[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RFC 4511

Internet-Draft                                  Editor:  J. Sermersheim
Intended Category: Standard Track                           Novell, Inc
Document: draft-ietf-ldapbis-protocol-32.txt                   Oct 2005
Obsoletes: RFCs 2251, 2830, 3771


                            LDAP: The Protocol


Status of this Memo

   By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she becomes aware will be disclosed, in accordance with
   Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that other
   groups may also distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress".

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire in February 2005.

   Technical discussion of this document will take place on the IETF
   LDAP Revision Working Group (LDAPbis) mailing list <ietf-
   ldapbis@openldap.org>. Please send editorial comments directly to the
   editor <jimse@novell.com>.


Abstract

   This document describes the protocol elements, along with their
   semantics and encodings, of the Lightweight Directory Access Protocol
   (LDAP). LDAP provides access to distributed directory services that
   act in accordance with X.500 data and service models. These protocol
   elements are based on those described in the X.500 Directory Access
   Protocol (DAP).


Table of Contents



Sermersheim      Internet-Draft - Expires April 2006              Page 1 
              Lightweight Directory Access Protocol Version 3

   1. Introduction....................................................3
   1.1. Relationship to Other LDAP Specifications.....................3
   2. Conventions.....................................................3
   3. Protocol Model..................................................4
   3.1 Operation and LDAP Message Layer Relationship..................5
   4. Elements of Protocol............................................5
   4.1. Common Elements...............................................5
   4.1.1. Message Envelope............................................5
   4.1.2. String Types................................................7
   4.1.3. Distinguished Name and Relative Distinguished Name..........7
   4.1.4. Attribute Descriptions......................................8
   4.1.5. Attribute Value.............................................8
   4.1.6. Attribute Value Assertion...................................8
   4.1.7. Attribute and PartialAttribute..............................9
   4.1.8. Matching Rule Identifier....................................9
   4.1.9. Result Message..............................................9
   4.1.10. Referral..................................................11
   4.1.11. Controls..................................................13
   4.2. Bind Operation...............................................14
   4.3. Unbind Operation.............................................17
   4.4. Unsolicited Notification.....................................17
   4.5. Search Operation.............................................18
   4.6. Modify Operation.............................................29
   4.7. Add Operation................................................31
   4.8. Delete Operation.............................................31
   4.9. Modify DN Operation..........................................32
   4.10. Compare Operation...........................................33
   4.11. Abandon Operation...........................................34
   4.12. Extended Operation..........................................35
   4.13. IntermediateResponse Message................................36
   4.14. StartTLS Operation..........................................37
   5. Protocol Encoding, Connection, and Transfer....................39
   5.1. Protocol Encoding............................................39
   5.2. Transmission Control Protocol (TCP)..........................40
   5.3. Termination of the LDAP session..............................40
   6. Security Considerations........................................40
   7. Acknowledgements...............................................42
   8. Normative References...........................................42
   9. Informative References.........................................44
   10. IANA Considerations...........................................44
   11. Editor's Address..............................................45
   Appendix A - LDAP Result Codes....................................46
   A.1 Non-Error Result Codes........................................46
   A.2 Result Codes..................................................46
   Appendix B - Complete ASN.1 Definition............................51
   Appendix C - Changes..............................................57
   C.1 Changes made to RFC 2251:.....................................57
   C.2 Changes made to RFC 2830:.....................................62
   C.3 Changes made to RFC 3771:.....................................63






Sermersheim      Internet-Draft - Expires April 2006              Page 2 
              Lightweight Directory Access Protocol Version 3

1. Introduction

   The Directory is "a collection of open systems cooperating to provide
   directory services" [X.500]. A directory user, which may be a human
   or other entity, accesses the Directory through a client (or
   Directory User Agent (DUA)). The client, on behalf of the directory
   user, interacts with one or more servers (or Directory System Agents
   (DSA)). Clients interact with servers using a directory access
   protocol.

   This document details the protocol elements of the Lightweight
   Directory Access Protocol (LDAP), along with their semantics.
   Following the description of protocol elements, it describes the way
   in which the protocol elements are encoded and transferred.


1.1. Relationship to Other LDAP Specifications

   This document is an integral part of the LDAP Technical Specification
   [Roadmap] which obsoletes the previously defined LDAP technical
   specification, RFC 3377, in its entirety.

   This document, together with [Roadmap], [AuthMeth], and [Models],
   obsoletes RFC 2251 in its entirety. Section 3.3 is obsoleted by
   [Roadmap]. Sections 4.2.1 (portions), and 4.2.2 are obsoleted by
   [AuthMeth].  Sections 3.2, 3.4, 4.1.3 (last paragraph), 4.1.4, 4.1.5,
   4.1.5.1, 4.1.9 (last paragraph), 5.1, 6.1, and 6.2 (last paragraph)
   are obsoleted by [Models].  The remainder of RFC 2251 is obsoleted by
   this document.  Appendix C.1 summarizes substantive changes in the
   remainder.

   This document obsoletes RFC 2830, Sections 2 and 4. The remainder of
   RFC 2830 is obsoleted by [AuthMeth]. Appendix C.2 summarizes
   substantive changes to the remaining sections.

   This document also obsoletes RFC 3771 in entirety.


2. Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", and "MAY" in this document are
   to be interpreted as described in [Keyword].

   Character names in this document use the notation for code points and
   names from the Unicode Standard [Unicode].  For example, the letter
   "a" may be represented as either <U+0061> or <LATIN SMALL LETTER A>.

   Note: a glossary of terms used in Unicode can be found in [Glossary].
   Information on the Unicode character encoding model can be found in
   [CharModel].




Sermersheim      Internet-Draft - Expires April 2006              Page 3 
              Lightweight Directory Access Protocol Version 3

   The term "transport connection" refers to the underlying transport
   services used to carry the protocol exchange, as well as associations
   established by these services.

   The term "TLS layer" refers to TLS services used in providing
   security services, as well as associations established by these
   services.

   The term "SASL layer" refers to SASL services used in providing
   security services, as well as associations established by these
   services.

   The term "LDAP message layer" refers to the LDAP Message Protocol
   Data Unit (PDU) services used in providing directory services, as
   well as associations established by these services.

   The term "LDAP session" refers to combined services (transport
   connection, TLS layer, SASL layer, LDAP message layer) and their
   associations.

   See the table in Section 5 for an illustration of these four terms.


3. Protocol Model

   The general model adopted by this protocol is one of clients
   performing protocol operations against servers. In this model, a
   client transmits a protocol request describing the operation to be
   performed to a server. The server is then responsible for performing
   the necessary operation(s) in the Directory. Upon completion of an
   operation, the server typically returns a response containing
   appropriate data to the requesting client.

   Protocol operations are generally independent of one another. Each
   operation is processed as an atomic action, leaving the directory in
   a consistent state.

   Although servers are required to return responses whenever such
   responses are defined in the protocol, there is no requirement for
   synchronous behavior on the part of either clients or servers.
   Requests and responses for multiple operations generally may be
   exchanged between a client and server in any order. If required,
   synchronous behavior may be controlled by client applications.

   The core protocol operations defined in this document can be mapped
   to a subset of the X.500 (1993) Directory Abstract Service [X.511].
   However there is not a one-to-one mapping between LDAP operations and
   X.500 Directory Access Protocol (DAP) operations. Server
   implementations acting as a gateway to X.500 directories may need to
   make multiple DAP requests to service a single LDAP request.





Sermersheim      Internet-Draft - Expires April 2006              Page 4 
              Lightweight Directory Access Protocol Version 3


3.1. Operation and LDAP Message Layer Relationship

   Protocol operations are exchanged at the LDAP message layer. When the
   transport connection is closed, any uncompleted operations at the
   LDAP message layer, when possible, are abandoned, and when not
   possible, are completed without transmission of the response. Also,
   when the transport connection is closed, the client MUST NOT assume
   that any uncompleted update operations have succeeded or failed.


4. Elements of Protocol

   The protocol is described using Abstract Syntax Notation One
   ([ASN.1]), and is transferred using a subset of ASN.1 Basic Encoding
   Rules ([BER]). Section 5 specifies how the protocol elements are
   encoded and transferred.

   In order to support future extensions to this protocol, extensibility
   is implied where it is allowed per ASN.1 (i.e. sequence, set, choice,
   and enumerated types are extensible). In addition, ellipses (...)
   have been supplied in ASN.1 types that are explicitly extensible as
   discussed in [LDAPIANA]. Because of the implied extensibility,
   clients and servers MUST (unless otherwise specified) ignore trailing
   SEQUENCE components whose tags they do not recognize.

   Changes to the protocol other than through the extension mechanisms
   described here require a different version number. A client indicates
   the version it is using as part of the BindRequest, described in
   Section 4.2. If a client has not sent a Bind, the server MUST assume
   the client is using version 3 or later.

   Clients may attempt to determine the protocol versions a server
   supports by reading the 'supportedLDAPVersion' attribute from the
   root DSE (DSA-Specific Entry) [Models].


4.1. Common Elements

   This section describes the LDAPMessage envelope Protocol Data Unit
   (PDU) format, as well as data type definitions, which are used in the
   protocol operations.


4.1.1. Message Envelope

   For the purposes of protocol exchanges, all protocol operations are
   encapsulated in a common envelope, the LDAPMessage, which is defined
   as follows:






Sermersheim      Internet-Draft - Expires April 2006              Page 5 
              Lightweight Directory Access Protocol Version 3

        LDAPMessage ::= SEQUENCE {
             messageID       MessageID,
             protocolOp      CHOICE {
                  bindRequest           BindRequest,
                  bindResponse          BindResponse,
                  unbindRequest         UnbindRequest,
                  searchRequest         SearchRequest,
                  searchResEntry        SearchResultEntry,
                  searchResDone         SearchResultDone,
                  searchResRef          SearchResultReference,
                  modifyRequest         ModifyRequest,
                  modifyResponse        ModifyResponse,
                  addRequest            AddRequest,
                  addResponse           AddResponse,
                  delRequest            DelRequest,
                  delResponse           DelResponse,
                  modDNRequest          ModifyDNRequest,
                  modDNResponse         ModifyDNResponse,
                  compareRequest        CompareRequest,
                  compareResponse       CompareResponse,
                  abandonRequest        AbandonRequest,
                  extendedReq           ExtendedRequest,
                  extendedResp          ExtendedResponse,
                  ...,
                  intermediateResponse  IntermediateResponse },
             controls       [0] Controls OPTIONAL }

        MessageID ::= INTEGER (0 .. maxInt)

        maxInt INTEGER ::= 2147483647 -- (2^^31 - 1) --

   The ASN.1 type Controls is defined in Section 4.1.11.

   The function of the LDAPMessage is to provide an envelope containing
   common fields required in all protocol exchanges. At this time the
   only common fields are the messageID and the controls.

   If the server receives an LDAPMessage from the client in which the
   LDAPMessage SEQUENCE tag cannot be recognized, the messageID cannot
   be parsed, the tag of the protocolOp is not recognized as a request,
   or the encoding structures or lengths of data fields are found to be
   incorrect, then the server SHOULD return the Notice of Disconnection
   described in Section 4.4.1, with the resultCode set to protocolError,
   and MUST immediately terminate the LDAP session as described in
   Section 5.3.

   In other cases where the client or server cannot parse an LDAP PDU,
   it SHOULD abruptly terminate the LDAP session (Section 5.3) where
   further communication (including providing notice) would be
   pernicious. Otherwise, server implementations MUST return an
   appropriate response to the request, with the resultCode set to
   protocolError.



Sermersheim      Internet-Draft - Expires April 2006              Page 6 
              Lightweight Directory Access Protocol Version 3

4.1.1.1. Message ID

   All LDAPMessage envelopes encapsulating responses contain the
   messageID value of the corresponding request LDAPMessage.

   The message ID of a request MUST have a non-zero value different from
   the messageID of any other request in progress in the same LDAP
   session. The zero value is reserved for the unsolicited notification
   message.

   Typical clients increment a counter for each request.

   A client MUST NOT send a request with the same message ID as an
   earlier request in the same LDAP session unless it can be determined
   that the server is no longer servicing the earlier request (e.g.
   after the final response is received, or a subsequent Bind
   completes). Otherwise the behavior is undefined. For this purpose,
   note that Abandon and successfully abandoned operations do not send
   responses.


4.1.2. String Types

   The LDAPString is a notational convenience to indicate that, although
   strings of LDAPString type encode as ASN.1 OCTET STRING types, the
   [ISO10646] character set (a superset of [Unicode]) is used, encoded
   following the [UTF-8] algorithm. Note that Unicode characters U+0000
   through U+007F are the same as ASCII 0 through 127, respectively, and
   have the same single octet UTF-8 encoding.  Other Unicode characters
   have a multiple octet UTF-8 encoding.

        LDAPString ::= OCTET STRING -- UTF-8 encoded,
                                    -- [ISO10646] characters

   The LDAPOID is a notational convenience to indicate that the
   permitted value of this string is a (UTF-8 encoded) dotted-decimal
   representation of an OBJECT IDENTIFIER. Although an LDAPOID is
   encoded as an OCTET STRING, values are limited to the definition of
   <numericoid> given in Section 1.4 of [Models].

        LDAPOID ::= OCTET STRING -- Constrained to <numericoid> [Models]

   For example,

        1.3.6.1.4.1.1466.1.2.3


4.1.3. Distinguished Name and Relative Distinguished Name

   An LDAPDN is defined to be the representation of a Distinguished Name
   (DN) after encoding according to the specification in [LDAPDN].

        LDAPDN ::= LDAPString
                   -- Constrained to <distinguishedName> [LDAPDN]

Sermersheim      Internet-Draft - Expires April 2006              Page 7 
              Lightweight Directory Access Protocol Version 3


   A RelativeLDAPDN is defined to be the representation of a Relative
   Distinguished Name (RDN) after encoding according to the
   specification in [LDAPDN].

        RelativeLDAPDN ::= LDAPString
                           -- Constrained to <name-component> [LDAPDN]


4.1.4. Attribute Descriptions

   The definition and encoding rules for attribute descriptions are
   defined in Section 2.5 of [Models]. Briefly, an attribute description
   is an attribute type and zero or more options.

        AttributeDescription ::= LDAPString
                                -- Constrained to <attributedescription>
                                -- [Models]


4.1.5. Attribute Value

   A field of type AttributeValue is an OCTET STRING containing an
   encoded attribute value. The attribute value is encoded according to
   the LDAP-specific encoding definition of its corresponding syntax.
   The LDAP-specific encoding definitions for different syntaxes and
   attribute types may be found in other documents and in particular
   [Syntaxes].

        AttributeValue ::= OCTET STRING

   Note that there is no defined limit on the size of this encoding;
   thus protocol values may include multi-megabyte attribute values
   (e.g. photographs).

   Attribute values may be defined which have arbitrary and non-
   printable syntax. Implementations MUST NOT display nor attempt to
   decode an attribute value if its syntax is not known. The
   implementation may attempt to discover the subschema of the source
   entry, and retrieve the descriptions of 'attributeTypes' from it
   [Models].

