[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02

Domain Name System Operations                              W. Wijngaards
Internet-Draft                                                O. Kolkman
Intended status: Standards Track                              NLnet Labs
Expires: February 22, 2010                               August 21, 2009


                  DNSSEC Trust Anchor History Service
                draft-wijngaards-dnsop-trust-history-02

Status of This Memo

   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on February 22, 2010.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.

Abstract

   When DNS validators have trusted keys, but have been offline for a
   longer period, key rollover will fail and they are stuck with stale
   trust anchors.  History service allows validators to query for older



Wijngaards & Kolkman    Expires February 22, 2010               [Page 1]

Internet-Draft            Trust History Service              August 2009


   DNSKEY RRsets and pick up the rollover trail where they left off.

Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

1.  Introduction

   This memo defines a trust history service for DNS validators -- the
   component in a resolver that performs DNSSEC [RFC4034] validation,
   validator for short.

   A validator that has been offline or missed an (emergency) rollover
   can use this service to reconfigure themselves with the current
   trust-anchor.  Using a newly defined resource record (RR) that links
   old DNSKEYS together, the TALINK RR, a validator fetches old DNSKEY
   RRsets and checks they form a chain to the latest key (see
   Section 2).  The lists of old DNSKEYS, linked with the TALINK RRs, do
   not necessarily need to be published in the zone for which the DNSKEY
   history is being maintained but can be published in any DNS domain.
   We will call the entity that offers the trust history the History
   Provider.  The choice of the History Provider is made by the
   maintainer of the validator, possibly based on a hint provided, using
   the TALINK, by the zone owner.

   The algorithm that the validator uses to construct a history and
   reconfigure a new key is detailed in Section 3.  The algorithms for
   how providers of trust history can fetch the DNSKEY data as published
   by the zone they track, and publish those in their own domain, are
   explained in Section 4.

2.  The  TALINK Resource Record

   The DNS Resource Record type TALINK (decimal TBD) ties the elements
   of a linked list of DNSKEY RRs together.

   The rdata consists of two domain names.  The first name is the start,
   or previous name, and the other name the end or next name in the
   list.  The empty label '.' is used at the endpoints of the list.

   The presentation format is the two domain names.  The wire encoding
   is the two domain names, with no compression so the type can be
   treated according to [RFC3597].  The list is a double linked list,
   because this empowers low memory hosts to perform consistency checks.





Wijngaards & Kolkman    Expires February 22, 2010               [Page 2]

Internet-Draft            Trust History Service              August 2009


3.  Trust History Lookup

   This is the algorithm that a validator uses to detect and resolve the
   situation in which a trust-anchor is out of sync with the DNSKEYs
   published by a zone owner.  The algorithm uses the TALINK RR type
   which is used to link various old DNSKEYs as published by the History
   Provider, to arive from the outdated configured Trust Anchor to one
   that matches the current DNSKEY.  The TALINK RR type is defined in
   Section 2.

   When the algorithm below results in failure the trust history cannot
   be build and a new trust anchor will need to be re-configured using
   another mechanism.

   Step 1:  The validator performs a DNSKEY lookup to the target zone,
      which looks like any other initial DNSKEY lookup that the
      validator needs to match a trust anchor to the currently used
      DNSKEY RR set.  If the keyset verifies with the trust anchor
      currently held, the trust-anchor is not out-of sync.  Otherwise,
      store the DNSKEY RR set as result.  The algorithm will succesfully
      build a linked list to this DNSKEY RR or fail.

      All nameservers (the ones authoritative for the zone or the
      upstream resolver caches when the validator is not full resolver)
      SHOULD be checked to make sure the DNSKEY RR sets are the same.
      The results can differ if a key-rollover is in progress and not
      all nameservers are in sync yet.  This case can be detected by
      checking that the older keyset signs the newer and take the newer
      as result keyset.  The keysets are distinguished by the average
      over the middle of the inception and expiration dates of the
      signatures that are validated by the keyset itself.  Otherwise,
      the lookup fails.  If the check fails then the inconsistency may
      be the result of spoofing, or compromise of (DNS) infrastructure
      elements.

   Step 2:  Fetch the trust history list end points.  Perform a query of
      QTYPE=TALINK and QNAME being the domain name that is configured to
      be the History Provider for the particular domain you are trying
      to update the trust-anchor for.

   Step 3:  Go backwards through the trust history list as provided by
      the TALINK linked list.  Verify that the keyset validly signs the
      next keyset.  This is [RFC4034] validation, but the RRSIG
      expiration date is ignored.  [Editor note: Are we shure that there
      are no server implementations that will not serve expired RRSIG,
      are such 'smart' servers allowed by the specs?  In other words do
      we need clarification in the DNSSEC-updates document?]  Replace
      the owner domain name with the target zone name for verification.



