[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 RFC 4647

Network Working Group                                   A. Phillips, Ed.
Internet-Draft                                            Quest Software
Expires: December 30, 2005                                 M. Davis, Ed.
                                                                     IBM
                                                           June 28, 2005


           Matching Tags for the Identification of Languages
                      draft-ietf-ltru-matching-03

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on December 30, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This document describes different mechanisms for comparing, matching,
   and evaluating language tags.  Possible algorithms for language
   negotiation and content selection are described.







Phillips & Davis        Expires December 30, 2005               [Page 1]

Internet-Draft                ltru-matching                    June 2005


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Language Range . . . . . . . . . . . . . . . . . . . . . .  4
     2.1   Basic Language Range . . . . . . . . . . . . . . . . . . .  4
       2.1.1   Matching . . . . . . . . . . . . . . . . . . . . . . .  5
       2.1.2   Lookup . . . . . . . . . . . . . . . . . . . . . . . .  6
     2.2   Extended Language Range  . . . . . . . . . . . . . . . . .  6
       2.2.1   Extended Range Matching  . . . . . . . . . . . . . . .  7
       2.2.2   Extended Range Lookup  . . . . . . . . . . . . . . . .  8
       2.2.3   Scored Matching  . . . . . . . . . . . . . . . . . . .  9
     2.3   Meaning of Language Tags and Ranges  . . . . . . . . . . . 10
     2.4   Choosing Between Alternate Matching Schemes  . . . . . . . 11
     2.5   Considerations for Private Use Subtags . . . . . . . . . . 12
     2.6   Length Considerations in Matching  . . . . . . . . . . . . 12
   3.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 14
   4.  Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 16
   6.  Character Set Considerations . . . . . . . . . . . . . . . . . 17
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 18
     7.1   Normative References . . . . . . . . . . . . . . . . . . . 18
     7.2   Informative References . . . . . . . . . . . . . . . . . . 19
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 19
   A.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 21
       Intellectual Property and Copyright Statements . . . . . . . . 22


























Phillips & Davis        Expires December 30, 2005               [Page 2]

Internet-Draft                ltru-matching                    June 2005


1.  Introduction

   Human beings on our planet have, past and present, used a number of
   languages.  There are many reasons why one would want to identify the
   language used when presenting or requesting information.

   Information about a user's language preferences commonly needs to be
   identified so that appropriate processing can be applied.  For
   example, the user's language preferences in a browser can be used to
   select web pages appropriately.  A choice of language preference can
   also be used to select among tools (such as dictionaries) to assist
   in the processing or understanding of content in different languages.

   Given a set of language identifiers, such as those defined in
   [ID.ietf-ltru-registry], various mechanisms can be envisioned for
   performing language negotiation and tag matching.  The suitability of
   a particular mechanism to a particular application depends on the
   needs of that application.

   This document defines language ranges and syntax for specifying user
   preferences in a request for language content.  It also specifies
   various schemes and mechanisms that can be used with language ranges
   when matching or filtering content based on language tags.

   The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].
























Phillips & Davis        Expires December 30, 2005               [Page 3]

Internet-Draft                ltru-matching                    June 2005


2.  The Language Range

   Language Tags are used to identify the language of some information
   item or content.  Applications that use language tags are often faced
   with the problem of identifying sets of content that share certain
   language attributes.  For example, HTTP 1.1 [RFC2616] describes
   language ranges in its discussion of the Accept-Language header
   (Section 14.4), which is used for selecting content from servers
   based on the language of that content.

   When selecting content according to its language, it is useful to
   have a mechanism for identifying sets of language tags that share
   specific attributes.  This allows users to select or filter content
   based on specific requirements.  Such an identifier is called a
   "Language Range".

2.1  Basic Language Range

   A basic language range (such as described in [RFC3066] and HTTP 1.1
   [RFC2616]) is a set of languages whose tags all begin with the same
   sequence of subtags.  A basic language range can be represented by a
   'language-range' tag, by using the definition from HTTP/1.1 [RFC2616]
   :
   language-range = language-tag / "*"

   That is, a language-range has the same syntax as a language-tag or is
   the single character "*".  This definition of language-range implies
   that there is a semantic relationship between tags that share the
   same prefix.

