[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 RFC 4742

Network Working Group                                       M. Wasserman
Internet-Draft                                                ThingMagic
Expires: October 11, 2005                                     T. Goddard
                                               ICEsoft Technologies, Inc.
                                                            April 9, 2005


     Using the NETCONF Configuration Protocol over Secure Shell (SSH)
                      draft-ietf-netconf-ssh-04.txt

Status of this Memo

    This document is an Internet-Draft and is subject to all provisions
    of Section 3 of RFC 3667.  By submitting this Internet-Draft, each
    author represents that any applicable patent or other IPR claims of
    which he or she is aware have been or will be disclosed, and any of
    which he or she become aware will be disclosed, in accordance with
    RFC 3668.

    Internet-Drafts are working documents of the Internet Engineering
    Task Force (IETF), its areas, and its working groups.  Note that
    other groups may also distribute working documents as Internet-
    Drafts.

    Internet-Drafts are draft documents valid for a maximum of six months
    and may be updated, replaced, or obsoleted by other documents at any
    time.  It is inappropriate to use Internet-Drafts as reference
    material or to cite them other than as "work in progress."

    The list of current Internet-Drafts can be accessed at
    http://www.ietf.org/ietf/1id-abstracts.txt.

    The list of Internet-Draft Shadow Directories can be accessed at
    http://www.ietf.org/shadow.html.

    This Internet-Draft will expire on October 11, 2005.

Copyright Notice

    Copyright (C) The Internet Society (2005).

Abstract

    This document describes a method for invoking and running the NETCONF
    configuration protocol within a Secure Shell (SSH) session as an SSH
    subsystem.





Wasserman & Goddard     Expires October 11, 2005                [Page 1]

Internet-Draft              NETCONF over SSH                  April 2005


Table of Contents

    1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
    2.  Starting NETCONF over SSH  . . . . . . . . . . . . . . . . . .  3
      2.1   Capabilities Exchange  . . . . . . . . . . . . . . . . . .  4
    3.  Using NETCONF over SSH . . . . . . . . . . . . . . . . . . . .  5
    4.  Exiting the NETCONF Subsystem  . . . . . . . . . . . . . . . .  6
    5.  Security Considerations  . . . . . . . . . . . . . . . . . . .  6
    6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  7
    7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .  7
    8.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  8
      8.1   Normative References . . . . . . . . . . . . . . . . . . .  8
      8.2   Informative References . . . . . . . . . . . . . . . . . .  8
        Authors' Addresses . . . . . . . . . . . . . . . . . . . . . .  8
        Intellectual Property and Copyright Statements . . . . . . . . 10




































Wasserman & Goddard     Expires October 11, 2005                [Page 2]

Internet-Draft              NETCONF over SSH                  April 2005


1.  Introduction

    The NETCONF protocol [I-D.ietf-netconf-prot] is an XML-based protocol
    used to manage the configuration of networking equipment.  NETCONF is
    defined to be session-layer and transport independent, allowing
    mappings to be defined for multiple session-layer or transport
    protocols.  This document defines how NETCONF can be used within a
    Secure Shell (SSH) session, using the SSH connection protocol
    [I-D.ietf-secsh-connect] over the SSH transport protocol [I-D.ietf-
    secsh-transport].  This mapping will allow NETCONF to be executed
    from a secure shell session by a user or application.

    Throughout this document, the terms "client" and "server" are used to
    refer to the two ends of the SSH transport connection.  The client
    actively opens the SSH connection, and the server passively listens
    for the incoming SSH connection.  The terms "manager" and "agent" are
    used to refer to the two ends of the NETCONF protocol session.  The
    manager issues NETCONF RPC commands, and the agent replies to those
    commands.  When NETCONF is run over SSH using the mapping defined in
    this document, the client is always the manager, and the server is
    always the agent.

