[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-lengyel-ngo-partial-lock) 00 01 02 03 04 05 06 07 08 09 10 11 RFC 5717

NETCONF                                                       B. Lengyel
Internet-Draft                                                  Ericsson
Intended status: Standards Track                            M. Bjorklund
Expires: May 2, 2009                                      Tail-f Systems
                                                        October 29, 2008


                      Partial Lock RPC for NETCONF
                   draft-ietf-netconf-partial-lock-04

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on May 2, 2009.

Copyright Notice

   Copyright (C) The IETF Trust (2008).

Abstract

   The NETCONF protocol defines the lock and unlock RPCs, used to lock
   entire configuration datastores.  In some situations, a way to lock
   only parts of a configuration datastore is required.  This document
   defines a capability-based extension to the NETCONF protocol for
   locking portions of a configuration datastore.





Lengyel & Bjorklund        Expires May 2, 2009                  [Page 1]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Definition of Terms  . . . . . . . . . . . . . . . . . . .  3
   2.  Partial Locking Capability . . . . . . . . . . . . . . . . . .  3
     2.1.  Overview . . . . . . . . . . . . . . . . . . . . . . . . .  3
     2.2.  Dependencies . . . . . . . . . . . . . . . . . . . . . . .  4
     2.3.  Capability Identifier  . . . . . . . . . . . . . . . . . .  4
     2.4.  New Operations . . . . . . . . . . . . . . . . . . . . . .  4
       2.4.1.  <partial-lock> . . . . . . . . . . . . . . . . . . . .  4
       2.4.2.  <partial-unlock> . . . . . . . . . . . . . . . . . . .  8
     2.5.  Modifications to Existing Operations . . . . . . . . . . .  9
     2.6.  Interactions with Other Capabilities . . . . . . . . . . .  9
       2.6.1.  Candidate Configuration Capability . . . . . . . . . .  9
       2.6.2.  Confirmed Commit Capability  . . . . . . . . . . . . .  9
       2.6.3.  Distinct Startup Capability  . . . . . . . . . . . . . 10
   3.  Security Considerations  . . . . . . . . . . . . . . . . . . . 10
   4.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 11
   5.  Appendix A  -  XML Schema for Partial Locking (normative)  . . 12
   6.  Appendix B  - YANG Module for Partial Locking
       (non-normative)  . . . . . . . . . . . . . . . . . . . . . . . 16
   7.  Appendix C  -  Change Log  . . . . . . . . . . . . . . . . . . 19
     7.1.  03-04  . . . . . . . . . . . . . . . . . . . . . . . . . . 19
     7.2.  02-03  . . . . . . . . . . . . . . . . . . . . . . . . . . 19
     7.3.  01-02  . . . . . . . . . . . . . . . . . . . . . . . . . . 19
     7.4.  00-01  . . . . . . . . . . . . . . . . . . . . . . . . . . 19
     7.5.  -00  . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
   8.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 21
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 22
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 22
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 22
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 23
   Intellectual Property and Copyright Statements . . . . . . . . . . 24


















Lengyel & Bjorklund        Expires May 2, 2009                  [Page 2]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


1.  Introduction

   The NETCONF protocol [NETCONF] describes the lock and unlock RPCs
   that operate on entire configuration datastores.  Often, multiple
   management sessions need to be able to modify the configuration of a
   managed device in parallel.  In these cases, locking only parts of a
   configuration datastore is needed.  This document defines an
   extension to the NETCONF protocol to allow this.

   The mechanism for partial locking is based on the existing XPath
   filtering mechanisms.

   Partial locking is defined as a capability to NETCONF.

1.1.  Definition of Terms

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14, [RFC2119].


2.  Partial Locking Capability

2.1.  Overview

   The :partial-lock capability indicates that the device supports the
   locking of its configuration with a more limited scope than a
   complete configuration datastore.  The scope to be locked is
   specified by using restricted or full XPath expressions.  Partial
   locking covers configuration data, but not state data.

