[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-lindem-ospf-cap) 00 01 02 03 04 05 06 07 08 09 10 11 RFC 4970

Network Working Group                                      Acee Lindem
Internet Draft                                            Naiming Shen
Expiration Date: February 2005                        Redback Networks
                                                        Rahul Aggarwal
                                                      Juniper Networks
                                                         Scott Shaffer
                                                Level 3 Communications
                                                            JP Vasseur
                                                    Cisco Systems, Inc



       Extensions to OSPF for Advertising Optional Router Capabilities
                       draft-ietf-ospf-cap-03.txt


Status of this Memo


   By submitting this Internet-Draft, I certify that any applicable
   patent or IPR claims of which I am aware have been disclosed, and
   any of which I become aware will be disclosed, in accordance with
   RFC 3668.


   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.


   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as ``work in progress.''


   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt


   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.



Abstract


   It is useful for routers in an OSPF routing domain to know the
   capabilities of their neighbors and other routers in the OSPF
   routing domain.  This draft proposes extensions to OSPF for
   advertising optional router capabilities.  A new Router
   Information (RI) opaque LSA is proposed for this purpose.


Conventions used in this document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in
   this document are to be interpreted as described in RFC-2119 [3].




draft-ietf-ospf-cap-03.txt                                     [Page 1]

Internet Draft    draft-ietf-ospf-cap-03.txt                   Jul 2004




1. Motivation



   It is useful for routers in an OSPF routing domain to know the
   capabilities of their neighbors and other routers in the OSPF
   routing domain.  This can be useful for various applications:



   o In MPLS Traffic Engineering (TE), it can be used as a discovery
     mechanism [7, 8] to announce a LSR's TE capabilities like
     Path Computation Server capability (Capability of an LSR to be
     a Path Computation Server for TE LSP path computation) or the
     intention of an LSR to be part of a particular MPLS TE mesh group.



   o For network management and troubleshooting.  It gives operators a
     network wide view of OSPF capabilities on different routers.
     The presence of a capability on a given router implies
     that the software version supports the capability and the router
     is configured to support it.  On the other hand, the absence of an
     expected capability on a particular router can imply either
     misconfiguration or an incorrect software version.  Hence, this
     capability information can be used to track problems resulting from
     misconfiguration or an incorrect software version.

   OSPF uses the options field in the hello packet to advertise optional
   router capabilities [1].  However, all the bits in this field have
   been allocated and there is no way to advertise new optional
   or MPLS TE capabilities.  This document proposes extensions to OSPF
   to advertise these optional capabilities.  For existing OSPF
   capabilities, this advertisement will be used primarily for
   informational purposes.  For MPLS TE features, it is used for
   advertisement and discovery.  Future OSPF features could also
   use this mechanism for advertisement and discovery.









draft-ietf-ospf-cap-03.txt                                     [Page 2]

Internet Draft    draft-ietf-ospf-cap-03.txt                   Jul 2004




2. OSPF Router Information (RI) Opaque LSA

   OSPF routers will optionally advertise their optional capabilities
   in an area-scoped, local scope, or AS-scoped Opaque-LSA [2].
   If a router does not advertise this LSA, it does not imply that the
   router does not support one or more of the defined capabilities.
   For existing OSPF capabilities, this advertisement will be used
   primarily for informational purposes.  For MPLS TE features,
   it is used for advertisement and discovery.  Future OSPF features
   could also use this mechanism for advertisement and discovery.
   The RI opaque LSA will be originated when one of the advertised
   capabilities is configured or changed.

   The Router Information LSA will have an Opaque type of 4 and Opaque
   ID of 0.



    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |            LS age             |     Options   |  9, 10 or 11  |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |       4       |                    0                          |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                     Advertising Router                        |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                     LS sequence number                        |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |         LS checksum           |             length            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                                                               |
   +-                            TLV's                            -+
   |                             ...                               |



             Figure 2. OSPF Router Information LSA





draft-ietf-ospf-cap-03.txt                                    [Page 3]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004




    The format of the TLV's within the body of a router information LSA
    is the same as the format used by the Traffic Engineering
    Extensions to OSPF [4].  The LSA payload consists of one or
    more nested Type/Length/Value (TLV) triplets.  The format of
    each TLV is:


      0                   1                   2                   3
      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |              Type             |             Length            |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |                            Value...                           |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+



             Figure 3. TLV Format


    The Length field defines the length of the value portion in octets
    (thus a TLV with no value portion would have a length of zero).  The
    TLV is padded to four-octet alignment;  padding is not included in
    the length field (so a three octet value would have a length of
    three, but the total size of the TLV would be eight octets).  Nested
    TLV's are also 32-bit aligned.  For example, a one byte value
    would have the length field set to 1, and three bytes of padding
    would be added to the end of the value portion of the TLV.
    Unrecognized types are ignored.



2.1 OSPF Router Capabilities TLV


   The first defined TLV in the body of an RI opaque LSA is
   the Router Capabilities TLV.  A router advertising an RI opaque LSA
   SHOULD include the Router Capabilities TLV and SHOULD correctly
   identify the status of the capabilities defined in section 2.2.


