[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-jones-ace-cwt-proof-of-possession) 00 01 02 03 04 05 06 07 08 09 10 11

ACE                                                             M. Jones
Internet-Draft                                                 Microsoft
Intended status: Standards Track                                L. Seitz
Expires: April 20, 2020                                        RISE SICS
                                                             G. Selander
                                                             Ericsson AB
                                                              S. Erdtman
                                                                 Spotify
                                                           H. Tschofenig
                                                                Arm Ltd.
                                                        October 18, 2019


      Proof-of-Possession Key Semantics for CBOR Web Tokens (CWTs)
               draft-ietf-ace-cwt-proof-of-possession-09

Abstract

   This specification describes how to declare in a CBOR Web Token (CWT)
   (which is defined by RFC 8392) that the presenter of the CWT
   possesses a particular proof-of-possession key.  Being able to prove
   possession of a key is also sometimes described as being the holder-
   of-key.  This specification provides equivalent functionality to
   "Proof-of-Possession Key Semantics for JSON Web Tokens (JWTs)" (RFC
   7800) but using Concise Binary Object Representation (CBOR) and CWTs
   rather than JavaScript Object Notation (JSON) and JSON Web Tokens
   (JWTs).

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on April 20, 2020.







Jones, et al.            Expires April 20, 2020                 [Page 1]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Representations for Proof-of-Possession Keys  . . . . . . . .   3
     3.1.  Confirmation Claim  . . . . . . . . . . . . . . . . . . .   4
     3.2.  Representation of an Asymmetric Proof-of-Possession Key .   5
     3.3.  Representation of an Encrypted Symmetric Proof-of-
           Possession Key  . . . . . . . . . . . . . . . . . . . . .   6
     3.4.  Representation of a Key ID for a Proof-of-Possession Key    7
     3.5.  Specifics Intentionally Not Specified . . . . . . . . . .   8
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   8
   5.  Privacy Considerations  . . . . . . . . . . . . . . . . . . .   9
   6.  Operational Considerations  . . . . . . . . . . . . . . . . .   9
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
     7.1.  CBOR Web Token Claims Registration  . . . . . . . . . . .  11
       7.1.1.  Registry Contents . . . . . . . . . . . . . . . . . .  11
     7.2.  CWT Confirmation Methods Registry . . . . . . . . . . . .  11
       7.2.1.  Registration Template . . . . . . . . . . . . . . . .  11
       7.2.2.  Initial Registry Contents . . . . . . . . . . . . . .  12
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  12
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  12
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  13
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  14
   Document History  . . . . . . . . . . . . . . . . . . . . . . . .  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  16

1.  Introduction

   This specification describes how a CBOR Web Token (CWT) [RFC8392] can
   declare that the presenter of the CWT possesses a particular proof-
   of-possession (PoP) key.  Proof of possession of a key is also
   sometimes described as being the holder-of-key.  This specification



Jones, et al.            Expires April 20, 2020                 [Page 2]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   provides equivalent functionality to "Proof-of-Possession Key
   Semantics for JSON Web Tokens (JWTs)" [RFC7800] but using Concise
   Binary Object Representation (CBOR) [RFC7049] and CWTs [RFC8392]
   rather than JavaScript Object Notation (JSON) [RFC8259] and JSON Web
   Tokens (JWTs) [JWT].

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   This specification uses terms defined in the CBOR Web Token (CWT)
   [RFC8392], CBOR Object Signing and Encryption (COSE) [RFC8152], and
   Concise Binary Object Representation (CBOR) [RFC7049] specifications.

   These terms are defined by this specification:

   Issuer
      Party that creates the CWT and binds the claims about the subject
      to the proof-of-possession key.

   Presenter
      Party that proves possession of a private key (for asymmetric key
      cryptography) or secret key (for symmetric key cryptography) to a
      recipient of a CWT.
      In the context of OAuth, this party is also called the OAuth
      Client.

   Recipient
      Party that receives the CWT containing the proof-of-possession key
      information from the presenter.
      In the context of OAuth, this party is also called the OAuth
      Resource Server.

