mode where no registration is
                allowed and only receiving data from the link.
                Writing can be done all the time.



Khermosh                 Expires March 21, 2005                [Page 44]

Internet-Draft          Managed Objects of EPON           September 2004


                This attribute is relevant for an OLT and an ONU."
       DEFVAL { false }
       ::= { eponDeviceControlEntry 7 }


   eponDeviceObjectNumberOfLLIDs OBJECT-TYPE
       SYNTAX  Integer32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read only variable which defines the number of
                registered LLIDs (as defined by the [802.3ah] clause 65)
                in a EPON network for an OLT and an ONU. Initialization
                value is 0.
                This attribute is relevant for an OLT and an ONU."
       ::= { eponDeviceControlEntry 8 }

   eponDeviceObjectReportThreshold OBJECT-TYPE
       SYNTAX  Integer32
       UNITS       "TQ (16nsec)"
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "A set of 8 integers, for each LLID, that defines the
                threshold reporting for each Queue in the REPORT
                message, as defined in [802.3ah] 64. First Queue set
                reporting will provide information on the queue
                occupancy of frames below this Threshold. The value
                returned shall be in Time quanta (TQ) which is 16nsec or
                2 octets increments.
                Writing can be done all the time.
                This attribute is relevant for an OLT and an ONU."
       DEFVAL { 0 }
       ::= { eponDeviceControlEntry 9 }

   eponDeviceRemoteMACAddressLLIDControl OBJECT-TYPE
       SYNTAX INTEGER {
               none(1),
               resetLog(2),
               useDefaultReporting(3)
       }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Indicates and controls the resetting of the LLID MAC
                address log. Setting this object to none(1) has no
                action resetLog(2) empties the LLID MAC address log. All
                data is deleted. Setting it to useDefaultReporting(3)



Khermosh                 Expires March 21, 2005                [Page 45]

Internet-Draft          Managed Objects of EPON           September 2004


                returns all entries priorities to their factory-default
                reporting. Reading this object always returns
                useDefaultReporting(3)."
       DEFVAL { 3 }
       ::= { eponDeviceControlEntry 10 }

   eponDeviceRemoteMACAddressLLIDTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF EponDeviceRemoteMACAddressLLIDEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A table of read-only value that identifies the
                source_address and LLIDs parameter of the remote devices
                in the network. This MacAddress value, as defined in
                [802.3ah], 30.3.5.1.5, is updated on reception of a
                valid frame with a unicast destination Field or
                (1) a destination Field equal to the reserved multicast
                address for MAC Control specified in [802.3ah] Annex
                31A, (2) lengthOrType field value equal to the reserved
                Type for MAC Control as specified in [802.3ah] Annex
                31A. (3)an MPCP subtype value equal to the subtype
                reserved for MPCP as specified in [802.3ah] Annex 31A,
                and an LLID as allocated by the OLT. The table is
                defined as Remote MAC address - LLID (RMadL)
                The table is relevant only for an OLT device, and is
                equivalent from a bridge emulation to the bridge
                port-MAC address table where the LLIDs are equivalent to
                virtual bridge ports."
       ::= { eponDeviceControlObjects 2 }


   eponDeviceRemoteMACAddressLLIDEntry OBJECT-TYPE
       SYNTAX      EponDeviceRemoteMACAddressLLIDEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A group of entries.  Applications create and delete
                entries using eponDeviceRMadlEntryStatus.
                When adding objects to an LLID they are added in the
                persistent order of their index in this table."
       INDEX       {ifIndex }
       ::= { eponDeviceRemoteMACAddressLLIDTable 1 }

       EponDeviceRemoteMACAddressLLIDEntry ::=
       SEQUENCE {
               eponDeviceRemoteMACAddressLLIDName    SnmpAdminString,
               eponDeviceRMadlLLID                   Unsigned32,
               eponDeviceRMadlLogID                  OBJECT IDENTIFIER,



Khermosh                 Expires March 21, 2005                [Page 46]

Internet-Draft          Managed Objects of EPON           September 2004


               eponDeviceRMadlRemoteAddress          MacAddress,
               eponDeviceRMadlType                   INTEGER,
               eponDeviceRMadlAction                 INTEGER,
               eponDeviceRMadlEntryStatus            RowStatus
       }

   eponDeviceRemoteMACAddressLLIDName OBJECT-TYPE
       SYNTAX      SnmpAdminString (SIZE (1..32))
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A locally-unique, administratively assigned name for a
                group of entries."
       ::= { eponDeviceRemoteMACAddressLLIDEntry 1 }

   eponDeviceRMadlLLID OBJECT-TYPE
       SYNTAX      Unsigned32 (1..4294967295)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "An arbitrary integer for the purpose of identifying the
                LLID. Writing can be done all the time."
       DEFVAL { 1 }
       ::= { eponDeviceRemoteMACAddressLLIDEntry 2 }


   eponDeviceRMadlLogID OBJECT-TYPE
       SYNTAX      OBJECT IDENTIFIER
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The object identifier of a MIB module object to add to
                an entry, indicating the entry ID in the table. Writing
                can be done all the time."
       DEFVAL { zeroDotZero }
       ::= { eponDeviceRemoteMACAddressLLIDEntry 3 }

   eponDeviceRMadlRemoteAddress OBJECT-TYPE
       SYNTAX     MacAddress
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The remote MAC address of the LLID.
                Writing can be done all the time."
       ::= { eponDeviceRemoteMACAddressLLIDEntry 4 }


   eponDeviceRMadlType OBJECT-TYPE



Khermosh                 Expires March 21, 2005                [Page 47]

