[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-andersen-arc) 00 01 02 03 04 05 06 07 08 09

DMARC Working Group                                          K. Andersen
Internet-Draft                                                  LinkedIn
Intended status: Standards Track                            B. Long, Ed.
Expires: March 10, 2018                                           Google
                                                           S. Jones, Ed.
                                                       M. Kucherawy, Ed.
                                                                     TDP
                                                      September 06, 2017


              Authenticated Received Chain (ARC) Protocol
                    draft-ietf-dmarc-arc-protocol-09

Abstract

   The Authenticated Received Chain (ARC) protocol creates a mechanism
   whereby a series of handlers of an email message can conduct
   authentication of the email message as it passes among them on the
   way to its destination, and record the status of that authentication
   at each step along the handling path, for use by the final recipient
   in making choices about the disposition of the message.  Changes in
   the message that might break DKIM or DMARC can be identified through
   the ARC set of header fields.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 10, 2018.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents



Andersen, et al.         Expires March 10, 2018                 [Page 1]


Internet-Draft                ARC-Protocol                September 2017


   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Overview  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  Definitions and Terminology . . . . . . . . . . . . . . . . .   5
     3.1.  Referenced Definitions  . . . . . . . . . . . . . . . . .   6
   4.  Instance ('i=') Tag . . . . . . . . . . . . . . . . . . . . .   6
     4.1.  Valid Range for Instance Tags . . . . . . . . . . . . . .   7
   5.  The ARC Header Fields . . . . . . . . . . . . . . . . . . . .   7
     5.1.  ARC-Authentication-Results (AAR)  . . . . . . . . . . . .   7
       5.1.1.  Additional Information for the AAR Header . . . . . .   7
     5.2.  ARC-Message-Signature (AMS) . . . . . . . . . . . . . . .   8
     5.3.  ARC-Seal (AS) . . . . . . . . . . . . . . . . . . . . . .   8
       5.3.1.  The 'cv' Tag  . . . . . . . . . . . . . . . . . . . .   9
       5.3.2.  Selected Header Fields  . . . . . . . . . . . . . . .   9
   6.  Verifier Actions  . . . . . . . . . . . . . . . . . . . . . .  10
   7.  Signer Actions  . . . . . . . . . . . . . . . . . . . . . . .  11
   8.  Key Management  . . . . . . . . . . . . . . . . . . . . . . .  12
   9.  Usage of ARC and Chain Validity . . . . . . . . . . . . . . .  12
     9.1.  Relationship between DKIM-Signature and AMS signing
           scopes  . . . . . . . . . . . . . . . . . . . . . . . . .  12
     9.2.  Assessing Chain Validity Violations . . . . . . . . . . .  12
     9.3.  Marking and Sealing "cv=fail" (Invalid) Chains  . . . . .  13
     9.4.  Handling DNS Problems While Validating ARC  . . . . . . .  13
     9.5.  Responding to ARC Validity Violations . . . . . . . . . .  13
   10. Recording and Reporting the Results of ARC Evaluation . . . .  13
     10.1.  Information from an ARC Evaluation . . . . . . . . . . .  13
     10.2.  Recording (local) ARC Evaluation Results . . . . . . . .  14
     10.3.  DMARC Reporting of ARC Findings - Interim  . . . . . . .  14
   11. Supporting Alternate Signing Algorithms . . . . . . . . . . .  15
     11.1.  Introductory Period  . . . . . . . . . . . . . . . . . .  15
     11.2.  Co-Existence Period  . . . . . . . . . . . . . . . . . .  15
     11.3.  Deprecation Period . . . . . . . . . . . . . . . . . . .  15
     11.4.  Obsolescence Period  . . . . . . . . . . . . . . . . . .  15
   12. Privacy Considerations  . . . . . . . . . . . . . . . . . . .  15
   13. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  16
     13.1.  Authentication-Results Method Registry Update  . . . . .  16
     13.2.  Definitions of the ARC header fields . . . . . . . . . .  16
   14. Security Considerations . . . . . . . . . . . . . . . . . . .  17
     14.1.  Message Content Suspicion  . . . . . . . . . . . . . . .  17



Andersen, et al.         Expires March 10, 2018                 [Page 2]


Internet-Draft                ARC-Protocol                September 2017


   15. Implementation Status . . . . . . . . . . . . . . . . . . . .  18
     15.1.  GMail test reflector and incoming validation . . . . . .  18
     15.2.  AOL test reflector and internal tagging  . . . . . . . .  19
     15.3.  dkimpy . . . . . . . . . . . . . . . . . . . . . . . . .  19
     15.4.  OpenARC  . . . . . . . . . . . . . . . . . . . . . . . .  20
     15.5.  Mailman 3.1+ patch . . . . . . . . . . . . . . . . . . .  20
     15.6.  Copernica/MailerQ web-based validation . . . . . . . . .  21
     15.7.  Rspamd . . . . . . . . . . . . . . . . . . . . . . . . .  21
     15.8.  PERL Mail::Milter::Authentication module . . . . . . . .  22
   16. References  . . . . . . . . . . . . . . . . . . . . . . . . .  22
     16.1.  Normative References . . . . . . . . . . . . . . . . . .  22
     16.2.  Informative References . . . . . . . . . . . . . . . . .  24
     16.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .  25
   Appendix A.  Appendix A - Design Requirements . . . . . . . . . .  25
     A.1.  Primary Design Criteria . . . . . . . . . . . . . . . . .  25
     A.2.  Out of Scope  . . . . . . . . . . . . . . . . . . . . . .  26
   Appendix B.  Appendix B - Example Usage . . . . . . . . . . . . .  26
     B.1.  Example 1: Simple mailing list  . . . . . . . . . . . . .  26
       B.1.1.  Here's the message as it exits the Origin:  . . . . .  26
       B.1.2.  Message is then received at example.org . . . . . . .  27
       B.1.3.  Example 1: Message received by Recipient  . . . . . .  29
     B.2.  Example 2: Mailing list to forwarded mailbox  . . . . . .  30
       B.2.1.  Here's the message as it exits the Origin:  . . . . .  30
       B.2.2.  Message is then received at example.org . . . . . . .  31
       B.2.3.  Example 2: Message received by Recipient  . . . . . .  35
     B.3.  Example 3: Mailing list to forwarded mailbox with source   37
       B.3.1.  Here's the message as it exits the Origin:  . . . . .  37
       B.3.2.  Message is then received at example.org . . . . . . .  38
       B.3.3.  Example 3: Message received by Recipient  . . . . . .  43
   Appendix C.  Acknowledgements . . . . . . . . . . . . . . . . . .  45
   Appendix D.  Comments and Feedback  . . . . . . . . . . . . . . .  46
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  46

1.  Introduction

   Modern email authentication techniques such as the Sender Policy
   Framework (SPF) [RFC7208] and DomainKeys Identified Mail (DKIM)
   [RFC6376] have become common.
   However, their end-to-end utility is limited by the effects of
   intermediaries along the transmission path, which either are not
   listed (for SPF) or which break digital signatures (for DKIM).  These
   issues are described in substantial detail in those protocols'
   defining documents as well as in [RFC6377] and [RFC7960].

   Technologies that build upon the use of SPF and DKIM can reduce the
   success of fraudulent email campaigns.  To this end, Domain-based
   Mail Authentication, Reporting and Compliance (DMARC) [RFC7489],
   validates the domain of the RFC5322.From author header field.



Andersen, et al.         Expires March 10, 2018                 [Page 3]


Internet-Draft                ARC-Protocol                September 2017


   However its use along email transmission paths that have independent
   intermediaries, such as some forwarders and essentially all mailing
   list services, produces false positive rejections that are
   problematic, both for the message authors, the intermediary
   service(s), and for those they are interacting with.

   What is needed is a mechanism by which legitimate alteration of a
   message, which invalidates associated SPF and DKIM information, does
   not ultimately result in a rejection of an email message on delivery.
   Authenticated Receive Chain (ARC) builds upon DKIM mechanisms to
   provide a sequence of signatures that are more survivable than DKIM's
   and that provide a view of the handling sequence for a message,
   especially the points where alterations of the content might have
   occurred.  Equipped with this more complete information, the
   recipient system(s) can make a more informed handling choice,
   reducing or eliminating the false negatives inherent in use of DKIM
   and/or SPF themselves.

2.  Overview

   In DKIM, every participating signing agent attaches a signature that
   is based on the some of the content of the message, local policy, and
   the domain name of the participating Administrative Management Domain
   (ADMD).  Any verifier can process such a signature; a verified
   signature means that the domain referenced in the DKIM-Signture's
   "d=" parameter has some responsibility for handling the message.  An
   artifact of using digital signature technology for this means that
   verification also ensures that the message content that was "covered"
   by the signature has not been altered since the signature was
   applied.  The signatures themselves are generally independent of one
   another.

   By contrast, an ARC signature conveys the following pieces of
   information:

   1.  An assertion that, at the time that the intermediary ADMD
       processed the message, the various assertions (DKIM-Signature(s)
       and/or ARC sets) already attached to the message by other ADMDs
       were or were not valid;

   2.  As with DKIM, an assertion that, for a validated signature, the
       domain name in the signature takes some responsibility for
       handling of the message and that the message is unchanged since
       that signature was applied;

   3.  A further assertion that binds the ARC evaluation results into
       the ARC chain sequence.




Andersen, et al.         Expires March 10, 2018                 [Page 4]


Internet-Draft                ARC-Protocol                September 2017


   This protocol accomplishes each of these by adding a new header field
   to the message for each of these pieces of information, as follows:

   o  ARC-Authentication-Results (referred to below as "AAR"): virtually
      identical in syntax to an Authentication-Results field [RFC7601],
      this field records the results of all message authentication
      checks done by the recording ADMD at the time the message arrived.
      Additional information is placed in this field compared to a
      standard Authentication-Results field in order to support a more
      complete DMARC report (see Section 5.1);

   o  ARC-Message-Signature (referred to below as "AMS"): virtually
      identical in syntax to DKIM-Signature, this field contains the
      signature about the message header and body as they existed at the
      time of handling by the ADMD adding it; and

   o  ARC-Seal (referred to below as "AS"): highly similar in structure
      and format to a DKIM-Signature, this field applies a digital
      signature that protects the integrity of all three of these new
      fields when they are added by an ADMD, plus all instances of these
      fields added by prior ADMDs.