Wijngaards & Kolkman    Expires February 22, 2010               [Page 3]

Internet-Draft            Trust History Service              August 2009


      One of the keys that signs the next keyset MUST have the SEP bit
      set.  The middle of inception and expiration date from the valid
      signature MUST be older than the signature checked last time.
      Query type TALINK to get previous and next locations.

      If all SEP keys have the REVOKE flag set at this step, and the
      keyset is signed by all SEP keys, then continue but store that the
      end result is that the trust point is deleted, see Section 5
      [RFC5011].

      If all SEP keys are of an unknown algorithm at this step, continue
      and at the next step, when you verify if the keyset signs validly:
      if false, continue with result a failure, if true, continue with
      the end result that the trust point is deleted.  Thus, the keysets
      with unknown algorithms are stepped over with an end result of
      failure because the validator cannot determine if unknown
      algorithm signatures are valid, until the oldest keyset with
      unknown algorithms is signed by a known algorithm and the result
      is set to deletion and step 3 continues to a known key.

   Step 4:  When the trust anchor currently held by the validator
      verifies the keyset, the algorithm is done.  The validator SHOULD
      store the result on stable storage.  Use the new trust anchor for
      validation (if using [RFC5011], put it in state VALID).

4.  Trust History Tracker

   External trackers can poll the target zone DNSKEY RRset regularly.
   Ignore date changes in the RRSIG.  Ignore changes to keys with no SEP
   flag.  Copy the newly polled DNSKEY RRset and RRSIGs, change the
   owner name to a new name at the history location.  Publish the new
   RRset and TALINK records to make it the last element in the list.
   Update the TALINK in the target zone that advertises the first and
   last name.

   Integrated into the rollover, the keys are stored in the history and
   the TALINK is updated when a new key is used in the rollover process.
   This gives the TALINK and new historical key time to propagate.

   The signer can support trust history.  Trust history key sets need
   only contain SEP keys.  To use older signers, move historical RRSIGs
   to another file.  Sign the zone, including the TALINK and DNSKEY
   records.  Append the historical RRSIGs to the result.  Signing the
   zone like this obviates the need for changes to signer and server
   software.






Wijngaards & Kolkman    Expires February 22, 2010               [Page 4]

Internet-Draft            Trust History Service              August 2009


5.  Example

   In this example example.com is the History Provider for example.net.
   The DNSKEY rdata and RRSIG rdata is omitted for brevity, it is a copy
   and paste of the data from example.net.

   $ORIGIN example.com.
   example.com. TALINK h0.example.com. h2.example.com.

   h0 TALINK . h1.example.com.
   h0 DNSKEY ...
   h0 RRSIG ...

   h1 TALINK h0.example.com. h2.example.com.
   h1 DNSKEY ...
   h1 RRSIG ...

   h2 TALINK h1.example.com. .
   h2 DNSKEY ...
   h2 RRSIG ...

   The example.net zone can advertise the example.com History Provider
   by providing the TALINK shown here at example.com at the apex of the
   example.net zone.  The TALINK at example.com is then not needed.

6.  Deployment

   The trust history is advertised with TALINK RRs at the zone apex.
   These represent alternative history sources, that can be searched in
   turn.  The TALINK at the zone apex contains the first and last name
   of the list of historical keys.

   The History Provider decides the oldest age keys it wants to publish,
   as operations permit.  If validators no longer have trust in the keys
   then they need no longer be published.  The oldest key entries can be
   omitted from the list to shorten it.

   The validator decides how long it trusts a key.  A recommendation
   from the zone owner can be configured for keys of that zone, or
   recommendations per algorithm and key size can be used (e.g. see
   [NIST800-57]).  If a key is older than that, trust history lookup
   fails with it.

   The history lookup can be used on its own.  Then, the trust history
   is used whenever the key rolls over and no polling is performed.  The
   time of the last successful key lookup is stored on stable storage.
   The trust history algorithm is not started unless the last successful
   key lookup was more than x time ago.  This time is suggested to be



Wijngaards & Kolkman    Expires February 22, 2010               [Page 5]

Internet-Draft            Trust History Service              August 2009


   the same has the Hold-Down timer in RFC 5011 i.e. 30 days, but can be
   signalled by the zone owner with the TTL of the TALINK RRset at the
   zone apex.  This TTL MUST be validated before it is stored for use
   later.

   If a validator is also using [RFC5011] for the target zone, then the
   trust history algorithm SHOULD only be invoked if the last [RFC5011]
   successful probe was more than 30 days ago.  If a new key has been
   announced, invoke the history if no 2 probes succeeded during the add
   hold-down time and there was no successful probe after the add hold-
   down time passed.  Therefore the time of the last successful probe
   MUST be stored on stable storage.