Internet-Draft          Managed Objects of EPON           September 2004


       SYNTAX  INTEGER {
               notRegister (1),
               registered (2)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "A list of types for entries - LLIDs. Indicates and
                defines the state of registration. notRegister(1) marks
                a non registered LID, registered(2) marks a registered
                LLID.  Writing can be done all the time."
       DEFVAL { 1 }
       ::= { eponDeviceRemoteMACAddressLLIDEntry 5 }

   eponDeviceRMadlAction OBJECT-TYPE
       SYNTAX  INTEGER {
               none (1),
               register (2),
               deregister (3),
               reregister (4)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
               "A list of actions for an entry - LLID.  Indicates and
                defines the state of registration for the remote device.
                none(1) marks no action, register(2) marks to register
                an LLID, deregister(3) marks to deregister an LLID,
                reregister(4) marks reregistered LLID.
                Writing can be done all the time."
       DEFVAL { 1 }
       ::= { eponDeviceRemoteMACAddressLLIDEntry 6 }


   eponDeviceRMadlEntryStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The control that allows creation and deletion of
                entries. Once made active an entry MAY not be modified
                except to delete it."
      ::= { eponDeviceRemoteMACAddressLLIDEntry 7 }




   --Statistics tables



Khermosh                 Expires March 21, 2005                [Page 48]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceStatTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF EponDeviceStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "This table defines the list of statistics counters of
                EPON devices. The attributes are relevant for an OLT and
                an ONU."
       ::= { eponDeviceStatObjects 1}

   eponDeviceStatEntry OBJECT-TYPE
       SYNTAX     EponDeviceStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "Table entries for Table of statistics counters of EPON
                devices."
       INDEX       { ifIndex }
       ::= { eponDeviceStatTable 1 }

   EponDeviceStatEntry::=
       SEQUENCE {
               eponDeviceStatTxFramesQueue0            Counter32,
               eponDeviceStatTxFramesQueue1            Counter32,
               eponDeviceStatTxFramesQueue2            Counter32,
               eponDeviceStatTxFramesQueue3            Counter32,
               eponDeviceStatTxFramesQueue4            Counter32,
               eponDeviceStatTxFramesQueue5            Counter32,
               eponDeviceStatTxFramesQueue6            Counter32,
               eponDeviceStatTxFramesQueue7            Counter32,
               eponDeviceStatRxFramesQueue0            Counter32,
               eponDeviceStatRxFramesQueue1            Counter32,
               eponDeviceStatRxFramesQueue2            Counter32,
               eponDeviceStatRxFramesQueue3            Counter32,
               eponDeviceStatRxFramesQueue4            Counter32,
               eponDeviceStatRxFramesQueue5            Counter32,
               eponDeviceStatRxFramesQueue6            Counter32,
               eponDeviceStatRxFramesQueue7            Counter32,
               eponDeviceStatDroppedFramesQueue0       Counter32,
               eponDeviceStatDroppedFramesQueue1       Counter32,
               eponDeviceStatDroppedFramesQueue2       Counter32,
               eponDeviceStatDroppedFramesQueue3       Counter32,
               eponDeviceStatDroppedFramesQueue4       Counter32,
               eponDeviceStatDroppedFramesQueue5       Counter32,
               eponDeviceStatDroppedFramesQueue6       Counter32,
               eponDeviceStatDroppedFramesQueue7       Counter32
       }




Khermosh                 Expires March 21, 2005                [Page 49]

Internet-Draft          Managed Objects of EPON           September 2004


     eponDeviceStatTxFramesQueue0 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-0- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-0-.
                The -Queue-0- marking matched the REPORT MPCP message
                Queue-0 field, as defined in [802.3ah] clause 64. This
                counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 1}

   eponDeviceStatTxFramesQueue1 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-1- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-1-.
                The -Queue-1- marking matched the REPORT MPCP message
                Queue-1 field, as defined in [802.3ah] clause 64. This
                counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 2}

   eponDeviceStatTxFramesQueue2 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-2- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-2-.
                The -Queue-2- marking matched the REPORT MPCP message
                Queue-2 field, as defined in [802.3ah] clause 64. This
                counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 3}

   eponDeviceStatTxFramesQueue3 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION



Khermosh                 Expires March 21, 2005                [Page 50]

Internet-Draft          Managed Objects of EPON           September 2004


               "A count of the number of times a -Queue-3- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-3-.
                The -Queue-3- marking matched the REPORT MPCP message
                Queue-3 field, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU."
           ::= { eponDeviceStatEntry 4}

   eponDeviceStatTxFramesQueue4 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-4- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-4-.
                The -Queue-4- marking matched the REPORT MPCP message
                Queue-4 field, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 5}

   eponDeviceStatTxFramesQueue5 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-5- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-5-.
                The -Queue-5- marking matched the REPORT MPCP message
                Queue-5 field, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 6}

   eponDeviceStatTxFramesQueue6 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-6- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-6-.
                The -Queue-6- marking matched the REPORT MPCP message
                Queue-6 field, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU."