   The system MUST ensure that configuration resources covered by the
   lock are not modified by other NETCONF or non-NETCONF management
   operations such as SNMP and the CLI.

   The duration of the partial lock begins when the partial lock is
   granted and lasts until (1) either the corresponding <partial-unlock>
   operation succeeds or (2) the NETCONF session terminates.

   A NETCONF session MAY have multiple parts of one or more datastores
   (running, candidate, startup) locked using partial lock operations.
   The <partial-lock> operation returns a lock-id to identify each
   successfully acquired lock.







Lengyel & Bjorklund        Expires May 2, 2009                  [Page 3]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


2.2.  Dependencies

   The device MUST support restricted XPath expressions in the select
   element, as described in Section 2.4.1.  Optionally, if the :xpath
   capability is also supported, the device MUST also support using any
   XPath 1.0 expression in the select element.

2.3.  Capability Identifier

   urn:ietf:params:netconf:capability:partial-lock:1.0

2.4.  New Operations

2.4.1.  <partial-lock>

   The <partial-lock> operation allows the client to lock a portion of
   one or more datastores.  The portion to lock is specified with XPath
   expressions in the select elements and the list of datastores in the
   target element in the <partial-lock> operation.  Each XPath
   expression MUST return a node set.  Locking a node also protects the
   complete subtree under the node from modification by others.

   In some situations it is desirable that the same set of nodes are
   locked in more than one datastore.  As an example: if an interface is
   configured in the candidate datastore, it is dangerous if it is
   configured by someone else in a possibly conflicting manner in the
   running datastore.  For this reason <partial-lock> allows the locking
   of the same sections of the management data in one or multiple
   datastores.

   The select XPath expressions are evaluated only once at lock time.
   Thereafter, the scope of the lock is maintained as a set of nodes.
   If the configuration data is later altered in a way that would make
   the original select XPath expressions evaluate to a different set of
   nodes, this does not affect the scope of the partial lock.

   XPath is only used for the creation of the partial lock.
   Conceptually, the scope of the lock is defined by the returned node
   set and not by the XPath expression.

   A <partial-lock> operation MUST be handled atomically by the NETCONF
   server.  The server either locks all requested parts of the
   datastore(s) or none.  That is, if during the <partial-lock>
   operation one of the requested parts cannot be locked, the server
   MUST unlock all parts that were previously locked during that
   operation.

   If a node is locked by a session, only that same session is able to



Lengyel & Bjorklund        Expires May 2, 2009                  [Page 4]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


   modify that node or any node in the subtree underneath it.

   If a top level node of a locked subtree is deleted, any other session
   can recreate it, as it is no longer covered by the lock.  If all top
   level nodes are deleted, the lock will still be present.  However,
   its scope will become nil (i.e., the lock will not cover any nodes).

   A NETCONF server MUST be able to grant multiple simultaneous partial
   locks to a single NETCONF session.  If the scope of the individual
   locks overlaps, nodes in the common area MUST be locked until all of
   the locks are released.

   A partial lock operation MUST fail if:

   o  Any NETCONF session (including the current session) owns the
      global lock on any target datastore.

   o  Any part of the scope to be locked is already locked by another
      management session/protocol, including other NETCONF sessions
      using the <partial-lock> or any other non-NETCONF management
      method.

   o  The NETCONF server implements access control, and the locking user
      does not have sufficient rights to all parts of a datastore
      section to be locked.  The exact handling of access rights is
      outside the scope of this document, but it is assumed that there
      is an access control system that MAY deny or allow the partial
      lock operation.


   As with most locking systems, it is possible that two management
   sessions trying to lock different parts of the configuration could
   become dead-locked.  To avoid this situation, clients SHOULD lock
   everything they need in one operation.  If that operation fails, the
   client SHOULD back down, release any previously acquired locks, and
   retry the procedure after waiting some time interval.  The length of
   the interval SHOULD be random to avoid repeated dead-locks when both
   (or all) clients back down and then retry the partial lock operation.