   For testing the potentially very infrequently used lookup, the
   following SHOULD be implemented.  For the test the lookup is
   triggered manually by allowing the system to be given a particular
   keyset with a last successful lookup date in the past, stored TALINK
   TTL and a test History Provider.  The test History Provider provides
   access to a generated back-dated test history that signs the current
   production keyset.

7.  Security Considerations

   The History Provider only provides copies of old data.  If that
   historic data is altered or withheld the lookup algorithm fails
   because of validation errors in Step 3 of the algorithm.  If the
   History provider or a Man in the Middle Adversary (MIMA) has access
   to the original private keys (through theft, cryptoanalisis, or
   otherwise), history can be altered without failure of the algorithm.
   Below we only consider MIMAs and assume the History Provider is a
   trusted party.

   Spoofing by a MIMA of data looked up in step 2 or 3, i.e. spoofing of
   TALINK and DNSKEY data, can present some alternate history.  However
   the DNSKEY RR set trusted that the history should arrive at is
   already fixed by step 1.  If an attempt is made to subvert the
   algorithm at step 2 or 3, then the result keyset can not be replaced
   by another keyset unnoticed.

   To change the keyset trusted as the outcome, the step 1 data has to
   be spoofed and the key held by the validator (or a newer historic
   key) has to be compromised.  Unless such spoof is targeted to a
   specific victim, a spoof of the step 1 result has a high visibility.
   Since most of the validators that receive the spoof have an up-to-
   date trust anchor most validators that would receive this spoof
   return validation failure for data from the zone that contains the
   DNSKEYs.  An adversary will therefore have to target the attack to
   validators that are in the process of an update.  Since validators do



Wijngaards & Kolkman    Expires February 22, 2010               [Page 6]

Internet-Draft            Trust History Service              August 2009


   not announce that they use trust history lookup until step 2
   adversaries will not be able to select the validators.

   A spoof of data in steps 2 and 3, together with a compromised (old)
   key, can result in a downgrade.  At steps 2 and 3 a faked trust point
   deletion or algorithm rollover can be inserted in a fake history.
   This avoids the high visibility of spoofing the current key (see
   previous paragraph) and downgrades to insecure.

   Finally there is the case that one of the keys published by the
   History Providers has been compromised.  Since someone spoofing at
   step 1 of the lookup algorithm and presenting some fake history to a
   compromised key, of course does not include key revocations and does
   extend the history to contain the compromised key, it therefore is
   not really useful for a History Provider to remove the key from the
   published history.  That only makes lookups fail for those validators
   who are not under attack.  Useful action would be to update
   validators using some other means.

   Rollover with [RFC5011] revokes keys after use.  If a History
   Provider is used, then such revoked keys SHOULD be used to perform
   history tracking and history lookup.

   The SEP bit is checked to make sure that control over the KSK is
   necessary to change the keyset for the target zone.

8.  IANA Considerations

   Resource record type TALINK has been defined using RFC5395 type
   expert review, it has RR type number TBD (decimal).

9.  Acknowledgments

   Thanks to the people who provided review and suggestions, Edward
   Lewis, Michael StJohns, Bert Hubert, Mark Andrews, Ted Lemon, Steve
   Crocker, Bill Manning, Eric Osterweil, Wolfgang Nagele, Alfred
   Hoenes, Olafur Gudmundsson, Roy Arends and Matthijs Mekking.

10.  References

10.1.  Informative References

   [NIST800-57]  Barker, E., Barker, W., Burr, W., Polk, W., and M.
                 Smid, "Recommendations for Key Management", NIST
                 SP 800-57, March 2007.

   [RFC5011]     StJohns, M., "Automated Updates of DNS Security
                 (DNSSEC) Trust Anchors", RFC 5011, September 2007.



Wijngaards & Kolkman    Expires February 22, 2010               [Page 7]

Internet-Draft            Trust History Service              August 2009


10.2.  Normative References

   [RFC2119]     Bradner, S., "Key words for use in RFCs to Indicate
                 Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3597]     Gustafsson, A., "Handling of Unknown DNS Resource
                 Record (RR) Types", RFC 3597, September 2003.

   [RFC4034]     Arends, R., Austein, R., Larson, M., Massey, D., and S.
                 Rose, "Resource Records for the DNS Security
                 Extensions", RFC 4034, March 2005.

Authors' Addresses

   Wouter Wijngaards
   NLnet Labs
   Science Park 140
   Amsterdam  1098 XG
   The Netherlands

   EMail: wouter@nlnetlabs.nl


   Olaf Kolkman
   NLnet Labs
   Science Park 140
   Amsterdam  1098 XG
   The Netherlands

   EMail: olaf@nlnetlabs.nl





















Wijngaards & Kolkman    Expires February 22, 2010               [Page 8]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/