   Clients MUST only send attribute values in a request that are valid
   according to the syntax defined for the attributes.


4.1.6. Attribute Value Assertion

   The AttributeValueAssertion (AVA) type definition is similar to the
   one in the X.500 Directory standards. It contains an attribute
   description and a matching rule ([Models] Section 4.1.3) assertion
   value suitable for that type. Elements of this type are typically
   used to assert that the value in assertionValue matches a value of an
   attribute.

Sermersheim      Internet-Draft - Expires April 2006              Page 8 
              Lightweight Directory Access Protocol Version 3


        AttributeValueAssertion ::= SEQUENCE {
             attributeDesc   AttributeDescription,
             assertionValue  AssertionValue }

        AssertionValue ::= OCTET STRING

   The syntax of the AssertionValue depends on the context of the LDAP
   operation being performed. For example, the syntax of the EQUALITY
   matching rule for an attribute is used when performing a Compare
   operation. Often this is the same syntax used for values of the
   attribute type, but in some cases the assertion syntax differs from
   the value syntax. See objectIdentiferFirstComponentMatch in
   [Syntaxes] for an example.


4.1.7. Attribute and PartialAttribute

   Attributes and partial attributes consist of an attribute description
   and attribute values. A PartialAttribute allows zero values, while
   Attribute requires at least one value.

        PartialAttribute ::= SEQUENCE {
             type       AttributeDescription,
             vals       SET OF value AttributeValue }

        Attribute ::= PartialAttribute(WITH COMPONENTS {
             ...,
             vals (SIZE(1..MAX))})

   No two of the attribute values may be equivalent as described by
   Section 2.3 of [Models]. The set of attribute values is unordered.
   Implementations MUST NOT rely upon the ordering being repeatable.


4.1.8. Matching Rule Identifier

   Matching rules are defined in Section 4.1.3 of [Models]. A matching
   rule is identified in the protocol by the printable representation of
   either its <numericoid>, or one of its short name descriptors
   [Models], e.g. 'caseIgnoreMatch' or '2.5.13.2'.

        MatchingRuleId ::= LDAPString


4.1.9. Result Message

   The LDAPResult is the construct used in this protocol to return
   success or failure indications from servers to clients. To various
   requests, servers will return responses containing the elements found
   in LDAPResult to indicate the final status of the protocol operation
   request.



Sermersheim      Internet-Draft - Expires April 2006              Page 9 
              Lightweight Directory Access Protocol Version 3

        LDAPResult ::= SEQUENCE {
             resultCode         ENUMERATED {
                  success                      (0),
                  operationsError              (1),
                  protocolError                (2),
                  timeLimitExceeded            (3),
                  sizeLimitExceeded            (4),
                  compareFalse                 (5),
                  compareTrue                  (6),
                  authMethodNotSupported       (7),
                  strongerAuthRequired         (8),
                       -- 9 reserved --
                  referral                     (10),
                  adminLimitExceeded           (11),
                  unavailableCriticalExtension (12),
                  confidentialityRequired      (13),
                  saslBindInProgress           (14),
                  noSuchAttribute              (16),
                  undefinedAttributeType       (17),
                  inappropriateMatching        (18),
                  constraintViolation          (19),
                  attributeOrValueExists       (20),
                  invalidAttributeSyntax       (21),
                       -- 22-31 unused --
                  noSuchObject                 (32),
                  aliasProblem                 (33),
                  invalidDNSyntax              (34),
                       -- 35 reserved for undefined isLeaf --
                  aliasDereferencingProblem    (36),
                       -- 37-47 unused --
                  inappropriateAuthentication  (48),
                  invalidCredentials           (49),
                  insufficientAccessRights     (50),
                  busy                         (51),
                  unavailable                  (52),
                  unwillingToPerform           (53),
                  loopDetect                   (54),
                       -- 55-63 unused --
                  namingViolation              (64),
                  objectClassViolation         (65),
                  notAllowedOnNonLeaf          (66),
                  notAllowedOnRDN              (67),
                  entryAlreadyExists           (68),
                  objectClassModsProhibited    (69),
                       -- 70 reserved for CLDAP --
                  affectsMultipleDSAs          (71),
                       -- 72-79 unused --
                  other                        (80),
                  ... },
             matchedDN          LDAPDN,
             diagnosticMessage  LDAPString,
             referral           [3] Referral OPTIONAL }



Sermersheim      Internet-Draft - Expires April 2006             Page 10 
              Lightweight Directory Access Protocol Version 3

   The resultCode enumeration is extensible as defined in Section 3.6 of
   [LDAPIANA]. The meanings of the listed result codes are given in
   Appendix A. If a server detects multiple errors for an operation,
   only one result code is returned. The server should return the result
   code that best indicates the nature of the error encountered. Servers
   may return substituted result codes to prevent unauthorized
   disclosures.

   The diagnosticMessage field of this construct may, at the server's
   option, be used to return a string containing a textual, human-
   readable (terminal control and page formatting characters should be
   avoided) diagnostic message. As this diagnostic message is not
   standardized, implementations MUST NOT rely on the values returned.
   Diagnostic messages typically supplement the resultCode with
   additional information. If the server chooses not to return a textual
   diagnostic, the diagnosticMessage field MUST be empty.

   For certain result codes (typically, but not restricted to
   noSuchObject, aliasProblem, invalidDNSyntax and
   aliasDereferencingProblem), the matchedDN field is set (subject to
   access controls) to the name of the last entry (object or alias) used
   in finding the target (or base) object. This will be a truncated form
   of the provided name or, if an alias was dereferenced while
   attempting to locate the entry, of the resulting name. Otherwise the
   matchedDN field is empty.


4.1.10. Referral

   The referral result code indicates that the contacted server cannot
   or will not perform the operation and that one or more other servers
   may be able to. Reasons for this include:

   - The target entry of the request is not held locally, but the
     server has knowledge of its possible existence elsewhere.

   - The operation is restricted on this server -- perhaps due to a
     read-only copy of an entry to be modified.

   The referral field is present in an LDAPResult if the resultCode is
   set to referral, and absent with all other result codes. It contains
   one or more references to one or more servers or services that may be
   accessed via LDAP or other protocols. Referrals can be returned in
   response to any operation request (except Unbind and Abandon which do
   not have responses). At least one URI MUST be present in the
   Referral.

   During a Search operation, after the baseObject is located, and
   entries are being evaluated, the referral is not returned. Instead,
   continuation references, described in Section 4.5.3, are returned
   when other servers would need to be contacted to complete the
   operation.

        Referral ::= SEQUENCE SIZE (1..MAX) OF uri URI

Sermersheim      Internet-Draft - Expires April 2006             Page 11 
              Lightweight Directory Access Protocol Version 3


        URI ::= LDAPString     -- limited to characters permitted in
                               -- URIs

   If the client wishes to progress the operation, it contacts one of
   the supported services found in the referral. If multiple URIs are
   present, the client assumes that any supported URI may be used to
   progress the operation.

   Clients that follow referrals MUST ensure that they do not loop
   between servers. They MUST NOT repeatedly contact the same server for
   the same request with the same parameters. Some clients use a counter
   that is incremented each time referral handling occurs for an
   operation, and these kinds of clients MUST be able to handle at least
   ten nested referrals while progressing the operation.

   A URI for a server implementing LDAP and accessible via [TCP]/[IP]
   (v4 or v6) is written as an LDAP URL according to [LDAPURL].

   Referral values which are LDAP URLs follow these rules:

   - If an alias was dereferenced, the <dn> part of the LDAP URL MUST
     be present, with the new target object name.

   - It is RECOMMENDED that the <dn> part be present to avoid
     ambiguity.

   - If the <dn> part is present, the client uses this name in its next
     request to progress the operation, and if it is not present the
     client uses the same name as in the original request.

   - Some servers (e.g. participating in distributed indexing) may
     provide a different filter in a URL of a referral for a Search
     operation.

   - If the <filter> part of the LDAP URL is present, the client uses
     this filter in its next request to progress this Search, and if it
     is not present the client uses the same filter as it used for that
     Search.

   - For Search, it is RECOMMENDED that the <scope> part be present to
     avoid ambiguity.

   - If the <scope> part is missing, the scope of the original Search
     is used by the client to progress the operation.

   - Other aspects of the new request may be the same as or different
     from the request which generated the referral.

   Other kinds of URIs may be returned. The syntax and semantics of such
   URIs is left to future specifications. Clients may ignore URIs that
   they do not support.



Sermersheim      Internet-Draft - Expires April 2006             Page 12 
              Lightweight Directory Access Protocol Version 3

   UTF-8 encoded characters appearing in the string representation of a
   DN, search filter, or other fields of the referral value may not be
   legal for URIs (e.g. spaces) and MUST be escaped using the % method
   in [URI].


4.1.11. Controls

   Controls provide a mechanism whereby the semantics and arguments of
   existing LDAP operations may be extended. One or more controls may be
   attached to a single LDAP message. A control only affects the
   semantics of the message it is attached to.

   Controls sent by clients are termed 'request controls' and those sent
   by servers are termed 'response controls'.

        Controls ::= SEQUENCE OF control Control

        Control ::= SEQUENCE {
             controlType             LDAPOID,
             criticality             BOOLEAN DEFAULT FALSE,
             controlValue            OCTET STRING OPTIONAL }

   The controlType field is the dotted-decimal representation of an
   OBJECT IDENTIFIER which uniquely identifies the control. This
   provides unambiguous naming of controls. Often, response control(s)
   solicited by a request control share controlType values with the
   request control.

   The criticality field only has meaning in controls attached to
   request messages (except UnbindRequest). For controls attached to
   response messages and the UnbindRequest, the criticality field SHOULD
   be FALSE, and MUST be ignored by the receiving protocol peer. A value
   of TRUE indicates that it is unacceptable to perform the operation
   without applying the semantics of the control. Specifically, the
   criticality field is applied as follows:

   - If the server does not recognize the control type, determines that
     it is not appropriate for the operation, or is otherwise unwilling
     to perform the operation with the control, and the criticality
     field is TRUE, the server MUST NOT perform the operation, and for
     operations that have a response message, MUST return with the
     resultCode set to unavailableCriticalExtension.

   - If the server does not recognize the control type, determines that
     it is not appropriate for the operation, or is otherwise unwilling
     to perform the operation with the control, and the criticality
     field is FALSE, the server MUST ignore the control.

   - Regardless of criticality, if a control is applied to an
     operation, it is applied consistently and impartially to the
     entire operation.



Sermersheim      Internet-Draft - Expires April 2006             Page 13 
              Lightweight Directory Access Protocol Version 3

   The controlValue may contain information associated with the
   controlType. Its format is defined by the specification of the
   control. Implementations MUST be prepared to handle arbitrary
   contents of the controlValue octet string, including zero bytes. It
   is absent only if there is no value information which is associated
   with a control of its type. When a controlValue is defined in terms
   of ASN.1, and BER encoded according to Section 5.1, it also follows
   the extensibility rules in Section 4.

   Servers list the controlType of request controls they recognize in
   the 'supportedControl' attribute in the root DSE (Section 5.1 of
   [Models]).

   Controls SHOULD NOT be combined unless the semantics of the
   combination has been specified. The semantics of control
   combinations, if specified, are generally found in the control
   specification most recently published. When a combination of controls
   is encountered whose semantics are invalid, not specified (or not
   known), the message is considered to be not well-formed, thus the
   operation fails with protocolError. Controls with a criticality of
   FALSE may be ignored in order to arrive at a valid combination.
   Additionally, unless order-dependent semantics are given in a
   specification, the order of a combination of controls in the SEQUENCE
   is ignored. Where the order is to be ignored but cannot be ignored by
   the server, the message is considered not well-formed and the
   operation fails with protocolError. Again, controls with a
   criticality of FALSE may be ignored in order to arrive at a valid
   combination.

   This document does not specify any controls. Controls may be
   specified in other documents. Documents detailing control extensions
   are to provide for each control:

   - the OBJECT IDENTIFIER assigned to the control,

   - direction as to what value the sender should provide for the
     criticality field (note: the semantics of the criticality field
     are defined above should not be altered by the control's
     specification),

   - whether the controlValue field is present, and if so, the format
     of its contents,

   - the semantics of the control, and

   - optionally, semantics regarding the combination of the control
     with other controls.


4.2. Bind Operation





Sermersheim      Internet-Draft - Expires April 2006             Page 14 
              Lightweight Directory Access Protocol Version 3

   The function of the Bind operation is to allow authentication
   information to be exchanged between the client and server. The Bind
   operation should be thought of as the "authenticate" operation.
   Operational, authentication, and security-related semantics of this
   operation are given in [AuthMeth].

   The Bind request is defined as follows:

        BindRequest ::= [APPLICATION 0] SEQUENCE {
             version                 INTEGER (1 .. 127),
             name                    LDAPDN,
             authentication          AuthenticationChoice }

        AuthenticationChoice ::= CHOICE {
             simple                  [0] OCTET STRING,
                                     -- 1 and 2 reserved
             sasl                    [3] SaslCredentials,
             ... }

        SaslCredentials ::= SEQUENCE {
             mechanism               LDAPString,
             credentials             OCTET STRING OPTIONAL }

   Fields of the BindRequest are:

   - version: A version number indicating the version of the protocol
     to be used at the LDAP message layer. This document describes
     version 3 of the protocol. There is no version negotiation. The
     client sets this field to the version it desires. If the server
     does not support the specified version, it MUST respond with a
     BindResponse where the resultCode is set to protocolError.

   - name: If not empty, the name of the Directory object that the
     client wishes to bind as. This field may take on a null value (a
     zero length string) for the purposes of anonymous binds
     ([AuthMeth] Section 5.1) or when using Simple Authentication and
     Security Layer [SASL] authentication ([AuthMeth] Section 5.2).
     Where the server attempts to locate the named object, it SHALL NOT
     perform alias dereferencing.

   - authentication: information used in authentication. This type is
     extensible as defined in Section 3.7 of [LDAPIANA]. Servers that
     do not support a choice supplied by a client return a BindResponse
     with the resultCode set to authMethodNotSupported.

     Textual passwords (consisting of a character sequence with a known
     character set and encoding) transferred to the server using the
     simple AuthenticationChoice SHALL be transferred as [UTF-8]
     encoded [Unicode]. Prior to transfer, clients SHOULD prepare text
     passwords as "query" strings by applying the [SASLprep] profile of
     the [Stringprep] algorithm. Passwords consisting of other data
     (such as random octets) MUST NOT be altered. The determination of
     whether a password is textual is a local client matter.


Sermersheim      Internet-Draft - Expires April 2006             Page 15 
              Lightweight Directory Access Protocol Version 3


4.2.1. Processing of the Bind Request

   Before processing a BindRequest, all uncompleted operations MUST
   either complete or be abandoned. The server may either wait for the
   uncompleted operations to complete, or abandon them. The server then
   proceeds to authenticate the client in either a single-step, or
   multi-step Bind process. Each step requires the server to return a
   BindResponse to indicate the status of authentication.

