[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-taylor-tls-srp) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 RFC 5054

Network Working Group                                          D. Taylor
Internet-Draft                                    Forge Research Pty Ltd
Expires: August 6, 2001                                 February 5, 2001


                    Using SRP for TLS Authentication
                         draft-ietf-tls-srp-00.txt

Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other documents
   at any time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on August 6, 2001.

Copyright Notice

   Copyright (C) The Internet Society (2001). All Rights Reserved.

Abstract

   This memo presents a technique for using the SRP (Secure Remote
   Password) protocol as an authentication method for the TLS
   (Transport Layer Security) protocol.












Taylor                   Expires August 6, 2001                 [Page 1]

Internet-Draft      Using SRP for TLS Authentication       February 2001


1. Introduction

   At the time of writing, TLS[1] uses public key certificiates with
   RSA/DSA digital signatures, or Kerberos, for authentication.

   These authentication methods do not seem well suited to the
   applications now being adapted to use TLS (IMAP[3], FTP[4], or
   TELNET[5], for example). Given these protocols (and others like
   them) are designed to use the user name and password method of
   authentication, being able to use user names and passwords to
   authenticate the TLS connection seems to be a useful feature.

   SRP[2] is an authentication method that allows the use of user names
   and passwords in a safe manner.

   This document describes the use of the SRP authentication method for
   TLS.


































Taylor                   Expires August 6, 2001                 [Page 2]

Internet-Draft      Using SRP for TLS Authentication       February 2001


2. SRP Authentication in TLS

2.1 Modifications to the TLS Handshake Sequence

   The SRP protocol can not be implemented using the sequence of
   handshake messages defined in [1] due to the sequence in which the
   SRP messages must be sent.

   This document proposes a new sequence of handshake messages for
   handshakes using the SRP authentication method.

2.1.1 Message Sequence

   Handshake Message Flow for SRP Authentication

          Client                                 Server
            |                                      |
       Client Hello (U) ------------------------>  |
            |  <---------------------------- Server Hello
            |  <---------------------------- Server Key Exchange (g, N, s)
       Client Key Exchange (A) ----------------->  |
            |  <---------------------------- Server Key Exchange (B)
            |  <---------------------------- Server Hello Done
       change cipher spec                          |
       Finished -------------------------------->  |
            |                                change cipher spec
            |  <---------------------------- Finished
            |                                      |

   The identifiers given after each message name refer to variables
   defined in [2] that are sent in that message.

   This new handshake sequence has a number of differences from the
   standard TLS handshake sequence:

   o  The client hello message has the user name appended to the
      message. This is allowable as stated in section 7.4.1.2 of [1].

   o  The client cannot generate its its public key (A) until after it
      has received the (g) and (N) paramters from the server, and the
      client must send its public key before it receives the servers
      public key (B) (as stated in section 3 of [2]). This means the
      client must wait for a server key exchange message containing (g)
      and (N), send a client key exchange message containing (A), and
      then wait for another server key exchange message containing (B).

   o  There is no server identification in this version of a TLS
      handshake. If an attacker gets the SRP password file, they can
      masquerade as the real system.


Taylor                   Expires August 6, 2001                 [Page 3]

Internet-Draft      Using SRP for TLS Authentication       February 2001


2.2 Changes to the Handshake Message Contents

   This section describes the changes to the TLS handshake message
   contents when SRP is being used for authentication. The details of
   the on-the-wire changes are given in Section 2.5.

2.2.1 The Client Hello Message

   The user name is appended to the standard client hello message. The
   extra data is included in the handshake message hashes.

2.2.2 The First Server Key Exchange Message

   The server key exchange message in the first round contains the
   generator (g), the prime (N), and the salt value (s) read from the
   SRP password file.

2.2.3 The Client Key Exchange Message

   The client key exchange message carries the clients public key (A),
   which is calculated using both information known locally, and
   information received in the first server key exchange message. This
   message MUST be sent between the first and second server key
   exchange messages.

2.2.4 The Second Server Key Exchange Message

   The server key exchange message in the second round contains the
   servers public key (B).

2.3 Calculating the Pre-master Secret

   The shared secret resulting from the SRP calculations (S) is used as
   the pre-master secret.

   The finished messages perform the same function as the client and
   server evidence messages specified in [2]. If either the client or
   the server calculate an incorrect value, the finished messages will
   not be understood, and the connection will be dropped as specified
   in [1].

2.4 Cipher Suite Definitions

   The following cipher suites are added by this draft. The numbers
   have been left blank until a suitable range has been selected.

