[Docs] [txt|pdf|xml] [Tracker] [Email] [Diff1] [Diff2] [Nits] [IPR]

Versions: 00 01 02 03 04 05 06 07 08 09 10 RFC 5448

Network Working Group                                           J. Arkko
Internet-Draft                                             V. Lehtovirta
Updates: 4187 (if approved)                                     Ericsson
Intended status: Informational                                 P. Eronen
Expires: February 20, 2009                                         Nokia
                                                         August 19, 2008


 Improved Extensible Authentication Protocol Method for 3rd Generation
              Authentication and Key Agreement (EAP-AKA')
                       draft-arkko-eap-aka-kdf-01

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on February 20, 2009.

Abstract

   This specification defines a new EAP method, EAP-AKA', a small
   revision of the EAP-AKA method.  The change is a new key derivation
   function that binds the name of the access network to the keys
   derived within the method.  The new key derivation mechanism has been
   defined in 3GPP.  This specification allows its use in EAP in an
   interoperable manner.  In addition, EAP-AKA' employs a new hash
   function, SHA256.

   This specification also updates RFC 4187 EAP-AKA to add support for



Arkko, et al.           Expires February 20, 2009               [Page 1]


Internet-Draft                  EAP-AKA'                     August 2008


   preventing bidding down attacks between itself and EAP-AKA'.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Requirements language  . . . . . . . . . . . . . . . . . . . .  4
   3.  EAP-AKA' . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
     3.1.  AT_KDF_INPUT . . . . . . . . . . . . . . . . . . . . . . .  5
     3.2.  AT_KDF . . . . . . . . . . . . . . . . . . . . . . . . . .  7
     3.3.  Key Generation . . . . . . . . . . . . . . . . . . . . . .  8
     3.4.  Hash Functions . . . . . . . . . . . . . . . . . . . . . . 10
       3.4.1.  PRF' . . . . . . . . . . . . . . . . . . . . . . . . . 10
       3.4.2.  AT_MAC . . . . . . . . . . . . . . . . . . . . . . . . 11
       3.4.3.  AT_CHECKCODE . . . . . . . . . . . . . . . . . . . . . 11
   4.  Bidding Down Prevention for EAP-AKA  . . . . . . . . . . . . . 11
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 13
     5.1.  Security Properties of Binding Network Names . . . . . . . 15
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 16
   7.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . . 17
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 17
     8.1.  Normative References . . . . . . . . . . . . . . . . . . . 17
     8.2.  Informative References . . . . . . . . . . . . . . . . . . 18
   Appendix A.  Changes from RFC 4187 . . . . . . . . . . . . . . . . 18
   Appendix B.  Editor's Note: Importance of Explicit Negotiation . . 18
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 19
   Intellectual Property and Copyright Statements . . . . . . . . . . 21
























Arkko, et al.           Expires February 20, 2009               [Page 2]


Internet-Draft                  EAP-AKA'                     August 2008


1.  Introduction

   This specification defines a new Extensible Authentication Protocol
   (EAP)[RFC3748] method, EAP-AKA', a small revision of the EAP-AKA
   method originally defined in [RFC4187].  What is new in EAP-AKA' is
   that it has a new key derivation function specified in [3GPP.33.402].
   This function binds the name of the access network to the keys
   derived within the method.  This limits the effects of compromised
   nodes and keys.  This specification defines the EAP encapsulation for
   AKA when the new key derivation mechanism is in use.

   3GPP has defined a number of applications for the revised AKA
   mechanism, some based on native encapsulation of AKA over 3GPP radio
   access networks and others based on the use of EAP.

   For making the new key derivation mechanisms usable in EAP-AKA
   additional protocol mechanisms are necessary.  Given that RFC 4187
   calls for the use of CK (the encryption key) and IK (the integrity
   key) from AKA directly, existing implementations continue to use
   these.  Any change of the key derivation must be unambiguous to both
   sides in the protocol.  That is, it must not be possible to
   accidentally connect old equipment to new equipment and get the key
   derivation wrong or attempt to use wrong keys without getting a
   proper error message.

   This specification therefore introduces a variant of the EAP-AKA
   method, called EAP-AKA'.  This method can employ the derived keys CK'
   and IK' from the 3GPP specification and updates the used hash
   function to SHA256.  But it is otherwise equivalent to RFC 4187.
   Given that a different EAP method Type value is used for EAP-AKA and
   EAP-AKA', a mutually supported method may be negotiated using the
   standard mechanisms in EAP [RFC3748].

