[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 01 02 03 04

Network Working Group                                          R. Barnes
Internet-Draft                                                   Mozilla
Intended status: Standards Track                            P. Eckersley
Expires: July 28, 2015                                         S. Schoen
                                                                     EFF
                                                            A. Halderman
                                                               J. Kasten
                                                  University of Michigan
                                                        January 28, 2015


          Automatic Certificate Management Environment (ACME)
                          draft-barnes-acme-01

Abstract

   Certificates in the Web's X.509 PKI (PKIX) are used for a number of
   purposes, the most significant of which is the authentication of
   domain names.  Thus, certificate authorities in the Web PKI are
   trusted to verify that an applicant for a certificate legitimately
   represents the domain name(s) in the certificate.  Today, this
   verification is done through a collection of ad hoc mechanisms.  This
   document describes a protocol that a certificate authority (CA) and
   an applicant can use to automate the process of verification and
   certificate issuance.  The protocol also provides facilities for
   other certificate management functions, such as certificate
   revocation.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 28, 2015.







Barnes, et al.            Expires July 28, 2015                 [Page 1]


Internet-Draft                    ACME                      January 2015


Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Deployment Model and Operator Experience  . . . . . . . . . .   3
   3.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   5
   4.  Protocol Overview . . . . . . . . . . . . . . . . . . . . . .   6
   5.  Certificate Management  . . . . . . . . . . . . . . . . . . .   8
     5.1.  Resources and Requests  . . . . . . . . . . . . . . . . .   9
     5.2.  Errors  . . . . . . . . . . . . . . . . . . . . . . . . .  11
     5.3.  Registration  . . . . . . . . . . . . . . . . . . . . . .  11
     5.4.  Authorization Resources . . . . . . . . . . . . . . . . .  13
     5.5.  Key Authorization . . . . . . . . . . . . . . . . . . . .  15
       5.5.1.  Recovery Tokens . . . . . . . . . . . . . . . . . . .  19
     5.6.  Certificate Issuance  . . . . . . . . . . . . . . . . . .  20
     5.7.  Other possibilities . . . . . . . . . . . . . . . . . . .  30
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  31
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  31
   8.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  31
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  31
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  31
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  33
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  33

1.  Introduction

   Certificates in the Web PKI are most commonly used to authenticate
   domain names.  Thus, certificate authorities in the Web PKI are
   trusted to verify that an applicant for a certificate legitimately
   represents the domain name(s) in the certificate.

   Existing Web PKI certificate authorities tend to run on a set of ad
   hoc protocols for certificate issuance and identity verification.  A
   typical user experience is something like:



Barnes, et al.            Expires July 28, 2015                 [Page 2]


Internet-Draft                    ACME                      January 2015


   o  Generate a PKCS#10 [RFC2314] Certificate Signing Request (CSR).

   o  Cut-and-paste the CSR into a CA web page.

   o  Prove ownership of the domain by one of the following methods:

      *  Put a CA-provided challenge at a specific place on the web
         server.

      *  Put a CA-provided challenge at a DNS location corresponding to
         the target domain.

      *  Receive CA challenge at a (hopefully) administrator-controlled
         e-mail address corresponding to the domain and then respond to
         it on the CA's web page.

   o  Download the issued certificate and install it on their Web
      Server.

   With the exception of the CSR itself and the certificates that are
   issued, these are all completely ad hoc procedures and are
   accomplished by getting the human user to follow interactive natural-
   language instructions from the CA rather than by machine-implemented
   published protocols.  In many cases, the instructions are difficult
   to follow and cause significant confusion.  Informal usability tests
   by the authors indicate that webmasters often need 1-3 hours to
   obtain and install a certificate for a domain.  Even in the best
   case, the lack of published, standardized mechanisms presents an
   obstacle to the wide deployment of HTTPS and other PKIX-dependent
   systems because it inhibits mechanization of tasks related to
   certificate issuance, deployment, and revocation.

   This document describes an extensible framework for automating the
   issuance and domain validation procedure, thereby allowing servers
   and infrastructural software to obtain certificates without user
   interaction.  Use of this protocol should radically simplify the
   deployment of HTTPS and the practicality of PKIX authentication for
   other TLS based protocols.

2.  Deployment Model and Operator Experience

   The major guiding use case for ACME is obtaining certificates for Web
   sites (HTTPS [RFC2818]).  In that case, the server is intended to
   speak for one or more domains, and the process of certificate
   issuance is intended to verify that the server actually speaks for
   the domain.





Barnes, et al.            Expires July 28, 2015                 [Page 3]


Internet-Draft                    ACME                      January 2015


   Different types of certificates reflect different kinds of CA
   verification of information about the certificate subject.  "Domain
   Validation" (DV) certificates are by far the most common type.  For
   DV validation, the CA merely verifies that the requester has
   effective control of the web server and/or DNS server for the domain,
   but does not explicitly attempt to verify their real-world identity.
   (This is as opposed to "Organization Validation" (OV) and "Extended
   Validation" (EV) certificates, where the process is intended to also
   verify the real-world identity of the requester.)

   DV certificate validation commonly checks claims about properties
   related to control of a domain name - properties that can be observed
   by the issuing authority in an interactive process that can be
   conducted purely online.  That means that under typical
   circumstances, all steps in the request, verification, and issuance
   process can be represented and performed by Internet protocols with
   no out-of-band human intervention.

   When an operator deploys a current HTTPS server, it generally prompts
   him to generate a self-signed certificate.  When an operator deploys
   an ACME-compatible web server, the experience would be something like
   this:

   o  The ACME client prompts the operator for the intended domain
      name(s) that the web server is to stand for.

   o  The ACME client presents the operator with a list of CAs from
      which it could get a certificate.
      (This list will change over time based on the capabilities of CAs
      and updates to ACME configuration.)  The ACME client might prompt
      the operator for payment information at this point.

   o  The operator selects a CA.

   o  In the background, the ACME client contacts the CA and requests
      that a certificate be issued for the intended domain name(s).

   o  Once the CA is satisfied, the certificate is issued and the ACME
      client automatically downloads and installs it, potentially
      notifying the operator via e-mail, SMS, etc.

   o  The ACME client periodically contacts the CA to get updated
      certificates, stapled OCSP responses, or whatever else would be
      required to keep the server functional and its credentials up-to-
      date.

   The overall idea is that it's nearly as easy to deploy with a CA-
   issued certificate as a self-signed certificate, and that once the



Barnes, et al.            Expires July 28, 2015                 [Page 4]


Internet-Draft                    ACME                      January 2015


   operator has done so, the process is self-sustaining with minimal
   manual intervention.  Close integration of ACME with HTTPS servers,
   for example, can allow the immediate and automated deployment of
   certificates as they are issued, optionally sparing the human
   administrator from additional configuration work.

3.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

   The two main roles in ACME are "client" and "server".  The ACME
   client uses the protocol to request certificate management actions,
   such as issuance or revocation.  An ACME client therefore typically
   runs on a web server, mail server, or some other server system which
   requires valid TLS certificates.  The ACME server runs at a
   certificate authority, and responds to client requests, performing
   the requested actions if the client is authorized.

