[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-carpenter-6man-uri-zoneid) 00 01 02 03 04 05 06 RFC 6874

6MAN                                                        B. Carpenter
Internet-Draft                                         Univ. of Auckland
Updates: 3986, 4007 (if approved)                              R. Hinden
Intended status: Standards Track                             Check Point
Expires: November 30, 2012                                  May 29, 2012


   Representing IPv6 Zone Identifiers in Uniform Resource Identifiers
                     draft-ietf-6man-uri-zoneid-01

Abstract

   This document describes how the Zone Identifier of an IPv6 scoped
   address can be represented in a Uniform Resource Identifier that
   includes a literal IPv6 address.  It updates RFC 3986 and RFC 4007.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 30, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.




Carpenter & Hinden      Expires November 30, 2012               [Page 1]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Specification . . . . . . . . . . . . . . . . . . . . . . . . . 4
   3.  Web Browsers  . . . . . . . . . . . . . . . . . . . . . . . . . 5
   4.  Security Considerations . . . . . . . . . . . . . . . . . . . . 5
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
   6.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 6
   7.  Change log [RFC Editor: Please remove]  . . . . . . . . . . . . 6
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 7
     8.1.  Normative References  . . . . . . . . . . . . . . . . . . . 7
     8.2.  Informative References  . . . . . . . . . . . . . . . . . . 7
   Appendix A.  Alternatives Considered  . . . . . . . . . . . . . . . 7
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 9





































Carpenter & Hinden      Expires November 30, 2012               [Page 2]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


1.  Introduction

   [RFC3986] defined how a literal IPv6 address can be represented in
   the "host" part of a Uniform Resource Identifier (URI).
   Subsequently, [RFC4007] extended the text representation of limited-
   scope IPv6 addresses such that a zone identifier may be concatenated
   to an address, for purposes described in that RFC.  Zone identifiers
   are especially useful in contexts where literal addresses are
   typically used, for example during fault diagnosis, when it may be
   essential to specify which interface is used for sending to a link
   local address.  It should be noted that zone identifiers have purely
   local meaning within the host where they are defined, and they are
   completely meaningless for any other host.  Today, they are only
   meaningful when attached to addresses with link local scope, but it
   is possible that other uses might be defined in the future.

   RFC 4007 does not specify how zone identifiers are to be represented
   in URIs.  Practical experience has shown that this feature is useful,
   in particular when using a web browser for debugging with link local
   addresses, but as it is undefined, it is not implemented consistently
   in URI parsers or in browsers.

   Some versions of some browsers accept the RFC 4007 syntax for scoped
   IPv6 addresses embedded in URIs, i.e., they have been coded to
   interpret the "%" sign according to RFC 4007 instead of RFC 3986.
   Clearly this approach is very convenient for users, although it
   formally breaches the syntax rules of RFC 3986.  The present document
   defines an alternative approach that respects and extends the rules
   of URI syntax.

   Thus, this document updates [RFC3986] by adding syntax to allow a
   zone identifier to be included in a literal IPv6 address within a
   URI.  It also clarifies some statements in [RFC4007].

   It should be noted that in other contexts than a user interface, a
   zone identifier is mapped into a numeric zone index or interface
   number.  The MIB textual convention [RFC4001] and the socket
   interface [RFC3493] define this as a 32 bit unsigned integer.  The
   mapping between the human-readable zone identifier string and the
   numeric value is a host-specific function that varies between
   operating systems.  The present document is concerned only with the
   human-readable string.

   Several alternative solutions were considered while this document was
   developed.  The Appendix briefly describes the alternatives and their
   advantages and disadvantages.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",



Carpenter & Hinden      Expires November 30, 2012               [Page 3]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].


2.  Specification

   According to RFC 4007, a zone identifier is attached to the textual
   representation of an IPv6 address by concatenating "%" followed by
   <zone_id>, where <zone_id> is a string identifying the zone of the
   address.  However, RFC 4007 gives no precise definition of the
   character set allowed in <zone_id>.  There are no rules or de facto
   standards for this.  For example, the first Ethernet interface in a
   host might be called %0, %1, %en1, %eth0, or whatever the implementer
   happened to choose.

