[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-nadeau-mpls-lc-if-mib) 00 01 02 03 04 05 06 07 08 RFC 4368

Network Working Group                                  Thomas D. Nadeau
Internet Draft                                        Subrahmanya Hegde
Expires: December 2002                              Cisco Systems, Inc.


                                                              June 2002

      Multiprotocol Label Switching (MPLS) Label-Controlled ATM
            and Frame-Relay Management Interface Definition

                   draft-ietf-mpls-lc-if-mib-00.txt

Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC 2026 [RFC2026].

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other
   documents at any time.  It is inappropriate to use Internet-
   Drafts as reference material or to cite them other than as "work
   in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


Table of Contents

  1. Abstract ..................................................  2
  2. Introduction ..............................................  3
  3. Terminology ...............................................  3
  4. The SNMP Management Framework .............................  3
  5. Feature Checklist .........................................  4
  6. Outline ...................................................  5
   6.1. Summary of LSR MIB .....................................  6
  7. Brief Description of MIB Objects ..........................  6
   7.1. mplsInterfaceConfTable .................................  7
   7.2. mplsInterfacePerfTable .................................  7
   7.3. mplsInSegmentTable .....................................  7
   7.4. mplsInSegmentPerfTable .................................  7
   7.5. mplsOutSegmentTable ....................................  8
   7.6. mplsOutSegmentPerfTable ................................  8
   7.7. mplsXCTable ............................................  8
   7.8. mplsLabelStackTable ....................................  8
   7.9. mplsTrafficParamTable ..................................  9



Nadeau et al.              Expires December 2002             [Page 1]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



  8. Example of LSP Setup ......................................  9
  9. Application of the Interface Group to MPLS ................ 11
   9.1. Support of the MPLS Layer by ifTable ................... 11
  10. The Use of RowPointer .................................... 13
  11. MPLS Label Switch Router MIB Definitions ................. 13
  12. Security Considerations .................................. 51
  13. Acknowledgments .......................................... 52
  14. References ............................................... 52
  15. Authors' Addresses ....................................... 54
  16. Full Copyright Statement ................................. 55



1. Abstract

   This memo defines how label switching controlled Frame-Relay
   and ATM interfaces can be realized given the interface stacking
   as defined in the MPLS-LSR and MPLS-TE MIBs.

2. Introduction

   This memo defines how label switching controlled Frame-Relay
   [RFC3034] and ATM [RFC3035] interfaces can be realized given
   the interface stacking as defined in the MPLS-LSR [LSRMIB]
   and MPLS-TE [TEMIB] MIBs.  This document also contains a
   MIB module that extends the MPLS-LSR MIB's
   mplsInterfaceConfTable in such a way as to identify which
   MPLS-type interfaces have LC-ATM or LC-FR capabilities.

   Comments should be made directly to the MPLS mailing list at
   mpls@uu.net.

   This memo does not, in its draft form, specify a standard for the
   Internet community.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
   NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   RFC 2119, reference [RFC2119].


3. Terminology

   This document uses terminology from the document describing the
   MPLS architecture [RFC3031], as well as RFC3035 and RFC3034.
   Specifically, the following terms will be used in this document.

   LC-FR   RFC3034 defines a label switching controlled Frame Relay
           (LC-FR) interface a Frame-Relay interface controlled by the
           label switching control component.  Packets traversing



Nadeau et al.              Expires December 2002             [Page 2]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



           such an interface carry labels in the DLCI field


   LC-ATM RFC3035 defines a label switching controlled ATM (LC-ATM)
          interface as an ATM interface controlled by the label
          switching control component.  When a packet traversing such
          an interface is received, it is treated as a labeled packet.
          The packet's top label is inferred either from the contents
          of the VCI field or the combined contents of the VPI and VCI
          fields. Any two LDP peers which are connected via an LC-ATM
          interface will use LDP negotiations to determine which of
          these cases is applicable to that interface.