   This specification provides examples in CBOR extended diagnostic
   notation, as defined in Appendix G of [RFC8610].  The examples
   include line breaks for readability.

3.  Representations for Proof-of-Possession Keys

   By including a "cnf" (confirmation) claim in a CWT, the issuer of the
   CWT declares that the presenter possesses a particular key and that
   the recipient can cryptographically confirm that the presenter has
   possession of that key.  The value of the "cnf" claim is a CBOR map




Jones, et al.            Expires April 20, 2020                 [Page 3]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   (which is defined in Section 2.1 of [RFC7049]) and the members of
   that map identify the proof-of-possession key.

   The presenter can be identified in one of several ways by the CWT,
   depending upon the application requirements.  For instance, some
   applications may use the CWT "sub" (subject) claim [RFC8392], to
   identify the presenter.  Other applications may use the "iss" claim
   to identify the presenter.  In some applications, the subject
   identifier might be relative to the issuer identified by the "iss"
   (issuer) claim [RFC8392].  The actual mechanism used is dependent
   upon the application.  The case in which the presenter is the subject
   of the CWT is analogous to Security Assertion Markup Language (SAML)
   2.0 [OASIS.saml-core-2.0-os] SubjectConfirmation usage.

3.1.  Confirmation Claim

   The "cnf" claim in the CWT is used to carry confirmation methods.
   Some of them use proof-of-possession keys while others do not.  This
   design is analogous to the SAML 2.0 [OASIS.saml-core-2.0-os]
   SubjectConfirmation element in which a number of different subject
   confirmation methods can be included (including proof-of-possession
   key information).

   The set of confirmation members that a CWT must contain to be
   considered valid is context dependent and is outside the scope of
   this specification.  Specific applications of CWTs will require
   implementations to understand and process some confirmation members
   in particular ways.  However, in the absence of such requirements,
   all confirmation members that are not understood by implementations
   MUST be ignored.

   This specification establishes the IANA "CWT Confirmation Methods"
   registry for these members in Section 7.2 and registers the members
   defined by this specification.  Other specifications can register
   other members used for confirmation, including other members for
   conveying proof-of-possession keys using different key
   representations.

   The "cnf" claim value MUST represent only a single proof-of-
   possession key.  At most one of the "COSE_Key" and
   "Encrypted_COSE_Key" confirmation values defined in Figure 1 may be
   present.  Note that if an application needs to represent multiple
   proof-of-possession keys in the same CWT, one way for it to achieve
   this is to use other claim names, in addition to "cnf", to hold the
   additional proof-of-possession key information.  These claims could
   use the same syntax and semantics as the "cnf" claim.  Those claims
   would be defined by applications or other specifications and could be




Jones, et al.            Expires April 20, 2020                 [Page 4]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   registered in the IANA "CBOR Web Token Claims" registry
   [IANA.CWT.Claims].

   /--------------------+-----+-------------------------------\
   | Name               | Key | Value type                    |
   |--------------------+-----+-------------------------------|
   | COSE_Key           | 1   | COSE_Key                      |
   | Encrypted_COSE_Key | 2   | COSE_Encrypt or COSE_Encrypt0 |
   | kid                | 3   | binary string                 |
   \--------------------+-----+-------------------------------/

         Figure 1: Summary of the cnf names, keys, and value types

3.2.  Representation of an Asymmetric Proof-of-Possession Key

   When the key held by the presenter is an asymmetric private key, the
   "COSE_Key" member is a COSE_Key [RFC8152] representing the
   corresponding asymmetric public key.  The following example
   demonstrates such a declaration in the CWT Claims Set of a CWT:

     {
     /iss/ 1 : "coaps://server.example.com",
     /aud/ 3 : "coaps://client.example.org",
     /exp/ 4 : 1879067471,
     /cnf/ 8 :{
       /COSE_Key/ 1 :{
         /kty/ 1 : /EC2/ 2,
         /crv/ -1 : /P-256/ 1,
         /x/ -2 : h'd7cc072de2205bdc1537a543d53c60a6acb62eccd890c7fa27c9
                    e354089bbe13',
         /y/ -3 : h'f95e1d4b851a2cc80fff87d8e23f22afb725d535e515d020731e
                    79a3b4e47120'
        }
      }
    }

   The COSE_Key MUST contain the required key members for a COSE_Key of
   that key type and MAY contain other COSE_Key members, including the
   "kid" (Key ID) member.