      Editor's Note: A number of other possible ways to use the new key
      derivation functions have been proposed.  These include
      configuration and reliance on a particular domain employing only
      the new functions.  Appendix B explains why these approaches lead
      to severe interoperability problems and why it is important to be
      explicit about the change of semantics in protocol design.  RFC
      Editor: Please delete this and other Editor's Notes upon
      publication of this specification as an RFC.

   The rest of this specification is structured as follows.  Section 3
   defines the EAP-AKA' method.  Section 4 adds support to EAP-AKA to
   prevent bidding down attacks from EAP-AKA'.  Section 5 explains the
   security differences between EAP-AKA and EAP-AKA'.  Section 6
   describes the IANA considerations and Appendix A explains what
   updates to RFC 4187 EAP-AKA have been made in this specification.



Arkko, et al.           Expires February 20, 2009               [Page 3]


Internet-Draft                  EAP-AKA'                     August 2008


2.  Requirements language

   In this document, the key words "MAY", "MUST, "MUST NOT", "OPTIONAL",
   "RECOMMENDED", "SHOULD", and "SHOULD NOT", are to be interpreted as
   described in [RFC2119].


3.  EAP-AKA'

   EAP-AKA' is a new EAP method that follows EAP-AKA specification
   [RFC4187] in all other respects except the following:

   o  It uses the Type code TBD1 BY IANA, not 23 which is used by EAP-
      AKA.

   o  It carries the AT_KDF_INPUT attribute, as defined in Section 3.1
      to ensure that both parties know the name of the access network.

   o  It calculates keys as defined in Section 3.3, not as defined in
      EAP-AKA.

   o  It employs SHA256, not SHA1.

   o  It uses the optional AT_KDF attribute as defined in Section 3.2 to
      control possible future key derivation function changes.

   Figure 1 shows an example of the authentication process.  Each
   message AKA'-Challenge and so on represents the corresponding message
   from EAP-AKA, but with EAP-AKA' Type code.  The definition of these
   messages, along with the definition of attributes AT_RAND, AT_AUTN,
   AT_MAC, and AT_RES can be found from [RFC4187].




















Arkko, et al.           Expires February 20, 2009               [Page 4]


Internet-Draft                  EAP-AKA'                     August 2008


    Peer                                                    Server
       |                      EAP-Request/Identity             |
       |<------------------------------------------------------|
       |                                                       |
       | EAP-Response/Identity                                 |
       | (Includes user's NAI)                                 |
       |------------------------------------------------------>|
       |                           +-------------------------------+
       |                           | Server determines the         |
       |                           | network name, runs AKA'       |
       |                           | algorithms generating RAND    |
       |                           | and AUTN, derives session     |
       |                           | keys from CK'/IK'. RAND and   |
       |                           | AUTN are sent as AT_RAND and  |
       |                           | AT_AUTN attributes, whereas   |
       |                           | network name is transported   |
       |                           | in AT_KDF_INPUT attribute.    |
       |                           | Session keys are used in      |
       |                           | creating the AT_MAC attribute.|
       |                           +-------------------------------+
       |                        EAP-Request/AKA'-Challenge     |
       |               (AT_RAND, AT_AUTN, AT_KDF_INPUT, AT_MAC)|
       |<------------------------------------------------------|
   +--------------------------------------+                    |
   | Peer verifies the network name from  |                    |
   | AT_KDF_INPUT, and uses it in running |                    |
   | the AKA' algorithms, verifying AUTN  |                    |
   | and generating RES. The peer also    |                    |
   | derives session keys from CK'/IK'.   |                    |
   | AT_RES and AT_MAC are constructed.   |                    |
   +--------------------------------------+                    |
       | EAP-Response/AKA'-Challenge                           |
       | (AT_RES, AT_MAC)                                      |
       |------------------------------------------------------>|
       |                          +--------------------------------+
       |                          | Server checks the given AT_RES,|
       |                          | and MAC and finds them correct.|
       |                          +--------------------------------+
       |                                          EAP-Success  |
       |<------------------------------------------------------|

              Figure 1: EAP-AKA' Authentication Process

3.1.  AT_KDF_INPUT

   The format of the AT_KDF_INPUT attribute is shown below.





