[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01

Network Working Group                                    Martin Hamilton
INTERNET-DRAFT                                   Loughborough University
Updates: RFC 1864                                          February 1999


                     The Content-MD5-Origin: header

                draft-hamilton-content-md5-origin-01.txt


                          Status of This Memo

      This document is an Internet-Draft.  Internet-Drafts are working
      documents of the Internet Engineering Task Force (IETF), its
      areas, and its working groups.  Note that other groups may also
      distribute working documents as Internet-Drafts.

      Internet-Drafts are draft documents valid for a maximum of six
      months and may be updated, replaced, or obsoleted by other
      documents at any time.  It is inappropriate to use Internet-Drafts
      as reference material or to cite them other than as ``work in
      progress.''

      To learn the current status of any Internet-Draft, please check
      the ``1id-abstracts.txt'' listing contained in the Internet-Drafts
      Shadow Directories on ds.internic.net (US East Coast),
      nic.nordu.net (Europe), ftp.isi.edu (US West Coast), or
      munnari.oz.au (Pacific Rim).

      Distribution of this memo is unlimited.  Comments should be sent
      directly to the author.

      This Internet Draft expires 31st August 1999.

Abstract

   The Content-MD5: header specified in RFC 1864 has not been widely
   deployed, though this would be highly desirable for a number of
   reasons.  The author conjectures that this lack of usage is due at
   least in part to the requirement that only originating user agents
   may add a Content-MD5: header.  This proposal updates RFC 1864 to
   remove that requirement, and defines the header Content-MD5-Origin:
   for use by relaying hosts to indicate the point at which a Content-
   MD5: header was added.







                                                                [Page 1]


INTERNET-DRAFT                                             February 1999


1. Extending the scope of the Content-MD5: header

   RFC 1864 specifies that :-

        The Content-MD5 field is generated by only an originating
        user agent.  Message relays and gateways are expressly forbidden
        from generating a Content-MD5 field.

   Whilst understandable, this restriction means that the technology
   must be pushed out to very large numbers of end users before it can
   be useful for the Internet community as a whole.

   In order to maximize the deployment of the Content-MD5: header, it is
   essential that intermediate (relaying) systems be allowed to generate
   a Content-MD5: header, and that Content-MD5: headers may be generated
   for arbitrary message objects (rather than just leaf nodes of MIME
   objects).

   The rationale for extending the RFC 1864 definition of Content-MD5:
   is that in addition to the basic message integrity check function, it
   provides a very effective means of protection for messaging systems
   against a number of common problems, such as

     * loops - e.g. malfunctioning "vacation" programs or failure
         messages sent to mailing lists by broken server software

     * multiple submissions - where the same message is injected
         over and over again, e.g. due to broken user agent or
         server software

     * unsolicited bulk messaging - a special case of the above

   It should be noted that Content-MD5: is not a complete solution in
   itself.  For example, in some loop situations it is not uncommon for
   messages to include header information for diagnostic purposes.  This
   would likely render the Content-MD5: digest value useless, since it
   would be different for each of the looping messages.

2. Introducing Content-MD5-Origin:

   When a relaying host or system decides to create a Content-MD5:
   header, it should also add a Content-MD5-Origin: header, with its
   host name or Internet Protocol address as the right hand side.

   For example :-

      Content-MD5-Origin: plausible-deniability.lut.ac.uk




                                                                [Page 2]


INTERNET-DRAFT                                             February 1999


   or

      Content-MD5-Origin: [131.231.132.201]

   Note that Internet Protocol addresses should be encapsulated within
   square brackets, as in the second example above.

   Where a relaying host has multiple domain names and/or IP addresses
   (e.g. because it is multi-homed), any of these may be chosen
   arbitrarily.  Most messaging systems provide a way for the
   administrator to indicate a host's "canonical" domain name or IP
   address - this is usually a good choice for the value of the
   Content-MD5-Orgin: header.

3. Security considerations

   As noted in RFC 1864, Content-MD5: is no substitute for a strong
   cryptographic message integrity check.  In this context, however,
   there is no authentication element to consider - the value of the
   Content-MD5: header is simply being used as a "key", typically into a
   hash database which may be used to eliminate duplicate/unwanted
   messages.

   Implementations should take care not to assume that the value of the
   Content-MD5: header will always be 24 bytes or less - to avoid buffer
   overrun problems.  It would also be unwise to assume that the
   characters in an arbitrary Content-MD5: header will be chosen from
   the base64 character set mandated by RFC 1864.

   Relaying/receiving hosts should take care to check that the value
   supplied for the Content-MD5: header matches that calculated from a
   fresh iteration of the algorithm on the message.  Supplying a bogus
   Content-MD5: header which was different every time would be an easy
   way to subvert simple-minded implementations.  A future document may
   define a standard way for a relaying host to indicate that it has
   received an invalid Content-MD5: header.

4. Acknowledgements

   Thanks to Nathaniel Borenstein for comments and feedback.

5. References

   [1] Myers, J. and Rose, M.  "The Content-MD5 Header Field."  RFC
   1864, October 1995.






                                                                [Page 3]


INTERNET-DRAFT                                             February 1999


6. Author's address

   Martin Hamilton
   Department of Computer Science
   Loughborough University
   Leics. LE11 3TU, UK

   Email: martinh@gnu.org



               This Internet Draft expires 31st August 1999.







































                                                                [Page 4]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/