[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 RFC 4546

    IPCDN Working Group                                       D. Raftus
    Internet Draft                                  Terayon Canada Ltd.
    Document: draft-ietf-ipcdn-docs-rfmibv2-11      E. Cardona (Editor)
                                                              CableLabs


                                                              July 2004
    Expires:January 2005
    Obsoletes: RFC 2670




       Radio Frequency (RF) Interface Management Information Base
                   for DOCSIS 2.0 compliant RF interfaces


Status of this Memo


   By submitting this Internet-Draft, I certify that any applicable
   patent or other IPR claims of which I am aware have been disclosed,
   and any of which I become aware will be disclosed, in accordance with
   RFC 3668.


   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.


   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other
   documents at any time.  It is inappropriate to use
   Internet-Drafts as reference material or to cite them other than
   as "work in progress."


   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt


   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


Copyright Notice


   Copyright (C) The Internet Society (2004).  All Rights Reserved.


Abstract


  This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it defines a set of managed objects for SNMP-based
   management of the Radio Frequency (RF) interfaces for systems
   compliant with the Data Over Cable Service Interface Specifications
   (DOCSIS).


   This document revises RFC 2670.  Please see section 10 for a



Raftus/Cardona                                            [Page 1]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   description of the changes from RFC 2670.


   This memo is a product of the IPCDN working group within the
   Internet Engineering Task Force.  Comments are solicited and should
   be addressed to the working group's mailing list at ipcdn@ietf.org
   and/or the authors.


Conventions used in this document


   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in
   this document are to be interpreted as described in BCP 14,
   RFC 2119 [RFC2119].



Table of Contents


   1 The Internet-Standard Management Framework .................... 2
   2 Glossary ...................................................... 3
   3 Overview ...................................................... 6
   3.1 Structure of the MIB ........................................ 6
   3.1.1 docsIfBaseObjects ......................................... 6
   3.1.2 docsIfCmObjects ........................................... 6
   3.1.3 docsIfCmtsObjects ......................................... 7
   3.2 Relationship to the Interfaces MIB .......................... 7
   3.2.1 Layering Model ............................................ 8
   3.2.2 Virtual Circuits .......................................... 9
   3.2.3 ifTestTable ............................................... 9
   3.2.4 ifRcvAddressTable ......................................... 9
   3.2.5 ifEntry ................................................... 9
   4 Definitions .................................................. 20
   5 Acknowledgments ............................................. 122
   6 Revision History ............................................ 123
   7 Normative References ........................................ 123
   8 Informative References ...................................... 124
   9 Security Considerations ..................................... 125
   10 Changes from RFC 2670 ...................................... 127
   11 Management Interoperability of DOCSIS 1.0, 1.1 and 2.0...... 128
   12 Intellectual Property .......................................129
   13 Author's Address ........................................... 129
   14 Disclaimer of Validity ......................................130
   15 Copyright Notice.............................................130





1. The Internet-Standard Management Framework


   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7




Raftus/Cardona               Expires January 2005             [Page 2]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   of RFC 3410 [RFC3410].


   Managed objects are accessed via a virtual information store,
   termed the Management Information Base or MIB.  MIB objects are
   generally accessed through the Simple Network Management Protocol
   (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a
   MIB module that is compliant to the SMIv2, which is described in
   STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58,
   RFC 2580 [RFC2580].



2.  Glossary


   The terms in this document are derived either from normal cable
   system usage, or from the documents associated with the Data Over
   Cable Service Interface Specification process.


2.1.  Baseline Privacy


   Security interface specification designed for DOCSIS compliant
   cable data systems that ensures device authentication data
   confidentiality in the CATV plant. See [BPI] and [BPIPLUS].


2.2.  CATV


   Originally "Community Antenna Television", now used to refer to any
   cable or hybrid fiber and cable system used to deliver video signals
   to a community.


2.3.  Channel


   A specific frequency allocation with an RF medium, specified by
   channel width in Hertz (cycles per second) and by center frequency.
   Within the US Cable Systems, upstream channels are generally
   allocated from the 5-42MHz range while down stream channels are
   generally allocated from the 50-750MHz range depending on the
   capabilities of the given system.  The typical broadcast channel
   width in the US is 6MHz.  Upstream channel widths for DOCSIS vary.


   For European cable systems, upstream channels vary by country.  The
   upper edge of upstream channel allocations vary between 25 MHz to 65
   MHz, and the lower edge of downstream channel allocations vary
   between 47 MHz and 87.5 MHz.  The typical broadcast channel width in
   Europe is 8MHz.  The actual parameters are of concern to systems
   deploying Euro-DOCSIS technology.


2.4.  CM   Cable Modem.





Raftus/Cardona               Expires January 2005             [Page 3]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   A CM acts as a "slave" station in a DOCSIS compliant cable data
   system.


2.5.  CMTS   Cable Modem Termination System.


   A generic term covering a cable bridge or cable router in a
   head-end.  A CMTS acts as the master station in a DOCSIS compliant
   cable data system.  It is the only station that transmits
   downstream, and it controls the scheduling of upstream
   transmissions by its associated CMs.


2.6.  Codeword


   A characteristic of the Forward Error Correction scheme used
   above the RF media layer.


   See "Data-Over-Cable Service Interface Specifications: Radio
   Frequency Interface Specification SP-RFIv2.0-I05-040407"


2.7.  Data Packet
   The payload portion of the MAC Packet.


2.8.  dBmV


   A measure of RF signal voltage amplitude, whose power level is
   determined by the characteristic impedance.  A zero dB signal power
   is equivalent to 48.75 dBmV signal amplitude in a 75 Ohm system.


2.9.   DOCSIS


   "Data Over Cable Service Interface Specification".  A term
   referring to the ITU-T J112 Annex B standard for cable modem
   systems [ITU-T J112].


2.9.1. DOCSIS 1.0


   Cable modem systems CM/CMTS compliant to requirements in [RFI1.0].
   A common reference to DOCSIS 1.0 in this document is the upstream
   channel queuing mechanism known as Class of Service (COS).


2.9.2  DOCSIS 1.1


   Cable modem systems CM/CMTS compliant to requirements in
   [ITU-T J112].
   DOCSIS 1.1 references in this document are in part associated with
   the upstream and downstream Quality of Service (QOS).
   The term DOCSIS 1.x is used in this document to refer both
   DOCSIS 1.0 and DOCSIS 1.1.


2.9.3.  DOCSIS 2.0




Raftus/Cardona               Expires January 2005             [Page 4]

Internet Draft             DOCSIS RF Interface MIB          July 2004




   Cable modem systems CM/CMTS compliant to requirements in
   [ITU-T-J122].


2.10.  Downstream


   The direction from the head-end towards the subscriber.


2.11.  Euro-DOCSIS


   Cable modem systems CM/CMTS conforming to the European spectrum
   Lineup and compliant to requirements of Annex F in [ITU-T-J122]


2.12.  Head-end


   The origination point in most cable systems of the subscriber video
   signals.


2.13.  MAC Packet


   A DOCSIS PDU.


2.14.  MCNS


   "Multimedia Cable Network System".  Generally replaced in usage by
   DOCSIS.


2.15.  Mini-slot


   In general, an interval of time which is allocated by the
   CMTS to a given CM for that CM to transmit in an upstream direction.
   See [ITU-T-J122]


2.16.  QPSK   Quadrature Phase Shift Keying.


   A particular modulation scheme on an RF medium.  See [Proakis00].


2.17.  QAM   Quadrature Amplitude Modulation.


   A particular modulation scheme on RF medium.  Usually expressed
   with a number indicating the size of the modulation constellation
   (e.g. 16 QAM).  See [Proakis00].


2.18.  RF


   Radio Frequency.


2.19.  Symbol-times


   A characteristic of the RF modulation scheme.




Raftus/Cardona               Expires January 2005             [Page 5]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   See  [ITU-T-J122].


2.20.  Upstream


   The direction from the subscriber towards the head-end.




3.  Overview


   This MIB module provides a set of objects required for the
   management of MCNS/DOCSIS compliant Cable Modem (CM) and Cable Modem
   Termination System (CMTS) RF interfaces.  The specification is
   derived in part from the parameters and protocols described in
   [ITU-T-J122].


3.1.  Structure of the MIB


   This MIB module is structured as three groups:


   o    Management information pertinent to both Cable Modems (CM) and
        Cable Modem Termination Systems (CMTS) (docsIfBaseObjects).
   o    Management information pertinent to Cable Modems only
        (docsIfCmObjects).
   o    Management information pertinent to Cable Modem Termination
        Systems only (docsIfCmtsObjects).


   Tables within each of these groups group objects functionally - e.g.
   Quality of Service, Channel characteristics, MAC layer management,
   etc.  Rows created automatically (e.g. by the device according to
   the hardware configuration) may and generally will have a mixture of
   configuration and status objects within them.  Rows that are meant
   to be created by the management station are generally restricted to
   configuration (read-create) objects.


3.1.1.  docsIfBaseObjects


   docsIfDownstreamChannelTable - This table describes the existing
   downstream channels for a CMTS and the received downstream channel
   for a CM.


   docsIfUpstreamChannelTable - This table describes the existing
   upstream channels for a CMTS and the current upstream transmission
   channel for a CM.


   docsIfQosProfileTable - This table describes the valid Quality of
   Service profiles for the cable data system.


   docsIfSignalQualityTable - This table is used to monitor RF signal
   quality characteristics of received signals.




Raftus/Cardona               Expires January 2005             [Page 6]

Internet Draft             DOCSIS RF Interface MIB          July 2004




   docsIfDocsisBaseCapability  - This object is used to indicate the
   highest level of DOCSIS version a cable device can support.


3.1.2.  docsIfCmObjects


   docsIfCmMacTable - This table is used to monitor the DOCSIS MAC
   interface and can be considered an extension to the ifEntry.


   docsIfCmStatusTable - This table maintains a number of status
   objects and counters for cable modems.  There is a comparable table
   at the CMTS, docsIfCmtsCmStatusTable, which maintains similar
   counters from the CMTS point of view.


   docsIfCmServiceTable - This table describes the upstream service
   queues available at this CM.  There is a comparable table at the
   CMTS, docsIfCmtsServiceEntry, which describes the service queues
   from the point of view of the CMTS.


3.1.3.  docsIfCmtsObjects


   docsIfCmtsMacTable - Describes the attributes of each CMTS MAC
   interface.


   docsIfCmtsStatusTable - This table provides a set of aggregated
   counters which roll-up values and events that occur on the
   underlying sub-interfaces.


   docsIfCmtsCmStatusTable - This table is used to hold information
   about known (i.e. ranging, registered, and/or previously online)
   cable modems on the system serviced by this CMTS.


   docsIfCmtsServiceTable - This table provides access to the
   information related to upstream service queues.


   docsIfCmtsModulationTable - This table allows control over the
   modulation profiles for RF channels associated with this CMTS.


   docsIfCmtsMacToCmTable - This table allows fast access into the
   docsIfCmtsCmTable via a MAC address (of the CM) interface.


   docsIfCmtsChannelUtilizationTable - This table provides statistical
   load usage data for attached upstream and downstream physical
   channels.


   docsIfCmtsDownChannelCounterTable - This table provides statistical
   data for attached downstream channels, appropriate as input for load
   usage calculations.


   docsIfCmtsUpChannelCounterTable - This table provides statistical




Raftus/Cardona               Expires January 2005             [Page 7]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   data for attached upstream channels, appropriate as input for load
   usage calculations.


3.2.  Relationship to the Interfaces MIB module


   This section clarifies the relationship of this MIB module to the
   Interfaces MIB [RFC2863].  Several areas of correlation are
   Addressed in the following subsections.  The implementer is referred
   to the Interfaces MIB document in order to understand the general
   intent of these areas.


3.2.1.  Layering Model


   An instance of ifEntry exists for each RF Downstream interface, for
   each RF Upstream interface, for each Upstream logical Channel and
   for each RF MAC layer.
   The ifStackTable [RFC2863] MUST be implemented to identify the
   relationships among sub-interfaces.


   The following example illustrates a CMTS MAC interface with one
   downstream and two upstream interfaces.


                              | <== to network layer
        +------------------ --+-------------------------------+
        |                     RF MAC                          |
        +--+------------------+------------------------+------+
           |                  |                        |
   +-------+-----+     +------+------+          +------+------+
   | Downstream1 |     |  Upstream1  |          |  Upstream2  |
   |             |     |             |          |             |
   +-------------+     ++-----------++          ++-----------++
                        |           |            |           |
                   +----+----+ +----+----+  +----+----+ +----+----+
                   |  Ch-1   | |  Ch-2   |  |  Ch-1   | |  Ch-2   |
                   |(A/TDMA) | |(S-CDMA) |  |(A/TDMA) | |(S-CDMA) |
                   +---------+ +---------+  +---------+ +---------+


   As can be seen from this example, the RF MAC interface is layered on
   top of the downstream and upstream interfaces, and the RF Upstream
   interface is layered on top of an Upstream Logical Channels.


   In this example, the assignment of index values could be as follows:


   ifIndex       ifType                     Description


      2    docsCableMaclayer(127)           CATV MAC Layer
      3    docsCableDownstream(128)         CATV Downstream interface
      4    docsCableUpstream(129)           CATV Upstream interface
      5    docsCableUpstream(129)           CATV Upstream interface
      6    docsCableUpstreamChannel(205)    CATV Upstream Channel




Raftus/Cardona               Expires January 2005             [Page 8]

Internet Draft             DOCSIS RF Interface MIB          July 2004



      7    docsCableUpstreamChannel(205)    CATV Upstream Channel
      8    docsCableUpstreamChannel(205)    CATV Upstream Channel
      9    docsCableUpstreamChannel(205)    CATV Upstream Channel


      The corresponding ifStack entries would then be:


           | IfStackHigherLayer | ifStackLowerLayer |
           |         0          |         2         |
           |         2          |         3         |
           |         2          |         4         |
           |         2          |         5         |
           |         4          |         6         |
           |         4          |         7         |
           |         5          |         8         |
           |         5          |         9         |
           |         3          |         0         |
           |         6          |         0         |
           |         7          |         0         |
           |         8          |         0         |
           |         9          |         0         |


   The same interface model can also be used in Telephony or Telco
   Return systems.  A pure Telco Return system (Cable Modem as well as
   Cable Modem Termination System) would not have upstream, but only
   downstream cable channels.  Systems supporting both Telco Return and
   cable upstream channels can use the above model without
   modification.


   Telco Return Upstream channel(s) management is outside the scope of
   this document.


3.2.2.  Virtual Circuits


   This medium does not support virtual circuits and this area is not
   applicable to this MIB module.


3.2.3.  ifTestTable


   The ifTestTable is optional for DOCSIS CM/CMTS implementations, but
   is not specifically influenced by the RF MIB.


3.2.4.  ifRcvAddressTable


   The ifRcvAddressTable is optional for DOCSIS CM/CMTS
   implementations, but is not specifically influenced by the RF MIB.


3.2.5.  ifEntry


   This section documents only the differences from the requirements
   specified in the Interfaces MIB module.  See that MIB module for




Raftus/Cardona               Expires January 2005             [Page 9]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   columns omitted from the descriptions below.


3.2.5.1.  ifEntry for Downstream interfaces


   The ifEntry for Downstream interfaces supports the
   ifGeneralInformationGroup and the ifPacketGroup of the Interfaces
   MIB module.  This is an output only interface at the CMTS and all
   input status counters - ifIn* - will return zero.  This is an input
   only interface at the CM and all output status counters - ifOut* -
   will return zero.


3.2.5.1.1.  ifEntry for Downstream interfaces in Cable Modem
   Termination Systems


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable Downstream interface is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableDownstream(128)
                     See [IANA].


   ifSpeed           Return the speed of this downstream channel.
                     The returned value is the raw bandwidth in bits/s
                     of this interface.  This is the symbol rate
                     multiplied with the number of bits per symbol.


   ifHighSpeed       Return the speed of this downstream channel.
                     The returned value is the raw bandwidth in
                     megabits/s of this interface.  This is the symbol
                     rate multiplied with the number of bits per
                     symbol.


   ifPhysAddress     Return an empty string.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of this interface.


   ifMtu             The size of the largest frame which can be
                     sent on this interface, specified in octets.
                     The value includes the length of the MAC header.


   ifInOctets        Return zero.
   ifHCInOctets


   ifInUcastPkts     Return zero.
   ifHCInUcastPkts


   ifInMulticastPkts Return zero.




Raftus/Cardona               Expires January 2005            [Page 10]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   ifHCInMulticastPkts


   ifInBroadcastPkts Return zero.
   ifHCInBroadcastPkts


   ifInDiscards      Return zero.


   ifInErrors        Return zero.


   ifInUnknownProtos Return zero.


   ifOutOctets       The total number of octets transmitted on this
   ifHCOutOctets     interface.  This includes MAC packets as well as
                     data packets, and includes the length of the MAC
                     header.


   ifOutUcastPkts    The number of Unicast packets transmitted on this
   ifHCOutUcastPkts  interface.  This includes MAC packets as well as
                     data packets.


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return the number of Multicast packets transmitted
                     on this interface.
                     This includes MAC packets as well as data packets.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return the number of broadcast packets transmitted
                     on this interface.
                     This includes MAC packets as well as data packets.


   ifOutDiscards     The total number of outbound packets which
                     were discarded.  Possible reasons are:
                     buffer shortage.


   ifOutErrors       The number of packets which could not be
                     transmitted due to errors.


   ifPromiscuousMode Return false.


3.2.5.1.2.  ifEntry for Downstream interfaces in Cable Modems


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable Downstream interface is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableDownstream(128).
                     See [IANA].




Raftus/Cardona               Expires January 2005            [Page 11]

Internet Draft             DOCSIS RF Interface MIB          July 2004




   ifSpeed           Return the speed of this downstream channel.
                     The returned value the raw bandwidth in bits/s
                     of this interface.  This is the symbol rate
                     multiplied with the number of bits per symbol.


   ifHighSpeed       Return the speed of this downstream channel.
                     The returned value the raw bandwidth in megabits/s
                     of this interface.  This is the symbol rate
                     multiplied with the number of bits per symbol.


   ifPhysAddress     Return an empty string.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of this interface.


   ifMtu             The size of the largest frame which can be
                     received from this interface, specified in octets.
                     The value includes the length of the MAC header.


   ifInOctets        The total number of octets received on this
   ifHCInOctets      interface.  This includes data packets as well as
                     MAC packets, and includes the length of the
                     MAC header.


   ifInUcastPkts     The number of Unicast packets received on this
   ifHCInUcastPkts   interface.  This includes data packets as well as
                     MAC packets.


   ifInMulticastPkts
   ifHCInMulticastPkts
                     Return the number of Multicast packets received
                     on this interface.  This includes data packets as
                     well as MAC packets.


   ifInBroadcastPkts
   ifHCInBroadcastPkts
                     Return the number of Broadcast packets received
                     on this interface.  This includes data packets
                     as well as MAC packets.


   ifInDiscards      The total number of received packets that have
                     been discarded.
                     The possible reasons are: buffer shortage.


   ifInErrors        The number of inbound packets that contained
                     errors preventing them from being deliverable
                     to higher layers.
                     Possible reasons are: MAC FCS error.




Raftus/Cardona               Expires January 2005            [Page 12]

Internet Draft             DOCSIS RF Interface MIB          July 2004




   ifInUnknownProtos The number of frames with an unknown packet type.
                     These are MAC frames with an unknown packet type.


   ifOutOctets       Return zero.
   ifHCOutOctets


   ifOutUcastPkts    Return zero.
   ifHCOutUcastPkts


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return zero.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return zero.


   ifOutDiscards     Return zero.


   ifOutErrors       Return zero.


   ifPromiscuousMode Refer to the Interfaces MIB.


3.2.5.2.  ifEntry for Upstream interfaces


   Each supported interface of the type docsCableUpstream(129) must
   have a corresponding ifEntry.
   The ifEntry for Upstream interfaces supports the
   ifGeneralInformationGroup and the ifPacketGroup of the Interfaces
   MIB.  This is an input only interface at the CMTS and all output
   status counters - ifOut* - will return zero.  This is an output only
   interface at the CM and all input status counters - ifIn* - will
   return zero.


3.2.5.2.1.  ifEntry for Upstream interfaces in Cable Modem Termination
            Systems


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable Upstream interface is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableUpstream (129).
                     See [IANA].


   ifSpeed           Return the maximum channel throughput (not payload
                     throughput) supported by the interface.
                     The maximum throughput is calculated for the case
                     where upstream channels are configured to maximize




Raftus/Cardona               Expires January 2005            [Page 13]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                     interface throughput.


   ifHighSpeed       Return the maximum channel throughput (not payload
                     throughput) supported by the interface.
                     The maximum throughput is calculated for the case
                     where upstream channels are configured to maximize
                     interface throughput.  Units for this object are
                     (1/1 000 000) * IfSpeed.


   ifPhysAddress     Return an empty string.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of this interface.
                     This reflects the total status of all the channels
                     under this interface.  So if at least one channel
                     has a physical connection this interface has
                     connection.


   ifMtu             The size of the largest frame which can be
                     transmitted on this interface, specified in
                     octets.  The value includes the length of the MAC
                     header.  This is the maximum of all the ifMtu of
                     all the channels under this interface.


   ifInOctets
   ifHCInOctets      The total (sum) number of octets received on all
                     the Upstream channels under this
                     interface.  This includes data packets as well as
                     MAC packets, and includes the length of the
                     MAC header.


   ifInUcastPkts
   ifHCInUcastPkts   The total number of Unicast packets received on
                     all the upstream channels under this
                     interface.  This includes data packets as well as
                     MAC packets.


   ifInMulticastPkts
   ifHCInMulticastPkts
                     Return the total number of Multicast packets
                     received on all the Upstream channels under this
                     interface.  This includes data packets as well as
                     MAC layer packets.


   ifInBroadcastPkts
   ifHCInBroadcastPkts
                     Return the total number of Broadcast packets
                     received on all the Upstream channels under this
                     interface.  This includes data packets as well as




Raftus/Cardona               Expires January 2005            [Page 14]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                     MAC packets.


   ifInDiscards      The total number of received packets, which have
                     been discarded on all the Upstream channels under
                     this interface.
                     The possible reasons are: buffer shortage.


   ifInErrors        The total number of inbound packets that contained
                     errors preventing them from being deliverable
                     to higher layers.
                     Possible reasons are: MAC FCS error.


   ifInUnknownProtos The total number of frames with an unknown packet
                     type.  These are MAC frames with an unknown packet
                     type.


   ifOutOctets       Return zero.
   ifHCOutOctets


   ifOutUcastPkts    Return zero.
   ifHCOutOctets


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return zero.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return zero.


   ifOutDiscards     Return zero.


   ifOutErrors       Return zero.