   The <partial-lock> operation is designed for simplicity, so when a
   partial lock is executed you get what you asked for: a set of nodes
   that are locked for writing.  There are some other issues that are
   intentionally not addressed:

   o  Locking does not affect read operations.

   o  If part of a datastore is locked, this has no effect on any
      unlocked parts of the datastore.  If this is a problem (e.g.,



Lengyel & Bjorklund        Expires May 2, 2009                  [Page 5]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


      changes depend on data values in the unlocked part of the
      datastore), these values SHOULD be included in the scope of the
      lock.

   o  Configuration data can be edited both inside and outside the scope
      of a lock.  It is the responsibility of the NETCONF client
      application to lock all relevant parts of a datastore that are
      crucial for a specific management action.


   Note: The <partial-lock> operation does not modify the global <lock>
   operation defined in the base NETCONF Protocol [NETCONF].  If part of
   a datastore is already locked by <partial-lock>, then a global lock
   for that datastore MUST fail even if the global lock is requested by
   the NETCONF session that owns the partial lock.

2.4.1.1.  Parameters, Result, Examples

   Parameters:

   target:  Name of one or more configuration datastores of which a part
       shall be locked.  If multiple datastores are specified the same
       select parameter(s) are used for all of them.  For each datastore
       locking of the same set of nodes will be requested.

   select:  One or more 'select' elements, each containing an XPath
       expression.  The XPath expression is evaluated in a context where
       the context node is the root of the server's conceptual data
       model, and the set of namespace declarations are those in scope
       on the select element.

       Each select expression is evaluated for each targeted datastore.

       The nodes that matched the select expression and are locked are
       reported in the rpc-reply message.  Note that if some of the
       requested nodes exist only in one of the datastores, the lock is
       granted on different nodes in different datastores.

       Each select expression MUST return a node set, and at least one
       of the node sets for one of the specified datastores MUST be non-
       empty.

       If the device supports the :xpath capability, any valid XPath 1.0
       expression can be used.  If the device does not support the
       :xpath capability, the XPath expression MUST be limited to an
       Instance Identifier expression.  An Instance Identifier is an
       absolute path expression in abbreviated syntax, where predicates
       are used only to specify values for nodes defined as keys to



Lengyel & Bjorklund        Expires May 2, 2009                  [Page 6]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


       distinguish multiple instances.

   Example: Lock virtual router 1 and interface eth1


    <nc:rpc
      xmlns="urn:ietf:params:xml:ns:netconf:partial-lock:1.0"
      xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
      message-id="135">
        <partial-lock>
            <target>
                <running/>
            </target>
            <select xmlns:rte="http://example.com/ns/route">
                /rte:routing/rte:virtualRouter[rte:routerName='router1']
            </select>
            <select xmlns:if="http://example.com/ns/interface">
                /if:interfaces/if:interface[if:id='eth1']
            </select>
         </partial-lock>
    </nc:rpc>

    <nc:rpc-reply
      xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
      xmlns="urn:ietf:params:xml:ns:netconf:partial-lock:1.0"
      message-id="135">
        <lock-id>127</lock-id>
        <running>
          <locked-node xmlns:rte="http://example.com/ns/route">
              /rte:routing/rte:virtualRouter[rte:routerName='router1']
          </locked-node>
          <locked-node xmlns:if="http://example.com/ns/interface">
              /if:interfaces/if:interface[if:id='eth1']
          </locked-node>
        </running>
    </nc:rpc-reply>


   Positive Response:

   If the device was able to satisfy the request, an <rpc-reply> is sent
   with a <lock-id> element (lock identifier) in the <rpc-reply>
   element.  A list of locked nodes per datastore is also returned in
   Instance Identifier format.

