[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 02 03 04 RFC 4113

IPv6 MIB Revision Design Team                                  B. Fenner
Internet-Draft                                     AT&T Labs -- Research
Expires: April 18, 2005                                         J. Flick
                                                 Hewlett-Packard Company
                                                        October 18, 2004


    Management Information Base for the User Datagram Protocol (UDP)
                   draft-ietf-ipv6-rfc2013-update-04

Status of this Memo

   This document is an Internet-Draft and is subject to all provisions
   of section 3 of RFC 3667.  By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she become aware will be disclosed, in accordance with
   RFC 3668.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on April 18, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2004).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects used for implementations
   of the User Datagram Protocol (UDP) in an IP version independent
   manner.  This memo obsoletes RFCs 2013 and 2454.




Fenner & Flick           Expires April 18, 2005                 [Page 1]

Internet-Draft                  UDP MIB                     October 2004


Table of Contents

   1.  Revision History . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  7
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
     3.1   Relationship to Other MIBs . . . . . . . . . . . . . . . .  8
       3.1.1   Relationship to RFC1213-MIB  . . . . . . . . . . . . .  8
       3.1.2   Relationship to the IPV6-UDP-MIB . . . . . . . . . . .  8
       3.1.3   Relationship to HOST-RESOURCES-MIB and SYSAPPL-MIB . .  8
   4.  Definitions  . . . . . . . . . . . . . . . . . . . . . . . . .  9
   5.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 20
   6.  Contributers . . . . . . . . . . . . . . . . . . . . . . . . . 20
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 21
   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 22
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 22
   9.1   Normative References . . . . . . . . . . . . . . . . . . . . 22
   9.2   Informative References . . . . . . . . . . . . . . . . . . . 23
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 23
       Intellectual Property and Copyright Statements . . . . . . . . 25
































Fenner & Flick           Expires April 18, 2005                 [Page 2]

Internet-Draft                  UDP MIB                     October 2004


1.  Revision History

   [Note to RFC Editor: Please remove prior to publication]

   Changes from draft-ietf-ipv6-rfc2013-update-02.txt

   18 October 2004 - IETF Last Call comments

      Updated reference to RFC3291 to refer to 3291bis internet-draft.

      Updated DESCRIPTION clause of the most recent REVISION clause to
      reflect the changes that have been made since RFC 2013.

      Updated DESCRIPTION clause of least recent REVISION clause to
      reflect that MIB-II was published as RFC 1213.

      Added pseudo OBJECT clauses to the description of
      udpMIBCompliance2 for udpEndpointLocalAddress and
      udpEndpointRemoteAddress.

      Updated Overview section so that all references are cited.

      Moved references to RFC 2287 and RFC 2790 from Normative
      References to Informative References, since they are not actually
      required for implementation, and we don't want advancement of this
      document to be blocked.

      Removed use of zero-length addresses to represent wildcard
      listeners when the version is specified.  Instead, use zero valued
      addresses of the appropriate length.  Updated udpEndpointTable and
      udpEndpointLocalAddress DESCRIPTION clauses to reflect this.

      Added IANA Considerations section.

      Updated IPR boilerplate.

   Changes from draft-ietf-ipv6-rfc2013-update-02.txt

   27 April 2004

      Added text to section 2.1.2 to clarify why an equivalent to RFC
      2454's ipv6UdpIfIndex is not required.

      Changed the text of the Security Considerations so that it no
      longer implies that udpEndpointLocalPort is readable, but is
      instead only returned as part of an index.

      Added an explicit reference to sysUpTime as a discontinuity



Fenner & Flick           Expires April 18, 2005                 [Page 3]

Internet-Draft                  UDP MIB                     October 2004


      indicator to the counter objects in the mib.

      Reworded the description of udpEndpointLocalAddress to indicate
      that it can be used to represent any address that the local system
      is listening to, not just addresses assigned to the system.

      Updated the description of InetAddress objects used as index
      elements to indicate the 128 octet limit.

      Added a note to the description of udpEndpointRemoteAddressType to
      indicate that some combinations of udpEndpointLocalAddressType and
      udpEndpointRemoteAddressType are not legal.

      Reverted udpEndpointInstance to not-accessible, since
      udpEndpointProcess is now a mandatory to implement object (to
      align with the TCP-MIB).

      Added text to the udpEndpointInstance description to describe why
      it is needed.

      Added pseudo OBJECT clauses to the description of
      udpMIBCompliance2 for udpEndpointLocalAddressType and
      udpEndpointRemoteAddressType.