   In a URI, a literal IPv6 address is always embedded between "[" and
   "]".  This document specifies how a <zone_id> can be appended to the
   address.  A <zone_id> SHOULD contain only ASCII characters classified
   in RFC 3986 as "unreserved", which conveniently excludes "]" in order
   to simplify parsing.

   Unfortunately "%" is always treated as an escape character in a URI,
   and according to RFC 3986 it MUST therefore itself be escaped in a
   URI, in the form "%25".  For this reason, "-" (hyphen) is used
   instead as the separator when a <zone_id> is included in a URI.
   Thus, the scoped address fe80::a%en1 would appear in a URI as
   http://[fe80::a-en1].

   If an operating system uses any other characters in zone or interface
   identifiers that are not in the "unreserved" character set, they MUST
   be escaped with a "%" sign according to RFC 3986.

   We now present the necessary formal syntax.

   In RFC 3986, the IPv6 literal format is formally defined in ABNF
   [RFC5234] by the following rule:

      IP-literal = "[" ( IPv6address / IPvFuture  ) "]"

   To provide support for a zone identifier, the existing syntax of
   IPv6address is retained, and a zone identifier may be added
   optionally to any literal address.  This allows flexibility for
   unknown future uses.  The rule quoted above from RFC 3986 is replaced
   by three rules:







Carpenter & Hinden      Expires November 30, 2012               [Page 4]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


      IP-literal = "[" ( IPv6addrz / IPvFuture  ) "]"

      ZoneID = 1*( unreserved / pct-encoded )

      IPv6addrz = IPv6address [ "-" ZoneID ]

   The rules in [RFC5952] SHOULD be applied in producing URIs.

   The 6man WG discussed and rejected an alternative in which the
   existing syntax of IPv6address would be extended by an option to add
   the ZoneID only for the case of link-local addresses.  It was felt
   that the present solution offers more flexibility for future uses and
   is more straightforward to implement.

   RFC 4007 offers guidance on how the ZoneID affects interface/address
   selection inside the IPv6 stack.  Note that the behaviour of an IPv6
   stack if passed a non-zero zone index for an address other than link-
   local is undefined.


3.  Web Browsers

   In recent years, web browsers have evolved considerably and now
   accept and parse many forms of input that are not a formal URI.
   Examples of this include host names, search items, bookmarks, search
   history, etc.  For example the Google Chrome browser now calls the
   "address bar" the "omnibox" [chrome].  The authors believe it is
   feasible, and very convenient for users, if browsers also allow (in
   addition to the formal URI syntax defined in this document) a
   syntax that will enable cut and paste.  For example:

     http://[fe80::a%en1]

   It seems that modern browsers can be adapted to parse this because it
   is inside of the "[" "]"'s.  This would permit the output of commands
   like ping6 -w ff02::1%en1 to be "cut and pasted" into a browser
   address bar.  Consequently this document recommends that browsers
   support this syntax in addition to the formal URI syntax defined
   above.


4.  Security Considerations

   The security considerations of [RFC3986] and [RFC4007] apply.  In
   particular, this URI format creates a specific pathway by which a
   deceitful zone index might be communicated, as mentioned in the final
   security consideration of RFC 4007.  It is emphasised that the format
   is intended only for debugging purposes, but of course this intention



Carpenter & Hinden      Expires November 30, 2012               [Page 5]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


   does not prevent misuse.

   To limit this risk, implementations SHOULD NOT allow use of this
   format except for well-defined usages such as sending to link local
   addresses under prefix fe80::/10.

   An HTTP server or proxy MUST ignore any ZoneID attached to an
   incoming URI, as it only has local significance at the sending host.


5.  IANA Considerations

   This document requests no action by IANA.


6.  Acknowledgements

   The lack of this format was first pointed out by Margaret Wasserman
   some years ago, and more recently by Kerry Lynn.  A previous draft
   document by Martin Duerst and Bill Fenner [I-D.fenner-literal-zone]
   discussed this topic but was not finalised.

   Valuable comments and contributions were made by Karl Auer, Carsten
   Bormann, Brian Haberman, Tatuya Jinmei, Tom Petch, Tomoyuki Sahara,
   Juergen Schoenwaelder, and Ole Troan.