   Negative Response:

   If a lock is already held by another session on any node within the



Lengyel & Bjorklund        Expires May 2, 2009                  [Page 7]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


   subtrees to be locked, the <error-tag> element is 'lock-denied' and
   the <error-info> element includes the <session-id> of the lock owner.
   If the lock is held by a non-NETCONF session, a <session-id> of 0
   (zero) is included.  If needed the returned session-id may be used to
   <kill-session> the NETCONF session holding the lock.  The same error
   response is returned if the requesting session already holds the
   (global) lock for the same datastore.

   If all the select expressions return an empty node set, the <error-
   tag> is 'operation-failed', and the <error-app-tag> is 'no-matches'.

   If any select expression returns something other than a node set, the
   <error-tag> is 'invalid-value', the <error-app-tag> is 'XPath does
   not return a node set'.

   If the :xpath capability is not supported and the XPath expression is
   not an Instance Identifier, the <error-tag> is 'invalid-value', the
   <error-app-tag> is ':xpath capability not supported'.

   If access control denies the partial lock, the <error-tag> is
   'access-denied'.


2.4.1.2.  Reserving model sections for future work

   Partial lock cannot be used to lock non-existent nodes, which would
   effectively attempt to reserve them for future use.  To guarantee
   that a node cannot be created by some other session, the parent node
   SHOULD be locked, the top level node of the new section created, and
   then locked with another <partial-lock> operation.  After this, the
   lock on the parent node SHOULD be removed.

2.4.2.  <partial-unlock>

   The operation unlocks the parts of the datastores that were
   previously locked using <partial-lock> during the same session.

   Parameters:

   lock-id:  Lock identifier to unlock, taken from a reply to a previous
       <partial-lock> operation.










Lengyel & Bjorklund        Expires May 2, 2009                  [Page 8]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


   Example: Unlock a previously created lock


      <nc:rpc xmlns="urn:ietf:params:xml:ns:netconf:partial-lock:1.0"
        xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
        message-id="136">
          <partial-unlock>
            <lock-id>127</lock-id>
          </partial-unlock>
      </nc:rpc>


   Positive Response:

   If the device was able to satisfy the request, an <rpc-reply> is sent
   that contains an <ok> element.  A positive response MUST be sent even
   if all of the locked parts of the datastore(s) have already been
   deleted.

   Negative Response:

   If the <lock-id> parameter does not identify a lock which is owned by
   the session, an 'invalid-value' error is returned.

2.5.  Modifications to Existing Operations

   A successful partial lock will cause a subsequent operation to fail
   if it attempts to modify the locked area and is executed in a NETCONF
   session other than the session that owns the lock.  All operations
   that modify the datastore are affected, including: <edit-config>,
   <copy-config>, <delete-config>, <commit> and <discard-changes>.  A
   successful partial lock will also cause the (global) <lock> operation
   to fail.  All of these operations are affected only if they are
   targeting the same datastore.

2.6.  Interactions with Other Capabilities

2.6.1.  Candidate Configuration Capability

   Partial locking of the candidate datastore can only be done if the
   :candidate capability is supported by the device.  Partial locking of
   the candidate datastore does not depend on whether the datastore was
   modified or not.

2.6.2.  Confirmed Commit Capability

   If:




Lengyel & Bjorklund        Expires May 2, 2009                  [Page 9]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


   o  a partial lock is requested for the running datastore, and

   o  the NETCONF server implements the :confirmed-commit capability,
      and

   o  there was a recent confirmed <commit> operation where the
      confirming <commit> operation has not been received

   then the lock MUST be denied, because if the confirmation does not
   arrive, the running datastore MUST be rolled back to its state before
   the commit.  The NETCONF server might therefore need to modify the
   configuration.
   In this case the <error-tag> 'in-use' and the <error-app-tag> 'Lock
   denied, Outstanding confirmed commit' is returned.

2.6.3.  Distinct Startup Capability

   Partial locking of the startup datastore can only be done if the
   :startup capability is supported by the device.


3.  Security Considerations

   The same considerations are relevant as for the base NETCONF Protocol
   [NETCONF].  It is assumed that the <partial-lock> and <partial-
   unlock> RPCs are only allowed for an authenticated user after passing
   some access control mechanism.