Arkko, et al.           Expires February 20, 2009               [Page 5]


Internet-Draft                  EAP-AKA'                     August 2008


       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | AT_KDF_INPUT  | Length        | Actual Network Name Length    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      .                        Network Name                           .
      .                                                               .
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


   The fields are as follows:

   AT_KDF_INPUT

      This is set to TBD2 BY IANA.

   Length

      The length of the attribute, calculated as defined in [RFC4187]
      Section 8.1.

   Actual Network Name Length

      This a 2-byte actual length field, needed due to the requirement
      that previous field is expressed in multiples of 4 bytes per the
      usual EAP-SIM and EAP rules.  The Actual Network Name Length field
      provides the length of the Network Name in bytes.

   Network Name

      This field contains the network name of the access network for
      which the authentication is being performed.  The name does not
      include any terminating null characters.  Because the length of
      the entire attribute must be a multiple of 4 bytes, the sender
      pads the name with zero bytes when necessary.

   Only the server sends the AT_KDF_INPUT attribute.  The peer SHOULD
   check the received value against its own understanding of the network
   name.  Upon detecting a discrepancy, the peer either logs an error
   and continues, or fails the authentication process.  More
   specifically, the peer SHOULD have a configurable policy which it can
   follow under these circumstances.  If the policy indicates that it
   can continue, the peer SHOULD display an error message to the user or
   log an error.  The peer MUST then use the network name as received in
   the AT_KDF_INPUT attribute and continue the execution of the EAP-AKA'
   according to this specification.  If the policy indicates that the



Arkko, et al.           Expires February 20, 2009               [Page 6]


Internet-Draft                  EAP-AKA'                     August 2008


   authentication should fail, the peer behaves as if AUTN had been
   incorrect and authentication fails.  See Section 3 and Figure 3 of
   [RFC4187] for an overview of how authentication failures are handled.

   The Network Name field contains an octet string.  This string MUST be
   constructed as specified in [3GPP.23.003].  This is done in a manner
   that is specific to a particular access technology.  For access
   technologies where the above reference does not provide an
   instruction on how to construct the name, the empty octet string
   SHOULD be used.

      Editor's Note: This 3GPP specification is still being worked on.
      It is assumed that the specification ensures that conflicts
      potentially arising from using the same name in different types of
      networks are avoided.  It is also assumed that the 3GPP
      specification will have detailed rules about how a client can
      determine these based on information available to the client, such
      as the type of protocol used to attach to the network, beacons
      sent out by the network, and so on.  Information that the client
      cannot directly observe (such as the type or version of the home
      network) should not be used by this algorithm.

   The AT_KDF_INPUT attribute MUST be sent when AT_KDF attribute is not
   present or has the value 2.  Otherwise, the AT_KDF_INPUT attribute
   SHOULD NOT be sent.

3.2.  AT_KDF

   AT_KDF is an optional attribute that the server MAY use when it
   wishes to employ a specific key derivation function.  This is useful
   for future evolution of the key derivation functions.

   The format of the AT_KDF attribute is shown below.

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | AT_KDF        | Length        |    Key Derivation Function    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


   The fields are as follows:

   AT_KDF

      This is set to TBD3 BY IANA.





Arkko, et al.           Expires February 20, 2009               [Page 7]


Internet-Draft                  EAP-AKA'                     August 2008


   Length

      The length of the attribute, MUST be set to 1.

   Key Derivation Function

      An enumerated value representing the key derivation function that
      the server (or peer) wishes to use.  Value 1 represents RFC 4187
      key derivation, i.e., fallback to EAP-AKA functionality.  Value 2
      represents the default key derivation function for EAP-AKA', i.e.,
      employing CK' and IK' as defined in Section 3.3.

   Servers MAY choose to send one or more AT_KDF attributes in the EAP-
   Request/AKA'-Challenge message.  The first of these attributes
   represents the desired function and the other ones are acceptable
   alternatives, the most desired alternative being the second
   attribute.

   Upon receiving this attribute, if the peer supports and is willing to
   use the key derivation function indicated by the first attribute, the
   function is taken into use and no further action is necessary.
   However, if the peer does not support this function or is unwilling
   to use it, it responds with the EAP-Response/AKA'-Challenge message
   that contains only one attribute, AT_KDF with the value set to the
   selected alternative.  If there is no suitable alternative, the peer
   behaves as if AUTN had been incorrect and authentication fails (see
   Figure 3 of [RFC4187]).