      Removed udpEndpointInstance from the udpEndpointGroup, since it is
      now not-accessible, and added udpEndpointProcess to the
      udpEndpointGroup, since it is now mandatory.  Removed the
      udpEndpointProcessGroup.

   Changes from draft-ietf-ipv6-rfc2013-update-00.txt

   24 October 2003

      Dropped udpEndpointInDatagrams, udpEndpointHCInDatagrams,
      udpEndpointOutDatagrams, udpEndpointHCOutDatagrams,
      udpEndpointInOctets, udpEndpointHCInOctets, udpEndpointOutOctets,
      udpEndpointHCOutOctets, and udpEndpointStartTime.

      Removed udpEndpointStatsGroup, udpEndpointHCDatagramStatsGroup and
      udpEndpointHCOctetStatsGroup.

      Changed udpEndpointInstance back to read-only, since there is no
      longer a mandatory non-auxiliary column in the udpEndpointTable.

      Removed Open Issues section.

      Moved Revision History section to beginning of document and
      removed its section number, to allow for easier removal at RFC



Fenner & Flick           Expires April 18, 2005                 [Page 4]

Internet-Draft                  UDP MIB                     October 2004


      publication.

      Updated to latest MIB boilerplate.

      Updated working group mailing list address.

      Removed SIZE constraints from udpEndpointLocalAddress and
      udpEndpointRemoteAddress, and updated the DESCRIPTION clause of
      udpEndpointEntry.

      Removed "Use of IP Addresses" section, since this information is
      already documented in the relevant MIB DESCRIPTIONs.

   Changes from draft-ietf-ipngwg-rfc2013-update-01.txt

   28 May 2002

      Removed udpConnectionTable.

      Renamed ListenerTable to EndpointTable, since with a remote
      address Listener is not quite correct.

      Use ''h consistently for 'any IP address', instead of sometimes
      ''h and sometimes all-zeroes of the right address family.

      Use "Datagram" instead of "Packet" to talk about UDP datagrams.

      Added mandatory udpEndpointStartTime, this also fixes the
      udpEndpointInstance needing to be read-only and mandatory.

      Make udpEndpointProcess mandatory on systems that have process
      IDs.

      Make a note of { udp 6 } in a comment for clarity on why it's
      skipped.

      Fleshed out section 3.

      Changed the deprecated udpLocalPort SYNTAX to Integer32.  Since it
      was already restricted to (0..65536) this is not a semantic
      change.

   Changes from draft-ietf-ipngwg-rfc2013-update-00.txt

   14 November 2001

      Added udpConnectionTable.




Fenner & Flick           Expires April 18, 2005                 [Page 5]

Internet-Draft                  UDP MIB                     October 2004


      Added udpListenerRemoteAddressType, to distinguish e.g.
      IPV6_V6ONLY.

      Added counters to udpListenerTable and udpConnectionTable.

   Changes from draft-ops-rfc2013-update-00.txt

   12 Jul 2001

      Turned into IPNG WG document

   Changes from first draft posted to v6mib mailing list:

   23 Feb 2001

      Made threshold for HC packet counters 1Mpps

      Added copyright statements and table of contents

   21 Feb 2001 -- Juergen's changes

      Renamed udpInetTable to udpListenerTable

      Updated Conformance info

   6 Feb 2001

      Removed v6-only objects.

      Removed remote and instance objects, turning the table back into a
      listener-only table.

      Renamed inetUdp* to udpInet*

      Added HC in and out datagram counters

      Added SIZE restriction to udpListenerLocalAddress.  (36 = 32-byte
      addresses plus 4-byte scope, but it's just a strawman)

      Used InetPortNumber TC from updated INET-ADDRESS-MIB

      Updated compliance statements.

      Added Keith to authors

      Added open issues section.





Fenner & Flick           Expires April 18, 2005                 [Page 6]

Internet-Draft                  UDP MIB                     October 2004


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

3.  Overview

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects used for implementations
   of the User Datagram Protocol (UDP), as defined in RFC 768 [RFC0768],
   in an IP version independent manner.