4. The SNMP Management Framework

   The SNMP Management Framework presently consists of five major
   components:

    o   An overall architecture, described in RFC 2571 [RFC2571].

    o   Mechanisms for describing and naming objects and events for the
        purpose of management.  The first version of this Structure of
        Management Information (SMI) is called SMIv1 and described in
        STD 16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC
        1215 [RFC1215].  The second version, called SMIv2, is described
        in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and
        STD 58, RFC 2580 [RFC2580].

    o   Message protocols for transferring management information.  The
        first version of the SNMP message protocol is called SNMPv1 and
        described in STD 15, RFC 1157 [RFC1157].  A second version of
        the SNMP message protocol, which is not an Internet standards
        track protocol, is called SNMPv2c and described in RFC 1901
        [RFC1901] and RFC 1906 [RFC1906].  The third version of the
        message protocol is called SNMPv3 and described in RFC 1906
        [RFC1906], RFC 2572 [RFC2572] and RFC 2574 [RFC2574].

    o   Protocol operations for accessing management information.  The
        first set of protocol operations and associated PDU formats is
        described in STD 15, RFC 1157 [RFC1157].  A second set of
        protocol operations and associated PDU formats is described in
        RFC 1905 [RFC1905].

    o   A set of fundamental applications described in RFC 2573
        [RFC2573] and the view-based access control mechanism described
        in RFC 2575 [RFC2575].

   A more detailed introduction to the current SNMP Management Framework
   can be found in RFC 2570 [RFC2570].




Nadeau et al.              Expires December 2002             [Page 3]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the mechanisms defined in the SMI.

   This memo specifies a MIB module that is compliant to the SMIv2.  A
   MIB conforming to the SMIv1 can be produced through the appropriate
   translations.  The resulting translated MIB must be semantically
   equivalent, except where objects or events are omitted because no
   translation is possible (use of Counter64).  Some machine readable
   information in SMIv2 will be converted into textual descriptions in
   SMIv1 during the translation process.  However, this loss of machine
   readable information is not considered to change the semantics of the
   MIB.

5. Interface Stacking Relationship for MPLS

   The MPLS-LSR and MPLS-TE MIBs define the media-specific
   extensions to the Interfaces Group for managing MPLS interfaces.
   They also define the conceptual interface stacking as follows.

      +------------------------------------------------+
      | MPLS tunnel interface ifType = mplsTunnel(150) |
      +------------------------------------------------+
      | MPLS-interface ifType = mpls(166)              +
      +------------------------------------------------+
      | Underlying Layer...                            +
      +------------------------------------------------+

   In the above diagram, MPLS-enabled interfaces are
   represented by an ifEntry with ifType set to mpls(166).
   This subinterface is conceptually stacked above some
   underlying layer. The "Underlying Layer..." refers to the
   ifIndex of any interface type, which has been defined for MPLS
   interworking. Examples include ATM, Frame Relay, Ethernet, etc.
   The top-most layer defines zero or more TE tunnel interfaces
   that are conceptually stacked above the MPLS-type interface
   that carries its traffic.

6. Interface Stacking of LC-ATM

   Since LC-ATM interfaces can carry labeled MPLS traffic,
   they too are considered MPLS subinterfaces with ifType =
   mpls(166). They differ slightly in their capability
   from a packet-oriented MPLS interface in that they may
   carry ATM or Frame-Relay encapsulated traffic. It is
   thus beneficial to identify them as such. To identify
   them as such, two tables are defined which extend the
   MPLS-LSR MIB's mplsInterfaceConfTable (see section 7 for
   LC-ATM or 8 for LC-FR).




Nadeau et al.              Expires December 2002             [Page 4]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



7. MPLS Label Controlled ATM MIB Definitions

MPLS-LC-ATM-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE
      FROM SNMPv2-SMI
   MODULE-COMPLIANCE, OBJECT-GROUP
      FROM SNMPv2-CONF
   RowStatus, StorageType, TruthValue
      FROM SNMPv2-TC
   mplsInterfaceConfIndex
      FROM MPLS-LSR-MIB
   AtmVpIdentifier
      FROM ATM-TC-MIB
   mplsMIB, MplsAtmVcIdentifier
      FROM MPLS-TC-MIB
   ;

mplsLcAtmMIB MODULE-IDENTITY
   LAST-UPDATED "200205101200Z"  -- 10 May 2002 12:00:00 GMT
   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
   CONTACT-INFO
       "        Thomas D. Nadeau
        Postal: Cisco Systems, Inc.
                250 Apollo Drive
                Chelmsford, MA 01824
        Tel:    +1-978-244-3051
        Email:  tnadeau@cisco.com


                Subrahmanya Hegde
        Postal: Cisco Systems, Inc.
                225 East Tazman Drive
        Tel:    +1-408-525-6562
        Email:  subrah@cisco.com

        General comments should be sent to mpls@uu.net
       "
   DESCRIPTION
       "This MIB contains managed object definitions for
        MPLS Label Controlled ATM interfaces as defined in
        RFC3035."