   A lock (either a partial lock or a global lock) might prevent other
   users from configuring the system.  The following mechanisms are in
   place to prevent the misuse of this possibility:

      Only an authenticated and authorized user can request a partial
      lock.

      The partial lock is automatically released when a session is
      terminated regardless of how the session ends.

      The <kill-session> operation makes it possible to terminate other
      users's sessions.

      The NETCONF server may log partial lock requests in an audit
      trail.



   A lock that is hung for some reason (e.g., a broken TCP connection
   that the server has not yet recognised) can be released using another



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 10]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


   NETCONF session by explicitly killing the session owning that lock
   using the <kill-session> operation.

   Partial locking is NOT an authorization mechanism; it SHOULD NOT be
   used to provide security or access control.  Partial locking SHOULD
   only be used as a mechanism for providing consistency when multiple
   managers are trying to configure the node.  It is vital that users
   easily understand the exact scope of a lock.  This is why the scope
   is determined when granting a lock and is not modified thereafter.


4.  IANA Considerations

   This document registers two URIs for the NETCONF XML namespace in the
   IETF XML registry [RFC3688].  Note that the capability URN is
   compliant to [NETCONF] section 10.3.

   +---------------+---------------------------------------------------+
   | Index         | Capability Identifier                             |
   +---------------+---------------------------------------------------+
   | :partial-lock | urn:ietf:params:netconf:capability:partial-lock:1 |
   |               | .0                                                |
   +---------------+---------------------------------------------------+

   URI: urn:ietf:params:xml:ns:netconf:partial-lock:1.0

   Registrant Contact: The IESG.

   XML: N/A, the requested URI is an XML namespace.






















Lengyel & Bjorklund        Expires May 2, 2009                 [Page 11]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


5.  Appendix A  -  XML Schema for Partial Locking (normative)

   The following XML Schema defines the <partial-lock> and <partial-
   unlock> operations:

  <?xml version="1.0" encoding="UTF-8"?>
  <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns="urn:ietf:params:xml:ns:netconf:partial-lock:1.0"
    xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
    targetNamespace="urn:ietf:params:xml:ns:netconf:partial-lock:1.0"
    elementFormDefault="qualified" attributeFormDefault="unqualified">

    <xs:annotation>
      <xs:documentation>
        Schema defining the partial-lock and unlock operations.
        organization "IETF NETCONF Working Group"
        contact
        "Balazs Lengyel
        Ericsson Hungary, Inc.
        balazs.lengyel@ericsson.com"
      </xs:documentation>
    </xs:annotation>

    <xs:import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
      schemaLocation="urn:ietf:params:xml:ns:netconf:base:1.0"/>

    <xs:complexType name="partialLockType">
      <xs:annotation>
        <xs:documentation>
          A NETCONF operation that locks part of one or more datastores.
        </xs:documentation>
      </xs:annotation>
      <xs:complexContent>
        <xs:extension base="nc:rpcOperationType">
          <xs:sequence>
            <xs:element name="target">
              <xs:annotation>
                <xs:documentation>
                  A list of one or more datastore names for NETCONF.
                </xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:sequence>
                  <xs:element name="startup" minOccurs="0">
                    <xs:complexType/>
                  </xs:element>
                  <xs:element name="candidate" minOccurs="0">
                    <xs:complexType/>



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 12]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


                  </xs:element>
                  <xs:element name="running" minOccurs="0">
                    <xs:complexType/>
                  </xs:element>
                </xs:sequence>
              </xs:complexType>
            </xs:element>
            <xs:element name="select" type="xs:string"
              maxOccurs="unbounded">
              <xs:annotation>
                <xs:documentation>
                  XPath expression that specifies the scope of the lock.
                  An Instance Identifier expression must be used unless
                  the :xpath capability is supported in which case any
                  XPath 1.0 expression is allowed.
                </xs:documentation>
              </xs:annotation>
            </xs:element>
          </xs:sequence>
        </xs:extension>
      </xs:complexContent>
    </xs:complexType>