   The current UDP-MIB defined in this memo consists of one table and a
   group of scalars:

   o  The udp group of scalars reports parameters and statistics of a
      UDP protocol engine.  Two scalars udpHCInDatagrams and
      udpHCOutDatagrams have been added to this group since the
      publication of RFC 2013 [RFC2013] in order to provide
      high-capacity counters for fast networks.  Discontinuities in the
      values of the counters in this group are indicated by
      discontinuities in the value of the sysUpTime object, which is
      defined in RFC 3418 [RFC3418].

   o  The udpEndpointTable provides access to status information for all
      UDP endpoints handled by a UDP protocol engine.  The table
      provides for strictly listening endpoints, as with the historical
      udpTable, and also for "connected" UDP endpoints, which only
      accept packets from a given remote system.  It also reports
      identification of the operating system level processes which
      handle UDP connections.  Addresses and ports of UDP endpoints in
      this table are represented using the InetAddressType, InetAddress,
      and InetPortNumber textual conventions defined in RFC 3291bis
      [I-D.ietf-ops-rfc3291bis].






Fenner & Flick           Expires April 18, 2005                 [Page 7]

Internet-Draft                  UDP MIB                     October 2004


3.1  Relationship to Other MIBs

   This section discusses the relationship of this UDP-MIB module to
   other MIB modules.

3.1.1  Relationship to RFC1213-MIB

   UDP related MIB objects were originally defined as part of the
   RFC1213-MIB defined in RFC 1213 [RFC1213].  The UDP related objects
   of the RFC1213-MIB were later copied into a separate MIB module and
   published in RFC 2013 [RFC2013] in SMIv2 format.

   The previous versions of the UDP-MIB both defined the udpTable, which
   has been deprecated for basically two reasons:

   (1) The udpTable only supports IPv4.

       The current approach in the IETF is to write IP version neutral
       MIBs rather than having different definitions for various version
       of IP.  This reduces the amount of overhead when new objects are
       introduced since there is only one place to add them.  Hence, the
       approach taken in RFC 2454 [RFC2454] of having separate tables is
       not continued.

   (2) The udpTable does not permit describing "connected" UDP
       endpoints.

       It turns out that "connected" endpoints tend to have a different
       behaviour and management access pattern compared to listening
       endpoints.  Adding remote endpoint information to the
       udpEndpointTable thus allows for the addition of specific status
       and statistic objects for "connected" endpoints and connections.

3.1.2  Relationship to the IPV6-UDP-MIB

   The IPV6-UDP-MIB defined in RFC 2454 [RFC2454] has been moved to
   Historic since the approach of having separate IP version specific
   tables is not followed anymore.  Implementation of RFC 2454 is thus
   not suggested anymore.

   Note that since scoped addresses are now represented using the ipv4z
   and ipv6z address types, there is no longer a need to explicitly
   include the ifIndex in the index clause of the udpEndpointTable.
   This is a change from the use of ipv6UdpIfIndex in RFC 2454.

3.1.3  Relationship to HOST-RESOURCES-MIB and SYSAPPL-MIB

   The udpEndpointTable reports the identification of the operating



Fenner & Flick           Expires April 18, 2005                 [Page 8]

Internet-Draft                  UDP MIB                     October 2004


   system level process which handles a connection or a listening
   endpoint.  The value is reported as an Unsigned32 which is expected
   to be the same as the hrSWRunIndex of the HOST-RESOURCES-MIB
   [RFC2790] (if the value is smaller than 2147483647) or the
   sysApplElmtRunIndex of the SYSAPPL-MIB [RFC2287].  This allows
   managment applications to identify the UDP connections that belong to
   an operating system level process, which has proven to be valuable in
   operational environments.

4.  Definitions

   UDP-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64,
       Unsigned32, IpAddress, mib-2       FROM SNMPv2-SMI
       MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
       InetAddress, InetAddressType,
       InetPortNumber                     FROM INET-ADDRESS-MIB;


   udpMIB MODULE-IDENTITY
       LAST-UPDATED "200410180000Z"  -- October 18, 2004
       ORGANIZATION
              "IETF IPv6 Working Group
               http://www.ietf.org/html.charters/ipv6-charter.html"
       CONTACT-INFO
              "Bill Fenner (editor)

               AT&T Labs -- Research
               75 Willow Rd.
               Menlo Park, CA 94025

               Phone: +1 650 330-7893
               Email: <fenner@research.att.com>

               John Flick (editor)

               Hewlett-Packard Company
               8000 Foothills Blvd. M/S 5557
               Roseville, CA 95747

               Phone: +1 916 785 4018
               Email: <john.flick@hp.com>

               Send comments to <ipv6@ietf.org>"
       DESCRIPTION
              "The MIB module for managing UDP implementations.



