[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01

INTERNET-DRAFT                           Editor: Kurt D. Zeilenga
Intended Category: Standards Track            OpenLDAP Foundation
Expires in six months                             4 November 2002
Obsoletes: RFC 2245



                         Anonymous SASL Mechanism
                    <draft-zeilenga-sasl-anon-01.txt>


Status of Memo

  This document is an Internet-Draft and is in full conformance with all
  provisions of Section 10 of RFC2026.

  This document is intended to be, after appropriate review and
  revision, submitted to the RFC Editor as a Standards Track document.
  Distribution of this memo is unlimited.  Technical discussion of this
  document will take place on the IETF SASL mailing list
  <ietf-sasl@imc.org>.  Please send editorial comments directly to the
  document editor <Kurt@OpenLDAP.org>.

  Internet-Drafts are working documents of the Internet Engineering Task
  Force (IETF), its areas, and its working groups.  Note that other
  groups may also distribute working documents as Internet-Drafts.
  Internet-Drafts are draft documents valid for a maximum of six months
  and may be updated, replaced, or obsoleted by other documents at any
  time.  It is inappropriate to use Internet-Drafts as reference
  material or to cite them other than as ``work in progress.''

  The list of current Internet-Drafts can be accessed at
  <http://www.ietf.org/ietf/1id-abstracts.txt>. The list of
  Internet-Draft Shadow Directories can be accessed at
  <http://www.ietf.org/shadow.html>.

  Copyright 2002, The Internet Society.  All Rights Reserved.

  Please see the Copyright section near the end of this document for
  more information.


Abstract

  It is common practice on the Internet to permit anonymous access to
  various services.  Traditionally, this has been done with a plain text
  password mechanism using "anonymous" as the user name and optional
  trace information, such as an email address, as the password.  As



Zeilenga                Anonymous SASL Mechanism                [Page 1]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


  plaintext login commands are not permitted in new IETF protocols, a
  new way to provide anonymous login is needed within the context of the
  Simple Authentication and Security Layer (SASL) framework.


1. Anonymous SASL mechanism

  This document defines an anonymous mechanism for the Simple
  Authentication and Security Layer ([SASL]) framework.  The name
  associated with this mechanism is "ANONYMOUS".

  This document replaces RFC 2245.  Changes since RFC 2245 are detailed
  in Appendix A.

  The mechanism consists of a single message from the client to the
  server.  The client sends optional trace information in the form of a
  string of UTF-8 [UTF8] encoded printable characters from the Universal
  Character Set ([UCS]).  The trace information should take one of three
  forms: an Internet email address, an opaque string which does not
  contain the '@' (U+0040) character and can be interpreted by the
  system administrator of the client's domain, or nothing.  For privacy
  reasons, an Internet email address should only be used with permission
  from the user.

  A server which permits anonymous access will announce support for the
  ANONYMOUS mechanism, and allow anyone to log in using that mechanism,
  usually with restricted access.

  This mechanism does not provide a security layer.

  The formal grammar for the client message using Augmented BNF [ABNF]
  follows.

      message     = [ email / token ]

      UTF1        = %x00-3F / %x41-7F ;; less '@' (U+0040)
      UTF2        = %xC0-DF 1(UTF0)
      UTF3        = %xE0-EF 2(UTF0)
      UTF4        = %xF0-F7 3(UTF0)
      UTF5        = %xF8-FB 4(UTF0)
      UTF6        = %xFC-FD 5(UTF0)
      UTF0        = %x80-BF

      TCHAR       = UTF1 / UTF2 / UTF3 / UTF3 / UTF4 / UTF5 / UTF6
                    ;; any UTF-8 encoded UCS printable character
                    ;; except '@' (U+0040)

      email       = addr-spec



Zeilenga                Anonymous SASL Mechanism                [Page 2]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


                    ;; as defined in [IMAIL], except with no free
                    ;; insertion of linear-white-space, and the
                    ;; local-part MUST either be entirely enclosed in
                    ;; quotes or entirely unquoted

      token       = 1*255TCHAR

  The following characters are considered non-printable:
      - control characters: U+0000..U+001F, U+007F..U+009F;
      - replacement character: U+FFFD; and
      - special characters and non-character: U+FEFF, U+FFFE, U+FFFF.