   In particular, the set of language tags that match a specific
   language-range might not all be mutually intelligible.  The use of a
   prefix when matching tags to language ranges does not imply that
   language tags are assigned to languages in such a way that it is
   always true that if a user understands a language with a certain tag,
   then this user will also understand all languages with tags for which
   this tag is a prefix.  The prefix rule simply allows the use of
   prefix tags if this is the case.

   When working with tags and ranges you SHOULD also note the following:

   1.  Private-use and Extension subtags are normally orthogonal to
       language tag fallback.  Implementations SHOULD ignore
       unrecognized private-use and extension subtags when performing
       language tag fallback.  Since these subtags are always at the end
       of the sequence of subtags, they don't normally interfere with
       the use of prefixes for matching in the schemes described below.




Phillips & Davis        Expires December 30, 2005               [Page 4]

Internet-Draft                ltru-matching                    June 2005


   2.  Implementations that choose not to interpret one or more private-
       use or extension subtags SHOULD NOT remove or modify these
       extensions in content that they are processing.  When a language
       tag instance is to be used in a specific, known protocol, and is
       not being passed through to other protocols, language tags MAY be
       filtered to remove subtags and extensions that are not supported
       by that protocol.  Such filtering SHOULD be avoided, if possible,
       since it removes information that might be relevant if services
       on the other end of the protocol would make use of that
       information.

   3.  Some applications of language tags might want or need to consider
       extensions and private-use subtags when matching tags.  If
       extensions and private-use subtags are included in a matching or
       filtering process that utilizes the one of the schemes described
       in this document, then the implementation SHOULD canonicalize the
       language tags and/or ranges before performing the matching.  Note
       that language tag processors that claim to be "well-formed"
       processors as defined in [ID.ietf-ltru-registry] generally fall
       into this category.

   There are two matching schemes  that are commonly associated with
   basic language ranges:  matching and  lookup.

2.1.1  Matching

   Language tag matching is used to select all content that matches a
   given prefix.  In matching, the language range represents the least
   specific tag which is an acceptable match and every piece of content
   that matches is returned.

   For example, if an application is applying a style to all content in
   a web page in a particular language, it might use language tag
   matching to select the content to which the style is applied.

   A language-range matches a language-tag if it exactly equals the tag,
   or if it exactly equals a prefix of the tag such that the first
   character following the prefix is "-".  (That is, the language-range
   "de-de" matches the language tag "de-DE-1996", but not the language
   tag "de-Deva".)

   The special range "*" matches any tag.  A protocol which uses
   language ranges MAY specify additional rules about the semantics of
   "*"; for instance, HTTP/1.1 specifies that the range "*" matches only
   languages not matched by any other range within an "Accept-Language:"
   header.





Phillips & Davis        Expires December 30, 2005               [Page 5]

Internet-Draft                ltru-matching                    June 2005


2.1.2  Lookup

   Content lookup is used to select the single information item that
   best matches the language range for a given request.  In lookup, the
   language range represents the most specific tag which is an
   acceptable match and only the closest matching item is returned.

   For example, if an application inserts some dynamic content into a
   web page, returning an empty string if there is no exact match is not
   an option.  Instead, the application "falls back".

   When performing lookup, the language range is progressively truncated
   from the end until a matching piece of content is located.  For
   example, starting with the range "zh-Hant-CN-x-wadegile", the lookup
   would progressively search for content as shown below:

   Range to match: zh-Hant-CN-x-wadegile
   1. zh-Hant-CN-x-wadegile
   2. zh-Hant-CN
   3. zh-Hant
   4. zh
   5. (default content or the empty tag)

                Figure 2: Default Fallback Pattern Example

   This scheme allows some flexibility in finding content.  It also
   typically provides better results when data is not available at a
   specific level of tag granularity or is sparsely populated (than if
   the default language for the system or content were used).