Fenner & Flick           Expires April 18, 2005                 [Page 9]

Internet-Draft                  UDP MIB                     October 2004


               Copyright (C) The Internet Society (2004).  This
               version of this MIB module is part of RFC XXXX;
               see the RFC itself for full legal notices."
   -- RFC Ed.: Replace XXXX with actual RFC number & remove note
       REVISION      "200410180000Z"  -- October 18, 2004
       DESCRIPTION
              "IP version neutral revision, incorporating the
               following revisions:

               - Added udpHCInDatagrams and udpHCOutDatagrams in order
                 to provide high-capacity counters for fast networks.
               - Added text to the descriptions of all counter objects
                 to indicate how discontinuities are detected.
               - Deprecated the IPv4-specific udpTable and replaced it
                 with the version neutral udpEndpointTable.  This
                 table includes support for connected UDP endpoints
                 and support for identification of the operating
                 system process associated with a UDP endpoint.
               - Deprecated the udpGroup, and replaced it with object
                 groups representing the current set of objects.
               - Deprecated udpMIBCompliance, and replaced it with
                 udpMIBCompliance2, which includes the compliance
                 information for the new object groups.

               This version published as RFC XXXX."
   -- RFC Ed.: Replace XXXX with actual RFC number & remove note
       REVISION      "199411010000Z"    -- November 1, 1994
       DESCRIPTION
              "Initial SMIv2 version, published as RFC 2013."
       REVISION      "199103310000Z"    -- March 31, 1991
       DESCRIPTION
              "The initial revision of this MIB module was part of
               MIB-II, published as RFC 1213."
       ::= { mib-2 50 }

   -- the UDP group

   udp      OBJECT IDENTIFIER ::= { mib-2 7 }

   udpInDatagrams OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The total number of UDP datagrams delivered to UDP
               users.

               Discontinuities in the value of this counter can occur



Fenner & Flick           Expires April 18, 2005                [Page 10]

Internet-Draft                  UDP MIB                     October 2004


               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 1 }

   udpNoPorts OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The total number of received UDP datagrams for which
               there was no application at the destination port.

               Discontinuities in the value of this counter can occur
               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 2 }

   udpInErrors OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The number of received UDP datagrams that could not be
               delivered for reasons other than the lack of an
               application at the destination port.

               Discontinuities in the value of this counter can occur
               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 3 }

   udpOutDatagrams OBJECT-TYPE
       SYNTAX     Counter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The total number of UDP datagrams sent from this
               entity.

               Discontinuities in the value of this counter can occur
               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 4 }




Fenner & Flick           Expires April 18, 2005                [Page 11]

Internet-Draft                  UDP MIB                     October 2004


   udpHCInDatagrams OBJECT-TYPE
       SYNTAX     Counter64
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The total number of UDP datagrams delivered to UDP
               users, for devices which can receive more than 1
               million UDP datagrams per second.

               Discontinuities in the value of this counter can occur
               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 8 }

   udpHCOutDatagrams OBJECT-TYPE
       SYNTAX     Counter64
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The total number of UDP datagrams sent from this
               entity, for devices which can transmit more than 1
               million UDP datagrams per second.

               Discontinuities in the value of this counter can occur
               at re-initialization of the management system, and at
               other times as indicated by discontinuities in the
               value of sysUpTime."
       ::= { udp 9 }

   --
   -- { udp 6 } was defined as the ipv6UdpTable in RFC2454's
   -- IPV6-UDP-MIB.  This RFC obsoletes RFC 2454, so { udp 6 } is
   -- obsoleted.
   --

   -- The UDP "Endpoint" table.

   udpEndpointTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF UdpEndpointEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "A table containing information about this entity's UDP
               endpoints on which a local application is currently
               accepting or sending datagrams.

               The address type in this table represents the address



Fenner & Flick           Expires April 18, 2005                [Page 12]

Internet-Draft                  UDP MIB                     October 2004


               type used for the communication, irrespective of the
               higher-layer abstraction.  For example, an application
               using IPv6 'sockets' to communicate via IPv4 between
               ::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
               InetAddressType ipv4(1).

               Unlike the udpTable in RFC 2013, this table also allows
               the representation of an application which completely
               specifies both local and remote addresses and ports.  A
               listening application is represented in three possible
               ways:

               1) an application which is willing to accept both IPv4
                  and IPv6 datagrams is represented by a
                  udpEndpointLocalAddressType of unknown(0) and
                  udpEndpointLocalAddress of ''h (a zero-length
                  octet-string).