   A distinguishing feature of all of these is that an ARC participant
   always adds all of them before relaying a message to the next
   handling agent en route to its destination.  Moreover, as described
   in Section 4, they each have an "instance" number that increases with
   each ADMD in the handling chain so that their original order can be
   preserved and the three related header fields can be processed as a
   group.

3.  Definitions and Terminology

   This section defines terms used in the rest of the document.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Because many of the core concepts and definitions are found in
   [RFC5598], readers SHOULD to be familiar with the contents of
   [RFC5598], and in particular, the potential roles of intermediaries
   in the delivery of email.

   Syntax descriptions use Augmented BNF (ABNF) [RFC5234].

   o  "ARC set" - A single group of the header fields introduced in
      Section 2 is called an "ARC set".




Andersen, et al.         Expires March 10, 2018                 [Page 5]


Internet-Draft                ARC-Protocol                September 2017


   o  "ARC chain" - The complete sequence of these groups (ARC sets) is
      called an "Authenticated Received Chain" or merely an "ARC chain".
      Although the "Received" header field is typically not included in
      the signed content, the name is based on the notion that this is
      in essence a cryptographically signed series of header fields that
      attest to the handling chain of a message much as Received fields
      always have.

3.1.  Referenced Definitions

   The following terms are defined in other RFCs.  Those definitions can
   be found as follows:

   o  ADMD - [RFC5598], Section 2.3

   o  MTA - [RFC5598], Section 4.3.2

   o  MSA - [RFC5598], Section 4.3.1

   o  MDA - [RFC5598], Section 4.3.3

   The three header fields that are part of this specification borrow
   heavily from existing specifications.  Rather than repeating all of
   the formal definitions that are being reused in ARC, this document
   only describes and specifies changes in syntax and semantics.

   Language, syntax, and other details are imported from DKIM [RFC6376].
   Specific references can be found below.

4.  Instance ('i=') Tag

   The header fields comprising a single ARC set are identified by the
   presence of a string in the value portion of the header field that
   complies with the "tag-spec" ABNF found in Section 3.2 of [RFC6376].
   The tag-name is "i" and the value is the text representation of a
   positive integer, indicating the position in the ARC sequence this
   set occupies, where the first ARC set is numbered 1.  In ABNF terms:

      instance = [FWS] %x69 [FWS] "=" [FWS] position [FWS] ";"
      position = 1*DIGIT

   Valid ARC sets must have exactly one instance of each header field
   for a given position value.  (Note that when multiple algorithms are
   supported, there is some nuance to this statement - see Section 11.)

   Because the AMS and AS header field values are made up of tag-spec
   constructs, the i= tag may be found anywhere within the header field
   value, but is represented throughout this spec in the initial



Andersen, et al.         Expires March 10, 2018                 [Page 6]


Internet-Draft                ARC-Protocol                September 2017


   position for convenience.  Implementers are encouraged to place the
   i= tag at the beginning of the field value to facilitate human
   inspection of the headers.

4.1.  Valid Range for Instance Tags

   The 'i' tag value can range from 1-1024 (inclusive).

   ARC implementations MUST support at least ten (10) ARC sets.

   An effective operational maximum will have to be developed through
   deployment experience in the field and will be documented within
   [ARC-USAGE] once determined.

   ARC chains with more than the defined operational maximum count MAY
   be marked with "cv=fail".

5.  The ARC Header Fields

5.1.  ARC-Authentication-Results (AAR)

   The ARC-Authentication-Results header field is syntactically and
   semantically identical to an Authentication-Results header field
   (defined in Section 2.2 of [RFC7601] (A-R)), except for one mandatory
   addition and several optional data fields.  These deviations are:

   o  There is an "i" tag, as described in Section 4; and

   o  Two (or more) additional pieces of information MAY be added (see
      Section 5.1.1).

   The instance identifier MUST be separated from the rest of the
   Authentication-Results value contents with a semi-colon (';', 0x3b).

   The purpose of this header field is to incorporate into the record
   the success or failure of any authentication done on the message
   upstream of the participating ADMD that is validating and continuing
   the authentication chain.

   The AAR MUST contain all A-R results from within the participating
   ADMD, regardless of how many A-R headers are on the message.

5.1.1.  Additional Information for the AAR Header

   An ARC signer generates this field in the same way that a
   conventional A-R field would be generated.  Because the AAR is
   designed for machine-based consumption over the course of a message's
   transit through a series of mediators and to facilitate



Andersen, et al.         Expires March 10, 2018                 [Page 7]


Internet-Draft                ARC-Protocol                September 2017


   troubleshooting of problematic sources by sending organizations,
   three additional fields of data SHOULD be added to the normal A-R
   content, dependent on the presence of DKIM-Signature and/or ARC
   set(s) and if available to the ADMD which is recording the A-R:

   o  smtp.client_id - The connecting client IP address from which the
      message was received;

   o  header.ds - The domain/selector pair for each dkim signature on
      the message (header.ds=example.com,selector)

   o  arc.closest_fail - The hop number of the most recent AMS that
      fails to validate, or 0 if all hops pass.

5.2.  ARC-Message-Signature (AMS)

   The ARC-Message-Signature header field is syntactically and
   semantically identical to a DKIM-Signature header field [RFC6376],
   with the following exceptions:

   o  There is an "i" tag, as described in Section 4.

   o  There is no "v" tag.

   ARC-Seal header fields MUST NOT be included in the content covered by
   the signature in this header field.

   The AMS SHOULD include any DKIM-Signature header fields already
   present on the message in the header fields covered by this
   signature.

   The AMS header field MAY include (sign) the AAR header field(s).

   Authentication-Results header fields SHOULD NOT be included since
   they are likely to be deleted by downstream ADMDs (per Section XXX of
   [RFC7601]), thereby breaking the AMS signature.

   As with a DKIM-Signature, the purpose of this header field is to
   allow the ADMD generating it to take some responsibility for handling
   this message as it progresses toward delivery.

5.3.  ARC-Seal (AS)

   The ARC-Seal header field is syntactically and semantically similar
   to a DKIM-Signature field, with the following exceptions:

   o  There is an "i" tag, as described in Section 4.




Andersen, et al.         Expires March 10, 2018                 [Page 8]


Internet-Draft                ARC-Protocol                September 2017


   o  The ARC-Seal covers none of the body content of the message.  It
      only covers specific header fields.  (See below: Section 5.3.2.)
      As a result, no body canonicalization is done.  Further, only
      "relaxed" header canonicalization (Section 3.4.2 of [RFC6376]) is
      used.

   o  The only supported tags are "i" (Section 4 supercedes the
      [RFC6376] definition), and "a", "b", "d, "s", "t".  The latter 5
      tag definitions are copied from Section 3.5 of [RFC6376].

   o  An additional tag, "cv" is defined.  (See below: Section 5.3.1)

5.3.1.  The 'cv' Tag

   A new tag "cv" (chain validation) indicates the the outcome of
   evaluating the existing ARC chain upon arrival at the ADMD that is
   adding this header field.  It accepts one of three possible values:

   o  none: There was no chain on the message when it arrived for
      validation; typically occurs when the message arrives at a Message
      Transfer Agent (MTA) from a Message Submission Agent (MSA) or when
      any upstream MTAs may not be participating in ARC handling;

   o  fail: The message has a chain whose validation failed;

   o  pass: The message has a chain whose validation succeeded.

   In ABNF terms:

    seal-cv-tag = %x63.76 [FWS] "=" [FWS] ("none" / "fail" / "pass")

5.3.2.  Selected Header Fields

   [[ Note: reword sentence 1 per Dave's comments ]]

   The ARC-Seal signature is a signature of the hash of the
   concatenation of the canonicalized form of the ARC sets present on
   the message at the time of sealing, in increasing instance order,
   starting at 1, including the one being added at the time of sealing
   the message.

   Within a set, the header fields are listed in the following order:

   1.  ARC-Authentication-Results

   2.  ARC-Message-Signature

   3.  ARC-Seal



Andersen, et al.         Expires March 10, 2018                 [Page 9]


Internet-Draft                ARC-Protocol                September 2017


   Where the ARC-Seal is the one being generated, it is input to the
   hash function in its final form except with an empty "b=" value, in
   the same manner by which a DKIM-Signature signs itself.

   Note that the signing scope for the ARC-Seal is modified in the
   situation where a chain has failed validation (see Section 9.3).

6.  Verifier Actions

   The verifier takes the following steps to determine the current state
   of the ARC chain on the message.  Canonicalization, hash functions,
   and signature validation methods are imported from Section 5 of
   [RFC6376].

   [[ Note: need markdown flag to have subordinate numbering distinction
   ]]

   1.  Collect all ARC sets currently on the message.  If there were
       none, the ARC state is "none" and the algorithm stops here.

   2.  If the form of any ARC set is invalid (e.g., does not contain
       exactly one of each of the three ARC-specific header fields),
       then the chain state is "fail" and the algorithm stops here.

       1.  To avoid the overhead of unnecessary computation and delay
           from crypto and DNS operations, the cv value for all ARC-
           Seal(s) MAY be checked at this point.  If any of the values
           are "fail", then the overall state of the chain is "fail" and
           the algorithm stops here.

   3.  Conduct verification of the ARC-Message-Signature header field
       bearing the highest instance number.  If this verification fails,
       then the chain state is "fail" and the algorithm stops here.