3.2.5.2.2.  ifEntry for Upstream interfaces in Cable Modems


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable Upstream interface is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableUpstream (129).
                     See [IANA].


   ifSpeed           Return the speed of this upstream interface.
                     The returned value is the raw bandwidth
                     in bits/s of this interface.


   ifHighSpeed       Return the speed of this upstream interface.
                     The returned value is the raw bandwidth




Raftus/Cardona               Expires January 2005            [Page 15]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                     in megabits/s of this interface.


   ifPhysAddress     Return an empty string.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of this interface.


   ifMtu             The size of the largest frame which can be
                     transmitted on this interface, specified in
                     octets.  The value includes the length of the MAC
                     header.


   ifInOctets        Return zero.
   ifHCInOctets


   ifInUcastPkts     Return zero.
   ifHCInUcastPkts


   ifInMulticastPkts Return zero.
   ifHCInMulticastPkts


   ifInBroadcastPkts Return zero.
   ifHCInBroadcastPkts


   ifInDiscards      Return zero.


   ifInErrors        Return zero.


   ifInUnknownProtos Return zero.


   ifOutOctets       The total number of octets transmitted on this
   ifHCOutOctets     interface.  This includes MAC packets as well as
                     data packets, and includes the length of the MAC
                     header.


   ifOutUcastPkts    The number of Unicast packets transmitted on this
   ifHCOutUcastPkts  interface.  This includes MAC packets as well as
                     data packets.


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return the number of Multicast packets transmitted
                     on this interface.
                     This includes MAC packets as well as data packets.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return the number of broadcast packets transmitted
                     on this interface.




Raftus/Cardona               Expires January 2005            [Page 16]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                     This includes MAC packets as well as data packets.


   ifOutDiscards     The total number of outbound packets which
                     were discarded.  Possible reasons are:
                     buffer shortage.


   ifOutErrors       The number of packets which could not be
                     transmitted due to errors.


   ifPromiscuousMode Return false.


3.2.5.3.  ifEntry for Upstream channels


   Each supported channel of the type docsCableUpstreamChannel(205)
   must have a corresponding ifEntry.


   The ifEntry for Upstream channels supports the
   ifGeneralInformationGroup and the ifPacketGroup of the Interfaces
   MIB.  This is an input only interface at the CMTS and all output
   status counters - ifOut* - will return zero.
   DOCSIS CMs are not required to support logical upstream channels.


3.2.5.3.1.  ifEntry for Upstream Channels in Cable Modem Termination
            Systems


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable Upstream channel is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableUpstreamChannel (205).
                     See [IANA].


   ifSpeed           Return the speed of this upstream channel.
                     The returned value is the raw bandwidth
                     in bits/s of this channel.


   ifHighSpeed       Return the speed of this upstream channel.
                     The returned value is the raw bandwidth
                     in megabits/s of this channel.


   ifPhysAddress     Return an empty string.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of this interface.


   ifMtu             The size of the largest frame which can be
                     received on this interface, specified in octets.
                     The value includes the length of the MAC header.




Raftus/Cardona               Expires January 2005            [Page 17]

Internet Draft             DOCSIS RF Interface MIB          July 2004




   ifInOctets        The total number of octets received on this
                     interface.  This includes data packets as well as
                     MAC packets, and includes the length of the
                     MAC header.


   ifInUcastPkts     The number of Unicast packets received on this
   ifHCInUcastPkts   interface.  This includes data packets as well as
                     MAC packets.


   ifInMulticastPkts
   ifHCInMulticastPkts
                     Return the number of Multicast packets received
                     on this interface.  This includes data packets as
                     well as MAC layer packets.


   ifInBroadcastPkts
   ifHCInBroadcastPkts
                     Return the number of Broadcast packets received
                     on this interface.  This includes data packets
                     as well as MAC packets.


   ifInDiscards      The total number of received packets that have
                     been discarded.
                     The possible reasons are: buffer shortage.


   ifInErrors        The number of inbound packets that contained
                     errors preventing them from being deliverable
                     to higher layers.
                     Possible reasons are: MAC FCS error.


   ifInUnknownProtos The number of frames with an unknown packet type.
                     These are MAC frames with an unknown packet type.


   ifOutOctets       Return zero.
   ifHCOutOctets


   ifOutUcastPkts    Return zero.
   ifHCOutUcastPkts


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return zero.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return zero.


   ifOutDiscards     Return zero.





Raftus/Cardona               Expires January 2005            [Page 18]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   ifOutErrors       Return zero.


3.2.5.4.  ifEntry for the MAC Layer


   The ifEntry for the MAC Layer supports the ifGeneralInformationGroup
   and the ifPacketGroup of the Interfaces MIB.  This interface
   provides an aggregate view of status for the lower level Downstream
   and Upstream interfaces.


   ifTable           Comments
   ==============    ===========================================
   ifIndex           Each RF Cable MAC layer entity is represented
                     by an ifEntry.


   ifType            The IANA value of docsCableMaclayer(127).
                     See [IANA].


   ifSpeed           Return zero.


   ifPhysAddress     Return the physical address of this interface.


   ifAdminStatus     The administrative status of this interface.


   ifOperStatus      The current operational status of the MAC
                     layer interface.


   ifHighSpeed       Return zero.


   ifMtu             Return 1500.


   ifInOctets        The total number of data octets received on this
   ifHCInOctets      interface, targeted for upper protocol layers.


   ifInUcastPkts     The number of Unicast packets received on this
   ifHCInUcastPkts   interface, targeted for upper protocol layers.


   ifInMulticastPkts
   ifHCInMulticastPkts
                     Return the number of Multicast packets received
                     on this interface, targeted for upper protocol
                     layers.


   ifInBroadcastPkts
   ifHCInBroadcastPkts
                     Return the number of Broadcast packets received
                     on this interface, targeted for upper protocol
                     layers.


   ifInDiscards      The total number of received packets that have
                     been discarded.




Raftus/Cardona               Expires January 2005            [Page 19]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                     The possible reasons are: buffer shortage.


   ifInErrors        The number of inbound packets that contained
                     errors preventing them from being deliverable
                     to higher layers.
                     Possible reasons are: data packet FCS error,
                     invalid MAC header.


   ifInUnknownProtos The number of frames with an unknown packet type.
                     This is the number of data packets targeted for
                     upper protocol layers with an unknown packet type.


   ifOutOctets       The total number of octets, received from upper
   ifHCOutOctets     protocol layers and transmitted on this interface.


   ifOutUcastPkts    The number of Unicast packets, received from upper
   ifHCOutUcastPkts  protocol layers and transmitted on this interface.


   ifOutMulticastPkts
   ifHCOutMulticastPkts
                     Return the number of Multicast packets received
                     from upper protocol layers and transmitted on this
                     interface.


   ifOutBroadcastPkts
   ifHCOutBroadcastPkts
                     Return the number of broadcast packets received
                     from upper protocol layers and transmitted on this
                     interface.


   ifOutDiscards     The total number of outbound packets which
                     were discarded.  Possible reasons are:
                     buffer shortage.


   ifOutErrors       The number of packets which could not be
                     transmitted due to errors.


   ifPromiscuousMode Refer to the Interfaces MIB.



4.  Definitions


DOCS-IF-MIB DEFINITIONS ::= BEGIN


  IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Unsigned32,
        Integer32,
        Counter32,




Raftus/Cardona               Expires January 2005            [Page 20]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        Counter64,
        TimeTicks,
        IpAddress,
        transmission
                FROM SNMPv2-SMI          -- [RFC2578]
        TEXTUAL-CONVENTION,
        MacAddress,
        RowStatus,
        TruthValue,
        TimeInterval,
        TimeStamp,
        StorageType
                FROM SNMPv2-TC           -- [RFC2579]
        OBJECT-GROUP,


        MODULE-COMPLIANCE
                FROM SNMPv2-CONF         -- [RFC2580]
        ifIndex, InterfaceIndexOrZero
                FROM IF-MIB              -- [RFC2863]
        InetAddressType,
        InetAddress
                FROM INET-ADDRESS-MIB    -- [RFC3291]
        IANAifType
                FROM IANAifType-MIB;     -- [IANA]


docsIfMib MODULE-IDENTITY
        LAST-UPDATED    "200407190000Z" -- July  19, 2004
        ORGANIZATION    "IETF IPCDN Working Group"
        CONTACT-INFO
            "        David Raftus
             Postal: Terayon Communications
                     340 Terry Fox Drive, Suite 202
                     Ottawa Ontario
                     Canada
             Phone:  +1 613 592 1052 ext.222
             E-mail: david.raftus@terayon.com


                     Eduardo Cardona
                     Postal:
                     Cable Television Laboratories, Inc.
                     858 Coal Creek Circle
                     Louisville, CO 80027-9750
                     U.S.A.
                     Tel:    +1 303 661 9100
                     Fax:    +1 303 661 9199
                     E-mail: e.cardona@cablelabs.com;mibs@cablelabs.com


             IETF IPCDN Working Group
             General Discussion: ipcdn@ietf.org
             Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn




Raftus/Cardona               Expires January 2005            [Page 21]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
             Co-chairs: Richard Woundy, Richard_Woundy@cable.comcast.com
                        Jean-Francois Mule, jf.mule@cablelabs.com"
        DESCRIPTION
            "This is the MIB Module for DOCSIS 2.0 compliant Radio
             Frequency (RF) interfaces in Cable Modems (CM) and
             Cable Modem Termination Systems (CMTS).


             Copyright (C) The Internet Society (2004).  This
             version of this MIB module is part of RFC XXXX; see
             the RFC itself for full legal notices."


        REVISION        "200407190000Z"
        DESCRIPTION
            "Revision of the IETF RF MIB module for DOCSIS 2.0.
             This version published as RFC XXXX."
        -- Note to RFC editor:
        -- RFC editor to replace XXXX with this RFC number
        -- Delete this note


        REVISION "199908190000Z"
        DESCRIPTION
            "Initial Version, published as RFC 2670.
             Modified by Mike StJohns to fix problems identified by
             the first pass of the MIB doctor.  Of special note,
             docsIfRangingResp and docsIfCmtsInsertionInterval were
             obsoleted and replaced by other objects with the same
             functionality, but more appropriate SYNTAX."
        ::= { transmission 127 }



-- Textual Conventions


TenthdBmV ::= TEXTUAL-CONVENTION
        DISPLAY-HINT "d-1"
        STATUS       current
        DESCRIPTION
            "This data type represents power levels that are normally
             expressed in dBmV.  Units are in tenths of a dBmV;
             for example, 5.1 dBmV will be represented as 51."
        SYNTAX       Integer32


TenthdB ::= TEXTUAL-CONVENTION
        DISPLAY-HINT "d-1"
        STATUS       current
        DESCRIPTION
            "This data type represents power levels that are normally
             expressed in dB.  Units are in tenths of a dB;
             for example, 5.1 dB will be represented as 51."
        SYNTAX       Integer32




Raftus/Cardona               Expires January 2005            [Page 22]

Internet Draft             DOCSIS RF Interface MIB          July 2004




DocsisVersion ::= TEXTUAL-CONVENTION
       STATUS          current
       DESCRIPTION     "Indicates the DOCSIS version number."
       SYNTAX          INTEGER {
           docsis10 (1),
           docsis11 (2),
           docsis20 (3)
       }


DocsisQosVersion ::= TEXTUAL-CONVENTION
       STATUS          current
       DESCRIPTION     "Indicates the quality of service level."
       SYNTAX          INTEGER {
           docsis10 (1),
           docsis11 (2)
       }


DocsisUpstreamType ::= TEXTUAL-CONVENTION
       STATUS          current
       DESCRIPTION     "Indicates the DOCSIS Upstream Channel Type."
       SYNTAX          INTEGER {
           unknown (0),
           tdma (1),
           atdma (2),
           scdma (3),
           tdmaAndAtdma (4)
       }


DocsisUpstreamTypeStatus ::= TEXTUAL-CONVENTION
       STATUS          current
       DESCRIPTION
           "Indicates the DOCSIS Upstream Channel Type Status.
            The shared channel indicator type is not valid, since
            this type is used to specifically identify PHY mode."
       SYNTAX          INTEGER {
           unknown (0),
           tdma (1),
           atdma (2),
           scdma (3)
       }



docsIfMibObjects  OBJECT IDENTIFIER ::= { docsIfMib 1 }
docsIfBaseObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 1 }
docsIfCmObjects   OBJECT IDENTIFIER ::= { docsIfMibObjects 2 }
docsIfCmtsObjects OBJECT IDENTIFIER ::= { docsIfMibObjects 3 }







Raftus/Cardona               Expires January 2005            [Page 23]

Internet Draft             DOCSIS RF Interface MIB          July 2004





--
-- BASE GROUP
--


--
-- The following table is implemented on both the Cable Modem (CM)
-- and the Cable Modem Termination System (CMTS).  This table is
-- read only for the CM.
--


docsIfDownstreamChannelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfDownstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table describes the attributes of downstream
             channels (frequency bands)."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-16, and 6-17."
        ::= { docsIfBaseObjects 1 }


docsIfDownstreamChannelEntry OBJECT-TYPE
        SYNTAX      DocsIfDownstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry provides a list of attributes for a single
             Downstream channel.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableDownstream(128)."
        INDEX { ifIndex }
        ::= { docsIfDownstreamChannelTable 1 }


DocsIfDownstreamChannelEntry ::= SEQUENCE {
            docsIfDownChannelId               Integer32,
            docsIfDownChannelFrequency        Integer32,
            docsIfDownChannelWidth            Integer32,
            docsIfDownChannelModulation       INTEGER,
            docsIfDownChannelInterleave       INTEGER,
            docsIfDownChannelPower            TenthdBmV,
            docsIfDownChannelAnnex            INTEGER,
            docsIfDownChannelStorageType      StorageType
        }


docsIfDownChannelId OBJECT-TYPE
        SYNTAX      Integer32 (0..255)




Raftus/Cardona               Expires January 2005            [Page 24]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The Cable Modem Termination System (CMTS) identification
             of the downstream channel within this particular MAC
             interface.  If the interface is down, the object returns
             the most current value.  If the downstream channel ID is
             unknown, this object returns a value of 0."
        ::= { docsIfDownstreamChannelEntry 1 }


docsIfDownChannelFrequency OBJECT-TYPE
        SYNTAX      Integer32 (0..1000000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The center of the downstream frequency associated with
             this channel.  This object will return the current tuner
             frequency.  If a CMTS provides IF output, this object
             will return 0, unless this CMTS is in control of the
             final downstream RF frequency.  See the associated
             compliance object for a description of valid frequencies
             that may be written to this object."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.3.3."
        ::= { docsIfDownstreamChannelEntry 2 }


docsIfDownChannelWidth OBJECT-TYPE
        SYNTAX      Integer32 (0..16000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The bandwidth of this downstream channel.  Most
             implementations are expected to support a channel width
             of 6 MHz (North America) and/or 8 MHz (Europe).  See the
             associated compliance object for a description of the
             valid channel widths for this object."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 6-17."
        ::= { docsIfDownstreamChannelEntry 3 }


docsIfDownChannelModulation OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            other(2),




Raftus/Cardona               Expires January 2005            [Page 25]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            qam64(3),
            qam256(4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The modulation type associated with this downstream
             channel.  If the interface is down, this object either
             returns the configured value (CMTS), the most current
             value (CM), or the value of unknown(1).  See the
             associated conformance object for write conditions and
             limitations.  See the reference for specifics on the
             modulation profiles implied by qam64 and qam256."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 6-17."
        ::= { docsIfDownstreamChannelEntry 4 }


docsIfDownChannelInterleave OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            other(2),
            taps8Increment16(3),
            taps16Increment8(4),
            taps32Increment4(5),
            taps64Increment2(6),
            taps128Increment1(7),
            taps12increment17(8)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The Forward Error Correction (FEC) interleaving used
             for this downstream channel.
             Values are defined as follows:
             taps8Increment16(3):   protection 5.9/4.1 usec,
                                    latency .22/.15 msec
             taps16Increment8(4):   protection 12/8.2 usec,
                                    latency .48/.33 msec
             taps32Increment4(5):   protection 24/16 usec,
                                    latency .98/.68 msec
             taps64Increment2(6):   protection 47/33 usec,
                                    latency 2/1.4 msec
             taps128Increment1(7):  protection 95/66 usec,
                                    latency 4/2.8 msec
             taps12increment17(8):  protection 18/14 usec,
                                    latency 0.43/0.32 msec


            The value 'taps12increment17' is supported by EuroDOCSIS




Raftus/Cardona               Expires January 2005            [Page 26]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            cable systems only and the others by DOCSIS cable systems.


             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM),
             or the value of unknown(1).
             The value of other(2) is returned if the interleave
             is known but not defined in the above list.
             See the associated conformance object for write
             conditions and limitations.  See the reference for the FEC
             configuration described by the setting of this object."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 6-15."
        ::= { docsIfDownstreamChannelEntry 5 }


docsIfDownChannelPower OBJECT-TYPE
        SYNTAX      TenthdBmV
        UNITS       "dBmV"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "At the CMTS, the operational transmit power.  At the CM,
             the received power level.
             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM)
             or the value of 0.  See the associated conformance object
             for write conditions and limitations.  See the reference
             for recommended and required power levels."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-16, 6-17."
        ::= { docsIfDownstreamChannelEntry 6 }


docsIfDownChannelAnnex OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            other(2),
            annexA(3),
            annexB(4),
            annexC(5)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of this object indicates the conformance of
             the implementation to important regional cable standards.
             annexA : Annex A from ITU-T J.83 is used
                      (equivalent to EN 300 429)




Raftus/Cardona               Expires January 2005            [Page 27]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             annexB : Annex B from ITU-T J.83 is used.
             annexC : Annex C from ITU-T J.83 is used."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.3.1, and H.3.1."
        ::= { docsIfDownstreamChannelEntry 7 }


docsIfDownChannelStorageType OBJECT-TYPE
        SYNTAX       StorageType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The storage type for this conceptual row."
        ::= { docsIfDownstreamChannelEntry 8 }


--
-- The following table is implemented on both the CM and the CMTS.
-- For the CM, only attached channels appear in the table.  For the
-- CM, this table is read only as well.
--


docsIfUpstreamChannelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfUpstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table describes the attributes of attached upstream
             channels."
        ::= { docsIfBaseObjects 2 }


docsIfUpstreamChannelEntry OBJECT-TYPE
        SYNTAX      DocsIfUpstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "List of attributes for a single upstream channel.  For
             DOCSIS 2.0 CMTSs, an entry in this table exists for
             each ifEntry with an ifType of docsCableUpstreamChannel
             (205).
             For DOCSIS 1.x CM/CMTSs and DOCSIS 2.0 CMs, an entry in
             this table exists for each ifEntry with an ifType of
             docsCableUpstreamInterface (129)."
        INDEX { ifIndex }
        ::= { docsIfUpstreamChannelTable 1 }


DocsIfUpstreamChannelEntry ::= SEQUENCE {
            docsIfUpChannelId                     Integer32,
            docsIfUpChannelFrequency              Integer32,
            docsIfUpChannelWidth                  Integer32,




Raftus/Cardona               Expires January 2005            [Page 28]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfUpChannelModulationProfile      Unsigned32,
            docsIfUpChannelSlotSize               Unsigned32,
            docsIfUpChannelTxTimingOffset         Unsigned32,
            docsIfUpChannelRangingBackoffStart    Integer32,
            docsIfUpChannelRangingBackoffEnd      Integer32,
            docsIfUpChannelTxBackoffStart         Integer32,
            docsIfUpChannelTxBackoffEnd           Integer32,
            docsIfUpChannelScdmaActiveCodes       Unsigned32,
            docsIfUpChannelScdmaCodesPerSlot      Integer32,
            docsIfUpChannelScdmaFrameSize         Unsigned32,
            docsIfUpChannelScdmaHoppingSeed       Unsigned32,
            docsIfUpChannelType                   DocsisUpstreamType,
            docsIfUpChannelCloneFrom              InterfaceIndexOrZero,
            docsIfUpChannelUpdate                 TruthValue,
            docsIfUpChannelStatus                 RowStatus,
            docsIfUpChannelPreEqEnable            TruthValue
        }


docsIfUpChannelId OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The CMTS identification of the upstream channel."
        ::= { docsIfUpstreamChannelEntry 1 }


docsIfUpChannelFrequency OBJECT-TYPE
        SYNTAX      Integer32 (0..1000000000)
        UNITS       "hertz"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The center of the frequency band associated with this
             upstream interface.  This object returns 0 if the frequency
             is undefined or unknown.  Minimum permitted upstream
             frequency is 5,000,000 Hz for current technology.  See
             the associated conformance object for write conditions
             and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 4-2."
        ::= { docsIfUpstreamChannelEntry 2 }


docsIfUpChannelWidth OBJECT-TYPE
        SYNTAX      Integer32 (0..64000000)
        UNITS       "hertz"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION




Raftus/Cardona               Expires January 2005            [Page 29]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "The bandwidth of this upstream interface.  This object
             returns 0 if the interface width is undefined or unknown.
             Minimum permitted interface width is 200,000 Hz currently.
             See the associated conformance object for write conditions
             and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 6-5."
        ::= { docsIfUpstreamChannelEntry 3 }


docsIfUpChannelModulationProfile OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "An entry identical to the docsIfModIndex in the
             docsIfCmtsModulationTable that describes this channel.
             This channel is further instantiated there by a grouping
             of interval usage codes (IUCs)which together fully describe
             the channel modulation.  This object returns 0 if the
             docsIfCmtsModulationTable entry does not exist or is empty.
             See the associated conformance object for write conditions
             and limitations.