               2) an application which is willing to accept only IPv4
                  or only IPv6 datagrams is represented by a
                  udpEndpointLocalAddressType of the appropriate
                  address type, and udpEndpointLocalAddress of
                  '0.0.0.0' or '::' respectively.

               3) an application which is listening for datagrams only
                  for a specific IP address, but from any remote
                  system, is repesented by a
                  udpEndpointLocalAddressType of the appropriate
                  address type, udpEndpointLocalAddress specifying the
                  local address.

               In all cases where the remote is a wildcard, the
               udpEndpointRemoteAddressType is unknown(0), the
               udpEndpointRemoteAddress is ''h (a zero-length
               octet-string), and the udpEndpointRemotePort is 0.

               If the operating system is demultiplexing UDP packets
               by remote address and port, or if the application has
               'connected' the socket specifying a default remote
               address and port, the udpEndpointRemote* values should
               be used to reflect this."
       ::= { udp 7 }

   udpEndpointEntry OBJECT-TYPE
       SYNTAX     UdpEndpointEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION



Fenner & Flick           Expires April 18, 2005                [Page 13]

Internet-Draft                  UDP MIB                     October 2004


              "Information about a particular current UDP endpoint.

               Implementers need to be aware that if the total number
               of elements (octets or sub-identifiers) in
               udpEndpointLocalAddress and udpEndpointRemoteAddress
               exceeds 111 then OIDs of column instances in this table
               will have more than 128 sub-identifiers and cannot be
               accessed using SNMPv1, SNMPv2c, or SNMPv3."
       INDEX   { udpEndpointLocalAddressType,
                 udpEndpointLocalAddress,
                 udpEndpointLocalPort,
                 udpEndpointRemoteAddressType,
                 udpEndpointRemoteAddress,
                 udpEndpointRemotePort,
                 udpEndpointInstance }
       ::= { udpEndpointTable 1 }

   UdpEndpointEntry ::= SEQUENCE {
           udpEndpointLocalAddressType   InetAddressType,
           udpEndpointLocalAddress       InetAddress,
           udpEndpointLocalPort          InetPortNumber,
           udpEndpointRemoteAddressType  InetAddressType,
           udpEndpointRemoteAddress      InetAddress,
           udpEndpointRemotePort         InetPortNumber,
           udpEndpointInstance           Unsigned32,
           udpEndpointProcess            Unsigned32
       }

   udpEndpointLocalAddressType OBJECT-TYPE
       SYNTAX     InetAddressType
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The address type of udpEndpointLocalAddress.  Only
               IPv4, IPv4z, IPv6 and IPv6z addresses are expected, or
               unknown(0) if datagrams for all local IP addresses are
               accepted."
       ::= { udpEndpointEntry 1 }

   udpEndpointLocalAddress OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The local IP address for this UDP endpoint.

               The value of this object can be represented in three
               possible ways, depending on the characteristics of the



Fenner & Flick           Expires April 18, 2005                [Page 14]

Internet-Draft                  UDP MIB                     October 2004


               listening application:

               1. For an application that is willing to accept both
                  IPv4 and IPv6 datagrams, the value of this object
                  must be ''h (a zero-length octet-string), with
                  the value of the corresponding instance of the
                  udpEndpointLocalAddressType object being unknown(0).

               2. For an application which is willing to accept only
                  IPv4 or IPv6 datagrams, the value of this object
                  must be '0.0.0.0' or '::' respectively, while the
                  corresponding instatnce of the
                  udpEndpointLocalAddressType object represents the
                  appropriate address type.

               3. For an application which is listening for data
                  destined only to a specific IP address, the value
                  of this object is the specific IP address for which
                  this node is receiving packets, with the
                  corresponding instance of the
                  udpEndpointLocalAddressType object representing the
                  appropriate address type.

               As this object is used in the index for the
               udpEndpointTable, implementors of this table should be
               careful not to create entries that would result in OIDs
               with more than 128 subidentifiers; else the information
               cannot be accessed using SNMPv1, SNMPv2c or SNMPv3."
       ::= { udpEndpointEntry 2 }

   udpEndpointLocalPort OBJECT-TYPE
       SYNTAX     InetPortNumber
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The local port number for this UDP endpoint."
       ::= { udpEndpointEntry 3 }

   udpEndpointRemoteAddressType OBJECT-TYPE
       SYNTAX     InetAddressType
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The address type of udpEndpointRemoteAddress.  Only
               IPv4, IPv4z, IPv6 and IPv6z addresses are expected, or
               unknown(0) if datagrams for all remote IP addresses are
               accepted.  Also, note that some combinations of
               udpEndpointLocalAdressType and



