[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02

DMARC Working Group                                            M. Davids
Internet-Draft                                                 SIDN Labs
Updates: 7489 (if approved)                                 May 16, 2017
Intended status: Standards Track
Expires: November 17, 2017


                  DMARC Failure reporting Interval tag
                      draft-davids-dmarc-fi-tag-02

Abstract

   This document extends the DMARC (RFC7489) record format by defining
   an additional tag.  This new tag, the "fi" tag, is to be used in
   conjunction with the "ruf" tag used for message-specific failure
   reporting.  It provides a Domain Owner with a simple way of
   requesting limitation of the rate at which such reports are sent.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 17, 2017.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of




Davids                  Expires November 17, 2017               [Page 1]


Internet-Draft                  DMARC-fi                        May 2017


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Conventions Used In This Document . . . . . . . . . . . . . .   3
   3.  Extension to the General Record Format  . . . . . . . . . . .   3
   4.  Formal Definition . . . . . . . . . . . . . . . . . . . . . .   4
   5.  Domain Owner Example  . . . . . . . . . . . . . . . . . . . .   4
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .   6
   8.  Discussion  . . . . . . . . . . . . . . . . . . . . . . . . .   6
   9.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .   7
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .   7
     10.1.  Normative References . . . . . . . . . . . . . . . . . .   7
     10.2.  Informative References . . . . . . . . . . . . . . . . .   7
     10.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .   8
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   8

1.  Introduction

   DMARC [RFC7489] enables Domain Owners to request for detailed failure
   reports for individual messages by means of the "ruf" tag.  There may
   be various reasons to permanently configure such a "ruf" tag.  For
   example to facilitate reputation management, monitoring or simply for
   research or operational purposes.

   Failure reports are normally generated and sent almost immediately
   after the Mail Receiver detects a DMARC failure.  These reports are
   useful for quickly notifying the Domain Owners of an authentication
   failure, without waiting for an aggregate report.  However, under
   certain circumstances this property can potentially lead to an
   undesirably high volume of reports.  Especially when a Domain Owner's
   name is spoofed and abused in a large-scale phishing or other
   impersonation attack.

   DMARC [RFC7489] Section 7.3 leaves it to the discretion of
   participating Mail Receivers and report generators if and how they
   take measures against sending high volumes of failure reports.
   However, what a Mail Receiver or report generator considers
   acceptable may exceed the capacity of the receiving Domain Owner.
   The lack of a mechanism for a Domain Owner to influence the volume of
   reports sent by any particular report generator constitutes an
   obstacle to deployment of the "ruf" tag feature.

   This document updates [RFC7489] by defining the "fi" tag, a mechanism
   that allows the Domain Owner to request the limitation of failure



Davids                  Expires November 17, 2017               [Page 2]


Internet-Draft                  DMARC-fi                        May 2017


   reports of no more than one failure report per report generator per
   time interval and discard the remainder.

2.  Conventions Used In This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119] when they
   appear in ALL CAPS.  These words may also appear in this document in
   lower case as plain English words, absent their normative meanings.

   The following terms are used, as defined in DMARC [RFC7489].

   Domain Owner and Mail Receiver.

   Also the term "report generator" is applied here the same way as in
   DMARC [RFC7489].

3.  Extension to the General Record Format

   The following tag is introduced as an additional valid DMARC tag for
   use in conjunction with the Reporting URI for Failure ("ruf") tag:

   fi:
      Interval requested between message-specific failure reports
      (plain-text 32-bit unsigned integer; OPTIONAL; default is "60"; if
      defined as "0", then there is no rate limitation requested,
      thereby mimicking report generators that do not support this tag).
      Indicates a request to report generators to send message-specific
      failure reports at an interval of approximately the requested
      number of seconds.

   Any intermediate remaining reports SHOULD NOT be sent and MAY be
   discarded, if generated at all.  But discarding message-specific
   failure reports as a consequence of this tag, SHALL NOT affect the
   incident counts in the aggregated feedback reports.

   A report generator MAY include in the message-specific failure report
   an indication of the number of reports being discarded since the last
   issued report.  Where AFRF [RFC6650] is used, the Abuse Reporting
   Format [RFC5965] optional "Incidents"-field may be used for this
   purpose.