   For simplicity, in the HTTPS transactions used by ACME, the ACME
   client is the HTTPS client and the ACME server is the HTTPS server.

   In the discussion below, we will refer to three different types of
   keys / key pairs:

   Subject Public Key:  A public key to be included in a certificate.

   Account Key Pair:  A key pair for which the ACME server considers the
      holder of the private key authorized to manage certificates for a
      given identifier.  The same key pair may be authorized for
      multiple identifiers.

   Recovery Token:  A secret value that can be used to demonstrate prior
      authorization for an identifier, in a situation where all Subject
      Private Keys and Account Keys are lost.

   ACME messaging is based on HTTPS [RFC2818] and JSON [RFC7159].  Since
   JSON is a text-based format, binary fields are Base64-encoded.  For
   Base64 encoding, we use the variant defined in
   [I-D.ietf-jose-json-web-signature].  The important features of this
   encoding are (1) that it uses the URL-safe character set, and (2)
   that "=" padding characters are stripped.

   Some HTTPS bodies in ACME are authenticated and integrity-protected
   by being encapsulated in a JSON Web Signature (JWS) object
   [I-D.ietf-jose-json-web-signature].  ACME uses a profile of JWS, with
   the following restrictions:



Barnes, et al.            Expires July 28, 2015                 [Page 5]


Internet-Draft                    ACME                      January 2015


   o  The JWS MUST use the JSON or Flattened JSON Serialization

   o  If the JWS is in the JSON Serialization, it MUST NOT include more
      than one signature in the "signatures" array

   o  The JWS Header MUST include "alg" and "jwk" fields

4.  Protocol Overview

   ACME allows a client to request certificate management actions using
   a set of JSON messages carried over HTTPS.  In some ways, ACME
   functions much like a traditional CA, in which a user creates an
   account, adds identifiers to that account (proving control of the
   domains), and requests certificate issuance for those domains while
   logged in to the account.

   In ACME, the account is represented by a account key pair.  The "add
   a domain" function is accomplished by authorizing the key pair for a
   given domain.  Certificate issuance and revocation are authorized by
   a signature with the key pair.

   The first phase of ACME is for the client to register with the ACME
   server.  The client generates an asymmetric key pair and associates
   this key pair with a set of contact information by signing the
   contact information.  The server acknowledges the registration by
   replying with a recovery token that the client can provide later to
   associate a new account key pair in the event that the first account
   key pair is lost.

         Client                                                  Server

         Contact Information
         Signature                     ------->

                                       <-------          Recovery Token


   Before a client can issue certificates, it must establish an
   authorization with the server for an account key pair to act for the
   identifier(s) that it wishes to include in the certificate.  To do
   this, the client must demonstrate to the server both (1) that it
   holds the private key of the account key pair, and (2) that it has
   authority over the identifier being claimed.

   Proof of possession of the account key is built into the ACME
   protocol.  All messages from the client to the server are signed by
   the client, and the server verifies them using the public key of the
   account key pair.



Barnes, et al.            Expires July 28, 2015                 [Page 6]


Internet-Draft                    ACME                      January 2015


   To verify that the client controls the identifier being claimed, the
   server issues the client a set of challenges.  Because there are many
   different ways to validate possession of different types of
   identifiers, the server will choose from an extensible set of
   challenges that are appropriate for the identifier being claimed.
   The client responds with a set of responses that tell the server
   which challenges the client has completed.  The server then validate
   the challenges to check that the client has accomplished the
   challenge.

   For example, if the client requests a domain name, the server might
   challenge the client to provision a record in the DNS under that
   name, or to provision a file on a web server referenced by an A or
   AAAA record under that name.  The server would then query the DNS for
   the record in question, or send an HTTP request for the file.  If the
   client provisioned the DNS or the web server as expected, then the
   server considers the client authorized for the domain name.

         Client                                                  Server

         Identifier
         Signature                     ------->

                                       <-------              Challenges

         Responses
         Signature                     ------->

                                       <-------       Updated Challenge

         Poll                          ------->

                                       <-------           Authorization


   Once the client has authorized an account key pair for an identifier,
   it can use the key pair to authorize the issuance of certificates for
   the identifier.  To do this, the client sends a PKCS#10 Certificate
   Signing Request (CSR) to the server (indicating the identifier(s) to
   be included in the issued certificate), a set of links to any
   required authorizations, and a signature over the CSR by the private
   key of the account key pair.

   If the server agrees to issue the certificate, then it creates the
   certificate and provides it in its response.  The certificate is
   assigned a URI, which the client can use to fetch updated versions of
   the certificate.




Barnes, et al.            Expires July 28, 2015                 [Page 7]


Internet-Draft                    ACME                      January 2015


         Client                                                 Server

         CSR
         Authorization URI(s)
         Signature                    -------->

                                      <--------            Certificate


   To revoke a certificate, the client simply sends a revocation
   request, signed with an authorized key pair, and the server indicates
   whether the request has succeeded.

         Client                                                 Server

         Revocation request
         Signature                    -------->

                                      <--------                 Result


   Note that while ACME is defined with enough flexibility to handle
   different types of identifiers in principle, the primary use case
   addressed by this document is the case where domain names are used as
   identifiers.  For example, all of the identifier validation
   challenges described in Section {identifier-validation-challenges}
   below address validation of domain names.  The use of ACME for other
   protocols will require further specification, in order to describe
   how these identifiers are encoded in the protocol, and what types of
   validation challenges the server might require.

5.  Certificate Management

   In this section, we describe the certificate management functions
   that ACME enables:

   o  Registration

   o  Key Authorization

   o  Certificate Issuance

   o  Certificate Revocation

   Each of these functions is accomplished by the client sending a
   sequence of HTTPS requests to the server, carrying JSON messages.
   Each subsection below describes the message formats used by the
   function, and the order in which messages are sent.



Barnes, et al.            Expires July 28, 2015                 [Page 8]


Internet-Draft                    ACME                      January 2015


5.1.  Resources and Requests

   ACME is structured as a REST application with a few types of
   resources:

   o  Registration resources, representing information about an account
      key

   o  Authorization resources, representing an account key's
      authorization to act for an identifier

   o  Challenge resources, representing a challenge to prove control of
      an identifier

   o  Certificate resources, representing issued certificates

   o  A "new-registration" resource

   o  A "new-authorization" resource

   o  A "new-certificate" resource

   In general, the intent is for authorization and certificate resources
   to contain only public information, so that CAs may publish these
   resoruces to document what certificates have been issued and how they
   were authorized.  Non-public information, such as contact
   information, is stored in registration resources.

   In order to accomplish ACME transactions, a client needs to have the
   server's new-registration, new-authorization, and new-ceritificate
   URIs; the remaining URIs are provided to the client as a result of
   requests to these URIs.  To simplify configuration, ACME uses the
   "next" link relation to indicate URI to contact for the next step in
   processing: From registration to authorization, and from
   authorization to certificate issuance.  In this way, a client need
   only be configured with the registration URI.

   The "up" link relation is used with challenge resources to indicate
   the authorization resource to which a challenge belongs.  It is also
   used from certificate resources to indicate a resource from which the
   client may fetch a chain of CA certificates that could be used to
   validate the certificate in the original resource.