Khermosh                 Expires March 21, 2005                [Page 51]

Internet-Draft          Managed Objects of EPON           September 2004


       ::= { eponDeviceStatEntry 7}

   eponDeviceStatTxFramesQueue7 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION
               "A count of the number of times a -Queue-7- frames
                transmission occurs. Increment the counter by one for
                each frame transmitted which is an output of -Queue-7-.
                The -Queue-7- marking matched the REPORT MPCP message
                Queue-7 field, as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 8}

   eponDeviceStatRxFramesQueue0 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-0- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-0-. The -Queue-0-
                marking matched the REPORT MPCP message Queue-0 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 9}

   eponDeviceStatRxFramesQueue1 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-1- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-1-. The -Queue-1-
                marking matched the REPORT MPCP message Queue-1 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 10}




Khermosh                 Expires March 21, 2005                [Page 52]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceStatRxFramesQueue2 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-2- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-2-. The -Queue-2-
                marking matched the REPORT MPCP message Queue-2 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 11}

   eponDeviceStatRxFramesQueue3 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-3- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-3-. The -Queue-3-
                marking matched the REPORT MPCP message Queue-3 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 12}

   eponDeviceStatRxFramesQueue4 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-4- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-4-. The -Queue-4-
                marking matched the REPORT MPCP message Queue-4 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 13}




Khermosh                 Expires March 21, 2005                [Page 53]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceStatRxFramesQueue5 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-5- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-5-. The -Queue-5-
                marking matched the REPORT MPCP message Queue-5 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 14}

   eponDeviceStatRxFramesQueue6 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-6- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-6-. The -Queue-6-
                marking matched the REPORT MPCP message Queue-6 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 15}

   eponDeviceStatRxFramesQueue7 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-7- frames
                reception occurs. A single counter at the ONU and a set
                of counters, one for each LLID, at the OLT. Increment
                the counter by one for each frame received for each
                LLID, which is an output of -Queue-7-. The -Queue-7-
                marking matched the REPORT MPCP message Queue-7 field,
                as defined in [802.3ah] clause 64.
                This counter is mandatory for an ONU and an OLT."
       ::= { eponDeviceStatEntry 16}




Khermosh                 Expires March 21, 2005                [Page 54]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceStatDroppedFramesQueue0 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-0- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-0-. The -Queue-0- marking matched
                the REPORT MPCP message Queue-0 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 17}

   eponDeviceStatDroppedFramesQueue1 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-1- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-1-. The -Queue-1- marking matched
                the REPORT MPCP message Queue-1 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 18}

   eponDeviceStatDroppedFramesQueue2 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-2- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-2-. The -Queue-2- marking matched
                the REPORT MPCP message Queue-2 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 19}

   eponDeviceStatDroppedFramesQueue3 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION



Khermosh                 Expires March 21, 2005                [Page 55]

Internet-Draft          Managed Objects of EPON           September 2004


               "A count of the number of times a -Queue-3- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-3-. The -Queue-3- marking matched
                the REPORT MPCP message Queue-3 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 20}

   eponDeviceStatDroppedFramesQueue4 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-4- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-4-. The -Queue-4- marking matched
                the REPORT MPCP message Queue-4 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 21}

   eponDeviceStatDroppedFramesQueue5 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-5- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-5-. The -Queue-5- marking matched
                the REPORT MPCP message Queue-5 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 22}

   eponDeviceStatDroppedFramesQueue6 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-6- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-6-. The -Queue-6- marking matched
                the REPORT MPCP message Queue-6 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."



Khermosh                 Expires March 21, 2005                [Page 56]

Internet-Draft          Managed Objects of EPON           September 2004


       ::= { eponDeviceStatEntry 23}

   eponDeviceStatDroppedFramesQueue7 OBJECT-TYPE
       SYNTAX  Counter32
       UNITS      "frames"
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A count of the number of times a -Queue-7- frames drops
                occurs. Increment the counter by one for each frame
                dropped from -Queue-7-. The -Queue-7- marking matched
                the REPORT MPCP message Queue-7 field, as defined in
                [802.3ah] clause 64.
                This counter is mandatory for an ONU."
       ::= { eponDeviceStatEntry 24}

   --Editor's Note use reference to event MIB modules [RFC2981] and
   --docsis MIB modules [RFC2669]


   eponDeviceEventObjectTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF EponDeviceEventObjectEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "This table defines the Event Objects for EPON devices.
                The attributes are relevant for an OLT and an ONU."
       ::= { eponDeviceEventObjects 1}

   eponDeviceEventObjectEntry OBJECT-TYPE
       SYNTAX     EponDeviceEventObjectEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
               "Table entries for Table of Event objects for EPON
                devices."
       INDEX       { ifIndex }
       ::= { eponDeviceEventObjectTable 1 }

   EponDeviceEventObjectEntry::=
       SEQUENCE {
   eponDeviceSampleMinimum                               Integer32,
   eponDeviceDyingGaspAlarmState                         TruthValue,
   eponDeviceDyingGaspAlarmEnabled                       TruthValue,
   eponDeviceCriticalEventState                          TruthValue,
   eponDeviceCriticalEventEnabled                        TruthValue,
   eponDeviceLocalLinkFaultAlarmState                    TruthValue,
   eponDeviceLocalLinkFaultAlarmEnabled                  TruthValue,



