[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-decnodder-ancp-mib-an) 00 01 02 03 04 05 06 07 08 09 10 11 12

Network Working Group                                      S. De Cnodder
Internet-Draft                                            Alcatel-Lucent
Intended status: Standards Track                          M. Morgenstern
Expires: October 30, 2008                               ECI Telecom Ltd.
                                                          April 28, 2008


    Access Node Control Protocol (ANCP) MIB module for Access Nodes
                     draft-ietf-ancp-mib-an-02.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on October 30, 2008.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols.  In particular it defines
   objects for managing access nodes that are using the Access Node
   Control Protocol (ANCP).










De Cnodder & Morgenstern  Expires October 30, 2008              [Page 1]


Internet-Draft                  ANCP MIB                      April 2008


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  3
   3.  Conventions  . . . . . . . . . . . . . . . . . . . . . . . . .  3
   4.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
   5.  Structure of the MIB Module  . . . . . . . . . . . . . . . . .  4
     5.1.  Textual Conventions  . . . . . . . . . . . . . . . . . . .  4
     5.2.  The ANCP MIB module Subtree  . . . . . . . . . . . . . . .  4
     5.3.  The Notifications Subtree  . . . . . . . . . . . . . . . .  4
     5.4.  The Table Structures . . . . . . . . . . . . . . . . . . .  4
   6.  Relationship to Other MIB Modules  . . . . . . . . . . . . . .  6
     6.1.  Relationship to the Interfaces Group MIB module  . . . . .  6
     6.2.  MIB modules required for IMPORTS . . . . . . . . . . . . .  6
   7.  ANCP MIB Definitions for the Access Node . . . . . . . . . . .  6
   8.  Security Considerations  . . . . . . . . . . . . . . . . . . . 29
   9.  IANA considerations  . . . . . . . . . . . . . . . . . . . . . 34
   10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 34
   11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 34
     11.1. Normative References . . . . . . . . . . . . . . . . . . . 34
     11.2. Informative References . . . . . . . . . . . . . . . . . . 35
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 35
   Intellectual Property and Copyright Statements . . . . . . . . . . 37




























De Cnodder & Morgenstern  Expires October 30, 2008              [Page 2]


Internet-Draft                  ANCP MIB                      April 2008


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols.  In particular it defines
   objects for managing access nodes as described in [ANCPFW] that are
   using the Access Node Control Protocol defined in [ANCPPR].


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies MIB
   modules that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].


3.  Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].


4.  Overview

   In [ANCPFW], the framework for the Access Node Control Protocol
   (ANCP) is described.  It defines 2 network entities, the Access Node
   (AN) and the Network Access Server (NAS), between which ANCP sessions
   are established.  The detailed protocol specification of ANCP is
   described in [ANCPPR].  This document specifies a MIB module for an
   AN that supports ANCP, and a MIB module that defines textual
   conventions.

   Note: the current MIB definition is specific for [ANCPPR].  If
   [ANCPPR] gets updated later, then the MIB definition in this document
   will also follow these changes.







De Cnodder & Morgenstern  Expires October 30, 2008              [Page 3]


Internet-Draft                  ANCP MIB                      April 2008


5.  Structure of the MIB Module

5.1.  Textual Conventions

   Two new textual convention, GsmpSubVersion and
   AncpSessionCapabilities, are defined in a seperate MIB module in this
   document.  The ANCP specification in [ANCPPR] is re-using the GSMP
   specification in [RFC3292] where the GSMP subversion is introduced.
   The textual conventions defined in this document complement the
   textual conventions defined in [RFC3295], GsmpVersion, GsmpNameType,
   and GsmpPartitionIdType, which are also used in the ANCP MIB module
   for ANs.  These textual conventions are used for the convenience of
   humans reading the MIB.

5.2.  The ANCP MIB module Subtree

   ANCP-TC-MIB is the first MIB module defined in this document, and
   this MIB module defines ancpMIB under mib-2.  ANCP-TC-MIB is put
   under ancpMIB, as well as ANCP-AN-MIB, the second MIB module defined
   in this document.

5.3.  The Notifications Subtree

   Notifications are defined to inform the management station about
   state changes of ANCP sessions, whenever an ANCP session changes
   state.  Two notifications are defined for this purpose.  The
   notification ancpAnSessionUp is to inform the management station when
   the session comes up, and the notification ancpAnSessionDown is to
   inform when the ANCP session is down again after it was up before.

   Attributes are introduced to enable and disable the generation of
   these notifications per ANCP session.  No other special measures for
   congestion avoidance for the notifications are needed because the
   number of ANCP sessions in an access node is typically small.  In
   addition, establishing an ANCP session and tearing down it again,
   takes some time such that for a particular ANCP session, not many
   notifications in a short time period can be generated.

5.4.  The Table Structures

   The ANCP MIB module for the AN has 3 tables.  The tables are the
   following:

   o  ancpAnSessionConfigTable

      This table is used to configure ANCP sessions at the AN towards a
      specific NAS.  The NAS is identified by a number of attributes in
      this table (ancpAnSessionConfigNasIpAddressType and



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 4]


Internet-Draft                  ANCP MIB                      April 2008


      ancpAnSessionConfigNasIpAddress).  The other attributes in this
      table can be used to configure properties that are specific for
      that particular ANCP session.  Also the interface to which the
      ANCP session is bound, is also configured in this table.  This
      interface can be an IP interface, an ATM PVC, a VLAN (or VLAN
      stack), or any other interface defined in IF-MIB.

   o  ancpAnCurrentSessionTable

      This table shows the operational state of a particular ANCP
      session.  Each session configured in ancpAnSessionConfigTable has
      a corresponding row in ancpAnCurrentSessionTable.  When a session
      is configured or deleted in the ancpAnSessionConfigTable, then the
      corresponding row of that session in the ancpAnCurrentSessionTable
      is, respectively, automatically created or deleted.

   o  ancpAnInterfaceConfigTable

      This table is used to assign interfaces to particular partitions
      if partitions are being used as indicated by the scalar
      ancpAnPartitionsUsed.  When partitions are used, a row in this
      table is created automatically when an interface is created in the
      ifTable of the IF- MIB [RFC2863] for which the system supports
      ANCP.

   Four groups are defined:

   o  ancpAnConfigGroup

      This group contains all objects of the ancpAnSessionConfigTable in
      which the ANCP sessions are configured in the access node.

   o  ancpAnCurrentGroup

      This group contains all objects of the ancpAnCurrentSessionTable
      where the operational state and other information of the ANCP
      sessions are shown.

   o  ancpAnInterfaceGroup

      This group contains all objects to configure interfaces to be used
      by ANCP.  Assigning interfaces to particular partitions is part of
      this group in case partitions are used.

   o  ancpAnNotificationsGroup

      This group contains the notifications that indicate state changes
      of ANCP sessions.



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 5]


Internet-Draft                  ANCP MIB                      April 2008


6.  Relationship to Other MIB Modules

6.1.  Relationship to the Interfaces Group MIB module

   There is a dependency between the ANCP MIB module and the Interfaces
   Group MIB (IF-MIB) defined in [RFC2863].  The ifIndex defined in the
   ifTable of IF-MIB is used as the index of the
   ancpAnInterfaceConfigTable defined in the ANCP MIB module for access
   nodes.  Each time that an entry is created in the ifTable for which
   the system supports ANCP (e.g., in a DSLAM this is typically for each
   DSL line), a row is created automatically in the
   ancpAnInterfaceConfigTable if partitions are being used.

