[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-kucherawy-reputation-query-http) 00 01 02 03 04 05 06 07 08 09 10 11 RFC 7072

REPUTE Working Group                                       N. Borenstein
Internet-Draft                                                  Mimecast
Intended status: Standards Track                            M. Kucherawy
Expires: May 17, 2013                                  November 13, 2012


            Reputation Data Interchange using HTTP and JSON
                    draft-ietf-repute-query-http-04

Abstract

   This document defines a mechanism to conduct queries for reputation
   information using the Hypertext Transfer Protocol.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 17, 2013.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.






Borenstein & Kucherawy    Expires May 17, 2013                  [Page 1]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Terminology and Definitions . . . . . . . . . . . . . . . . . . 3
     2.1.  Key Words . . . . . . . . . . . . . . . . . . . . . . . . . 3
     2.2.  Other Definitions . . . . . . . . . . . . . . . . . . . . . 3
   3.  Description . . . . . . . . . . . . . . . . . . . . . . . . . . 3
     3.1.  Query . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
     3.2.  Response  . . . . . . . . . . . . . . . . . . . . . . . . . 5
   4.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5
   5.  Security Considerations . . . . . . . . . . . . . . . . . . . . 5
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 6
     6.1.  Normative References  . . . . . . . . . . . . . . . . . . . 6
     6.2.  Informative References  . . . . . . . . . . . . . . . . . . 6
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . . . 6
   Appendix B.  Public Discussion  . . . . . . . . . . . . . . . . . . 7
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 7


































Borenstein & Kucherawy    Expires May 17, 2013                  [Page 2]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


1.  Introduction

   This document defines a method to query a reputation data service for
   information about an entity, using the HyperText Transfer Protocol
   (HTTP) as the transport mechanism and JSON as the payload format.


2.  Terminology and Definitions

   This section defines terms used in the rest of the document.

2.1.  Key Words

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

2.2.  Other Definitions

   Other terms of importance in this document are defined in
   [I-D.REPUTE-MODEL] and [I-D.REPUTE-MEDIA-TYPE].


3.  Description

3.1.  Query

   A reputation query made via [HTTP] encodes the question being asked
   in the GET instruction of the protocol.

   The components to the question being asked comprise the following:

   o  The subject of the query;

   o  The name of the host, or the IP address, at which the reputation
      service is available;

   o  The name of the reputation application, i.e., the context within
      which the query is being made;

   o  Optionally, name(s) of the specific reputation assertions or
      attributies that are being requested.

   The name of the application, if given, MUST be one registered with
   IANA.  A server receiving a query about an unregistered application
   or one it does not explicitly support MUST return a 404 error code.

   The syntax for the [URI] portion of the query is constructed using a



Borenstein & Kucherawy    Expires May 17, 2013                  [Page 3]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


   template as per [URI-TEMPLATE].  The following variables MUST be
   available during template expansion:

   application:  The name of the application reputation in whose context
      the request is being made.

   scheme:  The transport scheme the client will be using for the query.

   service:  The hostname or IP address being queried.

   subject:  The subject of the query.

   Which scheme(s) can be used depends on how the reputation service
   provider offers its services.  Thus, the template could include a
   specific scheme as a fixed string in the template, or it might offer
   it as a variable in the template.  If it is a variable, it is up to
   the client and server to negotiate out-of-band which schemes are
   supported for client queries.  Implementers need to be aware that the
   template could include a fixed scheme not supported by the client.

   The following variables are OPTIONAL, but might be required by the
   template presented for a specific service:

   assertion:  A list of one or more specific assertions of interest to
      the client.  If absent, the server MUST infer that all available
      assertion information is being requested.

   Other required or optional query parameters might be defined by
   documents that register new response sets with IANA.  Further, other
   required or optional query parameters might be defined by specific
   reputation service providers, though these are private arrangements
   between client and server and will not be registered with IANA.

   Authentication between reputation client and server MAY be
   accomplished using query extensions, or MAY rely on the capabilities
   of the transport associated with the selected URI scheme.