2.2  Extended Language Range

   Prefix matching using a Basic Language Range, as described above, is
   not always the most appropriate way to access the information
   contained in language tags when selecting or filtering content.  Some
   applications might wish to define a more granular matching scheme and
   such a matching scheme requires the ability to specify the various
   attributes of a language tag in the language range.  An extended
   language range can be represented by the following ABNF:












Phillips & Davis        Expires December 30, 2005               [Page 6]

Internet-Draft                ltru-matching                    June 2005


   extended-language-range = grandfathered / privateuse / range
   range   = ( lang [ "-" script ] [ "-" region ] *( "-" variant )
                [ "-" privateuse ] )
   lang    = 2*8ALPHA / extlang / "*"
   extlang = 2*3ALPHA *2("-" 3ALPHA) ( "-" ( 3ALPHA / "*" ) )
   script  = 4ALPHA / "*"
   region  = 2ALPHA / 3DIGIT / "*"
   variant = 5*8alphanum / ( DIGIT 3alphanum ) / "*"
   privateuse    = ( "x" / "X" ) 1*( "-" ( 1*8alphanum ) )
   grandfathered = 1*3ALPHA 1*2( "-" ( 2*8alphanum ) )
   alphanum      = ( ALPHA / DIGIT )

   In an extended language range, the identifier takes the form of a
   series of subtags which must consist of well-formed subtags or the
   special subtag "*".  For example, the language range "en-*-US"
   specifies a primary language of 'en', followed by any script subtag,
   followed by the region subtag 'US'.

   A field not present in the middle of an extended language range MAY
   be treated as if the field contained a "*".  For example, the range
   "en-US" MAY be considered to be equivalent to the range "en-*-US".

   There are several matching algorithms or schemes which can be applied
   when matching extended language ranges to language tags.

2.2.1  Extended Range Matching

   In extended range matching, the subtags in a language tag are
   compared to the corresponding subtags in the extended language range.
   A subtag is considered to match if it exactly matches the
   corresponding subtag in the range or the range contains a subtag with
   the value "*" (which matches all subtags, including the empty
   subtag).  Extended Range Matching is an extension of basic matching
   (Section 2.1.1): the language range represents the least specific tag
   which is an acceptable match.

   By default all extensions and their subtags are ignored for extended
   language range matching.

   Private use subtags MAY be specified in the language range and MUST
   NOT be ignored when matching.

   Subtags not specified, including those at the end of the language
   range, are assigned the value "*".  This makes each range into a
   prefix much like that used in basic language range matching.  For
   example, the extended language range "zh-*-CN" matches all of the
   following tags because the unspecified variant field is expanded to
   "*":



Phillips & Davis        Expires December 30, 2005               [Page 7]

Internet-Draft                ltru-matching                    June 2005


      zh-Hant-CN

      zh-CN

      zh-Hans-CN

      zh-CN-x-wadegile

      zh-Latn-CN-boont


2.2.2  Extended Range Lookup

   In extended range lookup, the subtags in a language tag are compared
   to the corresponding subtags in the extended language range.  The
   subtag is considered to match if it exactly matches the corresponding
   subtag in the range or the range contains a subtag with the value "*"
   (which matches all subtags, including the empty subtag).  Extended
   language range lookup is an extension of basic lookup
   (Section 2.1.2): the language range represents the most specific tag
   which will form an acceptable match.

   Subtags not specified are assigned the value "*" prior to performing
   tag matching.  Unlike in extended range matching, however, fields at
   the end of the range MUST NOT be expanded in this manner.  For
   example, "en-US" MUST NOT be considered to be the same as the range
   "en-US-*".  This allows ranges to be specific.  The "*" wildcard MUST
   be used at the end of the range to indicate that all tags with the
   range as a prefix are allowable matches.  That is, the range "zh-*"
   matches the tags "zh-Hant" and "zh-Hant-CN", while the range "zh"
   matches neither of those tags.

   The wildcard "*" at the end of a range SHOULD be considered to match
   any private use subtag sequences (making extended language range
   lookup function exactly like extended range matching Section 2.2.1).

   By default all extensions and their subtags SHOULD be ignored for
   extended language range lookup.  Private use subtags MAY be specified
   in the language range and MUST NOT be ignored when performing lookup.
   The wildcard "*" at the end of a range SHOULD be considered to match
   any private use subtag sequences in addition to variants.