   4.  For each ARC-Seal from the "N"th instance to the first, apply the
       following logic:

       1.  If the value of the "cv" tag on that seal is "fail", the
           chain state is "fail" and the algorithm stops here.  (This
           step SHOULD be skipped if the earlier step (2.1) was
           performed)

       2.  In Boolean nomenclature: if ((i == 1 && cv != "none") or (cv
           == "none" && i != 1)) then the chain state is "fail" and the
           algorithm stops here (note that the ordering of the logic is
           structured for short-circuit evaluation).





Andersen, et al.         Expires March 10, 2018                [Page 10]


Internet-Draft                ARC-Protocol                September 2017


       3.  Initialize a hash function corresponding to the "a" tag of
           the ARC-Seal.

       4.  Compute the canonicalized form of the ARC header fields, in
           the order described in Section 5.3.2, using the "relaxed"
           header canonicalization defined in Section 3.4.2 of
           [RFC6376].  Pass the canonicalized result to the hash
           function.

       5.  Retrieve the final digest from the hash function.

       6.  Retrieve the public key identified by the "s" and "d" tags in
           the ARC-Seal, as described in Section 8.

       7.  Determine whether the signature portion ("b" tag) of the ARC-
           Seal and the digest computed above are valid according to the
           public key.  (See also Section Section 9.4 for failure case
           handling)

       8.  If the signature is not valid, the chain state is "fail" and
           the algorithm stops here.

   5.  If all seals pass validation, then the chain state is "pass", and
       the algorithm is complete.

   [[ Note from Dave: possibly delete the following paragraph as it is
   more usage/procedural than specification guidance.  KA: It was added
   to clarify the separation of the verification and signing steps as
   some of the initial implementations failed to realize that they were
   not necessarily done in one fell swoop. ]]

   The verifier should save the cv state for subsequent use by any
   sealing which may be done later (potentially after message
   modification) within the same trust boundary.  The cv state may be
   recorded by sealing at the time of verification in an initial ARC set
   (for the ADMD) or may be recorded out of band depending on the
   architecture of the ADMD.

7.  Signer Actions

   [[ Note from Dave: This seems more like implementation guidance than
   specification detail.  KA: see explanation just above referring to
   the previous note. ]]

   This section includes a specification of the actions an ARC signer
   takes when presented with a message.

   The signer MUST undertake the following steps:



Andersen, et al.         Expires March 10, 2018                [Page 11]


Internet-Draft                ARC-Protocol                September 2017


   1.  Before creating an ARC signature, perform any other, normal
       authentication and/or signing, so that the ARC signature can
       cover those results.

   2.  Build and attach the new ARC set:

       1.  If an ARC chain exists on the message, then set "N" equal to
           the highest instance number found on the chain (i=);
           otherwise set "N" equal to zero for the following steps.

       2.  Generate and attach to the message an ARC-Authentication-
           Results header field using instance number N+1 and the same
           content from the previous step.

       3.  Generate and attach to the message an ARC-Message-Signature
           header field as defined in Section 5.2 above, using instance
           number N+1.

       4.  Generate and attach to the message an ARC-Seal header field
           using the general algorithm described in Section 5.3 above,
           the chain validation status as determined in Section 6, and
           instance number N+1.

8.  Key Management

   The public keys for ARC header fields follow the same requirements,
   syntax and semantics as those for DKIM signatures, described in
   Section 3.6 of [RFC6376].  For operational convenience, signers MAY
   choose to use selectors and/or domains for the ARC header field
   signatures that are distinct from those used in DKIM signing.

9.  Usage of ARC and Chain Validity

9.1.  Relationship between DKIM-Signature and AMS signing scopes

   DKIM-Signatures SHOULD never sign any ARC header fields.

   [[ KA: Response to Dave's concern: If DKIM covers ARC and ARC covers
   DKIM, which comes first?  The chicken or the egg?  I'm open to
   alternate ways to phrase this without opening the "modifying the DKIM
   spec" can of worms. ]]

9.2.  Assessing Chain Validity Violations

   Email transit can produce broken signatures for a wide variety of
   benign reasons.  This includes possibly breaking one or more ARC
   signatures.  Therefore, receivers need to be wary of ascribing motive




Andersen, et al.         Expires March 10, 2018                [Page 12]


Internet-Draft                ARC-Protocol                September 2017


   to such breakage although patterns of common behaviour may provide
   some basis for adjusting local policy decisions.

   ARC does not attempt to protect an entire message.  There are various
   ways that a message can still be problematic, in spite of having a
   valid ARC chain.  Consequently, all normal, content-based analysis
   SHOULD still be performed on any message having a valid chain of ARC
   header sets.

9.3.  Marking and Sealing "cv=fail" (Invalid) Chains

   The header fields signed by the AS header field b= value in the case
   of a chain failure MUST be only the matching 'i=' instance headers
   created by the MTA which detected the malformed chain, as if this
   newest ARC set was the only set present.

9.4.  Handling DNS Problems While Validating ARC

   DNS-based failures to verify a chain are treated no differently than
   any other ARC violation.  They result in a "cv=fail" verdict.

9.5.  Responding to ARC Validity Violations

   If a receiver determines that the ARC chain has failed, the receiver
   MAY signal the breakage through the extended SMTP response code 5.7.7
   [RFC3463] "message integrity failure" [ENHANCED-STATUS] and
   corresponding SMTP response code.

10.  Recording and Reporting the Results of ARC Evaluation

   The evaluation of an ARC chain provides information which will be
   useful to both the receiver (or intermediary) and to the initial
   sender of the message.  This information should be preserved and
   reported as follows.

10.1.  Information from an ARC Evaluation

   The evaluation of an ARC chain produces a list of domain names for
   participating intermediaries which handled the message, to wit:

   o  A list of the "d=" domains found in the validated ARC-Seal header
      fields

   o  The "d=" domain found in the most recent (highest instance number)
      AMS header field (since that is the only one necessarily
      validated)





Andersen, et al.         Expires March 10, 2018                [Page 13]


Internet-Draft                ARC-Protocol                September 2017


   In the case of a failed chain, only the terminal ARC set is covered
   by the ARC-Seal so the reporting is limited to the findings in that
   terminal ARC set.

10.2.  Recording (local) ARC Evaluation Results

   Receivers MAY add an "arc=[pass|fail|policy]" method annotation into
   a locally-affixed Authentication-Results [RFC7601] header field along
   with any salient comment(s).

   Details of the ARC chain which was evaluated should be included in
   the Authentication-Results and AAR headers per Section Section 5.1.1.

10.3.  DMARC Reporting of ARC Findings - Interim

   [[ Note: Discussion on the IETF DMARC-WG list has indicated some
   interest in more substantial reporting for analytic purposes.  To
   support that effort, the following guidance is provided only as an
   interim, minimal data set.  A more complete reporting construct will
   be specified in a related spec - TBD. (see the additional fields
   specified in Section 5.1.1) ]]

   Receivers SHOULD indicate situations in which ARC evaluation
   influenced the results of their local policy determination.  DMARC
   reporting of ARC-informed decisions can be accomplished by adding a
   local_policy comment explanation containing the list of data
   discovered in the ARC evaluation (Section 10.1 and Section 5.1.1):

 <policy_evaluated>
   <disposition>delivered</disposition>
   <dkim>fail</dkim>
   <spf>fail <comment>source.ip=10.0.0.1</comment></spf>
   <reason>
    <type>local_policy</type>
    <comment>arc=pass ams[2].d=d2.example ams[2].s=s1 as[2].d=d2.example
      as[2].s=s2 as[1].d=d1.example as[1].s=s3</comment>
   </reason>
 </policy_evaluated>

   In the suggested sample, d2.example is the sealing domain for ARC[2]
   and d1.example is the sealing domain for ARC[1].

   Mediators SHOULD generate DMARC reports on messages which transit
   their system just like any other message which they receive.  This
   will result in multiple reports for each mediated message as they
   transit the series of handlers.  DMARC report consumers should be
   aware of this behaviour and make the necessary accommodations.




Andersen, et al.         Expires March 10, 2018                [Page 14]


Internet-Draft                ARC-Protocol                September 2017


11.  Supporting Alternate Signing Algorithms

   [[ Note: Some additional development of this section is needed. ]]

   In the following branch diagrams, each algorithm is represented by an
   'A' or 'B' at each hop to depict the ARC chain that develops over a
   five hop scenario.  'x' represents a hop that does not support that
   algorithm.

   Note that during a transitional period where multiple algorithms are
   allowed, all of the statements in this spec which refer to "exactly
   one set of ARC headers per instance" need to be understood as "at
   least one set per instance and no more than one instance-set per
   algorithm".

11.1.  Introductory Period

   Intermediaries MUST be able to validate ARC chains built with either
   algorithm but MAY create ARC sets with either (or both) algorithm.

   The introductory period should be at least six (6) months.

11.2.  Co-Existence Period

   Intermediaries MUST be able to validate ARC chains build with either
   algorithm and MUST create ARC sets with both algorithms.  Chains
   ending with either algorithm may be used for the result.

11.3.  Deprecation Period

   ARC sets built with algorithms that are being deprecated MAY be
   considered valid within an ARC chain, however, intermediaries MUST
   NOT create additional sets with the deprecated algorithm.

   The deprecation period should be at least two (2) years.

11.4.  Obsolescence Period

   ARC sets built with algorithms that are obsolete MUST NOT be
   considered valid within an ARC chain.  Intermediaries MUST NOT create
   any sets with any obsoleted algorithm.

12.  Privacy Considerations

   The ARC chain provides a verifiable record of the handlers for a
   message.  Anonymous remailers will probably not find this compatible
   with their operating goals.




Andersen, et al.         Expires March 10, 2018                [Page 15]


Internet-Draft                ARC-Protocol                September 2017


13.  IANA Considerations

   This specification adds three new header fields as defined below.

