[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 RFC 4742

Network Working Group                                       M. Wasserman
Internet-Draft                                                ThingMagic
Expires: September 7, 2006                                    T. Goddard
                                              ICEsoft Technologies, Inc.
                                                           March 6, 2006


    Using the NETCONF Configuration Protocol over Secure Shell (SSH)
                     draft-ietf-netconf-ssh-06.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 7, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This document describes a method for invoking and running the NETCONF
   protocol within a Secure Shell (SSH) session as an SSH subsystem.








Wasserman & Goddard     Expires September 7, 2006               [Page 1]

Internet-Draft              NETCONF over SSH                  March 2006


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Requirements Terminology . . . . . . . . . . . . . . . . . . .  3
   3.  Starting NETCONF over SSH  . . . . . . . . . . . . . . . . . .  3
     3.1.  Capabilities Exchange  . . . . . . . . . . . . . . . . . .  4
   4.  Using NETCONF over SSH . . . . . . . . . . . . . . . . . . . .  5
   5.  Exiting the NETCONF Subsystem  . . . . . . . . . . . . . . . .  6
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . .  7
   7.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  8
   8.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .  8
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  9
     9.1.  Normative References . . . . . . . . . . . . . . . . . . .  9
     9.2.  Informative References . . . . . . . . . . . . . . . . . .  9
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 10
   Intellectual Property and Copyright Statements . . . . . . . . . . 11



































Wasserman & Goddard     Expires September 7, 2006               [Page 2]

Internet-Draft              NETCONF over SSH                  March 2006


1.  Introduction

   The NETCONF protocol [I-D.ietf-netconf-prot] is an XML-based protocol
   used to manage the configuration of networking equipment.  NETCONF is
   defined to be session-layer and transport independent, allowing
   mappings to be defined for multiple session-layer or transport
   protocols.  This document defines how NETCONF can be used within a
   Secure Shell (SSH) session, using the SSH connection protocol
   [RFC4254] over the SSH transport protocol [RFC4253].  This mapping
   will allow NETCONF to be executed from a secure shell session by a
   user or application.

   Throughout this document, the terms "client" and "server" are used to
   refer to the two ends of the SSH transport connection.  The client
   actively opens the SSH connection, and the server passively listens
   for the incoming SSH connection.  The terms "manager" and "agent" are
   used to refer to the two ends of the NETCONF protocol session.  The
   manager issues NETCONF RPC commands, and the agent replies to those
   commands.  When NETCONF is run over SSH using the mapping defined in
   this document, the client is always the manager, and the server is
   always the agent.


2.  Requirements Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].


3.  Starting NETCONF over SSH

   To run NETCONF over SSH, the client will first establish an SSH
   transport connection using the SSH transport protocol, and the client
   and server will exchange keys for message integrity and encryption.
   The client will then invoke the "ssh-userauth" service to
   authenticate the user, as described in the SSH authentication
   protocol [RFC4252].  Once the user has been successfully
   authenticated, the client will invoke the "ssh-connection" service,
   also known as the SSH connection protocol.

   After the ssh-connection service is established, the client will open
   a channel of type "session", which will result in an SSH session.

   Once the SSH session has been established, the user (or application)
   will invoke NETCONF as an SSH subsystem called "netconf".  Subsystem
   support is a feature of SSH version 2 (SSHv2) and is not included in
   SSHv1.  Running NETCONF as an SSH subsystem avoids the need for the



Wasserman & Goddard     Expires September 7, 2006               [Page 3]

Internet-Draft              NETCONF over SSH                  March 2006


   script to recognize shell prompts or skip over extraneous
   information, such as a system message that is sent at shell start-up.
   However, if a subsystem cannot be used, it should be possible for a
   client to skip over any system messages that are sent at shell
   start-up by searching for a NETCONF <hello> element.  Note that this
   may not avoid problems if system messages are recieved later in the
   session.

   In order to allow NETCONF traffic to be easily identified and
   filtered by firewalls and other network devices, NETCONF servers MUST
   default to providing access to the "netconf" SSH subsystem only when
   the SSH session is established using the IANA-assigned TCP port
   <TBD>.  Servers SHOULD be configurable to allow access to the netconf
   SSH subsystem over other ports.

   A user (or application), could use the following command line to
   invoke NETCONF as an SSH subsystem on the IANA-assigned port:


   [user@client]$ ssh -s server.example.org -p <TBD> netconf

   Note that the -s option causes the command ("netconf") to be invoked
   as an SSH subsystem.