   For example, the range "*-US" matches all of the following tags:

      en-US

      en-Latn-US




Phillips & Davis        Expires December 30, 2005               [Page 8]

Internet-Draft                ltru-matching                    June 2005


      en-US-r-extends (extensions are ignored)

      fr-US

   For example, the range "en-*-US" matches _none_ of the following
   tags:

      fr-US

      en (missing region US)

      en-Latn (missing region US)

      en-Latn-US-scouse (variant field is present)

   For example, the range "en-*" matches all of the following tags:

      en-Latn

      en-Latn-US

      en-Latn-US-scouse

      en-US

      en-scouse

   Note that the ability to be specific in extended range lookup can
   make this matching scheme a more appropriate replacement for basic
   matching than the extended range matching scheme.

2.2.3  Scored Matching

   In the "scored matching" scheme, the extended language range and the
   language tags are pre-normalized by mapping grandfathered and
   obsolete tags into modern equivalents.

   The language range and the language tags are normalized into
   quadruples of the form (language, script, country, variant), where
   extended language is considered part of language and x-private-codes
   are considered part of the language if they are initial and part of
   the variant if not initial.  Missing components are set to "*".  An
   "*" pattern becomes the quadruple ("*", "*", "*", "*").

   Each language tag  being matched or filtered is assigned a "quality
   value" such that higher values indicate better matches and lower
   values indicate worse ones.  If the language matches, add 8 to the
   quality value.  If the script matches, add 4 to the quality value.



Phillips & Davis        Expires December 30, 2005               [Page 9]

Internet-Draft                ltru-matching                    June 2005


   If the region matches, add 2 to the quality value.  If the variant
   matches, add 1 to the quality value.  Elements of the quadruples are
   considered to match if they are the same or if one of them is "*".

   A value of 15 is a perfect match; 0 is no match at all.  Different
   values could be more or less appropriate for different applications
   and implementations SHOULD probably allow users to choose the most
   appropriate selection value.

2.3  Meaning of Language Tags and Ranges

   A language tag defines a language as spoken (or written, signed or
   otherwise signaled) by human beings for communication of information
   to other human beings.

   If a language tag B contains language tag A as a prefix, then B is
   typically "narrower" or "more specific" than A. For example, "zh-
   Hant-TW" is more specific than "zh-Hant".

   This relationship is not guaranteed in all cases: specifically,
   languages that begin with the same sequence of subtags are NOT
   guaranteed to be mutually intelligible, although they might be.

   For example, the tag "az" shares a prefix with both "az-Latn"
   (Azerbaijani written using the Latin script) and "az-Cyrl"
   (Azerbaijani written using the Cyrillic script).  A person fluent in
   one script might not be able to read the other, even though the text
   might be otherwise identical.  Content tagged as "az" most probably
   is written in just one script and thus might not be intelligible to a
   reader familiar with the other script.

   Variant subtags in particular seem to represent specific divisions in
   mutual understanding, since they often encode dialects or other
   idiosyncratic variations within a language.

   The relationship between the language tag and the information it
   relates to is defined by the standard describing the context in which
   it appears.  Accordingly, this section can only give possible
   examples of its usage.

   o  For a single information object, the associated language tags
      might be interpreted as the set of languages that are necessary
      for a complete comprehension of the complete object.  Example:
      Plain text documents.

   o  For an aggregation of information objects, the associated language
      tags could be taken as the set of languages used inside components
      of that aggregation.  Examples: Document stores and libraries.



Phillips & Davis        Expires December 30, 2005              [Page 10]

Internet-Draft                ltru-matching                    June 2005


   o  For information objects whose purpose is to provide alternatives,
      the associated language tags could be regarded as a hint that the
      content is provided in several languages, and that one has to
      inspect each of the alternatives in order to find its language or
      languages.  In this case, the presence of multiple tags might not
      mean that one needs to be multi-lingual to get complete
      understanding of the document.  Example: MIME multipart/
      alternative.

   o  In markup languages, such as HTML and XML, language information
      can be added to each part of the document identified by the markup
      structure (including the whole document itself).  For example, one
      could write <span lang="FR">C'est la vie.</span> inside a
      Norwegian document; the Norwegian-speaking user could then access
      a French-Norwegian dictionary to find out what the marked section
      meant.  If the user were listening to that document through a
      speech synthesis interface, this formation could be used to signal
      the synthesizer to appropriately apply French text-to-speech
      pronunciation rules to that span of text, instead of misapplying
      the Norwegian rules.