2.  Starting NETCONF over SSH

    To run NETCONF over SSH, the client will first establish an SSH
    transport connection using the SSH transport protocol, and the client
    and server will exchange keys for message integrity and encryption.
    The client will then invoke the "ssh-userauth" service to
    authenticate the user, as described in the SSH authentication
    protocol [I-D.ietf-secsh-userauth].  Once the user has been
    successfully authenticated, the client will invoke the "ssh-
    connection" service, also known as the SSH connection protocol.

    After the ssh-connection service is established, the client will open
    a channel of type "session", which will result in an SSH session.

    Once the SSH session has been established, the user (or application)
    will invoke NETCONF as an SSH subsystem called "netconf".  Running
    NETCONF as an SSH subsystem avoids the need for the script to
    recognize shell prompts or skip over extraneous information, such as
    a system message that is printed at shell start-up.

    In order to allow NETCONF traffic to be easily identified and
    filtered by firewalls and other network devices, NETCONF servers MUST
    default to providing access to the "netconf" SSH subsystem only when
    the SSH session is established using the IANA-assigned TCP port
    <TBD>.  Servers SHOULD be configurable to allow access to the netconf
    SSH subsystem over other ports.



Wasserman & Goddard     Expires October 11, 2005                [Page 3]

Internet-Draft              NETCONF over SSH                  April 2005


    A user (or application), could use the following command line to
    invoke NETCONF as an SSH subsystem on the IANA-assigned port:


    [user@client]$ ssh -s server.example.org -p <TBD> netconf


2.1  Capabilities Exchange

    The server MUST indicate its capabilities by sending an XML document
    containing a <hello> element as soon as the NETCONF session is
    established.  The user (or application) can parse this message to
    determine which NETCONF capabilities are supported by the server.

    The client must also send an XML document containing a <hello>
    element to indicate the client's capabilities to the server.  The
    document containing the <hello> element MUST be the first XML
    document that the client sends after the NETCONF session is
    established.

    The following example shows a capability exchange.  Messages sent by
    the client are marked with "C:" and message sent by the server are
    marked with "S:".


    S: <?xml version="1.0" encoding="UTF-8"?>
    S: <hello>
    S:   <capabilities>
    S:     <capability>
    S:       urn:ietf:params:xml:ns:netconf:base:1.0
    S:     </capability>
    S:     <capability>
    S:       urn:ietf:params:xml:ns:netconf:base:1.0#startup
    S:     </capability>
    S:   </capabilities>
    S:   <session-id>4<session-id>
    S: </hello>
    S: ]]>]]>

    C: <?xml version="1.0" encoding="UTF-8"?>
    C: <hello>
    C:   <capabilities>
    C:     <capability>
    C:       urn:ietf:params:xml:ns:netconf:base:1.0
    C:     </capability>
    C:   </capabilities>
    C: </hello>
    C: ]]>]]>



Wasserman & Goddard     Expires October 11, 2005                [Page 4]

Internet-Draft              NETCONF over SSH                  April 2005


    Although the example shows the server sending a <hello> message
    followed by the client's message, both sides will send the message as
    soon as the NETCONF subsystem is initialized, perhaps simultaneously.

3.  Using NETCONF over SSH

    A NETCONF over SSH session consists of the manager and agent
    exchanging complete XML documents.  Once the session has been
    established and capabilities have been exchanged, the manager will
    send complete XML documents to the server containing <rpc> elements,
    and the agent will respond with complete XML documents containing
    <rpc-reply> elements.

    As the previous example illustrates, a special character sequence,
    ]]>]]>, MUST be sent by both the client and the server after each XML
    document in the NETCONF exchange.  This character sequence cannot
    legally appear in an XML document, so it can be unambigiously used to
    indentify the end of the current document in the event of an XML
    syntax or parsing error, allowing resynchronization of the NETCONF
    exchange.