   Upon receiving an EAP-Response/AKA'-Challenge with AT_KDF from the
   peer, the server checks that the alternative was in its offer.  If
   not, it behaves as if AT_MAC of the response had been incorrect and
   fails the authentication.  For an overview of the failed
   authentication process in the server side, see Section 3 and Figure 2
   in [RFC4187].  Otherwise, the server re-sends the EAP-Response/
   AKA'-Challenge message, but moves the selected alternative to the
   beginning of the list of AT_KDF attributes.

   When the peer receives the new EAP-Request/AKA'-Challenge message, it
   MUST check that requested change, and only the requested change
   occurred in the list of AT_KDF attributes.  If yes, it continues.  If
   not, it behaves as if AT_MAC had been incorrect and fails the
   authentication.

3.3.  Key Generation

   Both the peer and server MUST derive the keys as follows.





Arkko, et al.           Expires February 20, 2009               [Page 8]


Internet-Draft                  EAP-AKA'                     August 2008


   AT_KDF set to 1

      The Master Key (MK) is generated as defined in [RFC4187].
      Similarly, if fast re-authentication is employed, [RFC4187]
      procedures for generating the relevant keys are followed.

      There are no restrictions on how the parameters of the AKA
      algorithm are selected.  In particular, implementations MAY set
      the so called AMF separation bit to either 0 or 1 in the AKA
      algorithm.  The specification of this bit can be found from Annex
      H in [3GPP.33.102].  Even if 1, this bit MUST NOT change the key
      derivation procedures when AT_KDF is set to 1.  The same rules
      apply even to the EAP-AKA method; the new key derivation
      procedures MUST NOT be applied.

   AT_KDF not present or set to 2

      In this case the needed keys are derived directly, without going
      through the intermediate step of generating an MK:


       K_encr|K_aut|K_re|MSK|EMSK =
         PRF'(IK'|CK',"EAP-AKA'"|Identity)[0..1663]

      Here [n..m] denotes the substring from bit n to m.  PRF' is a new
      pseudo random function specified in Section 3.4.  The 1664 first
      bits from its output are used for K_encr (encryption key, 128
      bits), K_aut (authentication key, 256 bits), K_re (re-
      authentication key, 256 bits), MSK (Master Session Key, 512 bits)
      and EMSK (Extended Master Session Key, 512 bits).  These keys are
      used by the subsequent EAP-AKA' process.  K_encr is used by the
      AT_ENCR_DATA attribute, and K_aut by the AT_MAC attribute.  K_re
      is used later in this section.  MSK and EMSK are outputs from a
      successful EAP method run.

      IK' and CK' are derived as specified in [3GPP.33.402].  The
      functions that derive IK' and CK' take the following parameters:
      CK and IK produced by the AKA algorithm, and value of the Network
      Name field (without length or padding) from AT_KDF_INPUT.
      Identity is the peer identity as specified in Section 7 of
      [RFC4187].

      When the server creates an AKA challenge and corresponding AUTN,
      CK, CK', IK, and IK' values it MUST set the AMF separation bit to
      1 in the AKA algorithm [3GPP.33.102].  Similarly, the peer MUST
      check that the AMF separation bit set is to 1.  If the bit is not
      set to 1, the peer behaves as if the AUTN had been incorrect and
      fails the authentication.



Arkko, et al.           Expires February 20, 2009               [Page 9]


Internet-Draft                  EAP-AKA'                     August 2008


      On fast re-authentication, the following keys are calculated:


       MSK|EMSK =
         PRF'(K_re,"EAP-AKA' re-auth"|Identity|counter|NONCE_S)[0..1023]


      MSK and EMSK are the resulting 512 bit keys, taking the first 1024
      bits from the result of PRF'.  Note that K_encr and K_aut are not
      re-derived on fast re-authentication.  K_re is the re-
      authentication key from the preceding full authentication.
      Identity is the fast re-authentication identity, counter is the
      value from AT_COUNTER attribute, NONCE_S is the nonce value from
      the AT_NONCE_S attribute, all as specified in Section 7 of
      [RFC4187].  To prevent the use of compromised keys on other
      places, it is forbidden to change the network name when going from
      the full to the fast re-authentication process.  The peer SHOULD
      NOT attempt fast re-authentication when it observes a changed
      network name.  Upon seeing a re-authentication request with a
      changed network name, the server SHOULD behave as if the re-
      authentication identifer had been unrecognized and fall back to
      full authentication.