    <xs:complexType name="partialUnLockType">
      <xs:annotation>
        <xs:documentation>
          A NETCONF operation that releases a previously acquired
          partial-lock.
        </xs:documentation>
      </xs:annotation>
      <xs:complexContent>
        <xs:extension base="nc:rpcOperationType">
          <xs:sequence>
            <xs:element name="lock-id" type="xs:unsignedInt">
              <xs:annotation>
                <xs:documentation>
                  Identifies the lock, SHOULD be used in the subsequent
                  partial-lock operation.
                </xs:documentation>
              </xs:annotation>
            </xs:element>
          </xs:sequence>
        </xs:extension>
      </xs:complexContent>
    </xs:complexType>

    <!-- <partial-lock> operation -->
    <xs:element name="partial-lock" type="partialLockType"



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 13]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


      substitutionGroup="nc:rpcOperation"/>

    <!-- <partial-unlock> operation -->
    <xs:element name="partial-unlock" type="partialUnLockType"
      substitutionGroup="nc:rpcOperation"/>

    <!-- reply to <partial-lock> -->

    <xs:complexType name="dataPartInPpartialLockReplyType">
      <xs:annotation>
        <xs:documentation>
          In a reply to a successful partial-lock request the content
          of the <rpc-reply> element MUST conform to this complex type.
        </xs:documentation>
      </xs:annotation>
      <xs:sequence>
        <xs:element name="lock-id" type="xs:unsignedInt">
          <xs:annotation>
            <xs:documentation>
              Identifies the lock to be released. Must be the value
              received in the response to the partial-lock operation.
            </xs:documentation>
          </xs:annotation>
        </xs:element>
        <xs:element name="running" minOccurs="0">
          <xs:annotation>
            <xs:documentation>
              List of locked nodes in the running datastore.
            </xs:documentation>
          </xs:annotation>
          <xs:complexType>
            <xs:sequence>
              <xs:element name="locked-node" type="xs:string"
                maxOccurs="unbounded">
              </xs:element>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
        <xs:element name="candidate" minOccurs="0">
          <xs:annotation>
            <xs:documentation>
              List of locked nodes in the candidate datastore.
            </xs:documentation>
          </xs:annotation>
          <xs:complexType>
            <xs:sequence>
              <xs:element name="locked-node" type="xs:string"
                maxOccurs="unbounded">



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 14]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


              </xs:element>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
        <xs:element name="startup" minOccurs="0">
          <xs:annotation>
            <xs:documentation>
              List of locked nodes in the startup datastore.
            </xs:documentation>
          </xs:annotation>
          <xs:complexType>
            <xs:sequence>
              <xs:element name="locked-node" type="xs:string"
                maxOccurs="unbounded">
              </xs:element>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
      </xs:sequence>
    </xs:complexType>

  </xs:schema>





























Lengyel & Bjorklund        Expires May 2, 2009                 [Page 15]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


6.  Appendix B  - YANG Module for Partial Locking (non-normative)

   The following YANG module defines the <partial-lock> and <partial-
   unlock> operations.  The YANG language is defined in
   [I-D.ietf-netmod-yang].

 module netconf-partial-lock {

   namespace urn:ietf:params:xml:ns:netconf:partial-lock:1.0;
   prefix pl;

   organization "IETF NETCONF Working Group";

   contact
     "Balazs Lengyel
      Ericsson
      balazs.lengyel@ericsson.com";

   description
     "This YANG module defines the <partial-lock> and
      <partial-unlock> operations.";

   revision 2008-10-31 {
     description "Initial version.";
   }

   grouping configNames {
     container target {
         description
             "A list of one or more datastore names.";
         leaf running   { type empty; }
         leaf candidate { type empty; }
         leaf startup   { type empty; }
         must "running or candidate or startup" {
             error-message "At least one datastore must be specified.";
         }
      }
   }

   rpc partial-lock {
     description
       "A NETCONF operation that locks part of one or more datastores.";
     input {
       uses configNames;
       leaf-list select {
         description
           "XPath expression that specifies the scope of the lock.
           An Instance Identifier expression MUST be used unless the