   -- Revision history.
   REVISION
       "200012251200Z"  -- 25 December 2001 12:00:00 GMT
   DESCRIPTION
       "Initial revision, published as part of RFC XXXX."
   ::= { mplsMIB n } -- To Be Assigned, maybe 6



Nadeau et al.              Expires December 2002             [Page 5]

Internet Draft              LC ATM/FR MIBs              June 20, 2002




-- Top level components of this MIB.

-- Tables, Scalars, Notifications, Conformance
mplsLcAtmNotifyPrefix  OBJECT IDENTIFIER ::= { mplsLcAtmMIB 0 }
mplsLcAtmObjects       OBJECT IDENTIFIER ::= { mplsLcAtmMIB 1 }
mplsLcAtmNotifications OBJECT IDENTIFIER ::= { mplsLcAtmMIB 2 }
mplsLcAtmConformance   OBJECT IDENTIFIER ::= { mplsLcAtmMIB 3 }

-- MPLS LC-ATM Interface Configuration Table.

mplsLcAtmIfConfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsLcAtmIfConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS LC-ATM
        capability and associated information. In particular,
        this table extends the MPLS-LSR MIB's
        mplsInterfaceConfTable."
   ::= { mplsLcAtmObjects 1 }

mplsLcAtmIfConfEntry OBJECT-TYPE
   SYNTAX        MplsLcAtmIfConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every interface capable of supporting MPLS LC-ATM.
        Each entry in this table will exist only if a
        corresponding entry in ifTable and mplsInterfaceConfTable
        exist. If the associated entries in ifTable and
        mplsInterfaceConfTable are deleted, the corresponding
        entry in this table must also be deleted shortly
        thereafter. "
   INDEX       { mplsInterfaceConfIndex }
      ::= { mplsLcAtmIfConfTable 1 }

MplsLcAtmIfConfEntry ::= SEQUENCE {
   mplsLcAtmCtrlVpi          AtmVpIdentifier,
   mplsLcAtmCtrlVci          MplsAtmVcIdentifier,
   mplsLcAtmUnlabTrafVpi     AtmVpIdentifier,
   mplsLcAtmUnlabTrafVci     MplsAtmVcIdentifier,
   mplsLcAtmVcMerge          TruthValue,
   mplsLcAtmIfConfRowStatus  RowStatus,
   mplsLcAtmIfConfStoreType  StorageType
}

mplsLcAtmCtrlVpi OBJECT-TYPE
   SYNTAX        AtmVpIdentifier



Nadeau et al.              Expires December 2002             [Page 6]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the VPI value over which this
        LSR is willing to accept control traffic on
        this interface."
   ::= { mplsLcAtmIfConfEntry 1 }

mplsLcAtmCtrlVci OBJECT-TYPE
   SYNTAX        MplsAtmVcIdentifier
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the VCI value over which this
        LSR is willing to accept control traffic
        on this interface."
   ::= { mplsLcAtmIfConfEntry 2 }

mplsLcAtmUnlabTrafVpi OBJECT-TYPE
   SYNTAX        AtmVpIdentifier
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the max VPI value over which this
        LSR is willing to accept unlabeled traffic
        on this interface."
   ::= { mplsLcAtmIfConfEntry 3 }

mplsLcAtmUnlabTrafVci OBJECT-TYPE
   SYNTAX        MplsAtmVcIdentifier
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the VCI value over which this
        LSR is willing to accept unlabled traffic
        on this interface."
   ::= { mplsLcAtmIfConfEntry 4 }

mplsLcAtmVcMerge OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "If set to true(0), indicates that this interface
        is capabile of ATM VC merge, otherwise it MUST
        be set to false(1)."
   DEFVAL     { false }
   ::= { mplsLcAtmIfConfEntry 5 }

mplsLcAtmIfConfRowStatus OBJECT-TYPE



Nadeau et al.              Expires December 2002             [Page 7]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is object is used to create and
        delete entries in this table. When configuring
        entries in this table, the corresponding
        corresponding ifEntry and mplsInterfaceConfEntry
        MUST exist before hand. If an entry is attempted
        to be created by a manager for a corresponding
        mplsInterfaceConfEntry that does not support LC-ATM,
        the agent MUST return an inconsistentValue error.
        If this table is implemented read-only, then the
        agent must set this object to active(1) when this
        row is made active. If this table is implemented
        writable, then an agent MUST not allow modification
        to its objects once this value is set to active(1)."
   ::= { mplsLcAtmIfConfEntry 6 }

 mplsLcAtmIfConfStoreType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This SNMP storage type for this entry. All objects
        are writable for permanent objects."
   ::= { mplsLcAtmIfConfEntry 7 }