   AT_KDF is present and has any other value

      Future variations of key derivation functions may be defined, and
      they will be represented by new values of AT_KDF.  If the peer
      does not recognize the value it cannot calculate the keys and
      behaves as explained in Section 3.2.

   If the peer supports a given key derivation function but is unwilling
   to perform it for policy reasons, it refuses to calculate the keys
   and behaves as explained in Section 3.2.

3.4.  Hash Functions

   EAP-AKA' uses SHA256 [FIPS.180-2.2002], not SHA1 as in EAP-AKA.  This
   requires a change to the pseudo random function (PRF) as well as the
   AT_MAC and AT_CHECKCODE attributes.

3.4.1.  PRF'

   The PRF' construction is the same one as IKEv2 uses (see Section 2.13
   in [RFC4306]).  The function takes two arguments.  K is a 256 bit
   value and S is an octet string of arbitrary length.  PRF' is defined
   as follows:





Arkko, et al.           Expires February 20, 2009              [Page 10]


Internet-Draft                  EAP-AKA'                     August 2008


   PRF'(K,S) = T1 | T2 | T3 | T4 | ...

      where:
      T1 = HMAC_SHA256 (K, S | 0x01)
      T2 = HMAC_SHA256 (K, T1 | S | 0x02)
      T3 = HMAC_SHA256 (K, T2 | S | 0x03)
      T4 = HMAC_SHA256 (K, T3 | S | 0x04)
      ...

   PRF' produces as many bits of output as is needed.  HMAC-SHA256 is
   the application of HMAC [RFC2104] to SHA256.

3.4.2.  AT_MAC

   The AT_MAC attribute is changed as follows.  The MAC algorithm is
   HMAC-SHA256-128, a keyed hash value.  The HMAC-SHA256-128 value is
   obtained from the 32-byte HMAC-SHA256 value by truncating the output
   to 16 bytes.  Hence, the length of the MAC is 16 bytes.

   Otherwise the use of AT_MAC in EAP-AKA' follows Section 10.15 of
   [RFC4187].

3.4.3.  AT_CHECKCODE

   The AT_CHECKCODE attribute is changed as follows.  First, a 32 byte
   value is needed to accommodate a 256 bit hash output:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   | AT_CHECKCODE  | Length        |           Reserved            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                                                               |
   |                     Checkcode (0 or 32 bytes)                 |
   |                                                               |
   |                                                               |
   |                                                               |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Second, the checkcode is a hash value, calculated with SHA256
   [FIPS.180-2.2002], over the data specified in Section 10.13 of
   [RFC4187].


4.  Bidding Down Prevention for EAP-AKA

   As discussed in [RFC3748], negotiation of methods within EAP is
   insecure.  That is, a man-in-the-middle attacker may force the



Arkko, et al.           Expires February 20, 2009              [Page 11]


Internet-Draft                  EAP-AKA'                     August 2008


   endpoints to use a method that is not the strongest one they both
   support.  This is a problem, as we expect EAP-AKA and EAP-AKA' to be
   negotiated via EAP.

   In order to prevent such attacks, this specification specifies a new
   mechanism for EAP-AKA that allows the endpoints to securely discover
   the capabilities of each other.  This mechanism comes in the form of
   the AT_BIDDING attribute.  This allows both endpoints to communicate
   their desire and support for EAP-AKA' when exchanging EAP-AKA
   messages.  This attribute is not included in EAP-AKA' messages as
   defined in this RFC.  It is only included in EAP-AKA messages.  If
   during the EAP-AKA authentication process it is discovered that both
   endpoints would have been able to use EAP-AKA', the authentication
   process SHOULD be aborted, as a bidding down attack may have
   happened.

   The format of the AT_BIDDING attribute is shown below.

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | AT_BIDDING    | Length        |D|          Reserved           |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


   The fields are as follows:

   AT_BIDDING

      This is set to TBD4 BY IANA.

   Length

      The length of the attribute, MUST be set to 1.

   D

      This bit is set to 1 if the sender does support EAP-AKA', is
      willing to use it, and prefers it over EAP-AKA.  Otherwise it
      should be set to 0.

   Reserved

      This field MUST be set to zero when sent and ignored on receipt.