13.1.  Authentication-Results Method Registry Update

   This draft adds one item to the IANA "Email Authentication Methods"
   registry:

   o  Method : arc

      Defined: [I-D.ARC]

      ptype: header

      Property: chain evaluation result

      Value: chain evaluation result status (see Section 5.3)

      Status: active

      Version: 1

13.2.  Definitions of the ARC header fields

   This specification adds three new header fields to the "Permanent
   Message Header Field Registry", as follows:

   o  Header field name: ARC-Seal

      Applicable protocol: mail

      Status: draft

      Author/Change controller: IETF

      Specification document(s): [I-D.ARC]

      Related information: [RFC6376]

   o  Header field name: ARC-Message-Signature

      Applicable protocol: mail

      Status: draft

      Author/Change controller: IETF




Andersen, et al.         Expires March 10, 2018                [Page 16]


Internet-Draft                ARC-Protocol                September 2017


      Specification document(s): [I-D.ARC]

      Related information: [RFC6376]

   o  Header field name: ARC-Authentication-Results

      Applicable protocol: mail

      Status: standard

      Author/Change controller: IETF

      Specification document(s): [I-D.ARC]

      Related information: [RFC7601]

14.  Security Considerations

   The Security Considerations of [RFC6376] and [RFC7601] apply directly
   to this specification.

   Inclusion of ARC sets in the header of emails may cause problems for
   some older or more constrained MTAs if they are unable to accept the
   greater size of the header.

   Operators who receive a message bearing N ARC sets have to complete
   up to N+1 DNS queries to evaluate the chain (barring DNS redirection
   mechanisms which can increase the lookups for a given target value).
   This has at least two effects:

   1.  An attacker can send a message to an ARC partipant with a
       concocted sequence of ARC sets bearing the domains of intended
       victims, and all of them will be queried by the participant until
       a failure is discovered.  The difficulty of forging the signature
       values should limit the extent of this load to domains under
       control of the attacker.

   2.  DKIM only does one DNS check per signature, while this one can do
       many (per chain).  Absent caching, slow DNS responses can cause
       SMTP timeouts; and backlogged delivery queues on mediating
       systems.  This could be exploited as a DoS attack.

14.1.  Message Content Suspicion

   Recipients are cautioned to treat messages bearing ARC sets with the
   same suspicion that they apply to all other email messages.  This
   includes appropriate content scanning and other checks for
   potentially malicious content.  The handlers which are identified



Andersen, et al.         Expires March 10, 2018                [Page 17]


Internet-Draft                ARC-Protocol                September 2017


   within the ARC chain may be used to provide input to local policy
   engines in cases where DMARC validation fails (due to mediation
   impacting SPF attribution, DKIM validity or alignment).

15.  Implementation Status

   [[ Note: For minimizing section number references when the RFC editor
   removes this section, it has been moved to be the last section of the
   document before the Appendicies. ]]

   [[ Note to the RFC Editor: Please remove this section before
   publication along with the reference to [RFC6982]. ]]

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in [RFC6982].
   The description of implementations in this section is intended to
   assist the IETF in its decision processes in progressing drafts to
   RFCs.  Please note that the listing of any individual implementation
   here does not imply endorsement by the IETF.  Furthermore, no effort
   has been spent to verify the information presented here that was
   supplied by IETF contributors.  This is not intended as, and must not
   be construed to be, a catalog of available implementations or their
   features.  Readers are advised to note that other implementations may
   exist.

   This information is known to be correct as of the seventh
   interoperability test event which was held on 2017-07-15 & 16 at
   IETF99.

15.1.  GMail test reflector and incoming validation

   Organization: Google

   Description: Internal production implementation with both debug
   analysis and validating + sealing pass-through function

   Status of Operation: Production - Incoming Validation

   Coverage: Full spec implemented as of [ARC-DRAFT-06]

   Licensing: Proprietary - Internal only

   Implementation Notes:

   o  Full functionality was demonstrated during the interop testing on
      2017-07-15.




Andersen, et al.         Expires March 10, 2018                [Page 18]


Internet-Draft                ARC-Protocol                September 2017


   Contact Info: arc-discuss@dmarc.org [1]

15.2.  AOL test reflector and internal tagging

   Organization: AOL

   Description: Internal prototype implementation with both debug
   analysis and validating + sealing pass-through function

   Status of Operation: Beta

   Coverage: ARC chain validity status checking is operational, but only
   applied to email addresses enrolled in the test program.  This system
   conforms to [ARC-DRAFT-06]

   Licensing: Proprietary - Internal only

   Implementation Notes:

   o  2017-07-15: Full functionality verified during the interop
      testing.

   Contact Info: arc-discuss@dmarc.org [2]

15.3.  dkimpy

   Organization: dkimpy developers/Scott Kitterman

   Description: Python DKIM package

   Status of Operation: Production

   Coverage:

   o  2017-07-15: The internal test suite is incomplete, but the command
      line developmental version of validator was demonstrated to
      interoperate with the Google and AOL implementations during the
      interop on 2017-07-15 and the released version passes the tests in
      [ARC-TEST] (https://github.com/ValiMail/arc_test_suite) with both
      python and python3.

   Licensing: Open/Other (same as dkimpy package = BCD version 2)

   Contact Info: https://launchpad.net/dkimpy







Andersen, et al.         Expires March 10, 2018                [Page 19]


Internet-Draft                ARC-Protocol                September 2017


15.4.  OpenARC

   Organization: TDP/Murray Kucherawy

   Description: Implemention of milter functionality related to the
   OpenDKIM and OpenDMARC packages

   Status of Operation: Beta

   Coverage: Built to support [ARC-DRAFT-06]

   Licensing: Open/Other (same as OpenDKIM and OpenDMARC packages)

   Implementation Notes:

   o  The build is FreeBSD oriented but some packages have been built
      for easier deployment on RedHat-based Linux platforms.

   o  2017-07-15: Testing showed problems with the hash calculation for
      the AMS header b= field.  Several other bugs were discovered and
      were either fixed during the following week of IETF meetings or
      are under active repair.

   o  Some issues still exist when deploying in a chained milter
      arrangement (such as OpenSPF -> OpenDKIM -> OpenDMARC -> OpenARC)
      with coordination between the stages.  When deployed in a
      "sandwich" configuration around an MLM, there is no effective
      mechanism to convey trust from the ingress (validator) to egress
      (signer) instances.

   Contact Info: arc-discuss@dmarc.org [3]

15.5.  Mailman 3.1+ patch

   Organization: Mailman development team

   Description: Integrated ARC capabilities within the Mailman 3.1+
   package

   Status of Operation: Patch submitted

   Coverage: Unknown

   Licensing: Same as mailman package - GPL

   Implementation Notes:





Andersen, et al.         Expires March 10, 2018                [Page 20]


Internet-Draft                ARC-Protocol                September 2017


   o  Appears to work properly in at least one beta deployment, but
      waiting on acceptance of the pull request into the mainline of
      mailman development

   Contact Info: https://www.gnu.org/software/mailman/contact.html

15.6.  Copernica/MailerQ web-based validation

   Organization: Copernica

   Description: Web-based validation of ARC-signed messages

   Status of Operation: Beta

   Coverage: Built to support [ARC-DRAFT-05]

   Licensing: On-line usage only

   Implementation Notes:

   o  Released 2016-10-24

   o  Requires full message content to be pasted into a web form found
      at http://arc.mailerq.com/ (warning - https is not supported).

   o  An additional instance of an ARC signature can be added if one is
      willing to paste a private key into an unsecured web form.

   o  2017-07-15: Testing shows that results match the other
      implementations listed in this section.

   Contact Info: https://www.copernica.com/

15.7.  Rspamd

   Organization: Rspamd community

   Description: ARC signing and verification module

   Status of Operation: Production, though deployment usage is unknown

   Coverage: Built to support [ARC-DRAFT-06]

   Licensing: Open source

   Implementation Notes:

   o  2017-06-12: Released with version 1.6.0



Andersen, et al.         Expires March 10, 2018                [Page 21]


Internet-Draft                ARC-Protocol                September 2017


   o  2017-07-15: Testing during the interop showed that the validation
      functionality interoperated with the Google, AOL, dkimpy and
      MailerQ implementations

   Contact Info: https://rspamd.com/doc/modules/arc.html and
   https://github.com/vstakhov/rspamd

15.8.  PERL Mail::Milter::Authentication module

   Organization: FastMail

   Description: Email domain authentication milter, previously included
   SPF / DKIM / DMARC, now has ARC added

   Status of Operation: Intial validation completed during IETF99
   hackathon with some follow-on work during the week

   Coverage: Built to support [I-D.ARC]

   Licensing: Open Source

   Implementation Notes:

   o  2017-07-15: Validation functionality which interoperates with
      Gmail, AOL, dkimpy was demonstrated; later in the week of IETF99,
      the signing functionality was reported to be working

   o  2017-07-20: ARC functionality has not yet been pushed back to the
      github repo but should be showing up soon

   Contact Info: https://github.com/fastmail/authentication_milter

16.  References

16.1.  Normative References

   [RFC1345]  Simonsen, K., "Character Mnemonics and Character Sets",
              RFC 1345, DOI 10.17487/RFC1345, June 1992,
              <https://www.rfc-editor.org/info/rfc1345>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2142]  Crocker, D., "Mailbox Names for Common Services, Roles and
              Functions", RFC 2142, DOI 10.17487/RFC2142, May 1997,
              <https://www.rfc-editor.org/info/rfc2142>.



Andersen, et al.         Expires March 10, 2018                [Page 22]


Internet-Draft                ARC-Protocol                September 2017


   [RFC2606]  Eastlake 3rd, D. and A. Panitz, "Reserved Top Level DNS
              Names", BCP 32, RFC 2606, DOI 10.17487/RFC2606, June 1999,
              <https://www.rfc-editor.org/info/rfc2606>.

   [RFC3463]  Vaudreuil, G., "Enhanced Mail System Status Codes",
              RFC 3463, DOI 10.17487/RFC3463, January 2003,
              <https://www.rfc-editor.org/info/rfc3463>.