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 16]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


           :xpath capability is supported, in which case any XPath 1.0
           expression is allowed.";
         type string;
         min-elements 1;
       }
     }
     output {
       leaf lock-id {
         description
           "Identifies the lock, if granted. The lock-id MUST be
            used in the partial-unlock rpc.";
         type uint32;
       }
       container running {
           leaf-list locked-node {
               description "List of locked nodes
                            in the running datastore";
               type instance-identifier;
           }
       }
       container candidate {
           leaf-list locked-node {
               description "List of locked nodes
                            in the candidate datastore";
               type instance-identifier;
           }
       }
       container startup {
           leaf-list locked-node {
               description "List of locked nodes
                            in the startup datastore";
               type instance-identifier;
           }
       }
     }
   }

   rpc partial-unlock {
     description
       "A NETCONF operation that releases a previously acquired
       partial-lock.";
     input {
       leaf lock-id {
         description
           "Identifies the lock to be released. MUST be the value
           received in the response to the partial-lock operation.";
         type uint32;
       }



Lengyel & Bjorklund        Expires May 2, 2009                 [Page 17]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


     }
   }
 }
















































Lengyel & Bjorklund        Expires May 2, 2009                 [Page 18]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


7.  Appendix C  -  Change Log

7.1.  03-04

   Minor clarifications

   Added list of locked-nodes to the output of partial-lock.

   Added <target> wrapper around datastore names.

   Allowed atomic/one operation locking of datastore parts in multiple
   datastores.

   Improved English (hopefully)

   Removed the <data> element from rpc-reply following the text of
   rfc4741.

7.2.  02-03

   Minor clarifications

   Same descriptions in XSD and YANG.

7.3.  01-02

   Made XSD normative

   Clarified that no specific access control is assumed.

   Clarified that non-existing nodes are NOT covered by the lock, even
   if they where existing and covered by the lock when it was originally
   granted.

   Some rewording

   Added app-tags for two of the error cases.

   Made YANG an informative reference

   Enhanced security considerations.

7.4.  00-01

   Added YANG module.






Lengyel & Bjorklund        Expires May 2, 2009                 [Page 19]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


7.5.  -00

   Created from draft-lengyel-ngo-partial-lock-01.txt
















































Lengyel & Bjorklund        Expires May 2, 2009                 [Page 20]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


8.  Acknowledgements

   Thanks to Andy Bierman, Sharon Chisholm, Phil Shafer , David
   Harrington, Mehmet Ersue, Wes Hardaker and many other members of the
   NETCONF WG for providing important input to this document.














































Lengyel & Bjorklund        Expires May 2, 2009                 [Page 21]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


9.  References

9.1.  Normative References

   [NETCONF]  Enns, R., "NETCONF Configuration Protocol", RFC 4741,
              December 2006.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              January 2004.

9.2.  Informative References

   [I-D.ietf-netmod-yang]
              Bjorklund, M., "YANG - A data modeling language for
              NETCONF", draft-ietf-netmod-yang-01 (work in progress),
              August 2008.
































Lengyel & Bjorklund        Expires May 2, 2009                 [Page 22]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


Authors' Addresses

   Balazs Lengyel
   Ericsson

   Email: balazs.lengyel@ericsson.com


   Martin Bjorklund
   Tail-f Systems

   Email: mbj@tail-f.com







































Lengyel & Bjorklund        Expires May 2, 2009                 [Page 23]

Internet-Draft        Partial Lock RPC for NETCONF          October 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).





Lengyel & Bjorklund        Expires May 2, 2009                 [Page 24]


Html markup produced by rfcmarkup 1.109, available from https://tools.ietf.org/tools/rfcmarkup/