             Setting this object returns a genErr error if the
             following conditions are not satisfied:
             1. All the IUC entries in the selected modulation profile
             MUST have the same value of docsIfCmtsModChannelType.
             2. All of the Modulation parameters in the selected
             modulation profile MUST be consistent with the other
             parameters in this docsIfUpstreamChannelEntry."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-19."
        ::= { docsIfUpstreamChannelEntry 4 }


docsIfUpChannelSlotSize OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Applicable to TDMA and ATDMA channel types only.
             The number of 6.25 microsecond ticks in each upstream
             mini-slot.  Returns zero if the value is undefined, unknown
             or in case of an SCDMA channel.
             See the associated conformance object for write
             conditions and limitations."
        REFERENCE




Raftus/Cardona               Expires January 2005            [Page 30]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.1.2.4."
        ::= { docsIfUpstreamChannelEntry 5 }


docsIfUpChannelTxTimingOffset OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "At the CM, a measure of the current round trip time
             obtained from the ranging offset (initial ranging offset +
             ranging offset adjustments).
             At the CMTS, the maximum of timing offset, among all the
             CMs that are/were present on the channel, taking into
             account all ( initial + periodic ) timing offset
             corrections that were sent for each of the CMs.  Generally,
             these measurements are positive, but if the measurements
             are negative, the value of this object is zero.  Used for
             timing of CM upstream transmissions to ensure synchronized
             arrivals at the CMTS.
             Units are in terms of (6.25 microseconds/64)."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.19."
        ::= { docsIfUpstreamChannelEntry 6 }


docsIfUpChannelRangingBackoffStart OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The initial random backoff window to use when retrying
             Ranging Requests.  Expressed as a power of 2.  A value of
             16 at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used.  See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 8.3.4, and 9.4."
        ::= { docsIfUpstreamChannelEntry 7 }


docsIfUpChannelRangingBackoffEnd OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The final random backoff window to use when retrying




Raftus/Cardona               Expires January 2005            [Page 31]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Ranging Requests.  Expressed as a power of 2.  A value of
             16 at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used.  See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.4, and 9.4."
        ::= { docsIfUpstreamChannelEntry 8 }


docsIfUpChannelTxBackoffStart OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The initial random backoff window to use when retrying
             transmissions.  Expressed as a power of 2.  A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used.  See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.4, and 9.4."
        ::= { docsIfUpstreamChannelEntry 9 }


docsIfUpChannelTxBackoffEnd OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The final random backoff window to use when retrying
             transmissions.  Expressed as a power of 2.  A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used.  See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.4, and 9.4."
        ::= { docsIfUpstreamChannelEntry 10 }


docsIfUpChannelScdmaActiveCodes OBJECT-TYPE
        SYNTAX     Unsigned32 (0 | 64..128)
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
            "Applicable for SCDMA channel types only.
             Number of active codes.  Returns zero for
             Non-SCDMA channel types.  Note that legal




Raftus/Cardona               Expires January 2005            [Page 32]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             values from 64..128 MUST be non-prime."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.11.2.1."
        ::= { docsIfUpstreamChannelEntry 11 }


docsIfUpChannelScdmaCodesPerSlot OBJECT-TYPE
        SYNTAX      Integer32(0 | 2..32)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Applicable for SCDMA channel types only.
             The number of SCDMA codes per mini-slot.
             Returns zero if the value is undefined, unknown or in
             case of a TDMA or ATDMA channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.11.2.1."
        ::= { docsIfUpstreamChannelEntry 12 }


docsIfUpChannelScdmaFrameSize OBJECT-TYPE
        SYNTAX      Unsigned32 (0..32)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Applicable for SCDMA channel types only.
             SCDMA Frame size in units of spreading intervals.
             This value returns zero for non SCDMA Profiles."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.12."
        ::= { docsIfUpstreamChannelEntry 13 }


docsIfUpChannelScdmaHoppingSeed OBJECT-TYPE
        SYNTAX     Unsigned32 (0..32767)
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION
            "Applicable for SCDMA channel types only.
             15 bit seed used for code hopping sequence initialization.
             Returns zero for non-SCDMA channel types."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.14.1."
        ::= { docsIfUpstreamChannelEntry 14 }





Raftus/Cardona               Expires January 2005            [Page 33]

Internet Draft             DOCSIS RF Interface MIB          July 2004



docsIfUpChannelType OBJECT-TYPE
        SYNTAX      DocsisUpstreamType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Reflects the Upstream channel type.
             This object returns the value of docsIfCmtsModChannelType
             for the modulation profile selected in
             docsIfUpChannelModulationProfile for this row."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.1."
        ::= { docsIfUpstreamChannelEntry 15 }


docsIfUpChannelCloneFrom OBJECT-TYPE
        SYNTAX      InterfaceIndexOrZero
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Intended for use when a temporary upstream
             row entry is created for the purpose of manipulating
             parameters for a physical upstream channel.
             Refer to the descriptions of docsIfUpChannelStatus and
             docsIfUpChannelUpdate for details of this procedure.


             This object contains the ifIndex value of the physical
             upstream row whose parameters are to be adjusted.


             Upon setting this object, the values of
             docsIfUpChannelFrequency,
             docsIfUpChannelWidth,
             docsIfUpChannelModulationProfile,
             docsIfUpChannelSlotSize,
             docsIfUpChannelRangingBackoffStart,
             docsIfUpChannelRangingBackoffEnd,
             docsIfUpChannelTxBackoffStart,
             docsIfUpChannelTxBackoffEnd,
             docsIfUpChannelScdmaActiveCodes,
             docsIfUpChannelScdmaCodesPerSlot,
             docsIfUpChannelScdmaFrameSize,
             docsIfUpChannelScdmaHoppingSeed,
             docsIfUpChannelType, and
             docsIfUpChannelPreEqEnable for this row are populated with
             the corresponding values from the row referenced by this
             object.  Setting this object to a non-existent or temporary
             upstream returns an error wrongValue.
             This object MUST contain a value of zero for physical
             upstream rows."
        ::= { docsIfUpstreamChannelEntry 16 }




Raftus/Cardona               Expires January 2005            [Page 34]

Internet Draft             DOCSIS RF Interface MIB          July 2004




docsIfUpChannelUpdate OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            " Used to perform the transfer of adjusted parameters
             from the temporary upstream row to the physical upstream
             row indicated by the docsIfUpChannelCloneFrom object.  The
             transfer is initiated through an SNMP SET to 'true' of
             this object.  The SNMP SET failure returns an error
             genError (snmpv1) or commitFailed (snmpv2c/v3) if the
             adjusted parameter values are not compatible with each
             other.  Reading this object always return 'false'."
        ::= { docsIfUpstreamChannelEntry 17 }


docsIfUpChannelStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "This object is generally intended to be used for the
             creation of a temporary upstream row for the purpose
             of adjusting channel parameters of a physical upstream
             channel row.


             The following restrictions apply to this object:
             1. Entries with this object set to active(1) are
                extensions of defined physical interfaces in the
                interface MIB RFC 2863. Entries created by
                RowStatus createandWait(5) are referred as temporary
                inactive rows used to
                clone parameters.
             2. A status transition from active(1) to notInService(2)
                or destroy(6) is not permitted.
             3. ifAdminStatus from the Interface MIB RFC 2863 is used
                to take an Upstream Channel offline.
             4. Temporary inactive rows MUST be created using
                createAndWait(5).
             5. The only possible status change of a row created using
                createAndWait(5) (i.e. notInService(2)) or notReady(3)
                is to destroy(6).
             6. Temporary created rows MUST never be given the status
                active(1).


             A mandatory procedure for adjusting an specific physical
             Upstream channel is:
             1. Create a temporary row through an SNMP SET using
                createAndWait(5).  Use an ifIndex value outside the
                operational range of the system.




Raftus/Cardona               Expires January 2005            [Page 35]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             2. Set the docsIfUpChannelCloneFrom field to the ifIndex
                value of the physical row whose parameters require
                adjustment.
             3. Adjust the parameter values using the new temporary
                row.  Ensure all parameters contain desired values
                before proceeding to step 4.
             4. Update the physical row by setting the object
                docsIfUpChannelUpdate to true(1).
             5. Delete the temporary row through an SNMP SET using
                destroy(6).
                Temporary entries MUST NOT persist at reinitialization
                of the managed system."
        ::= { docsIfUpstreamChannelEntry 18 }


docsIfUpChannelPreEqEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "At the CMTS, used to enable or disable pre-equalization on
             the upstream channel represented by this table instance.
             At the CM, this object is read-only and reflects the
             status of pre-equalization as represented in the RNG-RSP.
             Pre-equalization is considered enabled at the CM if a
             RNG-RSP with pre-equalization data has been received at
             least once since the last mac reinit."
        DEFVAL {false}
        ::= { docsIfUpstreamChannelEntry 19 }



-- The following table describes the attributes of each class of
-- service.  The entries in this table are referenced from the
-- docsIfServiceEntries.  They exist as a separate table in order to
-- reduce redundant information in docsIfServiceTable.
--
-- This table is implemented at both the CM and the CMTS.
-- The CM need only maintain entries for the classes of service
-- referenced by its docsIfCmServiceTable.
--


docsIfQosProfileTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfQosProfileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes for each class of service."
        ::= { docsIfBaseObjects 3 }


docsIfQosProfileEntry OBJECT-TYPE
        SYNTAX      DocsIfQosProfileEntry




Raftus/Cardona               Expires January 2005            [Page 36]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes for a single class of service.


             If implemented as read-create in the Cable Modem
             Termination System, creation of entries in this table is
             controlled by the value of
             docsIfCmtsQosProfilePermissions.


             If implemented as read-only, entries are created based
             on information in REG-REQ MAC messages received from
             Cable Modems (Cable Modem Termination System
             implementation), or based on information extracted from
             the TFTP option file (Cable Modem implementation).
             In the Cable Modem Termination system, read-only entries
             are removed if no longer referenced by
             docsIfCmtsServiceTable.


             An entry in this table MUST not be removed while it is
             referenced by an entry in docsIfCmServiceTable (Cable
             Modem) or docsIfCmtsServiceTable (Cable Modem Termination
             System).


             An entry in this table SHOULD NOT be changeable while
             it is referenced by an entry in docsIfCmtsServiceTable.


             If this table is created automatically, there SHOULD only
             be a single entry for each Class of Service.  Multiple
             entries with the same Class of Service parameters are NOT
             RECOMMENDED."
        INDEX { docsIfQosProfIndex }
        ::= { docsIfQosProfileTable 1 }


DocsIfQosProfileEntry ::= SEQUENCE {
            docsIfQosProfIndex                Integer32,
            docsIfQosProfPriority             Integer32,
            docsIfQosProfMaxUpBandwidth       Integer32,
            docsIfQosProfGuarUpBandwidth      Integer32,
            docsIfQosProfMaxDownBandwidth     Integer32,
            docsIfQosProfMaxTxBurst           Integer32,  -- deprecated
            docsIfQosProfBaselinePrivacy      TruthValue,
            docsIfQosProfStatus               RowStatus,
            docsIfQosProfMaxTransmitBurst     Integer32,
            docsIfQosProfStorageType          StorageType
        }


docsIfQosProfIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..16383)
        MAX-ACCESS  not-accessible




Raftus/Cardona               Expires January 2005            [Page 37]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            "The index value that uniquely identifies an entry
             in the docsIfQosProfileTable."
        ::= { docsIfQosProfileEntry 1 }


docsIfQosProfPriority OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "A relative priority assigned to this service when
             allocating bandwidth.  Zero indicates lowest priority
             and seven indicates highest priority.
             Interpretation of priority is device-specific.
             MUST NOT be changed while this row is active."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex C.1.1.4."
        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 2 }


docsIfQosProfMaxUpBandwidth OBJECT-TYPE
        SYNTAX      Integer32 (0..100000000)
        UNITS "bits per second"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The maximum upstream bandwidth, in bits per second,
             allowed for a service with this service class.
             Zero if there is no restriction of upstream bandwidth.
             MUST NOT be changed while this row is active."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex C.1.1.4."
        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 3 }


docsIfQosProfGuarUpBandwidth OBJECT-TYPE
        SYNTAX      Integer32 (0..100000000)
        UNITS "bits per second"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Minimum guaranteed upstream bandwidth, in bits per second,
             allowed for a service with this service class.
             MUST NOT be changed while this row is active."
        REFERENCE




Raftus/Cardona               Expires January 2005            [Page 38]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex C.1.1.4."
        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 4 }


docsIfQosProfMaxDownBandwidth OBJECT-TYPE
        SYNTAX      Integer32 (0..100000000)
        UNITS "bits per second"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The maximum downstream bandwidth, in bits per second,
             allowed for a service with this service class.
             Zero if there is no restriction of downstream bandwidth.
             MUST NOT be changed while this row is active."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex C.1.1.4."


        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 5 }


docsIfQosProfMaxTxBurst OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        UNITS "mini-slots"
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION
            "The maximum number of mini-slots that may be requested
             for a single upstream transmission.
             A value of zero means there is no limit.
             MUST NOT be changed while this row is active.
             This object has been deprecated and replaced by
             docsIfQosProfMaxTransmitBurst, to fix a mismatch
             of the units and value range with respect to the DOCSIS
             Maximum Upstream Channel Transmit Burst Configuration
             Setting."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             C.1.1.4."
        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 6 }


docsIfQosProfBaselinePrivacy OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 39]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Indicates whether Baseline Privacy is enabled for this
             service class.
             MUST NOT be changed while this row is active."
        DEFVAL { false }
        ::= { docsIfQosProfileEntry 7 }


docsIfQosProfStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "This is object is to used to create or delete rows in
             this table.  This object MUST NOT be changed from active
             while the row is referenced by the any entry in either
             docsIfCmServiceTable (on the CM), or the
             docsIfCmtsServiceTable (on the CMTS)."
        ::= { docsIfQosProfileEntry 8 }


docsIfQosProfMaxTransmitBurst OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        UNITS       "bytes"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The maximum number of bytes that may be requested for a
             single upstream transmission.  A value of zero means there
             is no limit.  Note: This value does not include any
             physical layer overhead.
             MUST NOT be changed while this row is active."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex C.1.1.4."
        DEFVAL { 0 }
        ::= { docsIfQosProfileEntry 9 }


docsIfQosProfStorageType OBJECT-TYPE
        SYNTAX       StorageType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The storage type for this conceptual row."
        ::= { docsIfQosProfileEntry 10 }


docsIfSignalQualityTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfSignalQualityEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION




Raftus/Cardona               Expires January 2005            [Page 40]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "At the CM, describes the PHY signal quality of downstream
             channels.  At the CMTS, describes the PHY signal quality of
             upstream channels.  At the CMTS, this table MAY exclude
             contention intervals."
        ::= { docsIfBaseObjects 4 }


docsIfSignalQualityEntry OBJECT-TYPE
        SYNTAX      DocsIfSignalQualityEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "At the CM, describes the PHY characteristics of a
             downstream channel.  At the CMTS, describes the PHY signal
             quality of an upstream channel.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableDownstream(128) for Cable Modems.
             For DOCSIS 1.1 Cable Modem Termination Systems, an entry
             exists for each ifEntry with an ifType of
             docsCableUpstream (129).
             For DOCSIS 2.0 Cable Modem Termination Systems, an entry
             exists for each ifEntry with an ifType of
             docsCableUpstreamChannel (205)."
        INDEX { ifIndex }
        ::= { docsIfSignalQualityTable 1 }


DocsIfSignalQualityEntry ::= SEQUENCE {
            docsIfSigQIncludesContention  TruthValue,
            docsIfSigQUnerroreds          Counter32,
            docsIfSigQCorrecteds          Counter32,
            docsIfSigQUncorrectables      Counter32,
            docsIfSigQSignalNoise         TenthdB,
            docsIfSigQMicroreflections    Integer32,
            docsIfSigQEqualizationData    OCTET STRING,
            docsIfSigQExtUnerroreds       Counter64,
            docsIfSigQExtCorrecteds       Counter64,
            docsIfSigQExtUncorrectables   Counter64
        }


docsIfSigQIncludesContention OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "true(1) if this CMTS includes contention intervals in
             the counters in this table.  Always false(2) for CMs."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4.1"
        ::= { docsIfSignalQualityEntry 1 }




Raftus/Cardona               Expires January 2005            [Page 41]

Internet Draft             DOCSIS RF Interface MIB          July 2004




docsIfSigQUnerroreds OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel without error.
             This includes all codewords, whether or not they
             were part of frames destined for this device.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, and 6.3.6."
        ::= { docsIfSignalQualityEntry 2 }


docsIfSigQCorrecteds OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel with correctable
             errors.  This includes all codewords, whether or not
             they were part of frames destined for this device.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, and 6.3.6."
        ::= { docsIfSignalQualityEntry 3 }


docsIfSigQUncorrectables OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel with uncorrectable
             errors.  This includes all codewords, whether or not
             they were part of frames destined for this device.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other




Raftus/Cardona               Expires January 2005            [Page 42]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, and 6.3.6."
        ::= { docsIfSignalQualityEntry 4 }


docsIfSigQSignalNoise OBJECT-TYPE
        SYNTAX      TenthdB
        UNITS       "dB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Signal/Noise ratio as perceived for this channel.
             At the CM, describes the Signal/Noise of the downstream
             channel.  At the CMTS, describes the average Signal/Noise
             of the upstream channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 4-1 and 4-2"
        ::= { docsIfSignalQualityEntry 5 }


docsIfSigQMicroreflections OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        UNITS       "-dBc"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Microreflections including in-channel response
             as perceived on this interface, measured in dBc below
             the signal level.
             This object is not assumed to return an absolutely
             accurate value, but SHOULD give a rough indication
             of microreflections received on this interface.
             It is up to the implementer to provide information
             as accurate as possible. "
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 4-1 and 4-2"
        ::= { docsIfSignalQualityEntry 6 }


docsIfSigQEqualizationData OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..512))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "At the CM, returns the equalization data for the




Raftus/Cardona               Expires January 2005            [Page 43]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             downstream channel.  At the CMTS, returns the average
             equalization data for the upstream channel.  Returns an
             empty string if the value is unknown or if there is no
             equalization data available or defined."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.15."
        ::= { docsIfSignalQualityEntry 7 }


docsIfSigQExtUnerroreds OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel without error.
             This includes all codewords, whether or not they
             were part of frames destined for this device.
             This is the 64 bit version of docsIfSigQUnerroreds.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, and 6.3.6."
        ::= { docsIfSignalQualityEntry 8 }


docsIfSigQExtCorrecteds OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel with correctable
             errors.  This includes all codewords, whether or not
             they were part of frames destined for this device.
             This is the 64 bit version of docsIfSigQCorrecteds.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, and 6.3.6."
        ::= { docsIfSignalQualityEntry 9 }





Raftus/Cardona               Expires January 2005            [Page 44]

Internet Draft             DOCSIS RF Interface MIB          July 2004



docsIfSigQExtUncorrectables OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "codewords"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received on this channel with uncorrectable
             errors.  This includes all codewords, whether or not
             they were part of frames destined for this device.
             This is the 64 bit version of docsIfSigQUncorrectables.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Sections 6.2.4, 6.3.6."
        ::= { docsIfSignalQualityEntry 10 }



--
-- DOCSIS Version of the device
--


docsIfDocsisBaseCapability OBJECT-TYPE
           SYNTAX      DocsisVersion
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                "Indication of the DOCSIS capability of the device."
         REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex G."
           ::= { docsIfBaseObjects 5 }



--
-- CABLE MODEM GROUP
--



--
-- The CM MAC Table
--


docsIfCmMacTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmMacEntry
        MAX-ACCESS  not-accessible




Raftus/Cardona               Expires January 2005            [Page 45]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            "Describes the attributes of each CM MAC interface,
             extending the information available from ifEntry."
        ::= { docsIfCmObjects 1 }


docsIfCmMacEntry OBJECT-TYPE
        SYNTAX      DocsIfCmMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry containing objects describing attributes of
             each MAC entry, extending the information in ifEntry.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableMaclayer(127)."
        INDEX { ifIndex }
        ::= { docsIfCmMacTable 1 }


DocsIfCmMacEntry ::= SEQUENCE {
            docsIfCmCmtsAddress           MacAddress,
            docsIfCmCapabilities          BITS,
            docsIfCmRangingRespTimeout    TimeTicks,
            docsIfCmRangingTimeout        TimeInterval
         }


docsIfCmCmtsAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Identifies the CMTS that is believed to control this MAC
             domain.  At the CM, this will be the source address from
             SYNC, MAP, and other MAC-layer messages.  If the CMTS is
             unknown, returns 00-00-00-00-00-00."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.2.2."
        ::= { docsIfCmMacEntry 1 }


docsIfCmCapabilities OBJECT-TYPE
        SYNTAX      BITS {
            atmCells(0),
            concatenation(1)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Identifies the capabilities of the MAC implementation
             at this interface.  Note that packet transmission is




Raftus/Cardona               Expires January 2005            [Page 46]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             always supported.  Therefore, there is no specific bit
             required to explicitly indicate this capability.
             Note that BITS objects are encoded most significant bit
             first.  For example, if bit 1 is set, the value of this
             object is the octet string '40'H."
        ::= { docsIfCmMacEntry 2 }