Khermosh                 Expires March 21, 2005                [Page 57]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceTemperatureEventIndicationState             TruthValue,
   eponDeviceTemperatureEventIndicationEnabled           TruthValue,
   eponDevicePowerVoltageEventIndicationState            TruthValue,
   eponDevicePowerVoltageEventIndicationEnabled          TruthValue,
   eponDeviceGlobalEventState                            TruthValue,
   eponDeviceGlobalEventEnabled                          TruthValue,
   eponDeviceErroredSymbolPeriodEventState               TruthValue,
   eponDeviceErroredSymbolPeriodEventEnabled             TruthValue,
   eponDeviceErroredFrameEventState                      TruthValue,
   eponDeviceErroredFrameEventEnabled                    TruthValue,
   eponDeviceErroredFramePeriodEventState                TruthValue,
   eponDeviceErroredFramePeriodEventEnabled              TruthValue,
   eponDeviceErroredFrameSecondsSummaryEventState        TruthValue,
   eponDeviceErroredFrameSecondsSummaryEventEnabled      TruthValue,
   eponDeviceOrganizationSpecificEventState              TruthValue,
   eponDeviceOrganizationSpecificEventEnabled            TruthValue,
   eponDeviceEventControl                                INTEGER
       }

   eponDeviceSampleMinimum OBJECT-TYPE
       SYNTAX      Integer32 (1..2147483647)
       UNITS       "seconds"
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The minimum Frequency of events this system will accept.
                A system may use the larger values of this minimum to
                lessen the impact of constant sampling. For larger
                sampling intervals the system samples less often and
                suffers less overhead.
                Unless explicitly resource limited, a system's value for
                this object SHOULD be 1, allowing as small as a 1 second
                interval for ongoing trigger sampling.
                Writing of the value can be done all the time."
       DEFVAL { 1 }
       ::= { eponDeviceEventObjectEntry 1 }

   eponDeviceDyingGaspAlarmState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Dying Gasp indication of the OAM alarm indications as
                described in the [802.3ah] clause 57. When true the
                device has a dying gasp alarm asserted. When false the
                dying gasp alarm is reset "
       ::= { eponDeviceEventObjectEntry 2}



Khermosh                 Expires March 21, 2005                [Page 58]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceDyingGaspAlarmEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow DyingGaspAlarm event to be used.
                When the value is true the event is sampled. When the
                value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 3 }

   eponDeviceCriticalEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Critical Event indication of the OAM alarm indications
                as described in the [802.3ah] clause 57. When true the
                device has a Critical Event asserted. When false the
                Critical Event is reset."
       ::= { eponDeviceEventObjectEntry 4 }

   eponDeviceCriticalEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow CriticalEvent event to be used. When
                the value is true the event is sampled. When the value
                is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 5 }


      eponDeviceLocalLinkFaultAlarmState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Local Link Fault indication of the OAM alarm indications
                as described in the [802.3ah] clause 57. When true the
                device has a Local Link Fault alarm asserted. When
                false the Local Link Fault alarm is reset."
       ::= { eponDeviceEventObjectEntry 6 }



Khermosh                 Expires March 21, 2005                [Page 59]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceLocalLinkFaultAlarmEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow LocalLinkFaultAlarm event to be used.
                When the value is true the event is sampled. When the
                value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 7 }


      eponDeviceTemperatureEventIndicationState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Temperature Event indication of an EPON device. When
                condition of box temperature is above the threshold
                defined the alarm is asserted. When the condition is
                below that threshold the alarm is de-asserted. When true
                the device has a Temperature Event Indication asserted.
                When false the Temperature Event Indication is reset."
       ::= { eponDeviceEventObjectEntry 8 }

   eponDeviceTemperatureEventIndicationEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow TemperatureEventIndication event to
                be used. When the value is true the event is sampled.
                When the value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 9 }

   eponDevicePowerVoltageEventIndicationState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Power/Voltage Event Indication of an EPON device. When
                condition of box Power/voltage is above the threshold
                defined the alarm is asserted. When the condition is



Khermosh                 Expires March 21, 2005                [Page 60]

Internet-Draft          Managed Objects of EPON           September 2004


                below that threshold the alarm is de-asserted. When true
                the device has a Power/Voltage Event Indication
                asserted. When false the Power/Voltage Event Indication
                is reset. "
       ::= { eponDeviceEventObjectEntry 10 }


   eponDevicePowerVoltageEventIndicationEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow PowerVoltageEventIndication event to
                be used. When the value is true the event is sampled.
                When the value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 11 }


      eponDeviceGlobalEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Global Event indication of an EPON device. When the
                indication of the event input occurs the event is
                asserted. When the input is removed that event is
                de-asserted. When true the device has a Global Event
                asserted. When false the Global Event Indication is
                reset."
       ::= { eponDeviceEventObjectEntry 12 }

   eponDeviceGlobalEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow GlobalEvent event to be used. When
                the value is true the event is sampled. When the value
                is false the event is not sampled. Writing can be done
                all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 13 }

   eponDeviceErroredSymbolPeriodEventState OBJECT-TYPE
       SYNTAX  TruthValue



Khermosh                 Expires March 21, 2005                [Page 61]

Internet-Draft          Managed Objects of EPON           September 2004


       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Errored Symbol Period Event indication of the OAM alarm
                TLV indications as described in the [802.3ah]
                clause 57.5.3. When true the device has an Errored
                Symbol Period Event asserted. When false the Errored
                Symbol Period Event is reset."
       ::= { eponDeviceEventObjectEntry 14}

   eponDeviceErroredSymbolPeriodEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow ErroredSymbolPeriodEvent event to be
                used. When the value is true the event is sampled. When
                the value is false the event is not sampled. Writing can
                be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 15 }

   eponDeviceErroredFrameEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Errored Frame Event indication of the OAM alarm TLV
                indications as described in the [802.3ah] clause 57.5.3.
                When true the device has an Errored Frame Event
                asserted. When false the Errored Frame Event is reset."
       ::= { eponDeviceEventObjectEntry 16 }

   eponDeviceErroredFrameEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow ErroredFrameEvent event to be used.
                When the value is true the event is sampled. When the
                value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 17 }





Khermosh                 Expires March 21, 2005                [Page 62]