   [RFC4686]  Fenton, J., "Analysis of Threats Motivating DomainKeys
              Identified Mail (DKIM)", RFC 4686, DOI 10.17487/RFC4686,
              September 2006, <https://www.rfc-editor.org/info/rfc4686>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", RFC 5226,
              DOI 10.17487/RFC5226, May 2008,
              <https://www.rfc-editor.org/info/rfc5226>.

   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <https://www.rfc-editor.org/info/rfc5234>.

   [RFC5321]  Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
              DOI 10.17487/RFC5321, October 2008,
              <https://www.rfc-editor.org/info/rfc5321>.

   [RFC5322]  Resnick, P., Ed., "Internet Message Format", RFC 5322,
              DOI 10.17487/RFC5322, October 2008,
              <https://www.rfc-editor.org/info/rfc5322>.

   [RFC5585]  Hansen, T., Crocker, D., and P. Hallam-Baker, "DomainKeys
              Identified Mail (DKIM) Service Overview", RFC 5585,
              DOI 10.17487/RFC5585, July 2009,
              <https://www.rfc-editor.org/info/rfc5585>.

   [RFC5598]  Crocker, D., "Internet Mail Architecture", RFC 5598,
              DOI 10.17487/RFC5598, July 2009,
              <https://www.rfc-editor.org/info/rfc5598>.

   [RFC5863]  Hansen, T., Siegel, E., Hallam-Baker, P., and D. Crocker,
              "DomainKeys Identified Mail (DKIM) Development,
              Deployment, and Operations", RFC 5863,
              DOI 10.17487/RFC5863, May 2010,
              <https://www.rfc-editor.org/info/rfc5863>.







Andersen, et al.         Expires March 10, 2018                [Page 23]


Internet-Draft                ARC-Protocol                September 2017


   [RFC6376]  Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed.,
              "DomainKeys Identified Mail (DKIM) Signatures", STD 76,
              RFC 6376, DOI 10.17487/RFC6376, September 2011,
              <https://www.rfc-editor.org/info/rfc6376>.

   [RFC6377]  Kucherawy, M., "DomainKeys Identified Mail (DKIM) and
              Mailing Lists", BCP 167, RFC 6377, DOI 10.17487/RFC6377,
              September 2011, <https://www.rfc-editor.org/info/rfc6377>.

   [RFC6651]  Kucherawy, M., "Extensions to DomainKeys Identified Mail
              (DKIM) for Failure Reporting", RFC 6651,
              DOI 10.17487/RFC6651, June 2012,
              <https://www.rfc-editor.org/info/rfc6651>.

   [RFC7208]  Kitterman, S., "Sender Policy Framework (SPF) for
              Authorizing Use of Domains in Email, Version 1", RFC 7208,
              DOI 10.17487/RFC7208, April 2014,
              <https://www.rfc-editor.org/info/rfc7208>.

   [RFC7601]  Kucherawy, M., "Message Header Field for Indicating
              Message Authentication Status", RFC 7601,
              DOI 10.17487/RFC7601, August 2015,
              <https://www.rfc-editor.org/info/rfc7601>.

16.2.  Informative References

   [ARC-DRAFT-05]
              Andersen, K., Long, B., and S. Jones, "Authenticated
              Received Chain (ARC) Protocol (I-D-06)", n.d.,
              <https://tools.ietf.org/html/
              draft-ietf-dmarc-arc-protocol-06>.

   [ARC-DRAFT-06]
              Andersen, K., Long, B., and S. Jones, "Authenticated
              Received Chain (ARC) Protocol (I-D-05)", n.d.,
              <https://tools.ietf.org/html/
              draft-ietf-dmarc-arc-protocol-05>.

   [ARC-TEST]
              Blank, S., "ARC Test Suite", January 2017,
              <https://github.com/ValiMail/arc_test_suite>.

   [ARC-USAGE]
              Jones, S., Adams, T., Rae-Grant, J., and K. Andersen,
              "Recommended Usage of the ARC Headers", December 2017,
              <https://tools.ietf.org/html/
              draft-ietf-dmarc-arc-usage-01>.




Andersen, et al.         Expires March 10, 2018                [Page 24]


Internet-Draft                ARC-Protocol                September 2017


   [ENHANCED-STATUS]
              "IANA SMTP Enhanced Status Codes", n.d.,
              <http://www.iana.org/assignments/smtp-enhanced-status-
              codes/smtp-enhanced-status-codes.xhtml>.

   [RFC6982]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", RFC 6982,
              DOI 10.17487/RFC6982, July 2013,
              <https://www.rfc-editor.org/info/rfc6982>.

   [RFC7489]  Kucherawy, M., Ed. and E. Zwicky, Ed., "Domain-based
              Message Authentication, Reporting, and Conformance
              (DMARC)", RFC 7489, DOI 10.17487/RFC7489, March 2015,
              <https://www.rfc-editor.org/info/rfc7489>.

   [RFC7960]  Martin, F., Ed., Lear, E., Ed., Draegen. Ed., T., Zwicky,
              E., Ed., and K. Andersen, Ed., "Interoperability Issues
              between Domain-based Message Authentication, Reporting,
              and Conformance (DMARC) and Indirect Email Flows",
              RFC 7960, DOI 10.17487/RFC7960, September 2016,
              <https://www.rfc-editor.org/info/rfc7960>.

16.3.  URIs

   [1] mailto:arc-discuss@dmarc.org

   [2] mailto:arc-discuss@dmarc.org

   [3] mailto:arc-discuss@dmarc.org

   [4] mailto:dmarc@ietf.org

   [5] mailto:arc-discuss@dmarc.org

Appendix A.  Appendix A - Design Requirements

   (This section is re-inserted for background information from
   [ARC-DRAFT-06] and earlier versions.)

   The specification of the ARC framework is driven by the following
   high-level goals, security considerations, and practical operational
   requirements.

A.1.  Primary Design Criteria

   o  Provide a verifiable "chain of custody" for email messages;

   o  Not require changes for originators of email;



Andersen, et al.         Expires March 10, 2018                [Page 25]


Internet-Draft                ARC-Protocol                September 2017


   o  Support the verification of the ARC header field set by each hop
      in the handling chain;

   o  Work at Internet scale; and

   o  Provide a trustable mechanism for the communication of
      Authentication-Results across trust boundaries.

A.2.  Out of Scope

   ARC is not a trust framework.  Users of the ARC header fields are
   cautioned against making unsubstantiated conclusions when
   encountering a "broken" ARC sequence.

Appendix B.  Appendix B - Example Usage

   [[ Note: The following examples were mocked up early in the
   definition process for the spec.  They no longer reflect the current
   definition and need various updates which will be included in a
   future draft. ]]

   (Obsolete but retained for illustrative purposes)

B.1.  Example 1: Simple mailing list

B.1.1.  Here's the message as it exits the Origin:

























Andersen, et al.         Expires March 10, 2018                [Page 26]


Internet-Draft                ARC-Protocol                September 2017


 Return-Path: <jqd@d1.example>
 Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
     (authenticated bits=0)
     by segv.d1.example with ESMTP id t0FN4a8O084569;
     Thu, 14 Jan 2015 15:00:01 -0800 (PST)
     (envelope-from jqd@d1.example)
 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
     s=20130426; t=1421363082;
     bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
     h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
      Content-Transfer-Encoding;
     b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrvQw
      bv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3TRJl
      gotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
 Message-ID: <54B84785.1060301@d1.example>
 Date: Thu, 14 Jan 2015 15:00:01 -0800
 From: John Q Doe <jqd@d1.example>
 To: arc@dmarc.org
 Subject: Example 1

 Hey gang,
 This is a test message.
 --J.

B.1.2.  Message is then received at example.org

B.1.2.1.  Example 1, Step A: Message forwarded to list members

   Processing at example.org:

   o  example.org performs authentication checks

   o  No previous Authentication-Results or ARC-Seal headers are present

   o  example.org adds ARC-Authentication-Results header

   o  example.org adds Received: header

   o  example.org adds a ARC-Seal header

   Here's the message as it exits example.org:










Andersen, et al.         Expires March 10, 2018                [Page 27]


Internet-Draft                ARC-Protocol                September 2017


 Return-Path: <jqd@d1.example>
 ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
     s=seal2015; d=example.org; cv=none;
     b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
      TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
      EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
 ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
     d=example.org; s=clochette; t=1421363105;
     bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
     h=List-Id:List-Unsubscribe:List-Archive:List-Post:
      List-Help:List-Subscribe:Reply-To:DKIM-Signature;
     b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF1F5
      vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3A+m4bw
      a6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
 Received: from segv.d1.example (segv.d1.example [72.52.75.15])
     by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
     for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
     (envelope-from jqd@d1.example)
 ARC-Authentication-Results: i=1; lists.example.org;
     spf=pass smtp.mfrom=jqd@d1.example;
     dkim=pass (1024-bit key) header.i=@d1.example;
     dmarc=pass
 Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
     (authenticated bits=0)
     by segv.d1.example with ESMTP id t0FN4a8O084569;
     Thu, 14 Jan 2015 15:00:01 -0800 (PST)
     (envelope-from jqd@d1.example)
 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
     s=20130426; t=1421363082;
     bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
     h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
      Content-Transfer-Encoding;
     b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
      vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
      d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
 Message-ID: <54B84785.1060301@d1.example>
 Date: Thu, 14 Jan 2015 15:00:01 -0800
 From: John Q Doe <jqd@d1.example>
 To: arc@example.org
 Subject: [Lists] Example 1

 Hey gang,
 This is a test message.
 --J.