-- This object has been obsoleted and replaced by
-- docsIfCmRangingTimeout to correct the typing to TimeInterval.  New
-- implementations of the MIB SHOULD use docsIfCmRangingTimeout
-- instead.


docsIfCmRangingRespTimeout OBJECT-TYPE
        SYNTAX      TimeTicks
        MAX-ACCESS  read-write
        STATUS      obsolete
        DESCRIPTION
            "Waiting time for a Ranging Response packet."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.1.6."
        DEFVAL { 20 }
        ::= { docsIfCmMacEntry 3 }


docsIfCmRangingTimeout OBJECT-TYPE
        SYNTAX      TimeInterval
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Waiting time for a Ranging Response packet.
             This object MUST NOT persist at reinitialization
             of the managed system."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.1.6, timer T3."
        DEFVAL { 20 }
        ::= { docsIfCmMacEntry 4 }


--
-- CM status table.
-- This table is implemented only at the CM.
--


docsIfCmStatusTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION




Raftus/Cardona               Expires January 2005            [Page 47]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "This table maintains a number of status objects
             and counters for Cable Modems."
        ::= { docsIfCmObjects 2 }


docsIfCmStatusEntry OBJECT-TYPE
        SYNTAX      DocsIfCmStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A set of status objects and counters for a single MAC
             layer instance in a Cable Modem.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableMaclayer(127)."
        INDEX { ifIndex }
        ::= { docsIfCmStatusTable 1 }


DocsIfCmStatusEntry ::= SEQUENCE {
            docsIfCmStatusValue               INTEGER,
            docsIfCmStatusCode                OCTET STRING,
            docsIfCmStatusTxPower             TenthdBmV,
            docsIfCmStatusResets              Counter32,
            docsIfCmStatusLostSyncs           Counter32,
            docsIfCmStatusInvalidMaps         Counter32,
            docsIfCmStatusInvalidUcds         Counter32,
            docsIfCmStatusInvalidRangingResponses   Counter32,
            docsIfCmStatusInvalidRegistrationResponses Counter32,
            docsIfCmStatusT1Timeouts          Counter32,
            docsIfCmStatusT2Timeouts          Counter32,
            docsIfCmStatusT3Timeouts          Counter32,
            docsIfCmStatusT4Timeouts          Counter32,
            docsIfCmStatusRangingAborteds     Counter32,
            docsIfCmStatusDocsisOperMode      DocsisQosVersion,
            docsIfCmStatusModulationType      DocsisUpstreamTypeStatus,
            docsIfCmStatusEqualizationData    OCTET STRING,
            docsIfCmStatusUCCs                Counter32,
            docsIfCmStatusUCCFails            Counter32
        }


docsIfCmStatusValue OBJECT-TYPE
        SYNTAX      INTEGER {
            other(1),
            notReady(2),
            notSynchronized(3),
            phySynchronized(4),
            usParametersAcquired(5),
            rangingComplete(6),
            ipComplete(7),
            todEstablished(8),
            securityEstablished(9),
            paramTransferComplete(10),




Raftus/Cardona               Expires January 2005            [Page 48]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            registrationComplete(11),
            operational(12),
            accessDenied(13)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current Cable Modem connectivity state, as specified
             in the RF Interface Specification.  Interpretations for
             state values 1-12 are clearly outlined in the SP-RFI
             reference given below.
             The state value accessDenied(13) indicates the CMTS has
             sent a Registration Aborted message to the CM. Same
             state is reported as accessDenied(7) by the CMTS object
             docsIfCmtsCmStatusValue."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 11.2.
             Data-Over-Cable Service Interface Specifications:
             Operations Support System Interface Specification
             SP-OSSIv2.0-IO4-030730, Section 6.3.4.2."
        ::= { docsIfCmStatusEntry 1 }


docsIfCmStatusCode OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..16))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Status code for this Cable Modem as defined in the
             OSSI Specification.  The status code consists
             of a single character indicating error groups, followed
             by a two- or three-digit number indicating the status
             condition, followed by a decimal."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications:
             Operations Support System Interface Specification
             SP-OSSIv2.0-I04-030730, Annex D."
        ::= { docsIfCmStatusEntry 2 }


docsIfCmStatusTxPower OBJECT-TYPE
        SYNTAX      TenthdBmV
        UNITS       "dBmV"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The operational transmit power for the attached upstream
             channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio




Raftus/Cardona               Expires January 2005            [Page 49]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.18."
        ::= { docsIfCmStatusEntry 3 }


docsIfCmStatusResets OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the CM reset or initialized this
             interface."
        ::= { docsIfCmStatusEntry 4 }


docsIfCmStatusLostSyncs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the CM lost synchronization with
             the downstream channel.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.2."
        ::= { docsIfCmStatusEntry 5 }


docsIfCmStatusInvalidMaps OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the CM received invalid MAP messages.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.4."
        ::= { docsIfCmStatusEntry 6 }


docsIfCmStatusInvalidUcds OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 50]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Number of times the CM received invalid UCD messages.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.3."
        ::= { docsIfCmStatusEntry 7 }


docsIfCmStatusInvalidRangingResponses OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the CM received invalid ranging response
             messages.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.6."
        ::= { docsIfCmStatusEntry 8 }


docsIfCmStatusInvalidRegistrationResponses OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the CM received invalid registration
             response messages.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.8."
        ::= { docsIfCmStatusEntry 9 }


docsIfCmStatusT1Timeouts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 51]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Number of times counter T1 expired in the CM.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 9-2."
        ::= { docsIfCmStatusEntry 10 }


docsIfCmStatusT2Timeouts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times counter T2 expired in the CM.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 9-2."
        ::= { docsIfCmStatusEntry 11 }


docsIfCmStatusT3Timeouts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times counter T3 expired in the CM.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 9-2."
        ::= { docsIfCmStatusEntry 12 }


docsIfCmStatusT4Timeouts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times counter T4 expired in the CM.




Raftus/Cardona               Expires January 2005            [Page 52]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 9-2."
        ::= { docsIfCmStatusEntry 13 }


docsIfCmStatusRangingAborteds OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Number of times the ranging process was aborted
             by the CMTS.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.3.3."
        ::= { docsIfCmStatusEntry 14 }


docsIfCmStatusDocsisOperMode OBJECT-TYPE
        SYNTAX      DocsisQosVersion
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "Indication whether the device has registered using 1.0
              Class of Service or 1.1 Quality of Service.
              An unregistered CM SHOULD indicate 'docsis11' for a
              docsIfDocsisBaseCapability value of DOCSIS 1.1/2.0.  An
              unregistered CM SHOULD indicate 'docsis10'  for a
              docsIfDocsisBaseCapability value of DOCSIS 1.0."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex G."
        ::= { docsIfCmStatusEntry 15 }


docsIfCmStatusModulationType OBJECT-TYPE
         SYNTAX      DocsisUpstreamTypeStatus
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
             "Indicates modulation type status currently used by the




Raftus/Cardona               Expires January 2005            [Page 53]

Internet Draft             DOCSIS RF Interface MIB          July 2004



              CM.  Since this object specifically identifies PHY mode,
              the shared upstream channel type is not permitted."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.1."


         ::= { docsIfCmStatusEntry 16 }


docsIfCmStatusEqualizationData OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..512))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Pre-equalization data for this CM after convolution with
             data indicated in the RNG-RSP.  This data is valid when
             docsIfUpChannelPreEqEnable is set to true.  The
             value SHOULD be formatted as defined in the following
             REFERENCE, beginning with the main tap location field.
             The type and length fields shown in the referenced figure
             MUST NOT be included.
             Returns an empty string if the value is unknown or if
             there is no equalization data available or defined."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 8-23."
        ::= { docsIfCmStatusEntry 17 }


docsIfCmStatusUCCs OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "The number of successful Upstream Channel Change
             transactions.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmStatusEntry 18 }


docsIfCmStatusUCCFails OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "The number of failed Upstream Channel Change
             transactions.
             Discontinuities in the value of this counter can occur




Raftus/Cardona               Expires January 2005            [Page 54]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmStatusEntry 19 }



--
-- The Cable Modem Service Table
--


docsIfCmServiceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmServiceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes of each upstream service queue
             on a CM."
        ::= { docsIfCmObjects 3 }


docsIfCmServiceEntry OBJECT-TYPE
        SYNTAX      DocsIfCmServiceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes of an upstream bandwidth service
             queue.
             An entry in this table exists for each Service ID.
             The primary index is an ifIndex with an ifType of
             docsCableMaclayer(127)."
        INDEX { ifIndex, docsIfCmServiceId }
        ::= { docsIfCmServiceTable 1 }


DocsIfCmServiceEntry ::= SEQUENCE {
            docsIfCmServiceId               Integer32,
            docsIfCmServiceQosProfile       Integer32,
            docsIfCmServiceTxSlotsImmed     Counter32,
            docsIfCmServiceTxSlotsDed       Counter32,
            docsIfCmServiceTxRetries        Counter32,
            docsIfCmServiceTxExceededs      Counter32,
            docsIfCmServiceRqRetries        Counter32,
            docsIfCmServiceRqExceededs      Counter32,
            docsIfCmServiceExtTxSlotsImmed  Counter64,
            docsIfCmServiceExtTxSlotsDed    Counter64
         }


docsIfCmServiceId OBJECT-TYPE
        SYNTAX      Integer32 (1..16383)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION




Raftus/Cardona               Expires January 2005            [Page 55]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "Identifies a service queue for upstream bandwidth.  The
             attributes of this service queue are shared between the
             CM and the CMTS.  The CMTS allocates upstream bandwidth
             to this service queue based on requests from the CM and
             on the class of service associated with this queue."
        ::= { docsIfCmServiceEntry 1 }


docsIfCmServiceQosProfile OBJECT-TYPE
        SYNTAX      Integer32 (0..16383)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The index in docsIfQosProfileTable describing the quality
             of service attributes associated with this particular
             service.  If no associated entry in docsIfQosProfileTable
             exists, this object returns a value of zero."
        ::= { docsIfCmServiceEntry 2 }


docsIfCmServiceTxSlotsImmed OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of upstream mini-slots which have been used to
             transmit data PDUs in immediate (contention) mode.  This
             includes only those PDUs that are presumed to have
             arrived at the headend (i.e., those which were explicitly
             acknowledged.) It does not include retransmission attempts
             or mini-slots used by Requests.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 3 }


docsIfCmServiceTxSlotsDed OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of upstream mini-slots which have been used to
             transmit data PDUs in dedicated mode (i.e., as a result
             of a unicast Data Grant).
             Discontinuities in the value of this counter can occur




Raftus/Cardona               Expires January 2005            [Page 56]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 4 }


docsIfCmServiceTxRetries OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of attempts to transmit data PDUs containing
             requests for acknowledgment that did not result in
             acknowledgment.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 5 }


docsIfCmServiceTxExceededs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of data PDUs transmission failures due to
             excessive retries without acknowledgment.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 6 }


docsIfCmServiceRqRetries OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of attempts to transmit bandwidth requests




Raftus/Cardona               Expires January 2005            [Page 57]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             which did not result in acknowledgment.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 7 }


docsIfCmServiceRqExceededs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of requests for bandwidth which failed due to
             excessive retries without acknowledgment.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 8 }


docsIfCmServiceExtTxSlotsImmed OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of upstream mini-slots which have been used to
             transmit data PDUs in immediate (contention) mode.  This
             includes only those PDUs that are presumed to have
             arrived at the headend (i.e., those which were explicitly
             acknowledged.) It does not include retransmission attempts
             or mini-slots used by Requests.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 9 }





Raftus/Cardona               Expires January 2005            [Page 58]

Internet Draft             DOCSIS RF Interface MIB          July 2004



docsIfCmServiceExtTxSlotsDed OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of upstream mini-slots which have been used to
             transmit data PDUs in dedicated mode (i.e., as a result
             of a unicast Data Grant).
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.4."
        ::= { docsIfCmServiceEntry 10 }



--
-- CMTS GROUP
--


--
-- The CMTS MAC Table
--


docsIfCmtsMacTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes of each CMTS MAC interface,
             extending the information available from ifEntry.
             Mandatory for all CMTS devices."
        ::= { docsIfCmtsObjects 1 }


docsIfCmtsMacEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry containing objects describing attributes of each
             MAC entry, extending the information in ifEntry.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableMaclayer(127)."
        INDEX { ifIndex }
        ::= { docsIfCmtsMacTable 1 }





Raftus/Cardona               Expires January 2005            [Page 59]

Internet Draft             DOCSIS RF Interface MIB          July 2004



DocsIfCmtsMacEntry ::= SEQUENCE {
            docsIfCmtsCapabilities            BITS,
            docsIfCmtsSyncInterval            Integer32,
            docsIfCmtsUcdInterval             Integer32,
            docsIfCmtsMaxServiceIds           Integer32,
            docsIfCmtsInsertionInterval       TimeTicks,   -- Obsolete
            docsIfCmtsInvitedRangingAttempts  Integer32,
            docsIfCmtsInsertInterval          TimeInterval,
            docsIfCmtsMacStorageType          StorageType
        }


docsIfCmtsCapabilities OBJECT-TYPE
        SYNTAX      BITS {
            atmCells(0),
            concatenation(1)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Identifies the capabilities of the CMTS MAC
             implementation at this interface.  Note that packet
             transmission is always supported.  Therefore, there
             is no specific bit required to explicitly indicate
             this capability.
             Note that BITS objects are encoded most significant bit
             first.  For example, if bit 1 is set, the value of this
             object is the octet string '40'H."
        ::= { docsIfCmtsMacEntry 1 }


docsIfCmtsSyncInterval OBJECT-TYPE
        SYNTAX      Integer32 (1..200)
        UNITS       "Milliseconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The interval between CMTS transmission of successive SYNC
             messages at this interface."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.3."
        ::= { docsIfCmtsMacEntry 2 }


docsIfCmtsUcdInterval OBJECT-TYPE
        SYNTAX      Integer32 (1..2000)
        UNITS       "Milliseconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The interval between CMTS transmission of successive




Raftus/Cardona               Expires January 2005            [Page 60]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Upstream Channel Descriptor messages for each upstream
             channel at this interface."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.3"
        ::= { docsIfCmtsMacEntry 3 }


docsIfCmtsMaxServiceIds OBJECT-TYPE
        SYNTAX     Integer32 (1..16383)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The maximum number of service IDs that may be
             simultaneously active."
        ::= { docsIfCmtsMacEntry 4 }


-- This object has been obsoleted and replaced by
-- docsIfCmtsInsertInterval to fix a SYNTAX typing problem.  New
-- implementations of this MIB SHOULD use that object instead.
docsIfCmtsInsertionInterval OBJECT-TYPE
        SYNTAX      TimeTicks
        MAX-ACCESS  read-write
        STATUS      obsolete
        DESCRIPTION
            "The amount of time to elapse between each broadcast
             initial maintenance grant.  Broadcast initial maintenance
             grants are used to allow new cable modems to join the
             network.  Zero indicates that a vendor-specific algorithm
             is used instead of a fixed time.  Maximum amount of time
             permitted by the specification is 2 seconds."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex B."
        ::= { docsIfCmtsMacEntry 5 }


docsIfCmtsInvitedRangingAttempts OBJECT-TYPE
        SYNTAX      Integer32 (0..1024)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The maximum number of attempts to make on invitations
             for ranging requests.  A value of zero means the system
             SHOULD attempt to range forever."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 9.3.3 and Annex B."
        ::= { docsIfCmtsMacEntry 6 }




Raftus/Cardona               Expires January 2005            [Page 61]

Internet Draft             DOCSIS RF Interface MIB          July 2004




docsIfCmtsInsertInterval OBJECT-TYPE
        SYNTAX      TimeInterval
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The amount of time to elapse between each broadcast
             initial maintenance grant.  Broadcast initial maintenance
             grants are used to allow new cable modems to join the
             network.  Zero indicates that a vendor-specific algorithm
             is used instead of a fixed time.  Maximum amount of time
             permitted by the specification is 2 seconds."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex B."
        ::= { docsIfCmtsMacEntry 7 }


docsIfCmtsMacStorageType OBJECT-TYPE
        SYNTAX       StorageType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The storage type for this conceptual row."
        ::= { docsIfCmtsMacEntry 8 }


--
--
-- CMTS status table.
--


docsIfCmtsStatusTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "For the MAC layer, this group maintains a number of
             status objects and counters."
        ::= { docsIfCmtsObjects 2 }


docsIfCmtsStatusEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "Status entry for a single MAC layer.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableMaclayer(127)."
        INDEX { ifIndex }
        ::= { docsIfCmtsStatusTable 1 }




Raftus/Cardona               Expires January 2005            [Page 62]

Internet Draft             DOCSIS RF Interface MIB          July 2004




DocsIfCmtsStatusEntry ::= SEQUENCE {
            docsIfCmtsStatusInvalidRangeReqs        Counter32,
            docsIfCmtsStatusRangingAborteds         Counter32,
            docsIfCmtsStatusInvalidRegReqs          Counter32,
            docsIfCmtsStatusFailedRegReqs           Counter32,
            docsIfCmtsStatusInvalidDataReqs         Counter32,
            docsIfCmtsStatusT5Timeouts              Counter32
        }


docsIfCmtsStatusInvalidRangeReqs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This object counts invalid RNG-REQ messages received on
             this interface.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.5."


        ::= { docsIfCmtsStatusEntry 1 }


docsIfCmtsStatusRangingAborteds OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This object counts ranging attempts that were explicitly
             aborted by the CMTS.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.6."
        ::= { docsIfCmtsStatusEntry 2 }


docsIfCmtsStatusInvalidRegReqs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION




Raftus/Cardona               Expires January 2005            [Page 63]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            "This object counts invalid REG-REQ messages received on
             this interface.  That is, syntax, out of range parameters,
             or erroneous requests.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.7."
        ::= { docsIfCmtsStatusEntry 3 }


docsIfCmtsStatusFailedRegReqs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This object counts failed registration attempts.  Included
             are docsIfCmtsStatusInvalidRegReqs, authentication and
             class of service failures.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.3.7."
        ::= { docsIfCmtsStatusEntry 4 }


docsIfCmtsStatusInvalidDataReqs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This object counts invalid data request messages
             received on this interface.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsStatusEntry 5 }


docsIfCmtsStatusT5Timeouts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This object counts the number of times counter T5




Raftus/Cardona               Expires January 2005            [Page 64]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             expired on this interface.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 9-2."
        ::= { docsIfCmtsStatusEntry 6 }


--
-- CM status table (within CMTS).
-- This table is implemented only at the CMTS.
-- It contains per CM status information available in the CMTS.
--


docsIfCmtsCmStatusTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsCmStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A set of objects in the CMTS, maintained for each
             Cable Modem connected to this CMTS."
        ::= { docsIfCmtsObjects 3 }


docsIfCmtsCmStatusEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsCmStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Status information for a single Cable Modem.
             An entry in this table exists for each Cable Modem
             that is connected to the CMTS implementing this table."
        INDEX { docsIfCmtsCmStatusIndex }
        ::= { docsIfCmtsCmStatusTable 1 }


DocsIfCmtsCmStatusEntry ::= SEQUENCE {
            docsIfCmtsCmStatusIndex               Integer32,
            docsIfCmtsCmStatusMacAddress          MacAddress,
            docsIfCmtsCmStatusIpAddress       IpAddress,  -- deprecated
            docsIfCmtsCmStatusDownChannelIfIndex  InterfaceIndexOrZero,
            docsIfCmtsCmStatusUpChannelIfIndex    InterfaceIndexOrZero,
            docsIfCmtsCmStatusRxPower             TenthdBmV,
            docsIfCmtsCmStatusTimingOffset        Unsigned32,
            docsIfCmtsCmStatusEqualizationData    OCTET STRING,
            docsIfCmtsCmStatusValue               INTEGER,
            docsIfCmtsCmStatusUnerroreds          Counter32,
            docsIfCmtsCmStatusCorrecteds          Counter32,
            docsIfCmtsCmStatusUncorrectables      Counter32,




Raftus/Cardona               Expires January 2005            [Page 65]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmtsCmStatusSignalNoise         TenthdB,
            docsIfCmtsCmStatusMicroreflections    Integer32,
            docsIfCmtsCmStatusExtUnerroreds       Counter64,
            docsIfCmtsCmStatusExtCorrecteds       Counter64,
            docsIfCmtsCmStatusExtUncorrectables   Counter64,
            docsIfCmtsCmStatusDocsisRegMode       DocsisQosVersion,
            docsIfCmtsCmStatusModulationType  DocsisUpstreamTypeStatus,
            docsIfCmtsCmStatusInetAddressType     InetAddressType,
            docsIfCmtsCmStatusInetAddress         InetAddress,
            docsIfCmtsCmStatusValueLastUpdate     TimeStamp,
            docsIfCmtsCmStatusHighResolutionTimingOffset Unsigned32
        }


docsIfCmtsCmStatusIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index value to uniquely identify an entry in this table.
             For an individual Cable Modem, this index value SHOULD
             not change during CMTS uptime."
        ::= { docsIfCmtsCmStatusEntry 1 }


docsIfCmtsCmStatusMacAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "MAC address of this Cable Modem.  If the Cable Modem has
             multiple MAC addresses, this is the MAC address associated
             with the Cable interface."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 8.2.2."
        ::= { docsIfCmtsCmStatusEntry 2 }


docsIfCmtsCmStatusIpAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION
            "IP address of this Cable Modem.  If the Cable Modem has no
             IP address assigned, or the IP address is unknown, this
             object returns a value of 0.0.0.0.  If the Cable Modem has
             multiple IP addresses, this object returns the IP address
             associated with the Cable interface.
             This object has been deprecated and replaced by
             docsIfCmtsCmStatusInetAddressType and
             docsIfCmtsCmStatusInetAddress, to enable IPv6 addressing