   Report generators that choose to adhere to the "ruf" tag option,
   SHOULD also adhere to the requested "fi" tag setting defined here.
   This tag's content SHALL be ignored if a "ruf" tag is not also
   specified, or if the syntax of the "fi" integer is invalid.




Davids                  Expires November 17, 2017               [Page 3]


Internet-Draft                  DMARC-fi                        May 2017


   Report generators that implement this feature MUST be able to support
   the entire interval range from 0-86400 and MAY support longer
   intervals.  However, anything longer dan 86400 is understood to be
   accommodated on a best-effort basis.

4.  Formal Definition

   The formal definition of the "fi" tag format, using ABNF [RFC5234],
   is as follows:

   Introduced:

                dmarc-finterval = "fi" *WSP "=" *WSP 1*DIGIT

   Which changes the dmarc-record definition to:

        dmarc-record    = dmarc-version dmarc-sep
                          [dmarc-request]
                          [dmarc-sep dmarc-srequest]
                          [dmarc-sep dmarc-auri]
                          [dmarc-sep dmarc-furi]
                          [dmarc-sep dmarc-adkim]
                          [dmarc-sep dmarc-aspf]
                          [dmarc-sep dmarc-ainterval]
                          [dmarc-sep dmarc-finterval]
                          [dmarc-sep dmarc-fo]
                          [dmarc-sep dmarc-rfmt]
                          [dmarc-sep dmarc-percent]
                          [dmarc-sep]
                          ; components other than dmarc-version and
                          ; dmarc-request may appear in any order

5.  Domain Owner Example

   The DMARC policy record with the "fi" tag might look like this when
   retrieved using a common command-line tool:

         % dig +short TXT _dmarc.example.com.
         "v=DMARC1; p=none; rua=mailto:dmarc-feedback@example.com;
          ruf=mailto:auth-reports@example.com; fi=300;"

   To publish such a record, the DNS administrator for the Domain Owner
   might create an entry like the following in the appropriate zone file
   (following the conventional zone file format):







Davids                  Expires November 17, 2017               [Page 4]


Internet-Draft                  DMARC-fi                        May 2017


    ; DMARC record for the domain example.com

    _dmarc  IN TXT ( "v=DMARC1; p=none; "
                     "rua=mailto:dmarc-feedback@example.com; "
                     "ruf=mailto:auth-reports@example.com; fi=300; " )

   The request implies that the Domain Owner is willing to accept no
   more than one message-specific failure report every 5 minutes from
   any report generator.  Any optionally defined indications for the
   maximum report size in the URI will continue to work as defined in
   [RFC7489].

   A report generator in this example would typically honour the "fi"
   tag by sending out a report, storing a 'last report sent' timestamp
   for example.com in memory and maintaining it as a 'do not sent' flag
   for a minimum of 300 seconds during which period no consecutive
   reports are to be sent.  After the flag has cleared, a report may
   again be sent.  The cycle then repeats.

   Intermediate, unsent reports are discarded.  But they do add to
   statistical counters as if they were sent.  So their details are part
   of any corresponding aggregated reports.

   In AFRF, a message-specific report to the Domain Owner may contain
   this output (some parts left out for readability):

               Feedback-Type: auth-failure
               User-Agent: SomeGenerator/1.0
               Version: 1.0
               Original-Mail-From: <somespammer@example.com>
               Source-IP: 2001:db8::198:51:100:25
               Auth-Failure: spf
               Reported-Domain: example.com
               Incidents: 600

   As a result of the DMARC record above, when a spammer sends two
   messages per second and fi=300, a report generator would produce only
   one message-specific failure report per 5 minutes, instead of 600.
   The "Incidents" field in the report shows that this report represents
   599 other incidents as well.  These will count in the daily
   aggregated feedback report, but where disregarded and not sent out as
   individual message-specific failure reports.

6.  IANA Considerations

   As per [RFC7489 p.17] Section 6.3 last paragraph, a new version of
   DMARC is not required.  Older implementations that consider the "fi"
   tag as unknown, will ignore it.



