[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 RFC 6925

DHC                                                             B. Joshi
Internet-Draft                                        D. Ramakrishna Rao
Intended status: Standards Track                            Infosys Ltd.
Expires: January 10, 2013                                       M. Stapp
                                                     Cisco Systems, Inc.
                                                            July 9, 2012


              The DHCPv4 Relay Agent Identifier Suboption
                draft-ietf-dhc-relay-id-suboption-11.txt

Abstract

   This draft defines a new Relay Agent Identifier suboption for the
   Dynamic Host Configuration Protocol's (DHCP) Relay Agent Information
   option.  The suboption carries a value that uniquely identifies the
   relay agent device within the administrative domain.  The value is
   normally administratively-configured in the relay agent.  The
   suboption allows a DHCP relay agent to include the identifier in the
   DHCP messages it sends.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 10, 2013.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect



Joshi, et al.           Expires January 10, 2013                [Page 1]


Internet-Draft        The Relay Agent Id Suboption             July 2012


   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   3.  Example Use-Cases . . . . . . . . . . . . . . . . . . . . . . . 3
     3.1.  Bulk Leasequery . . . . . . . . . . . . . . . . . . . . . . 3
     3.2.  Industrial Ethernet . . . . . . . . . . . . . . . . . . . . 3
   4.  Suboption Format  . . . . . . . . . . . . . . . . . . . . . . . 4
   5.  Identifier Stability  . . . . . . . . . . . . . . . . . . . . . 4
   6.  Security Considerations . . . . . . . . . . . . . . . . . . . . 5
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5
   8.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . 6
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 6
     9.1.  Normative References  . . . . . . . . . . . . . . . . . . . 6
     9.2.  Informative References  . . . . . . . . . . . . . . . . . . 6
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 6





























Joshi, et al.           Expires January 10, 2013                [Page 2]


Internet-Draft        The Relay Agent Id Suboption             July 2012


1.  Introduction

   The Dynamic Host Configuration Protocol for IPv4 (DHCPv4) [RFC2131]
   provides IP addresses and configuration information for IPv4 clients.
   It includes a relay agent capability, in which network elements
   receive broadcast messages from clients and forward them to DHCP
   servers as unicast messages.  In many network environments, relay
   agents add information to the DHCP messages before forwarding them,
   using the Relay Agent Information option [RFC3046].  Servers that
   recognize the relay agent information option echo it back in their
   replies.

   This specification introduces a Relay Agent Identifier suboption for
   the Relay Agent Information option.  The Relay-Id suboption carries a
   sequence of octets that is intended to uniquely identify the relay
   agent within the administrative domain.


2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   DHCPv4 terminology is defined in [RFC2131], and the DHCPv4 Relay
   Agent Information Option in [RFC3046].


3.  Example Use-Cases

3.1.  Bulk Leasequery

   There has been quite a bit of recent interest in extending the DHCP
   Leasequery protocol [RFC4388] to accommodate some additional
   situations.  There is a recent draft
   ([I-D.ietf-dhc-dhcpv4-bulk-leasequery] proposing a variety of
   enhancements to the existing Leasequery protocol.  The draft
   describes a use-case where a relay agent queries DHCP servers using
   the Relay Identifier to retrieve all the leases allocated through the
   relay agent.

3.2.  Industrial Ethernet

   DHCP typically identifies clients based on information in their DHCP
   messages - such as the Client-Identifier option, or the value of the
   chaddr field.  In some networks, however, the location of a client -
   its point of attachment to the network - is a more useful identifier.
   In factory-floor networks (commonly called 'Industrial' networks),



Joshi, et al.           Expires January 10, 2013                [Page 3]


Internet-Draft        The Relay Agent Id Suboption             July 2012


   for example, the role a device plays is often fixed and based on its
   location.  Using manual address configuration is possible (and is
   common) but it would be beneficial if DHCP configuration could be
   applied to these networks.

   One way to provide connection-based identifiers for industrial
   networks is to have the network elements acting as DHCP relay agents
   supply information that a DHCP server could use as a client
   identifier.  A straightforward way to form identifier information is
   to combine something that is unique within the scope of the network
   element, such as a port/slot value, with something that uniquely
   identifies that network element, such as a Relay Agent Identifier.


4.  Suboption Format

   Format of the Relay Agent Identifier suboption:



       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |SUBOPT_RELAY_ID|    length     |                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               |
      .                                                               .
      .                   identifier (variable)                       .
      .                                                               .
      +---------------------------------------------------------------+

      Where:

      SUBOPT_RELAY_ID   [TBA]

      length            the number of octets in the suboption
                        (excluding the suboption ID and length fields);
                        the minimum length is one.

      identifier        the identifying data.