3.1.  Capabilities Exchange

   The server MUST indicate its capabilities by sending an XML document
   containing a <hello> element as soon as the NETCONF session is
   established.  The user (or application) can parse this message to
   determine which NETCONF capabilities are supported by the server.

   The client must also send an XML document containing a <hello>
   element to indicate the client's capabilities to the server.  The
   document containing the <hello> element MUST be the first XML
   document that the client sends after the NETCONF session is
   established.

   The following example shows a capability exchange.  Messages sent by
   the client are marked with "C:" and message sent by the server are
   marked with "S:".











Wasserman & Goddard     Expires September 7, 2006               [Page 4]

Internet-Draft              NETCONF over SSH                  March 2006


   S: <?xml version="1.0" encoding="UTF-8"?>
   S: <hello>
   S:   <capabilities>
   S:     <capability>
   S:       urn:ietf:params:xml:ns:netconf:base:1.0
   S:     </capability>
   S:     <capability>
   S:       urn:ietf:params:ns:netconf:capability:startup:1.0
   S:     </capability>
   S:   </capabilities>
   S:   <session-id>4<session-id>
   S: </hello>
   S: ]]>]]>

   C: <?xml version="1.0" encoding="UTF-8"?>
   C: <hello>
   C:   <capabilities>
   C:     <capability>
   C:       urn:ietf:params:xml:ns:netconf:base:1.0
   C:     </capability>
   C:   </capabilities>
   C: </hello>
   C: ]]>]]>

   Although the example shows the server sending a <hello> message
   followed by the client's message, both sides will send the message as
   soon as the NETCONF subsystem is initialized, perhaps simultaneously.

   As the previous example illustrates, a special character sequence,
   ]]>]]>, MUST be sent by both the client and the server after each XML
   document in the NETCONF exchange.  This character sequence cannot
   legally appear in an XML document, so it can be unambigiously used to
   indentify the end of the current document, allowing resynchronization
   of the NETCONF exchange in the event of an XML syntax or parsing
   error.


4.  Using NETCONF over SSH

   A NETCONF over SSH session consists of the manager and agent
   exchanging complete XML documents.  Once the session has been
   established and capabilities have been exchanged, the manager will
   send complete XML documents to the server containing <rpc> elements,
   and the agent will respond with complete XML documents containing
   <rpc-reply> elements.

   To continue the example given above, an NETCONF over SSH session to
   retrieve a set of configuration information might look like this:



Wasserman & Goddard     Expires September 7, 2006               [Page 5]

Internet-Draft              NETCONF over SSH                  March 2006


   C: <?xml version="1.0" encoding="UTF-8"?>
   C: <rpc message-id="105"
   C: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   C:   <get-config>
   C:     <source><running/></source>
   C:     <config xmlns="http://example.com/schema/1.2/config">
   C:      <users/>
   C:     </config>
   C:   </get-config>
   C: </rpc>
   C: ]]>]]>

   S: <?xml version="1.0" encoding="UTF-8"?>
   S: <rpc-reply message-id="105"
   S: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   S:   <config xmlns="http://example.com/schema/1.2/config">
   S:     <users>
   S:       <user><name>root</name><type>superuser</type></user>
   S:       <user><name>fred</name><type>admin</type></user>
   S:       <user><name>barney</name><type>admin</type></user>
   S:     </users>
   S:   </config>
   S: </rpc-reply>
   S: ]]>]]>


5.  Exiting the NETCONF Subsystem

   Exiting NETCONF is accomplished using the <close-session> operation.
   An agent will process RPC messages from the manager in the order in
   which the are received.  When the agent processes a <close-session>
   command, the agent shall respond and terminate the SSH session.  The
   agent MUST NOT process any RPC commands received on the current
   session after the <close-session> command.

   To continue the example used in previous sections, an existing
   NETCONF subsystem session could be closed as follows:














Wasserman & Goddard     Expires September 7, 2006               [Page 6]

Internet-Draft              NETCONF over SSH                  March 2006


   C: <?xml version="1.0" encoding="UTF-8"?>
   C: <rpc message-id="106"
   C: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   C:   <close-session/>
   C: </rpc>
   C: ]]>]]>

   S: <?xml version="1.0" encoding="UTF-8"?>
   S: <rpc-reply id="106"
   S: xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   S:   <ok/>
   S: </rpc-reply>
   S: ]]>]]>


6.  Security Considerations

   NETCONF is used to access configuration and state information and to
   modify configuration information, so the ability to access this
   protocol should be limited to users and systems that are authorized
   to view the agent's configuration and state or to modify the agent's
   configuration.