-- End of mplsLcAtmIfConfTable

-- Notification Configuration

-- End of notifications.


-- Module compliance.

mplsLcAtmGroups
   OBJECT IDENTIFIER ::= { mplsLcAtmConformance 1 }

mplsLcAtmCompliances
   OBJECT IDENTIFIER ::= { mplsLcAtmConformance 2 }

mplsLcAtmModuleCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "Compliance statement for agents that support
        MPLS LC-ATM Interfaces."
   MODULE -- this module




Nadeau et al.              Expires December 2002             [Page 8]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



      -- The mandatory groups have to be implemented
      -- by all LSRs.  However, they may all be supported
      -- as read-only objects in the case where manual
      -- configuration is unsupported.

      MANDATORY-GROUPS {
         mplsLcAtmIfGroup
      }

      GROUP mplsLcAtmIfGroup
      DESCRIPTION
          "This group is mandatory for those LSRs
           that support LC-ATM interfaces."

      -- mplsLcAtmIfConfTable

      OBJECT      mplsLcAtmCtrlVpi
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmCtrlVci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmUnlabTrafVpi
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmUnlabTrafVci,
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmVcMerge
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmIfConfRowStatus
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcAtmIfConfStoreType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."



Nadeau et al.              Expires December 2002             [Page 9]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   ::= { mplsLcAtmCompliances 1 }


-- Units of conformance.

mplsLcAtmIfGroup OBJECT-GROUP
   OBJECTS {
             mplsLcAtmCtrlVpi,
             mplsLcAtmCtrlVci,
             mplsLcAtmUnlabTrafVpi,
             mplsLcAtmUnlabTrafVci,
             mplsLcAtmVcMerge,
             mplsLcAtmIfConfRowStatus,
             mplsLcAtmIfConfStoreType
    }
   STATUS  current
   DESCRIPTION
          "Collection of objects needed for MPLS LC-ATM
           interface configuration."
   ::= { mplsLcAtmGroups 1 }

END

8. MPLS Label Controlled Frame-Relay MIB Definitions

MPLS-LC-FR-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE
      FROM SNMPv2-SMI
   MODULE-COMPLIANCE, OBJECT-GROUP
      FROM SNMPv2-CONF
   RowStatus, StorageType
      FROM SNMPv2-TC
   mplsInterfaceConfIndex
      FROM MPLS-LSR-MIB
   DLCI
      FROM FRAME-RELAY-DTE-MIB
   mplsMIB
      FROM MPLS-TC-MIB
   ;

mplsLcFrMIB MODULE-IDENTITY
   LAST-UPDATED "200205101200Z"  -- 10 May 2002 12:00:00 GMT
   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
   CONTACT-INFO
       "        Thomas D. Nadeau
        Postal: Cisco Systems, Inc.
                250 Apollo Drive
                Chelmsford, MA 01824



Nadeau et al.             Expires December 2002             [Page 10]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



        Tel:    +1-978-244-3051
        Email:  tnadeau@cisco.com


                Subrahmanya Hegde
        Postal: Cisco Systems, Inc.
                225 East Tazman Drive
        Tel:    +1-408-525-6562
        Email:  subrah@cisco.com

        General comments should be sent to mpls@uu.net
       "
   DESCRIPTION
       "This MIB contains managed object definitions for
        MPLS Label Controlled Frame-Relay interfaces as defined
        in RFC3034."

   -- Revision history.
   REVISION
       "200012251200Z"  -- 25 December 2001 12:00:00 GMT
   DESCRIPTION
       "Initial revision, published as part of RFC XXXX."
   ::= { mplsMIB n } -- To Be Assigned, maybe 7

-- Top level components of this MIB.