   After sending a BindRequest, clients MUST NOT send further LDAP PDUs
   until receiving the BindResponse. Similarly, servers SHOULD NOT
   process or respond to requests received while processing a
   BindRequest.

   If the client did not bind before sending a request and receives an
   operationsError to that request, it may then send a BindRequest. If
   this also fails or the client chooses not to bind on the existing
   LDAP session, it may terminate the LDAP session, re-establish it and
   begin again by first sending a BindRequest. This will aid in
   interoperating with servers implementing other versions of LDAP.

   Clients may send multiple Bind requests to change the authentication
   and/or security associations or to complete a multi-stage Bind
   process. Authentication from earlier binds is subsequently ignored.

   For some SASL authentication mechanisms, it may be necessary for the
   client to invoke the BindRequest multiple times ([AuthMeth] Section
   5.2). Clients MUST NOT invoke operations between two Bind requests
   made as part of a multi-stage Bind.

   A client may abort a SASL bind negotiation by sending a BindRequest
   with a different value in the mechanism field of SaslCredentials, or
   an AuthenticationChoice other than sasl.

   If the client sends a BindRequest with the sasl mechanism field as an
   empty string, the server MUST return a BindResponse with the
   resultCode set to authMethodNotSupported. This will allow clients to
   abort a negotiation if it wishes to try again with the same SASL
   mechanism.


4.2.2. Bind Response

   The Bind response is defined as follows.

        BindResponse ::= [APPLICATION 1] SEQUENCE {
             COMPONENTS OF LDAPResult,
             serverSaslCreds    [7] OCTET STRING OPTIONAL }

   BindResponse consists simply of an indication from the server of the
   status of the client's request for authentication.



Sermersheim      Internet-Draft - Expires April 2006             Page 16 
              Lightweight Directory Access Protocol Version 3

   A successful Bind operation is indicated by a BindResponse with a
   resultCode set to success. Otherwise, an appropriate result code is
   set in the BindResponse. For BindResponse, the protocolError result
   code may be used to indicate that the version number supplied by the
   client is unsupported.

   If the client receives a BindResponse where the resultCode is set to
   protocolError, it is to assume that the server does not support this
   version of LDAP. While the client may be able proceed with another
   version of this protocol (this may or may not require closing and re-
   establishing the transport connection), how to proceed with another
   version of this protocol is beyond the scope of this document.
   Clients which are unable or unwilling to proceed SHOULD terminate the
   LDAP session.

   The serverSaslCreds field is used as part of a SASL-defined bind
   mechanism to allow the client to authenticate the server to which it
   is communicating, or to perform "challenge-response" authentication.
   If the client bound with the simple choice, or the SASL mechanism
   does not require the server to return information to the client, then
   this field SHALL NOT be included in the BindResponse.


4.3. Unbind Operation

   The function of the Unbind operation is to terminate an LDAP session.
   The Unbind operation is not the antithesis of the Bind operation as
   the name implies. The naming of these operations are historical. The
   Unbind operation should be thought of as the "quit" operation.

   The Unbind operation is defined as follows:

        UnbindRequest ::= [APPLICATION 2] NULL

   The client, upon transmission of the UnbindRequest, and the server,
   upon receipt of the UnbindRequest are to gracefully terminate the
   LDAP session as described in Section 5.3.

   Uncompleted operations are handled as specified in Section 3.1.


4.4. Unsolicited Notification

   An unsolicited notification is an LDAPMessage sent from the server to
   the client which is not in response to any LDAPMessage received by
   the server. It is used to signal an extraordinary condition in the
   server or in the LDAP session between the client and the server. The
   notification is of an advisory nature, and the server will not expect
   any response to be returned from the client.






Sermersheim      Internet-Draft - Expires April 2006             Page 17 
              Lightweight Directory Access Protocol Version 3

   The unsolicited notification is structured as an LDAPMessage in which
   the messageID is zero and protocolOp is set to the extendedResp
   choice using the ExtendedResponse type (See Section 4.12). The
   responseName field of the ExtendedResponse always contains an LDAPOID
   which is unique for this notification.

   One unsolicited notification (Notice of Disconnection) is defined in
   this document. The specification of an unsolicited notification
   consists of:

   - the OBJECT IDENTIFIER assigned to the notification (to be
     specified in the responseName,

   - the format of the contents of the responseValue (if any),

   - the circumstances which will cause the notification to be sent,
     and

   - the semantics of the message.


4.4.1. Notice of Disconnection

   This notification may be used by the server to advise the client that
   the server is about to terminate the LDAP session on its own
   initiative. This notification is intended to assist clients in
   distinguishing between an exceptional server condition and a
   transient network failure. Note that this notification is not a
   response to an Unbind requested by the client. Uncompleted operations
   are handled as specified in Section 3.1.

   The responseName is 1.3.6.1.4.1.1466.20036, the responseValue field
   is absent, and the resultCode is used to indicate the reason for the
   disconnection. When the strongerAuthRequired resultCode is returned
   with this message, it indicates that the server has detected that an
   established security association between the client and server has
   unexpectedly failed or been compromised.

   Upon transmission of the Notice of Disconnection, the server
   gracefully terminates the LDAP session as described in Section 5.3.


4.5. Search Operation

   The Search operation is used to request a server to return, subject
   to access controls and other restrictions, a set of entries matching
   a complex search criterion. This can be used to read attributes from
   a single entry, from entries immediately subordinate to a particular
   entry, or a whole subtree of entries.


4.5.1. Search Request

   The Search request is defined as follows:

Sermersheim      Internet-Draft - Expires April 2006             Page 18 
              Lightweight Directory Access Protocol Version 3


        SearchRequest ::= [APPLICATION 3] SEQUENCE {
             baseObject      LDAPDN,
             scope           ENUMERATED {
                  baseObject              (0),
                  singleLevel             (1),
                  wholeSubtree            (2),
                  ... },
             derefAliases    ENUMERATED {
                  neverDerefAliases       (0),
                  derefInSearching        (1),
                  derefFindingBaseObj     (2),
                  derefAlways             (3) },
             sizeLimit       INTEGER (0 .. maxInt),
             timeLimit       INTEGER (0 .. maxInt),
             typesOnly       BOOLEAN,
             filter          Filter,
             attributes      AttributeSelection }

        AttributeSelection ::= SEQUENCE OF selector LDAPString
                        -- The LDAPString is constrained to
                        -- <attributeSelector> in Section 4.5.1.7

        Filter ::= CHOICE {
             and             [0] SET SIZE (1..MAX) OF filter Filter,
             or              [1] SET SIZE (1..MAX) OF filter Filter,
             not             [2] Filter,
             equalityMatch   [3] AttributeValueAssertion,
             substrings      [4] SubstringFilter,
             greaterOrEqual  [5] AttributeValueAssertion,
             lessOrEqual     [6] AttributeValueAssertion,
             present         [7] AttributeDescription,
             approxMatch     [8] AttributeValueAssertion,
             extensibleMatch [9] MatchingRuleAssertion,
             ... }

        SubstringFilter ::= SEQUENCE {
             type           AttributeDescription,
             substrings     SEQUENCE SIZE (1..MAX) OF substring CHOICE {
                  initial [0] AssertionValue,  -- can occur at most once
                  any     [1] AssertionValue,
                  final   [2] AssertionValue } -- can occur at most once
             }

        MatchingRuleAssertion ::= SEQUENCE {
             matchingRule    [1] MatchingRuleId OPTIONAL,
             type            [2] AttributeDescription OPTIONAL,
             matchValue      [3] AssertionValue,
             dnAttributes    [4] BOOLEAN DEFAULT FALSE }






Sermersheim      Internet-Draft - Expires April 2006             Page 19 
              Lightweight Directory Access Protocol Version 3

   Note that an X.500 "list"-like operation can be emulated by the
   client requesting a singleLevel Search operation with a filter
   checking for the presence of the 'objectClass' attribute, and that an
   X.500 "read"-like operation can be emulated by a baseObject Search
   operation with the same filter.  A server which provides a gateway to
   X.500 is not required to use the Read or List operations, although it
   may choose to do so, and if it does, it must provide the same
   semantics as the X.500 Search operation.


4.5.1.1. SearchRequest.baseObject

   The name of the base object entry (or possibly the root) relative to
   which the Search is to be performed.


4.5.1.2. SearchRequest.scope

   Specifies the scope of the Search to be performed. The semantics (as
   described in [X.511]) of the defined values of this field are:

     baseObject:  The scope is constrained to the entry named by
     baseObject.

     singleLevel: The scope is constrained to the immediate
     subordinates of the entry named by baseObject.

     wholeSubtree: the scope is constrained to the entry named by the
     baseObject, and all its subordinates.


4.5.1.3. SearchRequest.derefAliases

   An indicator as to whether or not alias entries (as defined in
   [Models]) are to be dereferenced during stages of the Search
   operation.

   The act of dereferencing an alias includes recursively dereferencing
   aliases which refer to aliases.

   Servers MUST detect looping while dereferencing aliases in order to
   prevent denial of service attacks of this nature.

   The semantics of the defined values of this field are:

     neverDerefAliases: Do not dereference aliases in searching or in
     locating the base object of the Search.








Sermersheim      Internet-Draft - Expires April 2006             Page 20 
              Lightweight Directory Access Protocol Version 3

     derefInSearching: While searching subordinates of the base object,
     dereference any alias within the search scope. Dereferenced
     objects become the vertices of further search scopes where the
     Search operation is also applied. If the search scope is
     wholeSubtree, the Search continues in the subtree(s) of any
     dereferenced object. If the search scope is singleLevel, the
     search is applied to any dereferenced objects, and is not applied
     to their subordinates. Servers SHOULD eliminate duplicate entries
     that arise due to alias dereferencing while searching.

     derefFindingBaseObj: Dereference aliases in locating the base
     object of the Search, but not when searching subordinates of the
     base object.

     derefAlways: Dereference aliases both in searching and in locating
     the base object of the Search.


4.5.1.4. SearchRequest.sizeLimit

   A size limit that restricts the maximum number of entries to be
   returned as a result of the Search. A value of zero in this field
   indicates that no client-requested size limit restrictions are in
   effect for the Search. Servers may also enforce a maximum number of
   entries to return.


4.5.1.5. SearchRequest.timeLimit

   A time limit that restricts the maximum time (in seconds) allowed for
   a Search. A value of zero in this field indicates that no client-
   requested time limit restrictions are in effect for the Search.
   Servers may also enforce a maximum time limit for the Search.


4.5.1.6. SearchRequest.typesOnly

   An indicator as to whether Search results are to contain both
   attribute descriptions and values, or just attribute descriptions.
   Setting this field to TRUE causes only attribute descriptions (no
   values) to be returned. Setting this field to FALSE causes both
   attribute descriptions and values to be returned.













Sermersheim      Internet-Draft - Expires April 2006             Page 21 
              Lightweight Directory Access Protocol Version 3

4.5.1.7. SearchRequest.filter

   A filter that defines the conditions that must be fulfilled in order
   for the Search to match a given entry.

   The 'and', 'or' and 'not' choices can be used to form combinations of
   filters. At least one filter element MUST be present in an 'and' or
   'or' choice. The others match against individual attribute values of
   entries in the scope of the Search. (Implementor's note: the 'not'
   filter is an example of a tagged choice in an implicitly-tagged
   module. In BER this is treated as if the tag was explicit.)

   A server MUST evaluate filters according to the three-valued logic of
   [X.511] (1993) Clause 7.8.1. In summary, a filter is evaluated to
   either "TRUE", "FALSE" or "Undefined". If the filter evaluates to
   TRUE for a particular entry, then the attributes of that entry are
   returned as part of the Search result (subject to any applicable
   access control restrictions). If the filter evaluates to FALSE or
   Undefined, then the entry is ignored for the Search.

   A filter of the "and" choice is TRUE if all the filters in the SET OF
   evaluate to TRUE, FALSE if at least one filter is FALSE, and
   otherwise Undefined. A filter of the "or" choice is FALSE if all of
   the filters in the SET OF evaluate to FALSE, TRUE if at least one
   filter is TRUE, and Undefined otherwise. A filter of the 'not' choice
   is TRUE if the filter being negated is FALSE, FALSE if it is TRUE,
   and Undefined if it is Undefined.

   A filter item evaluates to Undefined when the server would not be
   able to determine whether the assertion value matches an entry.
   Examples include:

   - An attribute description in an equalityMatch, substrings,
     greaterOrEqual, lessOrEqual, approxMatch or extensibleMatch
     filter is not recognized by the server.

   - The attribute type does not define the appropriate matching
     rule.

   - A MatchingRuleId in the extensibleMatch is not recognized by
     the server or is not valid for the attribute type.

   - The type of filtering requested is not implemented.

   - The assertion value is invalid.

   For example, if a server did not recognize the attribute type
   shoeSize, the filters (shoeSize=*), (shoeSize=12), (shoeSize>=12) and
   (shoeSize<=12) would each evaluate to Undefined.

   Servers MUST NOT return errors if attribute descriptions or matching
   rule ids are not recognized, assertion values are invalid, or the
   assertion syntax is not supported. More details of filter processing
   are given in Clause 7.8 of [X.511].

Sermersheim      Internet-Draft - Expires April 2006             Page 22 
              Lightweight Directory Access Protocol Version 3



4.5.1.7.1. SearchRequest.filter.equalityMatch

   The matching rule for an equalityMatch filter is defined by the
   EQUALITY matching rule for the attribute type or subtype. The filter
   is TRUE when the EQUALITY rule returns TRUE as applied to the
   attribute or subtype and the asserted value.


4.5.1.7.2. SearchRequest.filter.substrings

   There SHALL be at most one 'initial', and at most one 'final' in the
   'substrings' of a SubstringFilter. If 'initial' is present, it SHALL
   be the first element of 'substrings'. If 'final' is present, it SHALL
   be the last element of 'substrings'.

   The matching rule for an AssertionValue in a substrings filter item
   is defined by the SUBSTR matching rule for the attribute type or
   subtype. The filter is TRUE when the SUBSTR rule returns TRUE as
   applied to the attribute or subtype and the asserted value.

   Note that the AssertionValue in a substrings filter item conforms to
   the assertion syntax of the EQUALITY matching rule for the attribute
   type rather than the assertion syntax of the SUBSTR matching rule for
   the attribute type. Conceptually, the entire SubstringFilter is
   converted into an assertion value of the substrings matching rule
   prior to applying the rule.


4.5.1.7.3. SearchRequest.filter.greaterOrEqual

   The matching rule for a greaterOrEqual filter is defined by the
   ORDERING matching rule for the attribute type or subtype. The filter
   is TRUE when the ORDERING rule returns FALSE as applied to the
   attribute or subtype and the asserted value.


4.5.1.7.4. SearchRequest.filter.lessOrEqual

   The matching rules for a lessOrEqual filter are defined by the
   ORDERING and EQUALITY matching rules for the attribute type or
   subtype. The filter is TRUE when either the ORDERING or EQUALITY rule
   returns TRUE as applied to the attribute or subtype and the asserted
   value.