Raftus/Cardona               Expires January 2005            [Page 66]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             in the future."
        ::= { docsIfCmtsCmStatusEntry 3 }


docsIfCmtsCmStatusDownChannelIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndexOrZero
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "IfIndex of the downstream channel this CM is connected
             to.  If the downstream channel is unknown, this object
             returns a value of zero."
        ::= { docsIfCmtsCmStatusEntry 4 }


docsIfCmtsCmStatusUpChannelIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndexOrZero
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "For DOCSIS 2.0, indicates the ifIndex of the logical
            upstream channel (ifType 205) this CM is connected to.
            For DOCSIS 1.x, indicates the ifIndex of the upstream
             channel (ifType 129) this CM is connected to.
             If the upstream channel is unknown, this object
             returns a value of zero."
        ::= { docsIfCmtsCmStatusEntry 5 }


docsIfCmtsCmStatusRxPower OBJECT-TYPE
        SYNTAX      TenthdBmV
        UNITS       "dBmV"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The receive power as perceived for upstream data from
             this Cable Modem.
             If the receive power is unknown, this object returns
             a value of zero."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.18."
        ::= { docsIfCmtsCmStatusEntry 6 }


docsIfCmtsCmStatusTimingOffset OBJECT-TYPE
        SYNTAX      Unsigned32 (0..4294967295)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A measure of the current round trip time for this CM.
             Used for timing of CM upstream transmissions to ensure
             synchronized arrivals at the CMTS.  Units are in terms




Raftus/Cardona               Expires January 2005            [Page 67]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             of (6.25 microseconds/64).  Returns zero if the value
             is unknown.
             For channels requiring finer resolution, please refer to
             object docsIfCmtsCmStatusHighResolutionTimingOffset."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.17."
        ::= { docsIfCmtsCmStatusEntry 7 }


docsIfCmtsCmStatusEqualizationData OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..512))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Equalization data for this CM.  Returns an empty string
             if the value is unknown or if there is no equalization
             data available or defined."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Figure 8-23."
        ::= { docsIfCmtsCmStatusEntry 8 }


docsIfCmtsCmStatusValue OBJECT-TYPE
        SYNTAX      INTEGER {
            other(1),
            ranging(2),
            rangingAborted(3),
            rangingComplete(4),
            ipComplete(5),
            registrationComplete(6),
            accessDenied(7),
            operational(8), -- deprecated
            registeredBPIInitializing(9)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current Cable Modem connectivity state, as specified
             in the RF Interface Specification.  Returned status
             information is the CM status as assumed by the CMTS,
             and indicates the following events:
             other(1)
                Any state other than below.
             ranging(2)
                The CMTS has received an Initial Ranging Request
                message from the CM, and the ranging process is not
                yet complete.
             rangingAborted(3)




Raftus/Cardona               Expires January 2005            [Page 68]

Internet Draft             DOCSIS RF Interface MIB          July 2004



                The CMTS has sent a Ranging Abort message to the CM.
             rangingComplete(4)
                The CMTS has sent a Ranging Complete message to the CM.
             ipComplete(5)
                The CMTS has received a DHCP reply message and
                forwarded it to the CM.
             registrationComplete(6)
                The CMTS has sent a Registration Response message to
                the CM.
             accessDenied(7)
                The CMTS has sent a Registration Aborted message
                to the CM.
             operational(8) -- deprecated value
                This value has been deprecated in favor of the more
                Specific registeredBPIInitializing(9).
             registeredBPIInitializing(9)
                Baseline Privacy (BPI) is enabled and the CMTS is in the
                process of completing BPI initialization.  This state
                MAY last for a significant length of time if failures
                occur during the initialization process.  After
                completion of  BPI initialization, the CMTS will report
                registrationComplete(6).
             The CMTS only needs to report states it is able to
             detect."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 11.2."
        ::= { docsIfCmtsCmStatusEntry 9 }


docsIfCmtsCmStatusUnerroreds OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received without error from this Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.4."
        ::= { docsIfCmtsCmStatusEntry 10 }


docsIfCmtsCmStatusCorrecteds OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 69]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Codewords received with correctable errors from this
             Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.4."
        ::= { docsIfCmtsCmStatusEntry 11 }


docsIfCmtsCmStatusUncorrectables OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received with uncorrectable errors from this
             Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.4."
        ::= { docsIfCmtsCmStatusEntry 12 }


docsIfCmtsCmStatusSignalNoise OBJECT-TYPE
        SYNTAX      TenthdB
        UNITS       "dB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Signal/Noise ratio as perceived for upstream data from
             this Cable Modem.
             If the Signal/Noise is unknown, this object returns
             a value of zero."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 4-1 and 4-2."
        ::= { docsIfCmtsCmStatusEntry 13 }


docsIfCmtsCmStatusMicroreflections OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        UNITS       "dBc"
        MAX-ACCESS  read-only




Raftus/Cardona               Expires January 2005            [Page 70]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            "Total microreflections including in-channel response
             as perceived on this interface, measured in dBc below
             the signal level.
             This object is not assumed to return an absolutely
             accurate value, but SHOULD give a rough indication
             of microreflections received on this interface.
             It is up to the implementer to provide information
             as accurate as possible.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 4-1 and 4-2"
        ::= { docsIfCmtsCmStatusEntry 14 }


docsIfCmtsCmStatusExtUnerroreds OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received without error from this Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.5."
        ::= { docsIfCmtsCmStatusEntry 15 }


docsIfCmtsCmStatusExtCorrecteds OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received with correctable errors from this
             Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,




Raftus/Cardona               Expires January 2005            [Page 71]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Section 6.2.5."
        ::= { docsIfCmtsCmStatusEntry 16 }


docsIfCmtsCmStatusExtUncorrectables OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Codewords received with uncorrectable errors from this
             Cable Modem.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.5."
        ::= { docsIfCmtsCmStatusEntry 17 }


docsIfCmtsCmStatusDocsisRegMode OBJECT-TYPE
           SYNTAX      DocsisQosVersion
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
               "Indication whether the CM has registered using 1.0
                Class of Service or 1.1 Quality of Service."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Annex G."
        ::= { docsIfCmtsCmStatusEntry 18 }


docsIfCmtsCmStatusModulationType OBJECT-TYPE
         SYNTAX      DocsisUpstreamTypeStatus
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
             "Indicates modulation type currently used by the CM.  Since
              this object specifically identifies PHY mode, the shared
              type is not permitted.  If the upstream channel is
              unknown, this object returns a value of zero."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-19."
         ::= { docsIfCmtsCmStatusEntry 19 }


docsIfCmtsCmStatusInetAddressType OBJECT-TYPE
           SYNTAX      InetAddressType




Raftus/Cardona               Expires January 2005            [Page 72]

Internet Draft             DOCSIS RF Interface MIB          July 2004



           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
               "The type of internet address of
                docsIfCmtsCmStatusInetAddress.  If the cable modem
                Internet address is unassigned or unknown, then the
                value of this object is unknown(0)."
           ::= { docsIfCmtsCmStatusEntry 20 }


docsIfCmtsCmStatusInetAddress OBJECT-TYPE
           SYNTAX      InetAddress
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
               "Internet address of this Cable Modem.  If the Cable
                Modem has no Internet address assigned, or the Internet
                address is unknown, the value of this object is the
                empty string.  If the Cable Modem has multiple Internet
                addresses, this object returns the Internet address
                associated with the Cable (i.e. RF MAC) interface."
           ::= { docsIfCmtsCmStatusEntry 21 }


docsIfCmtsCmStatusValueLastUpdate OBJECT-TYPE
           SYNTAX      TimeStamp
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
               "The value of sysUpTime when docsIfCmtsCmStatusValue
                was last updated."
           ::= { docsIfCmtsCmStatusEntry 22 }


docsIfCmtsCmStatusHighResolutionTimingOffset OBJECT-TYPE
        SYNTAX      Unsigned32 (0..4294967295)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A measure of the current round trip time for this CM.
             Used for timing of CM upstream transmissions to ensure
             synchronized arrivals at the CMTS.  Units are in terms
             of (6.25 microseconds/(64*256)).  Returns zero if the value
             is unknown.
             This is the high resolution version of object
             docsIfCmtsCmStatusTimingOffset, for channels requiring
             finer resolution."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Section 6.2.17."
        ::= { docsIfCmtsCmStatusEntry 23 }





Raftus/Cardona               Expires January 2005            [Page 73]

Internet Draft             DOCSIS RF Interface MIB          July 2004



--
-- The CMTS Service Table.
--


docsIfCmtsServiceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsServiceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes of upstream service queues
             in a Cable Modem Termination System."
        ::= { docsIfCmtsObjects 4 }


docsIfCmtsServiceEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsServiceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes the attributes of a single upstream bandwidth
             service queue.
             Entries in this table exist for each ifEntry with an
             ifType of docsCableMaclayer(127), and for each service
             queue (Service ID) within this MAC layer.
             Entries in this table are created with the creation of
             individual Service IDs by the MAC layer and removed
             when a Service ID is removed."
        INDEX { ifIndex, docsIfCmtsServiceId }
        ::= { docsIfCmtsServiceTable 1 }


DocsIfCmtsServiceEntry ::= SEQUENCE {
            docsIfCmtsServiceId               Integer32,
            docsIfCmtsServiceCmStatusIndex    Integer32,  -- deprecated
            docsIfCmtsServiceAdminStatus      INTEGER,
            docsIfCmtsServiceQosProfile       Integer32,
            docsIfCmtsServiceCreateTime       TimeStamp,
            docsIfCmtsServiceInOctets         Counter32,
            docsIfCmtsServiceInPackets        Counter32,
            docsIfCmtsServiceNewCmStatusIndex Integer32
        }


docsIfCmtsServiceId OBJECT-TYPE
        SYNTAX      Integer32 (1..16383)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Identifies a service queue for upstream bandwidth.  The
             attributes of this service queue are shared between the
             Cable Modem and the Cable Modem Termination System.
             The CMTS allocates upstream bandwidth to this service
             queue based on requests from the CM and on the class of




Raftus/Cardona               Expires January 2005            [Page 74]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             service associated with this queue."
        ::= { docsIfCmtsServiceEntry 1 }


docsIfCmtsServiceCmStatusIndex OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION
            "Pointer to an entry in docsIfCmtsCmStatusTable identifying
             the Cable Modem using this Service Queue.  If multiple
             Cable Modems are using this Service Queue, the value of
             this object is zero.
             This object has been deprecated and replaced by
             docsIfCmtsServiceNewCmStatusIndex, to fix a mismatch
             of the value range with respect to docsIfCmtsCmStatusIndex
             (1..2147483647)."
        ::= { docsIfCmtsServiceEntry 2 }


docsIfCmtsServiceAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER {
            enabled(1),
            disabled(2),
            destroyed(3) }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Allows a service class for a particular modem to be
             suppressed, (re-)enabled, or deleted altogether."
        ::= { docsIfCmtsServiceEntry 3 }


docsIfCmtsServiceQosProfile OBJECT-TYPE
        SYNTAX      Integer32 (0..16383)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The index in docsIfQosProfileTable describing the quality
             of service attributes associated with this particular
             service.  If no associated docsIfQosProfileTable entry
             exists, this object returns a value of zero."
        ::= { docsIfCmtsServiceEntry 4 }


docsIfCmtsServiceCreateTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of sysUpTime when this entry was created."
        ::= { docsIfCmtsServiceEntry 5 }


docsIfCmtsServiceInOctets OBJECT-TYPE




Raftus/Cardona               Expires January 2005            [Page 75]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        SYNTAX      Counter32
        UNITS       "Bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The cumulative number of Packet Data octets received
             on this Service ID.  The count does not include the
             size of the Cable MAC header.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsServiceEntry 6 }


docsIfCmtsServiceInPackets OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "packets"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The cumulative number of Packet Data packets received
             on this Service ID.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsServiceEntry 7 }


docsIfCmtsServiceNewCmStatusIndex OBJECT-TYPE
        SYNTAX      Integer32 (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Pointer (via docsIfCmtsCmStatusIndex) to an entry in
             docsIfCmtsCmStatusTable identifying the Cable Modem
             using this Service Queue.  If multiple Cable Modems are
             using this Service Queue, the value of this object is
             zero."
        ::= { docsIfCmtsServiceEntry 8 }


--
-- The following table provides upstream channel modulation profiles.
-- Entries in this table can be
-- re-used by one or more upstream channels.  An upstream channel will
-- have a modulation profile
-- for each value of docsIfModIntervalUsageCode.
--


docsIfCmtsModulationTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsModulationEntry




Raftus/Cardona               Expires January 2005            [Page 76]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes a modulation profile associated with one or more
             upstream channels."
        ::= { docsIfCmtsObjects 5 }


docsIfCmtsModulationEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsModulationEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Describes a modulation profile for an Interval Usage Code
             for one or more upstream channels.
             Entries in this table are created by the operator.


             Initial default entries MAY be created at system
             initialization time which could report a value
             'permanent' or 'readOnly' for docsIfCmtsModStorageType.
             A CMTS MAY reject the creation of additional Interval
             Usage Codes for a modulation profile being defined at
             Initialization time.


             No individual objects have to be specified in order
             to create an entry in this table.
             Note that some objects do not have DEFVAL clauses,
             but do have calculated defaults and need not be specified
             during row creation.
             There is no restriction on the changing of values in this
             table while their associated rows are active with the
             exception of:


             1. If a modulation profile is being referenced by one
                or more upstream channels, an attempt to set the value
                of docsIfCmtsModChannelType returns 'inconsistentValue'
                error.


             2. If a modulation profile is being referenced by one
                or more upstream channels, an attempt to set
                docsIfCmtsModControl to destroy(6) or notInService(2)
                returns 'inconsistentValue' error."
        INDEX { docsIfCmtsModIndex, docsIfCmtsModIntervalUsageCode}
        ::= { docsIfCmtsModulationTable 1 }


DocsIfCmtsModulationEntry ::= SEQUENCE {
            docsIfCmtsModIndex                    Integer32,
            docsIfCmtsModIntervalUsageCode        INTEGER,
            docsIfCmtsModControl                  RowStatus,
            docsIfCmtsModType                     INTEGER,
            docsIfCmtsModPreambleLen              Integer32,




Raftus/Cardona               Expires January 2005            [Page 77]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmtsModDifferentialEncoding     TruthValue,
            docsIfCmtsModFECErrorCorrection       Integer32,
            docsIfCmtsModFECCodewordLength        Integer32,
            docsIfCmtsModScramblerSeed            Integer32,
            docsIfCmtsModMaxBurstSize             Integer32,
            docsIfCmtsModGuardTimeSize            Unsigned32,
            docsIfCmtsModLastCodewordShortened    TruthValue,
            docsIfCmtsModScrambler                TruthValue,
            docsIfCmtsModByteInterleaverDepth     Unsigned32,
            docsIfCmtsModByteInterleaverBlockSize Unsigned32,
            docsIfCmtsModPreambleType             INTEGER,
            docsIfCmtsModTcmErrorCorrectionOn     TruthValue,
            docsIfCmtsModScdmaInterleaverStepSize Unsigned32,
            docsIfCmtsModScdmaSpreaderEnable      TruthValue,
            docsIfCmtsModScdmaSubframeCodes       Unsigned32,
            docsIfCmtsModChannelType              DocsisUpstreamType,
            docsIfCmtsModStorageType              StorageType
        }


docsIfCmtsModIndex OBJECT-TYPE
        SYNTAX       Integer32 (1..2147483647)
        MAX-ACCESS   not-accessible
        STATUS      current
        DESCRIPTION
             "An index into the Channel Modulation table representing
              a group of Interval Usage Codes, all associated with the
              same channel."
        ::= { docsIfCmtsModulationEntry 1 }


docsIfCmtsModIntervalUsageCode OBJECT-TYPE
        SYNTAX       INTEGER {
            request(1),
            requestData(2),
            initialRanging(3),
            periodicRanging(4),
            shortData(5),
            longData(6),
            advPhyShortData(9),
            advPhyLongData(10),
            ugs(11)
        }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An index into the Channel Modulation table which, when
             grouped with other Interval Usage Codes, fully
             instantiate all modulation sets for a given upstream
             channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio




Raftus/Cardona               Expires January 2005            [Page 78]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-20."
        ::= { docsIfCmtsModulationEntry 2 }


docsIfCmtsModControl OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Controls and reflects the status of rows in this table."
        ::= { docsIfCmtsModulationEntry 3 }


docsIfCmtsModType OBJECT-TYPE
        SYNTAX      INTEGER {
            other(1),
            qpsk(2),
            qam16(3),
            qam8(4),
            qam32(5),
            qam64(6),
            qam128(7)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The modulation type used on this channel.  Returns
             other(1) if the modulation type is neither
             qpsk, qam16, qam8, qam32, qam64 or qam128.
             Type qam128 is used for SCDMA channels only.
             See the reference for the modulation profiles
             implied by different modulation types."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { qpsk }
        ::= { docsIfCmtsModulationEntry 4 }


docsIfCmtsModPreambleLen OBJECT-TYPE
        SYNTAX      Integer32 (0..1536)
        UNITS       "bits"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The preamble length for this modulation profile in bits.
             Default value is the minimum needed by the implementation
             at the CMTS for the given modulation profile."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,




Raftus/Cardona               Expires January 2005            [Page 79]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Tables 6-7, and 8-19."
        ::= { docsIfCmtsModulationEntry 5 }


docsIfCmtsModDifferentialEncoding OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Specifies whether or not differential encoding is used
             on this channel."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { false }
        ::= { docsIfCmtsModulationEntry 6 }


docsIfCmtsModFECErrorCorrection OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        UNITS       "Bytes"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The number of correctable errored bytes (t) used in
             forward error correction code.  The value of 0 indicates
             no correction is employed.  The number of check bytes
             appended will be twice this value."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { 0 }
        ::= { docsIfCmtsModulationEntry 7 }


docsIfCmtsModFECCodewordLength OBJECT-TYPE
        SYNTAX      Integer32 (1..255)
        UNITS       "Bytes"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The number of data bytes (k) in the forward error
             correction codeword.
             This object is not used if docsIfCmtsModFECErrorCorrection
             is zero."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { 32 }
        ::= { docsIfCmtsModulationEntry 8 }




Raftus/Cardona               Expires January 2005            [Page 80]

Internet Draft             DOCSIS RF Interface MIB          July 2004




docsIfCmtsModScramblerSeed OBJECT-TYPE
        SYNTAX      Integer32 (0..32767)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The 15 bit seed value for the scrambler polynomial."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-19."
        DEFVAL { 0 }
        ::= { docsIfCmtsModulationEntry 9 }


docsIfCmtsModMaxBurstSize OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        UNITS       "mini-slots"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The maximum number of mini-slots that can be transmitted
             during this channel's burst time.  Returns zero if the
             burst length is bounded by the allocation MAP rather than
             this profile.
             Default value is 0 except for shortData, where it is 8."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-19."
        ::= { docsIfCmtsModulationEntry 10 }


docsIfCmtsModGuardTimeSize OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "Symbol-times"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of symbol-times which MUST follow the end of
             this channel's burst.  Default value is the minimum time
             needed by the implementation for this modulation profile."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        ::= { docsIfCmtsModulationEntry 11 }


docsIfCmtsModLastCodewordShortened OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 81]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Indicates if the last FEC codeword is truncated."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { true }
        ::= { docsIfCmtsModulationEntry 12 }


docsIfCmtsModScrambler OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Indicates if the scrambler is employed."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { false }
        ::= { docsIfCmtsModulationEntry 13 }


docsIfCmtsModByteInterleaverDepth OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "ATDMA Byte Interleaver Depth (Ir).  This object returns 1
             for non ATDMA profiles."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { 1 }
        ::= { docsIfCmtsModulationEntry 14 }


docsIfCmtsModByteInterleaverBlockSize OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "ATDMA Byte Interleaver Block size (Br).  This object
             returns zero for non ATDMA profiles "
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { 18 }
        ::= { docsIfCmtsModulationEntry 15 }





Raftus/Cardona               Expires January 2005            [Page 82]

Internet Draft             DOCSIS RF Interface MIB          July 2004



docsIfCmtsModPreambleType OBJECT-TYPE
        SYNTAX       INTEGER {
            unknown(0),
            qpsk0(1),
            qpsk1(2)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Preamble type for DOCSIS 2.0 bursts.  The value
             'unknown(0)' represents a row entry consisting only of
             DOCSIS 1.x bursts"
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { qpsk0 }
        ::= { docsIfCmtsModulationEntry 16 }


docsIfCmtsModTcmErrorCorrectionOn OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Trellis Code Modulation (TCM) On/Off.  This value returns
             false for non S-CDMA profiles."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { false }
        ::= { docsIfCmtsModulationEntry 17 }


docsIfCmtsModScdmaInterleaverStepSize OBJECT-TYPE
        SYNTAX      Unsigned32 (0 | 1..32)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            " S-CDMA Interleaver step size.  This value returns zero
              for non S-CDMA profiles."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        DEFVAL { 1 }
        ::= { docsIfCmtsModulationEntry 18 }


docsIfCmtsModScdmaSpreaderEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create




Raftus/Cardona               Expires January 2005            [Page 83]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            " S-CDMA spreader.  This value returns false for non S-CDMA
              profiles.  Default value for IUC 3 and 4 is OFF, for
              all other IUCs it is ON."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Tables 6-7, and 8-19."
        ::= { docsIfCmtsModulationEntry 19 }


docsIfCmtsModScdmaSubframeCodes OBJECT-TYPE
        SYNTAX      Unsigned32 (0 | 1..128)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            " S-CDMA sub-frame size.  This value returns zero
              for non S-CDMA profiles."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 6-7, and 8-19."
        DEFVAL { 1 }
        ::= { docsIfCmtsModulationEntry 20 }


docsIfCmtsModChannelType OBJECT-TYPE
        SYNTAX      DocsisUpstreamType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Describes the modulation channel type for this modulation
             entry.
             All the active entries in a modulation profile (ie all
             active entries that share a common docsIfCmtsModIndex)
             MUST have the same value of docsIfCmtsModChannelType."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I05-040407,
             Table 8-19."
        DEFVAL { tdma }
        ::= { docsIfCmtsModulationEntry 21 }


docsIfCmtsModStorageType OBJECT-TYPE
        SYNTAX       StorageType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The storage type for this conceptual row."
        DEFVAL      { nonVolatile }
    ::= { docsIfCmtsModulationEntry 22 }




Raftus/Cardona               Expires January 2005            [Page 84]

Internet Draft             DOCSIS RF Interface MIB          July 2004




docsIfCmtsQosProfilePermissions OBJECT-TYPE
        SYNTAX      BITS {
            createByManagement(0),
            updateByManagement(1),
            createByModems(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "This object specifies permitted methods of creating
             entries in docsIfQosProfileTable.
             CreateByManagement(0) is set if entries can be created
             using SNMP.  UpdateByManagement(1) is set if updating
             entries using SNMP is permitted.  CreateByModems(2)
             is set if entries can be created based on information
             in REG-REQ MAC messages received from Cable Modems.
             Information in this object is only applicable if
             docsIfQosProfileTable is implemented as read-create.
             Otherwise, this object is implemented as read-only
             and returns CreateByModems(2).
             Either CreateByManagement(0) or CreateByModems(1)
             MUST be set when writing to this object.
             Note that BITS objects are encoded most significant bit
             first.  For example, if bit 2 is set, the value of this
             object is the octet string '20'H."
        ::= { docsIfCmtsObjects 6 }


docsIfCmtsMacToCmTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsMacToCmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This is a table to provide a quick access index into the
             docsIfCmtsCmStatusTable.  There is exactly one row in this
             table for each row in the docsIfCmtsCmStatusTable.  In
             general, the management station SHOULD use this table only
             to get a pointer into the docsIfCmtsCmStatusTable (which
             corresponds to the CM's RF interface MAC address), and
             SHOULD not iterate (e.g. GetNext through) this table."
        ::= { docsIfCmtsObjects 7 }


docsIfCmtsMacToCmEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsMacToCmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A row in the docsIfCmtsMacToCmTable.
             An entry in this table exists for each Cable Modem
             that is connected to the CMTS implementing this table."