   The template is retrieved by requesting the [WELL-KNOWN-URI] "repute-
   template" from the host providing reputation service using HTTP.  The
   server SHOULD return the template in a text/plain reply.  If the
   template cannot be retrieved, the reputation query SHOULD be aborted
   and/or retried at a later time.  The server responding to the
   template request SHOULD include an Expires field indicating a
   duration for which the template should be considered valid by clients
   and not re-queried.  Clients SHOULD adhere to the expiration time
   thus provided or, if none is provided, assume that the template is
   valid for no less than one day and SHOULD NOT repeat the query.




Borenstein & Kucherawy    Expires May 17, 2013                  [Page 4]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


   For example, given the following template:

   {scheme}://{service}/{application}/{subject}/{assertion}

   A query about the use of the domain "example.org" in the "email-id"
   application context to a service run at "example.com", where that
   application declares a required "subject" parameter, requesting the
   "SPAM" reputation assertion using HTTP to conduct the query with no
   specific client authentication information would be formed as
   follows:

   http://example.com/email-id/example.org/spam

   Matching of the attribute name(s) MUST be case-insensitive.

3.2.  Response

   The response is expected to be contained in a media type designed to
   deliver reputons.  An media type designed for this purpose,
   "application/reputon+json", is defined in [I-D.REPUTE-MEDIA-TYPE].


4.  IANA Considerations

   This document registers the "repute-template" well-known URI in the
   Well-Known URI registry as defined by [WELL-KNOWN-URI], as follows:

   URI suffix:  repute-template

   Change controller:  IETF

   Specification document(s):  [this document]

   Related information:  none


5.  Security Considerations

   This document defines particular uses of existing protocols for a
   specific application.  As such, it does not present new security
   considerations.

   Security considerations relevant to email and email authentication
   can be found in most of the documents listed in the References
   sections below.  Information specific to use of reputation services
   can be found in [I-D.REPUTE-CONSIDERATIONS].





Borenstein & Kucherawy    Expires May 17, 2013                  [Page 5]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


6.  References

6.1.  Normative References

   [HTTP]     Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [I-D.REPUTE-MEDIA-TYPE]
              Borenstein, N. and M. Kucherawy, "A Media Type for
              Reputation Interchange", draft-ietf-repute-media-type
              (work in progress), November 2012.

   [I-D.REPUTE-MODEL]
              Borenstein, N. and M. Kucherawy, "A Model for Reputation
              Interchange", draft-iet-repute-model (work in progress),
              November 2012.

   [KEYWORDS]
              Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [URI]      Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", RFC 3986,
              January 2005.

   [URI-TEMPLATE]
              Gregorio, J., Fielding, R., Hadley, M., Nottingham, M.,
              and D. Orchard, "URI Template", draft-gregorio-uritemplate
              (work in progress), September 2011.

   [WELL-KNOWN-URI]
              Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known
              Uniform Resource Identifiers (URIs)", RFC 5785,
              April 2010.

6.2.  Informative References

   [I-D.REPUTE-CONSIDERATIONS]
              Kucherawy, M., "Operational Considerations Regarding
              Reputation Services", draft-ietf-repute-considerations
              (work in progress), November 2012.


Appendix A.  Acknowledgements

   The authors would like to thank the following for their contributions
   to this work: Mark Nottingham, David F. Skoll, and Mykyta



Borenstein & Kucherawy    Expires May 17, 2013                  [Page 6]

Internet-Draft    Reputation Queries with HTTP and JSON    November 2012


   Yevstifeyev.


Appendix B.  Public Discussion

   Public discussion of this set of documents takes place on the
   domainrep@ietf.org mailing list.  See
   https://www.ietf.org/mailman/listinfo/domainrep.


Authors' Addresses

   Nathaniel Borenstein
   Mimecast
   203 Crescent St., Suite 303
   Waltham, MA  02453
   USA

   Phone: +1 781 996 5340
   Email: nsb@guppylake.com


   Murray S. Kucherawy
   2063 42nd Avenue
   San Francisco, CA  94116
   USA

   Email: superuser@gmail.com























Borenstein & Kucherawy    Expires May 17, 2013                  [Page 7]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/