[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09

DetNet                                                     B. Varga, Ed.
Internet-Draft                                                  Ericsson
Intended status: Standards Track                               L. Berger
Expires: November 7, 2020                                       D. Fedyk
                                                 LabN Consulting, L.L.C.
                                                               S. Bryant
                                                  Futurewei Technologies
                                                             J. Korhonen
                                                             May 6, 2020


                    DetNet Data Plane: IP over MPLS
                   draft-ietf-detnet-ip-over-mpls-06

Abstract

   This document specifies the Deterministic Networking data plane when
   operating in an IP over MPLS packet switched network.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 7, 2020.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of



Varga, et al.           Expires November 7, 2020                [Page 1]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   2
     2.1.  Terms Used In This Document . . . . . . . . . . . . . . .   2
     2.2.  Abbreviations . . . . . . . . . . . . . . . . . . . . . .   3
     2.3.  Requirements Language . . . . . . . . . . . . . . . . . .   4
   3.  DetNet IP Data Plane Overview . . . . . . . . . . . . . . . .   4
   4.  IP over DetNet MPLS . . . . . . . . . . . . . . . . . . . . .   5
     4.1.  IP Over DetNet MPLS Data Plane Scenarios  . . . . . . . .   5
     4.2.  DetNet IP over DetNet MPLS Encapsulation  . . . . . . . .   7
   5.  IP over DetNet MPLS Procedures  . . . . . . . . . . . . . . .   8
     5.1.  DetNet IP over DetNet MPLS Flow Identification
           and Aggregation Procedures  . . . . . . . . . . . . . . .   8
     5.2.  DetNet IP over DetNet MPLS Traffic Treatment Procedures .   8
   6.  Management and Control Information Summary  . . . . . . . . .   9
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .   9
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  10
   10. Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  11
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  11
     11.1.  Normative references . . . . . . . . . . . . . . . . . .  11
     11.2.  Informative references . . . . . . . . . . . . . . . . .  12
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  12

1.  Introduction

   Deterministic Networking (DetNet) is a service that can be offered by
   a network to DetNet flows.  DetNet provides these flows extremely low
   packet loss rates and assured maximum end-to-end delivery latency.
   General background and concepts of DetNet can be found in the DetNet
   Architecture [RFC8655].

   This document specifies use of the IP DetNet encapsulation over an
   MPLS network.  It maps the IP data plane encapsulation described in
   [I-D.ietf-detnet-ip] to the DetNet MPLS data plane defined in
   [I-D.ietf-detnet-mpls].

2.  Terminology

2.1.  Terms Used In This Document

   This document uses the terminology and concepts established in the
   DetNet architecture [RFC8655] and




Varga, et al.           Expires November 7, 2020                [Page 2]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   [I-D.ietf-detnet-data-plane-framework], and the reader is assumed to
   be familiar with these documents and their terminology.

2.2.  Abbreviations

   This document uses the abbreviations defined in the DetNet
   architecture [RFC8655] and [I-D.ietf-detnet-data-plane-framework].
   This document uses the following abbreviations:

   CE            Customer Edge equipment.

   d-CW          DetNet Control Word.

   DetNet        Deterministic Networking.

   DF            DetNet Flow.

   DN            DetNet.

   L2            Layer-2.

   L3            Layer-3.

   LSP           Label-switched path.

   MPLS          Multiprotocol Label Switching.

   PE            Provider Edge.

   PEF           Packet Elimination Function.

   PRF           Packet Replication Function.

   PREOF         Packet Replication, Elimination and Ordering Functions.

   POF           Packet Ordering Function.

   PSN           Packet Switched Network.

   PW            Pseudowire.

   S-Label       DetNet "service" label.

   T-PE          Terminating Provider Edge.

   TE            Traffic Engineering.





Varga, et al.           Expires November 7, 2020                [Page 3]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   TSN           Time-Sensitive Networking, TSN is a Task Group of the
                 IEEE 802.1 Working Group.

2.3.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  DetNet IP Data Plane Overview

   Figure 1 illustrates an IP DetNet, with an MPLS based DetNet network
   as a sub-network between the relay nodes.  It shows a more complex
   DetNet enabled IP network where an IP flow is mapped to one or more
   PWs and MPLS (TE) LSPs.  The end systems still originate IP
   encapsulated traffic that are identified as DetNet flows.  The relay
   nodes follow procedures defined in Section 4 to map each DetNet flow
   to MPLS LSPs.  While not shown, relay nodes can provide service sub-
   layer functions such as PREOF using DetNet over MPLS, and this is
   indicated by the solid line for the MPLS facing portion of the
   Service component.  Note that the Transit node is MPLS (TE) LSP aware
   and performs switching based on MPLS labels, and need not have any
   specific knowledge of the DetNet service or the corresponding DetNet
   flow identification.  See Section 4 for details on the mapping of IP
   flows to MPLS, and [I-D.ietf-detnet-mpls] for general support of
   DetNet services using MPLS.