4.5.1.7.5. SearchRequest.filter.present

   A present filter is TRUE when there is an attribute or subtype of the
   specified attribute description present in an entry, FALSE when no
   attribute or subtype of the specified attribute description is
   present in an entry, and Undefined otherwise.


Sermersheim      Internet-Draft - Expires April 2006             Page 23 
              Lightweight Directory Access Protocol Version 3


4.5.1.7.6. SearchRequest.filter.approxMatch

   An approxMatch filter is TRUE when there is a value of the attribute
   type or subtype for which some locally-defined approximate matching
   algorithm (e.g. spelling variations, phonetic match, etc.) returns
   TRUE. If a value matches for equality, it also satisfies an
   approximate match. If approximate matching is not supported for the
   attribute, this filter item should be treated as an equalityMatch.


4.5.1.7.7. SearchRequest.filter.extensibleMatch

   The fields of the extensibleMatch filter item are evaluated as
   follows:

   - If the matchingRule field is absent, the type field MUST be
     present, and an equality match is performed for that type.

   - If the type field is absent and the matchingRule is present, the
     matchValue is compared against all attributes in an entry which
     support that matchingRule.

   - If the type field is present and the matchingRule is present, the
     matchValue is compared against the specified attribute type and
     its subtypes.

   - If the dnAttributes field is set to TRUE, the match is
     additionally applied against all the AttributeValueAssertions in
     an entry's distinguished name, and evaluates to TRUE if there is
     at least one attribute or subtype in the distinguished name for
     which the filter item evaluates to TRUE. The dnAttributes field is
     present to alleviate the need for multiple versions of generic
     matching rules (such as word matching), where one applies to
     entries and another applies to entries and DN attributes as well.

   The matchingRule used for evaluation determines the syntax for the
   assertion value. Once the matchingRule and attribute(s) have been
   determined, the filter item evaluates to TRUE if it matches at least
   one attribute type or subtype in the entry, FALSE if it does not
   match any attribute type or subtype in the entry, and Undefined if
   the matchingRule is not recognized, the matchingRule is unsuitable
   for use with the specified type, or the assertionValue is invalid.


4.5.1.7. SearchRequest.attributes

   A selection list of the attributes to be returned from each entry
   which matches the search filter. Attributes which are subtypes of
   listed attributes are implicitly included. LDAPString values of this
   field are constrained to the following Augmented Backus-Naur Form
   ([ABNF]):

     attributeSelector = attributedescription / selectorspecial

Sermersheim      Internet-Draft - Expires April 2006             Page 24 
              Lightweight Directory Access Protocol Version 3


     selectorspecial = noattrs / alluserattrs

     noattrs = %x31.2E.31 ; "1.1"

     alluserattrs = %x2A ; asterisk ("*")

     The <attributedescription> production is defined in Section 2.5 of
     [Models].

   There are three special cases which may appear in the attributes
   selection list:

     - an empty list with no attributes,

     - a list containing "*" (with zero or more attribute
        descriptions), and

     - a list containing only "1.1".

     An empty list requests the return of all user attributes.

     A list containing "*" requests the return of all user attributes
     in addition to other listed (operational) attributes.

     A list containing only the OID "1.1" indicates that no attributes
     are to be returned. If "1.1" is provided with other
     attributeSelector values, the "1.1" attributeSelector is ignored.
     This OID was chosen because it does not (and can not) correspond
     to any attribute in use.

   Client implementors should note that even if all user attributes are
   requested, some attributes and/or attribute values of the entry may
   not be included in Search results due to access controls or other
   restrictions. Furthermore, servers will not return operational
   attributes, such as objectClasses or attributeTypes, unless they are
   listed by name. Operational attributes are described in [Models].

   Attributes are returned at most once in an entry. If an attribute
   description is named more than once in the list, the subsequent names
   are ignored. If an attribute description in the list is not
   recognized, it is ignored by the server.


4.5.2. Search Result

   The results of the Search operation are returned as zero or more
   SearchResultEntry and/or SearchResultReference messages, followed by
   a single SearchResultDone message.

        SearchResultEntry ::= [APPLICATION 4] SEQUENCE {
             objectName      LDAPDN,
             attributes      PartialAttributeList }


Sermersheim      Internet-Draft - Expires April 2006             Page 25 
              Lightweight Directory Access Protocol Version 3

        PartialAttributeList ::= SEQUENCE OF
                             partialAttribute PartialAttribute

        SearchResultReference ::= [APPLICATION 19] SEQUENCE
                                  SIZE (1..MAX) OF uri URI

        SearchResultDone ::= [APPLICATION 5] LDAPResult

   Each SearchResultEntry represents an entry found during the Search.
   Each SearchResultReference represents an area not yet explored during
   the Search. The SearchResultEntry and SearchResultReference messages
   may come in any order. Following all the SearchResultReference and
   SearchResultEntry responses, the server returns a SearchResultDone
   response, which contains an indication of success, or detailing any
   errors that have occurred.

   Each entry returned in a SearchResultEntry will contain all
   appropriate attributes as specified in the attributes field of the
   Search Request, subject to access control and other administrative
   policy. Note that the PartialAttributeList may hold zero elements.
   This may happen when none of the attributes of an entry were
   requested, or could be returned. Note also that the partialAttribute
   vals set may hold zero elements. This may happen when typesOnly is
   requested, access controls prevent the return of values, or other
   reasons.

   Some attributes may be constructed by the server and appear in a
   SearchResultEntry attribute list, although they are not stored
   attributes of an entry. Clients SHOULD NOT assume that all attributes
   can be modified, even if permitted by access control.

   If the server's schema defines short names [Models] for an attribute
   type then the server SHOULD use one of those names in attribute
   descriptions for that attribute type (in preference to using the
   <numericoid> [Models] format of the attribute type's object
   identifier). The server SHOULD NOT use the short name if that name is
   known by the server to be ambiguous, or otherwise likely to cause
   interoperability problems.


4.5.3. Continuation References in the Search Result

   If the server was able to locate the entry referred to by the
   baseObject but was unable or unwilling to search one or more non-
   local entries, the server may return one or more
   SearchResultReference messages, each containing a reference to
   another set of servers for continuing the operation. A server MUST
   NOT return any SearchResultReference messages if it has not located
   the baseObject and thus has not searched any entries; in this case it
   would return a SearchResultDone containing either a referral or
   noSuchObject result code (depending on the server's knowledge of the
   entry named in the baseObject).



Sermersheim      Internet-Draft - Expires April 2006             Page 26 
              Lightweight Directory Access Protocol Version 3

   If a server holds a copy or partial copy of the subordinate naming
   context (Section 5 of [Models]), it may use the search filter to
   determine whether or not to return a SearchResultReference response.
   Otherwise SearchResultReference responses are always returned when in
   scope.

   The SearchResultReference is of the same data type as the Referral.

   If the client wishes to progress the Search, it issues a new Search
   operation for each SearchResultReference that is returned. If
   multiple URIs are present, the client assumes that any supported URI
   may be used to progress the operation.

   Clients that follow search continuation references MUST ensure that
   they do not loop between servers. They MUST NOT repeatedly contact
   the same server for the same request with the same parameters. Some
   clients use a counter that is incremented each time search result
   reference handling occurs for an operation, and these kinds of
   clients MUST be able to handle at least ten nested referrals while
   progressing the operation.

   Note that the Abandon operation described in Section 4.11 applies
   only to a particular operation sent at the LDAP message layer between
   a client and server. The client must abandon subsequent Search
   operations it wishes to individually.

   A URI for a server implementing LDAP and accessible via [TCP]/[IP]
   (v4 or v6) is written as an LDAP URL according to [LDAPURL].

   SearchResultReference values which are LDAP URLs follow these rules:

   - The <dn> part of the LDAP URL MUST be present, with the new target
     object name. The client uses this name when following the
     reference.

   - Some servers (e.g. participating in distributed indexing) may
     provide a different filter in the LDAP URL.

   - If the <filter> part of the LDAP URL is present, the client uses
     this filter in its next request to progress this Search, and if it
     is not present the client uses the same filter as it used for that
     Search.

   - If the originating search scope was singleLevel, the <scope> part
     of the LDAP URL will be "base".

   - It is RECOMMENDED that the <scope> part be present to avoid
     ambiguity. In the absence of a <scope> part, the scope of the
     original Search request is assumed.

   - Other aspects of the new Search request may be the same as or
     different from the Search request which generated the
     SearchResultReference.


Sermersheim      Internet-Draft - Expires April 2006             Page 27 
              Lightweight Directory Access Protocol Version 3

   - The name of an unexplored subtree in a SearchResultReference need
     not be subordinate to the base object.

   Other kinds of URIs may be returned. The syntax and semantics of such
   URIs is left to future specifications. Clients may ignore URIs that
   they do not support.

   UTF-8 encoded characters appearing in the string representation of a
   DN, search filter, or other fields of the referral value may not be
   legal for URIs (e.g. spaces) and MUST be escaped using the % method
   in [URI].



4.5.3.1. Examples

   For example, suppose the contacted server (hosta) holds the entry
   <DC=Example,DC=NET> and the entry <CN=Manager,DC=Example,DC=NET>. It
   knows that both LDAP servers (hostb) and (hostc) hold
   <OU=People,DC=Example,DC=NET> (one is the master and the other server
   a shadow), and that LDAP-capable server (hostd) holds the subtree
   <OU=Roles,DC=Example,DC=NET>. If a wholeSubtree Search of
   <DC=Example,DC=NET> is requested to the contacted server, it may
   return the following:

     SearchResultEntry for DC=Example,DC=NET
     SearchResultEntry for CN=Manager,DC=Example,DC=NET
     SearchResultReference {
       ldap://hostb/OU=People,DC=Example,DC=NET??sub
       ldap://hostc/OU=People,DC=Example,DC=NET??sub }
     SearchResultReference {
       ldap://hostd/OU=Roles,DC=Example,DC=NET??sub }
     SearchResultDone (success)

   Client implementors should note that when following a
   SearchResultReference, additional SearchResultReference may be
   generated. Continuing the example, if the client contacted the server
   (hostb) and issued the Search request for the subtree
   <OU=People,DC=Example,DC=NET>, the server might respond as follows:

     SearchResultEntry for OU=People,DC=Example,DC=NET
     SearchResultReference {
       ldap://hoste/OU=Managers,OU=People,DC=Example,DC=NET??sub }
     SearchResultReference {
       ldap://hostf/OU=Consultants,OU=People,DC=Example,DC=NET??sub }
     SearchResultDone (success)

   Similarly, if a singleLevel Search of <DC=Example,DC=NET> is
   requested to the contacted server, it may return the following:






Sermersheim      Internet-Draft - Expires April 2006             Page 28 
              Lightweight Directory Access Protocol Version 3

     SearchResultEntry for CN=Manager,DC=Example,DC=NET
     SearchResultReference {
       ldap://hostb/OU=People,DC=Example,DC=NET??base
       ldap://hostc/OU=People,DC=Example,DC=NET??base }
     SearchResultReference {
       ldap://hostd/OU=Roles,DC=Example,DC=NET??base }
     SearchResultDone (success)

   If the contacted server does not hold the base object for the Search,
   but has knowledge of its possible location, then it may return a
   referral to the client. In this case, if the client requests a
   subtree Search of <DC=Example,DC=ORG> to hosta, the server returns a
   SearchResultDone containing a referral.

     SearchResultDone (referral) {
       ldap://hostg/DC=Example,DC=ORG??sub }


4.6. Modify Operation

   The Modify operation allows a client to request that a modification
   of an entry be performed on its behalf by a server. The Modify
   Request is defined as follows:

        ModifyRequest ::= [APPLICATION 6] SEQUENCE {
             object          LDAPDN,
             changes         SEQUENCE OF change SEQUENCE {
                  operation       ENUMERATED {
                       add     (0),
                       delete  (1),
                       replace (2),
                       ... },
                  modification    PartialAttribute } }

   Fields of the Modify Request are:

   - object: The value of this field contains the name of the entry to
     be modified. The server SHALL NOT perform any alias dereferencing
     in determining the object to be modified.

   - changes: A list of modifications to be performed on the entry. The
     entire list of modifications MUST be performed in the order they
     are listed as a single atomic operation. While individual
     modifications may violate certain aspects of the directory schema
     (such as the object class definition and DIT content rule), the
     resulting entry after the entire list of modifications is
     performed MUST conform to the requirements of the directory model
     and controlling schema [Models].

     -  operation: Used to specify the type of modification being
        performed. Each operation type acts on the following
        modification. The values of this field have the following
        semantics respectively:


Sermersheim      Internet-Draft - Expires April 2006             Page 29 
              Lightweight Directory Access Protocol Version 3

           add: add values listed to the modification attribute,
           creating the attribute if necessary;

           delete: delete values listed from the modification attribute.
           If no values are listed, or if all current values of the
           attribute are listed, the entire attribute is removed;

           replace: replace all existing values of the modification
           attribute with the new values listed, creating the attribute
           if it did not already exist. A replace with no value will
           delete the entire attribute if it exists, and is ignored if
           the attribute does not exist.

     -  modification: A PartialAttribute (which may have an empty SET
        of vals) used to hold the attribute type or attribute type and
        values being modified.

   Upon receipt of a Modify Request, the server attempts to perform the
   necessary modifications to the DIT and returns the result in a Modify
   Response, defined as follows:

        ModifyResponse ::= [APPLICATION 7] LDAPResult

   The server will return to the client a single Modify Response
   indicating either the successful completion of the DIT modification,
   or the reason that the modification failed. Due to the requirement
   for atomicity in applying the list of modifications in the Modify
   Request, the client may expect that no modifications of the DIT have
   been performed if the Modify Response received indicates any sort of
   error, and that all requested modifications have been performed if
   the Modify Response indicates successful completion of the Modify
   operation. Whether the modification was applied or not cannot be
   determined by the client if the Modify Response was not received
   (e.g. the LDAP session was terminated or the Modify operation was
   abandoned).

   Servers MUST ensure that entries conform to user and system schema
   rules or other data model constraints. The Modify operation cannot be
   used to remove from an entry any of its distinguished values, i.e.
   those values which form the entry's relative distinguished name. An
   attempt to do so will result in the server returning the
   notAllowedOnRDN result code. The Modify DN operation described in
   Section 4.9 is used to rename an entry.

   For attribute types which specify no equality matching, the rules in
   Section 2.5.1 of [Models] are followed.

   Note that due to the simplifications made in LDAP, there is not a
   direct mapping of the changes in an LDAP ModifyRequest onto the
   changes of a DAP ModifyEntry operation, and different implementations
   of LDAP-DAP gateways may use different means of representing the
   change. If successful, the final effect of the operations on the
   entry MUST be identical.


Sermersheim      Internet-Draft - Expires April 2006             Page 30 
              Lightweight Directory Access Protocol Version 3


4.7. Add Operation

   The Add operation allows a client to request the addition of an entry
   into the Directory. The Add Request is defined as follows:

        AddRequest ::= [APPLICATION 8] SEQUENCE {
             entry           LDAPDN,
             attributes      AttributeList }

        AttributeList ::= SEQUENCE OF attribute Attribute

   Fields of the Add Request are:

   - entry: the name of the entry to be added. The server SHALL NOT
     dereference any aliases in locating the entry to be added.