6.2.  MIB modules required for IMPORTS

   The ANCP TC MIB module requires following MIB modules for IMPORTS:

   o  SNMPv2-SMI defined in [RFC2578]
   o  SNMPv2-TC defined in [RFC2579]

   The ANCP MIB module for access nodes requires following MIB modules
   for IMPORTS:

   o  SNMPv2-SMI defined in [RFC2578]
   o  RMON2-MIB defined in [RFC4502]
   o  IF-MIB defined in [RFC2863]
   o  INET-ADDRESS-MIB defined in [RFC4001]
   o  SNMPv2-CONF defined in [RFC2580]
   o  GSMP-MIB defined in [RFC3295]
   o  SNMPv2-TC defined in [RFC2579]
   o  Q-BRIDGE-MIB defined in [RFC4363]
   o  ANCP-TC-MIB defined in this document


7.  ANCP MIB Definitions for the Access Node

ANCP-TC-MIB DEFINITIONS ::= BEGIN

IMPORTS
       MODULE-IDENTITY, OBJECT-IDENTITY,
       Unsigned32, mib-2
            FROM SNMPv2-SMI                            -- [RFC2578]

       TEXTUAL-CONVENTION
            FROM SNMPv2-TC;                            -- [RFC2579]

ancpTcMIB MODULE-IDENTITY
       LAST-UPDATED "200804270000Z" -- 27 April 2008



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 6]


Internet-Draft                  ANCP MIB                      April 2008


       ORGANIZATION "IETF ANCP Working Group"
       CONTACT-INFO
              " Editors:

                        Stefaan De Cnodder
                        Alcatel-Lucent
                Postal: Copernicuslaan 50
                        B-2018 Antwerp
                        Belgium
                EMail:  stefaan.de_cnodder@alcatel-lucent.be
                Phone:  +32 3 240 85 15

                        Moti Morgenstern
                        ECI Telecom Ltd.
                Postal: 30 Hasivim St.
                        Petach Tikva 49517,
                        Israel
                Email:  moti.morgenstern@ecitele.com
                Phone:  +972 3 926 6258
              "
       DESCRIPTION
           "This MIB module provides Textual Conventions to be
            used by MIB modules for AN and NAS that are implementing
            the Access Node Control Protocol (ANCP).

            Copyright (C) The IETF Trust (2008).  The initial version of
            this MIB module was published in RFC yyyy; for full legal
            notices see the RFC itself."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
       REVISION "200804270000Z" -- 27 April 2008
       DESCRIPTION "Initial version as published in RFC yyyy."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
       ::= { ancpMIB 1 }

ancpMIB OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
              "The OID assigned to ANCP MIB module assigned by IANA."
        ::= { mib-2 xxx }
-- The value xxx to be assigned by IANA.

--
-- Textual Conventions
--

GsmpSubVersion ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 7]


Internet-Draft                  ANCP MIB                      April 2008


             "The subversion numbers defined for the GSMP protocol."
       SYNTAX     Unsigned32

AncpSessionCapabilities ::= TEXTUAL-CONVENTION
       STATUS current
       DESCRIPTION
             "ANCP capabilities supported by the AN.
              The following capabilities are available:
                 topologyDiscovery (0)- Access Topology Discovery
                 lineConfig (1)       - Line Configuration
                 multicast (2)        - Multicast
                 l2Oam (3)            - Layer 2 OAM
              A bit set means the associated capability is supported."
       SYNTAX BITS {
                     topologyDiscovery (0),
                     lineConfig (1),
                     multicast (2),
                     l2Oam (3)
                   }
END

ANCP-AN-MIB DEFINITIONS ::= BEGIN

IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE,
       Unsigned32, TimeTicks,zeroDotZero,
       NOTIFICATION-TYPE
            FROM SNMPv2-SMI                            -- [RFC2578]
       ZeroBasedCounter32
            FROM RMON2-MIB                             -- [RFC4502]
       InterfaceIndex, ifIndex       FROM IF-MIB       -- [RFC2863]
       InetAddressType, InetAddress, InetPortNumber
            FROM INET-ADDRESS-MIB                      -- [RFC4001]
       MODULE-COMPLIANCE, OBJECT-GROUP,
       NOTIFICATION-GROUP
            FROM SNMPv2-CONF                           -- [RFC2580]
       GsmpVersion, GsmpNameType, GsmpPartitionIdType
            FROM GSMP-MIB                              -- [RFC3295]
       RowStatus, TruthValue, RowPointer
            FROM SNMPv2-TC                             -- [RFC2579]
       VlanIdOrNone
            FROM Q-BRIDGE-MIB                          -- [RFC4363]
       GsmpSubVersion, AncpSessionCapabilities,
       ancpMIB
            FROM ANCP-TC-MIB;                     -- [This document]

ancpAnMIB MODULE-IDENTITY
       LAST-UPDATED "200804270000Z" -- 27 April 2008



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 8]


Internet-Draft                  ANCP MIB                      April 2008


       ORGANIZATION "IETF ANCP Working Group"
       CONTACT-INFO
              " Editors:

                        Stefaan De Cnodder
                        Alcatel-Lucent
                Postal: Copernicuslaan 50
                        B-2018 Antwerp
                        Belgium
                EMail:  stefaan.de_cnodder@alcatel-lucent.be
                Phone:  +32 3 240 85 15

                        Moti Morgenstern
                        ECI Telecom Ltd.
                Postal: 30 Hasivim St.
                        Petach Tikva 49517,
                        Israel
                Email:  moti.morgenstern@ecitele.com
                Phone:  +972 3 926 6258
              "
       DESCRIPTION
           "The MIB module for entities implementing the access node
            side of the Access Node Control Protocol (ANCP).

            Copyright (C) The IETF Trust (2008).  The initial version of
            this MIB module was published in RFC yyyy; for full legal
            notices see the RFC itself."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
       REVISION "200804270000Z" -- 27 April 2008
       DESCRIPTION "Initial version as published in RFC yyyy."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
       ::= { ancpMIB 2 }

ancpAnNotifications              OBJECT IDENTIFIER ::= { ancpAnMIB 0 }
ancpAnObjects                    OBJECT IDENTIFIER ::= { ancpAnMIB 1 }
ancpAnConformance                OBJECT IDENTIFIER ::= { ancpAnMIB 2 }

--
-- Global ANCP Control Parameters
--
-- The following scalar parameters globally control the behavior
-- of the ANCP implementation
--

ancpAnPartitionsUsed OBJECT-TYPE

       SYNTAX         TruthValue
       MAX-ACCESS     read-write



De Cnodder & Morgenstern  Expires October 30, 2008              [Page 9]


Internet-Draft                  ANCP MIB                      April 2008


       STATUS         current
       DESCRIPTION
             "This object allows the manager to specify whether or not
              to use the 'Partition ID' field in the GSMP message
              header.  When set to 'false' the application does not
              use partitions and the ancpAnSessionConfigPartitionId
              object MUST be zero for all sessions.  In addition, rows
              SHOULD not be created in the ancpAnInterfaceConfigTable.
              When set to 'true' the application uses partitions and
              the ancpAnSessionConfigPartitionId object MUST be set,
              for every session, to a nonzero value.  In such a case,
              rows are created in ancpAnInterfaceConfigTable.  The
              default value zero in ancpAnInterfaceConfigPartitionId
              object means that the operator did not associate the
              interface with a particular partition.  Note that
              modifying the value of this object is restricted.
              E.g., prior to setting it from 'true' to 'false'
              ancpAnSessionConfigRowStatus objects for all sessions
              should be set to notInService and the partition ID value
              MUST be set to zero.
              The value of this object is persistent."
       DEFVAL { false }
       ::= { ancpAnObjects 1 }