   The following diagram illustrates the relations between resources on
   an ACME server.  The solid lines indicate link relations, and the
   dotted lines correspond to relationships expressed in other ways,
   e.g., the Location header in a 201 (Created) response.




Barnes, et al.            Expires July 28, 2015                 [Page 9]


Internet-Draft                    ACME                      January 2015


                "next"              "next"
       new-reg ---+----> new-authz ---+----> new-cert    cert-chain
          .       |          .        |         .            ^
          .       |          .        |         .            | "up"
          V       |          V        |         V            |
         reg* ----+        authz -----+       cert-----------+
                            . ^
                            . | "up"
                            V |
                          challenge


   The remainder of this section provides the details of how these
   resources are structured and how the ACME protocol makes use of them.

   All ACME requests with a non-empty body MUST encapsulate the body in
   a JWS object, signed using the account key pair.  The server MUST
   verify the JWS before processing the request.  (For readability,
   however, the examples below omit this encapsulation.)  Encapsulating
   request bodies in JWS provides a simple authentication of requests by
   way of key continuity.

   Note that this implies that GET requests are not authenticated.
   Servers MUST NOT respond to GET requests for resources that might be
   considered sensitive.

   The following table illustrates a typical sequence of requests
   required to establish a new account with the server, prove control of
   an identifier, issue a certificate, and fetch an updated certificate
   some time after issuance.  The "->" is a mnemonic for a Location
   header pointing to a created resource.

          +--------------------+----------------+--------------+
          | Action             | Request        | Response     |
          +--------------------+----------------+--------------+
          | Register           | POST new-reg   | 201 -> reg   |
          |                    |                |              |
          | Request challenges | POST new-authz | 201 -> authz |
          |                    |                |              |
          | Answer challenges  | POST challenge | 200          |
          |                    |                |              |
          | Poll for status    | GET  authz     | 200          |
          |                    |                |              |
          | Request issuane    | POST new-cert  | 201 -> cert  |
          |                    |                |              |
          | Check for new cert | GET  cert      | 200          |
          +--------------------+----------------+--------------+




Barnes, et al.            Expires July 28, 2015                [Page 10]


Internet-Draft                    ACME                      January 2015


5.2.  Errors

   Errors can be reported in ACME both at the HTTP layer and within ACME
   payloads.  ACME servers can return responses with an HTTP error
   response codes (4XX or 5XX).  For example: If the client submits a
   request using a method not allowed in this document, then the server
   MAY return status code 405 (Method Not Allowed).

   When the server responds with an error status, it SHOULD provide
   additional information using problem document
   [I-D.ietf-appsawg-http-problem].  The "type", "detail", and
   "instance" fields MUST be populated.  To facilitate automatic
   response to errors, this document defines the following standard
   tokens for use in the "type" field (within the "urn:acme:"
   namespace):

   +----------------+--------------------------------------------------+
   | Code           | Semantic                                         |
   +----------------+--------------------------------------------------+
   | malformed      | The request message was malformed                |
   |                |                                                  |
   | unauthorized   | The client lacks sufficient authorization        |
   |                |                                                  |
   | serverInternal | The server experienced an internal error         |
   |                |                                                  |
   | badCSR         | The CSR is unacceptable (e.g., due to a short    |
   |                | key)                                             |
   +----------------+--------------------------------------------------+

   Authorization and challenge objects can also contain error
   information to indicate why the server was unable to validate
   authorization.

   TODO: Flesh out errors and syntax for them

5.3.  Registration

   An ACME registration resource represents a set of metadata associated
   to an account key pair, most importantly contact information and a
   recovery token.  Registration resources have the following structure:

   key (required, dictionary):  The public key of the account key pair,
      encoded as a JSON Web Key object [I-D.ietf-jose-json-web-key].

   contact (optional, array of string):  An array of URIs that the
      server can use to contact the client for issues related to this
      authorization.  For example, the server may wish to notify the
      client about server-initiated revocation, or check with the client



Barnes, et al.            Expires July 28, 2015                [Page 11]


Internet-Draft                    ACME                      January 2015


      on future authorizations (see the "recoveryContact" challenge
      type).

   recoveryToken (optional, string):  An opaque token that the client
      can present to demonstrate that it participated in a prior
      authorization transaction.

   A client creates a new account with the server by sending a POST
   request to the server's new-registration URI.  The body of the
   request is a registration object containing only the "contact" field.

   POST /acme/new-registration HTTP/1.1
   Host: example.com

   {
     "contact": [
       "mailto:cert-admin@example.com",
       "tel:+12025551212"
     ],
   }
   /* Signed as JWS */


   The server MUST ignore any values provided in the "key" or
   "recoveryToken" fields, as well as any other fields that it does not
   recognize.  If new fields are specified in the future, the
   specification of those fields MUST describe whether they may be
   provided by the client.

   The server creates a registration object with the included contact
   information.  The "key" element of the registration is set to the
   public key used to verify the JWS (i.e., the "jwk" element of the JWS
   header).  The server also provides a random recovery token.  The
   server returns this registration object in a 201 (Created) response,
   with the registration URI in a Location header field.  The server may
   also indicate its new-authorization URI using the "next" link
   relation.














Barnes, et al.            Expires July 28, 2015                [Page 12]


Internet-Draft                    ACME                      January 2015


   HTTP/1.1 201 Created
   Content-Type: application/json
   Location: https://example.com/reg/asdf
   Link: <https://example.com/acme/new-authz>;rel="next"

   {
     "key": { /* JWK from JWS header */ },

     "contact": [
       "mailto:cert-admin@example.com",
       "tel:+12025551212"
     ],

     "recoveryToken": "uV2Aph7-sghuCcFVmvsiZw"
   }


   If the client wishes to update this information in the future, it
   sends a POST request with updated information to the registration
   URI.  The server MUST ignore any updates to the "key" or
   "recoveryToken" fields, and MUST verify that the request is signed
   with the private key corresponding to the "key" field of the request
   before updating the registration.

   Servers SHOULD NOT respond to GET requests for registration
   resources, since these requests not authenticated.

5.4.  Authorization Resources

   An ACME authorization resource represents server's authorization for
   an account key pair to represent an identifier.  In addition to a
   public key and identifier, an authorization includes several metadata
   fields, such as the status of the authorization (e.g., "pending",
   "valid", or "revoked") and which challenges were used to validate
   possession of the identifier.

   The structure of an ACME authorization resource is as follows:

   identifier (required, dictionary of string):  The identifier that the
      account key is authorized to represent

      type (required, string):  The type of identifier.

      value (required, string):  The identifier itself.

   key (required, dictionary):  The public key of the account key pair,
      encoded as a JSON Web Key object [I-D.ietf-jose-json-web-key].