   The server sends this attribute in the EAP-Request/AKA-Challenge
   message.  The peer compares the received value to its own
   capabilities.  If it turns out that both the server and peer would



Arkko, et al.           Expires February 20, 2009              [Page 12]


Internet-Draft                  EAP-AKA'                     August 2008


   have been able to use EAP-AKA' and preferred it over EAP-AKA, the
   peer behaves as if AUTN had been incorrect, and fails the
   authentication (see Figure 3 of [RFC4187]).


5.  Security Considerations

   A summary of the security properties of EAP-AKA' follows.  Most of
   the security properties are unchanged from EAP-AKA.

   If AT_KDF has value 1, the security properties of EAP-AKA' are
   equivalent to those of EAP-AKA [RFC4187].  If AT_KDF is not present
   or has value 2, then the security properties are as follows:

   Protected ciphersuite negotiation

      EAP-AKA' has no ciphersuite negotiation mechanisms.  It does have
      a negotiation mechanism for selecting the key derivation
      functions.  This mechanism is secure against bidding down attacks.

   Mutual authentication

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.

   Integrity protection

      The properties of EAP-AKA' are similar to those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.  The
      only difference is that a stronger hash algorithm, SHA256 is used
      instead of SHA1.

   Replay protection

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.

   Confidentiality

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.

   Key derivation

      EAP-AKA' supports key derivation with 128-bit effective key
      strength.  The key hierarchy is specified in Section 3.3.

      The Transient EAP Keys used to protect EAP-AKA packets (K_encr,



Arkko, et al.           Expires February 20, 2009              [Page 13]


Internet-Draft                  EAP-AKA'                     August 2008


      K_aut, K_re), the MSK, and the EMSK are cryptographically
      separate.  An attacker cannot derive any non-trivial information
      about any of these keys based on the other keys.  An attacker also
      cannot calculate the pre-shared secret from IK, CK, IK', CK',
      K_encr, K_aut, K_re, MSK, or the EMSK.

      EAP-AKA' adds an additional layer of key derivation functions
      within itself to protect against the use of compromised keys.
      This is discussed further in Section 5.1.

      EAP-AKA' uses a pseudo random function modeled after the one used
      in IKEv2 [RFC4306] together with SHA256.

   Key strength

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect, as the new key derivation functions do not change the 128
      bit underlying strength of the AKA algorithms.  Refer to [RFC4187]
      Section 12 for further details.

   Dictionary attack resistance

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.

   Fast reconnect

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.  Note
      that implementations MUST prevent performing a fast reconnect
      across method types.

   Cryptographic binding

      Note that this term refers to a very specific form of binding,
      something that is performed between two layers of authentication.
      It is not the same as the binding to a particular network name.
      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect, i.e., as it is not a tunnel method this property is not
      applicable to it.  Refer to [RFC4187] Section 12 for further
      details.

   Session independence

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.





Arkko, et al.           Expires February 20, 2009              [Page 14]


Internet-Draft                  EAP-AKA'                     August 2008


   Fragmentation

      The properties of EAP-AKA' are exactly as those of EAP-AKA in this
      respect.  Refer to [RFC4187] Section 12 for further details.

   Channel binding

      EAP-AKA', like EAP-AKA, does not provide channel bindings as
      they're defined in [RFC3748] and [RFC5247].  New skippable
      attributes can be used to add channel binding support in the
      future, if required.

      However, including the network name field in the AKA' algorithms
      (which are also used for other purposes than EAP-AKA') does
      provide a form of cryptographic separation between different
      network names, which resembles channel bindings.  However, the
      network name does not typically identify the EAP (pass-through)
      authenticator.  See the following section for more discussion.

5.1.  Security Properties of Binding Network Names

   The ability of EAP-AKA' to bind the network name into the used keys
   provides some additional protection against key leakage to
   inappropriate parties.  The keys used in the protocol are specific to
   a particular network name.  If key leakage occurs due to an accident,
   node compromise, or another attack, the leaked keys are only useful
   when providing access with that name.  For instance, a malicious
   access point cannot claim to be network Y if has stolen keys from
   network X. Obviously, if an access point is compromised, the
   malicious node can still represent the compromised node.  As a
   result, neither EAP-AKA' or any other extension can prevent such
   attacks, but the binding to a particular name limits the attacker's
   choices, allows better tracking of attacks, makes it possible to
   identify compromised networks, and applies good cryptographic
   hygiene.