   The "COSE_Key" member MAY also be used for a COSE_Key representing a
   symmetric key, provided that the CWT is encrypted so that the key is
   not revealed to unintended parties.  The means of encrypting a CWT is
   explained in [RFC8392].  If the CWT is not encrypted, the symmetric
   key MUST be encrypted as described in Section 3.3.  This procedure is
   equivalent to the one defined in section 3.3 of [RFC7800].





Jones, et al.            Expires April 20, 2020                 [Page 5]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


3.3.  Representation of an Encrypted Symmetric Proof-of-Possession Key

   When the key held by the presenter is a symmetric key, the
   "Encrypted_COSE_Key" member is an encrypted COSE_Key [RFC8152]
   representing the symmetric key encrypted to a key known to the
   recipient using COSE_Encrypt or COSE_Encrypt0.

   The following example illustrates a symmetric key that could
   subsequently be encrypted for use in the "Encrypted_COSE_Key" member:

     {
      /kty/ 1 : /Symmetric/ 4,
      /alg/ 3 : /HMAC256//256/ 5,
      /k/ -1 : h'6684523ab17337f173500e5728c628547cb37df
                 e68449c65f885d1b73b49eae1'
     }

   The COSE_Key representation is used as the plaintext when encrypting
   the key.

   The following example CWT Claims Set of a CWT illustrates the use of
   an encrypted symmetric key as the "Encrypted_COSE_Key" member value:

  {
   /iss/ 1 : "coaps://server.example.com",
   /sub/ 2 : "24400320",
   /aud/ 3: "s6BhdRkqt3",
   /exp/ 4 : 1311281970,
   /iat/ 5 : 1311280970,
   /cnf/ 8 : {
   /Encrypted_COSE_Key/ 2 : [
       /protected header/ h'A1010A' /{ \alg\ 1:10 \AES-CCM-16-64-128\}/,
       /unprotected header/ { / iv / 5: h'636898994FF0EC7BFCF6D3F95B'},
       /ciphertext/  h'0573318A3573EB983E55A7C2F06CADD0796C9E584F1D0E3E
                       A8C5B052592A8B2694BE9654F0431F38D5BBC8049FA7F13F'
     ]
    }
  }


   The example above was generated with the key:

             h'6162630405060708090a0b0c0d0e0f10'








Jones, et al.            Expires April 20, 2020                 [Page 6]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


3.4.  Representation of a Key ID for a Proof-of-Possession Key

   The proof-of-possession key can also be identified using a Key ID
   instead of communicating the actual key, provided the recipient is
   able to obtain the identified key using the Key ID.  In this case,
   the issuer of a CWT declares that the presenter possesses a
   particular key and that the recipient can cryptographically confirm
   proof of possession of the key by the presenter by including a "cnf"
   claim in the CWT whose value is a CBOR map with the CBOR map
   containing a "kid" member identifying the key.

   The following example demonstrates such a declaration in the CWT
   Claims Set of a CWT:

     {
      /iss/ 1 : "coaps://as.example.com",
      /aud/ 3 : "coaps://resource.example.org",
      /exp/ 4 : 1361398824,
      /cnf/ 8 : {
        /kid/ 3 : h'dfd1aa976d8d4575a0fe34b96de2bfad'
       }
     }

   The content of the "kid" value is application specific.  For
   instance, some applications may choose to use a cryptographic hash of
   the public key value as the "kid" value.