-- Tables, Scalars, Notifications, Conformance
mplsLcFrNotifyPrefix  OBJECT IDENTIFIER ::= { mplsLcFrMIB 0 }
mplsLcFrObjects       OBJECT IDENTIFIER ::= { mplsLcFrMIB 1 }
mplsLcFrNotifications OBJECT IDENTIFIER ::= { mplsLcFrMIB 2 }
mplsLcFrConformance   OBJECT IDENTIFIER ::= { mplsLcFrMIB 3 }

-- MPLS LC-FR Interface Configuration Table.

mplsLcFrIfConfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsLcFrIfConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS LC-FR
        capability and associated information. In particular,
        this table extends the MPLS-LSR MIB's
        mplsInterfaceConfTable."
   ::= { mplsLcFrObjects 1 }

mplsLcFrIfConfEntry OBJECT-TYPE
   SYNTAX        MplsLcFrIfConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION



Nadeau et al.             Expires December 2002             [Page 11]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



       "An entry in this table is created by an LSR for
        every interface capable of supporting MPLS LC-FR.
        Each entry in this table will exist only if a
        corresponding entry in ifTable and mplsInterfaceConfTable
        exist. If the associated entries in ifTable and
        mplsInterfaceConfTable are deleted, the corresponding
        entry in this table must also be deleted shortly
        thereafter. "
   INDEX       { mplsInterfaceConfIndex }
      ::= { mplsLcFrIfConfTable 1 }

MplsLcFrIfConfEntry ::= SEQUENCE {
   mplsLcFrTrafficMinDlci   DLCI,
   mplsLcFrTrafficMaxDlci   DLCI,
   mplsLcFrCtrlMinDlci      DLCI,
   mplsLcFrCtrlMaxDlci      DLCI,
   mplsLcFrIfConfRowStatus  RowStatus,
   mplsLcFrIfConfStoreType  StorageType
}

mplsLcFrTrafficMinDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the minimum DLCI value over which this
        LSR is willing to accept traffic on this
        interface."
   ::= { mplsLcFrIfConfEntry 1 }

mplsLcFrTrafficMaxDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the max DLCI value over which this
        LSR is willing to accept traffic on this
        interface."
   ::= { mplsLcFrIfConfEntry 2 }

mplsLcFrCtrlMinDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the min DLCI value over which this
        LSR is willing to accept control traffic
        on this interface."
   ::= { mplsLcFrIfConfEntry 3 }




Nadeau et al.             Expires December 2002             [Page 12]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



mplsLcFrCtrlMaxDlci OBJECT-TYPE
   SYNTAX        DLCI
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is the max DLCI value over which this
        LSR is willing to accept control traffic
        on this interface."
   ::= { mplsLcFrIfConfEntry 4 }

mplsLcFrIfConfRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This is object is used to create and
        delete entries in this table. When configuring
        entries in this table, the corresponding
        corresponding ifEntry and mplsInterfaceConfEntry
        MUST exist before hand. If an entry is attempted
        to be created by a manager for a corresponding
        mplsInterfaceConfEntry that does not support LC-FR,
        the agent MUST return an inconsistentValue error.
        If this table is implemented read-only, then the
        agent must set this object to active(1) when this
        row is made active. If this table is implemented
        writable, then an agent MUST not allow modification
        to its objects once this value is set to active(1)."
   ::= { mplsLcFrIfConfEntry 5 }

 mplsLcFrIfConfStoreType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This SNMP storage type for this entry. All objects
        are writable for permanent entries."
   ::= { mplsLcFrIfConfEntry 6 }

-- End of mplsLcFrIfConfTable

-- Notification Configuration

-- End of notifications.


-- Module compliance.

mplsLcFrGroups
   OBJECT IDENTIFIER ::= { mplsLcFrConformance 1 }



Nadeau et al.             Expires December 2002             [Page 13]

Internet Draft              LC ATM/FR MIBs              June 20, 2002




mplsLcFrCompliances
   OBJECT IDENTIFIER ::= { mplsLcFrConformance 2 }

mplsLcFrModuleCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "Compliance statement for agents that support
        MPLS LC-FR Interfaces."
   MODULE -- this module

      -- The mandatory groups have to be implemented
      -- by all LSRs.  However, they may all be supported
      -- as read-only objects in the case where manual
      -- configuration is unsupported.