--
-- Configuration of ANCP Sessions
--

ancpAnNextSessionId OBJECT-TYPE
       SYNTAX     Unsigned32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The object reports the next index (potential value of
              ancpAnSessionConfigSessionId) which is available for
              creating a new row in ancpAnSessionConfigTable.
              If no such value is available (e.g., the table is full or
              any other reason) the object reports '0' (zero).
              An available value V becomes unavailable when a row is
              actually created with ancpAnSessionConfigSessionId=V and
              until then consecutive GET commands with this object may
              return the same value V. Note that eventually only one row
              creation with the value V can succeed.
              An unavailable value V becomes available again when a row
              with ancpAnSessionConfigSessionId=V in
              ancpAnSessionConfigTable is deleted."
       ::= { ancpAnObjects 2 }




De Cnodder & Morgenstern  Expires October 30, 2008             [Page 10]


Internet-Draft                  ANCP MIB                      April 2008


ancpAnSessionConfigTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AncpAnSessionConfigEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "This table represents the ANCP sessions in the access
              node. An entry in this table needs to be configured
              (created) before an ANCP session might be started."
       ::= { ancpAnObjects 3 }

ancpAnSessionConfigEntry OBJECT-TYPE
       SYNTAX     AncpAnSessionConfigEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "An entry in the table showing the data for a
              specific actual or yet to be established session.
              If partitions are used, one session corresponds to
              one specific access node partition."
       INDEX { ancpAnSessionConfigSessionId }
       ::= { ancpAnSessionConfigTable 1 }

AncpAnSessionConfigEntry ::= SEQUENCE {
       ancpAnSessionConfigSessionId           Unsigned32,
       ancpAnSessionConfigRowStatus           RowStatus,
       ancpAnSessionConfigGsmpVersion         GsmpVersion,
       ancpAnSessionConfigGsmpSubVersion      GsmpSubVersion,
       ancpAnSessionConfigEncapsulationType   INTEGER,
       ancpAnSessionConfigCapabilities        AncpSessionCapabilities,
       ancpAnSessionConfigAliveTimer          Unsigned32,
       ancpAnSessionConfigPortReportShaper    Unsigned32,
       ancpAnSessionConfigAggregateReportShaper  Unsigned32,
       ancpAnSessionConfigTransportRetryTimer Unsigned32,
       ancpAnSessionConfigAncpRetryTimer      Unsigned32,
       ancpAnSessionConfigAnName              GsmpNameType,
       ancpAnSessionConfigPartitionId         GsmpPartitionIdType,
       ancpAnSessionConfigWindowSize          Unsigned32,
       ancpAnSessionConfigRelatedInterface    InterfaceIndex,
       ancpAnSessionConfigRelatedEntity       RowPointer,
       ancpAnSessionConfigSvid                VlanIdOrNone,
       ancpAnSessionConfigSPrio               Unsigned32,
       ancpAnSessionConfigCvid                VlanIdOrNone,
       ancpAnSessionConfigCPrio               Unsigned32,
       ancpAnSessionConfigNasIpAddressType    InetAddressType,
       ancpAnSessionConfigNasIpAddress        InetAddress,
       ancpAnSessionConfigEncapPortNumber     InetPortNumber,
       ancpAnSessionConfigNotifyDnEnable      TruthValue,
       ancpAnSessionConfigNotifyUpEnable      TruthValue



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 11]


Internet-Draft                  ANCP MIB                      April 2008


}

ancpAnSessionConfigSessionId OBJECT-TYPE
       SYNTAX     Unsigned32 (1..255)
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "An index of a session referred by this row. The index
              is unique accross all partitions.
              The referred session may be actually established or
              just potential.
              Prior to creating a row in the table it is advised to
              check the ancpAnNextSessionId for an available index."
       ::= { ancpAnSessionConfigEntry 1 }

ancpAnSessionConfigRowStatus OBJECT-TYPE
       SYNTAX     RowStatus
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "An object that allows entries in this table to
              be created, modified and deleted using the RowStatus
              convention.
              A SET operation to any other attribute in this row, when
              this object is set to 'active' (1), MUST be rejected with
              an SNMP error (e.g., inconsistentValue).
              In order to perform a SET operation to any other attribute
              in this table the manager MUST set this object to
              notInService (2). After setting the object back to
              'active' the implementation MAY tear down the session and
              recreate it, depending on what session attributes have
              been modified. "
       ::= { ancpAnSessionConfigEntry 2 }

ancpAnSessionConfigGsmpVersion OBJECT-TYPE
       SYNTAX     GsmpVersion
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The maximum version number of the GSMP protocol that
              may be used in this session. The value of this object
              is persistent."
       DEFVAL { 3 }
       ::= { ancpAnSessionConfigEntry 3 }

ancpAnSessionConfigGsmpSubVersion OBJECT-TYPE
       SYNTAX     GsmpSubVersion
       MAX-ACCESS read-create



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 12]


Internet-Draft                  ANCP MIB                      April 2008


       STATUS     current
       DESCRIPTION
             "The maximum subversion number of the GSMP protocol that
              may be used in this session. The value of this object
              is persistent."
       DEFVAL { 1 }
       ::= { ancpAnSessionConfigEntry 4 }

ancpAnSessionConfigEncapsulationType OBJECT-TYPE
       SYNTAX INTEGER {
                  tcp(1)
              }
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "Required encapsulation for this session. The value of
              this object is persistent."
       DEFVAL { tcp }
       ::= { ancpAnSessionConfigEntry 5 }

ancpAnSessionConfigCapabilities OBJECT-TYPE
       SYNTAX     AncpSessionCapabilities
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "ANCP capabilities supported by the AN in this session.
              When all bits are set to zero then this means that no
              capabilities are supported. The value of this object
              is persistent."
       DEFVAL { { topologyDiscovery, l2Oam } }
       ::= { ancpAnSessionConfigEntry 6 }

ancpAnSessionConfigAliveTimer OBJECT-TYPE
       SYNTAX     Unsigned32(1..255)
       UNITS      "deciseconds"
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The timer specifies the nominal time between periodic
              adjacency protocol messages generated by the access node.
              It is a constant for the duration of an ANCP session. The
              timer is specified in units of 100ms. The value of this
              object is persistent."
       DEFVAL { 100 }
       ::= { ancpAnSessionConfigEntry 7 }

ancpAnSessionConfigPortReportShaper OBJECT-TYPE
       SYNTAX     Unsigned32(1..255)



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 13]


Internet-Draft                  ANCP MIB                      April 2008


       UNITS      "deciseconds"
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The timer specifies the nominal time between
              2 EventReport messages related to the same port.
              It is a constant for the duration of a GSMP session.
              The timer is specified in units of 100ms. The value
              of this object is persistent."
       DEFVAL { 10 }
       ::= { ancpAnSessionConfigEntry 8 }

ancpAnSessionConfigAggregateReportShaper OBJECT-TYPE
       SYNTAX     Unsigned32(1..2550)
       UNITS      "centiseconds"
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The timer specifies the nominal time between
              2 EventReport messages related to any port.
              It is a constant for the duration of a GSMP session.
              The timer is specified in units of 10ms. The value
              of this object is persistent."
       DEFVAL { 10 }
       ::= { ancpAnSessionConfigEntry 9 }

ancpAnSessionConfigTransportRetryTimer OBJECT-TYPE
       SYNTAX     Unsigned32(0..255)
       UNITS      "deciseconds"
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The timer specifies the nominal time between 2 transport
              connection setup attempts done by the access node.
              The transport protocol is specified in
              ancpAnSessionConfigEncapsulationType.
              The timer is specified in units of 100ms.
              A value 0 means that the access node will NOT
              initiate nor setup the transport connection. The
              value of this object is persistent."
       DEFVAL { 10 }
       ::= { ancpAnSessionConfigEntry 10 }

ancpAnSessionConfigAncpRetryTimer OBJECT-TYPE
       SYNTAX     Unsigned32(0..255)
       UNITS      "deciseconds"
       MAX-ACCESS read-create
       STATUS     current