2.4  Choosing Between Alternate Matching Schemes

   Implementations MAY choose to implement different styles of matching
   for different kinds of processing.  For example, an implementation
   could treat an absent script subtag as a "wildcard" field; thus
   "az-AZ" would match "az-AZ", "az-Cyrl-AZ", "az-Latn-AZ", etc. but not
   "az" (this is extended range lookup).  If one item is to be chosen,
   the implementation could pick among those matches based on other
   information, such as the most likely script used in the language/
   region in question or the script used by other content selected.

   Because the primary language subtag cannot be absent in a language
   tag, the 'UND' subtag is sometimes be used as a 'wildcard' in basic
   matching.  For example, in a query where you want to select all
   language tags that contain 'Latn' as the script code and 'AZ' as the
   region code, you could use the range "und-Latn-AZ".  This requires an
   implementation to examine the actual values of the subtags, though.
   The matching schemes described elsewhere in this document are
   designed such that  implementations do not have to examine the values
   or subtags supplied and, except for scored matching, they do not need
   access to the Language Subtag Registry nor the use of valid subtags
   in language tags or ranges.  This has great benefit for speed and
   simplicity of implementation.

   Implementations might also wish to use semantic information external
   to the langauge tags when performing fallback.  For example, the



Phillips & Davis        Expires December 30, 2005              [Page 11]

Internet-Draft                ltru-matching                    June 2005


   primary language subtags 'nn' (Nynorsk Norwegian) and 'nb' (Bokmal
   Norwegian) might both be usefully matched to the more general subtag
   'no' (Norwegian).  Or an application might infer that content labeled
   "zh-CN" is morely likely to match the range "zh-Hans" than equivalent
   content labeled "zh-TW".

2.5  Considerations for Private Use Subtags

   Private-use subtags require private agreement between the parties
   that intend to use or exchange language tags that use them and great
   caution SHOULD be used in employing them in content or protocols
   intended for general use.  Private-use subtags are simply useless for
   information exchange without prior arrangement.

   The value and semantic meaning of private-use tags and of the subtags
   used within such a language tag are not defined.  Matching private
   use tags using language ranges or extended language ranges can result
   in unpredictable content being returned.

2.6  Length Considerations in Matching

   [RFC3066] did not provide an upper limit on the size of language tags
   or ranges.  RFC 3066 did define the semantics of particular subtags
   in such a way that most language tags or ranges consisted of language
   and region subtags with a combined total length of up to six
   characters.  Larger tags and ranges (in terms of both subtags and
   characters) did exist, however.

   [ID.ietf-ltru-registry] also does not impose a fixed upper limit on
   the number of subtags in a language tag or range (and thus an upper
   bound on the size of either).  The syntax in that document suggests
   that, depending on the specific language or range of languages, more
   subtags (and thus characters) are sometimes necessary as a result.
   Length considerations and their impact on the selection and
   processing of tags are described in Section 2.1.1 of that document.

   A matching implementation MAY choose to limit the length of the
   language tags or ranges used in matching.  Any such limitation SHOULD
   be clearly documented, and such documentation SHOULD include the
   disposition of any longer tags or ranges (for example, whether an
   error value is generated or the language tag or range is truncated).
   If truncation is permitted it MUST NOT permit a subtag to be divided,
   since this changes the semantics of the subtag being matched and can
   result in false positives or negatives.

   Implementations that restrict storage SHOULD consider the impact of
   tag or range truncation on the resulting matches.  For example,
   removing the "*" from the end of an extended language range (see



Phillips & Davis        Expires December 30, 2005              [Page 12]

Internet-Draft                ltru-matching                    June 2005


   Section 2.2) can greatly modify the set of returned matches.  A
   protocol that allows tags or ranges to be truncated at an arbitrary
   limit, without giving any indication of what that limit is, has the
   potential for causing harm by changing the meaning of values in
   substantial ways.