Internet-Draft          Managed Objects of EPON           September 2004


   eponDeviceErroredFramePeriodEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Errored Frame Period Event indication of the OAM alarm
                TLV indications as described in the [802.3ah] clause
                57.5.3. When true the device has an Errored Frame Period
                Event asserted. When false the Errored Frame Period
                Event is reset."
       ::= { eponDeviceEventObjectEntry 18 }

   eponDeviceErroredFramePeriodEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow ErroredFramePeriodEvent event to be
                used. When the value is true the event is sampled. When
                the value is false the event is not sampled. Writing can
                be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 19 }


   eponDeviceErroredFrameSecondsSummaryEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Errored Frame Seconds Summary Event indication of the
                OAM alarm TLV indications as described in the [802.3ah]
                clause 57.5.3. When true the device has an Errored Frame
                Seconds Summary Event asserted. When false the Errored
                Frame Seconds Summary Event is reset."
       ::= { eponDeviceEventObjectEntry 20 }

   eponDeviceErroredFrameSecondsSummaryEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow ErroredFrameSecondsSummaryEvent event
                to be used. When the value is true the event is sampled.
                When the value is false the event is not sampled.
                Writing can be done all the time."



Khermosh                 Expires March 21, 2005                [Page 63]

Internet-Draft          Managed Objects of EPON           September 2004


       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 21 }


   eponDeviceOrganizationSpecificEventState OBJECT-TYPE
       SYNTAX  TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A read-only variable, which defines the state of the
                Organization Specific Event indication of the OAM alarm
                TLV indications as described in the [802.3ah] clause
                57.5.3. When true the device has an Organization
                Specific Event asserted. When false the Organization
                Specific Event is reset."
       ::= { eponDeviceEventObjectEntry 22 }

   eponDeviceOrganizationSpecificEventEnabled OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "A control to allow OrganizationSpecificEvent event to be
                used. When the value is true the event is sampled. When
                the value is false the event is not sampled.
                Writing can be done all the time."
       DEFVAL { false }
       ::= { eponDeviceEventObjectEntry 23 }

   eponDeviceEventControl OBJECT-TYPE
       SYNTAX INTEGER {
               none(1),
               resetLog(2),
               useDefaultReporting(3)
       }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Indicates and controls the resetting of the Event log.
                Setting this object to none(1) has no action resetLog(2)
                empties the event log. All data is deleted. Setting it
                to useDefaultReporting(3) returns all event priorities
                to their factory-default reporting. Reading this object
                always returns useDefaultReporting(3)."
       DEFVAL { 3 }
       ::= { eponDeviceEventObjectEntry 24 }





Khermosh                 Expires March 21, 2005                [Page 64]

Internet-Draft          Managed Objects of EPON           September 2004


   -- Events Log Table

   eponDeviceEventsLogTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF EponDeviceEventsLogEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A table of objects provides a log of notification based
                on the event as pointed to by entries in those tables.
                The intent is a MAC level event log (set of events to
                when they happened).
                This attribute is relevant for an OLT and an ONU."
       ::= { eponDeviceEventObjects 2 }

   eponDeviceEventsLogEntry OBJECT-TYPE
       SYNTAX      EponDeviceEventsLogEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A group of Events. Applications create and delete
                entries using eponDeviceEventsEntryStatus. When adding
                objects to a notification they are added in the lexical
                order of their index in this table."
       INDEX       {eponDeviceEventsLogName, eponDeviceEventsLogIndex }
       ::= { eponDeviceEventsLogTable 1 }

   EponDeviceEventsLogEntry ::=
       SEQUENCE {
               eponDeviceEventsLogName            SnmpAdminString,
               eponDeviceEventsLogIndex           Unsigned32,
               eponDeviceEventsLogID              OBJECT IDENTIFIER,
               eponDeviceEventsLogFirstTime       DateAndTime,
               eponDeviceEventsLogLastTime        DateAndTime,
               eponDeviceEventsLogCounts          Counter32,
               eponDeviceEventsLogType            INTEGER,
               eponDeviceEventsLogEntryStatus     RowStatus
       }

   eponDeviceEventsLogName OBJECT-TYPE
       SYNTAX      SnmpAdminString (SIZE (1..32))
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A locally-unique, administratively assigned name for a
                group of Events."
       ::= { eponDeviceEventsLogEntry 1 }

   eponDeviceEventsLogIndex OBJECT-TYPE



Khermosh                 Expires March 21, 2005                [Page 65]

Internet-Draft          Managed Objects of EPON           September 2004


       SYNTAX      Unsigned32 (1..4294967295)
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "An arbitrary integer for the purpose of identifying
                individual Events within a eponDeviceEventsLogName
                group. Events within a group are placed in the
                notification in the numerical order of this index."
       ::= { eponDeviceEventsLogEntry 2 }

   eponDeviceEventsLogID OBJECT-TYPE
       SYNTAX      OBJECT IDENTIFIER
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The object identifier of a MIB module object to add to a
                Notification that results from the event.
                Writing can be done all the time."
       DEFVAL { zeroDotZero }
       ::= { eponDeviceEventsLogEntry 3 }

   eponDeviceEventsLogFirstTime OBJECT-TYPE
       SYNTAX      DateAndTime
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The time that an entry was created."
       ::= { eponDeviceEventsLogEntry 4 }

   eponDeviceEventsLogLastTime OBJECT-TYPE
       SYNTAX      DateAndTime
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "If multiple events are reported via the same entry, the
                time that the last event for this entry occurred,
                otherwise this should have the same value as
                eponDeviceEventsLogFirstTime."
       ::= { eponDeviceEventsLogEntry 5 }

   eponDeviceEventsLogCounts OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of consecutive event instances reported by
                this entry. This starts at 1 with the creation of this
                row and increments by 1 for each subsequent duplicate