Fenner & Flick           Expires April 18, 2005                [Page 15]

Internet-Draft                  UDP MIB                     October 2004


               udpEndpointRemoteAddressType are not supported.  In
               particular, if the value of this object is not
               unknown(0), it is expected to always refer to the
               same IP version as udpEndpointLocalAddressType."
       ::= { udpEndpointEntry 4 }

   udpEndpointRemoteAddress OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The remote IP address for this UDP endpoint.  If
               datagrams from any remote system are to be accepted,
               this value is ''h (a zero-length octet-string).
               Otherwise, it has the type described by
               udpEndpointRemoteAddressType, and is the address of the
               remote system from which datagrams are to be accepted
               (or to which all datagrams will be sent).

               As this object is used in the index for the
               udpEndpointTable, implementors of this table should be
               careful not to create entries that would result in OIDs
               with more than 128 subidentifiers; else the information
               cannot be accessed using SNMPv1, SNMPv2c or SNMPv3."
       ::= { udpEndpointEntry 5 }

   udpEndpointRemotePort OBJECT-TYPE
       SYNTAX     InetPortNumber
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The remote port number for this UDP endpoint.  If
               datagrams from any remote system are to be accepted,
               this value is zero."
       ::= { udpEndpointEntry 6 }

   udpEndpointInstance OBJECT-TYPE
       SYNTAX     Unsigned32 (1..'ffffffff'h)
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "The instance of this tuple.  This object is used to
               distinguish between multiple processes 'connected' to
               the same UDP endpoint.  For example, on a system
               implementing the BSD sockets interface, this would be
               used to support the SO_REUSEADDR and SO_REUSEPORT
               socket options."
       ::= { udpEndpointEntry 7 }



Fenner & Flick           Expires April 18, 2005                [Page 16]

Internet-Draft                  UDP MIB                     October 2004


   udpEndpointProcess OBJECT-TYPE
       SYNTAX     Unsigned32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The system's process ID for the process associated with
               this endpoint, or zero if there is no such process.
               This value is expected to be the same as
               HOST-RESOURCES-MIB::hrSWRunIndex or SYSAPPL-MIB::
               sysApplElmtRunIndex for some row in the appropriate
               tables."
       ::= { udpEndpointEntry 8 }

   -- The deprecated UDP Listener table

   -- The deprecated UDP listener table only contains information
   -- about this entity's IPv4 UDP end-points on which a local
   -- application is currently accepting datagrams.  It does not
   -- provide more detailed connection information, or information
   -- about IPv6 endpoints.

   udpTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF UdpEntry
       MAX-ACCESS not-accessible
       STATUS     deprecated
       DESCRIPTION
              "A table containing IPv4-specific UDP listener
               information.  It contains information about all local
               IPv4 UDP end-points on which an application is
               currently accepting datagrams.  This table has been
               deprecated in favor of the version neutral
               udpEndpointTable."
       ::= { udp 5 }

   udpEntry OBJECT-TYPE
       SYNTAX     UdpEntry
       MAX-ACCESS not-accessible
       STATUS     deprecated
       DESCRIPTION
              "Information about a particular current UDP listener."
       INDEX   { udpLocalAddress, udpLocalPort }
       ::= { udpTable 1 }

   UdpEntry ::= SEQUENCE {
       udpLocalAddress   IpAddress,
       udpLocalPort      Integer32
   }




Fenner & Flick           Expires April 18, 2005                [Page 17]

Internet-Draft                  UDP MIB                     October 2004


   udpLocalAddress OBJECT-TYPE
       SYNTAX     IpAddress
       MAX-ACCESS read-only
       STATUS     deprecated
       DESCRIPTION
              "The local IP address for this UDP listener.  In the
               case of a UDP listener which is willing to accept
               datagrams for any IP interface associated with the
               node, the value 0.0.0.0 is used."
       ::= { udpEntry 1 }

   udpLocalPort OBJECT-TYPE
       SYNTAX     Integer32 (0..65535)
       MAX-ACCESS read-only
       STATUS     deprecated
       DESCRIPTION
              "The local port number for this UDP listener."
       ::= { udpEntry 2 }

   -- conformance information

   udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 }

   udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 }
   udpMIBGroups      OBJECT IDENTIFIER ::= { udpMIBConformance 2 }

   -- compliance statements

   udpMIBCompliance2 MODULE-COMPLIANCE
       STATUS     current
       DESCRIPTION
              "The compliance statement for systems which implement
               UDP.