Varga, et al.           Expires November 7, 2020                [Page 4]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


    DetNet IP       Relay         Transit         Relay      DetNet IP
    End System      Node           Node           Node       End System

   +----------+                                             +----------+
   |   Appl.  |<------------- End to End Service ---------->|  Appl.   |
   +----------+   .....-----+                 +-----.....   +----------+
   | Service  |<--: Service |--DetNet flow ---| Service :-->| Service  |
   |          |   :         |<-DN MPLS flow ->|         :   |          |
   +----------+   +---------+  +----------+   +---------+   +----------+
   |Forwarding|   |Fwd| |Fwd|  |Forwarding|   |Fwd| |Fwd|   |Forwarding|
   +-------.--+   +-.-+ +-.-+  +----.---.-+   +-.-+ +-.-+   +---.------+
           :  Link  :    /  ,-----.  \   : Link :    /  ,-----.  \
           +........+    +-[  Sub  ]-+   +......+    +-[  Sub  ]-+
                           [Network]                   [Network]
                            `-----'                     `-----'

                        |<---- DetNet MPLS ---->|
            |<--------------------- DetNet IP ------------------>|

        Figure 1: Architecture: DetNet IP Over DetNet MPLS Network

4.  IP over DetNet MPLS

   This section defines how IP encapsulated flows are carried over a
   DetNet MPLS data plane as defined in [I-D.ietf-detnet-mpls].  Since
   both Non-DetNet and DetNet IP packet are identical on the wire, this
   section is applicable to any node that supports IP over DetNet MPLS,
   and this section refers to both cases as DetNet IP over DetNet MPLS.

4.1.  IP Over DetNet MPLS Data Plane Scenarios

   An example use of DetNet IP over DetNet MPLS is presented here.

   Figure 1 illustrated DetNet enabled End Systems (hosts), connected to
   DetNet (DN) enabled IP networks, operating over a DetNet aware MPLS
   network.  Using this figure we can have a case where the Relay nodes
   act as T-PEs and sit at the boundary of the MPLS domain since the
   non-MPLS domain is DetNet aware.  This case is very similar to the
   DetNet MPLS Network figure 2 in [I-D.ietf-detnet-mpls].  However in
   [I-D.ietf-detnet-mpls] figure 2 the T-PEs are located at the end
   system and MPLS spans the whole DetNet service.  The primary
   difference in this document is that the Relay nodes are at the edges
   of the MPLS domain and therefore function as T-PEs, and that MPLS
   service sub-layer functions are not provided over the DetNet IP
   network.  The transit node functions show above are identical to
   those described in [I-D.ietf-detnet-mpls].





Varga, et al.           Expires November 7, 2020                [Page 5]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   Figure 2 illustrates how relay nodes can provide service protection
   over an MPLS domain.  In this case, CE1 and CE2 are IP DetNet end
   systems which are interconnected via a MPLS domain such as described
   in [I-D.ietf-detnet-mpls].  Note that R1 and R3 sit at the edges of
   an MPLS domain and therefore are similar to T-PEs, while R2 sits in
   the middle of the domain and is therefore similar to an S-PE.

         DetNet                                         DetNet
   IP    Service         Transit          Transit       Service  IP
   DetNet               |<-Tnl->|        |<-Tnl->|               DetNet
   End     |            V   1   V        V   2   V            |  End
   System  |   +--------+       +--------+       +--------+   |  System
   +---+   |   |   R1   |=======|   R2   |=======|   R3   |   |   +---+
   |   |-------|._X_....|..DF1..|.__ ___.|..DF3..|...._X_.|-------|   |
   |CE1|   |   |    \   |       |   X    |       |   /    |   |   |CE2|
   |   |   |   |     \_.|..DF2..|._/ \__.|..DF4..|._/     |   |   |   |
   +---+       |        |=======|        |=======|        |       +---+
       ^       +--------+       +--------+       +--------+       ^
       |        Relay Node       Relay Node       Relay Node      |
       |          (T-PE)           (S-PE)          (T-PE)         |
       |                                                          |
       |<-DN IP-> <-------- DetNet MPLS ---------------> <-DN IP->|
       |                                                          |
       |<-------------- End to End DetNet Service --------------->|