      MANDATORY-GROUPS {
         mplsLcFrIfGroup
      }

      GROUP mplsLcFrIfGroup
      DESCRIPTION
          "This group is mandatory for those LSRs
           that support LC-FR interfaces."

      -- mplsLcFrIfConfTable

      OBJECT     mplsLcFrTrafficMinDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT     mplsLcFrTrafficMaxDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcFrCtrlMinDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcFrCtrlMaxDlci
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsLcFrIfConfRowStatus
      MIN-ACCESS  read-only
      DESCRIPTION



Nadeau et al.             Expires December 2002             [Page 14]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



          "Write access is not required."

      OBJECT      mplsLcFrIfConfStoreType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

   ::= { mplsLcFrCompliances 1 }


-- Units of conformance.

mplsLcFrIfGroup OBJECT-GROUP
   OBJECTS {
        mplsLcFrTrafficMinDlci,
        mplsLcFrTrafficMaxDlci,
        mplsLcFrCtrlMinDlci,
        mplsLcFrCtrlMaxDlci,
        mplsLcFrIfConfRowStatus,
        mplsLcFrIfConfStoreType
    }
   STATUS  current
   DESCRIPTION
          "Collection of objects needed for MPLS LC-FR
           interface configuration."
   ::= { mplsLcFrGroups 1 }

END

12.   Security Considerations

   This module does not define any management objects. Instead, it
   defines two new ifTypes which may be used by other MPLS MIB
   modules to define management objects.

   Meaningful security considerations can only be written in the MIB
   modules that define management objects. Therefore, this document has
   no impact on the security of the Internet.


13.   Acknowledgments

  TBD.

14.   References

   [Assigned]    Reynolds, J., and J. Postel, "Assigned Numbers",
                 RFC 1700, October 1994. See also:
                 http://www.isi.edu/in-notes/iana/assignments/smi-
                 numbers



Nadeau et al.             Expires December 2002             [Page 15]

Internet Draft              LC ATM/FR MIBs              June 20, 2002




   [IANAFamily]  Internet Assigned Numbers Authority (IANA), ADDRESS
                 FAMILY NUMBERS,(http://www.isi.edu/in-
                 notes/iana/assignements/address-family-numbers),
                 for MIB see:
                 ftp://ftp.isi.edu/mib/iana.mib/ianaaddressfamilynum
                 bers.mib

   [TCMIB]       Nadeau, T., Cucchiara, J., Srinivasan, C,
                 Viswanathan, A. and H. Sjostrand, "Definition of
                 Textual Conventions and OBJECT-IDENTITIES for Multi-
                 Protocol Label Switching (MPLS) Management",
                 Internet Draft <draft-ietf-mpls-tc-mib-02.txt>,
                 August 2001.

   [RFC1155]     Rose, M., and K. McCloghrie, "Structure and
                 Identification of Management Information for TCP/IP-
                 based Internets", RFC 1155, May 1990.

   [RFC1157]     Case, J., Fedor, M., Schoffstall, M., and J. Davin,
                 "Simple Network Management Protocol", RFC 1157, May
                 1990.

   [RFC1215]     M. Rose, "A Convention for Defining Traps for use
                 with the SNMP", RFC 1215, March 1991.

   [RFC1901]     Case, J., McCloghrie, K., Rose, M., and S.
                 Waldbusser, "Introduction to Community-based
                 SNMPv2", RFC 1901, January 1996.

   [RFC1905]     Case, J., McCloghrie, K., Rose, M., and S.
                 Waldbusser, "Protocol Operations for Version 2 of
                 the Simple Network Management Protocol (SNMPv2)",
                 RFC 1905, January 1996.

   [RFC1906]     Case, J., McCloghrie, K., Rose, M., and S.
                 Waldbusser, "Transport Mappings for Version 2 of
                 the Simple Network Management Protocol (SNMPv2)",
                 RFC 1906, January 1996.

   [RFC2119]     Bradner, S., "Key words for use in RFCs to Indicate
                 Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2233]     McCloghrie, K., and F. Kastenholtz, "The Interfaces
                 Group MIB using SMIv2", RFC 2233, Nov. 1997

   [RFC2401]     Kent, S., and Atkinson, R., "Security Architecture
                 for the Internet Protocol", RFC 2401, November
                 1998.