               There are a number of INDEX objects that cannot be
               represented in the form of OBJECT clauses in SMIv2, but
               for which we have the following compliance
               requirements, expressed in OBJECT clause form in this
               description clause:

               -- OBJECT      udpEndpointLocalAddressType
               -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
               --                               ipv6(2), ipv4z(3),
               --                               ipv6z(4) }
               -- DESCRIPTION
               --     Support for dns(5) is not required.
               -- OBJECT      udpEndpointLocalAddress
               -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))



Fenner & Flick           Expires April 18, 2005                [Page 18]

Internet-Draft                  UDP MIB                     October 2004


               -- DESCRIPTION
               --     Support is only required for zero-length
               --     octet-strings, and for scoped and unscoped
               --     IPv4 and IPv6 addresses.
               -- OBJECT      udpEndpointRemoteAddressType
               -- SYNTAX      InetAddressType { unknown(0), ipv4(1),
               --                               ipv6(2), ipv4z(3),
               --                               ipv6z(4) }
               -- DESCRIPTION
               --     Support for dns(5) is not required.
               -- OBJECT      udpEndpointRemoteAddress
               -- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
               -- DESCRIPTION
               --     Support is only required for zero-length
               --     octet-strings, and for scoped and unscoped
               --     IPv4 and IPv6 addresses.
              "
       MODULE  -- this module
            MANDATORY-GROUPS { udpBaseGroup, udpEndpointGroup }
            GROUP       udpHCGroup
            DESCRIPTION
                   "This group is mandatory for those systems which
                    are capable of receiving or transmitting more than
                    1 million UDP datagrams per second.  1 million
                    datagrams per second will cause a Counter32 to
                    wrap in just over an hour."
       ::= { udpMIBCompliances 2 }

   udpMIBCompliance MODULE-COMPLIANCE
       STATUS     deprecated
       DESCRIPTION
              "The compliance statement for IPv4-only systems which
               implement UDP.  For IP version independence, this
               compliance statement is deprecated in favor of
               udpMIBCompliance2.  However, agents are still
               encouraged to implement these objects in order to
               interoperate with the deployed base of managers."
       MODULE  -- this module
           MANDATORY-GROUPS { udpGroup }
       ::= { udpMIBCompliances 1 }

   -- units of conformance

   udpGroup OBJECT-GROUP
       OBJECTS   { udpInDatagrams, udpNoPorts,
                   udpInErrors, udpOutDatagrams,
                   udpLocalAddress, udpLocalPort }
       STATUS     deprecated



Fenner & Flick           Expires April 18, 2005                [Page 19]

Internet-Draft                  UDP MIB                     October 2004


       DESCRIPTION
              "The deprecated group of objects providing for
               management of UDP over IPv4."
       ::= { udpMIBGroups 1 }

   udpBaseGroup OBJECT-GROUP
       OBJECTS   { udpInDatagrams, udpNoPorts, udpInErrors,
                   udpOutDatagrams }
       STATUS     current
       DESCRIPTION
              "The group of objects providing for counters of UDP
               statistics."
       ::= { udpMIBGroups 2 }

   udpHCGroup OBJECT-GROUP
       OBJECTS   { udpHCInDatagrams, udpHCOutDatagrams }
       STATUS     current
       DESCRIPTION
              "The group of objects providing for counters of high
               speed UDP implementations."
       ::= { udpMIBGroups 3 }

   udpEndpointGroup OBJECT-GROUP
       OBJECTS    { udpEndpointProcess }
       STATUS     current
       DESCRIPTION
              "The group of objects providing for the IP version
               independent management of UDP 'endpoints'."
       ::= { udpMIBGroups 4 }

   END


5.  Acknowledgements

   This document contains a modified subset of RFC 1213 and updates RFC
   2013 and RFC 2454.  Acknowledments are therefore due to the authors
   and editors of these documents for their excellent work.

6.  Contributers

   This document is an output of the IPv6 MIB revision team, and
   contributors to earlier versions of this document include:

      Bill Fenner, AT&T Labs -- Research
      Email: fenner@research.at.com





Fenner & Flick           Expires April 18, 2005                [Page 20]

Internet-Draft                  UDP MIB                     October 2004


      Brian Haberman
      Email: brian@innovationslab.net


      Shawn A.  Routhier, Wind River
      Email: sar@epilogue.com


      Juergen Schoenwalder, TU Braunschweig
      Email: schoenw@ibr.cs.tu-bs.de


      Dave Thaler, Microsoft
      Email: dthaler@windows.microsoft.com

   Much of Keith McCloghrie's text from RFC1213/RFC2013 remains in this
   document, and the structure of the MIB is due to him.