   Note that the use of a Key ID to identify a proof-of-possession key
   needs to be carefully circumscribed, as described below and in
   Section 6.  In cases where the Key ID is not a cryptographic value
   derived from the key or where not all of the parties involved are
   validating the cryptographic derivation, implementers should expect
   collisions, where different keys are assigned the same Key ID.
   Recipients of a CWT with a PoP key linked through only a Key ID
   should be prepared to handle such situations.

   In the world of constrained Internet of Things (IoT) devices, there
   is frequently a restriction on the size of Key IDs, either because of
   table constraints or a desire to keep message sizes small.

   Note that the value of a Key ID for a specific key is not necessarily
   the same for different parties.  When sending a COSE encrypted
   message with a shared key, the Key ID may be different on both sides
   of the conversation, with the appropriate one being included in the
   message based on the recipient of the message.






Jones, et al.            Expires April 20, 2020                 [Page 7]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


3.5.  Specifics Intentionally Not Specified

   Proof of possession is often demonstrated by having the presenter
   sign a value determined by the recipient using the key possessed by
   the presenter.  This value is sometimes called a "nonce" or a
   "challenge".  There are, however, also other means to demonstrate
   freshness of the exchange and to link the proof-of-possession key to
   the participating parties, as demonstrated by various authentication
   and key exchange protocols.

   The means of communicating the nonce and the nature of its contents
   are intentionally not described in this specification, as different
   protocols will communicate this information in different ways.
   Likewise, the means of communicating the signed nonce is also not
   specified, as this is also protocol specific.

   Note that other means of proving possession of the key exist, which
   could be used in conjunction with a CWT's confirmation key.
   Applications making use of such alternate means are encouraged to
   register them in the IANA "CWT Confirmation Methods" registry
   established in Section 7.2.

4.  Security Considerations

   All the security considerations that are discussed in [RFC8392] also
   apply here.  In addition, proof of possession introduces its own
   unique security issues.  Possessing a key is only valuable if it is
   kept secret.  Appropriate means must be used to ensure that
   unintended parties do not learn private key or symmetric key values.

   Applications utilizing proof of possession SHOULD also utilize
   audience restriction, as described in Section 3.1.3 of [RFC8392], as
   it provides additional protections.  Audience restriction can be used
   by recipients to reject messages intended for different recipients.
   (Of course, applications not using proof of possession can also
   benefit from using audience restriction to reject messages intended
   for different recipients.)

   CBOR Web Tokens with proof-of-possession keys are used in context of
   an architecture, such as the ACE OAuth Framework
   [I-D.ietf-ace-oauth-authz], in which protocols are used by a
   presenter to request these tokens and to subsequently use them with
   recipients.  Proof of possession only provides the intended security
   gains when the proof is known to be current and not subject to replay
   attacks; security protocols using mechanisms such as nonces and
   timestamps can be used to avoid the risk of replay when performing
   proof of possession for a token.  Note that a discussion of the




Jones, et al.            Expires April 20, 2020                 [Page 8]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   architecture or specific protocols that CWT proof-of-possession
   tokens are used with is beyond the scope of this specification.

   As is the case with other information included in a CWT, it is
   necessary to apply data origin authentication and integrity
   protection (via a keyed message digest or a digital signature).  Data
   origin authentication ensures that the recipient of the CWT learns
   about the entity that created the CWT since this will be important
   for any policy decisions.  Integrity protection prevents an adversary
   from changing any elements conveyed within the CWT payload.  Special
   care has to be applied when carrying symmetric keys inside the CWT
   since those not only require integrity protection but also
   confidentiality protection.

   As described in Section 6 (Key Identification) and Appendix D (Notes
   on Key Selection) of [JWS], it is important to make explicit trust
   decisions about the keys.  Proof-of-possession signatures made with
   keys not meeting the application's trust criteria MUST NOT be relied
   upon.

5.  Privacy Considerations

   A proof-of-possession key can be used as a correlation handle if the
   same key is used on multiple occasions.  Thus, for privacy reasons,
   it is recommended that different proof-of-possession keys be used
   when interacting with different parties.