   - attributes: the list of attributes that, along with those from the
     RDN, make up the content of the entry being added. Clients MAY or
     MAY NOT include the RDN attribute(s) in this list. Clients MUST
     NOT supply NO-USER-MODIFICATION attributes such as the
     createTimestamp or creatorsName attributes, since the server
     maintains these automatically.

   Servers MUST ensure that entries conform to user and system schema
   rules or other data model constraints. For attribute types which
   specify no equality matching, the rules in Section 2.5.1 of [Models]
   are followed (this applies to the naming attribute in addition to any
   multi-valued attributes being added).

   The entry named in the entry field of the AddRequest MUST NOT exist
   for the AddRequest to succeed. The immediate superior (parent) of an
   object or alias entry to be added MUST exist. For example, if the
   client attempted to add <CN=JS,DC=Example,DC=NET>, the
   <DC=Example,DC=NET> entry did not exist, and the <DC=NET> entry did
   exist, then the server would return the noSuchObject result code with
   the matchedDN field containing <DC=NET>.

   Upon receipt of an Add Request, a server will attempt to add the
   requested entry. The result of the Add attempt will be returned to
   the client in the Add Response, defined as follows:

        AddResponse ::= [APPLICATION 9] LDAPResult

   A response of success indicates that the new entry has been added to
   the Directory.


4.8. Delete Operation

   The Delete operation allows a client to request the removal of an
   entry from the Directory. The Delete Request is defined as follows:

        DelRequest ::= [APPLICATION 10] LDAPDN

Sermersheim      Internet-Draft - Expires April 2006             Page 31 
              Lightweight Directory Access Protocol Version 3


   The Delete Request consists of the name of the entry to be deleted.
   The server SHALL NOT dereference aliases while resolving the name of
   the target entry to be removed.

   Only leaf entries (those with no subordinate entries) can be deleted
   with this operation.

   Upon receipt of a Delete Request, a server will attempt to perform
   the entry removal requested and return the result in the Delete
   Response defined as follows:

        DelResponse ::= [APPLICATION 11] LDAPResult


4.9. Modify DN Operation

   The Modify DN operation allows a client to change the Relative
   Distinguished Name (RDN) of an entry in the Directory, and/or to move
   a subtree of entries to a new location in the Directory. The Modify
   DN Request is defined as follows:

        ModifyDNRequest ::= [APPLICATION 12] SEQUENCE {
             entry           LDAPDN,
             newrdn          RelativeLDAPDN,
             deleteoldrdn    BOOLEAN,
             newSuperior     [0] LDAPDN OPTIONAL }

   Fields of the Modify DN Request are:

   - entry: the name of the entry to be changed. This entry may or may
     not have subordinate entries.

   - newrdn: the new RDN of the entry. The value of the old RDN is
     supplied when moving the entry to a new superior without changing
     its RDN. Attribute values of the new RDN not matching any
     attribute value of the entry are added to the entry and an
     appropriate error is returned if this fails.

   - deleteoldrdn: a boolean field that controls whether the old RDN
     attribute values are to be retained as attributes of the entry, or
     deleted from the entry.

   - newSuperior: if present, this is the name of an existing object
     entry which becomes the immediate superior (parent) of the
     existing entry.

   The server SHALL NOT dereference any aliases in locating the objects
   named in entry or newSuperior.

   Upon receipt of a ModifyDNRequest, a server will attempt to perform
   the name change and return the result in the Modify DN Response,
   defined as follows:


Sermersheim      Internet-Draft - Expires April 2006             Page 32 
              Lightweight Directory Access Protocol Version 3

        ModifyDNResponse ::= [APPLICATION 13] LDAPResult

   For example, if the entry named in the entry field was <cn=John
   Smith,c=US>, the newrdn field was <cn=John Cougar Smith>, and the
   newSuperior field was absent, then this operation would attempt to
   rename the entry to be <cn=John Cougar Smith,c=US>. If there was
   already an entry with that name, the operation would fail with the
   entryAlreadyExists result code.

   Servers MUST ensure that entries conform to user and system schema
   rules or other data model constraints. For attribute types which
   specify no equality matching, the rules in Section 2.5.1 of [Models]
   are followed (this pertains to newrdn and deleteoldrdn).

   The object named in newSuperior MUST exist. For example, if the
   client attempted to add <CN=JS,DC=Example,DC=NET>, the
   <DC=Example,DC=NET> entry did not exist, and the <DC=NET> entry did
   exist, then the server would return the noSuchObject result code with
   the matchedDN field containing <DC=NET>.

   If the deleteoldrdn field is TRUE, the attribute values forming the
   old RDN but not the new RDN are deleted from the entry. If the
   deleteoldrdn field is FALSE, the attribute values forming the old RDN
   will be retained as non-distinguished attribute values of the entry.

   Note that X.500 restricts the ModifyDN operation to only affect
   entries that are contained within a single server. If the LDAP server
   is mapped onto DAP, then this restriction will apply, and the
   affectsMultipleDSAs result code will be returned if this error
   occurred. In general, clients MUST NOT expect to be able to perform
   arbitrary movements of entries and subtrees between servers or
   between naming contexts.


4.10. Compare Operation

   The Compare operation allows a client to compare an assertion value
   with the values of a particular attribute in a particular entry in
   the Directory. The Compare Request is defined as follows:

        CompareRequest ::= [APPLICATION 14] SEQUENCE {
             entry           LDAPDN,
             ava             AttributeValueAssertion }

   Fields of the Compare Request are:

   - entry: the name of the entry to be compared. The server SHALL NOT
     dereference any aliases in locating the entry to be compared.

   - ava: holds the attribute value assertion to be compared.

   Upon receipt of a Compare Request, a server will attempt to perform
   the requested comparison and return the result in the Compare
   Response, defined as follows:

Sermersheim      Internet-Draft - Expires April 2006             Page 33 
              Lightweight Directory Access Protocol Version 3


        CompareResponse ::= [APPLICATION 15] LDAPResult

   The resultCode is set to compareTrue, compareFalse, or an appropriate
   error. compareTrue indicates that the assertion value in the ava
   field matches a value of the attribute or subtype according to the
   attribute's EQUALITY matching rule. compareFalse indicates that the
   assertion value in the ava field and the values of the attribute or
   subtype did not match. Other result codes indicate either that the
   result of the comparison was Undefined (Section 4.5.1), or that some
   error occurred.

   Note that some directory systems may establish access controls which
   permit the values of certain attributes (such as userPassword) to be
   compared but not interrogated by other means.


4.11. Abandon Operation

   The function of the Abandon operation is to allow a client to request
   that the server abandon an uncompleted operation. The Abandon Request
   is defined as follows:

        AbandonRequest ::= [APPLICATION 16] MessageID

   The MessageID is that of an operation which was requested earlier at
   this LDAP message layer. The Abandon request itself has its own
   MessageID. This is distinct from the MessageID of the earlier
   operation being abandoned.

   There is no response defined in the Abandon operation. Upon receipt
   of an AbandonRequest, the server MAY abandon the operation identified
   by the MessageID. Since the client cannot tell the difference between
   a successfully abandoned operation and an uncompleted operation, the
   application of the Abandon operation is limited to uses where the
   client does not require an indication of its outcome.

   Abandon, Bind, Unbind, and StartTLS operations cannot be abandoned.

   In the event that a server receives an Abandon Request on a Search
   operation in the midst of transmitting responses to the Search, that
   server MUST cease transmitting entry responses to the abandoned
   request immediately, and MUST NOT send the SearchResultDone. Of
   course, the server MUST ensure that only properly encoded LDAPMessage
   PDUs are transmitted.

   The ability to abandon other (particularly update) operations is at
   the discretion of the server.

   Clients should not send Abandon requests for the same operation
   multiple times, and MUST also be prepared to receive results from
   operations it has abandoned (since these may have been in transit
   when the Abandon was requested, or are not able to be abandoned).


Sermersheim      Internet-Draft - Expires April 2006             Page 34 
              Lightweight Directory Access Protocol Version 3

   Servers MUST discard Abandon requests for message IDs they do not
   recognize, for operations which cannot be abandoned, and for
   operations which have already been abandoned.


4.12. Extended Operation

   The Extended operation allows additional operations to be defined for
   services not already available in the protocol. For example, to Add
   operations to install transport layer security (see Section 4.14).

   The Extended operation allows clients to make requests and receive
   responses with predefined syntaxes and semantics. These may be
   defined in RFCs or be private to particular implementations.

   Each Extended operation consists of an Extended request and an
   Extended response.

        ExtendedRequest ::= [APPLICATION 23] SEQUENCE {
             requestName      [0] LDAPOID,
             requestValue     [1] OCTET STRING OPTIONAL }

   The requestName is a dotted-decimal representation of the unique
   OBJECT IDENTIFIER corresponding to the request. The requestValue is
   information in a form defined by that request, encapsulated inside an
   OCTET STRING.

   The server will respond to this with an LDAPMessage containing an
   ExtendedResponse.

        ExtendedResponse ::= [APPLICATION 24] SEQUENCE {
             COMPONENTS OF LDAPResult,
             responseName     [10] LDAPOID OPTIONAL,
             responseValue    [11] OCTET STRING OPTIONAL }

   The responseName field, when present, contains an LDAPOID which is
   unique for this extended operation or response.  This field is
   optional (even when the extension specification specifies an LDAPOID
   to be returned in the field).  The field will be absent whenever the
   server is unable or unwilling to determine the appropriate LDAPOID to
   return, for instance when the requestName cannot be parsed or its
   value is not recognized.

   Where the requestName is not recognized, the server returns
   protocolError (The server may return protocolError in other cases).

   The requestValue and responseValue fields contain information
   associated with the operation. The format of these fields is defined
   by the specification of the Extended operation. Implementations MUST
   be prepared to handle arbitrary contents of these fields, including
   zero bytes. Values that are defined in terms of ASN.1 and BER encoded
   according to Section 5.1, also follow the extensibility rules in
   Section 4.


Sermersheim      Internet-Draft - Expires April 2006             Page 35 
              Lightweight Directory Access Protocol Version 3

   Servers list the requestName of Extended Requests they recognize in
   the 'supportedExtension' attribute in the root DSE (Section 5.1 of
   [Models]).

   Extended operations may be specified in other documents. The
   specification of an Extended operation consists of:

   - the OBJECT IDENTIFIER assigned to the requestName,

   - the OBJECT IDENTIFIER (if any) assigned to the responseName (note
     that the same OBJECT IDENTIFIER may be used for both the
     requestName and responseName),

   - the format of the contents of the requestValue and responseValue
     (if any), and

   - the semantics of the operation.


4.13. IntermediateResponse Message

   While the Search operation provides a mechanism to return multiple
   response messages for a single Search request, other operations, by
   nature, do not provide for multiple response messages.

   The IntermediateResponse message provides a general mechanism for
   defining single-request/multiple-response operations in LDAP. This
   message is intended to be used in conjunction with the Extended
   operation to define new single-request/multiple-response operations
   or in conjunction with a control when extending existing LDAP
   operations in a way that requires them to return Intermediate
   response information.

   It is intended that the definitions and descriptions of Extended
   operations and controls that make use of the IntermediateResponse
   message will define the circumstances when an IntermediateResponse
   message can be sent by a server and the associated meaning of an
   IntermediateResponse message sent in a particular circumstance.

        IntermediateResponse ::= [APPLICATION 25] SEQUENCE {
                responseName     [0] LDAPOID OPTIONAL,
                responseValue    [1] OCTET STRING OPTIONAL }

   IntermediateResponse messages SHALL NOT be returned to the client
   unless the client issues a request that specifically solicits their
   return. This document defines two forms of solicitation: Extended
   operation and request control. IntermediateResponse messages are
   specified in documents describing the manner in which they are
   solicited (i.e. in the Extended operation or request control
   specification that uses them). These specifications include:

   - the OBJECT IDENTIFIER (if any) assigned to the responseName,

   - the format of the contents of the responseValue (if any), and

Sermersheim      Internet-Draft - Expires April 2006             Page 36 
              Lightweight Directory Access Protocol Version 3


   - the semantics associated with the IntermediateResponse message.

   Extensions that allow the return of multiple types of
   IntermediateResponse messages SHALL identify those types using unique
   responseName values (note that one of these may specify no value).

   Sections 4.13.1 and 4.13.2 describe additional requirements on the
   inclusion of responseName and responseValue in IntermediateResponse
   messages.


4.13.1. Usage with LDAP ExtendedRequest and ExtendedResponse

   A single-request/multiple-response operation may be defined using a
   single ExtendedRequest message to solicit zero or more
   IntermediateResponse messages of one or more kinds followed by an
   ExtendedResponse message.


4.13.2. Usage with LDAP Request Controls

   A control's semantics may include the return of zero or more
   IntermediateResponse messages prior to returning the final result
   code for the operation.  One or more kinds of IntermediateResponse
   messages may be sent in response to a request control.

   All IntermediateResponse messages associated with request controls
   SHALL include a responseName.  This requirement ensures that the
   client can correctly identify the source of IntermediateResponse
   messages when:

   - two or more controls using IntermediateResponse messages are
     included in a request for any LDAP operation or

   - one or more controls using IntermediateResponse messages are
     included in a request with an LDAP Extended operation that uses
     IntermediateResponse messages.


4.14. StartTLS Operation

   The Start Transport Layer Security (StartTLS) operation's purpose is
   to initiate installation of a TLS layer. The StartTLS operation is
   defined using the Extended operation mechanism described in Section
   4.12.









Sermersheim      Internet-Draft - Expires April 2006             Page 37 
              Lightweight Directory Access Protocol Version 3

4.14.1. StartTLS Request

   A client requests TLS establishment by transmitting a StartTLS
   request message to the server. The StartTLS request is defined in
   terms of an ExtendedRequest. The requestName is
   "1.3.6.1.4.1.1466.20037", and the requestValue field is always
   absent.

   The client MUST NOT send any LDAP PDUs at this LDAP message layer
   following this request until it receives a StartTLS Extended response
   and, in the case of a successful response, completes TLS
   negotiations.

   Detected sequencing problems (particularly those detailed in Section
   3.1.1 of [AuthMeth]) result in the resultCode being set to
   operationsError.

   If the server does not support TLS (whether by design or by current
   configuration), it returns with the resultCode set to protocolError
   as described in Section 4.12.


4.14.2. StartTLS Response

   When a StartTLS request is received, servers supporting the operation
   MUST return a StartTLS response message to the requestor. The
   responseName is "1.3.6.1.4.1.1466.20037" when provided (See 4.12).
   The responseValue is always absent.

   If the server is willing and able to negotiate TLS, it returns the
   StartTLS response with the resultCode set to success. Upon client
   receipt of a successful StartTLS response, protocol peers may
   commence with TLS negotiation as discussed in Section 3 of
   [AuthMeth].

   If the server is otherwise unwilling or unable to perform this
   operation, the server is to return an appropriate result code
   indicating the nature of the problem.  For example, if the TLS
   subsystem is not presently available, the server may indicate so by
   returning with the resultCode set to unavailable. In cases where a
   non-success result code is returned, the LDAP session is left without
   a TLS layer.