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 14]


Internet-Draft                  ANCP MIB                      April 2008


       DESCRIPTION
             "The timer specifies the nominal time between
              2 ANCP connection setup attempts.
              The timer is specified in units of 100ms.
              A value 0 means that the access node will NOT
              spontaneously trigger an ANCP session.
              Whatever the setting of this timer, the access
              node shall always listen for ANCP session setup.
              The value of this object is persistent."
       DEFVAL { 10 }
       ::= { ancpAnSessionConfigEntry 11 }

ancpAnSessionConfigAnName OBJECT-TYPE
       SYNTAX     GsmpNameType
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The name of the access node. The first three octets must
              be an Organizationally Unique Identifier (OUI) that
              identifies the manufacturer of the access node. This
              object can be (one of) the MAC address(es) of the access
              node on the network side.
              When set to zero, the access node shall autonomously
              decide on using the most appropriate MAC address of the
              access node. Then the actually used access node name can
              be read from ancpAnCurrentSessionAnName.
              The value of this object is persistent."
       DEFVAL { '000000000000'H }
       ::= { ancpAnSessionConfigEntry 12 }

ancpAnSessionConfigPartitionId OBJECT-TYPE
       SYNTAX     GsmpPartitionIdType
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The Id for this session's specific access node partition.
              This object has a meaning only if partitions are used
              (ancpAnPartitionsUsed='true') and is ignored
              otherwise.
              The value of this object is persistent."
       DEFVAL { '00'H }
       ::= { ancpAnSessionConfigEntry 13 }

ancpAnSessionConfigWindowSize OBJECT-TYPE
       SYNTAX     Unsigned32(1..65535)
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 15]


Internet-Draft                  ANCP MIB                      April 2008


             "The maximum number of unacknowledged request messages
              that may be transmitted by the controller without the
              possibility of loss. This field is used to prevent
              request messages from being lost in the access node
              because of overflow in the receive buffer. The field is
              a hint to the controller. The value of this object is
              persistent."
       DEFVAL { 10 }
       ::= { ancpAnSessionConfigEntry 14 }

   ancpAnSessionConfigRelatedInterface OBJECT-TYPE
       SYNTAX      InterfaceIndex
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "This object contains the value of an ifIndex object,
              defined in IF-MIB, indicating an interface corresponding
              to this session.
              The corresponding interface might be either physical
              or logical (e.g., IP Interface).
              The value of this object is persistent."
       ::= { ancpAnSessionConfigEntry 15 }

   ancpAnSessionConfigRelatedEntity OBJECT-TYPE
       SYNTAX      RowPointer
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "This object contains the name of an object instance
              uniquely identifying a lower layer entity associated
              with this session.  For example, in the case where
              the session is associated with an ATM VCC, this object
              might be set to an object identifier uniquely identifying
              that VCC (e.g., an object instance in atmVclTable).
              If unused, this object MUST have the value zeroDotZero.
              The value of this object is persistent."
       DEFVAL { zeroDotZero }
       ::= { ancpAnSessionConfigEntry 16 }

   ancpAnSessionConfigSvid OBJECT-TYPE
       SYNTAX      VlanIdOrNone
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "If the session is associated with a single VLAN, this
              object contains the VLAN ID of the single VLAN tag. If
              ancpAnSessionConfigCvid is also nonzero then the session
              is associated with two VLAN tags, S-VLAN tag and C-VLAN



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 16]


Internet-Draft                  ANCP MIB                      April 2008


              tag, then this object contains the VLAN ID of the S-VLAN
              tag (the outer VLAN tag). In both cases the value of this
              object SHOULD be nonzero.
              If the session is not associated with any VLAN, this
              object MUST have the default value 0.
              The value of this object is persistent."
       DEFVAL       { 0 }
       ::= { ancpAnSessionConfigEntry 17 }

   ancpAnSessionConfigSPrio OBJECT-TYPE
       SYNTAX      Unsigned32(0..7 | 65535)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "If the session is associated with a single VLAN, this
              object contains the priority value of the single VLAN tag.
              If ancpAnSessionConfigCvid is also nonzero then the
              session is associated with two VLAN tags, S-VLAN tag and
              C-VLAN tag, then this object contains the priority value
              of the S-VLAN tag (the priority value of the outer VLAN
              tag). In both cases the value of this object SHOULD be in
              the range 0 to 7 inclusive.
              If the session is not associated with any VLAN, this
              object MUST have the default value 65535.
              The value of this object is persistent."
       DEFVAL       { 65535 }
       ::= { ancpAnSessionConfigEntry 18 }

   ancpAnSessionConfigCvid OBJECT-TYPE
       SYNTAX      VlanIdOrNone
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "If the session is associated with two VLANs, has both
              S-VLAN tag and C-VLAN tag, this object contains the VLAN
              ID of the inner VLAN tag (also called C-VLAN ID). In such
              a case the value of this object SHOULD be nonzero.
              If the session is not associated with any VLAN or if it
              is associated with a single VLAN, this object MUST
              have the default value 0.
              The value of this object is persistent."
       DEFVAL       { 0 }
       ::= { ancpAnSessionConfigEntry 19 }

   ancpAnSessionConfigCPrio OBJECT-TYPE
       SYNTAX      Unsigned32(0..7 | 65535)
       MAX-ACCESS  read-create
       STATUS      current



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 17]


Internet-Draft                  ANCP MIB                      April 2008


       DESCRIPTION
             "If the session is associated with two VLANs, has both
              S-VLAN tag and C-VLAN tag, this object contains the
              priority value of the inner VLAN tag (also called C-VLAN
              priority). In such a case the value of this object SHOULD
              be in the range 0 to 7 inclusive.
              If the session is not associated with any VLAN or if it
              is associated with a single VLAN, this object MUST have
              the default value 65535.
              The value of this object is persistent."
       DEFVAL       { 65535 }
       ::= { ancpAnSessionConfigEntry 20 }

ancpAnSessionConfigNasIpAddressType OBJECT-TYPE
       SYNTAX     InetAddressType
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The type of address in ancpAnSessionConfigNasIpAddress.
              The value of this object is persistent."
       ::= { ancpAnSessionConfigEntry 21 }

ancpAnSessionConfigNasIpAddress OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The IP address used for the ANCP session peer (NAS).
              The type of this IP address attribute is determined
              by the value of ancpAnSessionConfigNasIpAddressType.
              The value of this object is persistent."
       ::= { ancpAnSessionConfigEntry 22 }

ancpAnSessionConfigEncapPortNumber OBJECT-TYPE
       SYNTAX     InetPortNumber (1..65535)
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "The port number used for the transport protocol
              establishment to the ANCP peer. The transport
              protocol type is specified by
              ancpAnSessionConfigEncapsulationType and as
              it is set by default to 'tcp' then the default
              port number is set to 6068 (see details in
              http://www.iana.org/). Other port numbers may
              be relevant if other transport protocols are used.
              The value of this object is persistent."
       DEFVAL { 6068 }



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 18]