   Brian Carpenter was a visitor at the Computer Laboratory, Cambridge
   University during part of this work.

   This document was produced using the xml2rfc tool [RFC2629].


7.  Change log [RFC Editor: Please remove]

   draft-ietf-6man-uri-zoneid-01: use "-" instead of %25, listed
   alternatives in Appendix, according to WG debate, added suggestion
   for browser developers, 2012-05-29.

   draft-ietf-6man-uri-zoneid-00: adopted by WG, fixed syntax to allow
   for % encoded characters, 2012-02-17.

   draft-carpenter-6man-uri-zoneid-01: chose Option 2, removed 15
   character limit, added explanation of ID/number mapping and other
   clarifications, 2012-02-08.

   draft-carpenter-6man-uri-zoneid-00: original version, 2011-12-07.





Carpenter & Hinden      Expires November 30, 2012               [Page 6]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC4007]  Deering, S., Haberman, B., Jinmei, T., Nordmark, E., and
              B. Zill, "IPv6 Scoped Address Architecture", RFC 4007,
              March 2005.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [RFC5952]  Kawamura, S. and M. Kawashima, "A Recommendation for IPv6
              Address Text Representation", RFC 5952, August 2010.

8.2.  Informative References

   [I-D.fenner-literal-zone]
              Fenner, B. and M. Duerst, "Formats for IPv6 Scope Zone
              Identifiers in Literal Address Formats",
              draft-fenner-literal-zone-02 (work in progress),
              October 2005.

   [RFC2629]  Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629,
              June 1999.

   [RFC3493]  Gilligan, R., Thomson, S., Bound, J., McCann, J., and W.
              Stevens, "Basic Socket Interface Extensions for IPv6",
              RFC 3493, February 2003.

   [RFC4001]  Daniele, M., Haberman, B., Routhier, S., and J.
              Schoenwaelder, "Textual Conventions for Internet Network
              Addresses", RFC 4001, February 2005.

   [chrome]   Google, "Use the address bar (omnibox)", 2012, <http://
              support.google.com/chrome/bin/answer.py?answer=95440>.


Appendix A.  Alternatives Considered






Carpenter & Hinden      Expires November 30, 2012               [Page 7]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


   1.  Leave the problem unsolved.

       This would mean that per-interface diagnostics would still have
       to be performed using ping or ping6:

       ping fe80::a%en1

       Advantage: works today.

       Disadvantage: less convenient than using a browser.

   2.  Simply using the percent character.

       http://[fe80::a%en1]

       Advantage: allows use of browser, allows cut and paste.

       Disadvantage: invalid syntax under RFC 3986; not acceptable to
       URI community.

   3.  Escaping the escape character as allowed by RFC 3986:

       http://[fe80::a%25en1]

       Advantage: allows use of browser.

       Disadvantage: ugly and confusing, doesn't allow simple cut and
       paste.

   4.  Alternative separator

       http://[fe80::a-en1]

       Advantage: allows use of browser, simple syntax

       Disadvantage: doesn't allow simple cut and paste.

       Note: the initial proposal for this choice was to use an
       underscore as the separator, but it was noted that this becomes
       effectively invisible when a user interface automatically
       underlines URLs.

   5.  With the "IPvFuture" syntax left open in RFC 3986:

       http://[v6.fe80::a_en1]

       Advantage: allows use of browser.




Carpenter & Hinden      Expires November 30, 2012               [Page 8]


Internet-Draft             IPv6 Zone ID in URI                  May 2012


       Disadvantage: ugly and redundant, doesn't allow simple cut and
       paste.


Authors' Addresses

   Brian Carpenter
   Department of Computer Science
   University of Auckland
   PB 92019
   Auckland,   1142
   New Zealand

   Email: brian.e.carpenter@gmail.com


   Robert M. Hinden
   Check Point Software Technologies, Inc.
   800 Bridge Parkway
   Redwood City, CA  94065
   US

   Email: bob.hinden@gmail.com




























Carpenter & Hinden      Expires November 30, 2012               [Page 9]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/