    To continue the example given above, an NETCONF over SSH session to
    retrieve a set of configuration information might look like this:


    C: <?xml version="1.0" encoding="UTF-8"?>
    C: <rpc message-id="105" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    C:   <get-config>
    C:     <source><running/></source>
    C:     <config xmlns="http://example.com/schema/1.2/config">
    C:      <users/>
    C:     </config>
    C:   </get-config>
    C: </rpc>
    C: ]]>]]>

    S: <?xml version="1.0" encoding="UTF-8"?>
    S: <rpc-reply message-id="105"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    S:   <config xmlns="http://example.com/schema/1.2/config">
    S:     <users>
    S:       <user><name>root</name><type>superuser</type></user>
    S:       <user><name>fred</name><type>admin</type></user>
    S:       <user><name>barney</name><type>admin</type></user>
    S:     </users>
    S:   </config>
    S: </rpc-reply>
    S: ]]>]]>




Wasserman & Goddard     Expires October 11, 2005                [Page 5]

Internet-Draft              NETCONF over SSH                  April 2005


4.  Exiting the NETCONF Subsystem

    Exiting NETCONF is accomplished using the <close-session> operation.
    An agent will processe RPC messages from the manager in the order in
    which the are received.  When the agent processes a <close-session>
    command, the agent shall respond, terminate the SSH session, and
    close the TCP connection.  The agent MUST NOT process any RPC
    commands received on the current session after the <close-session>
    command.

    To continue the example used in previous sections, an existing
    NETCONF subsystem session could be closed as follows:


    C: <?xml version="1.0" encoding="UTF-8"?>
    C: <rpc message-id="106" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    C:   <close-session/>
    C: </rpc>
    C: ]]>]]>

    S: <?xml version="1.0" encoding="UTF-8"?>
    S: <rpc-reply id="106" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    S:   <ok/>
    S: </rpc-reply>
    S: ]]>]]>


5.  Security Considerations

    NETCONF is used to access and modify configuration and state
    information, so the ability to access this protocol should be limited
    to users and systems that are authorized to view or modify the
    agent's configuration and state data.

    The identity of the server MUST be verified and authenticated by the
    client according to local policy before password-based authentication
    data or any configuration or state data is sent to or received from
    the server.  The identity of the client MUST also be verified and
    authenticated by the server according to local policy to ensure that
    the incoming client request is legitimate before any configuration or
    state data is sent to or received from the client.  Neither side
    should establish a NETCONF over SSH connection with an unknown,
    unexpected or incorrect identity on the opposite side.

    Configuration or state data may include sensitive information, such
    as usernames or security keys.  So, NETCONF should only be used over
    communications channels that provide strong encryption for data
    privacy.  This document defines a NETCONF over SSH mapping which



Wasserman & Goddard     Expires October 11, 2005                [Page 6]

Internet-Draft              NETCONF over SSH                  April 2005


    provides for support of strong encryption and authentication.

    If the NETCONF server provides remote shell access through insecure
    protocols, such as rsh or Telnet, care should be taken to prevent
    execution of the NETCONF program when strong user authentication or
    data privacy is not available.  Because it may be difficult or
    impossible in some operating environments to determine whether a
    shell command was accessed over a secure protocol such as SSH or an
    insecure protocol such as Telnet, it may be necessary to disable
    insecure shell access to the system to prevent insecure access to the
    NETCONF program.  Alternatively, it would be possible to disable
    NETCONF access from the command line, only allowing NETCONF to be
    accessed through invocation of the SSH "netconf" subsystem.

    This document requires that servers default to allowing access to the
    "netconf" SSH subsystem only when using a specific TCP port assigned
    by IANA for this purpose.  This will allow NETCONF over SSH traffic
    to be easily identified and filtered by firewalls and other network
    nodes.  However, it will also allow NETCONF over SSH traffic to be
    more easily identified by attackers.

    This document also recommends that servers be configurable to allow
    access to the "netconf" SSH subsystem over other ports.  Use of that
    configuration option without corresponding changes to firewall or
    network device configuration may unintentionally result in the
    ability for nodes outside of the firewall or other administrative
    boundary to gain access to "netconf" SSH subsystem.

6.  IANA Considerations

    IANA is requested to assign a TCP port number which will be the
    default port for NETCONF over SSH sessions as defined in this
    document.

7.  Acknowledgements

    This document was written using the xml2rfc tool described in RFC
    2629 [RFC2629].