Internet-Draft                  ANCP MIB                      April 2008


       ::= { ancpAnSessionConfigEntry 23 }

ancpAnSessionConfigNotifyDnEnable OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "This object specifies if ancpAnSessionDown
              notification should be generated when this session
              leaves the 'estab' state as given by
              ancpAnCurrentSessionState in the corresponding row
              in ancpAnCurrentSessionTable.
              The value of this object is persistent."
       DEFVAL { false }
       ::= { ancpAnSessionConfigEntry 24 }

ancpAnSessionConfigNotifyUpEnable OBJECT-TYPE
       SYNTAX     TruthValue
       MAX-ACCESS read-create
       STATUS     current
       DESCRIPTION
             "This object specifies if ancpAnSessionUp
              notification should be generated when this session
              goes to 'estab' state as given by
              ancpAnCurrentSessionState in the corresponding row
              in ancpAnCurrentSessionTable.
              The value of this object is persistent."
       DEFVAL { false }
       ::= { ancpAnSessionConfigEntry 25 }

--
-- Operational Information of ANCP Sessions
--

ancpAnCurrentSessionTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AncpAnCurrentSessionEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "This table gives actual information of the sessions
              in the access node.
              A row in this table is created when the corresponding row
              in the ancpAnSessionConfigTable is created.
              A row in this table is deleted when the corresponding row
              in the ancpAnSessionConfigTable is deleted."
       ::= { ancpAnObjects 4 }

ancpAnCurrentSessionEntry OBJECT-TYPE



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 19]


Internet-Draft                  ANCP MIB                      April 2008


       SYNTAX     AncpAnCurrentSessionEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "An entry in the table showing the data for a
              specific actual session."
       INDEX { ancpAnSessionConfigSessionId }
       ::= { ancpAnCurrentSessionTable 1 }

AncpAnCurrentSessionEntry ::= SEQUENCE {
       ancpAnCurrentSessionState              INTEGER,
       ancpAnCurrentSessionGsmpVersion        GsmpVersion,
       ancpAnCurrentSessionGsmpSubVersion     GsmpSubVersion,
       ancpAnCurrentSessionAnName             GsmpNameType,
       ancpAnCurrentSessionNasName            GsmpNameType,
       ancpAnCurrentSessionAnIpAddressType    InetAddressType,
       ancpAnCurrentSessionAnIpAddress        InetAddress,
       ancpAnCurrentSessionAnInstance         Unsigned32,
       ancpAnCurrentSessionNasInstance        Unsigned32,
       ancpAnCurrentSessionCapabilities       AncpSessionCapabilities,
       ancpAnCurrentSessionStartUptime        TimeTicks,
       ancpAnCurrentSessionDiscontinuityTime  TimeTicks,
       ancpAnCurrentSessionStatSentMessages   ZeroBasedCounter32,
       ancpAnCurrentSessionStatReceivedValidMessages ZeroBasedCounter32,
       ancpAnCurrentSessionStatDiscardedMessages     ZeroBasedCounter32
}

ancpAnCurrentSessionState OBJECT-TYPE
       SYNTAX     INTEGER {
                      null(1),
                      synsent(2),
                      synrcvd(3),
                      estab(4)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The state of this session.
              The null (1) state is returned if the proper
              encapsulation data is not yet configured, if the row is
              not in active status or if the session is in NULL state
              as defined in the GSMP specification."
       ::= { ancpAnCurrentSessionEntry 1 }

ancpAnCurrentSessionGsmpVersion OBJECT-TYPE
       SYNTAX     GsmpVersion
       MAX-ACCESS read-only
       STATUS     current



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 20]


Internet-Draft                  ANCP MIB                      April 2008


       DESCRIPTION
             "The actual version number of the GSMP protocol that
              is used in this session.
              This object has value 0 if ancpAnCurrentSessionState is
              not estab(4)."
       ::= { ancpAnCurrentSessionEntry 2 }

ancpAnCurrentSessionGsmpSubVersion OBJECT-TYPE
       SYNTAX     GsmpSubVersion
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The actual subversion number of the GSMP protocol that
              may be used in this session.
              This object has value 0 if ancpAnCurrentSessionState is
              not estab(4)."
       ::= { ancpAnCurrentSessionEntry 3 }

ancpAnCurrentSessionAnName OBJECT-TYPE
       SYNTAX     GsmpNameType
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The name of the access node used in this session.
              It should be the same as ancpAnSessionConfigAnName if that
              object is not set to zero.  If ancpAnSessionConfigAnName
              is set to zero, then this object will contain the MAC
              address selected by the access node as described in the
              description of ancpAnSessionConfigAnName.
              The value of this object is used as value for the
              'Sender Name' field in the header of the ANCP messages
              generated for this session by the AN."
       ::= { ancpAnCurrentSessionEntry 4 }

ancpAnCurrentSessionNasName OBJECT-TYPE
       SYNTAX     GsmpNameType
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The name of the NAS as advertised in the adjacency
              message.
              The value of this object is set to the value of the
              'Sender Name' field in the header of the ANCP messages
              received on this session.  This object has value 0 if
              ancpAnCurrentSessionState is not estab(4)."
       ::= { ancpAnCurrentSessionEntry 5 }

ancpAnCurrentSessionAnIpAddressType OBJECT-TYPE



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 21]


Internet-Draft                  ANCP MIB                      April 2008


       SYNTAX     InetAddressType
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The type of address in ancpAnCurrentSessionAnIpAddress."
       ::= { ancpAnCurrentSessionEntry 6 }

ancpAnCurrentSessionAnIpAddress OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The IP address used for the access node.
              The type of this IP address attribute is determined
              by the value of ancpAnCurrentSessionAnIpAddressType."
       ::= { ancpAnCurrentSessionEntry 7 }

ancpAnCurrentSessionAnInstance OBJECT-TYPE
       SYNTAX     Unsigned32(0..16777215)
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The instance number used by the access node during this
              session. The Instance number is a 24-bit number
              that should be guaranteed to be unique within
              the recent past and to change when the link
              or node comes back up after going down. Zero is
              not a valid instance number.
              This object has value 0 if ancpAnCurrentSessionState is
              not estab(4)."
       ::= { ancpAnCurrentSessionEntry 8 }

ancpAnCurrentSessionNasInstance OBJECT-TYPE
       SYNTAX     Unsigned32(0..16777215)
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The instance number used by the NAS during this
              session. The Instance number is a 24-bit number
              that should be guaranteed to be unique within
              the recent past and to change when the link
              or node comes back up after going down.
              This object has value 0 if ancpAnCurrentSessionState is
              not estab(4)."
       ::= { ancpAnCurrentSessionEntry 9 }

ancpAnCurrentSessionCapabilities OBJECT-TYPE
       SYNTAX     AncpSessionCapabilities



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 22]


Internet-Draft                  ANCP MIB                      April 2008


       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The common ANCP capabilities supported by the AN and
              NAS in this session.
              The object has the value 0 if no capabilities are
              supported
              or if ancpAnCurrentSessionState is not estab(4)."
       ::= { ancpAnCurrentSessionEntry 10 }

ancpAnCurrentSessionStartUptime OBJECT-TYPE
       SYNTAX     TimeTicks
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The value of sysUpTime when the session came to
              established state.
              This object has value 0 if ancpAnCurrentSessionState is
              not estab(4)."
       ::= { ancpAnCurrentSessionEntry 11 }

ancpAnCurrentSessionDiscontinuityTime OBJECT-TYPE
       SYNTAX     TimeTicks
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The value of sysUpTime on the most recent occasion at
              which session's counters suffered a discontinuity.
              If no such discontinuities have occurred since then,
              this object contains the same value as
              ancpAnCurrentSessionStartUptime."
       ::= { ancpAnCurrentSessionEntry 12 }

ancpAnCurrentSessionStatSentMessages OBJECT-TYPE
       SYNTAX     ZeroBasedCounter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The number of messages that have been sent in this session
              by the access node.
              All ANCP messages pertaining to this session after
              the session came to established state shall
              be counted, also including adjacency protocol messages
              and failure response messages.
              Discontinuities of this counter are indicated by
              ancpAnCurrentSessionDiscontinuityTime."
       ::= { ancpAnCurrentSessionEntry 13 }