Andersen, et al.         Expires March 10, 2018                [Page 28]


Internet-Draft                ARC-Protocol                September 2017


B.1.3.  Example 1: Message received by Recipient

   Let's say that the Recipient is example.com

   Processing at example.com:

   o  example.com performs usual authentication checks

   o  example.com adds Authentication-Results: header, Received header

   o  Determines that message fails DMARC

   o  Checks for ARC-Seal: header; finds one

   o  Validates the signature in the ARC-Seal: header, which covers the
      ARC-Authentication-Results: header

   o  example.com can use the ARC-Authentication-Results values or
      verify the DKIM-Signature from lists.example.org

   Here's what the message looks like at this point:

 Return-Path: <jqd@d1.example>
 Received: from example.org (example.org [208.69.40.157])
     by clothilde.example.com with ESMTP id
     d200mr22663000ykb.93.1421363207
     for <fmartin@example.com>; Thu, 14 Jan 2015 15:02:40 -0800 (PST)
 Authentication-Results: clothilde.example.com; spf=fail
     smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
     header.i=@example.org; dmarc=fail; arc=pass
 ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
     s=seal2015; d=example.org; cv=none;
     b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
      TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
      EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
 ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
     d=example.org; s=clochette; t=1421363105;
     bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
     h=List-Id:List-Unsubscribe:List-Archive:List-Post:
      List-Help:List-Subscribe:Reply-To:DKIM-Signature;
     b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF
      1F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3
      A+m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
 Received: from segv.d1.example (segv.d1.example [72.52.75.15])
     by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
     for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
     (envelope-from jqd@d1.example)
 ARC-Authentication-Results: i=1; lists.example.org;



Andersen, et al.         Expires March 10, 2018                [Page 29]


Internet-Draft                ARC-Protocol                September 2017


     spf=pass smtp.mfrom=jqd@d1.example;
     dkim=pass (1024-bit key) header.i=@d1.example;
     dmarc=pass
 Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
     (authenticated bits=0)
     by segv.d1.example with ESMTP id t0FN4a8O084569;
     Thu, 14 Jan 2015 15:00:01 -0800 (PST)
     (envelope-from jqd@d1.example)
 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
     s=20130426; t=1421363082;
     bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
     h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
      Content-Transfer-Encoding;
     b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrvQw
      bv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3TRJl
      gotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
 Message-ID: <54B84785.1060301@d1.example>
 Date: Thu, 14 Jan 2015 15:00:01 -0800
 From: John Q Doe <jqd@d1.example>
 To: arc@example.org
 Subject: [Lists] Example 1

 Hey gang,
 This is a test message.
 --J.

B.2.  Example 2: Mailing list to forwarded mailbox

B.2.1.  Here's the message as it exits the Origin:






















Andersen, et al.         Expires March 10, 2018                [Page 30]


Internet-Draft                ARC-Protocol                September 2017


 Return-Path: <jqd@d1.example>
 Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
     (authenticated bits=0)
     by segv.d1.example with ESMTP id t0FN4a8O084569;
     Thu, 14 Jan 2015 15:00:01 -0800 (PST)
     (envelope-from jqd@d1.example)
 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
     s=20130426; t=1421363082;
     bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
     h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
      Content-Transfer-Encoding;
     b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrvQw
      bv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3TRJl
      gotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
 Message-ID: <54B84785.1060301@d1.example>
 Date: Thu, 14 Jan 2015 15:00:01 -0800
 From: John Q Doe <jqd@d1.example>
 To: arc@example.org
 Subject: Example 1

 Hey gang,
 This is a test message.
 --J.

B.2.2.  Message is then received at example.org

B.2.2.1.  Example 2, Step A: Message forwarded to list members

   Processing at example.org:

   o  example.org performs authentication checks

   o  example.org applies standard DKIM signature

   o  No previous Authentication-Results or ARC-Seal headers are present

   o  example.org adds ARC-Authentication-Results header

   o  example.org adds usual Received: header

   o  example.org adds a ARC-Seal header

   Here's the message as it exits Step A:








Andersen, et al.         Expires March 10, 2018                [Page 31]


Internet-Draft                ARC-Protocol                September 2017


   Return-Path: <jqd@d1.example>
   ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
       s=seal2015; d=example.org; cv=none;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz6
        1TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L
        69EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
       d=example.org; s=clochette; t=1421363105;
       bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
       h=List-Id:List-Unsubscribe:List-Archive:List-Post:
        List-Help:List-Subscribe:Reply-To:DKIM-Signature;
       b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF
        1F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3
        A+m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
   Received: from segv.d1.example (segv.d1.example [72.52.75.15])
       by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
       for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Authentication-Results: i=1; lists.example.org;
       spf=pass smtp.mfrom=jqd@d1.example;
       dkim=pass (1024-bit key) header.i=@d1.example;
       dmarc=pass
   Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
       (authenticated bits=0)
       by segv.d1.example with ESMTP id t0FN4a8O084569;
       Thu, 14 Jan 2015 15:00:01 -0800 (PST)
       (envelope-from jqd@d1.example)
   DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
       s=20130426; t=1421363082;
       bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
       h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
        Content-Transfer-Encoding;
       b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
        vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
        d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
   Message-ID: <54B84785.1060301@d1.example>
   Date: Thu, 14 Jan 2015 15:00:01 -0800
   From: John Q Doe <jqd@d1.example>
   To: arc@example.org
   Subject: [Lists] Example 1

   Hey gang,
   This is a test message.
   --J.







Andersen, et al.         Expires March 10, 2018                [Page 32]


Internet-Draft                ARC-Protocol                September 2017


B.2.2.2.  Example 2, Step B: Message from list forwarded

   The message is delivered to a mailbox at gmail.com
   Processing at gmail.com:

   o  gmail.com performs usual authentication checks

   o  gmail.com adds Authentication-Results: and Received: header

   o  Determines that message fails DMARC

   o  Checks for ARC-Seal: header; finds one

   o  Validates the signature in the ARC-Seal: header, which covers the
      ARC-Authentication-Results: header

   o  Uses the ARC-Authentication-Results: values, but:

   o  Instead of delivering message, prepares to forward message per
      user settings

   o  Applies usual DKIM signature

   o  gmail.com adds it's own ARC-Seal: header, contents of which are

      *  version

      *  sequence number ("i=2")

      *  hash algorithm (SHA256 as example)

      *  timestamp ("t=")

      *  selector for key ("s=notary01")

      *  domain for key ("d=gmail.com")

      *  headers included in hash ("h=ARC-Authentication-Results:ARC-
         Seal")

      *  Note: algorithm requires only ARC-Seals with lower sequence #
         be included, in ascending order

      *  signature of the header hash

   Here's what the message looks like at this point:

   Return-Path: <jqd@d1.example>



Andersen, et al.         Expires March 10, 2018                [Page 33]


Internet-Draft                ARC-Protocol                September 2017


   ARC-Seal: i=2; a=rsa-sha256; t=1421363253;
       s=notary01; d=gmail.com; cv=pass;
       b=sjHDMriRZ0Mui5eVEOGscRHWbQHcy97lvrduHQ8h+f2CfIrxUiKOE44x3LQwDWR
        YbDjf5fcM9MdcIahC+cP59BQ9Y9DHwMDzwRTnM7NVb4kY+tSaVnLoIOaP9lF/sut
        txO+RRNr0fCFw==
   ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed;
       d=gmail.com; s=20120806;
       h=mime-version:content-type:x-original-sender:
        x-original-authentication-results:precedence:mailing-list:
        list-id:list-post:list-help:list-archive:sender:reply-to:
        list-unsubscribe:DKIM-Signature;
       bh=2+gZwZhUK2V7JbpoO2MTrU19WvhcA4JnjiohFm9ZZ/g=;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0Ab8Oi1ebYV/hIBmfhS
        LF1E80hMPcMijONfTQB6g5Hoh/kE6N2fgp6aSngL/WA3+g3Id8ElhXHvIGcJRFeM
        KdJqiW5cxdqPTRW+BnR5ee6Tzg06kr265NTDIAU8p8fQNuLfZj49MMA+QwDBJtXw
        bQoZyRtb6X6q0mYaszUB8kw==
   Received: by mail-yk0-f179.google.com with SMTP id 19so2728865ykq.10
       for <mailbox@gmail.com>; Thu, 14 Jan 2015 15:02:45 -0800 (PST)
   Authentication-Results: i=2; gmail.com; spf=fail
       smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
       header.i=@example.org; dmarc=fail; arc=pass
   ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
       s=seal2015; d=example.org; cv=none:
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
       d=example.org; s=clochette; t=1421363105;
       bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
       h=List-Id:List-Unsubscribe:List-Archive:List-Post:
        List-Help:List-Subscribe:Reply-To:DKIM-Signature;
       b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF
        1F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3
        A+m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
   Received: from segv.d1.example (segv.d1.example [72.52.75.15])
       by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
       for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Authentication-Results: i=1; lists.example.org;
       spf=pass smtp.mfrom=jqd@d1.example;
       dkim=pass (1024-bit key) header.i=@d1.example;
       dmarc=pass
   Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
       (authenticated bits=0)
       by segv.d1.example with ESMTP id t0FN4a8O084569;
       Thu, 14 Jan 2015 15:00:01 -0800 (PST)



Andersen, et al.         Expires March 10, 2018                [Page 34]


Internet-Draft                ARC-Protocol                September 2017


       (envelope-from jqd@d1.example)
   DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
       s=20130426; t=1421363082;
       bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
       h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
        Content-Transfer-Encoding;
       b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
        vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
        d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
   Message-ID: <54B84785.1060301@d1.example>
   Date: Thu, 14 Jan 2015 15:00:01 -0800
   From: John Q Doe <jqd@d1.example>
   To: arc@example.org
   Subject: [Lists] Example 1

   Hey gang,
   This is a test message.
   --J.