Khermosh                 Expires March 21, 2005                [Page 66]

Internet-Draft          Managed Objects of EPON           September 2004


                event."
       ::= { eponDeviceEventsLogEntry 6 }

   eponDeviceEventsLogType OBJECT-TYPE
       SYNTAX  INTEGER {
               eponDeviceDyingGaspAlarmState (1),
               eponDeviceCriticalEventState (2),
               eponDeviceLocalLinkFaultAlarmState (3),
               eponDeviceTemperatureEventIndicationState (4),
               eponDevicePowerVoltageEventIndicationState (5),
               eponDeviceGlobalEventState (6),
               eponDeviceErroredSymbolPeriodEventState (7),
               eponDeviceErroredFrameEventState (8),
               eponDeviceErroredFramePeriodEventState (9),
               eponDeviceErroredFrameSecondsSummaryEventState (10),
               eponDeviceOrganizationSpecificEventState (11)
       }
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
               "A list of types for Events. Events are ordered according
                to their significance where 1 is the highest severity.
                eponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp
                 Alarm State,
                eponDeviceCriticalEventState(2) indicates a Critical
                 Event State,
                eponDeviceLocalLinkFaultAlarmState(3) indicates a Local
                 Link Fault Alarm State,
                eponDeviceTemperatureEventIndicationState(4) indicates a
                 Temperature Event Indication State,
                eponDevicePowerVoltageEventIndicationState(5) indicates
                 a Power Voltage Event Indication State,
                eponDeviceGlobalEventState(6) indicates a Global Event
                 State,
                eponDeviceErroredSymbolPeriodEventState(7) indicates an
                 Errored Symbol Period Event State,
                eponDeviceErroredFrameEventState(8) indicates an Errored
                 Frame Event State,
                eponDeviceErroredFramePeriodEventState(9) indicates an
                 Errored Frame Period Event State,
                eponDeviceErroredFrameSecondsSummaryEventState(10)
                 indicates an Errored Frame Seconds Summary Event State,
                eponDeviceOrganizationSpecificEventState(11) indicates
                 an Organization Specific Event State. "
       ::= { eponDeviceEventsLogEntry 7 }


   eponDeviceEventsLogEntryStatus OBJECT-TYPE



Khermosh                 Expires March 21, 2005                [Page 67]

Internet-Draft          Managed Objects of EPON           September 2004


       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The control that allows creation and deletion of
                entries. Once made active an entry MAY not be modified
                except to delete it."
       ::= { eponDeviceEventsLogEntry 8 }




        -- Conformance Statements

   -- Conformance Groups

   eponDeviceGroups OBJECT IDENTIFIER ::={ eponDeviceConformance 1}

   eponDeviceGroupControl OBJECT-GROUP
       OBJECTS {
               eponDeviceObjectReset,
               eponDeviceObjectModes,
               eponDeviceObjectFecEnabled,
               eponDeviceObjectOamMode,
               eponDeviceObjectDeviceReadyMode,
               eponDeviceObjectPowerDown,
               eponDeviceObjectNumberOfLLIDs,
               eponDeviceObjectReportThreshold,
               eponDeviceRemoteMACAddressLLIDControl
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of eponDevice control
                definition."
       ::= { eponDeviceGroups 1 }


   eponDeviceGroupRMadLTable OBJECT-GROUP
       OBJECTS {
               eponDeviceRMadlLLID,
               eponDeviceRMadlLogID,
               eponDeviceRMadlRemoteAddress,
               eponDeviceRMadlType,
               eponDeviceRMadlAction,
               eponDeviceRMadlEntryStatus
       }
       STATUS  current
       DESCRIPTION



Khermosh                 Expires March 21, 2005                [Page 68]

Internet-Draft          Managed Objects of EPON           September 2004


               "A collection of objects of eponDevice remote Mac address
                to LLID table."
       ::= { eponDeviceGroups 2 }


   eponDeviceGroupStat OBJECT-GROUP
       OBJECTS {
               eponDeviceStatTxFramesQueue0,
               eponDeviceStatTxFramesQueue1,
               eponDeviceStatTxFramesQueue2,
               eponDeviceStatTxFramesQueue3,
               eponDeviceStatTxFramesQueue4,
               eponDeviceStatTxFramesQueue5,
               eponDeviceStatTxFramesQueue6,
               eponDeviceStatTxFramesQueue7,
               eponDeviceStatRxFramesQueue0,
               eponDeviceStatRxFramesQueue1,
               eponDeviceStatRxFramesQueue2,
               eponDeviceStatRxFramesQueue3,
               eponDeviceStatRxFramesQueue4,
               eponDeviceStatRxFramesQueue5,
               eponDeviceStatRxFramesQueue6,
               eponDeviceStatRxFramesQueue7,
               eponDeviceStatDroppedFramesQueue0,
               eponDeviceStatDroppedFramesQueue1,
               eponDeviceStatDroppedFramesQueue2,
               eponDeviceStatDroppedFramesQueue3,
               eponDeviceStatDroppedFramesQueue4,
               eponDeviceStatDroppedFramesQueue5,
               eponDeviceStatDroppedFramesQueue6,
               eponDeviceStatDroppedFramesQueue7
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects of EPON device Statistics"
       ::= { eponDeviceGroups 3 }



   eponDeviceGroupEvent OBJECT-GROUP
       OBJECTS {
               eponDeviceSampleMinimum,
               eponDeviceDyingGaspAlarmState,
               eponDeviceDyingGaspAlarmEnabled,
               eponDeviceCriticalEventState,
               eponDeviceCriticalEventEnabled,
               eponDeviceLocalLinkFaultAlarmState,
               eponDeviceLocalLinkFaultAlarmEnabled,