Nadeau et al.             Expires December 2002             [Page 16]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   [RFC2515]     Tesink, K., "Definitions of Managed Objects for ATM
                 Management", RFC 2515, Feb. 1999

   [RFC2570]     Case, J., Mundy, R., Partain, D., and B. Stewart,
                 "Introduction to Version 3 of the Internet-standard
                 Network Management Framework", RFC 2570, April
                 1999.

   [RFC2571]     Harrington, D., Presuhn, R., and B. Wijnen, "An
                 Architecture for Describing SNMP Management
                 Frameworks", RFC 2571, April 1999.

   [RFC2572]     Case, J., Harrington D., Presuhn R., and B. Wijnen,
                 "Message Processing and Dispatching for the Simple
                 Network Management Protocol (SNMP)", RFC 2572,
                 April 1999.

   [RFC2573]     Levi, D., Meyer, P., and B. Stewart, "SNMPv3
                 Applications", RFC 2573, April 1999.

   [RFC2574]     Blumenthal, U., and B. Wijnen, "User-based Security
                 Model (USM) for version 3 of the Simple Network
                 Management Protocol (SNMPv3)", RFC 2574, April
                 1999.

   [RFC2575]     Wijnen, B., Presuhn, R., and K. McCloghrie, "View-
                 based Access Control Model (VACM) for the Simple
                 Network Management Protocol (SNMP)", RFC 2575,
                 April 1999.

   [RFC2578]     McCloghrie, K., Perkins, D., Schoenwaelder, J.,
                 Case, J., Rose, M., and S. Waldbusser, "Structure
                 of Management Information Version 2 (SMIv2)", STD
                 58, RFC 2578, April 1999.

   [RFC2579]     McCloghrie, K., Perkins, D., Schoenwaelder, J.,
                 Case, J., Rose, M., and S. Waldbusser, "Textual
                 Conventions for SMIv2", STD 58, RFC 2579, April
                 1999.

   [RFC2702]     Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M.,
                 and J. McManus, "Requirements for Traffic
                 Engineering Over MPLS", RFC 2702, September 1999.

   [RFC2580]     McCloghrie, K., Perkins, D., Schoenwaelder, J.,
                 Case, J., Rose, M., and S. Waldbusser, "Conformance
                 Statements for SMIv2", STD 58, RFC 2580, April
                 1999.

   [RFC3031]     Rosen, E., Viswanathan, A., and R. Callon,



Nadeau et al.             Expires December 2002             [Page 17]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



                 "Multiprotocol Label Switching Architecture", RFC
                 3031, January 2001.

   [RFC3032]     Rosen, E., Rekhter, Y., Tappan, D., Farinacci, D.,
                 Federokow, G., Li, T., and A. Conta, "MPLS Label
                 Stack Encoding", RFC 3032, January 2001.


15.   Authors' Addresses

  Thomas D. Nadeau
  Cisco Systems, Inc.
  250 Apollo Drive
  Chelmsford, MA 01824
  Phone: +1-978-244-3051
  Email: tnadeau@cisco.com

  Subrahmanya Hegde
  Cisco Systems, Inc.
  225 East Tazman Drive
  Phone: +1-408-525-6562
  Email: subrah@cisco.com


16.   Full Copyright Statement


   Copyright (C) The Internet Society (2001).  All Rights Reserved.

   This document and translations of it may be copied and furnished
   to others, and derivative works that comment on or otherwise
   explain it or assist in its implementation may be prepared,
   copied, published and distributed, in whole or in part, without
   restriction of any kind, provided that the above copyright notice
   and this paragraph are included on all such copies and derivative
   works.  However, this document itself may not be modified in any
   way, such as by removing the copyright notice or references to the
   Internet Society or other Internet organizations, except as needed
   for the  purpose of developing Internet standards in which case
   the procedures for copyrights defined in the Internet Standards
   process must be followed, or as required to translate it into
   languages other than English.

   The limited permissions granted above are perpetual and will not
   be revoked by the Internet Society or its successors or assigns.
   This document and the information contained herein is provided on
   an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED



Nadeau et al.             Expires December 2002             [Page 18]

Internet Draft              LC ATM/FR MIBs              June 20, 2002



   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.




















































Nadeau et al.             Expires December 2002             [Page 19]


Html markup produced by rfcmarkup 1.108, available from http://tools.ietf.org/tools/rfcmarkup/