   In practice, most tags do not require additional subtags or
   substantially more characters.  Additional subtags sometimes add
   useful distinguishing information, but extraneous subtags interfere
   with the meaning, understanding, and especially matching of language
   tags.  Since language tags or ranges MAY be truncated by an
   application or protocol that limits storage, when choosing language
   tags or ranges users and applications SHOULD avoid adding subtags
   that add no distinguishing value.  In particular, users and
   implementations SHOULD follow the 'Prefix' and 'Suppress-Script'
   fields in the registry (defined in Section 3.6 of [ID.ietf-ltru-
   registry]): these fields provide guidance on when specific additional
   subtags SHOULD (and SHOULD NOT) be used.

   Implementations MUST support a limit of at least 33 characters.  This
   limit includes at least one subtag of each non-extension, non-private
   use type.  When choosing a buffer limit, a length of at least 42
   characters is strongly RECOMMENDED.

   The practical limit on tags or ranges derived solely from registered
   values is 42 characters.  Implementations MUST be able to handle tags
   and ranges of this length.  Support for tags and ranges of at least
   62 characters in length is RECOMMENDED.  Implementations MAY support
   longer values, including matching extensive sets of private use or
   extension subtags.

   Applications or protocols which have to truncate a tag MUST do so by
   progressively removing subtags along with their preceding "-" from
   the right side of the language tag until the tag is short enough for
   the given buffer.  If the resulting tag ends with a single-character
   subtag, that subtag and its preceding "-" MUST also be removed.  For
   example:

   Tag to truncate: zh-Hant-CN-variant1-a-extend1-x-wadegile-private1
   1. zh-Hant-CN-variant1-a-extend1-x-wadegile
   2. zh-Hant-CN-variant1-a-extend1
   3. zh-Hant-CN-variant1
   4. zh-Hant-CN
   5. zh-Hant
   6. zh

                    Figure 4: Example of Tag Truncation




Phillips & Davis        Expires December 30, 2005              [Page 13]

Internet-Draft                ltru-matching                    June 2005


3.  IANA Considerations

   This document presents no new or existing considerations for IANA.
















































Phillips & Davis        Expires December 30, 2005              [Page 14]

Internet-Draft                ltru-matching                    June 2005


4.  Changes

   This is the first version of this document.

   The following changes were put into this document since draft-02:

      Turned on symrefs and replaced all reference IDs to make them
      readable (F.Ellermann)

      Removed all external references from the abstract (R.Presuhn)









































Phillips & Davis        Expires December 30, 2005              [Page 15]

Internet-Draft                ltru-matching                    June 2005


5.  Security Considerations

   Language ranges used in content negotiation might be used to infer
   the nationality of the sender, and thus identify potential targets
   for surveillance.  In addition, unique or highly unusual language
   ranges or combinations of language ranges might be used to track
   specific individual's activities.

   This is a special case of the general problem that anything you send
   is visible to the receiving party.  It is useful to be aware that
   such concerns can exist in some cases.

   The evaluation of the exact magnitude of the threat, and any possible
   countermeasures, is left to each application protocol.





































Phillips & Davis        Expires December 30, 2005              [Page 16]

Internet-Draft                ltru-matching                    June 2005


6.  Character Set Considerations

   The syntax of language tags and language ranges permit only the
   characters A-Z, a-z, 0-9, and HYPHEN-MINUS (%x2D).  These characters
   are present in most character sets, so presentation of language tags
   should not present any character set issues.













































Phillips & Davis        Expires December 30, 2005              [Page 17]

Internet-Draft                ltru-matching                    June 2005


7.  References

7.1  Normative References

   [ID.ietf-ltru-registry]
              Phillips, A., Ed. and M. Davis, Ed., "Tags for the
              Identification of Languages (Internet-Draft)", June 2005,
              <http://www.ietf.org/internet-drafts/
              draft-ietf-ltru-registry-07.txt>.

   [RFC1327]  Hardcastle-Kille, S., "Mapping between X.400(1988) / ISO
              10021 and RFC 822", RFC 1327, May 1992.