Khermosh                 Expires March 21, 2005                [Page 69]

Internet-Draft          Managed Objects of EPON           September 2004


               eponDeviceTemperatureEventIndicationState,
               eponDeviceTemperatureEventIndicationEnabled,
               eponDevicePowerVoltageEventIndicationState,
               eponDevicePowerVoltageEventIndicationEnabled,
               eponDeviceGlobalEventState,
               eponDeviceGlobalEventEnabled,
               eponDeviceErroredSymbolPeriodEventState,
               eponDeviceErroredSymbolPeriodEventEnabled,
               eponDeviceErroredFrameEventState,
               eponDeviceErroredFrameEventEnabled,
               eponDeviceErroredFramePeriodEventState ,
               eponDeviceErroredFramePeriodEventEnabled  ,
               eponDeviceErroredFrameSecondsSummaryEventState ,
               eponDeviceErroredFrameSecondsSummaryEventEnabled,
               eponDeviceOrganizationSpecificEventState  ,
               eponDeviceOrganizationSpecificEventEnabled,
               eponDeviceEventControl
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects for EPON device Events"
       ::= { eponDeviceGroups 4 }

   eponDeviceGroupEventLog OBJECT-GROUP
       OBJECTS {
               eponDeviceEventsLogID,
               eponDeviceEventsLogFirstTime,
               eponDeviceEventsLogLastTime,
               eponDeviceEventsLogCounts,
               eponDeviceEventsLogType,
               eponDeviceEventsLogEntryStatus
       }
       STATUS  current
       DESCRIPTION
               "A collection of objects for EPON device Events log"
       ::= { eponDeviceGroups 5 }


   -- Compliance

   eponDeviceCompliances OBJECT IDENTIFIER ::= {eponDeviceConformance 2}

   eponDeviceCompliance MODULE-COMPLIANCE
       STATUS      current
       DESCRIPTION "The compliance statement for EPON Devices."
       MODULE  -- this module
       MANDATORY-GROUPS { eponDeviceGroupControl }




Khermosh                 Expires March 21, 2005                [Page 70]

Internet-Draft          Managed Objects of EPON           September 2004


       GROUP       eponDeviceGroupRMadLTable
       DESCRIPTION " This group is mandatory for all
                              OLT EPON devices supporting LLID-MAC
                              address table."

       GROUP       eponDeviceGroupStat
       DESCRIPTION "This group is mandatory for all EPON devices
                    supporting interfaces for Statistics collection."

       GROUP       eponDeviceGroupEvent
       DESCRIPTION "This group is mandatory for all EPON devices
                    supporting interfaces for event collection."

       GROUP       eponDeviceGroupEventLog
       DESCRIPTION "This group is mandatory for all EPON devices
                    supporting interfaces for event log collection."

       ::= { eponDeviceCompliances 1}



   END





























Khermosh                 Expires March 21, 2005                [Page 71]

Internet-Draft          Managed Objects of EPON           September 2004


10.  Security Considerations

   There are number of managed objects defined in this MIB module that
   have a MAX-ACCESS clause of read-write or read-create.  Writing to
   these objects can have a potentially disruptive effects on network
   operation: Including:

   Changing dot3MpcpMode mode (Writing can be done during initialization
   only when dot3MpcpOperStatus indicates Flase)

   Changing dot3MpcpAdminState state (Writing can be done all the time)

   Changing eponDeviceObjectReportThreshold (Writing can be done all the
   time)

   Changing dot3EponMauFecMode mode (Writing can be done all the time)

   Changing eponDeviceObjectReset mode (Writing can be done all the
   time)

   Changing eponDeviceObjectFecEnabled mode (Writing can be done all the
   time)

   Changing eponDeviceObjectOamMode mode (Writing can be done during
   initialization, eponDeviceObjectDeviceReadyMode is in notReady(1) or
   inProcess(2))

   Changing eponDeviceObjectDeviceReadyMode (Writing can be done all the
   time)

   Changing eponDeviceObjectPowerDown (Writing can be done all the time)

   Changing eponDeviceObjectReportThreshold (Writing can be done all the
   time)

   Changing eponDeviceRemoteMACAddressLLIDControl (Writing can be done
   all the time)

   Changing eponDeviceRMadlLogID (Writing can be done all the time)

   Changing eponDeviceRMadlLLID (Writing can be done all the time)

   Changing eponDeviceRMadlRemoteAddress (Writing can be done all the
   time)

   Changing eponDeviceRMadlType (Writing can be done all the time)

   Changing eponDeviceRMadlAction (Writing can be done all the time)



Khermosh                 Expires March 21, 2005                [Page 72]

Internet-Draft          Managed Objects of EPON           September 2004


   Changing eponDeviceRMadlEntryStatus (Writing can be done all the
   time)

   Changing eponDeviceSampleMinimum(Writing can be done all the time)

   Changing eponDeviceDyingGaspAlarmEnabled (Writing can be done all the
   time)

   Changing eponDeviceCriticalEventEnabled (Writing can be done all the
   time)

   Changing eponDeviceLocalLinkFaultAlarmEnabled (Writing can be done
   all the time)

   Changing eponDeviceTemperatureEventIndicationEnabled (Writing can be
   done all the time)

   Changing eponDevicePowerVoltageEventIndicationEnabled (Writing can be
   done all the time)