   The format of the Router Capabilities TLV is as follows:


    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |              Type             |             Length            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |             Capabilities                                      |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


                Figure 4. OSPF Router Capabilities TLV






draft-ietf-ospf-cap-03.txt                                    [Page 4]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004



   Type        A 16 bit field set to 1.
   Length      A 16 bit field that indicates the length of the value
               portion in bytes.  Its set to N x 4 octets.  N starts
               from 1 and can be increased when there is a need.  Each 4
               octets are referred to as a capability flag.
   Value       This comprises one or more capability flags.  For each 4
               octets, the bits are indexed from the most significant
               to the least significant, where each bit represents one
               router capability.  When the first 32 capabilities are
               defined, a new capability flag will be used to
               accommodate the next capability.



   The Router Capabilities TLV MAY be followed by optional TLV's that
   further specify a capability.



2.2 Reserved OSPF Router Capability Bits



   The following bits in the first capability flag have been
   assigned:

   Bit       Capabilities

   0-3       Reserved
   4         OSPF graceful restart capable [5]
   5         OSPF graceful restart helper  [5]
   6         Stub Router support [6]
   7         Traffic Engineering support [4]
   8         OSPF point-to-point over LAN [9]
   9         OSPF Path Computation Server discovery [7, 8]
   10-31     Future assignments





draft-ietf-ospf-cap-03.txt                                      [Page 5]

Internet Draft    draft-ietf-ospf-cap-03.txt                    Jul 2004




2.3 Flooding Scope of the Router Information LSA



   The flooding scope for a Router Information opaque LSA is determined
   by the LSA type.  A type 9 (link-scope), type 10 (area-scoped), or a
   type 11 (AS-scoped) opaque LSA may be flooded.  If a type 11 opaque
   LSA is chosen, the originating router should also advertise type 10
   LSA(s) into any attached NSSA/stub area(s).  An OSPF router MAY
   advertise different capabilities when both NSSA/stub area type 10
   LSA(s) and an AS scoped type 11 opaque LSA is advertised.  The choice
   of flooding scope is made by the advertising router and is a matter
   of local policy.  The originating router MAY advertise multiple RI
   opaque LSAs as long as the flooding scopes differ.  TLV flooding
   scope rules will be specified on a per-TLV basis.



3. Security Consideration



   This memo does not create any new security issues for the OSPF
   protocol.  Security considerations for the base OSPF protocol are
   covered in [1].



4. Acknowledgments

   The idea for this work grew out of a conversation with Andrew Partan
   and we would like to thank him for his contribution.  The authors
   would like to thanks Peter Psenak for his review and helpful
   comments early versions of the draft.





draft-ietf-ospf-cap-03.txt                                    [Page 6]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004




5. IANA Considerations



   A new opaque LSA type will need to be assigned by IANA.
   Additionally, IANA will need to have registries for the Router
   Information opaque LSA TLV's.  The TLV assignee will be responsible
   for allocation of any sub-TLV's for the IANA assigned TLV.  All
   TLV's and sub-TLV's will be subject to OSPF WG review.



6. References



Normative References



   [1]  Coltun, R., "The OSPF Opaque LSA Option", RFC 2370, July
        1998.


   [2]  Moy, J., "OSPF Version 2", RFC 2328, April 1998.


   [3]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Level", BCP 14, RFC 2119, March 1997.

Informative References



   [4]  Katz, D., D. Yeung and K. Kompella, "Traffic Engineering
        Extensions to OSPF", RFC 3630, September 2003.


   [5]  Moy, J., P. Pillay-Esnault and A. Lindem, "OSPF Graceful
        OSPF Restart", RFC 3623, November 2003.


   [6]  Retana, A., et al, "OSPF Stub Router Advertisement",
        RFC 3137, June 2001.


   [7]  Vasseur, J., P. Psenak, "Traffic Engineering Capability TLV
        for OSPF", Internet Draft, work in progress.


   [8]  Vasseur, J., et al, "RSVP Path computation request and reply
        messages", draft-vasseur-mpls-computation-rsvp-te-03.txt,
        work in progress


   [9]  N. Shen, et al, "Point-to-point operation over LAN in
        link-state-routing protocols", Internet Draft, work in
        progress.




draft-ietf-ospf-cap-03.txt                                    [Page 7]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004




7. Author Information



Acee Lindem
Redback Networks
350 Holger Way
San Jose, CA 95134
e-mail: acee@redback.com



Naiming Shen
Redback Networks
350 Holger Way
San Jose, CA 95134
e-mail: naiming@redback.com



Rahul Aggarwal
Juniper Networks
1194 N. Mathilda Ave.
Sunnyvale, CA 94089 USA
e-mail: rahul@juniper.net



Scott Shaffer
Level 3 Communications
e-mail: scott.shaffer@level3.com



JP Vasseur
Cisco Systems, Inc.
300 Apollo Drive
Chelmsford, MA 01824
e-mail: jpv@cisco.com





draft-ietf-ospf-cap-03.txt                                    [Page 8]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004




8.  Full Copyright Statement


   Copyright (C) The Internet Society (2004). This document is subject
   to the rights, licenses and restrictions contained in BCP 78 and
   except as set forth therein, the authors retain all their rights.



   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.


   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assignees.


   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.




draft-ietf-ospf-cap-03.txt                                    [Page 9]

Internet Draft    draft-ietf-ospf-cap-03.txt                  Jul 2004





9.  Intellectual Property



   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.


   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.


   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.



10.  Acknowledgement



   Funding for the RFC Editor function is currently provided by the
   Internet Society.



draft-ietf-ospf-cap-03.txt                                    [Page 10]

Html markup produced by rfcmarkup 1.108, available from http://tools.ietf.org/tools/rfcmarkup/