[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-boucadair-pcp-description-option) 00 01 02 03 04 05 RFC 7220

PCP Working Group                                           M. Boucadair
Internet-Draft                                            France Telecom
Intended status: Standards Track                                R. Penno
Expires: November 22, 2013                                       D. Wing
                                                                   Cisco
                                                            May 21, 2013


                         PCP Description Option
                  draft-ietf-pcp-description-option-01

Abstract

   This document extends Port Control Protocol (PCP) with the ability to
   associate a description with a PCP-instantiated mapping.  It does so
   by defining a new DESCRIPTION option.

Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 22, 2013.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of



Boucadair, et al.      Expires November 22, 2013                [Page 1]

Internet-Draft           PCP Description Option                 May 2013


   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Format  . . . . . . . . . . . . . . . . . . . . . . . . . . .   2
   3.  Behavior  . . . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   4
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   5
     6.1.  Normative References  . . . . . . . . . . . . . . . . . .   5
     6.2.  Informative References  . . . . . . . . . . . . . . . . .   5
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .   5

1.  Introduction

   This document extends the base PCP [RFC6887] with the ability to
   associate a human-readable description with a PCP-instantiated
   mapping.  It does so by defining a new DESCRIPTION option.

   This PCP option can be used in both simple scenarios with a PCP
   client and PCP server, as well as in more complex scenarios where an
   interworking function is used to proxy between a UPnP IGD Control
   Point and a PCP server [I-D.ietf-pcp-upnp-igd-interworking].

   Querying the PCP server to get the description text of an existing
   mapping is out of scope.

2.  Format

   The format of the DESCRIPTION option is shown in Figure 1.

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | DESCRIPTION   |  Reserved     |           Length              |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                           Description                         |
      :                                                               :
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

        This Option:




Boucadair, et al.      Expires November 22, 2013                [Page 2]

Internet-Draft           PCP Description Option                 May 2013


         Option Name: Description Option (DESCRIPTION)
         Number: <to be assigned in the optional-to-process range>
         Purpose: Used to associate a text description with a mapping
         Valid for Opcodes: MAP, PEER
         Length: Variable
         May appear in: request. May appear in response only if it
                        appeared in the associated request.
         Maximum occurrences: 1


                       Figure 1: Description Option

   The Description field MUST carry UTF-8 encoded [RFC3629] description
   text.  The description text SHOULD NOT be null terminated.

   This option can be used by a user (or an application) to indicate a
   description associated with a given mapping such as "FTP server", "My
   remote access to my CP router", "Camera", "Network attached storage
   serve", etc.

3.  Behavior

   The DESCRIPTION option is optional to be supported by PCP servers and
   PCP clients.

   This option (Code TBA, Figure 1) MAY be included in a PCP MAP/PEER
   request to associate a description with the requested mapping.

   The PCP server MAY be configurable to accept the DESCRIPTION option.
   If the PCP server does not support the DESCRIPTION option or it is
   configured to ignore it, received DESCRIPTION options MUST be ignored
   by the PCP server and a DESCRIPTION option MUST NOT be included in
   the response.  The PCP server MUST store the content of the
   DESCRIPTION option only if it supports the DESCRIPTION option and if
   it is configured to accept handling DESCRIPTION options it receives.

   If the PCP client does not receive a DESCRIPTION option in a response
   to a request enclosing a DESCRIPTION option, this means the PCP
   server does not support that Option.  If the DESCRIPTION option is
   not included in the request, the PCP server MUST NOT include the
   DESCRIPTION option in the associated response.










Boucadair, et al.      Expires November 22, 2013                [Page 3]

Internet-Draft           PCP Description Option                 May 2013


   The maximum length SHOULD be configurable in the PCP server.  The
   configured maximum length MUST NOT exceed 1016 octets.  The suggested
   maximum length is 128 octets.  If a PCP client includes a DESCRIPTION
   option with a length exceeding the maximum length supported by the
   PCP server, only the portion of the Description field fitting that
   maximum length is stored by the PCP server and returned to the PCP
   client in the response.