2. Example

  Here is a sample ANONYMOUS login between an IMAP client and server.
  In this example, "C:" and "S:" indicate lines sent by the client and
  server respectively.  If such lines are wrapped without a new "C:" or
  "S:" label, then the wrapping is for editorial clarity and is not part
  of the command.

  Note that this example uses the IMAP profile [IMAP4] of SASL.  The
  base64 encoding of challenges and responses, as well as the "+ "
  preceding the responses are part of the IMAP4 profile, not part of
  SASL itself.  Newer profiles of SASL will include the client message
  with the AUTHENTICATE command itself so the extra round trip below
  (the server response with an empty "+ ") can be eliminated.

  In this example, the user's opaque identification token is "sirhc".

      S: * OK IMAP4 server ready
      C: A001 CAPABILITY
      S: * CAPABILITY IMAP4 IMAP4rev1 AUTH=DIGEST-MD5 AUTH=ANONYMOUS
      S: A001 OK done
      C: A002 AUTHENTICATE ANONYMOUS
      S: +
      C: c2lyaGM=
      S: A003 OK Welcome, trace information has been logged.


3. Security Considerations

  The ANONYMOUS mechanism grants access to information by anyone.  For
  this reason it should be disabled by default so the administrator can
  make an explicit decision to enable it.

  If the anonymous user has any write privileges, a denial of service
  attack is possible by filling up all available space.  This can be



Zeilenga                Anonymous SASL Mechanism                [Page 3]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


  prevented by disabling all write access by anonymous users.

  If anonymous users have read and write access to the same area, the
  server can be used as a communication mechanism to anonymously
  exchange information.  Servers which accept anonymous submissions
  should implement the common "drop box" model which forbids anonymous
  read access to the area where anonymous submissions are accepted.

  If the anonymous user can run many expensive operations (e.g., an IMAP
  SEARCH BODY command), this could enable a denial of service attack.
  Servers are encouraged to limit the number of anonymous users and
  reduce their priority or limit their resource usage.

  If there is no idle timeout for the anonymous user and there is a
  limit on the number of anonymous users, a denial of service attack is
  enabled.  Servers should implement an idle timeout for anonymous
  users.

  The trace information is not authenticated so it can be falsified.
  This can be used as an attempt to get someone else in trouble for
  access to questionable information.  Administrators trying to trace
  abuse need to realize this information may be falsified.

  A client which uses the user's correct email address as trace
  information without explicit permission may violate that user's
  privacy.  Information about who accesses an anonymous archive on a
  sensitive subject (e.g., sexual abuse) has strong privacy needs.
  Clients should not send the email address without explicit permission
  of the user and should offer the option of supplying no trace token --
  thus only exposing the source IP address and time.  Anonymous proxy
  servers could enhance this privacy, but would have to consider the
  resulting potential denial of service attacks.

  Anonymous connections are susceptible to man in the middle attacks
  which view or alter the data transferred.  Clients and servers are
  encouraged to support external integrity and encryption mechanisms.

  Protocols which fail to require an explicit anonymous login are more
  susceptible to break-ins given certain common implementation
  techniques.  Specifically, Unix servers which offer user login may
  initially start up as root and switch to the appropriate user id after
  an explicit login command.  Normally such servers refuse all data
  access commands prior to explicit login and may enter a restricted
  security environment (e.g., the Unix chroot(2) function) for anonymous
  users.  If anonymous access is not explicitly requested, the entire
  data access machinery is exposed to external security attacks without
  the chance for explicit protective measures.  Protocols which offer
  restricted data access should not allow anonymous data access without



Zeilenga                Anonymous SASL Mechanism                [Page 4]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


  an explicit login step.