Barnes, et al.            Expires July 28, 2015                [Page 13]


Internet-Draft                    ACME                      January 2015


   status (optional, string):  The status of this authorization.
      Possible values are: "pending", "valid", and "invalid".  If this
      field is missing, then the default value is "pending".

   expires (optional, string):  The date after which the server will
      consider this authorization invalid, encoded in the format
      specified in RFC 3339 [RFC3339].

   challenges (required, dictionary):  The challenges that the client
      needs to fulfill in order to prove possession of the identifier
      (for pending authorizations).  For final authorizations, the
      challenges that were used.  Each key in the dictionary is a type
      of challenge, and the value is a dictionary with parameters
      required to validate the challenge, as specified in Section
      {identifier-validation-challenges}.

   combinations (optional, array of arrays of integers):  A collection
      of sets of challenges, each of which would be sufficient to prove
      possession of the identifier.  Clients complete a set of
      challenges that that covers at least one set in this array.
      Challenges are identified by their indices in the challenges
      array.  If no "combinations" element is included in an
      authorization object, the client completes all challenges.

   The only type of identifier defined by this specification is a fully-
   qualified domain name (type: "dns").  The value of the identifier
   MUST be the ASCII representation of the domain name.
























Barnes, et al.            Expires July 28, 2015                [Page 14]


Internet-Draft                    ACME                      January 2015


   {
     "status": "valid",
     "expires": "2015-03-01",

     "identifier": {
       "type": "domain",
       "value": "example.org"
     },

     "key": { /* JWK */ },

     "challenges": [
       "simpleHttps": {
         "status": "valid",
         "validated": "2014-12-01T12:05Z",
         "token": "IlirfxKKXAsHtmzK29Pj8A"
         "path": "Hf5GrX4Q7EBax9hc2jJnfw"
       },
       "recoveryToken": {
         "status": "valid",
         "validated": "2014-12-01T12:07Z",
         "token": "23029d88d9e123e"
       }
     ],
   }


5.5.  Key Authorization

   The key authorization process establishes the authorization of an
   account key pair to manage certificates for a given identifier.  This
   process must assure the server of two things: First, that the client
   controls the private key of the key pair, and second, that the client
   holds the identifier in question.  This process may be repeated to
   associate multiple identifiers to a key pair (e.g., to request
   certificates with multiple identifiers), or to associate multiple key
   pairs with an identifier (e.g., to allow multiple entities to manage
   certificates).

   As illustrated by the figure in the overview section above, the
   authorization process proceeds in two phases.  The client first
   requests a new authorization, and then the server issues challenges
   that the client responds to.

   To begin the key authorization process, the client sends a POST
   request to the server's new-authorization resource.  The body of the
   POST request MUST contain a JWS object, whose payload is a partial
   authorization object.  This JWS object MUST contain only the



Barnes, et al.            Expires July 28, 2015                [Page 15]


Internet-Draft                    ACME                      January 2015


   "identifier" field, so that the server knows what identifier is being
   authorized.  The client MAY provide contact information in the
   "contact" field in this or any subsequent request.

   POST /acme/new-authorization HTTP/1.1
   Host: example.com

   {
     "identifier": {
       "type": "domain",
       "value": "example.org"
     }
   }
   /* Signed as JWS */


   Before processing the authorization further, the server SHOULD
   determine whether it is willing to issue certificates for the
   identifier.  For example, the server should check that the identifier
   is of a supported type.  Servers might also check names against a
   blacklist of known high-value identifiers.  If the server is
   unwilling to issue for the identifier, it SHOULD return a 403
   (Forbidden) error, with a problem document describing the reason for
   the rejection.

   If the server is willing to proceed, it builds a pending
   authorization object from the initial authorization object submitted
   by the client.

   o  "identifier" the identifier submitted by the client.

   o  "key": the key used to verify the client's JWS request (i.e., the
      contents of the "jwk" field in the JWS header)

   o  "status": SHOULD be "pending" (MAY be omitted)

   o  "challenges" and "combinations": As selected by the server's
      policy for this identifier

   o  The "expires" field MUST be absent.

   The server allocates a new URI for this authorization, and returns a
   201 (Created) response, with the authorization URI in a Location
   header field, and the JSON authorization object in the body.







Barnes, et al.            Expires July 28, 2015                [Page 16]


Internet-Draft                    ACME                      January 2015


   HTTP/1.1 201 Created
   Content-Type: application/json
   Location: https://example.com/authz/asdf
   Link: <https://example.com/acme/new-cert>;rel="next"

   {
     "status": "pending",

     "identifier": {
       "type": "domain",
       "value": "example.org"
     },

     "key": { /* JWK from JWS header */ },

     "challenges": [
       {
         "type": "simpleHttps",
         "uri": "https://example.com/authz/asdf/0",
         "token": "IlirfxKKXAsHtmzK29Pj8A"
       },
       {
         "type": "dns",
         "uri": "https://example.com/authz/asdf/1"
         "token": "DGyRejmCefe7v4NfDGDKfA"
       },
       {
         "type": "recoveryToken",
         "uri": "https://example.com/authz/asdf/2"
       }
     },

     "combinations": [
       [0, 2],
       [1, 2]
     ]
   }


   The client needs to respond with information to complete the
   challenges.  To do this, the client updates the authorization object
   received from the server by filling in any required information in
   the elements of the "challenges" dictionary.  For example, if the
   client wishes to complete the "simpleHttps" challenge, it needs to
   provide the "path" component.  (This is also the stage where the
   client should perform any actions required by the challenge.)





Barnes, et al.            Expires July 28, 2015                [Page 17]


Internet-Draft                    ACME                      January 2015


   The client sends these updates back to the server in the form of a
   JSON object with the response fields required by the challenge type,
   carried in a POST request to the challenge URI (not authorization URI
   or the new-authorization URI).  This allows the client to send
   information only for challenges it is responding to.

   For example, if the client were to respond to the "simpleHttps"
   challenge in the above authorization, it would send the following
   request:

   POST /acme/authz/asdf/0 HTTP/1.1
   Host: example.com

   {
     "path": "Hf5GrX4Q7EBax9hc2jJnfw"
   }
   /* Signed as JWS */


   The server updates the authorization document by updating its
   representation of the challenge with the response fields provided by
   the client.  The server MUST ignore any fields in the response object
   that are not specified as response fields for this type of challenge.
   The server provides a 200 response including the updated challenge.

   Presumably, the client's responses provide the server with enough
   information to validate one or more challenges.  The server is said
   to "finalize" the authorization when it has completed all the
   validations it is going to complete, and assigns the authorization a
   status of "valid" or "invalid", corresponding to whether it considers
   the account key authorized for the identifier.  If the final state is
   "valid", the server MUST add an "expires" field to the authorization.
   When finalizing an authorization, the server MAY remove the
   "combinations" field (if present), remove any unfulfilled challenges,
   or add a "recoveryToken" field.

   Usually, the validation process will take some time, so the client
   will need to poll the authorization resource to see when it is
   finalized.  For challenges where the client can tell when the server
   has validated the challenge (e.g., by seeing an HTTP or DNS request
   from the server), the client SHOULD NOT begin polling until it has
   seen the validation request from the server.

   To check on the status of an authorization, the client sends a GET
   request to the authorization URI, and the server responds with the
   current authorization object.  To provide some degree of control over
   polling, the server MAY provide a Retry-After header field to
   indicate how long it expect to take in finalizing the response.