6.  Operational Considerations

   The use of CWTs with proof-of-possession keys requires additional
   information to be shared between the involved parties in order to
   ensure correct processing.  The recipient needs to be able to use
   credentials to verify the authenticity and integrity of the CWT.
   Furthermore, the recipient may need to be able to decrypt either the
   whole CWT or the encrypted parts thereof (see Section 3.3).  This
   requires the recipient to know information about the issuer.
   Likewise, there needs to be agreement between the issuer and the
   recipient about the claims being used (which is also true of CWTs in
   general).

   When an issuer creates a CWT containing a Key ID claim, it needs to
   make sure that it does not issue another CWT with different claims
   containing the same Key ID within the lifetime of the CWTs, unless
   intentionally desired.  Failure to do so may allow one party to
   impersonate another party, with the potential to gain additional
   privileges.  A case where such reuse of a Key ID would be intentional
   is when a presenter obtains a CWT with different claims (e.g.,
   extended scope) for the same recipient, but wants to continue using



Jones, et al.            Expires April 20, 2020                 [Page 9]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   an existing security association (e.g., a DTLS session) bound to the
   key identified by the Key ID.  Likewise, if PoP keys are used for
   multiple different kinds of CWTs in an application and the PoP keys
   are identified by Key IDs, care must be taken to keep the keys for
   the different kinds of CWTs segregated so that an attacker cannot
   cause the wrong PoP key to be used by using a valid Key ID for the
   wrong kind of CWT.  Using an audience restriction for the CWT would
   be one strategy to mitigate this risk.

7.  IANA Considerations

   The following registration procedure is used for all the registries
   established by this specification.

   Values are registered on a Specification Required [RFC8126] basis
   after a three-week review period on the cwt-reg-review@ietf.org
   mailing list, on the advice of one or more Designated Experts.
   However, to allow for the allocation of values prior to publication,
   the Designated Experts may approve registration once they are
   satisfied that such a specification will be published.  [[ Note to
   the RFC Editor: The name of the mailing list should be determined in
   consultation with the IESG and IANA.  Suggested name: cwt-reg-
   review@ietf.org. ]]

   Registration requests sent to the mailing list for review should use
   an appropriate subject (e.g., "Request to Register CWT Confirmation
   Method: example").  Registration requests that are undetermined for a
   period longer than 21 days can be brought to the IESG's attention
   (using the iesg@ietf.org mailing list) for resolution.

   Designated Experts should determine whether a registration request
   contains enough information for the registry to be populated with the
   new values and whether the proposed new functionality already exists.
   In the case of an incomplete registration or an attempt to register
   already existing functionality, the Designated Experts should ask for
   corrections or reject the registration.

   It is suggested that multiple Designated Experts be appointed who are
   able to represent the perspectives of different applications using
   this specification in order to enable broadly informed review of
   registration decisions.  In cases where a registration decision could
   be perceived as creating a conflict of interest for a particular
   Expert, that Expert should defer to the judgment of the other
   Experts.







Jones, et al.            Expires April 20, 2020                [Page 10]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


7.1.  CBOR Web Token Claims Registration

   This specification registers the "cnf" claim in the IANA "CBOR Web
   Token Claims" registry [IANA.CWT.Claims] established by [RFC8392].

7.1.1.  Registry Contents

   o  Claim Name: "cnf"
   o  Claim Description: Confirmation
   o  JWT Claim Name: "cnf"
   o  Claim Key: TBD (maybe 8)
   o  Claim Value Type(s): map
   o  Change Controller: IESG
   o  Specification Document(s): Section 3.1 of [[ this document ]]

7.2.  CWT Confirmation Methods Registry

   This specification establishes the IANA "CWT Confirmation Methods"
   registry for CWT "cnf" member values.  The registry records the
   confirmation method member and a reference to the specification that
   defines it.

7.2.1.  Registration Template

   Confirmation Method Name:
      The human-readable name requested (e.g., "kid").

   Confirmation Method Description:
      Brief description of the confirmation method (e.g., "Key
      Identifier").