B.2.3.  Example 2: Message received by Recipient

   Let's say that the Recipient is example.com
   Processing at example.com:

   o  example.com performs usual authentication checks

   o  example.com adds Authentication-Results: header, Received header

   o  Determines that message fails DMARC

   o  Checks for ARC-Seal: header; finds two

   o  Validates the signature in the highest numbered ("i=2") ARC-Seal:
      header, which covers all previous ARC-Seal: and ARC-
      Authentication-Results: headers

   o  Validates the other ARC-Seal header ("i=1"), which covers the ARC-
      Authentication-Results: header

   o  example.com uses the ARC-Authentication-Results: values

   Here's what the message looks like at this point:

   Return-Path: <jqd@d1.example>
   Received: from mail-ob0-f188.google.com (mail-ob0-f188.google.com
       [208.69.40.157]) by clothilde.example.com with ESMTP id
       d200mr22663000ykb.93.1421363268
       for <fmartin@example.com>; Thu, 14 Jan 2015 15:03:15 -0800 (PST)



Andersen, et al.         Expires March 10, 2018                [Page 35]


Internet-Draft                ARC-Protocol                September 2017


   Authentication-Results: clothilde.example.com; spf=fail
       smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
       header.i=@gmail.com; dmarc=fail; arc=pass
   ARC-Seal: i=2; a=rsa-sha256; t=1421363253;
       s=notary01; d=gmail.com; cv=pass;
       b=sjHDMriRZ0Mui5eVEOGscRHWbQHcy97lvrduHQ8h+f2CfIrxUiKOE44x3LQwDWR
        YbDjf5fcM9MdcIahC+cP59BQ9Y9DHwMDzwRTnM7NVb4kY+tSaVnLoIOaP9lF/sut
        txO+RRNr0fCFw==
   ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed;
       d=gmail.com; s=20120806;
       h=mime-version:content-type:x-original-sender:
        x-original-authentication-results:precedence:mailing-list:
        list-id:list-post:list-help:list-archive:sender:reply-to:
        :list-unsubscribe:DKIM-Signature;
       bh=2+gZwZhUK2V7JbpoO2MTrU19WvhcA4JnjiohFm9ZZ/g=;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0Ab8Oi1ebYV/hIBmfhS
        LF1E80hMPcMijONfTQB6g5Hoh/kE6N2fgp6aSngL/WA3+g3Id8ElhXHvIGcJRFeM
        KdJqiW5cxdqPTRW+BnR5ee6Tzg06kr265NTDIAU8p8fQNuLfZj49MMA+QwDBJtXw
        bQoZyRtb6X6q0mYaszUB8kw==
   Received: by mail-yk0-f179.google.com with SMTP id 19so2728865ykq.10
       for <mailbox@gmail.com>; Thu, 14 Jan 2015 15:02:45 -0800 (PST)
   Authentication-Results: i=2; gmail.com; spf=fail
       smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
       header.i=@example.org; dmarc=fail; arc=pass
   ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
       s=seal2015; d=example.org; cv=none;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
       d=example.org; s=clochette; t=1421363105;
       bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
       h=List-Id:List-Unsubscribe:List-Archive:List-Post:
        List-Help:List-Subscribe:Reply-To:DKIM-Signature;
       b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF
        1F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3
        A+m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
   Received: from segv.d1.example (segv.d1.example [72.52.75.15])
       by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
       for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Authentication-Results: i=1; lists.example.org;
       spf=pass smtp.mfrom=jqd@d1.example;
       dkim=pass (1024-bit key) header.i=@d1.example;
       dmarc=pass
   Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])



Andersen, et al.         Expires March 10, 2018                [Page 36]


Internet-Draft                ARC-Protocol                September 2017


       (authenticated bits=0)
       by segv.d1.example with ESMTP id t0FN4a8O084569;
       Thu, 14 Jan 2015 15:00:01 -0800 (PST)
       (envelope-from jqd@d1.example)
   DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
       s=20130426; t=1421363082;
       bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
       h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
        Content-Transfer-Encoding;
       b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
        vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
        d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
   Message-ID: <54B84785.1060301@d1.example>
   Date: Thu, 14 Jan 2015 15:00:01 -0800
   From: John Q Doe <jqd@d1.example>
   To: arc@example.org
   Subject: [Lists] Example 1

   Hey gang,
   This is a test message.
   --J.

B.3.  Example 3: Mailing list to forwarded mailbox with source

B.3.1.  Here's the message as it exits the Origin:


























Andersen, et al.         Expires March 10, 2018                [Page 37]


Internet-Draft                ARC-Protocol                September 2017


  Return-Path: <jqd@d1.example>
  Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
      (authenticated bits=0)
      by segv.d1.example with ESMTP id t0FN4a8O084569;
      Thu, 14 Jan 2015 15:00:01 -0800 (PST)
      (envelope-from jqd@d1.example)
  ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
      s=origin2015; d=d1.example; cv=none;
      b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61T
       X6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69EU
       8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
  ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
      d=d1.example; s=20130426; t=1421363082;
      bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
      h=MIME-Version:CC:Content-Type:Content-Transfer-Encoding;
      b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrv
       Qwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3
       TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
  Message-ID: <54B84785.1060301@d1.example>
  Date: Thu, 14 Jan 2015 15:00:01 -0800
  From: John Q Doe <jqd@d1.example>
  To: arc@example.org
  Subject: Example 1

  Hey gang,
  This is a test message.
  --J.

B.3.2.  Message is then received at example.org

B.3.2.1.  Example 3, Step A: Message forwarded to list members with
          source

   Processing at example.org:

   o  example.org performs authentication checks

   o  example.org applies standard DKIM signature

   o  Checks for ARC-Seal: header; finds one (i=1)

   o  Validates the signature in the ARC-Seal (i=1): header, which
      covers the d1.example ARC-Message-Signature: header

   o  example.org adds ARC-Authentication-Results header

   o  example.org adds usual Received: header




Andersen, et al.         Expires March 10, 2018                [Page 38]


Internet-Draft                ARC-Protocol                September 2017


   o  example.org adds a DKIM-Signature

   o  example.org adds a ARC-Seal header, contents of which are

      *  sequence number ("i=2")

      *  hash algorithm (SHA256 as example)

      *  timestamp ("t=")

      *  chain validity ("cv=")

      *  selector for key ("s=seal2015")

      *  domain for key ("d=example.org")

      *  signature ("b=")

   Here's the message as it exits Step A:
































Andersen, et al.         Expires March 10, 2018                [Page 39]


Internet-Draft                ARC-Protocol                September 2017


   Return-Path: <jqd@d1.example>
   ARC-Seal: i=2; a=rsa-sha256; t=1421363107;
       s=seal2015; d=example.org; cv=pass;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz6
        1TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L
        69EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed;
       d=example.org; s=clochette; t=1421363105;
       bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
       h=List-Id:List-Unsubscribe:List-Archive:List-Post:
        List-Help:List-Subscribe:From:Reply-To:DKIM-Signature;
       b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF
        1F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3
        A+m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
   Received: from segv.d1.example (segv.d1.example [72.52.75.15])
       by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
       for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Authentication-Results: i=2; lists.example.org;
       spf=pass smtp.mfrom=jqd@d1.example;
       dkim=pass (1024-bit key) header.i=@d1.example;
       dmarc=pass
   Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
       (authenticated bits=0)
       by segv.d1.example with ESMTP id t0FN4a8O084569;
       Thu, 14 Jan 2015 15:00:01 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
       s=origin2015; d=d1.example; cv=none;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
       d=d1.example; s=20130426; t=1421363082;
       bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
       h=MIME-Version:CC:Content-Type:Content-Transfer-Encoding;
       b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
        vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
        d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
   Message-ID: <54B84785.1060301@d1.example>
   Date: Thu, 14 Jan 2015 15:00:01 -0800
   From: John Q Doe <jqd@d1.example>
   To: arc@example.org
   Subject: [Lists] Example 1

   Hey gang,
   This is a test message.
   --J.



Andersen, et al.         Expires March 10, 2018                [Page 40]


Internet-Draft                ARC-Protocol                September 2017


B.3.2.2.  Example 3, Step B: Message from list forwarded with source

   The message is delivered to a mailbox at gmail.com
   Processing at gmail.com:

   o  gmail.com performs usual authentication checks

   o  gmail.com adds Authentication-Results: and Received: header

   o  Determines that message fails DMARC

   o  Checks for ARC-Seal: header; finds two

   o  Validates the signature in the ARC-Seal (i=2): header, which
      covers the ARC-Authentication-Results: header

   o  Validates the signature in the ARC-Seal (i=1): header, which
      covers the d1.example ARC-Message-Signature: header

   o  Uses the ARC-Authentication-Results: values, but:

   o  Instead of delivering message, prepares to forward message per
      user settings

   o  Applies usual DKIM signature

   o  gmail.com adds it's own ARC-Seal: header, contents of which are

      *  version

      *  sequence number ("i=2")

      *  hash algorithm (SHA256 as example)

      *  timestamp ("t=")

      *  selector for key ("s=notary01")

      *  domain for key ("d=gmail.com")

      *  Note: algorithm requires only ARC-Seals with lower sequence #
         be included, in ascending order

      *  signature of the chain

   Here's what the message looks like at this point:

   Return-Path: <jqd@d1.example>



Andersen, et al.         Expires March 10, 2018                [Page 41]