Barnes, et al.            Expires July 28, 2015                [Page 18]


Internet-Draft                    ACME                      January 2015


   GET /acme/authz/asdf HTTP/1.1
   Host: example.com

   HTTP/1.1 200 OK

   {
     "status": "valid",
     "expires": "2015-03-01",

     "identifier": {
       "type": "domain",
       "value": "example.org"
     },

     "key": { /* JWK */ },

     "contact": [
       "mailto:cert-admin@example.com",
       "tel:+12025551212"
     ],

     "challenges": [
       "simpleHttps": {
         "status": "valid",
         "validated": "2014-12-01T12:05Z",
         "token": "IlirfxKKXAsHtmzK29Pj8A"
         "path": "Hf5GrX4Q7EBax9hc2jJnfw"
       },
       "recoveryToken": {
         "status": "valid",
         "validated": "2014-12-01T12:07Z",
         "token": "23029d88d9e123e"
       }
     ],
   }


5.5.1.  Recovery Tokens

   A recovery token is a fallback authentication mechanism.  In the
   event that a client loses all other state, including authorized key
   pairs and key pairs bound to certificates, the client can use the
   recovery token to prove that it was previously authorized for the
   identifier in question.

   This mechanism is necessary because once an ACME server has issued an
   Authorization Key for a given identifier, that identifier enters a
   higher-security state, at least with respect the ACME server.  That



Barnes, et al.            Expires July 28, 2015                [Page 19]


Internet-Draft                    ACME                      January 2015


   state exists to protect against attacks such as DNS hijacking and
   router compromise which tend to inherently defeat all forms of Domain
   Validation.  So once a domain has begun using ACME, new DV-only
   authorization will not be performed without proof of continuity via
   possession of an Authorized Private Key or potentially a Subject
   Private Key for that domain.

   This higher state of security poses some risks.  From time to time,
   the administrators and owners of domains may lose access to keys they
   have previously had issued or certified, including Authorized private
   keys and Subject private keys.  For instance, the disks on which this
   key material is stored may suffer failures, or passphrases for these
   keys may be forgotten.  In some cases, the security measures that are
   taken to protect this sensitive data may contribute to its loss.

   Recovery Tokens and Recovery Challenges exist to provide a fallback
   mechanism to restore the state of the domain to the server-side
   administrative security state it was in prior to the use of ACME,
   such that fresh Domain Validation is sufficient for reauthorization.

   Recovery tokens are therefore only useful to an attacker who can also
   perform Domain Validation against a target domain, and as a result
   client administrators may choose to handle them with somewhat fewer
   security precautions than Authorized and Subject private keys,
   decreasing the risk of their loss.

   Recovery tokens come in several types, including high-entropy
   passcodes (which need to be safely preserved by the client admin) and
   email addresses (which are inherently hard to lose, and which can be
   used for verification, though they may be a little less secure).

   Recovery tokens are employed in response to Recovery Challenges.
   Such challenges will be available if the server has issued Recovery
   Tokens for a given domain, and the combination of a Recovery
   Challenge and a domain validation Challenge is a plausible
   alternative to other challenge sets for domains that already have
   extant Authorized keys.

5.6.  Certificate Issuance

   The holder of an authorized key pair for an identifier may use ACME
   to request that a certificate be issued for that identifier.  The
   client makes this request by sending a POST request to the server's
   new-certificate resource.  The body of the POST is a JWS object whose
   JSON payload contains a Certificate Signing Request (CSR) [RFC2986]
   and set of authorization URIs.  The CSR encodes the parameters of the
   requested certificate; authority to issue is demonstrated by the JWS
   signature and the linked authorizations.



Barnes, et al.            Expires July 28, 2015                [Page 20]


Internet-Draft                    ACME                      January 2015


   csr (required, string):  A CSR encoding the parameters for the
      certificate being requested.  The CSR is sent in base64-encoded
      version the DER format.  (Note: This field uses the same modified
      base64-encoding rules used elsewhere in this document, so it is
      different from PEM.)

   authorizations (required, array of string):  An array of URIs for
      authorization resources.