4.14.3. Removal of the TLS Layer

   Either the client or server MAY remove the TLS layer and leave the
   LDAP message layer intact by sending and receiving a TLS closure
   alert.




Sermersheim      Internet-Draft - Expires April 2006             Page 38 
              Lightweight Directory Access Protocol Version 3

   The initiating protocol peer sends the TLS closure alert and MUST
   wait until it receives a TLS closure alert from the other peer before
   sending further LDAP PDUs.

   When a protocol peer receives the initial TLS closure alert, it may
   choose to allow the LDAP message layer to remain intact. In this
   case, it MUST immediately transmit a TLS closure alert. Following
   this, it MAY send and receive LDAP PDUs.

   Protocol peers MAY terminate the LDAP session after sending or
   receiving a TLS closure alert.


5. Protocol Encoding, Connection, and Transfer

   This protocol is designed to run over connection-oriented, reliable
   transports, where the data stream is divided into octets (8-bit
   units), with each octet and each bit being significant.

   One underlying service, LDAP over TCP, is defined in Section
   5.2. This service is generally applicable to applications providing
   or consuming X.500-based directory services on the Internet. This
   specification was generally written with the TCP mapping in mind.
   Specifications detailing other mappings may encounter various
   obstacles.

   Implementations of LDAP over TCP MUST implement the mapping as
   described in Section 5.2.

   This table illustrates the relationship between the different layers
   involved in an exchange between two protocol peers:

               +----------------------+
               |  LDAP message layer  |
               +----------------------+ > LDAP PDUs
               +----------------------+ < data
               |      SASL layer      |
               +----------------------+ > SASL-protected data
               +----------------------+ < data
               |       TLS layer      |
   Application +----------------------+ > TLS-protected data
   ------------+----------------------+ < data
     Transport | transport connection |
               +----------------------+


5.1. Protocol Encoding

   The protocol elements of LDAP SHALL be encoded for exchange using the
   Basic Encoding Rules [BER] of [ASN.1] with the following
   restrictions:

   - Only the definite form of length encoding is used.


Sermersheim      Internet-Draft - Expires April 2006             Page 39 
              Lightweight Directory Access Protocol Version 3


   - OCTET STRING values are encoded in the primitive form only.

   - If the value of a BOOLEAN type is true, the encoding of the value
     octet is set to hex "FF".

   - If a value of a type is its default value, it is absent. Only some
     BOOLEAN and INTEGER types have default values in this protocol
     definition.

   These restrictions are meant to ease the overhead of encoding and
   decoding certain elements in BER.

   These restrictions do not apply to ASN.1 types encapsulated inside of
   OCTET STRING values, such as attribute values, unless otherwise
   stated.


5.2. Transmission Control Protocol (TCP)

   The encoded LDAPMessage PDUs are mapped directly onto the [TCP]
   bytestream using the BER-based encoding described in Section 5.1. It
   is recommended that server implementations running over the TCP
   provide a protocol listener on the Internet Assigned Numbers
   Authority (IANA)-assigned LDAP port, 389 [PortReg]. Servers may
   instead provide a listener on a different port number. Clients MUST
   support contacting servers on any valid TCP port.


5.3. Termination of the LDAP session

   Termination of the LDAP session is typically initiated by the client
   sending an UnbindRequest (Section 4.3), or by the server sending a
   Notice of Disconnection (Section 4.4.1). In these cases each protocol
   peer gracefully terminates the LDAP session by ceasing exchanges at
   the LDAP message layer, tearing down any SASL layer, tearing down any
   TLS layer, and closing the transport connection.

   A protocol peer may determine that the continuation of any
   communication would be pernicious, and in this case may abruptly
   terminate the session by ceasing communication and closing the
   transport connection.

   In either case, when the LDAP session is terminated, uncompleted
   operations are handled as specified in Section 3.1.


6. Security Considerations

   This version of the protocol provides facilities for simple
   authentication using a cleartext password, as well as any [SASL]
   mechanism. Installing SASL and/or TLS layers can provide integrity
   and other data security services.


Sermersheim      Internet-Draft - Expires April 2006             Page 40 
              Lightweight Directory Access Protocol Version 3

   It is also permitted that the server can return its credentials to
   the client, if it chooses to do so.

   Use of cleartext password is strongly discouraged where the
   underlying transport service cannot guarantee confidentiality and may
   result in disclosure of the password to unauthorized parties.

   Servers are encouraged to prevent directory modifications by clients
   that have authenticated anonymously [AuthMeth].

   Security considerations for authentication methods, SASL mechanisms,
   and TLS are described in [AuthMeth].

   It should be noted that SASL authentication exchanges do not provide
   data confidentiality nor integrity protection for the version or name
   fields of the BindRequest nor the resultCode, diagnosticMessage, or
   referral fields of the BindResponse nor of any information contained
   in controls attached to Bind requests or responses. Thus information
   contained in these fields SHOULD NOT be relied on unless otherwise
   protected (such as by establishing protections at the transport
   layer).

   Implementors should note that various security factors, including
   authentication and authorization information and data security
   services may change during the course of the LDAP session, or even
   during the performance of a particular operation.  For instance,
   credentials could expire, authorization identities or access controls
   could change, or the underlying security layer(s) could be replaced
   or terminated.  Implementations should be robust in the handling of
   changing security factors.
   In some cases, it may be appropriate to continue the operation even
   in light of security factor changes.  For instance, it may be
   appropriate to continue an Abandon operation regardless of the
   change, or to continue an operation when the change upgraded (or
   maintained) the security factor. In other cases, it may be
   appropriate to fail, or alter the processing of the operation. For
   instance, if confidential protections were removed, it would be
   appropriate to either fail a request to return sensitive data, or
   minimally, to exclude the return of sensitive data.

   Implementations which cache attributes and entries obtained via LDAP
   MUST ensure that access controls are maintained if that information
   is to be provided to multiple clients, since servers may have access
   control policies which prevent the return of entries or attributes in
   Search results except to particular authenticated clients. For
   example, caches could serve result information only to the client
   whose request caused it to be in the cache.








Sermersheim      Internet-Draft - Expires April 2006             Page 41 
              Lightweight Directory Access Protocol Version 3

   Servers may return referrals or Search result references which
   redirect clients to peer servers. It is possible for a rogue
   application to inject such referrals into the data stream in an
   attempt to redirect a client to a rogue server. Clients are advised
   to be aware of this, and possibly reject referrals when
   confidentiality measures are not in place. Clients are advised to
   reject referrals from the StartTLS operation.

   The matchedDN and diagnosticMessage fields, as well as some
   resultCode values (e.g., attributeOrValueExists and
   entryAlreadyExists), could disclose the presence or absence of
   specific data in the directory which is subject to access and other
   administrative controls. Server implementations should restrict
   access to protected information equally under both normal and error
   conditions.

   Protocol peers MUST be prepared to handle invalid and arbitrary
   length protocol encodings. Invalid protocol encodings include: BER
   encoding exceptions, format string and UTF-8 encoding exceptions,
   overflow exceptions, integer value exceptions, and binary mode on/off
   flag exceptions. The LDAPv3 PROTOS [PROTOS-LDAP] test suite provides
   excellent examples of these exceptions and test cases used to
   discover flaws.

   In the event that a protocol peer senses an attack which in its
   nature could cause damage due to further communication at any layer
   in the LDAP session, the protocol peer should abruptly terminate the
   LDAP session as described in Section 5.3.


7. Acknowledgements

   This document is based on RFC 2251 by Mark Wahl, Tim Howes, and Steve
   Kille. RFC 2251 was a product of the IETF ASID Working Group.

   It is also based on RFC 2830 by Jeff Hodges, RL "Bob" Morgan, and
   Mark Wahl. RFC 2830 was a product of the IETF LDAPEXT Working Group.

   It is also based on RFC 3771 by Roger Harrison, and Kurt Zeilenga.
   RFC 3771 was an individual submission to the IETF.

   This document is a product of the IETF LDAPBIS Working Group.
   Significant contributors of technical review and content include Kurt
   Zeilenga, Steven Legg, and Hallvard Furuseth.


8. Normative References

   [ABNF]    Crocker, D. and P. Overell, "Augmented BNF for Syntax
             Specifications: ABNF", draft-crocker-abnf-rfc2234bis-
             xx.txt, (a work in progress).




Sermersheim      Internet-Draft - Expires April 2006             Page 42 
              Lightweight Directory Access Protocol Version 3

   [ASN.1]   ITU-T Recommendation X.680 (07/2002) | ISO/IEC 8824-1:2002
             "Information Technology - Abstract Syntax Notation One
             (ASN.1): Specification of basic notation"

   [AuthMeth] Harrison, R., "LDAP: Authentication Methods and Connection
             Level Security Mechanisms", draft-ietf-ldapbis-authmeth-
             xx.txt, (a work in progress).

   [BER]     ITU-T Rec. X.690 (07/2002) | ISO/IEC 8825-1:2002,
             "Information technology - ASN.1 encoding rules:
             Specification of Basic Encoding Rules (BER), Canonical
             Encoding Rules (CER) and Distinguished Encoding Rules
             (DER)", 2002.

   [IP]      Postel, J., "Internet Protocol", STD5 and RFC 791,
             September 1981

   [ISO10646] Universal Multiple-Octet Coded Character Set (UCS) -
             Architecture and Basic Multilingual Plane, ISO/IEC 10646-1
             : 1993.

   [Keyword] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", RFC 2119, March 1997.

   [LDAPDN]  Zeilenga, K., "LDAP: String Representation of
             Distinguished Names", draft-ietf-ldapbis-dn-xx.txt, (a
             work in progress).

   [LDAPIANA] Zeilenga, K., "IANA Considerations for LDAP", draft-ietf-
             ldapbis-bcp64-xx.txt, (a work in progress).

   [LDAPURL] Smith, M., "LDAP: Uniform Resource Locator", draft-ietf-
             ldapbis-url-xx.txt, (a work in progress).

   [Models]  Zeilenga, K., "LDAP: Directory Information Models", draft-
             ietf-ldapbis-models-xx.txt (a work in progress).

   [Roadmap] Zeilenga, K., "LDAP: Technical Specification Road Map",
             draft-ietf-ldapbis-roadmap-xx.txt (a work in progress).

   [SASL]    Melnikov, A., "Simple Authentication and Security Layer",
             draft-ietf-sasl-rfc2222bis-xx.txt (a work in progress).

   [SASLPrep] Zeilenga, K., "Stringprep profile for user names and
             passwords", draft-ietf-sasl-saslprep-xx.txt, (a work in
             progress).

   [StringPrep] Hoffman P. and M. Blanchet, "Preparation of
             Internationalized Strings ('stringprep')", draft-hoffman-
             rfc3454bis-xx.txt, a work in progress.

   [Syntaxes] Legg, S., and K. Dally, "LDAP: Syntaxes and Matching
             Rules", draft-ietf-ldapbis-syntaxes-xx.txt, (a work in
             progress).

Sermersheim      Internet-Draft - Expires April 2006             Page 43 
              Lightweight Directory Access Protocol Version 3


   [TCP]     Postel, J., "Transmission Control Protocol", STD7 and RFC
             793, September 1981

   [TLS]     Dierks, T. and C. Allen. "The TLS Protocol Version 1.1",
             draft-ietf-tls-rfc2246-bis-xx.txt, a work in progress.

   [Unicode] The Unicode Consortium, "The Unicode Standard, Version
             3.2.0" is defined by "The Unicode Standard, Version 3.0"
             (Reading, MA, Addison-Wesley, 2000. ISBN 0-201-61633-5),
             as amended by the "Unicode Standard Annex #27: Unicode
             3.1" (http://www.unicode.org/reports/tr27/) and by the
             "Unicode Standard Annex #28: Unicode 3.2"
             (http://www.unicode.org/reports/tr28/).

   [URI]     Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
             Resource Identifiers (URI): Generic Syntax", RFC 2396,
             August 1998.

   [UTF-8]   Yergeau, F., "UTF-8, a transformation format of ISO
             10646", STD63 and RFC3629, November 2003.

   [X.500]   ITU-T Rec. X.500, "The Directory: Overview of Concepts,
             Models and Service", 1993.

   [X.501]   ITU-T Rec. X.501, "The Directory: Models", 1993.

   [X.511]   ITU-T Rec. X.511, "The Directory: Abstract Service
             Definition", 1993.


9. Informative References

   [Glossary] The Unicode Consortium, "Unicode Glossary",
             <http://www.unicode.org/glossary/>.

   [CharModel]  Whistler, K. and M. Davis, "Unicode Technical Report
             #17, Character Encoding Model", UTR17,
             <http://www.unicode.org/unicode/reports/tr17/>, August
             2000.

   [PROTOS-LDAP] University of Oulu, "PROTOS Test-Suite: c06-ldapv3"
             <http://www.ee.oulu.fi/research/ouspg/protos/testing/c06/l
             dapv3/>

   [PortReg] IANA, "Port Numbers",
             http://www.iana.org/assignments/port-numbers


10. IANA Considerations





Sermersheim      Internet-Draft - Expires April 2006             Page 44 
              Lightweight Directory Access Protocol Version 3

   It is requested that the Internet Assigned Numbers Authority (IANA)
   update the LDAP result code registry to indicate that this document
   provides the definitive technical specification for result codes 0-
   36, 48-54, 64-70, 80-90. It is also noted that one resultCode value
   (strongAuthRequired) has been renamed (to strongerAuthRequired).

   It is requested that the IANA update the LDAP Protocol Mechanism
   registry to indicate that this document and [AuthMeth] provides the
   definitive technical specification for the StartTLS
   (1.3.6.1.4.1.1466.20037) Extended operation.

   It is requested that the IANA update the occurrence of "RFC XXXX" in
   this section and Appendix B with this RFC number at publication.

   It is requested that IANA assign upon Standards Action an LDAP Object
   Identifier [LDAPIANA] to identify the ASN.1 module defined in this
   document.

        Subject: Request for LDAP Object Identifier Registration
        Person & email address to contact for further information:
             Jim Sermersheim <jimse@novell.com>
        Specification: RFC XXXX
        Author/Change Controller: IESG
        Comments:
             Identifies the LDAP ASN.1 module

   [[Note to RFC Editor: please replace the occurrence of <IANA-
   ASSIGNED-DIRECTORY-NUMBER> in Appendix B with the IANA assigned
   OID.]]


11. Editor's Address

   Jim Sermersheim
   Novell, Inc.
   1800 South Novell Place
   Provo, Utah 84606, USA
   jimse@novell.com
   +1 801 861-3088
















Sermersheim      Internet-Draft - Expires April 2006             Page 45 
              Lightweight Directory Access Protocol Version 3

Appendix A. LDAP Result Codes

   This normative appendix details additional considerations regarding
   LDAP result codes and provides a brief, general description of each
   LDAP result code enumerated in Section 4.1.9.

   Additional result codes MAY be defined for use with extensions
   [LDAPIANA]. Client implementations SHALL treat any result code which
   they do not recognize as an unknown error condition.