Davids                  Expires November 17, 2017               [Page 5]


Internet-Draft                  DMARC-fi                        May 2017


   However, this document requires an update to the IANA [RFC5226] DMARC
   Tag Registry [1]:

          Tag Name | Description
          ---------+---------------------------
          fi       | Failure Reporting interval

7.  Security Considerations

   The Domain Owner should be aware that defining a "fi" tag involves a
   trade-off between the benefit of preventing unmanageable incoming
   report flows and the risk of not receiving potentially useful data.
   A large scale attack that triggers reporting rate limitation, might
   result in the non-dispatch of reports regarding other events
   involving the same domain and the same Mail Receiver occuring at the
   same.

   An attack can involve many different report generators.  The Domain
   Owner should be aware that the "fi" tag limits reporting by each
   individual report generator.  Multiple report generators might still
   collectively generate a large volume of reports.  Mail Receivers with
   a farm or cluster of several report generators might choose to
   synchronise the 'last sent' timestamp value accross their machines in
   order to better comply with the wishes of Domain Owners and to reduce
   the risk described above.

   An attack can also involve multiple domains belonging to a single
   Domain Owner.  The "fi" tag applies to an individual domain, so the
   deliberate abuse of multiple spoofed domains belonging to Domain
   Owner, might still generate a high volumes of message-specific
   failure reports.

   It therefore makes sense to define a relatively short TTL for DMARC-
   records, to allow for the possibility of increasing the "fi"-value on
   an ad hoc basis, or to remove the "ruf" (and "fi") tag altogether in
   the event of a problem.  This aspect is also mentiond in [RFC7489
   p.40] Section 10.2, second paragraph.

   The security of the DMARC TXT-record, which the "fi" tag part of,
   depends on the security of the underlying DNS infrastructure.  In
   that respect it is advisable to make use of DNSSEC [RFC4033].

8.  Discussion

   The DMARC virtual verification draft [draft-akagiri-dmarc-virtual-
   verification] discusses possible values for the "ruf" tag.  The
   authors of that draft are kindly requested to take this draft into
   consideration as part of their discussions.



Davids                  Expires November 17, 2017               [Page 6]


Internet-Draft                  DMARC-fi                        May 2017


9.  Acknowledgments

   The author would like to thank Elizabeth Zwicky, Moritz Mueller,
   Maarten Wullink, Cristian Hesselman, Bart Knubben, Rolf Sonneveld and
   Murray Kucherawy for their valuable feedback.

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              DOI 10.17487/RFC5226, May 2008,
              <http://www.rfc-editor.org/info/rfc5226>.

   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <http://www.rfc-editor.org/info/rfc5234>.

   [RFC5965]  Shafranovich, Y., Levine, J., and M. Kucherawy, "An
              Extensible Format for Email Feedback Reports", RFC 5965,
              DOI 10.17487/RFC5965, August 2010,
              <http://www.rfc-editor.org/info/rfc5965>.

   [RFC6650]  Falk, J. and M. Kucherawy, Ed., "Creation and Use of Email
              Feedback Reports: An Applicability Statement for the Abuse
              Reporting Format (ARF)", RFC 6650, DOI 10.17487/RFC6650,
              June 2012, <http://www.rfc-editor.org/info/rfc6650>.

10.2.  Informative References

   [RFC4033]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "DNS Security Introduction and Requirements",
              RFC 4033, DOI 10.17487/RFC4033, March 2005,
              <http://www.rfc-editor.org/info/rfc4033>.

   [RFC7489]  Kucherawy, M., Ed. and E. Zwicky, Ed., "Domain-based
              Message Authentication, Reporting, and Conformance
              (DMARC)", RFC 7489, DOI 10.17487/RFC7489, March 2015,
              <http://www.rfc-editor.org/info/rfc7489>.





Davids                  Expires November 17, 2017               [Page 7]


Internet-Draft                  DMARC-fi                        May 2017


10.3.  URIs

   [1] https://www.iana.org/assignments/dmarc-parameters/dmarc-
       parameters.xhtml

Author's Address

   Marco Davids
   SIDN
   Meander 501
   Arnhem  6825 MD
   NL

   Phone: +31 26 352 5500
   Email: marco.davids@sidn.nl




































Davids                  Expires November 17, 2017               [Page 8]


Html markup produced by rfcmarkup 1.123, available from https://tools.ietf.org/tools/rfcmarkup/