POST /acme/new-cert HTTP/1.1
Host: example.com
Accept: application/pkix-cert

{
  "csr": "5jNudRx6Ye4HzKEqT5...FS6aKdZeGsysoCo4H9P",
  "authorizations": [
    "https://example.com/acme/authz/asdf"
  ]
}
/* Signed as JWS */

~~~~~~~~~

The CSR encodes the client's requests with regard to the content of the certificate to be issued.  The CSR MUST contain at least one extensionRequest attribute {{RFC2985}} requesting a subjectAltName extension, containing the requested identifiers.

The values provided in the CSR are only a request, and are not guaranteed.  The server or CA may alter any fields in the certificate before issuance.  For example, the CA may remove identifiers that are not authorized for the key indicated in the "authorization" field.

If the CA decides to issue a certificate, then the server returns the certificate in a response with status code 201 (Created).  The server MUST indicate a URL for this certificate in a Location header field.

The default format of the certificate is DER (application/pkix-cert).  The client may request other formats by including an Accept header in its request.

The server can provide metadata about the certificate in HTTP headers.  For example, the server can include a Link relation header field {{RFC5988}} with relation "up" to provide a certificate under which this certificate was issued.  Or the server can include an Expires header as a hint to the client about when to re-query to refresh the certificate.  (Of course, the real expiration of the certificate is controlled by the notAfter time in the certificate itself.)


   HTTP/1.1 201 Created Content-Type: application/pkix-cert Link:
   https://example.com/acme/ca-cert ;rel="up";title="issuer" Location:
   https://example.com/acme/cert/asdf

   [DER-encoded certificate]












Barnes, et al.            Expires July 28, 2015                [Page 21]


Internet-Draft                    ACME                      January 2015


## Certificate Refresh

The certificate URL (provided in the Location header of the server's response) is used to refresh or revoke the certificate.  To refresh the certificate, the client simply sends a GET request to the certificate URL.  This allows the server to provide the client with updated certificates with the same content and different validity intervals, for as long as all of the authorization objects underlying the certificate are valid.

If a client sends a refresh request and the server is not willing to refresh the certificate, the server MUST respond with status code 403 (Forbidden).  If the client still wishes to obtain a certificate, it can re-initiate the authorization process for any expired authorizations related to the certificate.

## Certificate Revocation

To request that a certificate be revoked, the client sends a POST request to the certificate URL.  The body of the POST is a JWS object whose JSON payload contains an indication when the client would like the certificate to be revoked:

revoke (required, string):
: The time at which the certificate should be revoked.  The value of this field MUST be either the literal string "now", or a date in RFC 3339 format {{RFC3339}}.

authorizations (required, array of string):
: An array of URIs for authorization resources.


   POST /acme/cert/asdf HTTP/1.1 Host: example.com

   { "revoke": "now", "authorizations": [
   "https://example.com/acme/authz/asdf" ] } /* Signed as JWS */

Before revoking a certificate, the server MUST verify that the account key pair used to sign the request is authorized to act for all of the identifier(s) in the certificate.  The server MAY also accept a signature by the private key corresponding to the public key in the certificate.

If the revocation succeeds, the server responds with status code 200 (OK).  If the revocation fails, the server returns an error.


   HTTP/1.1 200 OK Content-Length: 0

   -- or --

   HTTP/1.1 403 Forbidden Content-Type: application/problem+json
   Content-Language: en

   { "type": "urn:acme:error:unauthorized" "detail": "No authorization
   provided for name example.net" "instance": "http://example.com/doc/
   unauthorized" }














Barnes, et al.            Expires July 28, 2015                [Page 22]


Internet-Draft                    ACME                      January 2015


# Identifier Validation Challenges

There are few types of identifier in the world for which there is a standardized mechanism to prove possession of a given identifier.  In all practical cases, CAs rely on a variety of means to test whether an entity applying for a certificate with a given identifier actually controls that identifier.

To accommodate this reality, ACME includes an extensible challenge/response framework for identifier validation.  This section describes an initial set of Challenge types.  Each challenge must describe:

* Content of Challenge payloads (in Challenge messages)
* Content of Response payloads (in authorizationRequest messages)
* How the server uses the Challenge and Response to verify control of an identifier

The only general requirement for Challenge and Response payloads is that they MUST be structured as a JSON object, and they MUST contain a parameter "type" that specifies the type of Challenge or Response encoded in the object.

Different challenges allow the server to obtain proof of different aspects of control over an identifier.  In some challenges, like Simple HTTPS and DVSNI, the client directly proves control of an identifier.  In other challenges, such as Recovery or Proof of Possession, the client proves historical control of the identifier, by reference to a prior authorization transaction or certificate.

The choice of which Challenges to offer to a client under which circumstances is a matter of server policy.  A server may choose different sets of challenges depending on whether it has interacted with a domain before, and how.  For example:

| Domain status                                 | Challenges typically sufficient for (re)Authorization |
|:==============================================|:======================================================|
| No known prior certificates or ACME usage     | Domain Validation (DVSNI or Simple HTTPS)             |
| Existing valid certs, first use of ACME       | DV + Proof of Possession of previous CA-signed key    |
| Ongoing ACME usage                            | PoP of previous Authorized key                        |
| Ongoing ACME usage, lost Authorized key       | DV + (Recovery or PoP of ACME-certified Subject key)  |
| ACME usage, all keys and recovery tokens lost | Recertification by another CA + PoP of that key       |

The identifier validation challenges described in this section all relate to validation of domain names.  If ACME is extended in the future to support other types of identifier, there will need to be new Challenge types, and they will need to specify which types of identifier they apply to.

## Simple HTTPS

With Simple HTTPS validation, the client in an ACME transaction proves its control over a domain name by proving that it can provision resources on an HTTPS server that responds for that domain name.  The ACME server challenges the client to provision a file with a specific string as its contents.

type (required, string):
: The string "simpleHttps"

token (required, string):
: The value to be provisioned in the file.  This value MUST have at least 128 bits of entropy, in order to prevent an attacker from guessing it.  It MUST NOT contain any non-ASCII characters.


   { "type": "simpleHttps", "token":
   "evaGxfADs6pSRb2LAv9IZf17Dt3juxGJ+PCt92wr+oA" }

A client responds to this Challenge by provisioning the nonce as a resource on the HTTPS server for the domain in question.  The path at which the resource is provisioned is determined by the client, but MUST begin with ".well-known/acme-challenge/".  The content type of the resource MUST be "text/plain".  The client returns the part of the path coming after that prefix in its Response message.

type (required, string):
: The string "simpleHttps"

path (required, string):
: The string to be appended to the standard prefix ".well-known/acme-challenge" in order to form the path at which the nonce resource is provisioned.  The result of concatenating the prefix with this value MUST match the "path" production in the standard URI format {{RFC3986}}




Barnes, et al.            Expires July 28, 2015                [Page 23]


Internet-Draft                    ACME                      January 2015


   { "type": "simpleHttps", "path": "6tbIMBC5Anhl5bOlWT5ZFA" }

Given a Challenge/Response pair, the server verifies the client's control of the domain by verifying that the resource was provisioned as expected.

1. Form a URI by populating the URI template "https://{domain}/.well-known/acme-challenge/{path}", where the domain field is set to the domain name being verified and the path field is the path provided in the challenge {{RFC6570}}.
2. Verify that the resulting URI is well-formed.
3. Dereference the URI using an HTTPS GET request.
4. Verify that the certificate presented by the HTTPS server is a valid self-signed certificate, and contains the domain name being validated as well as the public key of the key pair being authorized.
5. Verify that the Content-Type header of the response is either absent, or has the value "text/plain"
6. Compare the entity body of the response with the nonce.  This comparison MUST be performed in terms of Unicode code points, taking into account the encodings of the stored nonce and the body of the request.

If the GET request succeeds and the entity body is equal to the nonce, then the validation is successful.  If the request fails, or the body does not match the nonce, then it has failed.


## Domain Validation with Server Name Indication

The Domain Validation with Server Name Indication (DVSNI) validation method aims to ensure that the ACME client has administrative access to the web server at the domain name being validated, and possession of the private key being authorized.  The ACME server verifies that the operator can reconfigure the web server by having the client create a new self-signed challenge certificate and respond to TLS connections from the ACME server with it.

The challenge proceeds as follows: The ACME server sends the client a random value R and a nonce used to identify the transaction.  The client responds with another random value S.  The server initiates a TLS connection on port 443 to a host with the domain name being validated.  In the handshake, the ACME server sets the Server Name Indication extension set to "\<nonce\>.acme.invalid".  The TLS server (i.e., the ACME client) should respond with a valid self-signed certificate containing both the domain name being validated and the domain name "\<Z\>.acme.invalid", where Z = SHA-256(R &#124;&#124; S).

The ACME server's Challenge provides its random value R, and a random nonce used to identify the transaction:

type (required, string):
: The string "dvsni"

r (required, string):
: A random 32-byte octet, base64-encoded

nonce (required, string):
: A random 16-byte octet string, hex-encoded (so that it can be used as a DNS label)


   { "type": "dvsni", "r":
   "Tyq0La3slT7tqQ0wlOiXnCY2vyez7Zo5blgPJ1xt5xI", "nonce":
   "a82d5ff8ef740d12881f6d3c2277ab2e" }
















Barnes, et al.            Expires July 28, 2015                [Page 24]


Internet-Draft                    ACME                      January 2015


The ACME server MAY re-use nonce values, but SHOULD periodically refresh them.  ACME clients MUST NOT rely on nonce values being stable over time.

The client responds to this Challenge by configuring a TLS server on port 443 of a server with the domain name being validated:

1. Decode the server's random value R
2. Generate a random 32-byte octet string S
3. Compute Z = SHA-256(R &#124;&#124; S) (where &#124;&#124; denotes concatenation of octet strings)
4. Generate a self-signed certificate with a subjectAltName extension containing two dNSName values:
  1. The domain name being validated