      -------------------------- Data Flow ------------------------->

       X   = Service protection (PRF, PREOF, PEF/POF)
       DFx = DetNet member flow x over a TE LSP

    Figure 2: Service Protection Over DetNet MPLS Network for DetNet IP

   Figure 1 illustrates DetNet enabled End Systems, connected to DetNet
   (DN) enabled MPLS network.  A similar situation occurs when end
   systems are are not DetNet aware.  In this case, edge nodes sit at
   the boundary of the MPLS domain since it is also a DetNet domain
   boundary.  The edge nodes provide DetNet service proxies for the end
   applications by initiating and terminating DetNet service for the
   application's IP flows.  While the node types differ, there is
   essentially no difference in data plane processing between relay and
   edges.  There are likely to be differences in controller plane
   operation, particularly when distributed control plane protocols are
   used.

   It is still possible to provided DetNet service protection for non-
   DetNet aware end systems.  This case is basically the same as
   Figure 2, with the exception that CE1 and CE2 are non-DetNet aware
   end systems and R1 and R3 become edge nodes.



Varga, et al.           Expires November 7, 2020                [Page 6]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


4.2.  DetNet IP over DetNet MPLS Encapsulation

   The basic encapsulation approach is to treat a DetNet IP flow as an
   app-flow from the DetNet MPLS perspective.  The corresponding example
   DetNet Sub-Network format is shown in Figure 3.


                /->     +------+  +------+  +------+            ^ ^
                |       |  X   |  |  X   |  |  X   |<- App-Flow : :
                |       +------+  +------+  +------+            : :
     App-Flow <-+       |NProto|  |NProto|  |NProto|            : :(1)
      for MPLS  |       +------+  +------+  +------+            : :
                |       |  IP  |  |  IP  |  |  IP  |            : v
                \-> +---+======+--+======+--+======+-----+      :
     DetNet-MPLS        | d-CW |  | d-CW |  | d-CW |            :
                        +------+  +------+  +------+            :(2)
                        |Labels|  |Labels|  |Labels|            v
                    +---+======+--+======+--+======+-----+
     Link/Sub-Network   |  L2  |  | TSN  |  | UDP  |
                        +------+  +------+  +------+
                                            |  IP  |
                                            +------+
                                            |  L2  |
                                            +------+
         (1) DetNet IP Flow (or simply IP flow)
         (2) DetNet MPLS Flow


         Figure 3: Example DetNet IP over MPLS Sub-Network Formats

   In Figure 3 "App-Flow" indicates the payload carried by the DetNet IP
   data plane.  "IP" and "NProto" indicate the fields described in
   Section 5.1.1.  (IP Header Information) and Section 5.1.2.  (Other
   Protocol Header Information) of [I-D.ietf-detnet-ip], respectively.
   "App-Flow for MPLS" indicates that an individual DetNet IP flow is
   the payload from the perspective of the DetNet MPLS data plane
   defined in [I-D.ietf-detnet-mpls].

   Per Section 5.1 of [I-D.ietf-detnet-mpls], the DetNet MPLS data plane
   uses a single S-Label to support a single app flow.  DetNet IP Flow
   Identification Procedures in Section 4.4 of [I-D.ietf-detnet-ip]
   states that a single DetNet flow is identified based on IP, and next
   level protocol, header information.  Section 4.4.  (Aggregation
   Considerations) of [I-D.ietf-detnet-ip] defines the ways in which
   aggregation is supported through the use of prefixes, wildcards,
   lists, and port ranges.  Collectively, this results in the fairly
   straightforward procedures defined in this section.




Varga, et al.           Expires November 7, 2020                [Page 7]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   As shown in Figure 2, DetNet relay nodes are responsible for the
   mapping of a DetNet flow, at the service sub-layer, from the IP to
   MPLS DetNet data planes and back again.  Their related DetNet IP over
   DetNet MPLS data plane operation is comprised of two sets of
   procedures: the mapping of flow identifiers, and ensuring proper
   traffic treatment.

   Mapping of IP to DetNet MPLS is similar for DetNet IP flows and IP
   flows.  The six-tuple of IP is mapped to the S-Label in both cases.
   The various fields may be mapped or ignored when going from IP to
   MPLS.