   The identity of the server MUST be verified and authenticated by the
   client according to local policy before password-based authentication
   data or any configuration or state data is sent to or received from
   the server.  The identity of the client MUST also be verified and
   authenticated by the server according to local policy to ensure that
   the incoming client request is legitimate before any configuration or
   state data is sent to or received from the client.  Neither side
   should establish a NETCONF over SSH connection with an unknown,
   unexpected or incorrect identity on the opposite side.

   Configuration or state data may include sensitive information, such
   as usernames or security keys.  So, NETCONF should only be used over
   communications channels that provide strong encryption for data
   privacy.  This document defines a NETCONF over SSH mapping which
   provides for support of strong encryption and authentication.

   This document requires that servers default to allowing access to the
   "netconf" SSH subsystem only when using a specific TCP port assigned
   by IANA for this purpose.  This will allow NETCONF over SSH traffic
   to be easily identified and filtered by firewalls and other network
   nodes.  However, it will also allow NETCONF over SSH traffic to be
   more easily identified by attackers.

   This document also recommends that servers be configurable to allow
   access to the "netconf" SSH subsystem over other ports.  Use of that



Wasserman & Goddard     Expires September 7, 2006               [Page 7]

Internet-Draft              NETCONF over SSH                  March 2006


   configuration option without corresponding changes to firewall or
   network device configuration may unintentionally result in the
   ability for nodes outside of the firewall or other administrative
   boundary to gain access to "netconf" SSH subsystem.


7.  IANA Considerations

   IANA is requested to assign a TCP port number which will be the
   default port for NETCONF over SSH sessions as defined in this
   document.

   IANA has assigned port <TBD> for this purpose.

   [RFC Editor: Please replace two instances of <TBD> in Section 3 and
   one instance of <TBD> in this section to the port number assigned by
   IANA.]

   IANA is also requested to assign "netconf" as an SSH Service Name as
   defined in [RFC4250], as follows:



              Service Name                  Reference
              -------------                 ---------
              netconf                       [This Document]



8.  Acknowledgements

   This document was written using the xml2rfc tool described in RFC
   2629 [RFC2629].

   Extensive input was received from the other members of the NETCONF
   design team, including: Andy Bierman, Weijing Chen, Rob Enns, Wes
   Hardaker, David Harrington, Eliot Lear, Simon Leinen, Phil Shafer,
   Juergen Schoenwaelder and Steve Waldbusser.  The following people
   have also reviewed this document and provided valuable input: Olafur
   Gudmundsson, Sam Hartman, Scott Hollenbeck, Bill Sommerfeld, Bert
   Wijnen.


9.  References







Wasserman & Goddard     Expires September 7, 2006               [Page 8]

Internet-Draft              NETCONF over SSH                  March 2006


9.1.  Normative References

   [I-D.ietf-netconf-prot]
              Enns, R., "NETCONF Configuration Protocol",
              draft-ietf-netconf-prot-11 (work in progress),
              February 2006.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC4250]  Lehtinen, S. and C. Lonvick, "The Secure Shell (SSH)
              Protocol Assigned Numbers", RFC 4250, January 2006.

   [RFC4252]  Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
              Authentication Protocol", RFC 4252, January 2006.

   [RFC4253]  Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
              Transport Layer Protocol", RFC 4253, January 2006.

   [RFC4254]  Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
              Connection Protocol", RFC 4254, January 2006.

9.2.  Informative References

   [RFC2629]  Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629,
              June 1999.

























Wasserman & Goddard     Expires September 7, 2006               [Page 9]

Internet-Draft              NETCONF over SSH                  March 2006


Authors' Addresses

   Margaret Wasserman
   ThingMagic
   One Broadway, 5th Floor
   Cambridge, MA  02142
   USA

   Phone: +1 781 405-7464
   Email: margaret@thingmagic.com
   URI:   http://www.thingmagic.com


   Ted Goddard
   ICEsoft Technologies, Inc.
   Suite 300, 1717 10th St. NW
   Calgary, AB  T2M 4S2
   Canada

   Phone: +1 403 663-3322
   Email: ted.goddard@icesoft.com
   URI:   http://www.icesoft.com





























Wasserman & Goddard     Expires September 7, 2006              [Page 10]

Internet-Draft              NETCONF over SSH                  March 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Wasserman & Goddard     Expires September 7, 2006              [Page 11]


Html markup produced by rfcmarkup 1.108, available from http://tools.ietf.org/tools/rfcmarkup/