5.  Identifier Stability

   If the relay identifier is to be meaningful it has to be stable.  A
   relay agent SHOULD use a single identifier value consistently.  The
   identifier used by a relay device SHOULD be committed to stable
   storage, unless the relay device can regenerate the value upon



Joshi, et al.           Expires January 10, 2013                [Page 4]


Internet-Draft        The Relay Agent Id Suboption             July 2012


   reboot.

   Administrators MUST make sure that the relay-id configured in a relay
   agent is unique within their administrative domain.  To aid this,
   relay agents SHOULD make their relay identifiers visible to their
   administrators via their user interface, through a log entry, or
   through some other mechanism.

   Implementors should note that the identifier needs to be present in
   all DHCP message types where its value is being used by the DHCP
   server.  The relay agent may not be able to add the Relay Agent
   Information option to all messages - such as RENEW messages sent as
   IP unicasts.  In some deployments that might mean that the server has
   to be willing to continue to associate the relay identifier it has
   last seen with a lease that is being RENEWed.  Other deployments may
   prefer to use the Server Identifier Override suboption [RFC5107] to
   permit the relay device to insert the Relay Agent Information option
   into all relayed messages.

   Handling situations where a relay agent device is replaced is another
   aspect of "stability".  One of the use-cases for the relay identifier
   is to permit a server to associate clients' lease bindings with the
   relay device connected to the clients.  If the relay device is
   replaced, because it has failed or been upgraded, it may be desirable
   for the new device to continue to provide the same relay identifier
   as the old device.  Implementors should be aware of this possibility,
   and consider making it possible for administrators to configure the
   identifier.


6.  Security Considerations

   Security issues with the Relay Agent Information option and its use
   by servers in address assignment are discussed in [RFC3046] and
   [RFC4030].  Relay agents who send the Relay Agent Identifier
   suboption SHOULD use the Relay Agent Authentication suboption
   [RFC4030] to provide integrity protection and to avoid duplication of
   relay identifiers by malicious entities.


7.  IANA Considerations

   We request that IANA assign a new suboption code from the registry of
   DHCP Agent Sub-Option Codes maintained in
   http://www.iana.org/assignments/bootp-dhcp-parameters.






Joshi, et al.           Expires January 10, 2013                [Page 5]


Internet-Draft        The Relay Agent Id Suboption             July 2012



      Relay Agent Identifier Suboption [TBA]


8.  Acknowledgments

   Thanks to Bernie Volz, David W. Hankins, Pavan Kurapati and Ted Lemon
   for providing valuable suggestions.


9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2131]  Droms, R., "Dynamic Host Configuration Protocol",
              RFC 2131, March 1997.

   [RFC3046]  Patrick, M., "DHCP Relay Agent Information Option",
              RFC 3046, January 2001.

   [RFC4030]  Stapp, M. and T. Lemon, "The Authentication Suboption for
              the Dynamic Host Configuration Protocol (DHCP) Relay Agent
              Option", RFC 4030, March 2005.

9.2.  Informative References

   [RFC4388]  Woundy, R. and K. Kinnear, "Dynamic Host Configuration
              Protocol (DHCP) Leasequery", RFC 4388, February 2006.

   [RFC5107]  Johnson, R., Kumarasamy, J., Kinnear, K., and M. Stapp,
              "DHCP Server Identifier Override Suboption", RFC 5107,
              February 2008.

   [I-D.ietf-dhc-dhcpv4-bulk-leasequery]
              Kinnear, K., Stapp, M., Joshi, B., and N. Russell, "Bulk
              DHCPv4 Lease Query",
              draft-ietf-dhc-dhcpv4-bulk-leasequery-06 (work in
              progress), March 2012.










Joshi, et al.           Expires January 10, 2013                [Page 6]


Internet-Draft        The Relay Agent Id Suboption             July 2012


Authors' Addresses

   Bharat Joshi
   Infosys Ltd.
   44 Electronics City, Hosur Road
   Bangalore  560 100
   India

   Email: bharat_joshi@infosys.com
   URI:   http://www.infosys.com/


   D.T.V Ramakrishna Rao
   Infosys Ltd.
   44 Electronics City, Hosur Road
   Bangalore  560 100
   India

   Email: ramakrishnadtv@infosys.com
   URI:   http://www.infosys.com/


   Mark Stapp
   Cisco Systems, Inc.
   1414 Massachusetts Ave.
   Boxborough, MA  01719
   USA

   Phone: +1 978 936 0000
   Email: mjs@cisco.com





















Joshi, et al.           Expires January 10, 2013                [Page 7]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/