   If the PCP server receives a DESCRIPTION option having a length which
   does not exceed the maximum value configured, the PCP server MUST
   record the complete sequence of the description text and MUST send
   back to the PCP client the same DESCRIPTION option as the one
   included in the request.  If the description text carried in the
   DESCRIPTION option is null terminated, the exact description text,
   including Null characters, MUST be returned by the PCP server.

   Invalid DESCRIPTION options (e.g., the content is not a legal UTF-8
   string) MUST be ignored by the PCP server.

   To update the description text of a mapping maintained by a PCP
   server, the PCP client generates a PCP MAP/PEER renewal request which
   includes a DESCRIPTION option carrying the new description text.
   Upon receipt of the PCP request, the PCP server proceeds to the same
   operations to validate a MAP/PEER request refreshing an existing
   mapping.  If validation checks are successfully passed, the PCP
   server replaces the old description text with the new one included in
   the DESCRIPTION option, and the PCP server returns the updated
   description text in the response, truncated (if necessary) as
   described above.

   The PCP client uses empty DESCRIPTION option (i.e., Length set to 0)
   to erase the description text associated with a mapping.  Upon
   receipt of a PCP renewal request which includes an empty DESCRIPTION
   option, the PCP server MUST clear the description text associated
   with a mapping it maintains.  When sending a successful PCP response,
   the PCP server MUST return back the empty DESCRIPTION option in the
   response to confirm the deletion of the description text is
   successfully handled.

4.  Security Considerations

   PCP-related security considerations are discussed in [RFC6887].  In
   addition, administrators of PCP servers SHOULD configure a maximum
   description length which does not lead to exhausting storage
   resources in the PCP server.

   If the PCP client and the PCP server are not under the same
   administrative entity, the DESCRIPTION option SHOULD NOT be used to



Boucadair, et al.      Expires November 22, 2013                [Page 4]

Internet-Draft           PCP Description Option                 May 2013


   leak privacy-related information (for example, see Section 3.2 of
   [RFC6462]).

   The DESCRIPTION option could be used to influence the PCP server's
   behavior.  For example, if the DESCRIPTION option contains a certain
   string the PCP server might allocate a mapping from a different IP
   address pool or might allow (or disallow) the creation of the mapping
   itself.  Such overloading of the DESCRIPTION option is out of scope
   of this document.  If future documents make use of this option to
   influence the PCP server decisions, it is the responsibility of those
   documents to elaborate on the associated security considerations.

5.  IANA Considerations

   The following PCP Option Codes are to be allocated in the optional-
   to-process range (the registry is maintained in http://www.iana.org/
   assignments/pcp-parameters/pcp-parameters.xml#option-rules):

      DESCRIPTION

6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC6887]  Wing, D., Cheshire, S., Boucadair, M., Penno, R., and P.
              Selkirk, "Port Control Protocol (PCP)", RFC 6887, April
              2013.

6.2.  Informative References

   [I-D.ietf-pcp-upnp-igd-interworking]
              Boucadair, M., Penno, R., and D. Wing, "Universal Plug and
              Play (UPnP) Internet Gateway Device (IGD)-Port Control
              Protocol (PCP) Interworking Function", draft-ietf-pcp-
              upnp-igd-interworking-10 (work in progress), April 2013.

   [RFC6462]  Cooper, A., "Report from the Internet Privacy Workshop",
              RFC 6462, January 2012.

Authors' Addresses





Boucadair, et al.      Expires November 22, 2013                [Page 5]

Internet-Draft           PCP Description Option                 May 2013


   Mohamed Boucadair
   France Telecom
   Rennes  35000
   France

   Email: mohamed.boucadair@orange.com


   Reinaldo Penno
   Cisco
   USA

   Email: repenno@cisco.com


   Dan Wing
   Cisco Systems, Inc.
   170 West Tasman Drive
   San Jose, California  95134
   USA

   Email: dwing@cisco.com




























Boucadair, et al.      Expires November 22, 2013                [Page 6]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/