   In addition, authentication server MAY verify that an EAP transaction
   received from a particular network via AAA (Authentication,
   Authorization, and Accounting) protocol claims to be from the same
   network at both AAA and EAP-AKA' layers.  Where such verification is
   implemented, it becomes impossible for an access network to claim to
   the peer that it is another access network.  This prevents some
   "lying NAS" (Network Access Server) attacks.  For instance, a roaming
   partner, R, might claim that it is the home network H in an effort to
   lure peers to connect to itself.  Such an attack would be beneficial
   for the roaming partner if it can attract more users, and damaging
   for the users if their access costs in R are higher than those in
   other alternative networks, such as H.



Arkko, et al.           Expires February 20, 2009              [Page 15]


Internet-Draft                  EAP-AKA'                     August 2008


   Any attacker who gets hold of the keys CK, IK produced by the AKA
   algorithm can compute the keys CK', IK' and hence the master key MK
   according to the rules in Section 3.3.  The attacker could then act
   as a lying NAS.  In 3GPP systems in general, the keys CK and IK have
   been distributed to, for instance, nodes in visited access network
   where they may be vulnerable.  It order to mitigate this risk this
   specification mandates that the AKA algorithm must be computed with
   the AMF separation bit set to 1, and that the peer checks that this
   is indeed the case whenever it runs EAP-AKA'.  Furthermore,
   [3GPP.33.402] requires that no keys computed in this way ever leave
   the home subscriber system.

   The additional security benefits obtained from the binding depend
   obviously on the way names are assigned to different access networks.
   This is specified in [3GPP.23.003].  Ideally, the names allow
   separating each different access technology, each different access
   network, and each different NAS within a domain.  If this is not
   possible, the full benefits may not be achieved.  For instance, if
   the names identify just an access technology, use of compromised keys
   in a different technology can be prevented, but it is not possible to
   prevent their use by other domains or devices using the same
   technology.


6.  IANA Considerations

   EAP-AKA' has the EAP Type value TBD1 BY IANA.  Per [RFC3748] Section
   6.2, this allocation can be made with Designated Expert and
   Specification Required.

   EAP-AKA' shares its attribute space and message Subtypes, with EAP-
   SIM [RFC4186] and EAP-AKA [RFC4186].  No new registries are needed.

   However, a new Attribute Type value (TBD2) in the non-skippable range
   needs to be assigned for AT_KDF_INPUT (Section 3.1).

   Also, a new Attribute Type value (TBD3) in the non-skippable range
   needs to be assigned for AT_KDF (Section 3.2).  IANA also needs to
   create a namespace for EAP-AKA' KDF Type values.  The initial
   contents of this namespace are given below; new values can be created
   through Specification Required policy [RFC5226].

   Value      Description              Reference
   ---------  ----------------------   ---------------
   0          Reserved
   1          EAP-AKA with CK/IK       [this document]
   2          EAP-AKA' with CK'/IK'    [this document]
   3-65535    Unassigned



Arkko, et al.           Expires February 20, 2009              [Page 16]


Internet-Draft                  EAP-AKA'                     August 2008


   Finally, a new Attribute Type value (TBD4) in the skippable range
   needs to be assigned for AT_BIDDING (Section 4).


7.  Acknowledgments

   The authors would like to thank Guenther Horn, Joe Salowey, Mats
   Naslund, Adrian Escott, Brian Rosenberg, Ahmad Muhanna, and Stefan
   Rommer for interesting discussions in this problem space.


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2104]  Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104,
              February 1997.

   [RFC3748]  Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H.
              Levkowetz, "Extensible Authentication Protocol (EAP)",
              RFC 3748, June 2004.

   [RFC4187]  Arkko, J. and H. Haverinen, "Extensible Authentication
              Protocol Method for 3rd Generation Authentication and Key
              Agreement (EAP-AKA)", RFC 4187, January 2006.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [3GPP.23.003]
              3GPP, "3rd Generation Partnership Project; Technical
              Specification Group Core Network and Terminals; Numbering,
              addressing and identification (Release 8)", 3GPP Draft
              Technical Specification 23.003 v 8.0.0, June 2008.

   [3GPP.33.102]
              3GPP, "3rd Generation Partnership Project; Technical
              Specification Group Services and System Aspects; 3G
              Security; Security architecture (Release 8)", 3GPP Draft
              Technical Specification 33.102 v 8.0.0, June 2008.