De Cnodder & Morgenstern  Expires October 30, 2008             [Page 23]


Internet-Draft                  ANCP MIB                      April 2008


ancpAnCurrentSessionStatReceivedValidMessages OBJECT-TYPE
       SYNTAX     ZeroBasedCounter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The number of messages that have been received and
              processed in this session by the access node.
              All ANCP messages pertaining to this session after
              the session came to established state shall
              be counted, also including adjacency protocol messages
              and failure response messages.
              Discontinuities of this counter are indicated by
              ancpAnCurrentSessionDiscontinuityTime."
       ::= { ancpAnCurrentSessionEntry 14 }

ancpAnCurrentSessionStatDiscardedMessages OBJECT-TYPE
       SYNTAX     ZeroBasedCounter32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
             "The number of messages that in this session have been
              received and discarded for whatever reason by the access
              node.
              All ANCP messages pertaining to this session after
              the session came to established state shall
              be counted, also including adjacency protocol messages
              and failure response messages.
              Discontinuities of this counter are indicated by
              ancpAnCurrentSessionDiscontinuityTime."
       ::= { ancpAnCurrentSessionEntry 15 }

--
-- Partitions
--

ancpAnInterfaceConfigTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AncpAnInterfaceConfigEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "This table configures the association of user facing
              interfaces to ANCP partitions in the access node.
              An entry in this table needs to be added by the agent
              for each relevant user facing interface with the value
              of ancpAnInterfaceConfigPartitionId set to zero at the
              time of the creation of the row. A relevant user facing
              interface is created whenever a row is created in the
              ifTable of the IF-MIB that can be controlled by ANCP.



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 24]


Internet-Draft                  ANCP MIB                      April 2008


              When such an interface is deleted from the ifTable, the
              corresponding row in this table has to be removed by the
              agent.
              Rows should only be created by the agent when
              ancpAnPartitionsUsed is set to 'true'.  If no
              partitions are used, then no rows should be created in
              this table."
       ::= { ancpAnObjects 5 }

ancpAnInterfaceConfigEntry OBJECT-TYPE
       SYNTAX     AncpAnInterfaceConfigEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
             "An entry in the table showing the partition id for a
              specific user facing interface"
       INDEX { ifIndex }
       ::= { ancpAnInterfaceConfigTable 1 }

AncpAnInterfaceConfigEntry ::= SEQUENCE {
       ancpAnInterfaceConfigPartitionId         GsmpPartitionIdType
}

ancpAnInterfaceConfigPartitionId OBJECT-TYPE
       SYNTAX     GsmpPartitionIdType
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION
             "A partition Id associated with the related ifIndex.
              Upon creation of the row, the value is set to '00'H.
              The value of this object is persistent."
       DEFVAL { '00'H }
       ::= { ancpAnInterfaceConfigEntry 1 }

--
-- Notifications
--

ancpAnSessionDown NOTIFICATION-TYPE
       OBJECTS {
                 ancpAnCurrentSessionAnIpAddressType,
                 ancpAnCurrentSessionAnIpAddress,
                 ancpAnSessionConfigNasIpAddressType,
                 ancpAnSessionConfigNasIpAddress,
                 ancpAnCurrentSessionAnInstance,
                 ancpAnCurrentSessionNasInstance,
                 ancpAnCurrentSessionStartUptime,
                 ancpAnCurrentSessionDiscontinuityTime,



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 25]


Internet-Draft                  ANCP MIB                      April 2008


                 ancpAnCurrentSessionStatSentMessages,
                 ancpAnCurrentSessionStatReceivedValidMessages,
                 ancpAnCurrentSessionStatDiscardedMessages
               }
       STATUS current
       DESCRIPTION
             "This notification is generated whenever an ANCP session
              goes down.  A session can go down for several reasons:
              1) The ANCP session can be deleted by a manager from the
                 ancpAnSessionConfigTable, and hence it will also be
                 removed from the ancpAnCurrentSessionTable.
              2) The session can go operational down due to some
                 malfunction in the network, the AN, or the NAS.  In
                 this case, the ANCP session will be still in the
                 ancpAnSessionConfigTable and ancpAnCurrentSessionTable,
                 but the ancpAnCurrentSessionState moves from the estab
                 state to another state.
              This notification is only generated when
              ancpAnSessionConfigNotifyDnEnable of this session is set
              to true."
       ::= { ancpAnNotifications 1 }

ancpAnSessionUp NOTIFICATION-TYPE
       OBJECTS {
                 ancpAnCurrentSessionAnInstance
               }
       STATUS current
       DESCRIPTION
            "This notification is generated when an ANCP session enters
             the estab state as given by ancpAnCurrentSessionState.
             Since ancpAnCurrentSessionAnInstance identifies the ANCP
             session uniquely the other attributes can be derived from
             this attribute.
             This notification is only generated when
             ancpAnSessionConfigNotifyUpEnable of this session is set
             to true."
       ::= { ancpAnNotifications 2 }

--
-- ANCP AN Compliance
--

ancpAnGroups            OBJECT IDENTIFIER ::= { ancpAnConformance 1 }
ancpAnCompliances       OBJECT IDENTIFIER ::= { ancpAnConformance 2 }

ancpAnModuleCompliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 26]


Internet-Draft                  ANCP MIB                      April 2008


             "The compliance statement for agents that support
              the ANCP MIB module for access nodes."
       MODULE -- this module
       MANDATORY-GROUPS {
                          ancpAnConfigGroup,
                          ancpAnCurrentGroup,
                          ancpAnInterfaceGroup,
                          ancpAnNotificationsGroup
                        }
       ::= { ancpAnCompliances 1 }

-- units of conformance

ancpAnConfigGroup OBJECT-GROUP
       OBJECTS {
                  ancpAnNextSessionId,
                  ancpAnSessionConfigRowStatus,
                  ancpAnSessionConfigGsmpVersion,
                  ancpAnSessionConfigGsmpSubVersion,
                  ancpAnSessionConfigEncapsulationType,
                  ancpAnSessionConfigCapabilities,
                  ancpAnSessionConfigAliveTimer,
                  ancpAnSessionConfigPortReportShaper,
                  ancpAnSessionConfigAggregateReportShaper,
                  ancpAnSessionConfigTransportRetryTimer,
                  ancpAnSessionConfigAncpRetryTimer,
                  ancpAnSessionConfigAnName,
                  ancpAnSessionConfigPartitionId,
                  ancpAnSessionConfigWindowSize,
                  ancpAnSessionConfigNasIpAddressType,
                  ancpAnSessionConfigNasIpAddress,
                  ancpAnSessionConfigEncapPortNumber,
                  ancpAnSessionConfigNotifyDnEnable,
                  ancpAnSessionConfigNotifyUpEnable
               }
       STATUS current
       DESCRIPTION
             "These objects apply to the configuration of ANCP
              sessions in access nodes."
       ::= { ancpAnGroups 1 }

ancpAnRelatedInterfaceGroup OBJECT-GROUP
       OBJECTS {
                  ancpAnSessionConfigRelatedInterface
               }
       STATUS current
       DESCRIPTION
             "This object contains the ifIndex of an interface defined