   The descriptions provided here do not fully account for result code
   substitutions used to prevent unauthorized disclosures (such as
   substitution of noSuchObject for insufficientAccessRights, or
   invalidCredentials for insufficientAccessRights).


A.1. Non-Error Result Codes

   These result codes (called "non-error" result codes) do not indicate
   an error condition:
        success (0),
        compareFalse (5),
        compareTrue (6),
        referral (10), and
        saslBindInProgress (14).

   The success, compareTrue, and compareFalse result codes indicate
   successful completion (and, hence, are referred to as "successful"
   result codes).

   The referral and saslBindInProgress result codes indicate the client
   needs to take additional action to complete the operation.


A.2. Result Codes

   Existing LDAP result codes are described as follows:

        success (0)
           Indicates the successful completion of an operation. Note:
           this code is not used with the Compare operation. See
           compareFalse (5) and compareTrue (6).

        operationsError (1)
           Indicates that the operation is not properly sequenced with
           relation to other operations (of same or different type).

           For example, this code is returned if the client attempts to
           StartTLS [TLS] while there are other uncompleted operations
           or if a TLS layer was already installed.

        protocolError (2)
           Indicates the server received data which is not well-formed.


Sermersheim      Internet-Draft - Expires April 2006             Page 46 
              Lightweight Directory Access Protocol Version 3

           For Bind operation only, this code is also used to indicate
           that the server does not support the requested protocol
           version.

           For Extended operations only, this code is also used to
           indicate that the server does not support (by design or
           configuration) the Extended operation associated with the
           requestName.

           For request operations specifying multiple controls, this may
           be used to indicate that the server cannot ignore the order
           of the controls as specified, or that the combination of the
           specified controls is invalid or unspecified.

        timeLimitExceeded (3)
           Indicates that the time limit specified by the client was
           exceeded before the operation could be completed.

        sizeLimitExceeded (4)
           Indicates that the size limit specified by the client was
           exceeded before the operation could be completed.

        compareFalse (5)
           Indicates that the Compare operation has successfully
           completed and the assertion has evaluated to FALSE or
           Undefined.

        compareTrue (6)
           Indicates that the Compare operation has successfully
           completed and the assertion has evaluated to TRUE.

        authMethodNotSupported (7)
           Indicates that the authentication method or mechanism is not
           supported.

        strongerAuthRequired (8)
           Indicates the server requires strong(er) authentication in
           order to complete the operation.

           When used with the Notice of Disconnection operation, this
           code indicates that the server has detected that an
           established security association between the client and
           server has unexpectedly failed or been compromised.

        referral (10)
           Indicates that a referral needs to be chased to complete the
           operation (see Section 4.1.10).

        adminLimitExceeded (11)
           Indicates that an administrative limit has been exceeded.

        unavailableCriticalExtension (12)
           Indicates a critical control is unrecognized (see Section
           4.1.11).

Sermersheim      Internet-Draft - Expires April 2006             Page 47 
              Lightweight Directory Access Protocol Version 3


        confidentialityRequired (13)
           Indicates that data confidentiality protections are required.

        saslBindInProgress (14)
           Indicates the server requires the client to send a new bind
           request, with the same SASL mechanism, to continue the
           authentication process (see Section 4.2).

        noSuchAttribute (16)
           Indicates that the named entry does not contain the specified
           attribute or attribute value.

        undefinedAttributeType (17)
           Indicates that a request field contains an unrecognized
           attribute description.

        inappropriateMatching (18)
           Indicates that an attempt was made (e.g. in an assertion) to
           use a matching rule not defined for the attribute type
           concerned.

        constraintViolation (19)
           Indicates that the client supplied an attribute value which
           does not conform to the constraints placed upon it by the
           data model.

           For example, this code is returned when multiple values are
           supplied to an attribute which has a SINGLE-VALUE constraint.

        attributeOrValueExists (20)
           Indicates that the client supplied an attribute or value to
           be added to an entry, but the attribute or value already
           exists.

        invalidAttributeSyntax (21)
           Indicates that a purported attribute value does not conform
           to the syntax of the attribute.

        noSuchObject (32)
           Indicates that the object does not exist in the DIT.

        aliasProblem (33)
           Indicates that an alias problem has occurred. For example,
           the code may used to indicate an alias has been dereferenced
           which names no object.

        invalidDNSyntax (34)
           Indicates that an LDAPDN or RelativeLDAPDN field (e.g. search
           base, target entry, ModifyDN newrdn, etc.) of a request does
           not conform to the required syntax or contains attribute
           values which do not conform to the syntax of the attribute's
           type.


Sermersheim      Internet-Draft - Expires April 2006             Page 48 
              Lightweight Directory Access Protocol Version 3


        aliasDereferencingProblem (36)
           Indicates that a problem occurred while dereferencing an
           alias. Typically an alias was encountered in a situation
           where it was not allowed or where access was denied.

        inappropriateAuthentication (48)
           Indicates the server requires the client which had attempted
           to bind anonymously or without supplying credentials to
           provide some form of credentials.

        invalidCredentials (49)
           Indicates that the provided credentials (e.g. the user's name
           and password) are invalid.

        insufficientAccessRights (50)
           Indicates that the client does not have sufficient access
           rights to perform the operation.

        busy (51)
           Indicates that the server is too busy to service the
           operation.

        unavailable (52)
           Indicates that the server is shutting down or a subsystem
           necessary to complete the operation is offline.

        unwillingToPerform (53)
           Indicates that the server is unwilling to perform the
           operation.

        loopDetect (54)
           Indicates that the server has detected an internal loop (e.g.
           while dereferencing aliases or chaining an operation).

        namingViolation (64)
           Indicates that the entry's name violates naming restrictions.

        objectClassViolation (65)
           Indicates that the entry violates object class restrictions.

        notAllowedOnNonLeaf (66)
           Indicates that the operation is inappropriately acting upon a
           non-leaf entry.

        notAllowedOnRDN (67)
           Indicates that the operation is inappropriately attempting to
           remove a value which forms the entry's relative distinguished
           name.

        entryAlreadyExists (68)
           Indicates that the request cannot be fulfilled (added, moved,
           or renamed) as the target entry already exists.


Sermersheim      Internet-Draft - Expires April 2006             Page 49 
              Lightweight Directory Access Protocol Version 3


        objectClassModsProhibited (69)
           Indicates that an attempt to modify the object class(es) of
           an entry's 'objectClass' attribute is prohibited.

           For example, this code is returned when a client attempts to
           modify the structural object class of an entry.

        affectsMultipleDSAs (71)
           Indicates that the operation cannot be performed as it would
           affect multiple servers (DSAs).

        other (80)
           Indicates the server has encountered an internal error.









































Sermersheim      Internet-Draft - Expires April 2006             Page 50 
              Lightweight Directory Access Protocol Version 3

Appendix B. Complete ASN.1 Definition

        This appendix is normative.

        Lightweight-Directory-Access-Protocol-V3 {1 3 6 1 1 <IANA-
   ASSIGNED-DIRECTORY-NUMBER>}
        -- Copyright (C) The Internet Society (2005). This version of
        -- this ASN.1 module is part of RFC XXXX; see the RFC itself
        -- for full legal notices.
        DEFINITIONS
        IMPLICIT TAGS
        EXTENSIBILITY IMPLIED ::=

        BEGIN

        LDAPMessage ::= SEQUENCE {
             messageID       MessageID,
             protocolOp      CHOICE {
                  bindRequest           BindRequest,
                  bindResponse          BindResponse,
                  unbindRequest         UnbindRequest,
                  searchRequest         SearchRequest,
                  searchResEntry        SearchResultEntry,
                  searchResDone         SearchResultDone,
                  searchResRef          SearchResultReference,
                  modifyRequest         ModifyRequest,
                  modifyResponse        ModifyResponse,
                  addRequest            AddRequest,
                  addResponse           AddResponse,
                  delRequest            DelRequest,
                  delResponse           DelResponse,
                  modDNRequest          ModifyDNRequest,
                  modDNResponse         ModifyDNResponse,
                  compareRequest        CompareRequest,
                  compareResponse       CompareResponse,
                  abandonRequest        AbandonRequest,
                  extendedReq           ExtendedRequest,
                  extendedResp          ExtendedResponse,
                  ...,
                  intermediateResponse  IntermediateResponse },
             controls       [0] Controls OPTIONAL }

        MessageID ::= INTEGER (0 .. maxInt)

        maxInt INTEGER ::= 2147483647 -- (2^^31 - 1) --

        LDAPString ::= OCTET STRING -- UTF-8 encoded,
                                    -- [ISO10646] characters

        LDAPOID ::= OCTET STRING -- Constrained to <numericoid> [Models]

        LDAPDN ::= LDAPString -- Constrained to <distinguishedName>
                              -- [LDAPDN]


Sermersheim      Internet-Draft - Expires April 2006             Page 51 
              Lightweight Directory Access Protocol Version 3

        RelativeLDAPDN ::= LDAPString -- Constrained to <name-component>
                                      -- [LDAPDN]

        AttributeDescription ::= LDAPString
                                -- Constrained to <attributedescription>
                                -- [Models]

        AttributeValue ::= OCTET STRING

        AttributeValueAssertion ::= SEQUENCE {
             attributeDesc   AttributeDescription,
             assertionValue  AssertionValue }

        AssertionValue ::= OCTET STRING

        PartialAttribute ::= SEQUENCE {
             type       AttributeDescription,
             vals       SET OF value AttributeValue }

        Attribute ::= PartialAttribute(WITH COMPONENTS {
             ...,
             vals (SIZE(1..MAX))})

        MatchingRuleId ::= LDAPString































Sermersheim      Internet-Draft - Expires April 2006             Page 52 
              Lightweight Directory Access Protocol Version 3

        LDAPResult ::= SEQUENCE {
             resultCode         ENUMERATED {
                  success                      (0),
                  operationsError              (1),
                  protocolError                (2),
                  timeLimitExceeded            (3),
                  sizeLimitExceeded            (4),
                  compareFalse                 (5),
                  compareTrue                  (6),
                  authMethodNotSupported       (7),
                  strongerAuthRequired         (8),
                       -- 9 reserved --
                  referral                     (10),
                  adminLimitExceeded           (11),
                  unavailableCriticalExtension (12),
                  confidentialityRequired      (13),
                  saslBindInProgress           (14),
                  noSuchAttribute              (16),
                  undefinedAttributeType       (17),
                  inappropriateMatching        (18),
                  constraintViolation          (19),
                  attributeOrValueExists       (20),
                  invalidAttributeSyntax       (21),
                       -- 22-31 unused --
                  noSuchObject                 (32),
                  aliasProblem                 (33),
                  invalidDNSyntax              (34),
                       -- 35 reserved for undefined isLeaf --
                  aliasDereferencingProblem    (36),
                       -- 37-47 unused --
                  inappropriateAuthentication  (48),
                  invalidCredentials           (49),
                  insufficientAccessRights     (50),
                  busy                         (51),
                  unavailable                  (52),
                  unwillingToPerform           (53),
                  loopDetect                   (54),
                       -- 55-63 unused --
                  namingViolation              (64),
                  objectClassViolation         (65),
                  notAllowedOnNonLeaf          (66),
                  notAllowedOnRDN              (67),
                  entryAlreadyExists           (68),
                  objectClassModsProhibited    (69),
                       -- 70 reserved for CLDAP --
                  affectsMultipleDSAs          (71),
                       -- 72-79 unused --
                  other                        (80),
                  ... },
             matchedDN          LDAPDN,
             diagnosticMessage  LDAPString,
             referral           [3] Referral OPTIONAL }

        Referral ::= SEQUENCE SIZE (1..MAX) OF uri URI

Sermersheim      Internet-Draft - Expires April 2006             Page 53 
              Lightweight Directory Access Protocol Version 3


        URI ::= LDAPString     -- limited to characters permitted in
                               -- URIs

        Controls ::= SEQUENCE OF control Control

        Control ::= SEQUENCE {
             controlType             LDAPOID,
             criticality             BOOLEAN DEFAULT FALSE,
             controlValue            OCTET STRING OPTIONAL }

        BindRequest ::= [APPLICATION 0] SEQUENCE {
             version                 INTEGER (1 .. 127),
             name                    LDAPDN,
             authentication          AuthenticationChoice }

        AuthenticationChoice ::= CHOICE {
             simple                  [0] OCTET STRING,
                                     -- 1 and 2 reserved
             sasl                    [3] SaslCredentials,
             ... }

        SaslCredentials ::= SEQUENCE {
             mechanism               LDAPString,
             credentials             OCTET STRING OPTIONAL }

        BindResponse ::= [APPLICATION 1] SEQUENCE {
             COMPONENTS OF LDAPResult,
             serverSaslCreds    [7] OCTET STRING OPTIONAL }

        UnbindRequest ::= [APPLICATION 2] NULL

        SearchRequest ::= [APPLICATION 3] SEQUENCE {
             baseObject      LDAPDN,
             scope           ENUMERATED {
                  baseObject              (0),
                  singleLevel             (1),
                  wholeSubtree            (2),
                  ... },
             derefAliases    ENUMERATED {
                  neverDerefAliases       (0),
                  derefInSearching        (1),
                  derefFindingBaseObj     (2),
                  derefAlways             (3) },
             sizeLimit       INTEGER (0 .. maxInt),
             timeLimit       INTEGER (0 .. maxInt),
             typesOnly       BOOLEAN,
             filter          Filter,
             attributes      AttributeSelection }

        AttributeSelection ::= SEQUENCE OF selector LDAPString
                       -- The LDAPString is constrained to
                       -- <attributeSelector> in Section 4.5.1.7


Sermersheim      Internet-Draft - Expires April 2006             Page 54 
              Lightweight Directory Access Protocol Version 3

        Filter ::= CHOICE {
             and             [0] SET SIZE (1..MAX) OF filter Filter,
             or              [1] SET SIZE (1..MAX) OF filter Filter,
             not             [2] Filter,
             equalityMatch   [3] AttributeValueAssertion,
             substrings      [4] SubstringFilter,
             greaterOrEqual  [5] AttributeValueAssertion,
             lessOrEqual     [6] AttributeValueAssertion,
             present         [7] AttributeDescription,
             approxMatch     [8] AttributeValueAssertion,
             extensibleMatch [9] MatchingRuleAssertion,
             ... }

        SubstringFilter ::= SEQUENCE {
             type           AttributeDescription,
             substrings     SEQUENCE SIZE (1..MAX) OF substring CHOICE {
                  initial [0] AssertionValue,  -- can occur at most once
                  any     [1] AssertionValue,
                  final   [2] AssertionValue } -- can occur at most once
             }

        MatchingRuleAssertion ::= SEQUENCE {
             matchingRule    [1] MatchingRuleId OPTIONAL,
             type            [2] AttributeDescription OPTIONAL,
             matchValue      [3] AssertionValue,
             dnAttributes    [4] BOOLEAN DEFAULT FALSE }

        SearchResultEntry ::= [APPLICATION 4] SEQUENCE {
             objectName      LDAPDN,
             attributes      PartialAttributeList }