   [3GPP.33.402]
              3GPP, "3GPP System Architecture Evolution (SAE); Security



Arkko, et al.           Expires February 20, 2009              [Page 17]


Internet-Draft                  EAP-AKA'                     August 2008


              aspects of non-3GPP accesses; Release 8", 3GPP Draft
              Technical Specification 33.402 v 8.0.0, June 2008.

   [FIPS.180-2.2002]
              National Institute of Standards and Technology, "Secure
              Hash Standard", FIPS PUB 180-2, August 2002, <http://
              csrc.nist.gov/publications/fips/fips180-2/fips180-2.pdf>.

8.2.  Informative References

   [RFC4186]  Haverinen, H. and J. Salowey, "Extensible Authentication
              Protocol Method for Global System for Mobile
              Communications (GSM) Subscriber Identity Modules (EAP-
              SIM)", RFC 4186, January 2006.

   [RFC4284]  Adrangi, F., Lortz, V., Bari, F., and P. Eronen, "Identity
              Selection Hints for the Extensible Authentication Protocol
              (EAP)", RFC 4284, January 2006.

   [RFC4306]  Kaufman, C., "Internet Key Exchange (IKEv2) Protocol",
              RFC 4306, December 2005.

   [RFC5113]  Arkko, J., Aboba, B., Korhonen, J., and F. Bari, "Network
              Discovery and Selection Problem", RFC 5113, January 2008.

   [RFC5247]  Aboba, B., Simon, D., and P. Eronen, "Extensible
              Authentication Protocol (EAP) Key Management Framework",
              RFC 5247, August 2008.


Appendix A.  Changes from RFC 4187

   The changes to RFC 4187 relate only to the bidding down prevention
   support defined Section 4.


Appendix B.  Editor's Note: Importance of Explicit Negotiation

   Choosing between the traditional and revised AKA key derivation
   functions is easy when their use is unambiguously tied to a
   particular radio access network, e.g LTE as defined by 3GPP or eHRPD
   as defined by 3GPP2.  There is no possibility for interoperability
   problems if this radio access network is always used in conjunction
   with new protocols that cannot be mixed with the old ones; clients
   will always know whether they are connecting to the old or new
   system.

   However, using the new key derivation functions over EAP introduces



Arkko, et al.           Expires February 20, 2009              [Page 18]


Internet-Draft                  EAP-AKA'                     August 2008


   several degrees of separation, making the choice of the correct key
   derivation functions much harder.  Many different types of networks
   employ EAP.  Most of these networks have no means to carry any
   information about what is expected from the authentication process.
   EAP itself is severely limited in carrying any additional
   information, as noted in [RFC4284] [RFC5113].  Even if these networks
   or EAP were extended to carry additional information, it would not
   affect millions of deployed access networks and clients attaching to
   them.

   Simply changing the key derivation functions that EAP-AKA [RFC4187]
   uses would cause interoperability problems with all of the existing
   implementations.  Perhaps it would be possible to employ strict
   separation into domain names that should be used by the new clients
   and networks.  Only these new devices would then employ the new key
   derivation mechanism.  While this can be made to work for specific
   cases, it would be an extremely brittle mechanism, ripe to result in
   problems whenever client configuration, routing of authentication
   requests, or server configuration does not match expectations.  It
   also does not help to assume that the EAP client and server are
   running a particular release of 3GPP network specifications.  Network
   vendors often provide features from the future releases early or do
   not provide all features of the current release.  And obviously,
   there are many EAP and even some EAP-AKA implementations that are not
   bundled with the 3GPP network offerings.  In general, these
   approaches are expected to lead to hard-to-diagnose problems and
   increased support calls.


Authors' Addresses

   Jari Arkko
   Ericsson
   Jorvas  02420
   Finland

   Email: jari.arkko@piuha.net


   Vesa Lehtovirta
   Ericsson
   Jorvas  02420
   Finland

   Email: vesa.lehtovirta@ericsson.com






Arkko, et al.           Expires February 20, 2009              [Page 19]


Internet-Draft                  EAP-AKA'                     August 2008


   Pasi Eronen
   Nokia Research Center
   P.O. Box 407
   FIN-00045 Nokia Group
   Finland

   Email: pasi.eronen@nokia.com












































Arkko, et al.           Expires February 20, 2009              [Page 20]


Internet-Draft                  EAP-AKA'                     August 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.











Arkko, et al.           Expires February 20, 2009              [Page 21]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/