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 27]


Internet-Draft                  ANCP MIB                      April 2008


              in IF-MIB. If an ANCP session must be associated with an
              IP interface, then this group must be supported. This
              group also must be supported together with the
              ancpAnRelatedEntityGroup in case the ANCP session is to
              be associated with an ATM PVC."
       ::= { ancpAnGroups 2 }

ancpAnRelatedEntityGroup OBJECT-GROUP
       OBJECTS {
                  ancpAnSessionConfigRelatedEntity
               }
       STATUS current
       DESCRIPTION
             "This object contains the name of an object instance
              uniquely identifying a lower layer entity. If an ANCP
              session must be associated with an ATM PVC, then this
              group together with ancpAnRelatedInterfaceGroup must be
              supported."
       ::= { ancpAnGroups 3 }

ancpAnRelatedVlanGroup OBJECT-GROUP
       OBJECTS {
                 ancpAnSessionConfigSvid,
                 ancpAnSessionConfigSPrio,
                 ancpAnSessionConfigCvid,
                 ancpAnSessionConfigCPrio
               }
       STATUS current
       DESCRIPTION
             "These objects contains all VLAN related configuration when
              the ANCP session is associated with a particular VLAN. If
              an ANCP session must be associated with a VLAN (or VLAN
              stack), then this group must be supported."
       ::= { ancpAnGroups 4 }

ancpAnCurrentGroup OBJECT-GROUP
       OBJECTS {
                  ancpAnCurrentSessionState,
                  ancpAnCurrentSessionGsmpVersion,
                  ancpAnCurrentSessionGsmpSubVersion,
                  ancpAnCurrentSessionAnName,
                  ancpAnCurrentSessionNasName,
                  ancpAnCurrentSessionAnIpAddressType,
                  ancpAnCurrentSessionAnIpAddress,
                  ancpAnCurrentSessionAnInstance,
                  ancpAnCurrentSessionNasInstance,
                  ancpAnCurrentSessionCapabilities,
                  ancpAnCurrentSessionStartUptime,



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 28]


Internet-Draft                  ANCP MIB                      April 2008


                  ancpAnCurrentSessionDiscontinuityTime,
                  ancpAnCurrentSessionStatSentMessages,
                  ancpAnCurrentSessionStatReceivedValidMessages,
                  ancpAnCurrentSessionStatDiscardedMessages
               }
       STATUS current
       DESCRIPTION
             "These objects show the operational state of all ANCP
              sessions configured in the access node."
       ::= { ancpAnGroups 5 }

ancpAnInterfaceGroup OBJECT-GROUP
       OBJECTS {
                  ancpAnPartitionsUsed,
                  ancpAnInterfaceConfigPartitionId
               }
       STATUS current
       DESCRIPTION
             "These objects are used to assign user facing interface to
              partitions."
       ::= { ancpAnGroups 6 }

ancpAnNotificationsGroup NOTIFICATION-GROUP
       NOTIFICATIONS {
                       ancpAnSessionDown,
                       ancpAnSessionUp
                     }
       STATUS current
       DESCRIPTION
             "These objects are used to enable or disable the generation
              of notifications by the access node about changes in the
              state of ANCP sessions."
       ::= { ancpAnGroups 7 }

END


8.  Security Considerations

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-write and/or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are the tables and objects and their
   sensitivity/vulnerability:





De Cnodder & Morgenstern  Expires October 30, 2008             [Page 29]


Internet-Draft                  ANCP MIB                      April 2008


   o  ancpAnPartitionsUsed

      This scalar object supports SET operations.  Unauthorized changes
      to this object could result in a wrong interpretation of
      ancpAnSessionConfigPartitionId attribute of all sessions, as if
      all sessions use partition id zero, or to actually disabling the
      use of partitions in the system.

   o  ancpAnSessionConfigTable

      The table consists of the following objects that support SET
      operations:

      *  ancpAnSessionConfigRowStatus
      *  ancpAnSessionConfigGsmpVersion
      *  ancpAnSessionConfigGsmpSubVersion
      *  ancpAnSessionConfigEncapsulationType
      *  ancpAnSessionConfigCapabilities
      *  ancpAnSessionConfigAliveTimer
      *  ancpAnSessionConfigPortReportShaper
      *  ancpAnSessionConfigAggregateReportShaper
      *  ancpAnSessionConfigTransportRetryTimer
      *  ancpAnSessionConfigAncpRetryTimer
      *  ancpAnSessionConfigAnName
      *  ancpAnSessionConfigPartitionId
      *  ancpAnSessionConfigWindowSize
      *  ancpAnSessionConfigRelatedInterface
      *  ancpAnSessionConfigRelatedEntity
      *  ancpAnSessionConfigSvid
      *  ancpAnSessionConfigSPrio
      *  ancpAnSessionConfigCvid
      *  ancpAnSessionConfigCPrio
      *  ancpAnSessionConfigNasIpAddressType
      *  ancpAnSessionConfigNasIpAddress
      *  ancpAnSessionConfigEncapPortNumber
      *  ancpAnSessionConfigNotifyDnEnable
      *  ancpAnSessionConfigNotifyUpEnable

      Unauthorized changes to ancpAnSessionConfigRowStatus could result
      in session being created or brought into service prematurely; or
      could result in session being inadvertently deleted or taken out
      of service.

      Unauthorized changes to ancpAnSessionConfigGsmpVersion or
      ancpAnSessionConfigGsmpSubVersion could have an adverse
      operational effect by limiting the GSMP version to be used in the
      context of this session or enabling a GSMP version number that is
      actually unsupported by the access node.



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 30]


Internet-Draft                  ANCP MIB                      April 2008


      Unauthorized changes to ancpAnSessionConfigEncapsulationType could
      have an adverse operational effect by configuring the session to
      use an undesired or even unsupported protocol.

      Unauthorized changes to ancpAnSessionConfigCapabilities could have
      an adverse operational effect by disabling certain ANCP
      capabilities that the operator assumed that are enabled, or enable
      a capability that the operator would not like to activate.

      Unauthorized changes to ancpAnSessionConfigAliveTimer could have
      an adverse operational effect by increasing the frequency of
      adjacency protocol messages generated by the access node and
      leading to an overload of such messages.  Decreasing the frequency
      of such messages may harm the synchronization between the access
      node and the NAS.

      Unauthorized changes to ancpAnSessionConfigPortReportShaper or
      ancpAnSessionConfigAggregateReportShaper could have an adverse
      operational effect by increasing the frequency of Event Report
      messages generated by the access node and leading to an overload
      of such messages.  Decreasing the frequency of such messages may
      delay the responsiveness of the system to events associated with
      one or more ports.

      Unauthorized changes to ancpAnSessionConfigTransportRetryTimer
      could have an adverse operational effect by increasing the
      frequency of transport connection setup attempts initiated by the
      access node or even unexpectedly enabling the access node to
      initiate the transport connection setup when that supposed to be
      disabled.  Alternatively, when the operator basically planned
      transport connection setup attempts by the access node
      unauthorized changes to the attribute may cause unexpected low
      frequency of such attempts or unexpectedly disable those attempts.