  2. A name formed by hex-encoding Z and appending the suffix ".acme.invalid"
5. Compute a nonce domain name by appending the suffix ".acme.invalid" to the nonce provided by the server.
6. Configure the TLS server such that when a client presents the nonce domain name in the SNI field, the server presents the generated certificate.

The client's response provides its random value S:

type (required, string):
: The string "dvsni"

s (required, string):
: A random 32-byte secret octet string, base64-encoded


   { "type": "dvsni", "s": "9dbjsl3gTAtOnEtKFEmhS6Mj-ajNjDcOmRkp3Lfzm3c"
   }



























Barnes, et al.            Expires July 28, 2015                [Page 25]


Internet-Draft                    ACME                      January 2015


Given a Challenge/Response pair, the ACME server verifies the client's control of the domain by verifying that the TLS server was configured as expected:

1. Compute the value Z = SHA-256(R &#124;&#124; S)
2. Open a TLS connection to the domain name being validated on port 443, presenting the value "\<nonce\>.acme.invalid" in the SNI field.
3. Verify the following properties of the certificate provided by the TLS server:
  * It is a valid self-signed certificate
  * The public key is the public key for the key pair being authorized
  * It contains the domain name being validated as a subjectAltName
  * It contains a subjectAltName matching the hex-encoding of Z, with the suffix ".acme.invalid"

It is RECOMMENDED that the ACME server verify the challenge certificate using multi-path probing techniques to reduce the risk of DNS hijacking attacks.

If the server presents a certificate matching all of the above criteria, then the validation is successful.  Otherwise, the validation fails.

## Recovery Contact

A server may issue a recovery contact challenge to verify that the client is the same as the entity that previously requested authorization, using contact information provided by the client in a prior authorizationRequest message.

The server's message to the client may request action in-band or out-of-band to ACME.  The server can provide a token in the message that the client provides in its response.  Or the server could provide some out-of-band response channel in its message, such as a URL to click in an email.

type (required, string):
: The string "recoveryContact"

activationURL (optional, string):
: A URL the client can visit to cause a recovery message to be sent to client's contact address.

successURL (optional, string):
: A URL the client may poll to determine if the user has successfully clicked a link or completed other tasks specified by the recovery message.  This URL will return a 200 success code if the required tasks have been completed.  The client SHOULD NOT poll the URL more than once every three seconds.

contact (optional, string)
: A full or partly obfuscated version of the contact URI that the server will use to contact the client.  Client software may present this to a user in order to suggest what contact point the user should check (e.g., an email address).


   { "type": "recoveryContact", "activationURL" :
   "https://example.ca/sendrecovery/a5bd99383fb0", "successURL" :
   "https://example.ca/confirmrecovery/bb1b9928932", "contact" :
   "c******n@example.com" }

type (required, string):
: The string "recoveryContact"

token (optional, string):
: If the user transferred a token from a contact email or call into the client software, the client sends it here.  If it the client has received a 200 success response while polling the RecoveryContact Challenge's successURL, this field SHOULD be omitted.


   { "type": "recoveryContact", "token": "23029d88d9e123e" }





Barnes, et al.            Expires July 28, 2015                [Page 26]


Internet-Draft                    ACME                      January 2015


If the value of the "token" field matches the value provided in the out-of-band message to the client, or if the client has completed the required out-of-band action, then the validation succeeds.  Otherwise, the validation fails.


## Recovery Token

A recovery token is a simple way for the server to verify that the client was previously authorized for a domain.  The client simply provides the recovery token that was provided in the authorize message.

type (required, string):
: The string "recoveryToken"


   { "type": "recoveryToken" }

The response to a recovery token challenge is simple; the client sends the requested token that it was provided by the server earlier.

type (required, string):
: The string "recoveryToken"

token (optional, string):
: The recovery token provided by the server.


   { "type": "recoveryToken", "token": "23029d88d9e123e" }




























Barnes, et al.            Expires July 28, 2015                [Page 27]


Internet-Draft                    ACME                      January 2015


If the value of the "token" field matches a recovery token that the server previously provided for this domain, then the validation succeeds.  Otherwise, the validation fails.


## Proof of Possession of a Prior Key

The Proof of Possession challenge verifies that a client possesses a private key corresponding to a server-specified public key, as demonstrated by its ability to correctly sign server-provided data with that key.

This method is useful if a server policy calls for issuing a certificate only to an entity that already possesses the subject private key of a particular prior related certificate (perhaps issued by a different CA).  It may also help enable other kinds of server policy that are related to authenticating a client's identity using digital signatures.

This challenge proceeds in much the same way as the proof of possession of the authorized key pair in the main ACME flow (challenge + authorizationRequest).  The server provides a nonce and the client signs over the nonce.  The main difference is that rather than signing with the private key of the key pair being authorized, the client signs with a private key specified by the server.  The server can specify which key pair(s) are acceptable directly (by indicating a public key), or by asking for the key corresponding to a certificate.

The server provides the following fields as part of the challenge:

type (required, string):
: The string "proofOfPossession"

alg (required, string):
: A token indicating the cryptographic algorithm that should be used by the client to compute the signature {{I-D.ietf-jose-json-web-algorithms}}.  (MAC algorithms such as "HS*" MUST NOT be used.)  The client MUST verify that this algorithm is supported for the indicated key before responding to this challenge.

nonce (required, string):
: A random 16-byte octet string, base64-encoded

hints (required, object):
: A JSON object that contains various clues for the client about what the requested key is, such that the client can find it.  Entries in the hints object may include:

jwk (required, object):
: A JSON Web Key object describing the public key whose corresponding private key should be used to generate the signature {{I-D.ietf-jose-json-web-key}}

certFingerprints (optional, array):
: An array of certificate fingerprints, hex-encoded SHA1 hashes of DER-encoded certificates that are known to contain this key

certs (optional, array):
: An array of certificates, in PEM encoding, that contain acceptable public keys.

subjectKeyIdentifiers (optional, array):
: An array of hex-encoded Subject Key Identifiers (SKIDs) from certificate(s) that contain the key.  Because of divergences in the way that SKIDs are calculated {{RFC5280}}, there may conceivably be more than one of these.

serialNumbers (optional, array of numbers):
: An array of serial numbers of certificates that are known to contain the requested key

issuers (optional, array):
: An array of X.509 Distinguished Names {{RFC5280}} of CAs that have been observed to issue certificates for this key, in text form {{RFC4514}}

authorizedFor (optional, array):
: An array of domain names, if any, for which this server regards the key as an ACME Authorized key.






Barnes, et al.            Expires July 28, 2015                [Page 28]


Internet-Draft                    ACME                      January 2015


   { "type": "proofOfPossession", "alg": "RS256", "nonce":
   "eET5udtV7aoX8Xl8gYiZIA", "hints" : { "jwk": { "kty": "RSA", "e":
   "AQAB", "n": "KxITJ0rNlfDMAtfDr8eAw...fSSoehDFNZKQKzTZPtQ" },
   "certFingerprints": [ "93416768eb85e33adc4277f4c9acd63e7418fcfe",
   "16d95b7b63f1972b980b14c20291f3c0d1855d95",
   "48b46570d9fc6358108af43ad1649484def0debf" ],
   "subjectKeyIdentifiers": [ "d0083162dcc4c8a23ecb8aecbd86120e56fd24e5"
   ], "serialNumbers": [34234239832, 23993939911, 17], "issuers": [
   "C=US, O=SuperT LLC, CN=SuperTrustworthy Public CA",
   "O=LessTrustworthy CA Inc, CN=LessTrustworthy But StillSecure" ],
   "authorizedFor": ["www.example.com", "example.net"] } }

In this case the server is challenging the client to prove its control over the private key that corresponds to the public key specified in the jwk object.  The signing algorithm is specified by the alg field.  The nonce value is used by the server to identify this challenge and is also used, also with a client-provided signature nonce, as part of the signature input.


     signature-input = signature-nonce || server-nonce

The client's response includes the server-provided nonce, together with a signature over that nonce by one of the private keys requested by the server.

type (required, string):
: The string "proofOfPossession"

nonce (required, string):
: The server nonce that the server previously associated with this challenge

signature (required, object):
: The ACME signature computed over the signature-input using the server-specified algorithm



   { "type": "proofOfPossession", "nonce": "eET5udtV7aoX8Xl8gYiZIA",
   "signature": { "alg": "RS256", "nonce": "eET5udtV7aoX8Xl8gYiZIA",
   "sig": "KxITJ0rNlfDMAtfDr8eAw...fSSoehDFNZKQKzTZPtQ", "jwk": { "kty":
   "RSA", "e": "AQAB", "n":
   "KxITJ0rNlfDMAtfDr8eAw...fSSoehDFNZKQKzTZPtQ" } } }
















Barnes, et al.            Expires July 28, 2015                [Page 29]


Internet-Draft                    ACME                      January 2015


Note that just as in the authorizationRequest message, there are two nonces here, once provided by the client (inside the signature object) and one provided by the server in its challenge (outside the signature object).  The signature covers the concatenation of these two nonces (as specified in the signature-input above).

If the server is able to validate the signature and confirm that the jwk and alg objects are unchanged from the original challenge, the server can conclude that the client is in control of the private key that corresponds to the specified public key.  The server can use this evidence in support of its authorization and certificate issuance policies.


## DNS

When the identifier being validated is a domain name, the client can prove control of that domain by provisioning records under it.   The DNS challenge requires the client to provision a TXT record containing a validation token under a specific validation domain name.

type (required, string):
: The string "dns"

token (required, string):
: An ASCII string that is to be provisioned in the TXT record.  This string SHOULD be randomly generated, with at least 128 bits of entropy (e.g., a hex-encoded random octet string).


   { "type": "dns", "token": "17817c66b60ce2e4012dfad92657527a" }

In response to this challenge, the client first MUST verify that the token contains only ASCII characters.  If so, the client constructs the validation domain name by appending the label "_acme-challenge" to the domain name being validated.  For example, if the domain name being validated is "example.com", then the client would provision the following DNS record:


   _acme-challenge.example.com.  IN TXT
   "17817c66b60ce2e4012dfad92657527a"

The response to a DNS challenge is simply an acknowledgement that the relevant record has been provisioned.

type (required, string):
: The string "dns"


   { "type": "dns" }

   ~~~~~~~~~~