Raftus/Cardona               Expires January 2005            [Page 85]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        INDEX   { docsIfCmtsCmMac }
        ::= {docsIfCmtsMacToCmTable 1 }


DocsIfCmtsMacToCmEntry ::= SEQUENCE {
                docsIfCmtsCmMac     MacAddress,
                docsIfCmtsCmPtr     Integer32
        }


docsIfCmtsCmMac OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The RF side MAC address for the referenced CM.  (E.g. the
             interface on the CM that has docsCableMacLayer(127) as
             its ifType."
        ::= { docsIfCmtsMacToCmEntry 1 }


docsIfCmtsCmPtr OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "An row index into docsIfCmtsCmStatusTable.  When queried
             with the correct instance value (e.g. a CM's MAC address),
             returns the index in docsIfCmtsCmStatusTable which
             represents that CM."
        ::= { docsIfCmtsMacToCmEntry 2 }


-- The following independent object and associated table provide
-- operators with a mechanism to evaluate the load/utilization of
-- both upstream and downstream physical channels.  This information
-- may be used for capacity planning and incident analysis, and may
-- be particularly helpful in provisioning of high value QOS.
--
-- Utilization is expressed as an index representing the calculated
-- percentage utilization of the upstream or downstream channel in
-- the most recent sampling interval (ie. utilization interval).
-- Refer to the DESCRIPTION field of the docsIfCmtsChannelUtUtilization
-- object for definitions and calculation details.


docsIfCmtsChannelUtilizationInterval OBJECT-TYPE
        SYNTAX      Integer32 (0..86400)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The time interval in seconds over which the channel
             utilization index is calculated.  All upstream/downstream
             channels use the same




Raftus/Cardona               Expires January 2005            [Page 86]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             docsIfCmtsChannelUtilizationInterval.
             Setting a value of zero disables utilization reporting.
             A channel utilization index is calculated over a fixed
             window applying to the most recent
             docsIfCmtsChannelUtilizationInterval.  It would therefore
             be prudent to use a relatively short
             docsIfCmtsChannelUtilizationInterval.
             It is a vendor decision whether to reset the timer when
             docsIfCmtsChannelUtilizationInterval is changed during a
             utilization sampling period."
        ::= { docsIfCmtsObjects 8 }


docsIfCmtsChannelUtilizationTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsChannelUtilizationEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Reports utilization statistics for attached upstream and
             downstream physical channels."
        ::= { docsIfCmtsObjects 9 }


docsIfCmtsChannelUtilizationEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsChannelUtilizationEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Utilization statistics for a single upstream or downstream
             physical channel.  An entry exists in this table for each
             ifEntry with an ifType equal to
             docsCableDownstreamInterface (128)
             or docsCableUpstreamInterface (129)."
        INDEX  { ifIndex, docsIfCmtsChannelUtIfType,
             docsIfCmtsChannelUtId }
        ::= { docsIfCmtsChannelUtilizationTable 1 }


DocsIfCmtsChannelUtilizationEntry ::= SEQUENCE {
            docsIfCmtsChannelUtIfType         IANAifType,
            docsIfCmtsChannelUtId             Integer32,
            docsIfCmtsChannelUtUtilization    Integer32
        }


docsIfCmtsChannelUtIfType OBJECT-TYPE
        SYNTAX       IANAifType
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
            "The secondary index into this table.  Indicates the IANA
             interface type associated with this physical channel.
             Only docsCableDownstreamInterface (128) and
             docsCableUpstreamInterface (129) are valid."




Raftus/Cardona               Expires January 2005            [Page 87]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        ::= { docsIfCmtsChannelUtilizationEntry 1 }


docsIfCmtsChannelUtId OBJECT-TYPE
        SYNTAX       Integer32 (0..255)
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
             "The tertiary index into this table.  Indicates the CMTS
              identifier for this physical channel."
        ::= { docsIfCmtsChannelUtilizationEntry 2 }


docsIfCmtsChannelUtUtilization OBJECT-TYPE
        SYNTAX       Integer32 (0..100)
        UNITS        "percent"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The calculated and truncated utilization index for this
             physical upstream or downstream channel, accurate as of
             the most recent docsIfCmtsChannelUtilizationInterval.


             Upstream Channel Utilization Index:
             The upstream channel utilization index is expressed as a
             percentage of mini-slots utilized on the physical channel,
             regardless of burst type.  For an Initial Maintenance
             region, the mini-slots for the complete region are
             considered utilized if the CMTS received an upstream
             burst within the region from any CM on the physical
             channel.  For contention REQ and REQ/DATA regions, the
             mini-slots for a transmission opportunity within the
             region are considered utilized if the CMTS received an
             upstream burst within the opportunity from any CM on the
             physical channel.  For all other regions, utilized
             mini-slots are those in which the CMTS granted
             bandwidth to any unicast SID on the physical channel.


             For an upstream interface that has multiple logical
             upstream channels enabled, the utilization index is a
             weighted sum of utilization indices for the logical
             channels.  The weight for each utilization index is the
             percentage of upstream mini-slots allocated for the
             corresponding logical channel.
             Example:
             If 75% of bandwidth is allocated to the first logical
             channel and 25% to the second, and the utilization
             indices for each are 60 and 40 respectively, the
             utilization index for the upstream physical channel is
             (60 * 0.75) + (40 * 0.25) = 55.  This figure
             applies to the most recent utilization interval.





Raftus/Cardona               Expires January 2005            [Page 88]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Downstream Channel Utilization Index:
             The downstream channel utilization index is a percentage
             expressing the ratio between bytes used to transmit data
             versus the total number of bytes transmitted in the raw
             bandwidth of the MPEG channel.  As with the upstream
             utilization index, the calculated value represents
             the most recent utilization interval.
             Formula:
             Downstream utilization index =
             (100 * (data bytes / raw bytes))


             Definitions:
             Data bytes:    Number of bytes transmitted as data in the
                            docsIfCmtsChannelUtilizationInterval.
                            Identical to docsIfCmtsDownChannelCtrUsed
                            Bytes measured over the utilization
                            interval.
             Raw bandwidth: Total number of bytes available for
                            transmitting data, not including bytes
                            used for headers and other overhead.
             Raw bytes:     (raw bandwidth *
                            docsIfCmtsChannelUtilizationInterval).
                            Identical to docsIfCmtsDownChannelCtrTotal
                            Bytes measured over the utilization
                            interval."


        ::= { docsIfCmtsChannelUtilizationEntry 3 }


-- The following table provides operators with input data appropriate
-- for calculating downstream channel utilization.  Operators may use
-- the docsIfCmtsChannelUtilizationTable, or perform their own polling
-- of the docsIfCmtsDownChannelCounterTable objects to characterize
-- their downstream channel usage.  The 32 bit counter objects are
-- included to provide backward compatibility with SNMPv1 managers,
-- which cannot access 64 bit counter objects.


docsIfCmtsDownChannelCounterTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsDownChannelCounterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table is implemented at the CMTS to collect
             downstream channel statistics for utilization
             calculations."
        ::= { docsIfCmtsObjects 10 }


docsIfCmtsDownChannelCounterEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsDownChannelCounterEntry
        MAX-ACCESS  not-accessible
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 89]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "An entry provides a list of traffic counters for a single
             downstream channel.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableDownstream(128)."
        INDEX { ifIndex }
        ::= { docsIfCmtsDownChannelCounterTable 1 }


DocsIfCmtsDownChannelCounterEntry ::= SEQUENCE {
            docsIfCmtsDownChnlCtrId              Integer32,
            docsIfCmtsDownChnlCtrTotalBytes      Counter32,
            docsIfCmtsDownChnlCtrUsedBytes       Counter32,
            docsIfCmtsDownChnlCtrExtTotalBytes   Counter64,
            docsIfCmtsDownChnlCtrExtUsedBytes    Counter64
        }


docsIfCmtsDownChnlCtrId OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The Cable Modem Termination System (CMTS) identification
             of the downstream channel within this particular MAC
             interface.  If the interface is down, the object returns
             the most current value.  If the downstream channel ID is
             unknown, this object returns a value of 0."
        ::= { docsIfCmtsDownChannelCounterEntry 1 }


docsIfCmtsDownChnlCtrTotalBytes OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "At the CMTS, the total number of bytes in the Payload
             portion of MPEG Packets (ie. not including MPEG header
             or pointer_field) transported by this downstream channel
             since CMTS initialization.  This is the 32 bit version of
             docsIfCmtsDownChnlCtrExtTotalBytes, included to provide
             back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsDownChannelCounterEntry 2 }


docsIfCmtsDownChnlCtrUsedBytes OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Bytes"
        MAX-ACCESS  read-only




Raftus/Cardona               Expires January 2005            [Page 90]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            "At the CMTS, the total number of DOCSIS data bytes
             transported by this downstream channel since CMTS
             initialization.  The number of data bytes is defined as
             the total number of bytes transported in DOCSIS payloads
             minus the number of stuff bytes transported in DOCSIS
             payloads.
             This is the 32 bit version of
             docsIfCmtsDownChnlCtrExtUsedBytes, included to provide
             back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsDownChannelCounterEntry 3 }


docsIfCmtsDownChnlCtrExtTotalBytes OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "Bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "At the CMTS, the total number of bytes in the Payload
             portion of MPEG Packets (ie. not including MPEG header
             or pointer_field) transported by this downstream channel
             since CMTS initialization.  This is the 64 bit version of
             docsIfCmtsDownChnlCtrTotalBytes, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsDownChannelCounterEntry 4 }


docsIfCmtsDownChnlCtrExtUsedBytes OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "Bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "At the CMTS, the total number of DOCSIS data bytes
             transported by this downstream channel since CMTS
             initialization.  The number of data bytes is defined as
             the total number of bytes transported in DOCSIS payloads
             minus the number of stuff bytes transported in DOCSIS
             payloads.
             This is the 64 bit version of
             docsIfCmtsDownChnlCtrUsedBytes, and will not be accessible
             to SNMPv1 managers.




Raftus/Cardona               Expires January 2005            [Page 91]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsDownChannelCounterEntry 5 }


-- The following table provides operators with input data appropriate
-- for calculating upstream channel utilization, and for determining
-- the traffic characteristics of upstream channels.  Operators may use
-- the docsIfCmtsChannelUtilizationTable, or perform their own polling
-- of the docsIfCmtsUpChannelCounterTable objects for utilization
-- determination.
-- The first four 32 and 64 objects in this table are mandatory.
-- Vendors may choose to implement the remaining optional objects to
-- provide operators with finer characterization of upstream channel
-- traffic patterns.  The 32 bit counter objects are included to provide
-- backward compatibility with SNMPv1 managers, which cannot access 64
-- bit counter objects.



docsIfCmtsUpChannelCounterTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfCmtsUpChannelCounterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table is implemented at the CMTS to provide upstream
             channel statistics appropriate for channel utilization
             calculations."
        ::= { docsIfCmtsObjects 11 }


docsIfCmtsUpChannelCounterEntry OBJECT-TYPE
        SYNTAX      DocsIfCmtsUpChannelCounterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "List of traffic statistics for a single upstream channel.
             For DOCSIS 2.0 CMTSs, an entry in this table
             exists for each ifEntry with an ifType of
             docsCableUpstreamChannel (205).
             For DOCSIS 1.x CMTSs, an entry in this table
             exists for each ifEntry with an ifType of
             docsCableUpstreamInterface (129)."
        INDEX { ifIndex }
        ::= { docsIfCmtsUpChannelCounterTable 1 }


DocsIfCmtsUpChannelCounterEntry ::= SEQUENCE {
            docsIfCmtsUpChnlCtrId                          Integer32,
            docsIfCmtsUpChnlCtrTotalMslots                 Counter32,
            docsIfCmtsUpChnlCtrUcastGrantedMslots          Counter32,
            docsIfCmtsUpChnlCtrTotalCntnMslots             Counter32,




Raftus/Cardona               Expires January 2005            [Page 92]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmtsUpChnlCtrUsedCntnMslots              Counter32,
            docsIfCmtsUpChnlCtrExtTotalMslots              Counter64,
            docsIfCmtsUpChnlCtrExtUcastGrantedMslots       Counter64,
            docsIfCmtsUpChnlCtrExtTotalCntnMslots          Counter64,
            docsIfCmtsUpChnlCtrExtUsedCntnMslots           Counter64,
            docsIfCmtsUpChnlCtrCollCntnMslots              Counter32,
            docsIfCmtsUpChnlCtrTotalCntnReqMslots          Counter32,
            docsIfCmtsUpChnlCtrUsedCntnReqMslots           Counter32,
            docsIfCmtsUpChnlCtrCollCntnReqMslots           Counter32,
            docsIfCmtsUpChnlCtrTotalCntnReqDataMslots      Counter32,
            docsIfCmtsUpChnlCtrUsedCntnReqDataMslots       Counter32,
            docsIfCmtsUpChnlCtrCollCntnReqDataMslots       Counter32,
            docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots    Counter32,
            docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots     Counter32,
            docsIfCmtsUpChnlCtrCollCntnInitMaintMslots     Counter32,
            docsIfCmtsUpChnlCtrExtCollCntnMslots           Counter64,
            docsIfCmtsUpChnlCtrExtTotalCntnReqMslots       Counter64,
            docsIfCmtsUpChnlCtrExtUsedCntnReqMslots        Counter64,
            docsIfCmtsUpChnlCtrExtCollCntnReqMslots        Counter64,
            docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots   Counter64,
            docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots    Counter64,
            docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots    Counter64,
            docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots Counter64,
            docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots  Counter64,
            docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots  Counter64
        }


docsIfCmtsUpChnlCtrId OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The CMTS identification of the upstream channel."
        ::= { docsIfCmtsUpChannelCounterEntry 1 }


docsIfCmtsUpChnlCtrTotalMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of all mini-slots
             defined for this upstream logical channel.  This count
             includes all IUCs and SIDs, even those allocated to the
             NULL SID for a 2.0 logical channel which is inactive.  This
             is the 32 bit version of docsIfCmtsUpChnlCtrExtTotalMslots
             and is included for back compatibility with SNMPv1
             managers.  Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other




Raftus/Cardona               Expires January 2005            [Page 93]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 2 }


docsIfCmtsUpChnlCtrUcastGrantedMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of unicast
             granted mini-slots on the upstream logical channel,
             regardless of burst type.  Unicast granted mini-slots are
             those in which the CMTS assigned bandwidth to any unicast
             SID on the logical channel.  However this object does not
             include minis-lots for reserved IUCs, or grants to SIDs
             designated as meaning 'no CM'.  This is the 32 bit version
             of docsIfCmtsUpChnlCtrExtUcastGrantedMslots, and is
             included for back compatibility with SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 3 }


docsIfCmtsUpChnlCtrTotalCntnMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             mini-slots defined for this upstream logical channel.  This
             count includes all mini-slots assigned to a broadcast or
             multicast SID on the logical channel.  This is the 32 bit
             version of docsIfCmtsUpChnlCtrExtTotalCntnMslots, and is
             included for back compatibility with SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 4 }


docsIfCmtsUpChnlCtrUsedCntnMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 94]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             mini-slots utilized on the upstream logical channel.  For
             contention regions, utilized mini-slots are those in which
             the CMTS correctly received an upstream burst from any CM
             on the upstream logical channel.  This is the 32 bit
             version of docsIfCmtsUpChnlCtrExtUsedCntnMslots, and is
             included for back compatibility with SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 5 }


docsIfCmtsUpChnlCtrExtTotalMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of all mini-slots
             defined for this upstream logical channel.  This count
             includes all IUCs and SIDs, even those allocated to the
             NULL SID for a 2.0 logical channel which is inactive.  This
             is the 64 bit version of docsIfCmtsUpChnlCtrTotalMslots,
             and will not be accessible to SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 6 }


docsIfCmtsUpChnlCtrExtUcastGrantedMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of unicast
             granted mini-slots on the upstream logical channel,
             regardless of burst type.  Unicast granted mini-slots are
             those in which the CMTS assigned bandwidth to any unicast
             SID on the logical channel.  However this object does not
             include mini-slots for reserved IUCs, or grants to SIDs
             designated as meaning 'no CM'.  This is the 64 bit version
             of docsIfCmtsUpChnlCtrUcastGrantedMslots, and will not be
             accessible to SNMPv1 managers.
             Support for this object is mandatory.




Raftus/Cardona               Expires January 2005            [Page 95]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 7 }


docsIfCmtsUpChnlCtrExtTotalCntnMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             mini-slots defined for this upstream logical channel.  This
             count includes all mini-slots assigned to a broadcast or
             multicast SID on the logical channel.  This is the 64 bit
             version of docsIfCmtsUpChnlCtrTotalCntnMslots, and will
             not be accessible to SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 8 }


docsIfCmtsUpChnlCtrExtUsedCntnMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             mini-slots utilized on the upstream logical channel.  For
             contention regions, utilized mini-slots are those in which
             the CMTS correctly received an upstream burst from any CM
             on the upstream logical channel.  This is the 64 bit
             version of docsIfCmtsUpChnlCtrUsedCntnMslots, and will not
             be accessible to SNMPv1 managers.
             Support for this object is mandatory.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 9 }


docsIfCmtsUpChnlCtrCollCntnMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current




Raftus/Cardona               Expires January 2005            [Page 96]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             mini-slots subjected to collisions on the upstream logical
             channel.  For contention regions, these are the mini-slots
             applicable to bursts that the CMTS detected, but could not
             correctly receive.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtCollCntnMslots, and is included for
             back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 10 }


docsIfCmtsUpChnlCtrTotalCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots defined for this upstream logical
             channel.  This count includes all mini-slots for IUC1
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtTotalCntnReqMslots, and is included
             for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 11 }


docsIfCmtsUpChnlCtrUsedCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots utilized on this upstream logical
             channel.  This count includes all contention mini-slots for
             IUC1 applicable to bursts that the CMTS correctly
             received.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtUsedCntnReqMslots, and is included
             for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."




Raftus/Cardona               Expires January 2005            [Page 97]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        ::= { docsIfCmtsUpChannelCounterEntry 12 }


docsIfCmtsUpChnlCtrCollCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots subjected to collisions on this upstream
             logical channel.  This includes all contention mini-slots
             for IUC1 applicable to bursts that the CMTS detected, but
             could not correctly receive.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtCollCntnReqMslots, and is included
             for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 13 }


docsIfCmtsUpChnlCtrTotalCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots defined for this upstream logical
             channel.  This count includes all mini-slots for IUC2
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots, and is
             included for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 14 }


docsIfCmtsUpChnlCtrUsedCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots utilized on this upstream logical
             channel.  This includes all contention mini-slots for IUC2
             applicable to bursts that the CMTS correctly received.