      CipherSuite     TLS_SRP_WITH_3DES_EDE_CBC_SHA       = { ?,? };

      CipherSuite     TLS_SRP_WITH_RC4_128_SHA            = { ?,? };


Taylor                   Expires August 6, 2001                 [Page 4]

Internet-Draft      Using SRP for TLS Authentication       February 2001


      CipherSuite     TLS_SRP_WITH_IDEA_CBC_SHA           = { ?,? };

      CipherSuite     TLS_SRP_WITH_3DES_EDE_CBC_MD5       = { ?,? };

      CipherSuite     TLS_SRP_WITH_RC4_128_MD5            = { ?,? };

      CipherSuite     TLS_SRP_WITH_IDEA_CBC_MD5           = { ?,? };

2.5 New Message Structures

   This section shows the structure of the messages passed during a
   handshake that uses SRP for authentication. The representation
   language used is that used in [1].

   opaque Username<1..2^8-1>;

   enum { non_srp, srp } CipherSuiteType;

   struct {
      ProtocolVersion client_version;
      Random random;
      SessionID session_id;
      CipherSuite cipher_suites<2..2^16-1>;

      /* Need a better way to show the optional user_name field */
      select (CipherSuiteType) {
         case non_srp:
            CompressionMethod compression_methods<1..2^8-1>;
         case srp:
            CompressionMethod compression_methods<1..2^8-1>;
            Username user_name;   /* new entry */
      };
   } ClientHello;

   enum { rsa, diffie_hellman, srp } KeyExchangeAlgorithm;

   enum { first, second } KeyExchangeRound;

   struct {
      select (KeyExchangeRound) {
         case first:
            opaque srp_s<1..2^8-1>
            opaque srp_N<1..2^16-1>;
            opaque srp_g<1..2^16-1>;
         case second:
            opaque srp_B<1..2^16-1>;
      };
   } ServerSRPParams;     /* SRP parameters */



Taylor                   Expires August 6, 2001                 [Page 5]

Internet-Draft      Using SRP for TLS Authentication       February 2001


   struct {
      select (KeyExchangeAlgorithm) {
         case diffie_hellman:
            ServerDHParams params;
            Signature signed_params;
         case rsa:
            ServerRSAParams params;
            Signature signed_params;
         case srp:
            ServerSRPParams params;   /* new entry */
      };
   } ServerKeyExchange;

   struct {
      opaque srp_A<1..2^16-1>;
   } SRPClientEphemeralPublic;

   struct {
      select (KeyExchangeAlgorithm) {
         case rsa: EncryptedPreMasterSecret;
         case diffie_hellman: ClientDiffieHellmanPublic;
         case srp: SRPClientEphemeralPublic;   /* new entry */
      } exchange_keys;
   } ClientKeyExchange;



























Taylor                   Expires August 6, 2001                 [Page 6]

Internet-Draft      Using SRP for TLS Authentication       February 2001


3. Security Considerations

   There is no server identification in this version of a TLS
   handshake. If an attacker gets the SRP password file, they can
   masquerade as the real system.

   What are the security issues of this new handshake sequence? Are the
   SRP parameters passed in a safe order? Is it a problem having the
   username appended to the client hello message?










































Taylor                   Expires August 6, 2001                 [Page 7]

Internet-Draft      Using SRP for TLS Authentication       February 2001


References

   [1]  Dierks, T. and C. Allen, "The TLS Protocol", RFC 2246, January
        1999.

   [2]  Wu, T., "The SRP Authentication and Key Exchange System", RFC
        2945, September 2000.

   [3]  Newman, C., "Using TLS with IMAP, POP3 and ACAP", RFC 2595,
        June 1999.

   [4]  Ford-Hutchinson, P., Carpenter, M., Hudson, T., Murray, E. and
        V. Wiegand, "Securing FTP with TLS",
        draft-murray-auth-ftp-ssl-06 (work in progress), September 2000.

   [5]  Boe, M. and J. Altman, "TLS-based Telnet Security",
        draft-ietf-tn3270e-telnet-tls-05 (work in progress), October
        2000.


Author's Address

   David Taylor
   Forge Research Pty Ltd

   EMail: DavidTaylor@forge.com.au
   URI:   http://www.protekt.com/
























Taylor                   Expires August 6, 2001                 [Page 8]

Internet-Draft      Using SRP for TLS Authentication       February 2001


Full Copyright Statement

   Copyright (C) The Internet Society (2001). All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph
   are included on all such copies and derivative works. However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC editor function is currently provided by the
   Internet Society.



















Taylor                   Expires August 6, 2001                 [Page 9]


Html markup produced by rfcmarkup 1.108, available from http://tools.ietf.org/tools/rfcmarkup/