Network Working GroupW. Krecicki
Intended status: Standards TrackJune 11, 2010
Expires: December 13, 2010 

Internet Message Access Protocol (IMAP) - MOVE extension


The MOVE extension of the Internet Message Access Protocol [IMAP4] (Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” March 2003.) provides a feature intended to reduce the amount of time and resources used by usual complicated methods of moving messages between mailboxes by providing the capability of directly moving messages.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on December 13, 2010.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents ( in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

1.  Conventions Used in this Document

In examples, "C:" and "S:" indicate lines sent by the client and server respectively.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [KEYWORDS] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).

2.  Introduction and Overview

Most of IMAP clients are moving messages between mailboxes by use of sequence of COPY, STORE +FLAGS (\Deleted) and EXPUNGE commands. This, though functionally equivalent to moving messages, is a lot more complicated on the server side than simple move. When moving large amounts of messages this can create unnecessary loads and delays on server side. It also prohibits user from moving a message larger than remainings of his quota.

The MOVE extension allows simple single-command moving of messages between mailboxes without creating additional unnecessary server-side loads and without requiring user consideration about his quota limits when simply moving message and not changing the overall amount of data stored in his account.

The MOVE extension is present in any IMAP server implementation which returns "MOVE" as one of the supported capabilities to the CAPABILITY command.

The MOVE extension defines one additional command which MUST be supported by server that returns supports MOVE extension.

3.  Additional commands

The following command definition is an extension to [IMAP4] (Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” March 2003.) section 6.4.

3.1.  MOVE command

    Arguments:  sequence set
                mailbox name

    Data:       untagged responses: EXPUNGE

    Result:     OK - move completed
                NO - move error: can't move those messages or to that
                BAD - command unknown or arguments invalid

The MOVE command moves messages from the currently selected mailbox to the end of the specified mailbox. Messages that are moved are expunged from selected mailbox. Any messages that are not included in the sequence set or do not exists are unaffected. All flags (including \Deleted) and message internal date are persistent through move.

If the server does not support the MOVE capability, the client should fall back to using the regular COPY, STORE, EXPUNGE sequence.

Additionally, MOVE command can be directly preceeded by UID command, the sequence set argument is then treated as unique identifiers sequence instead of message sequence numbers as defined in [IMAP4] (Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” March 2003.) paragraph 6.4.8.

Command EXPUNGE untagged responses reports that the specified message sequence number has been permanently removed from selected mailbox (and moved to specified mailbox) as defined in [IMAP4] (Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” March 2003.) paragraph 7.4.1.

    Example:    C: A003 MOVE 3000:3002 Trash
                S: * 3002 EXPUNGE
                S: * 3001 EXPUNGE
                S: * 3000 EXPUNGE
                S: A003 OK MOVE completed
                C: A004 UID MOVE 4000:* Trash
                S: * 3010 EXPUNGE
                S: * 3009 EXPUNGE
                S: * 3008 EXPUNGE
                S: A004 OK MOVE completed

4.  Response Codes

If server supports both UIDPLUS and MOVE extensions it SHOULD return COPYUID response code as a part of tagged OK response to a MOVE command, as defined in [UIDPLUS] (Crispin, M., “Internet Message Access Protocol (IMAP) - UIDPLUS extension,” December 2005.) paragraph 4.3.

5.  Formal Syntax

Formal syntax is defined using ABNF [ABNF] (Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” November 1997.), extending the ABNF rules defined in [IMAP4] (Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” March 2003.). The IMAP4 ABNF should be imported first before attempting to validate these rules.

    capability      =/ "MOVE"

    command-select  =/ move

    move            = "MOVE" SP sequence-set SP mailbox

    uid             = "UID" SP (copy / fetch / search / store / move)
                        ; Unique identifiers used instead of message
                        ; sequence numbers

6.  IANA Considerations

This document constitutes registration of the MOVE capability in the imap4-capabilities.

7. References

[ABNF] Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF,” RFC 2234, November 1997 (TXT, HTML, XML).
[IMAP4] Crispin, M., “INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1,” RFC 3501, March 2003 (TXT).
[UIDPLUS] Crispin, M., “Internet Message Access Protocol (IMAP) - UIDPLUS extension,” RFC 4315, December 2005 (TXT).
[KEYWORDS] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).

Author's Address

  Witold Krecicki
  Webstorage sp. z o.o.
  Jutrzenki 177
  Warszawa 02-231