Raftus/Cardona               Expires January 2005            [Page 98]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots, and is
             included for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 15 }


docsIfCmtsUpChnlCtrCollCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots subjected to collisions on this
             upstream logical channel.  This includes all contention
             mini-slots for IUC2 applicable to bursts that the CMTS
             detected, but could not correctly receive.  This is the 32
             bit version of
             docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots, and is
             included for back compatibility with SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 16 }


docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             initial maintenance mini-slots defined for this upstream
             logical channel.  This includes all mini-slots for IUC3
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots,
             and is included for back compatibility with SNMPv1
             managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 17 }


docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots OBJECT-TYPE




Raftus/Cardona               Expires January 2005            [Page 99]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             initial maintenance mini-slots utilized on this upstream
             logical channel.  This includes all contention mini-slots
             for IUC3 applicable to bursts that the CMTS correctly
             received.  This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots,
             and is included for back compatibility with SNMPv1
             managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 18 }


docsIfCmtsUpChnlCtrCollCntnInitMaintMslots OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             initial maintenance mini-slots subjected to collisions on
             this upstream logical channel.  This includes all
             contention mini-slots for IUC3 applicable to bursts that
             the CMTS detected, but could not correctly receive.
             This is the 32 bit version of
             docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots,
             and is included for back compatibility with SNMPv1
             managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 19 }


docsIfCmtsUpChnlCtrExtCollCntnMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of collision
             contention mini-slots on the upstream logical channel.
             For contention regions, these are the mini-slots applicable
             to bursts that the CMTS detected, but could not correctly
             receive.  This is the 64 bit version of




Raftus/Cardona               Expires January 2005           [Page 100]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             docsIfCmtsUpChnlCtrCollCntnMslots, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 20 }


docsIfCmtsUpChnlCtrExtTotalCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots defined for this upstream logical
             channel.  This count includes all mini-slots for IUC1
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 64 bit version of
             docsIfCmtsUpChnlCtrTotalCntnReqMslots, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 21 }


docsIfCmtsUpChnlCtrExtUsedCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots utilized on this upstream logical
             channel.  This count includes all contention mini-slots for
             IUC1 applicable to bursts that the CMTS correctly
             received.  This is the 64 bit version of
             docsIfCmtsUpChnlCtrUsedCntnReqMslots, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 22 }


docsIfCmtsUpChnlCtrExtCollCntnReqMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only




Raftus/Cardona               Expires January 2005           [Page 101]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request mini-slots subjected to collisions on this upstream
             logical channel.  This includes all contention mini-slots
             for IUC1 applicable to bursts that the CMTS detected,
             but could not correctly receive.  This is the 64 bit
             version of docsIfCmtsUpChnlCtrCollCntnReqMslots, and will
             not be accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 23 }


docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots defined for this upstream logical
             channel.  This count includes all mini-slots for IUC2
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 64 bit version of
             docsIfCmtsUpChnlCtrTotalCntnReqDataMslots, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 24 }


docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots utilized on this upstream logical
             channel.  This includes all contention mini-slots for IUC2
             applicable to bursts that the CMTS correctly received.
             This is the 64 bit version of
             docsIfCmtsUpChnlCtrUsedCntnReqDataMslots, and will not be
             accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of




Raftus/Cardona               Expires January 2005           [Page 102]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 25 }


docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             request data mini-slots subjected to collisions on this
             upstream logical channel.  This includes all contention
             mini-slots for IUC2 applicable to bursts that the CMTS
             detected, but could not correctly receive.  This is the
             64 bit version of
             docsIfCmtsUpChnlCtrCollCntnReqDataMslots,
             and will not be accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 26 }


docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of initial
             maintenance mini-slots defined for this upstream logical
             channel.  This count includes all mini-slots for IUC3
             assigned to a broadcast or multicast SID on the logical
             channel.  This is the 64 bit version of
             docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots,
             and will not be accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 27 }


docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of initial
             maintenance mini-slots utilized on this upstream logical




Raftus/Cardona               Expires January 2005           [Page 103]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             channel.  This includes all contention mini-slots for IUC3
             applicable to bursts that the CMTS correctly received.
             This is the 64 bit version of
             docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots,
             and will not be accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 28 }


docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots OBJECT-TYPE
        SYNTAX      Counter64
        UNITS       "mini-slots"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current count, from CMTS initialization, of contention
             initial maintenance mini-slots subjected to collisions on
             this upstream logical channel.  This includes all
             contention mini-slots for IUC3 applicable to bursts that
             the CMTS detected, but could not correctly receive.
             This is the 64 bit version of
             docsIfCmtsUpChnlCtrCollCntnInitMaintMslots, and will not
             be accessible to SNMPv1 managers.
             Discontinuities in the value of this counter can occur
             at reinitialization of the managed system, and at other
             times as indicated by the value of
             ifCounterDiscontinuityTime for the associated ifIndex."
        ::= { docsIfCmtsUpChannelCounterEntry 29 }



--
-- notification group is for future extension.
--


docsIfNotification OBJECT IDENTIFIER     ::= { docsIfMib 2 }


--
-- MIB Compliance statements.
--


--
-- RFC 2670 Conformance definitions
--


docsIfConformance  OBJECT IDENTIFIER     ::= { docsIfMib 3 }
docsIfCompliances  OBJECT IDENTIFIER     ::= { docsIfConformance 1 }
docsIfGroups       OBJECT IDENTIFIER     ::= { docsIfConformance 2 }





Raftus/Cardona               Expires January 2005           [Page 104]

Internet Draft             DOCSIS RF Interface MIB          July 2004



--
-- RFC XXXX Conformance definitions
--
--    ************************************************************
--    * NOTES TO RFC Editor (to be removed prior to publication) *
--    *                                                          *
--    *  replace XXXX with the IANA assigned RFC number          *
--       of this document                                        *
--    *                                                          *
--    ************************************************************


docsIfCompliancesV2  OBJECT IDENTIFIER     ::= { docsIfConformance 3 }
docsIfGroupsV2       OBJECT IDENTIFIER     ::= { docsIfConformance 4 }


docsIfBasicCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION
            "The compliance statement for devices that implement
             MCNS/DOCSIS compliant Radio Frequency Interfaces."


MODULE  -- docsIfMib


-- unconditionally mandatory groups
MANDATORY-GROUPS {
        docsIfBasicGroup
        }


-- conditionally mandatory group
GROUP docsIfCmGroup
        DESCRIPTION
            "This group is implemented only in Cable Modems, not in
             Cable Modem Termination Systems."


-- conditionally mandatory group
GROUP docsIfCmtsGroup
        DESCRIPTION
            "This group is implemented only in Cable Modem Termination
             Systems, not in Cable Modems."


OBJECT  docsIfDownChannelFrequency
        WRITE-SYNTAX Integer32 (54000000..860000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems.  The values above are
             appropriate for a cable plant using a  Sub-Split channel
             plan.  If DOCSIS is extended to cover other types of
             channel plans (and frequency allocations) this object
             will be modified accordingly."





Raftus/Cardona               Expires January 2005           [Page 105]

Internet Draft             DOCSIS RF Interface MIB          July 2004



OBJECT  docsIfDownChannelWidth
        WRITE-SYNTAX Integer32 (6000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is conformant to implement this object as read-only.
             In Cable Modems, this object is always implemented as
             read-only.  The above value is appropriate for cable
             plants running under  NTSC (National Television
             Standards Committee) standards.  If DOCSIS is extended to
             work with other standard (e.g. European standards), this
             object will be modified accordingly."


OBJECT  docsIfDownChannelModulation
        WRITE-SYNTAX INTEGER {
                               qam64 (3),
                               qam256 (4)
                             }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfDownChannelInterleave
        WRITE-SYNTAX INTEGER {
                    taps8Increment16(3),
                    taps16Increment8(4),
                    taps32Increment4(5),
                    taps64Increment2(6),
                    taps128Increment1(7)
                     }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfDownChannelPower
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfUpChannelFrequency
        WRITE-SYNTAX Integer32 (5000000..42000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems.  The values above are
             appropriate for a cable plant using a  Sub-Split channel
             plan.  If DOCSIS is extended to cover other types of
             channel plans (and frequency allocations) this object




Raftus/Cardona               Expires January 2005           [Page 106]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             will be modified accordingly."


OBJECT  docsIfUpChannelWidth
        WRITE-SYNTAX Integer32 (200000..3200000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems.  The above value is appropriate
             for cable plants running under  NTSC (National Television
             Standards Committee) standards.  If DOCSIS is extended to
             work with other standard (e.g. European standards), this
             object will be modified accordingly."


OBJECT  docsIfUpChannelModulationProfile
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfUpChannelSlotSize
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfUpChannelRangingBackoffStart
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfUpChannelRangingBackoffEnd
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfUpChannelTxBackoffStart
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."


OBJECT  docsIfUpChannelTxBackoffEnd
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems;
             read-only in Cable Modems."





Raftus/Cardona               Expires January 2005           [Page 107]

Internet Draft             DOCSIS RF Interface MIB          July 2004



OBJECT  docsIfQosProfPriority
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxUpBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfGuarUpBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxDownBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxTxBurst
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfBaselinePrivacy
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfStatus
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfCmtsServiceAdminStatus




Raftus/Cardona               Expires January 2005           [Page 108]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsSyncInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsUcdInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsInsertInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsInvitedRangingAttempts
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsQosProfilePermissions
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT docsIfCmtsModType
        WRITE-SYNTAX INTEGER {
                        qpsk (2),
                        qam16 (3)
                         }
        DESCRIPTION
            "Management station MAY only set 16QAM or QPSK modulation,
             but others might be possible based on device
             configuration."


        ::= { docsIfCompliances 1 }


docsIfBasicComplianceV2 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "The compliance statement for devices that implement
             MCNS/DOCSIS compliant Radio Frequency Interfaces."


MODULE  -- docsIfMib


-- unconditionally mandatory groups




Raftus/Cardona               Expires January 2005           [Page 109]

Internet Draft             DOCSIS RF Interface MIB          July 2004



MANDATORY-GROUPS {
        docsIfBasicGroupV2
        }


-- conditionally mandatory group
GROUP docsIfCmGroupV2
        DESCRIPTION
            "This group is implemented only in Cable Modems, not in
             Cable Modem Termination Systems."


-- conditionally mandatory group
GROUP docsIfCmtsGroupV2
        DESCRIPTION
            "This group is implemented only in Cable Modem Termination
             Systems, not in Cable Modems."


-- Optional groups


GROUP docsIfCmtsOptionalGroupV2
        DESCRIPTION
            "This group is optional for Cable Modem Termination Systems,
             and not applicable for Cable Modems."


OBJECT  docsIfDownChannelFrequency
        WRITE-SYNTAX Integer32 (47000000..862000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems,
             read-only in Cable Modems.
             A range of 54MHz to 860MHz is appropriate for a cable
             plant using a North American Sub-Split channel plan.
             The spectrum range has been expanded to accommodate
             a lower edge of 47MHz and an upper edge of 862MHz
             for some European channel plans.
             If DOCSIS is extended to cover other types of channel
             plans (and frequency allocations) this object will be
             modified accordingly."


OBJECT  docsIfDownChannelWidth
        WRITE-SYNTAX Integer32 (6000000 | 8000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is conformant to implement this object as read-only.
             In Cable Modems, this object is always implemented as
             read-only.  The value of 6 MHz is appropriate for cable
             plants running under NTSC (National Television
             Standards Committee) standards.  The value of 8 MHz is
             appropriate for cable plants running under ETSI
             standards.  For other regional standards, this
             object will be modified accordingly."




Raftus/Cardona               Expires January 2005           [Page 110]

Internet Draft             DOCSIS RF Interface MIB          July 2004




OBJECT  docsIfDownChannelModulation
        WRITE-SYNTAX INTEGER {
                               qam64 (3),
                               qam256 (4)
                             }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfDownChannelInterleave
        WRITE-SYNTAX INTEGER {
                    taps8Increment16(3),
                    taps16Increment8(4),
                    taps32Increment4(5),
                    taps64Increment2(6),
                    taps128Increment1(7),
                    taps12increment17(8)
                     }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfDownChannelPower
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-write in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelFrequency
        WRITE-SYNTAX Integer32 (5000000..65000000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems.
             A range of 5MHz to 42MHz is appropriate for a cable
             plant using a North American Sub-Split channel plan.
             The spectrum range has been expanded to accommodate
             an upper edge of 65MHz for some European channel plans.
             If DOCSIS is extended to cover other types of channel
             plans (and frequency allocations) this object will
             be modified accordingly."


OBJECT  docsIfUpChannelWidth
        WRITE-SYNTAX Integer32 (200000..6400000)
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,




Raftus/Cardona               Expires January 2005           [Page 111]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             read-only in Cable Modems.  The above value is appropriate
             for cable plants running under  NTSC (National Television
             Standards Committee) standards.  If DOCSIS is extended to
             work with other standard (e.g. European standards), this
             object will be modified accordingly."


OBJECT  docsIfUpChannelModulationProfile
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelSlotSize
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfUpChannelRangingBackoffStart
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelRangingBackoffEnd
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelTxBackoffStart
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelTxBackoffEnd
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelScdmaActiveCodes
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems.
             The number of active codes when SCDMA is in use MUST range
             from 64 to 128, and MUST be a non-Prime value.




Raftus/Cardona               Expires January 2005           [Page 112]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             Providing this range allows for the following features
             and capabilities:
                1) Power management in S-CDMA spreader-on frames
                   (with a 3 dB spread)
                2) Avoidance of code 0
                3) Flexible mini-slot sizes with and without the use of
                   code 0"


OBJECT  docsIfUpChannelScdmaCodesPerSlot
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelScdmaFrameSize
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelScdmaHoppingSeed
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelCloneFrom
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelUpdate
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfUpChannelStatus
        SYNTAX      RowStatus {active(1), notReady(3)}
        WRITE-SYNTAX RowStatus {createAndWait(5), destroy(6)}
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems.
             Entries associated to upstream channels rows in ifTable
             only support read-only value active(1).
             Entries used for cloning purposes support values
             notReady(2), createAndWait(5) and destroy(6)."





Raftus/Cardona               Expires January 2005           [Page 113]

Internet Draft             DOCSIS RF Interface MIB          July 2004



OBJECT  docsIfUpChannelPreEqEnable
        MIN-ACCESS  read-only
        DESCRIPTION
            "Read-create in Cable Modem Termination Systems,
             read-only in Cable Modems."


OBJECT  docsIfQosProfPriority
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxUpBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfGuarUpBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxDownBandwidth
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfBaselinePrivacy
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfStatus
        MIN-ACCESS  read-only
        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfQosProfMaxTransmitBurst
        MIN-ACCESS  read-only




Raftus/Cardona               Expires January 2005           [Page 114]

Internet Draft             DOCSIS RF Interface MIB          July 2004



        DESCRIPTION
            "This object is always read-only in Cable Modems.
             It is compliant to implement this object as read-only
             in Cable Modem Termination Systems."


OBJECT  docsIfCmRangingTimeout
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsServiceAdminStatus
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsSyncInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsUcdInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsInsertInterval
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsInvitedRangingAttempts
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


OBJECT  docsIfCmtsQosProfilePermissions
        MIN-ACCESS  read-only
        DESCRIPTION
            "It is compliant to implement this object as read-only."


        ::= { docsIfCompliancesV2 1 }


docsIfBasicGroup OBJECT-GROUP
        OBJECTS {
            docsIfDownChannelId,
            docsIfDownChannelFrequency,
            docsIfDownChannelWidth,
            docsIfDownChannelModulation,
            docsIfDownChannelInterleave,
            docsIfDownChannelPower,




Raftus/Cardona               Expires January 2005           [Page 115]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfUpChannelId,
            docsIfUpChannelFrequency,
            docsIfUpChannelWidth,
            docsIfUpChannelModulationProfile,
            docsIfUpChannelSlotSize,
            docsIfUpChannelTxTimingOffset,
            docsIfUpChannelRangingBackoffStart,
            docsIfUpChannelRangingBackoffEnd,
            docsIfUpChannelTxBackoffStart,
            docsIfUpChannelTxBackoffEnd,
            docsIfQosProfPriority,
            docsIfQosProfMaxUpBandwidth,
            docsIfQosProfGuarUpBandwidth,
            docsIfQosProfMaxDownBandwidth,
            docsIfQosProfMaxTxBurst,
            docsIfQosProfBaselinePrivacy,
            docsIfQosProfStatus,
            docsIfSigQIncludesContention,
            docsIfSigQUnerroreds,
            docsIfSigQCorrecteds,
            docsIfSigQUncorrectables,
            docsIfSigQSignalNoise,
            docsIfSigQMicroreflections,
            docsIfSigQEqualizationData
        }
        STATUS      deprecated
        DESCRIPTION
            "Group of objects implemented in both Cable Modems and
             Cable Modem Termination Systems."
        ::= { docsIfGroups 1 }


docsIfCmGroup OBJECT-GROUP
        OBJECTS {
            docsIfCmCmtsAddress,
            docsIfCmCapabilities,
            docsIfCmRangingTimeout,
            docsIfCmStatusValue,
            docsIfCmStatusCode,
            docsIfCmStatusTxPower,
            docsIfCmStatusResets,
            docsIfCmStatusLostSyncs,
            docsIfCmStatusInvalidMaps,
            docsIfCmStatusInvalidUcds,
            docsIfCmStatusInvalidRangingResponses,
            docsIfCmStatusInvalidRegistrationResponses,
            docsIfCmStatusT1Timeouts,
            docsIfCmStatusT2Timeouts,
            docsIfCmStatusT3Timeouts,
            docsIfCmStatusT4Timeouts,
            docsIfCmStatusRangingAborteds,




Raftus/Cardona               Expires January 2005           [Page 116]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmServiceQosProfile,
            docsIfCmServiceTxSlotsImmed,
            docsIfCmServiceTxSlotsDed,
            docsIfCmServiceTxRetries,
            docsIfCmServiceTxExceededs,
            docsIfCmServiceRqRetries,
            docsIfCmServiceRqExceededs
        }
        STATUS      deprecated
        DESCRIPTION
            "Group of objects implemented in Cable Modems."
        ::= { docsIfGroups 2 }


docsIfCmtsGroup OBJECT-GROUP
        OBJECTS {
            docsIfCmtsCapabilities,
            docsIfCmtsSyncInterval,
            docsIfCmtsUcdInterval,
            docsIfCmtsMaxServiceIds,
            docsIfCmtsInvitedRangingAttempts,
            docsIfCmtsInsertInterval,
            docsIfCmtsStatusInvalidRangeReqs,
            docsIfCmtsStatusRangingAborteds,
            docsIfCmtsStatusInvalidRegReqs,
            docsIfCmtsStatusFailedRegReqs,
            docsIfCmtsStatusInvalidDataReqs,
            docsIfCmtsStatusT5Timeouts,
            docsIfCmtsCmStatusMacAddress,
            docsIfCmtsCmStatusIpAddress,
            docsIfCmtsCmStatusDownChannelIfIndex,
            docsIfCmtsCmStatusUpChannelIfIndex,
            docsIfCmtsCmStatusRxPower,
            docsIfCmtsCmStatusTimingOffset,
            docsIfCmtsCmStatusEqualizationData,
            docsIfCmtsCmStatusValue,
            docsIfCmtsCmStatusUnerroreds,
            docsIfCmtsCmStatusCorrecteds,
            docsIfCmtsCmStatusUncorrectables,
            docsIfCmtsCmStatusSignalNoise,
            docsIfCmtsCmStatusMicroreflections,
            docsIfCmtsServiceCmStatusIndex,
            docsIfCmtsServiceAdminStatus,
            docsIfCmtsServiceQosProfile,
            docsIfCmtsServiceCreateTime,
            docsIfCmtsServiceInOctets,
            docsIfCmtsServiceInPackets,
            docsIfCmtsModType,
            docsIfCmtsModControl,
            docsIfCmtsModPreambleLen,
            docsIfCmtsModDifferentialEncoding,




Raftus/Cardona               Expires January 2005           [Page 117]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmtsModFECErrorCorrection,
            docsIfCmtsModFECCodewordLength,
            docsIfCmtsModScramblerSeed,
            docsIfCmtsModMaxBurstSize,
            docsIfCmtsModGuardTimeSize,
            docsIfCmtsModLastCodewordShortened,
            docsIfCmtsModScrambler,
            docsIfCmtsQosProfilePermissions,
            docsIfCmtsCmPtr
        }
        STATUS      deprecated
        DESCRIPTION
            "Group of objects implemented in Cable Modem Termination
             Systems."
        ::= { docsIfGroups 3 }


docsIfObsoleteGroup OBJECT-GROUP
        OBJECTS {
            docsIfCmRangingRespTimeout,
            docsIfCmtsInsertionInterval
        }
        STATUS      obsolete
        DESCRIPTION
            "Group of objects obsoleted."
        ::= { docsIfGroups 5 }


docsIfBasicGroupV2 OBJECT-GROUP
        OBJECTS {
            docsIfDownChannelId,
            docsIfDownChannelFrequency,
            docsIfDownChannelWidth,
            docsIfDownChannelModulation,
            docsIfDownChannelInterleave,
            docsIfDownChannelPower,
            docsIfDownChannelAnnex,
            docsIfUpChannelId,
            docsIfUpChannelFrequency,
            docsIfUpChannelWidth,
            docsIfUpChannelModulationProfile,
            docsIfUpChannelSlotSize,
            docsIfUpChannelTxTimingOffset,
            docsIfUpChannelRangingBackoffStart,
            docsIfUpChannelRangingBackoffEnd,
            docsIfUpChannelTxBackoffStart,
            docsIfUpChannelTxBackoffEnd,
            docsIfUpChannelScdmaActiveCodes,
            docsIfUpChannelScdmaCodesPerSlot,
            docsIfUpChannelScdmaFrameSize,
            docsIfUpChannelScdmaHoppingSeed,
            docsIfUpChannelType,