  General SASL security considerations apply to this mechanism.


4. IANA Considerations

  It is requested that the SASL Mechanism registry [IANA-SASL] entry for
  the ANONYMOUS mechanism be updated to reflect that this document now
  provides its technical specification.

      To: iana@iana.org
      Subject: Updated Registration of SASL mechanism ANONYMOUS

      SASL mechanism name: ANONYMOUS
      Security considerations: See RFC XXXX.
      Published specification (optional, recommended): RFC XXXX
      Person & email address to contact for further information:
           Kurt Zeilenga <kurt@openldap.org>
           Chris Neuman <chris.newman@innosoft.com>
      Intended usage: COMMON
      Author/Change controller: IESG <iesg@ietf.org>
      Note: Updates existing entry for ANONYMOUS


5. Acknowledgement

  This document is a revision of RFC 2245 by Chris Newman.


6. Normative References

  [ABNF]      Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", RFC 2234, November 1997.

  [IMAIL]     Crocker, D., "Standard for the Format of Arpa Internet
              Text Messages", STD 11, RFC 822, August 1982.

  [SASL]      Myers, J., "Simple Authentication and Security Layer
              (SASL)", RFC 2222bis (a work in progress).

  [UCS]       Universal Multiple-Octet Coded Character Set (UCS) -
              Architecture and Basic Multilingual Plane, ISO/IEC 10646-1
              : 1993.

  [UTF-8]     Yergeau, F., "UTF-8, a transformation format of ISO
              10646", RFC 2279, January 1998.




Zeilenga                Anonymous SASL Mechanism                [Page 5]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


7. Informative References

  [IMAP4]     Crispin, M., "Internet Message Access Protocol - Version
              4rev1", RFC 2060, December 1996.

  [IANA-SASL] IANA, "SIMPLE AUTHENTICATION AND SECURITY LAYER (SASL)
              MECHANISMS", http://www.iana.org/assignments/sasl-
              mechanisms.


8. Editor's Address

  Kurt Zeilenga
  OpenLDAP Foundation

  Email: kurt@OpenLDAP.org


Appendix A.  Changes since RFC 2245

  This appendix is non-normative.

  RFC 2245 allows the client to send optional trace information in the
  form of a human readable string, but did not define the character
  encoding nor character set to be used.  This document mandates use of
  UTF-8 encoded UCS printable characters.  The grammar was updated to
  reflect this.

  Additionally, a number of editorial changes were made.


Full Copyright Statement

  Copyright 2002, The Internet Society.  All Rights Reserved.

  This document and translations of it may be copied and furnished to
  others, and derivative works that comment on or otherwise explain it
  or assist in its implementation may be prepared, copied, published and
  distributed, in whole or in part, without restriction of any kind,
  provided that the above copyright notice and this paragraph are
  included on all such copies and derivative works.  However, this
  document itself may not be modified in any way, such as by removing
  the copyright notice or references to the Internet Society or other
  Internet organizations, except as needed for the  purpose of
  developing Internet standards in which case the procedures for
  copyrights defined in the Internet Standards process must be followed,
  or as required to translate it into languages other than English.




Zeilenga                Anonymous SASL Mechanism                [Page 6]

INTERNET-DRAFT       draft-zeilenga-sasl-anon-01.txt     4 November 2002


  The limited permissions granted above are perpetual and will not be
  revoked by the Internet Society or its successors or assigns.

  This document and the information contained herein is provided on an
  "AS IS" basis and THE AUTHORS, THE INTERNET SOCIETY, AND THE INTERNET
  ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
  INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
  INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
  WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.










































Zeilenga                Anonymous SASL Mechanism                [Page 7]


Html markup produced by rfcmarkup 1.107, available from http://tools.ietf.org/tools/rfcmarkup/