   [RFC1521]  Borenstein, N. and N. Freed, "MIME (Multipurpose Internet
              Mail Extensions) Part One: Mechanisms for Specifying and
              Describing the Format of Internet Message Bodies",
              RFC 1521, September 1993.

   [RFC2028]  Hovey, R. and S. Bradner, "The Organizations Involved in
              the IETF Standards Process", BCP 11, RFC 2028,
              October 1996.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2231]  Freed, N. and K. Moore, "MIME Parameter Value and Encoded
              Word Extensions: Character Sets, Languages, and
              Continuations", RFC 2231, November 1997.

   [RFC2234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", RFC 2234, November 1997.

   [RFC2396]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifiers (URI): Generic Syntax", RFC 2396,
              August 1998.

   [RFC2434]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 2434,
              October 1998.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC2860]  Carpenter, B., Baker, F., and M. Roberts, "Memorandum of
              Understanding Concerning the Technical Work of the
              Internet Assigned Numbers Authority", RFC 2860, June 2000.




Phillips & Davis        Expires December 30, 2005              [Page 18]

Internet-Draft                ltru-matching                    June 2005


   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

7.2  Informative References

   [ISO639-1]
              International Organization for Standardization, "ISO 639-
              1:2002, Codes for the representation of names of languages
              -- Part 1: Alpha-2 code", ISO Standard 639, 2002.

   [ISO639-2]
              International Organization for Standardization, "ISO 639-
              2:1998 - Codes for the representation of names of
              languages -- Part 2: Alpha-3 code - edition 1",
              August 1988.

   [ISO15924]
              ISO TC46/WG3, "ISO 15924:2003 (E/F) - Codes for the
              representation of names of scripts", January 2004.

   [ISO3166]  International Organization for Standardization, "Codes for
              the representation of names of countries, 3rd edition",
              ISO Standard 3166, August 1988.

   [UN_M49]   Statistical Division, United Nations, "Standard Country or
              Area Codes for Statistical Use", UN Standard Country or
              Area Codes for Statistical Use, Revision 4 (United Nations
              publication, Sales No. 98.XVII.9, June 1999.

   [RFC1766]  Alvestrand, H., "Tags for the Identification of
              Languages", RFC 1766, March 1995.

   [RFC3066]  Alvestrand, H., "Tags for the Identification of
              Languages", BCP 47, RFC 3066, January 2001.

   [RFC3339]  Klyne, G. and C. Newman, "Date and Time on the Internet:
              Timestamps", RFC 3339, July 2002.


Authors' Addresses

   Addison Phillips (editor)
   Quest Software

   Email: addison dot phillips at quest dot com






Phillips & Davis        Expires December 30, 2005              [Page 19]

Internet-Draft                ltru-matching                    June 2005


   Mark Davis (editor)
   IBM

   Email: mark dot davis at ibm dot com















































Phillips & Davis        Expires December 30, 2005              [Page 20]

Internet-Draft                ltru-matching                    June 2005


Appendix A.  Acknowledgements

   Any list of contributors is bound to be incomplete; please regard the
   following as only a selection from the group of people who have
   contributed to make this document what it is today.

   The contributors to [ID.ietf-ltru-registry], [RFC3066] and [RFC1766],
   each of which is a  precursor to this document, made enormous
   contributions directly or indirectly to this document and are
   generally responsible for the success of language tags.

   The following people (in alphabetical order by family name)
   contributed to this document:

   Jeremy Carroll, John Cowan, Frank Ellermann, Doug Ewell, Ira
   McDonald, M. Patton, Randy Presuhn and many, many others.

   Very special thanks must go to Harald Tveit Alvestrand, who
   originated RFCs 1766 and 3066, and without whom this document would
   not have been possible.

   For this particular document, John Cowan originated the scheme
   described in Section 2.2.3.  Mark Davis originated the scheme
   described in the Section 2.1.2.



























Phillips & Davis        Expires December 30, 2005              [Page 21]

Internet-Draft                ltru-matching                    June 2005


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Phillips & Davis        Expires December 30, 2005              [Page 22]


Html markup produced by rfcmarkup 1.109, available from https://tools.ietf.org/tools/rfcmarkup/