Raftus/Cardona               Expires January 2005           [Page 118]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfUpChannelCloneFrom,
            docsIfUpChannelUpdate,
            docsIfUpChannelStatus,
            docsIfUpChannelPreEqEnable,
            docsIfQosProfPriority,
            docsIfQosProfMaxUpBandwidth,
            docsIfQosProfGuarUpBandwidth,
            docsIfQosProfMaxDownBandwidth,
            docsIfQosProfBaselinePrivacy,
            docsIfQosProfStatus,
            docsIfQosProfMaxTransmitBurst,
            docsIfSigQIncludesContention,
            docsIfSigQUnerroreds,
            docsIfSigQCorrecteds,
            docsIfSigQUncorrectables,
            docsIfSigQSignalNoise,
            docsIfSigQMicroreflections,
            docsIfSigQEqualizationData,
            docsIfSigQExtUnerroreds,
            docsIfSigQExtCorrecteds,
            docsIfSigQExtUncorrectables,
            docsIfDocsisBaseCapability
        }
        STATUS      current
        DESCRIPTION
            "Group of objects implemented in both Cable Modems and
             Cable Modem Termination Systems."
        ::= { docsIfGroupsV2 1 }


docsIfCmGroupV2 OBJECT-GROUP
        OBJECTS {
            docsIfCmCmtsAddress,
            docsIfCmCapabilities,
            docsIfCmRangingTimeout,
            docsIfCmStatusValue,
            docsIfCmStatusCode,
            docsIfCmStatusTxPower,
            docsIfCmStatusResets,
            docsIfCmStatusLostSyncs,
            docsIfCmStatusInvalidMaps,
            docsIfCmStatusInvalidUcds,
            docsIfCmStatusInvalidRangingResponses,
            docsIfCmStatusInvalidRegistrationResponses,
            docsIfCmStatusT1Timeouts,
            docsIfCmStatusT2Timeouts,
            docsIfCmStatusT3Timeouts,
            docsIfCmStatusT4Timeouts,
            docsIfCmStatusRangingAborteds,
            docsIfCmStatusDocsisOperMode,
            docsIfCmStatusModulationType,




Raftus/Cardona               Expires January 2005           [Page 119]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmStatusEqualizationData,
            docsIfCmStatusUCCs,
            docsIfCmStatusUCCFails,
            docsIfCmServiceQosProfile,
            docsIfCmServiceTxSlotsImmed,
            docsIfCmServiceTxSlotsDed,
            docsIfCmServiceTxRetries,
            docsIfCmServiceTxExceededs,
            docsIfCmServiceRqRetries,
            docsIfCmServiceRqExceededs,
            docsIfCmServiceExtTxSlotsImmed,
            docsIfCmServiceExtTxSlotsDed


        }
        STATUS      current
        DESCRIPTION
            "Group of objects implemented in Cable Modems."
        ::= { docsIfGroupsV2 2 }


docsIfCmtsGroupV2 OBJECT-GROUP
        OBJECTS {
            docsIfCmtsCapabilities,
            docsIfCmtsSyncInterval,
            docsIfCmtsUcdInterval,
            docsIfCmtsMaxServiceIds,
            docsIfCmtsInvitedRangingAttempts,
            docsIfCmtsInsertInterval,
            docsIfCmtsMacStorageType,
            docsIfCmtsStatusInvalidRangeReqs,
            docsIfCmtsStatusRangingAborteds,
            docsIfCmtsStatusInvalidRegReqs,
            docsIfCmtsStatusFailedRegReqs,
            docsIfCmtsStatusInvalidDataReqs,
            docsIfCmtsStatusT5Timeouts,
            docsIfCmtsCmStatusMacAddress,
            docsIfCmtsCmStatusDownChannelIfIndex,
            docsIfCmtsCmStatusUpChannelIfIndex,
            docsIfCmtsCmStatusRxPower,
            docsIfCmtsCmStatusTimingOffset,
            docsIfCmtsCmStatusEqualizationData,
            docsIfCmtsCmStatusValue,
            docsIfCmtsCmStatusUnerroreds,
            docsIfCmtsCmStatusCorrecteds,
            docsIfCmtsCmStatusUncorrectables,
            docsIfCmtsCmStatusSignalNoise,
            docsIfCmtsCmStatusMicroreflections,
            docsIfCmtsCmStatusExtUnerroreds,
            docsIfCmtsCmStatusExtCorrecteds,
            docsIfCmtsCmStatusExtUncorrectables,
            docsIfCmtsCmStatusDocsisRegMode,




Raftus/Cardona               Expires January 2005           [Page 120]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfCmtsCmStatusModulationType,
            docsIfCmtsCmStatusInetAddressType,
            docsIfCmtsCmStatusInetAddress,
            docsIfCmtsCmStatusValueLastUpdate,
            docsIfCmtsCmStatusHighResolutionTimingOffset,
            docsIfCmtsServiceAdminStatus,
            docsIfCmtsServiceQosProfile,
            docsIfCmtsServiceCreateTime,
            docsIfCmtsServiceInOctets,
            docsIfCmtsServiceInPackets,
            docsIfCmtsServiceNewCmStatusIndex,
            docsIfCmtsModType,
            docsIfCmtsModControl,
            docsIfCmtsModPreambleLen,
            docsIfCmtsModDifferentialEncoding,
            docsIfCmtsModFECErrorCorrection,
            docsIfCmtsModFECCodewordLength,
            docsIfCmtsModScramblerSeed,
            docsIfCmtsModMaxBurstSize,
            docsIfCmtsModGuardTimeSize,
            docsIfCmtsModLastCodewordShortened,
            docsIfCmtsModScrambler,
            docsIfCmtsModByteInterleaverDepth,
            docsIfCmtsModByteInterleaverBlockSize,
            docsIfCmtsModPreambleType,
            docsIfCmtsModTcmErrorCorrectionOn,
            docsIfCmtsModScdmaInterleaverStepSize,
            docsIfCmtsModScdmaSpreaderEnable,
            docsIfCmtsModScdmaSubframeCodes,
            docsIfCmtsModChannelType,
            docsIfCmtsModStorageType,
            docsIfCmtsQosProfilePermissions,
            docsIfCmtsCmPtr,
            docsIfCmtsChannelUtilizationInterval,
            docsIfCmtsChannelUtUtilization,
            docsIfCmtsDownChnlCtrId,
            docsIfCmtsDownChnlCtrTotalBytes,
            docsIfCmtsDownChnlCtrUsedBytes,
            docsIfCmtsDownChnlCtrExtTotalBytes,
            docsIfCmtsDownChnlCtrExtUsedBytes,
            docsIfCmtsUpChnlCtrId,
            docsIfCmtsUpChnlCtrTotalMslots,
            docsIfCmtsUpChnlCtrUcastGrantedMslots,
            docsIfCmtsUpChnlCtrTotalCntnMslots,
            docsIfCmtsUpChnlCtrUsedCntnMslots,
            docsIfCmtsUpChnlCtrExtTotalMslots,
            docsIfCmtsUpChnlCtrExtUcastGrantedMslots,
            docsIfCmtsUpChnlCtrExtTotalCntnMslots,
            docsIfCmtsUpChnlCtrExtUsedCntnMslots,
            docsIfDownChannelStorageType,




Raftus/Cardona               Expires January 2005           [Page 121]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            docsIfQosProfStorageType


        }
        STATUS      current
        DESCRIPTION
            "Group of objects implemented in Cable Modem Termination
             Systems."
        ::= { docsIfGroupsV2 3 }


docsIfCmtsOptionalGroupV2 OBJECT-GROUP
        OBJECTS {
            docsIfCmtsUpChnlCtrCollCntnMslots,
            docsIfCmtsUpChnlCtrTotalCntnReqMslots,
            docsIfCmtsUpChnlCtrUsedCntnReqMslots,
            docsIfCmtsUpChnlCtrCollCntnReqMslots,
            docsIfCmtsUpChnlCtrTotalCntnReqDataMslots,
            docsIfCmtsUpChnlCtrUsedCntnReqDataMslots,
            docsIfCmtsUpChnlCtrCollCntnReqDataMslots,
            docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots,
            docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots,
            docsIfCmtsUpChnlCtrCollCntnInitMaintMslots,
            docsIfCmtsUpChnlCtrExtCollCntnMslots,
            docsIfCmtsUpChnlCtrExtTotalCntnReqMslots,
            docsIfCmtsUpChnlCtrExtUsedCntnReqMslots,
            docsIfCmtsUpChnlCtrExtCollCntnReqMslots,
            docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots,
            docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots,
            docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots,
            docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots,
            docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots,
            docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots
        }
        STATUS      current
        DESCRIPTION
            "Group of objects implemented optionally in Cable Modem
             Termination Systems."
        ::= { docsIfGroupsV2 4 }


END



5.  Acknowledgments


    This document is a production of the IPCDN working group based on
    Contributions from numerous members of the CableLabs DOCSIS 2.0
    OSS Working Group.
    It is a revision of RFC 2670, "Radio Frequency (RF)
    Interface Management Information Base for DOCSIS compliant RF
    interfaces" [RFC2670].





Raftus/Cardona               Expires January 2005           [Page 122]

Internet Draft             DOCSIS RF Interface MIB          July 2004



    The authors and editor wishes to express gratitude to Rich Prodan,
    Aviv Goren, Greg Nakanishi, Rich Woundy, Andr‰ Lejeune, Adi Shaliv,
    Greg White, Dan Rice, Minnie Lu, and Jean-Francois Mule for their
    valued advice and opinions.



6.  Revision History


6.1. Scope


     The MIB module in this document has been developed to accommodate
     DOCSIS 2.0 devices and their system capabilities.  The MIB module
     is an update to RFC 2670 with the additional incorporation of
     DOCSIS and Euro-DOCSIS specification requirements.


6.2. Extension


     We have maintained the MIB objects as defined in RFC 2670.  In some
     cases new MIB objects have been created with identical
     functionality but greater capacity (i.e. 32 to 64 bits).  In these
     situations, both the original 32 bit objects and the new 64 bit
     objects must be implemented.



7.  Normative References


   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.


   [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Structure of Management
             Information Version 2 (SMIv2)", STD 58, RFC 2578, April
             1999.


   [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Textual Conventions for
             SMIv2", STD 58, RFC 2579, April 1999.


   [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Conformance Statements for
             SMIv2", RFC 2580, STD 58, April 1999.



   [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
             MIB", RFC 2863, June 2000.


   [RFC3291] Daniele, M., Haberman, B., Routhier, S., Schoenwaelder,
             J., "Textual Conventions for Internet Network Addresses",
             RFC 3291, May 2002.





Raftus/Cardona               Expires January 2005           [Page 123]

Internet Draft             DOCSIS RF Interface MIB          July 2004



    ************************************************************
    * NOTES TO RFC Editor (to be removed prior to publication) *
    *                                                          *
    *     The I-D <draft-ietf-ops-rfc3291bis-02.txt> (or a     *
    * successor) is expected to eventually replace RFC 3291.   *
    * If that draft (or a successor) is published as an RFC    *
    * prior to or concurrently with this document, then the    *
    * normative reference [RFC3291] should be updated to       *
    * point to the replacement RFC.                            *
    *                                                          *
    ************************************************************


   [IANA]    "Protocol Numbers and Assignment Services", IANA,
             http://www.iana.org/assignments/ianaiftype-mib


   [EN 300 429] ETSI Standard EN 300 429, Version 1.2.1: Digital Video
                Broadcasting   (DVB), Framing structure, channel coding
                and modulation for cable systems, April 1998.


   [ITU-T J83] ITU-T Recommendation J.83(4/97), "Digital
                multi-programme systems for television sound and data
                services for cable distribution.", ITU, Apr 1997,
                http://www.itu.int/ITU-T/studygroups/com09/


   [RFI2.0] "Data-Over-Cable Service Interface Specifications: Radio
            Frequency Interface Specification SP-RFIv2.0-I05-040407",
            DOCSIS 2.0, April 2004,
             http://www.cablemodem.com/specifications/


   [ITU-T J112] Transmission Systems for Interactive Cable Television
                 Services, Annex B,ITU-T, March 2001
   [ITU-T-J122] Second-Generation Transmission Systems for Interactive
                Cable Television Services, J.122, ITU-T, December, 2002.



8.  Informative References


   [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
             "Introduction and Applicability Statements for
             Internet-Standard Management Framework", RFC 3410,
             December 2002.


   [RFI1.0] "Data-Over-Cable Service Interface Specifications: DOCSIS
            1.0
             Radio Frequency Interface (RFI) ANSI/SCTE 22-1 2002",
             http://www.scte.org/standards/.


   [OSSI2.0] "Data-Over-Cable Service Interface Specifications:
             Operations Support System Interface Specification
             SP-OSSIv2.0-I05-040407", DOCSIS 2.0 April 2004,




Raftus/Cardona               Expires January 2005           [Page 124]

Internet Draft             DOCSIS RF Interface MIB          July 2004



             http://www.cablemodem.com/specifications/


   [OSSI1.1] "Data-Over-Cable Service Interface Specifications:
             Operations Support System Interface Specification
             SP-OSSIv1.1-I07-030730", DOCSIS 1.1 July 2003,
             http://www.cablemodem.com/specifications/


   [BPI] "Data-Over-Cable Service Interface Specifications: DOCSIS
         1.0 Baseline Privacy Interface Specification SCTE 22-2 2002",
         SCTE Data Standards Subcommittee, 2002,
         http://www.scte.org/standards/.


   [BPIPLUS] "Data-Over-Cable Service Interface Specifications:
             Baseline Privacy Plus Interface Specification
             BPI+_I11-040407", CableLabs, April 2004,
             http://www.cablemodem.com/specifications/


   [Proakis00] Proakis, John G., "Digital Communications, 4th Edition",
       McGraw-Hill, New York, New York, 2000, ISBN 0-07-232111-3



9.  Security Considerations


   This MIB module relates to a system which will provide metropolitan
   public internet access.  As such, improper manipulation of the MIB
   objects represented by this MIB module may result in denial of
   service to a large number of end-users.


   There are a number of management objects defined in this MIB that
   have a MAX-ACCESS clause of read-write or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.


   In the CM case the only read-write object is docsIfCmRangingTimeout,
   which if maliciously SET may not constitute a critical factor of the
   service degradation.
   The rest of the CM required MIB objects in this MIB module are
   read-only by the MIB definitions or by CM compliance statements, the
   majority of those MIB objects are controlled by the CMTS.  Therefore,
   write access to the CMTS MIB objects may compromise the services
   offering as defined below.


   The CMTS is the controller of most of the parameters of the DOCSIS
   RFI Interface, These are the tables and their sensitivity/
   vulnerability:


       o    Objects in the docsIfBasicGroupv2 if SET maliciously by an
            attacker could result in a denial of service either by




Raftus/Cardona               Expires January 2005           [Page 125]

Internet Draft             DOCSIS RF Interface MIB          July 2004



            service disruption or degradation.  Particularly SETs in
            objects of tables docsIfDownstreamChannelTable,
            docsIfUpstreamChannelTable, docsIfCmtsModulationTable and
            docsIfQosProfileTable (the last one in conjunction with
            MIB object docsIfCmtsQosProfilePermissions) can alter
            negatively the physical and link layers parameters for
            upstream and downstream channels.


       o    The Object docsIfCmtsServiceAdminStatus of the
            docsIfCmtsGroupv2 group when SET maliciously by an
            attacker to 'destroyed' could interrupt temporarily a cable
            modem service by removing its entry in
            docsifCmtsServiceTable.


   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:


       o   Read access to the MIB objects in tables docsIfCmStatusTable
           (CM), docsIfSignalQualityTable (CM/CMTS) and mainly CMTS
           tables docsIfCmtsCmStatusTable,
           docsIfCmtsChannelUtilizationTable,
           docsIfCmtsDownChannelCounterTable and
           docsIfCmtsUpChannelCounterTable as well as all the tables
           described above, could reveal information about the cable
           modems distribution among the upstream and downstream
           channels and their performance which could be used to gain
           access to a different tiered service offer.
           The table docsIfCmtsCmStatusTable also contain the MAC and IP
           addresses of the cable modems that cam be used of thief of
           service and IP spoofing.


   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.


   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).


   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator




Raftus/Cardona               Expires January 2005           [Page 126]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.



10.  Changes from RFC 2670


   Upstream now separated into 'physical interfaces' and 'logical
   channels'.  An instance of the docsIfUpstreamChannelTable exists
   for each 'logical channel'.  The IANA ifType for 'logical channels'
   is 205.  The IANA ifType for 'physical interfaces' remains at 129.


   Object docsIfDownChannelAnnex added to
   docsIfDownstreamChannelTable.  This object originated in the
   Euro-DOCSIS specifications.


   Nine new objects added to the docsIfUpstreamChannelTable.  One
   describes the channel type in use.  Four are specific S-CDMA
   parameters.  Three are used in the creation of a temporary
   inactive upstream row so the channel parameters may be
   manipulated'offline'.
   One object has been added to enable/disable
   pre-equalization on the upstream channel.


   Object docsIfQosProfMaxTransmitBurst has been added to the
   docsIfQosProfileTable to replace deprecated object
   docsIfQosProfMaxTxBurst.  This fixes a range error caused by switch
   to recording as bytes instead of mini-slots.


   Three new 64 bit counters added to the docsIfSignalQualityTable to
   extend the capacity of existing 32 bit counters.


   A new base object docsIfDocsisBaseCapability has been added which
   mirrors the functionality of the DOCSIS specification [OSSI2.0]
   defined MIB object docsIfDocsisCapability, extended to include
   DOCSIS 2.0.


   Five new objects added to the docsIfCmStatusTable.  One indicates
   the current modulation type.  The second mirrors the functionality
   of the DOCSIS specification [OSSI2.0] defined MIB object
   docsIfDocsisOperMode, while clarifying that it applies to the COS/QOS
   mode used by the device.  The third new object indicates equalization
   data at the CM.  Last two objects indicates total and failed UCC
   transactions.


   Two new 64 bit counters added to the docsIfCmServiceTable to extend
   the capacity of existing 32 bit counters.


   Nine new objects added to the docsIfCmtsCmStatusTable.  Three are




Raftus/Cardona               Expires January 2005           [Page 127]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   64 bit counters, two add ipv6 capability, one indicates the CM
   modulation type in use, one indicates the last update time for the
   status value, one is a high resolution of the timing offset MIB
   object.
   The remaining object mirrors the functionality of the DOCSIS
   specification [OSSI2.0] defined MIB object
   docsIfCmtsCmStatusDocsisMode, while clarifying that it applies to
   the COS/QOS mode used by the device.


   One object added to the docsIfCmtsServiceTable to fix a range error
   in an existing object, that has been deprecated.


   Eight new objects added to the docsIfCmtsModulationTable.  Seven of
   these describe ATDMA/S-CDMA channel parameters, while the other
   describes modulation attributes common to all modulation types.


   One new object and three new tables added to provide CMTS upstream
   and downstream channel utilization data.


   Enumerated values for object docsIfDownChannelInterleave have been
   expanded to include a Euro-DOCSIS value.


   Enumerated values for object docsIfCmtsModIntervalUsageCode have
   been expanded to include new DOCSIS 2.0 values.


   Enumerated values for object docsIfCmtsModType have been expanded
   to include new DOCSIS 2.0 values.


   Compliance statements have been updated to reflect new objects and
   to describe Euro-DOCSIS specific implementation features.


   The descriptions of objects docsIfCmtsStatusInvalidRegReqs and
   docsIfCmtsStatusFailedRegReqs have been clarified.


   Separated references into normative and informative.


   One object added to the docsIfCmtsModulationTable to indicate
   storage type of the table entries to differentiate factory and
   user configuration.


   General persistence statements for read-create and read-write
   objects.


   Updated DESCRIPTION and and UNITS clauses for object
   docsIfSigQMicroreflections.


   Corrected DESCRIPTION clause of object docsIfCmStatusValue.


   Updated IPR Notice and Disclosure to RFC 3667 section 5.1 and
   RFC 3668 as well as Copyright to RFC 3667 sections 5.4 and 5.5.




Raftus/Cardona               Expires January 2005           [Page 128]

Internet Draft             DOCSIS RF Interface MIB          July 2004





11.  Management Interoperability of DOCSIS 1.0, 1.1 and 2.0


   The MIB module contained in this document updates RFC 2670, primarily
   to handle the management requirements of the DOCSIS RF Interface of
   DOCSIS 2.0 [ITU-T-J122]. RFC 2670 contains the DOCSIS RF Interface
   management requirements for DOCSIS 1.0 and DOCSIS 1.1.


   The management requirements of Class of Service (DOCSIS 1.0) pertain
   to RFC 2670 are the same as this document update and are contained
   in tables docsIfQosProfileTable, docsIfCmServiceTable and
   docsIfCmtsServiceTable.


   DOCSIS 1.1 and DOCSIS 2.0 Quality of Service management requirements
   are defined in the DOCSIS management specifications [OSSI1.1] and
   [OSSI2.0] respectively.



12.  Intellectual Property



   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed
   to pertain to the implementation or use of the technology
   described in this document or the extent to which any license
   under such rights might or might not be available; nor does it
   represent that it has made any independent effort to identify any
   such rights.  Information on the procedures with respect to rights
   in RFC documents can be found in BCP 78 and BCP 79.


   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use
   of such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository
   at http://www.ietf.org/ipr.


   The IETF invites any interested party to bring to its attention
   any copyrights, patents or patent applications, or other
   proprietary rights that may cover technology that may be required
   to implement this standard.  Please address the information to the
   IETF at ietf-ipr@ietf.org.




13.  Author's Address


   David Raftus
   Terayon Canada Ltd




Raftus/Cardona               Expires January 2005           [Page 129]

Internet Draft             DOCSIS RF Interface MIB          July 2004



   340 Terry Fox Drive, Suite 202
   Ottawa Ontario
   Canada
   Phone:  +1 613 592 1052 ext 222
   E-mail: david.raftus@terayon.com


   Eduardo Cardona
   Cable Television Laboratories, Inc.
   858 Coal Creek Circle
   Louisville, CO 80027-9750
   U.S.A.
   Phone: +1 303 661 9100
   E-mail: e.cardona@cablelabs.com



14. Disclaimer of Validity


   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.



15. Copyright Notice


   Copyright (C) The Internet Society (2004).  This document is
   subject to the rights, licenses and restrictions contained in BCP
   78, and except as set forth therein, the authors retain all their
   rights.



Acknowledgment
   Funding for the RFC Editor function is currently provided by the
   Internet Society.














Raftus/Cardona               Expires January 2005           [Page 130]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/