5.  IP over DetNet MPLS Procedures

5.1.  DetNet IP over DetNet MPLS Flow Identification and Aggregation
      Procedures

   A DetNet relay node (ingress T-PE) that sends a DetNet IP flow over a
   DetNet MPLS network MUST map a DetNet IP flow, as identified in
   [I-D.ietf-detnet-ip] into a single MPLS DetNet flow and MUST process
   it in accordance to the procedures defined in [I-D.ietf-detnet-mpls].
   PRF MAY be supported at the MPLS level for DetNet IP flows sent over
   an DetNet MPLS network.  Aggregation MAY be supported as defined in
   [I-D.ietf-detnet-mpls] Section 4.4.  Aggregation considerations in
   [I-D.ietf-detnet-ip] MAY be used to identify an individual DetNet IP
   flow.  The provisioning of the mapping of DetNet IP flows to DetNet
   MPLS flows MUST be supported via configuration, e.g., via the
   controller plane.

   A DetNet relay node (egress T-PE) MAY be provisioned to handle
   packets received via the DetNet MPLS data plane as DetNet IP flows.
   A single incoming DetNet MPLS flow MAY be treated as a single DetNet
   IP flow, without examination of IP headers.  Alternatively, packets
   received via the DetNet MPLS data plane MAY follow the normal DetNet
   IP flow identification procedures defined in [I-D.ietf-detnet-ip]
   Section 5.1.

   An implementation MUST support the provisioning for handling any
   received DetNet MPLS data plane as DetNet IP flows via configuration.
   Note that such configuration MAY include support from PREOF on the
   incoming DetNet MPLS flow.

5.2.  DetNet IP over DetNet MPLS Traffic Treatment Procedures

   The traffic treatment required for a particular DetNet IP flow is
   provisioned via configuration or the controller plane.  When a DetNet
   IP flow is sent over DetNet MPLS, a DetNet relay node MUST ensure
   that the provisioned DetNet IP traffic treatment is provided at the



Varga, et al.           Expires November 7, 2020                [Page 8]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   forwarding sub-layer as described in [I-D.ietf-detnet-mpls]
   Section 5.2.  Note that the PRF function MAY be utilized when sending
   IP over MPLS.

   Traffic treatment for DetNet IP flows received over the DetNet MPLS
   data plane MUST follow Section 5.3 DetNet IP Traffic Treatment
   Procedures in [I-D.ietf-detnet-ip].

6.  Management and Control Information Summary

   The following summarizes the set of information that is needed to
   support DetNet IP over DetNet MPLS at the MPLS ingress node:

   o  Each MPLS App-Flow is identified using the IP flow identification
      information as defined in [I-D.ietf-detnet-ip].  The information
      is summarized in Section 5.1 of that document, and includes all
      wildcards, port ranges and the ability to ignore specific IP
      fields.

   o  The DetNet MPLS service that is to be used to send the matching IP
      traffic.  This matching information is provided in
      [I-D.ietf-detnet-mpls] Section 5.1, and includes both service and
      traffic delivery information.

   The following summarizes the set of information that is needed to
   support DetNet IP over DetNet MPLS at the MPLS egress node:

   o  S-Label values that are carrying MPLS over IP encapsulated
      traffic.

   o  For each S-Label, how the received traffic is to be handled.  The
      traffic may be processed according as any other DetNet IP traffic
      as defined in this document or in [I-D.ietf-detnet-ip], or the
      traffic may be directly treated as an MPLS App-flow for additional
      processing according to [I-D.ietf-detnet-mpls].

   It is the responsibility of the DetNet controller plane to properly
   provision both flow identification information and the flow specific
   resources needed to provided the traffic treatment needed to meet
   each flow's service requirements.  This applies for aggregated and
   individual flows.

7.  Security Considerations

   Generals security considerations for DetNet are described in detail
   in [I-D.ietf-detnet-security].  DetNet MPLS and DetNet IP security
   considerations equally apply to this document and are described in
   [I-D.ietf-detnet-mpls] and [I-D.ietf-detnet-ip].



Varga, et al.           Expires November 7, 2020                [Page 9]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   Security aspects which are unique to DetNet are those whose aim is to
   provide the specific quality of service aspects of DetNet, which are
   primarily to deliver data flows with extremely low packet loss rates
   and bounded end-to-end delivery latency.

   The primary considerations for the data plane is to maintain
   integrity of data and delivery of the associated DetNet service
   traversing the DetNet network.  Application flows can be protected
   through whatever means is provided by the underlying technology.  For
   example, encryption may be used, such as that provided by IPSec
   [RFC4301] for IP flows and/or by an underlying sub-net using MACSec
   [IEEE802.1AE-2018] for IP over Ethernet (Layer-2) flows.