    Extensive input was received from the members of the NETCONF design
    team, including: Andy Bierman, Weijing Chen, Rob Enns, Wes Hardaker,
    David Harrington, Eliot Lear, Simon Leinen, Phil Shafer, Juergen
    Schoenwaelder and Steve Waldbusser.  The following people have also
    reviewed this document and provided valuable input: Bill Sommerfeld.

8.  References





Wasserman & Goddard     Expires October 11, 2005                [Page 7]

Internet-Draft              NETCONF over SSH                  April 2005


8.1  Normative References

    [I-D.ietf-netconf-prot]
               Enns, R., "NETCONF Configuration Protocol",
               draft-ietf-netconf-prot-05 (work in progress),
               February 2005.

    [I-D.ietf-secsh-connect]
               Lonvick, C., "SSH Connection Protocol",
               draft-ietf-secsh-connect-25 (work in progress),
               March 2005.

    [I-D.ietf-secsh-transport]
               Lonvick, C., "SSH Transport Layer Protocol",
               draft-ietf-secsh-transport-24 (work in progress),
               March 2005.

    [I-D.ietf-secsh-userauth]
               Lonvick, C., "SSH Authentication Protocol",
               draft-ietf-secsh-userauth-27 (work in progress),
               March 2005.

8.2  Informative References

    [RFC0854]  Postel, J. and J. Reynolds, "Telnet Protocol
               Specification", STD 8, RFC 854, May 1983.

    [RFC2629]  Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629,
               June 1999.

    [RFC3667]  Bradner, S., "IETF Rights in Contributions", RFC 3667,
               February 2004.

    [RFC3668]  Bradner, S., "Intellectual Property Rights in IETF
               Technology", RFC 3668, February 2004.
















Wasserman & Goddard     Expires October 11, 2005                [Page 8]

Internet-Draft              NETCONF over SSH                  April 2005


Authors' Addresses

    Margaret Wasserman
    ThingMagic
    One Broadway, 5th Floor
    Cambridge, MA  02142
    USA

    Phone: +1 617 758-4177
    Email: margaret@thingmagic.com
    URI:   http://www.thingmagic.com


    Ted Goddard
    ICEsoft Technologies, Inc.
    Suite 300, 1717 10th St. NW
    Calgary, AB  T2M 4S2
    Canada

    Phone: +1 403 663-3322
    Email: ted.goddard@icesoft.com
    URI:   http://www.icesoft.com





























Wasserman & Goddard     Expires October 11, 2005                [Page 9]

Internet-Draft              NETCONF over SSH                  April 2005


Intellectual Property Statement

    The IETF takes no position regarding the validity or scope of any
    Intellectual Property Rights or other rights that might be claimed to
    pertain to the implementation or use of the technology described in
    this document or the extent to which any license under such rights
    might or might not be available; nor does it represent that it has
    made any independent effort to identify any such rights.  Information
    on the procedures with respect to rights in RFC documents can be
    found in BCP 78 and BCP 79.

    Copies of IPR disclosures made to the IETF Secretariat and any
    assurances of licenses to be made available, or the result of an
    attempt made to obtain a general license or permission for the use of
    such proprietary rights by implementers or users of this
    specification can be obtained from the IETF on-line IPR repository at
    http://www.ietf.org/ipr.

    The IETF invites any interested party to bring to its attention any
    copyrights, patents or patent applications, or other proprietary
    rights that may cover technology that may be required to implement
    this standard.  Please address the information to the IETF at
    ietf-ipr@ietf.org.


Disclaimer of Validity

    This document and the information contained herein are provided on an
    "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
    OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
    ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
    INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
    INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
    WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

    Copyright (C) The Internet Society (2005).  This document is subject
    to the rights, licenses and restrictions contained in BCP 78, and
    except as set forth therein, the authors retain all their rights.


Acknowledgment

    Funding for the RFC Editor function is currently provided by the
    Internet Society.




Wasserman & Goddard     Expires October 11, 2005               [Page 10]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/