   JWT Confirmation Method Name:
      Claim Name of the equivalent JWT confirmation method value, as
      registered in [IANA.JWT.Claims].  CWT claims should normally have
      a corresponding JWT claim.  If a corresponding JWT claim would not
      make sense, the Designated Experts can choose to accept
      registrations for which the JWT Claim Name is listed as "N/A".

   Confirmation Key:
      CBOR map key value for the confirmation method.

   Confirmation Value Type(s):
      CBOR types that can be used for the confirmation method value.

   Change Controller:
      For Standards Track RFCs, list the "IESG".  For others, give the
      name of the responsible party.




Jones, et al.            Expires April 20, 2020                [Page 11]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   Specification Document(s):
      Reference to the document or documents that specify the parameter,
      preferably including URIs that can be used to retrieve copies of
      the documents.  An indication of the relevant sections may also be
      included but is not required.  Note that the Designated Experts
      and IANA must be able to obtain copies of the specification
      document(s) to perform their work.

7.2.2.  Initial Registry Contents

   o  Confirmation Method Name: "COSE_Key"
   o  Confirmation Method Description: COSE_Key Representing Public Key
   o  JWT Confirmation Method Name: "jwk"
   o  Confirmation Key: 1
   o  Confirmation Value Type(s): COSE_Key structure
   o  Change Controller: IESG
   o  Specification Document(s): Section 3.2 of [[ this document ]]

   o  Confirmation Method Name: "Encrypted_COSE_Key"
   o  Confirmation Method Description: Encrypted COSE_Key
   o  JWT Confirmation Method Name: "jwe"
   o  Confirmation Key: 2
   o  Confirmation Value Type(s): COSE_Encrypt or COSE_Encrypt0
      structure (with an optional corresponding COSE_Encrypt or
      COSE_Encrypt0 tag)
   o  Change Controller: IESG
   o  Specification Document(s): Section 3.3 of [[ this document ]]

   o  Confirmation Method Name: "kid"
   o  Confirmation Method Description: Key Identifier
   o  JWT Confirmation Method Name: "kid"
   o  Confirmation Key: 3
   o  Confirmation Value Type(s): binary string
   o  Change Controller: IESG
   o  Specification Document(s): Section 3.4 of [[ this document ]]

8.  References

8.1.  Normative References

   [IANA.CWT.Claims]
              IANA, "CBOR Web Token Claims",
              <http://www.iana.org/assignments/cwt>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.



Jones, et al.            Expires April 20, 2020                [Page 12]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   [RFC7049]  Bormann, C. and P. Hoffman, "Concise Binary Object
              Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049,
              October 2013, <https://www.rfc-editor.org/info/rfc7049>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8152]  Schaad, J., "CBOR Object Signing and Encryption (COSE)",
              RFC 8152, DOI 10.17487/RFC8152, July 2017,
              <https://www.rfc-editor.org/info/rfc8152>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8392]  Jones, M., Wahlstroem, E., Erdtman, S., and H. Tschofenig,
              "CBOR Web Token (CWT)", RFC 8392, DOI 10.17487/RFC8392,
              May 2018, <https://www.rfc-editor.org/info/rfc8392>.

8.2.  Informative References

   [I-D.ietf-ace-oauth-authz]
              Seitz, L., Selander, G., Wahlstroem, E., Erdtman, S., and
              H. Tschofenig, "Authentication and Authorization for
              Constrained Environments (ACE) using the OAuth 2.0
              Framework (ACE-OAuth)", draft-ietf-ace-oauth-authz-21
              (work in progress), February 2019.

   [IANA.JWT.Claims]
              IANA, "JSON Web Token Claims",
              <http://www.iana.org/assignments/jwt>.

   [JWS]      Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
              2015, <http://www.rfc-editor.org/info/rfc7515>.

   [JWT]      Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
              <http://www.rfc-editor.org/info/rfc7519>.