   From a data plane perspective this document does not add or modify
   any header information.

   At the management and control level DetNet flows are identified on a
   per-flow basis, which may provide controller plane attackers with
   additional information about the data flows (when compared to
   controller planes that do not include per-flow identification).  This
   is an inherent property of DetNet which has security implications
   that should be considered when determining if DetNet is a suitable
   technology for any given use case.

   To provide uninterrupted availability of the DetNet service,
   provisions can be made against DOS attacks and delay attacks.  To
   protect against DOS attacks, excess traffic due to malicious or
   malfunctioning devices can be prevented or mitigated, for example
   through the use of existing mechanism such as policing and shaping
   applied at the input of a DetNet domain.  To prevent DetNet packets
   from being delayed by an entity external to a DetNet domain, DetNet
   technology definition can allow for the mitigation of Man-In-The-
   Middle attacks, for example through use of authentication and
   authorization of devices within the DetNet domain.

8.  IANA Considerations

   This document makes no IANA requests.

9.  Acknowledgements

   The authors wish to thank Pat Thaler, Norman Finn, Loa Anderson,
   David Black, Rodney Cummings, Ethan Grossman, Tal Mizrahi, David
   Mozes, Craig Gunther, George Swallow, Yuanlong Jiang and Carlos J.
   Bernardos for their various contributions to this work.






Varga, et al.           Expires November 7, 2020               [Page 10]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


10.  Contributors

   RFC7322 limits the number of authors listed on the front page of a
   draft to a maximum of 5.  The editor wishes to thank and acknowledge
   the follow authors for contributing text to this draft.

      Janos Farkas
      Ericsson
      Email: janos.farkas@ericsson.com

      Andrew G. Malis
      Malis Consulting
      Email: agmalis@gmail.com

   Janos Farkas contributed substantially to the content of this
   document.

11.  References

11.1.  Normative references

   [I-D.ietf-detnet-ip]
              Varga, B., Farkas, J., Berger, L., Fedyk, D., Malis, A.,
              and S. Bryant, "DetNet Data Plane: IP", draft-ietf-detnet-
              ip-05 (work in progress), February 2020.

   [I-D.ietf-detnet-mpls]
              Varga, B., Farkas, J., Berger, L., Fedyk, D., Malis, A.,
              Bryant, S., and J. Korhonen, "DetNet Data Plane: MPLS",
              draft-ietf-detnet-mpls-05 (work in progress), February
              2020.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8655]  Finn, N., Thubert, P., Varga, B., and J. Farkas,
              "Deterministic Networking Architecture", RFC 8655,
              DOI 10.17487/RFC8655, October 2019,
              <https://www.rfc-editor.org/info/rfc8655>.






Varga, et al.           Expires November 7, 2020               [Page 11]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


11.2.  Informative references

   [I-D.ietf-detnet-data-plane-framework]
              Varga, B., Farkas, J., Berger, L., Malis, A., and S.
              Bryant, "DetNet Data Plane Framework", draft-ietf-detnet-
              data-plane-framework-04 (work in progress), February 2020.

   [I-D.ietf-detnet-security]
              Mizrahi, T. and E. Grossman, "Deterministic Networking
              (DetNet) Security Considerations", draft-ietf-detnet-
              security-09 (work in progress), March 2020.

   [IEEE802.1AE-2018]
              IEEE Standards Association, "IEEE Std 802.1AE-2018 MAC
              Security (MACsec)", 2018,
              <https://ieeexplore.ieee.org/document/8585421>.

   [RFC4301]  Kent, S. and K. Seo, "Security Architecture for the
              Internet Protocol", RFC 4301, DOI 10.17487/RFC4301,
              December 2005, <https://www.rfc-editor.org/info/rfc4301>.

Authors' Addresses

   Balazs Varga (editor)
   Ericsson
   Magyar Tudosok krt. 11.
   Budapest  1117
   Hungary

   Email: balazs.a.varga@ericsson.com


   Lou Berger
   LabN Consulting, L.L.C.

   Email: lberger@labn.net


   Don Fedyk
   LabN Consulting, L.L.C.

   Email: dfedyk@labn.net


   Stewart Bryant
   Futurewei Technologies

   Email: stewart.bryant@gmail.com



Varga, et al.           Expires November 7, 2020               [Page 12]


Internet-Draft    DetNet IP over DetNet MPLS Data Plane         May 2020


   Jouni Korhonen

   Email: jouni.nospam@gmail.com
















































Varga, et al.           Expires November 7, 2020               [Page 13]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/