Internet-Draft                ARC-Protocol                September 2017


   ARC-Seal: i=3; a=rsa-sha256; t=1421363253;
       s=notary01; d=gmail.com; cv=pass;
       b=sjHDMriRZ0Mui5eVEOGscRHWbQHcy97lvrduHQ8h+f2CfIrxUiKOE44x3LQwD
        WRYbDjf5fcM9MdcIahC+cP59BQ9Y9DHwMDzwRTnM7NVb4kY+tSaVnLoIOaP9lF
        /suttxO+RRNr0fCFw==
   ARC-Message-Signature: i=3; a=rsa-sha256; c=relaxed/relaxed;
       d=gmail.com; s=20120806;
       h=mime-version:content-type:x-original-sender
        :x-original-authentication-results:precedence:mailing-list
        :list-id:list-post:list-help:list-archive:sender
        :list-unsubscribe:reply-to;
       bh=2+gZwZhUK2V7JbpoO2MTrU19WvhcA4JnjiohFm9ZZ/g=;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz6
        1TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L
        69EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0Ab8Oi1ebYV/hIBm
        fhSLF1E80hMPcMijONfTQB6g5Hoh/kE6N2fgp6aSngL/WA3+g3Id8ElhXHvIGcJ
        RFeMKdJqiW5cxdqPTRW+BnR5ee6Tzg06kr265NTDIAU8p8fQNuLfZj49MMA+QwD
        BJtXwbQoZyRtb6X6q0mYaszUB8kw==
   Received: by mail-yk0-f179.google.com with SMTP id 19so2728865ykq.10
       for <mailbox@gmail.com>; Thu, 14 Jan 2015 15:02:45 -0800 (PST)
   Authentication-Results: i=3; gmail.com; spf=fail
       smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
       header.i=@example.org; dmarc=fail; arc=pass
   ARC-Seal: i=2; a=rsa-sha256; t=1421363107;
       s=seal2015; d=example.org; cv=pass;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed;
       d=example.org; s=clochette; t=1421363105;
       bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
       h=List-Id:List-Unsubscribe:List-Archive:List-Post:
        List-Help:List-Subscribe:Reply-To:DKIM-Signature;
       b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF1
        F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3A+
        m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
   Received: from segv.d1.example (segv.d1.example [72.52.75.15])
       by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123
       for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
       (envelope-from jqd@d1.example)
   ARC-Authentication-Results: i=2; lists.example.org;
       spf=pass smtp.mfrom=jqd@d1.example;
       dkim=pass (1024-bit key) header.i=@d1.example;
       dmarc=pass
   Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
       (authenticated bits=0)
       by segv.d1.example with ESMTP id t0FN4a8O084569;
       Thu, 14 Jan 2015 15:00:01 -0800 (PST)



Andersen, et al.         Expires March 10, 2018                [Page 42]


Internet-Draft                ARC-Protocol                September 2017


       (envelope-from jqd@d1.example)
   ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
       s=origin2015; d=d1.example; cv=none;
       b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
        TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
        EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
   ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
       d=d1.example; s=20130426; t=1421363082;
       bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
       h=MIME-Version:CC:Content-Type:Content-Transfer-Encoding;
       b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYij
        rvQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD
        4Gd3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
   Message-ID: <54B84785.1060301@d1.example>
   Date: Thu, 14 Jan 2015 15:00:01 -0800
   From: John Q Doe <jqd@d1.example>
   To: arc@example.org
   Subject: [Lists] Example 1

   Hey gang,
   This is a test message.
   --J.

B.3.3.  Example 3: Message received by Recipient

   Let's say that the Recipient is example.com
   Processing at example.com:

   o  example.com performs usual authentication checks

   o  example.com adds Authentication-Results: header, Received header

   o  Determines that message fails DMARC

   o  Checks for ARC-Seal: header; finds three

   o  Validates the signature in the highest numbered ("i=2") ARC-Seal:
      header, which covers all previous ARC-Seal: and ARC-
      Authentication-Results: headers

   o  Validates the other ARC-Seal header ("i=2"), which covers the ARC-
      Authentication-Results: header

   o  Validates the other ARC-Seal header ("i=1"), which covers the
      d1.example ARC-Message-Signature: header

   o  example.com uses the ARC-Authentication-Results: values




Andersen, et al.         Expires March 10, 2018                [Page 43]


Internet-Draft                ARC-Protocol                September 2017


   Here's what the message looks like at this point:

Return-Path: <jqd@d1.example>
Received: from mail-ob0-f188.google.com (mail-ob0-f188.google.com
    [208.69.40.157]) by clothilde.example.com with ESMTP id
    d200mr22663000ykb.93.1421363268
    for <fmartin@example.com>; Thu, 14 Jan 2015 15:03:15 -0800 (PST)
Authentication-Results: clothilde.example.com; spf=fail
    smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
    header.i=@gmail.com; dmarc=fail; arc=pass
ARC-Seal: i=3; a=rsa-sha256; t=1421363253;
    s=notary01; d=gmail.com; cv=pass;
    b=sjHDMriRZ0Mui5eVEOGscRHWbQHcy97lvrduHQ8h+f2CfIrxUiKOE44x3LQwDW
     RYbDjf5fcM9MdcIahC+cP59BQ9Y9DHwMDzwRTnM7NVb4kY+tSaVnLoIOaP9lF/s
     uttxO+RRNr0fCFw==
ARC-Message-Signature: i=3; a=rsa-sha256; c=relaxed/relaxed;
    d=gmail.com; s=20120806;
    h=mime-version:content-type:x-original-sender
     :x-original-authentication-results:precedence
     :mailing-list:list-id:list-post:list-help:list-archive:sender
     :list-unsubscribe:reply-to;
    bh=2+gZwZhUK2V7JbpoO2MTrU19WvhcA4JnjiohFm9ZZ/g=;
    b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz6
     1TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L
     69EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0Ab8Oi1ebYV/hIBm
     fhSLF1E80hMPcMijONfTQB6g5Hoh/kE6N2fgp6aSngL/WA3+g3Id8ElhXHvIGcJ
     RFeMKdJqiW5cxdqPTRW+BnR5ee6Tzg06kr265NTDIAU8p8fQNuLfZj49MMA+QwD
     BJtXwbQoZyRtb6X6q0mYaszUB8kw==
Received: by mail-yk0-f179.google.com with SMTP id 19so2728865ykq.10
    for <mailbox@gmail.com>; Thu, 14 Jan 2015 15:02:45 -0800 (PST)
Authentication-Results: i=3; gmail.com; spf=fail
    smtp.from=jqd@d1.example; dkim=pass (1024-bit key)
    header.i=@example.org; dmarc=fail; arc=pass
ARC-Seal: i=2; a=rsa-sha256; t=1421363107;
    s=seal2015; d=example.org; cv=pass;
    b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz6
     1TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L
     69EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed;
    d=example.org; s=clochette; t=1421363105;
    bh=FjQYm3HhXStuzauzV4Uc02o55EzATNfL4uBvEoy7k3s=;
    h=List-Id:List-Unsubscribe:List-Archive:List-Post:
     List-Help:List-Subscribe:Reply-To:DKIM-Signature;
    b=Wb4EiVANwAX8obWwrRWpmlhxmdIvj0dv0psIkiaGOOug32iTAcc74/iWvlPXpF1
     F5vYVF0mw5cmKOa824tKkUOOE3yinTAekqnly7GJuFCDeSA1fQHhStVV7BzAr3A+
     m4bwa6RIDgr3rOPJil678dZTHfztFWyjwIUxB5Ajxj/M=
Received: from segv.d1.example (segv.d1.example [72.52.75.15])
    by lists.example.org (8.14.5/8.14.5) with ESMTP id t0EKaNU9010123



Andersen, et al.         Expires March 10, 2018                [Page 44]


Internet-Draft                ARC-Protocol                September 2017


    for <arc@example.org>; Thu, 14 Jan 2015 15:01:30 -0800 (PST)
    (envelope-from jqd@d1.example)
ARC-Authentication-Results: i=2; lists.example.org;
    spf=pass smtp.mfrom=jqd@d1.example;
    dkim=pass (1024-bit key) header.i=@d1.example;
    dmarc=pass
Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
    (authenticated bits=0)
    by segv.d1.example with ESMTP id t0FN4a8O084569;
    Thu, 14 Jan 2015 15:00:01 -0800 (PST)
    (envelope-from jqd@d1.example)
ARC-Seal: i=1; a=rsa-sha256; t=1421363107;
    s=origin2015; d=d1.example; cv=none;
    b=pCw3Qxgfs9E1qnyNZ+cTTF3KHgAjWwZz++Rju0BceSiuwIg0Pkk+3RZH/kaiz61
     TX6RVT6E4gs49Sstp41K7muj1OR5R6Q6llahLlQJZ/YfDZ3NImCU52gFWLUD7L69
     EU8TzypfkUhscqXjOJgDwjIceBNNOfh3Jy+V8hQZrVFCw0A=
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed;
    d=d1.example; s=20130426; t=1421363082;
    bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
    h=MIME-Version:To:CC:Subject:Content-Type:Content-Transfer-Encoding;
    b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijr
     vQwbv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4G
     d3TRJlgotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
Message-ID: <54B84785.1060301@d1.example>
Date: Thu, 14 Jan 2015 15:00:01 -0800
From: John Q Doe <jqd@d1.example>
To: arc@example.org
Subject: [Lists] Example 1

Hey gang,
This is a test message.
--J.

Appendix C.  Acknowledgements

   This draft is the work of OAR-Dev Group.

   The authors thank all of the OAR-Dev group for the ongoing help and
   though-provoking discussions from all the participants, especially:
   Alex Brotman, Brandon Long, Dave Crocker, Elizabeth Zwicky, Franck
   Martin, Greg Colburn, J.  Trent Adams, John Rae-Grant, Mike Hammer,
   Mike Jones, Steve Jones, Terry Zink, Tim Draegen.

   Grateful appreciation is extended to the people who provided feedback
   through the discuss mailing list.






Andersen, et al.         Expires March 10, 2018                [Page 45]


Internet-Draft                ARC-Protocol                September 2017


Appendix D.  Comments and Feedback

   Please address all comments, discussions, and questions to
   dmarc@ietf.org [4].  Earlier discussions can be found at arc-
   discuss@dmarc.org [5].

Authors' Addresses

   Kurt Andersen
   LinkedIn
   1000 West Maude Ave
   Sunnyvale, California  94085
   USA

   Email: kurta@linkedin.com


   Brandon Long (editor)
   Google

   Email: blong@google.com


   Steven Jones (editor)
   TDP

   Email: smj@crash.com


   Murray Kucherawy (editor)
   TDP

   Email: superuser@gmail.com


















Andersen, et al.         Expires March 10, 2018                [Page 46]


Html markup produced by rfcmarkup 1.124, available from https://tools.ietf.org/tools/rfcmarkup/