   Changing eponDeviceGlobalEventEnabled (Writing can be done all the
   time)

   Changing eponDeviceErroredSymbolPeriodEventEnabled (Writing can be
   done all the time)

   Changing eponDeviceErroredFrameEventEnabled (Writing can be done all
   the time)

   Changing eponDeviceErroredFramePeriodEventEnabled (Writing can be
   done all the time)

   Changing eponDeviceErroredFrameSecondsSummaryEventEnabled (Writing
   can be done all the time)

   Changing eponDeviceOrganizationSpecificEventEnabled (Writing can be
   done all the time)

   Changing eponDeviceEventControl (Writing can be done all the time)

   Changing eponDeviceEventsLogID (Writing can be done all the time)

   Changing eponDeviceEventsLogEntryStatus (Writing can be done all the
   time)


   The user of this MIB module must therefore be aware that support for
   SET operations in a non-secure environment without proper protection



Khermosh                 Expires March 21, 2005                [Page 73]

Internet-Draft          Managed Objects of EPON           September 2004


   can have a negative effect on network operations.

   The readable objects in this MIB module (i.e., those with MAX-ACCESS
   other than not-accessible) may be considered sensitive in some
   environments since, collectively, they provide information about the
   performance of network interfaces and can reveal some aspects of
   their configuration.  In such environments it is important to control
   even GET and NOTIFY access to these objects and possibly even to
   encrypt their values when sending them over the network via SNMP.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.























Khermosh                 Expires March 21, 2005                [Page 74]

Internet-Draft          Managed Objects of EPON           September 2004


11.  References

11.1  Normative References

   [802.3]    IEEE, "Institute of Electrical and Electronic Engineers,
              IEEE Std 802.3-2002, "IEEE Standard for Carrier Sense
              Multiple Access with Collision Detection (CSMA/CD) Access
              Method and Physical Layer Specifications", December 2002.

   [802.3ah]  IEEE, "Draft amendment to - Information technology -
              Telecommunications and information exchange between
              systems - Local and metropolitan area networks - Specific
              requirements - Part 3: Carrier sense multiple access with
              collision detection (CSMA/CD) access method and physical
              layer specifications - Media Access Control Parameters,
              Physical Layers and Management Parameters for subscriber
              access networks", IEEE Draft P802.3ah/D3.3, April 2004.

   [I-D.ietf-hubmib-efm-mib]
              Squire, M., "Ethernet in the First Mile (EFM) Common MIB",
              draft-squire-hubmib-efm-mib-00 (work in progress), October
              2003.

   [RFC1493]  Decker, E., Langille, P., Rijsinghani, A. and K.
              McCloghrie, "Definitions of Managed Objects for Bridges",
              RFC 1493, July 1993.

   [RFC1525]  Decker, E., McCloghrie, K., Langille, P. and A.
              Rijsinghani, "Definitions of Managed Objects for Source
              Routing Bridges", RFC 1525, September 1993.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              McCloghrie, K., Rose, M. and S. Waldbusser, "Structure of
              Management Information Version 2 (SMIv2)", STD 58, RFC
              2578, April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              McCloghrie, K., Rose, M. and S. Waldbusser, "Textual
              Conventions for SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D. and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2669]  St. Johns, M., "DOCSIS Cable Device MIB Cable Device
              Management Information Base for DOCSIS compliant Cable
              Modems and Cable Modem Termination Systems", RFC 2669,
              August 1999.



Khermosh                 Expires March 21, 2005                [Page 75]

Internet-Draft          Managed Objects of EPON           September 2004


   [RFC2737]  McCloghrie, K. and A. Bierman, "Entity MIB (Version 2)",
              RFC 2737, December 1999.

   [RFC2981]  Kavasseri, R., "Event MIB", RFC 2981, October 2000.

   [RFC3591]  Lam, H-K., Stewart, M. and A. Huynh, "Definitions of
              Managed Objects for the Optical Interface Type", RFC 3591,
              September 2003.

   [RFC3635]  Flick, J., "Definitions of Managed Objects for the
              Ethernet-like Interface Types", RFC 3635, September 2003.

   [RFC3636]  Flick, J., "Definitions of Managed Objects for IEEE 802.3
              Medium Attachment Units (MAUs)", RFC 3636, September 2003.

11.2  Informative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2863]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group
              MIB", RFC 2863, June 2000.

   [RFC2864]  McCloghrie, K. and G. Hanson, "The Inverted Stack Table
              Extension to the Interfaces Group MIB", RFC 2864, June
              2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D. and B. Stewart,
              "Introduction and Applicability Statements for
              Internet-Standard Management Framework", RFC 3410,
              December 2002.


Author's Address

   Lior Khermosh
   Passave Technologies
   Ackerstein Towers, Tower A, 6th floor,
   9 Hamenofim St.,
   Hertzliya Pituach,  46725
   ISRAEL

   Phone: +972-9-9717600 Ext: 7181
   Fax:   +972-9-9540245
   EMail: lior.khermosh@passave.com






Khermosh                 Expires March 21, 2005                [Page 76]

Internet-Draft          Managed Objects of EPON           September 2004


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

   The IETF has been notified of intellectual property rights claimed in
   regard to some or all of the specification contained in this
   document.  For more information consult the online list of claimed
   rights.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.





Khermosh                 Expires March 21, 2005                [Page 77]

Internet-Draft          Managed Objects of EPON           September 2004


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.















































Khermosh                 Expires March 21, 2005                [Page 78]


Html markup produced by rfcmarkup 1.109, available from https://tools.ietf.org/tools/rfcmarkup/