   Mike Daniele wrote the original IPv6 UDP MIB in RFC2454.

   Juergen Schoenwalder provided much of the text for section 2.

7.  Security Considerations

   There are no management objects defined in this MIB that have a
   MAX-ACCESS clause of read-write and/or read-create.  So, if this MIB
   is implemented correctly, then there is no risk that an intruder can
   alter or create any management objects of this MIB module via direct
   SNMP SET operations.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   The indices of the udpEndpointTable and udpTable contain information
   on the listeners on an entity.  In particular, the
   udpEndpointLocalPort and udpLocalPort objects in the indices can be
   used to identify what ports are open on the machine and can thus what
   attacks are likely to succeed, without the attacker having to run a
   port scanner.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is



Fenner & Flick           Expires April 18, 2005                [Page 21]

Internet-Draft                  UDP MIB                     October 2004


   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is recommended that the implementors consider the security
   features as provided by the SNMPv3 framework (see [RFC3410], section
   8), including full support for the SNMPv3 cryptographic mechanisms
   (for authentication and privacy).

   Furthermore, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

8.  IANA Considerations

   The MIB module in this document uses the following IANA-assigned
   OBJECT IDENTIFIER values recorded in the SMI Numbers registry:

                +------------+-------------------------+
                | Descriptor | OBJECT IDENTIFIER value |
                +------------+-------------------------+
                | udp        | { mib-2 7}              |
                | udpMIB     | { mib-2 50 }            |
                +------------+-------------------------+

   Editor's Note (to be removed prior to publication): this draft makes
   no additional requests of the IANA.

9.  References

9.1  Normative References

   [I-D.ietf-ops-rfc3291bis]
              Daniele, M., "Textual Conventions for Internet Network
              Addresses", draft-ietf-ops-rfc3291bis-06 (work in
              progress), August 2004.

   [RFC0768]  Postel, J., "User Datagram Protocol", STD 6, RFC 768,
              August 1980.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              McCloghrie, K., Rose, M. and S. Waldbusser, "Structure of
              Management Information Version 2 (SMIv2)", STD 58, RFC
              2578, April 1999.




Fenner & Flick           Expires April 18, 2005                [Page 22]

Internet-Draft                  UDP MIB                     October 2004


   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              McCloghrie, K., Rose, M. and S. Waldbusser, "Textual
              Conventions for SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D. and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC3418]  Presuhn, R., "Management Information Base (MIB) for the
              Simple Network Management Protocol (SNMP)", STD 62, RFC
              3418, December 2002.

9.2  Informative References

   [RFC1213]  McCloghrie, K. and M. Rose, "Management Information Base
              for Network Management of TCP/IP-based internets:MIB-II",
              STD 17, RFC 1213, March 1991.

   [RFC2013]  McCloghrie, K., "SNMPv2 Management Information Base for
              the User Datagram Protocol using SMIv2", RFC 2013,
              November 1996.

   [RFC2287]  Krupczak, C. and J. Saperia, "Definitions of System-Level
              Managed Objects for Applications", RFC 2287, February
              1998.

   [RFC2454]  Daniele, M., "IP Version 6 Management Information Base for
              the User Datagram Protocol", RFC 2454, December 1998.

   [RFC2790]  Waldbusser, S. and P. Grillo, "Host Resources MIB", RFC
              2790, March 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D. and B. Stewart,
              "Introduction and Applicability Statements for
              Internet-Standard Management Framework", RFC 3410,
              December 2002.


Authors' Addresses

   Bill Fenner
   AT&T Labs -- Research
   75 Willow Rd
   Menlo Park, CA  94025
   USA

   EMail: fenner@research.att.com




Fenner & Flick           Expires April 18, 2005                [Page 23]

Internet-Draft                  UDP MIB                     October 2004


   John Flick
   Hewlett-Packard Company
   8000 Foothills Blvd. M/S 5557
   Roseville, CA  95747-5557
   USA

   EMail: john.flick@hp.com












































Fenner & Flick           Expires April 18, 2005                [Page 24]

Internet-Draft                  UDP MIB                     October 2004


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Fenner & Flick           Expires April 18, 2005                [Page 25]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/