      Unauthorized changes to ancpAnSessionConfigAncpRetryTimer could
      have an adverse operational effect by increasing the frequency of
      ANCP connection setup attempts initiated by the access node or
      even unexpectedly enabling the access node to initiate the ANCP
      connection setup when that supposed to be disabled.
      Alternatively, when the operator basically planned ANCP connection
      setup attempts by the access node unauthorized changes to the
      attribute may cause unexpected low frequency of such attempts or
      unexpectedly disable those attempts.

      Unauthorized changes to ancpAnSessionConfigAnName could confuse
      the NAS, e.g., by detecting the same name from multiple access
      nodes.  This may also override the operator's will to allow/avoid
      the access node to autonomously determine its name.



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 31]


Internet-Draft                  ANCP MIB                      April 2008


      Unauthorized changes to ancpAnSessionConfigPartitionId could mean
      that partitions are used when actually they are not, or vice
      versa.  It could also al least specify a different partition ID
      than the one actually associated with the session.

      Unauthorized changes to ancpAnSessionConfigWindowSize are not
      directly harmful.  However, if the controller adopts the suggested
      wrong window size it may either cause the controller to send too
      many messages in a window or unnecessarily limit itself and that
      could reduce the system performance.

      Unauthorized changes to ancpAnSessionConfigRelatedInterface and/or
      ancpAnSessionConfigRelatedEntity and/or ancpAnSessionConfigSvid
      and/or ancpAnSessionConfigCvid can result in the ANCP packets to
      be sent out on the wrong interface.  This means that the ANCP
      packets to establish a session can be received by someone who is
      not the intended receiver.

      Unauthorized changes to ancpAnSessionConfigSPrio and/or
      ancpAnSessionConfigCPrio may give the ANCP packets a lower or a
      higher priority in the network compared to other packets.
      Lowering the priority might result in a reduced timely behavior of
      the ANCP session, and increasing the priority may result in
      impacting other traffic in the network than ANCP.

      Unauthorized changes to ancpAnSessionConfigNasIpAddressType and/or
      ancpAnSessionConfigNasIpAddress and/or
      ancpAnSessionConfigEncapPortNumber could produce a wrong address
      type (interpretation) and/or IP address for the NAS and/or specify
      a wrong transport protocol port number for the session,
      respectively.

      Unauthorized changes to ancpAnSessionConfigNotifyDnEnable could
      lead (if the change was setting the attribute to 'enable') to
      overload of notification messages at the SNMP manager in case
      multiple sessions leave the 'estab' state simultaneously.  If the
      change was setting the attribute to 'disable' it could lead to
      hiding the actual session state from the SNMP manager.

      Unauthorized changes to ancpAnSessionConfigNotifyUpEnable could
      lead (if the change was setting the attribute to 'enable') to
      overload of notification messages at the SNMP manager in case
      multiple sessions enter the 'estab' state simultaneously.  If the
      change was setting the attribute to 'disable' it could lead to
      hiding the actual session state from the SNMP manager.






De Cnodder & Morgenstern  Expires October 30, 2008             [Page 32]


Internet-Draft                  ANCP MIB                      April 2008


   o  ancpAnInterfaceConfigTable

      The table consists of the following objects that support SET
      operations:

      *  ancpAnInterfaceConfigPartitionId

      Unauthorized changes to ancpAnInterfaceConfigPartitionId could
      result in a wrong association between the interface and a
      partition.  It could result in not being able to manage the
      interface from the correct session and/or to exposing the
      interface to a wrong NAS.


   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  This is the table and these are the objects
   and their sensitivity/vulnerability:

   o  ancpAnCurrentSessionTable

      Access to these objects would allow an intruder to obtain
      information about which vendor's equipment is in use on the
      network.  Further, such information is considered sensitive in
      many environments for competitive reasons.

      *  ancpAnCurrentSessionState
      *  ancpAnCurrentSessionGsmpVersion
      *  ancpAnCurrentSessionGsmpSubVersion
      *  ancpAnCurrentSessionAnName
      *  ancpAnCurrentSessionNasName
      *  ancpAnCurrentSessionAnIpAddressType
      *  ancpAnCurrentSessionAnIpAddress
      *  ancpAnCurrentSessionAnInstance
      *  ancpAnCurrentSessionNasInstance
      *  ancpAnCurrentSessionCapabilities
      *  ancpAnCurrentSessionStartUptime
      *  ancpAnCurrentSessionDiscontinuityTime
      *  ancpAnCurrentSessionStatSentMessages
      *  ancpAnCurrentSessionStatReceivedValidMessages
      *  ancpAnCurrentSessionStatDiscardedMessages

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 33]


Internet-Draft                  ANCP MIB                      April 2008


   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], Section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.


9.  IANA considerations

   IANA is requested to assign an OID xxx under mib-2.


10.  Acknowledgements

   The authors would like to thank Paul Reynders and Bert Wijnen for
   their feedback.


11.  References

11.1.  Normative References

   [ANCPFW]   Ooghe, S., Voigt, N., Platnic, M., Haag, T., and S.
              Wadhwa, "Framework and Requirements for an Access Node
              Control Mechanism in Broadband Multi-Service Networks",
              draft-ietf-ancp-framework-04.txt, work in progress,
              November 2007.

   [ANCPPR]   Wadhwa, S., Moisand, J., Subramanian, S., Haag, T., and N.
              Voigt, "GSMP extensions for layer2 control (L2C) Topology
              Discovery and Line Configuration",
              draft-wadhwa-gsmp-l2control- configuration-02.txt, work in
              progress, November 2007.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Ed., Perkins, D., Ed., and J.



De Cnodder & Morgenstern  Expires October 30, 2008             [Page 34]


Internet-Draft                  ANCP MIB                      April 2008


              Schoenwaelder, Ed., "Structure of Management Information
              Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]  McCloghrie, K., Ed., Perkins, D., Ed., and J.
              Schoenwaelder, Ed., "Textual Conventions for SMIv2",
              STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2863]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group
              MIB", RFC 2863, June 2000.

   [RFC3292]  Doria, A., Hellstrand, F., Sundell, K., and T. Worster,
              "General Switch Management Protocol (GSMP) V3", RFC 3292,
              June 2002.

   [RFC3295]  Sjostrand, H., Buerkle, J., and B. Srinivasan,
              "Definitions of Managed Objects for the General Switch
              Management Protocol (GSMP)", RFC 3295, June 2002.

   [RFC4001]  Daniele, M., Haberman, B., Routhier, S., and J.
              Schoenwaelder, "Textual Conventions for Internet Network
              Addresses", RFC 4001, February 2005.

   [RFC4363]  Levi, D. and D. Harrington, "Definitions of Managed
              Objects for Bridges with Traffic Classes, Multicast
              Filtering, and Virtual LAN Extensions", RFC 4363,
              January 2006.

   [RFC4502]  Waldbusser, S., "Remote Network Monitoring Management
              Information Base Version 2", RFC 4502, May 2006.

11.2.  Informative References

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.












De Cnodder & Morgenstern  Expires October 30, 2008             [Page 35]


Internet-Draft                  ANCP MIB                      April 2008


Authors' Addresses

   Stefaan De Cnodder
   Alcatel-Lucent
   Copernicuslaan 50
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   Email: stefaan.de_cnodder@alcatel- lucent.be


   Moti Morgenstern
   ECI Telecom Ltd.
   30 Hasivim St.
   Petach Tikva  49517
   Israel

   Phone: +972 3 926 6258
   Fax:   +972 3 928 7342
   Email: moti.Morgenstern@ecitele.com






























De Cnodder & Morgenstern  Expires October 30, 2008             [Page 36]


Internet-Draft                  ANCP MIB                      April 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.











De Cnodder & Morgenstern  Expires October 30, 2008             [Page 37]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/