   [OASIS.saml-core-2.0-os]
              Cantor, S., Kemp, J., Philpott, R., and E. Maler,
              "Assertions and Protocol for the OASIS Security Assertion
              Markup Language (SAML) V2.0", OASIS Standard saml-core-
              2.0-os, March 2005,
              <http://docs.oasis-open.org/security/saml/v2.0/>.



Jones, et al.            Expires April 20, 2020                [Page 13]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   [RFC7800]  Jones, M., Bradley, J., and H. Tschofenig, "Proof-of-
              Possession Key Semantics for JSON Web Tokens (JWTs)",
              RFC 7800, DOI 10.17487/RFC7800, April 2016,
              <https://www.rfc-editor.org/info/rfc7800>.

   [RFC8259]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", STD 90, RFC 8259,
              DOI 10.17487/RFC8259, December 2017,
              <https://www.rfc-editor.org/info/rfc8259>.

   [RFC8610]  Birkholz, H., Vigano, C., and C. Bormann, "Concise Data
              Definition Language (CDDL): A Notational Convention to
              Express Concise Binary Object Representation (CBOR) and
              JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610,
              June 2019, <https://www.rfc-editor.org/info/rfc8610>.

Acknowledgements

   Thanks to the following people for their reviews of the
   specification: Roman Danyliw, Christer Holmberg, Benjamin Kaduk, Yoav
   Nir, Michael Richardson, and Jim Schaad.

   Ludwig Seitz and Goeran Selander worked on this document as part of
   the CelticPlus projects CyberWI and CRITISEC, with funding from
   Vinnova.

Document History

   [[ to be removed by the RFC Editor before publication as an RFC ]]

   -09

   o  Addressed Gen-ART review comments by Christer Holmberg and SecDir
      review comments by Yoav Nir.

   -08

   o  Addressed remaining Area Director review comments by Benjamin
      Kaduk.

   -07

   o  Addressed Area Director review by Benjamin Kaduk.

   -06

   o  Corrected nits identified by Roman Danyliw.




Jones, et al.            Expires April 20, 2020                [Page 14]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


   -05

   o  Added text suggested by Jim Schaad describing considerations when
      using the Key ID confirmation method.

   -04

   o  Addressed additional WGLC comments by Jim Schaad and Roman
      Danyliw.

   -03

   o  Addressed review comments by Jim Schaad, see https://www.ietf.org/
      mail-archive/web/ace/current/msg02798.html

   o  Removed unnecessary sentence in the introduction regarding the use
      any strings that could be case-sensitive.

   o  Clarified the terms Presenter and Recipient.

   o  Clarified text about the confirmation claim.

   -02

   o  Changed "typically" to "often" when describing ways of performing
      proof of possession.

   o  Changed b64 to hex encoding in an example.

   o  Changed to using the RFC 8174 boilerplate instead of the RFC 2119
      boilerplate.

   -01

   o  Now uses CBOR diagnostic notation for the examples.

   o  Added a table summarizing the "cnf" names, keys, and value types.

   o  Addressed some of Jim Schaad's feedback on -00.

   -00

   o  Created the initial working group draft from draft-jones-ace-cwt-
      proof-of-possession-01.







Jones, et al.            Expires April 20, 2020                [Page 15]


Internet-Draft      Proof-of-Possession Key for CWTs        October 2019


Authors' Addresses

   Michael B. Jones
   Microsoft

   Email: mbj@microsoft.com
   URI:   http://self-issued.info/


   Ludwig Seitz
   RISE SICS
   Scheelevaegen 17
   Lund  223 70
   Sweden

   Email: ludwig@ri.se


   Goeran Selander
   Ericsson AB
   Faeroegatan 6
   Kista  164 80
   Sweden

   Email: goran.selander@ericsson.com


   Samuel Erdtman
   Spotify

   Email: erdtman@spotify.com


   Hannes Tschofenig
   Arm Ltd.
   Hall in Tirol  6060
   Austria

   Email: Hannes.Tschofenig@arm.com












Jones, et al.            Expires April 20, 2020                [Page 16]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/