        PartialAttributeList ::= SEQUENCE OF
                             partialAttribute PartialAttribute

        SearchResultReference ::= [APPLICATION 19] SEQUENCE
                                  SIZE (1..MAX) OF uri URI

        SearchResultDone ::= [APPLICATION 5] LDAPResult

        ModifyRequest ::= [APPLICATION 6] SEQUENCE {
             object          LDAPDN,
             changes         SEQUENCE OF change SEQUENCE {
                  operation       ENUMERATED {
                       add     (0),
                       delete  (1),
                       replace (2),
                       ... },
                  modification    PartialAttribute } }

        ModifyResponse ::= [APPLICATION 7] LDAPResult

        AddRequest ::= [APPLICATION 8] SEQUENCE {
             entry           LDAPDN,
             attributes      AttributeList }

Sermersheim      Internet-Draft - Expires April 2006             Page 55 
              Lightweight Directory Access Protocol Version 3


        AttributeList ::= SEQUENCE OF attribute Attribute

        AddResponse ::= [APPLICATION 9] LDAPResult

        DelRequest ::= [APPLICATION 10] LDAPDN

        DelResponse ::= [APPLICATION 11] LDAPResult

        ModifyDNRequest ::= [APPLICATION 12] SEQUENCE {
             entry           LDAPDN,
             newrdn          RelativeLDAPDN,
             deleteoldrdn    BOOLEAN,
             newSuperior     [0] LDAPDN OPTIONAL }

        ModifyDNResponse ::= [APPLICATION 13] LDAPResult

        CompareRequest ::= [APPLICATION 14] SEQUENCE {
             entry           LDAPDN,
             ava             AttributeValueAssertion }

        CompareResponse ::= [APPLICATION 15] LDAPResult

        AbandonRequest ::= [APPLICATION 16] MessageID

        ExtendedRequest ::= [APPLICATION 23] SEQUENCE {
             requestName      [0] LDAPOID,
             requestValue     [1] OCTET STRING OPTIONAL }

        ExtendedResponse ::= [APPLICATION 24] SEQUENCE {
             COMPONENTS OF LDAPResult,
             responseName     [10] LDAPOID OPTIONAL,
             responseValue    [11] OCTET STRING OPTIONAL }

        IntermediateResponse ::= [APPLICATION 25] SEQUENCE {
             responseName     [0] LDAPOID OPTIONAL,
             responseValue    [1] OCTET STRING OPTIONAL }

        END
















Sermersheim      Internet-Draft - Expires April 2006             Page 56 
              Lightweight Directory Access Protocol Version 3

Appendix C. Changes

   This appendix is non-normative.

   This appendix summarizes substantive changes made to RFC 2251, RFC
   2830, and RFC 3771.


C.1. Changes made to RFC 2251:

   This section summarizes the substantive changes made to Sections 1,
   2, 3.1, and 4 through the remainder of RFC 2251. Readers should
   consult [Models] and [AuthMeth] for summaries of changes to other
   sections.


C.1.1. Section 1 (Status of this Memo)

   - Removed IESG note. Post publication of RFC 2251, mandatory LDAP
     authentication mechanisms have been standardized which are
     sufficient to remove this note. See [AuthMeth] for authentication
     mechanisms.


C.1.2. Section 3.1 (Protocol Model) and others

   - Removed notes giving history between LDAP v1, v2 and v3. Instead,
     added sufficient language so that this document can stand on its
     own.


C.1.3. Section 4 (Elements of Protocol)

   - Clarified where the extensibility features of ASN.1 apply to the
     protocol. This change affected various ASN.1 types by the
     inclusion of ellipses (...) to certain elements.
   - Removed the requirement that servers which implement version 3 or
     later MUST provide the 'supportedLDAPVersion' attribute. This
     statement provided no interoperability advantages.


C.1.4. Section 4.1.1 (Message Envelope)

   - There was a mandatory requirement for the server to return a
     Notice of Disconnection and drop the transport connection when a
     PDU is malformed in a certain way. This has been updated such that
     the server SHOULD return the Notice of Disconnection, and MUST
     terminate the LDAP Session.


C.1.5. Section 4.1.1.1 (Message ID)

   - Required that the messageID of requests MUST be non-zero as the
     zero is reserved for Notice of Disconnection.

Sermersheim      Internet-Draft - Expires April 2006             Page 57 
              Lightweight Directory Access Protocol Version 3

   - Specified when it is and isn't appropriate to return an already
     used message id. RFC 2251 accidentally imposed synchronous server
     behavior in its wording of this.


C.1.6. Section 4.1.2 (String Types)

   - Stated that LDAPOID is constrained to <numericoid> from [Models].


C.1.7. Section 4.1.5.1 (Binary Option) and others

   - Removed the Binary Option from the specification. There are
     numerous interoperability problems associated with this method of
     alternate attribute type encoding. Work to specify a suitable
     replacement is ongoing.


C.1.8. Section 4.1.8 (Attribute)

   - Combined the definitions of PartialAttribute and Attribute here,
     and defined Attribute in terms of PartialAttribute.


C.1.9. Section 4.1.10 (Result Message)

   - Renamed "errorMessage" to "diagnosticMessage" as it is allowed to
     be sent for non-error results.
   - Moved some language into Appendix A, and refer the reader there.
   - Allowed matchedDN to be present for other result codes than those
     listed in RFC 2251.
   - renamed the code "strongAuthRequired" to "strongerAuthRequired" to
     clarify that this code may often be returned to indicate that a
     stronger authentication is needed to perform a given operation.


C.1.10. Section 4.1.11 (Referral)

   - Defined referrals in terms of URIs rather than URLs.
   - Removed the requirement that all referral URIs MUST be equally
     capable of progressing the operation. The statement was ambiguous
     and provided no instructions on how to carry it out.
   - Added the requirement that clients MUST NOT loop between servers.
   - Clarified the instructions for using LDAPURLs in referrals, and in
     doing so added a recommendation that the scope part be present.
   - Removed imperatives which required clients to use URLs in specific
     ways to progress an operation. These did nothing for
     interoperability.


C.1.11. Section 4.1.12 (Controls)

   - Specified how control values defined in terms of ASN.1 are to be
     encoded.

Sermersheim      Internet-Draft - Expires April 2006             Page 58 
              Lightweight Directory Access Protocol Version 3

   - Noted that the criticality field is only applied to request
     messages (except UnbindRequest), and must be ignored when present
     on response messages and UnbindRequest.
   - Specified that non-critical controls may be ignored at the
     server's discretion. There was confusion in the original wording
     which led some to believe that recognized controls may not be
     ignored as long as they were associated with a proper request.
   - Added language regarding combinations of controls and the ordering
     of controls on a message.
   - Specified that when the semantics of the combination of controls
     is undefined or unknown, it results in a protocolError.
   - Changed "The server MUST be prepared" to "Implementations MUST be
     prepared" in the eighth paragraph to reflect that both client and
     server implementations must be able to handle this (as both parse
     controls).


C.1.12. Section 4.2 (Bind Operation)

   - Mandated that servers return protocolError when the version is not
     supported.
   - Disambiguated behavior when the simple authentication is used, the
     name is empty and the password is non-empty.
   - Required servers to not dereference aliases for Bind. This was
     added for consistency with other operations and to help ensure
     data consistency.
   - Required that textual passwords be transferred as UTF-8 encoded
     Unicode, and added recommendations on string preparation. This was
     to help ensure interoperability of passwords being sent from
     different clients.


C.1.13. Section 4.2.1 (Sequencing of the Bind Request)

   - This section was largely reorganized for readability and language
     was added to clarify the authentication state of failed and
     abandoned Bind operations.
   - Removed: "If a SASL transfer encryption or integrity mechanism has
     been negotiated, that mechanism does not support the changing of
     credentials from one identity to another, then the client MUST
     instead establish a new connection."
     If there are dependencies between multiple negotiations of a
     particular SASL mechanism, the technical specification for that
     SASL mechanism details how applications are to deal with them.
     LDAP should not require any special handling.
   - Dropped MUST imperative in paragraph 3 to align with [Keywords].
   - Mandated that clients not send non-Bind operations while a Bind is
     in progress, and suggested that servers not process them if they
     are received. This is needed to ensure proper sequencing of the
     Bind in relationship to other operations.





Sermersheim      Internet-Draft - Expires April 2006             Page 59 
              Lightweight Directory Access Protocol Version 3

C.1.14. Section 4.2.3 (Bind Response)

   - Moved most error-related text to Appendix A, and added text
     regarding certain errors used in conjunction with the Bind
     operation.
   - Prohibited the server from specifying serverSaslCreds when not
     appropriate.


C.1.15. Section 4.3 (Unbind Operation)

   - Specified that both peers are to cease transmission and terminate
     the LDAP session for the Unbind operation.


C.1.16. Section 4.4 (Unsolicited Notification)

   - Added instructions for future specifications of Unsolicited
     Notifications.


C.1.17. Section 4.5.1 (Search Request)

   - SearchRequest attributes is now defined as an AttributeSelection
     type rather than AttributeDescriptionList, and an ABNF is
     provided.
   - SearchRequest attributes may contain duplicate attribute
     descriptions. This was previously prohibited. Now servers are
     instructed to ignore subsequent names when they are duplicated.
     This was relaxed in order to allow different short names and also
     OIDs to be requested for an attribute.
   - The present search filter now evaluates to Undefined when the
     specified attribute is not known to the server. It used to
     evaluate to FALSE, which caused behavior inconsistent with what
     most would expect, especially when the not operator was used.
   - The Filter choice SubstringFilter substrings type is now defined
     with a lower bound of 1.
   - The SubstringFilter substrings 'initial, 'any', and 'final' types
     are now AssertionValue rather than LDAPString. Also, added
     imperatives stating that 'initial' (if present) must be listed
     first, and 'final' (if present) must be listed last.
   - Disambiguated the semantics of the derefAliases choices. There was
     question as to whether derefInSearching applied to the base object
     in a wholeSubtree Search.
   - Added instructions for equalityMatch, substrings, greaterOrEqual,
     lessOrEqual, and approxMatch.


C.1.18. Section 4.5.2 (Search Result)

   - Recommended that servers not use attribute short names when it
     knows they are ambiguous or may cause interoperability problems.
   - Removed all mention of ExtendedResponse due to lack of
     implementation.

Sermersheim      Internet-Draft - Expires April 2006             Page 60 
              Lightweight Directory Access Protocol Version 3



C.1.19. Section 4.5.3 (Continuation References in the Search Result)

   - Made changes similar to those made to Section 4.1.11.


C.1.20. Section 4.5.3.1 (Example)

   - Fixed examples to adhere to changes made to Section 4.5.3.


C.1.21. Section 4.6 (Modify Operation)

   - Replaced AttributeTypeAndValues with Attribute as they are
     equivalent.
   - Specified the types of modification changes which might
     temporarily violate schema. Some readers were under the impression
     that any temporary schema violation was allowed.


C.1.22. Section 4.7 (Add Operation)

   - Aligned Add operation with X.511 in that the attributes of the RDN
     are used in conjunction with the listed attributes to create the
     entry. Previously, Add required that the distinguished values be
     present in the listed attributes.
   - Removed requirement that the objectClass attribute MUST be
     specified as some DSE types do not require this attribute.
     Instead, generic wording was added, requiring the added entry to
     adhere to the data model.
   - Removed recommendation regarding placement of objects. This is
     covered in the data model document.


C.1.23. Section 4.9 (Modify DN Operation)

   - Required servers to not dereference aliases for Modify DN. This
     was added for consistency with other operations and to help ensure
     data consistency.
   - Allow Modify DN to fail when moving between naming contexts.
   - Specified what happens when the attributes of the newrdn are not
     present on the entry.


C.1.24. Section 4.10 (Compare Operation)

   - Specified that compareFalse means that the Compare took place and
     the result is false. There was confusion which lead people to
     believe that an Undefined match resulted in compareFalse.
   - Required servers to not dereference aliases for Compare. This was
     added for consistency with other operations and to help ensure
     data consistency.


Sermersheim      Internet-Draft - Expires April 2006             Page 61 
              Lightweight Directory Access Protocol Version 3


C.1.25. Section 4.11 (Abandon Operation)

   - Explained that since Abandon returns no response, clients should
     not use it if they need to know the outcome.
   - Specified that Abandon and Unbind cannot be abandoned.


C.1.26. Section 4.12 (Extended Operation)

   - Specified how values of Extended operations defined in terms of
     ASN.1 are to be encoded.
   - Added instructions on what Extended operation specifications
     consist of.
   - Added a recommendation that servers advertise supported Extended
     operations.


C.1.27. Section 5.2 (Transfer Protocols)

   - Moved referral-specific instructions into referral-related
     sections.


C.1.28. Section 7 (Security Considerations)

   - Reworded notes regarding SASL not protecting certain aspects of
     the LDAP Bind messages.
   - Noted that Servers are encouraged to prevent directory
     modifications by clients that have authenticated anonymously
     [AuthMeth].
   - Added a note regarding the possibility of changes to security
     factors (authentication, authorization, data confidentiality).
   - Warned against following referrals that may have been injected in
     the data stream.
   - Noted that servers should protect information equally, whether in
     an error condition or not, and mentioned specifically; matchedDN,
     diagnosticMessage, and resultCodes.
   - Added a note regarding malformed and long encodings.


C.1.29. Appendix A (Complete ASN.1 Definition)

   - Added "EXTENSIBILITY IMPLIED" to ASN.1 definition.
   - Removed AttributeType. It is not used.


C.2. Changes made to RFC 2830:

   This section summarizes the substantive changes made to Sections of
   RFC 2830. Readers should consult [AuthMeth] for summaries of changes
   to other sections.



Sermersheim      Internet-Draft - Expires April 2006             Page 62 
              Lightweight Directory Access Protocol Version 3

C.2.1. Section 2.3 (Response other than "success")

   - Removed wording indicating that referrals can be returned from
     StartTLS.
   - Removed requirement that only a narrow set of result codes can be
     returned. Some result codes are required in certain scenarios, but
     any other may be returned if appropriate.
   - Removed requirement that the ExtendedResponse.responseName MUST be
     present. There are circumstances where this is impossible, and
     requiring this is at odds with language in Section 4.12.


C.2.1. Section 4 (Closing a TLS Connection)

   - Reworded most of this section to align with definitions of the
     LDAP protocol layers.
   - Removed instructions on abrupt closure as this is covered in other
     areas of the document (specifically, Section 5.3)


C.3. Changes made to RFC 3771:

   - Rewrote to fit into this document. In general, semantics were
     preserved. Supporting and background language seen as redundant
     due to its presence in this document was omitted.
   - Specified that Intermediate responses to a request may be of
     different types, and one of the response types may be specified to
     have no response value.



























Sermersheim      Internet-Draft - Expires April 2006             Page 63 
              Lightweight Directory Access Protocol Version 3




Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights. Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard. Please address the information to the IETF at ietf-
   ipr@ietf.org.

Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.






Sermersheim      Internet-Draft - Expires April 2006             Page 64


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/