   To validate a DNS challenge, the server queries for TXT records under
   the validation domain name.  If it receives a record whose contents
   match the token in the challenge, then the validation succeeds.
   Otherwise, the validation fails.

5.7.  Other possibilities

   For future work:

   o  Email

   o  DNSSEC

   o  WHOIS



Barnes, et al.            Expires July 28, 2015                [Page 30]


Internet-Draft                    ACME                      January 2015


6.  IANA Considerations

   TODO

   o  Register .well-known path

   o  Create identifier validation method registry

   o  Registries of syntax tokens, e.g., message types / error types?

7.  Security Considerations

   TODO

   o  General authorization story

   o  PoP nonce entropy

   o  ToC/ToU; duration of key authorization

   o  Clients need to protect recovery key

   o  CA needs to perform a very wide range of issuance policy
      enforcement and sanity-check steps

   o  Parser safety (for JSON, JWK, ASN.1, and any other formats that
      can be parsed by the ACME server)

8.  Acknowledgements

   This document draws on many concepts established by Eric Rescorla's
   "Automated Certificate Issuance Protocol" draft.  Martin Thomson
   provided helpful guidance in the use of HTTP.

9.  References

9.1.  Normative References

   [I-D.ietf-appsawg-http-problem]
              Nottingham, M. and E. Wilde, "Problem Details for HTTP
              APIs", draft-ietf-appsawg-http-problem-00 (work in
              progress),   January 2015.

   [I-D.ietf-jose-json-web-algorithms]
              Jones, M., "JSON Web Algorithms (JWA)", draft-ietf-jose-
              json-web-algorithms-40 (work in progress), January 2015.





Barnes, et al.            Expires July 28, 2015                [Page 31]


Internet-Draft                    ACME                      January 2015


   [I-D.ietf-jose-json-web-key]
              Jones, M., "JSON Web Key (JWK)", draft-ietf-jose-json-web-
              key-41 (work in progress), January 2015.

   [I-D.ietf-jose-json-web-signature]
              Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", draft-ietf-jose-json-web-signature-41
              (work in progress), January 2015.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2314]  Kaliski, B., "PKCS #10: Certification Request Syntax
              Version 1.5", RFC 2314, March 1998.

   [RFC2985]  Nystrom, M. and B. Kaliski, "PKCS #9: Selected Object
              Classes and Attribute Types Version 2.0", RFC 2985,
              November 2000.

   [RFC2986]  Nystrom, M. and B. Kaliski, "PKCS #10: Certification
              Request Syntax Specification Version 1.7", RFC 2986,
              November 2000.

   [RFC3339]  Klyne, G., Ed. and C. Newman, "Date and Time on the
              Internet: Timestamps", RFC 3339, July 2002.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66, RFC
              3986, January 2005.

   [RFC4514]  Zeilenga, K., "Lightweight Directory Access Protocol
              (LDAP): String Representation of Distinguished Names", RFC
              4514, June 2006.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246, August 2008.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, May 2008.

   [RFC5988]  Nottingham, M., "Web Linking", RFC 5988, October 2010.




Barnes, et al.            Expires July 28, 2015                [Page 32]


Internet-Draft                    ACME                      January 2015


   [RFC6570]  Gregorio, J., Fielding, R., Hadley, M., Nottingham, M.,
              and D. Orchard, "URI Template", RFC 6570, March 2012.

   [RFC7159]  Bray, T., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, March 2014.

   [RFC7386]  Hoffman, P. and J. Snell, "JSON Merge Patch", RFC 7386,
              October 2014.

9.2.  Informative References

   [RFC2818]  Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.

Authors' Addresses

   Richard Barnes
   Mozilla

   Email: rlb@ipv.sx


   Peter Eckersley
   EFF

   Email: pde@eff.org


   Seth Schoen
   EFF

   Email: schoen@eff.org


   Alex Halderman
   University of Michigan

   Email: jhalderm@eecs.umich.edu


   James Kasten
   University of Michigan

   Email: jdkasten@umich.edu








Barnes, et al.            Expires July 28, 2015                [Page 33]


Html markup produced by rfcmarkup 1.128b, available from https://tools.ietf.org/tools/rfcmarkup/