[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12

Internet Engineering Task Force                              T. Pusateri
Internet-Draft                                       Seeking affiliation
Intended status: Standards Track                             S. Cheshire
Expires: December 19, 2017                                    Apple Inc.
                                                           June 17, 2017


                         DNS Push Notifications
                        draft-ietf-dnssd-push-11

Abstract

   The Domain Name System (DNS) was designed to return matching records
   efficiently for queries for data that is relatively static.  When
   those records change frequently, DNS is still efficient at returning
   the updated results when polled.  But there exists no mechanism
   for a client to be asynchronously notified when these changes occur.
   This document defines a mechanism for a client to be notified
   of such changes to DNS records, called DNS Push Notifications.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 19, 2017.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must



Pusateri & Cheshire     Expires December 19, 2017               [Page 1]


Internet-Draft           DNS Push Notifications                June 2017


   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Requirements Language . . . . . . . . . . . . . . . . . .   3
   2.  Motivation  . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Overview  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   4.  Transport . . . . . . . . . . . . . . . . . . . . . . . . . .   6
   5.  State Considerations  . . . . . . . . . . . . . . . . . . . .   7
   6.  Protocol Operation  . . . . . . . . . . . . . . . . . . . . .   8
     6.1.  Discovery . . . . . . . . . . . . . . . . . . . . . . . .   9
     6.2.  DNS Push Notification SUBSCRIBE . . . . . . . . . . . . .  11
       6.2.1.  SUBSCRIBE Request . . . . . . . . . . . . . . . . . .  12
       6.2.2.  SUBSCRIBE Response  . . . . . . . . . . . . . . . . .  15
     6.3.  DNS Push Notification Updates . . . . . . . . . . . . . .  18
       6.3.1.  PUSH Message  . . . . . . . . . . . . . . . . . . . .  19
       6.3.2.  PUSH Response . . . . . . . . . . . . . . . . . . . .  22
     6.4.  DNS Push Notification UNSUBSCRIBE . . . . . . . . . . . .  23
       6.4.1.  UNSUBSCRIBE Request . . . . . . . . . . . . . . . . .  24
       6.4.2.  UNSUBSCRIBE Response  . . . . . . . . . . . . . . . .  26
     6.5.  DNS Push Notification RECONFIRM . . . . . . . . . . . . .  28
       6.5.1.  RECONFIRM Request . . . . . . . . . . . . . . . . . .  29
       6.5.2.  RECONFIRM Response  . . . . . . . . . . . . . . . . .  31
     6.6.  Client-Initiated Termination  . . . . . . . . . . . . . .  33
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  34
     7.1.  Security Services . . . . . . . . . . . . . . . . . . . .  34
     7.2.  TLS Name Authentication . . . . . . . . . . . . . . . . .  34
     7.3.  TLS Compression . . . . . . . . . . . . . . . . . . . . .  35
     7.4.  TLS Session Resumption  . . . . . . . . . . . . . . . . .  35
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  35
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  36
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  36
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  36
     10.2.  Informative References . . . . . . . . . . . . . . . . .  38
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  40













Pusateri & Cheshire     Expires December 19, 2017               [Page 2]


Internet-Draft           DNS Push Notifications                June 2017


1.  Introduction

   DNS records may be updated using DNS Update [RFC2136].  Other
   mechanisms such as a Discovery Proxy [DisProx] can also generate
   changes to a DNS zone.  This document specifies a protocol for DNS
   clients to subscribe to receive asynchronous notifications of changes
   to RRSets of interest.  It is immediately relevant in the case of DNS
   Service Discovery [RFC6763] but is not limited to that use case, and
   provides a general DNS mechanism for DNS record change notifications.
   Familiarity with the DNS protocol and DNS packet formats is assumed
   [RFC1034] [RFC1035] [RFC6895].

1.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   "Key words for use in RFCs to Indicate Requirement Levels" [RFC2119].

2.  Motivation

   As the domain name system continues to adapt to new uses and changes
   in deployment, polling has the potential to burden DNS servers at
   many levels throughout the network.  Other network protocols have
   successfully deployed a publish/subscribe model to state changes
   following the Observer design pattern [obs].  XMPP Publish-Subscribe
   [XEP0060] and Atom [RFC4287] are examples.  While DNS servers are
   generally highly tuned and capable of a high rate of query/response
   traffic, adding a publish/subscribe model for tracking changes to DNS
   records can result in more timely notification of changes with
   reduced CPU usage and lower network traffic.

   Multicast DNS [RFC6762] implementations always listen on a well known
   link-local IP multicast group, and new services and updates are sent
   for all group members to receive.  Therefore, Multicast DNS already
   has asynchronous change notification capability.  However, when DNS
   Service Discovery [RFC6763] is used across a wide area network using
   Unicast DNS (possibly facilitated via a Discovery Proxy [DisProx]) it
   would be beneficial to have an equivalent capability for Unicast DNS,
   to allow clients to learn about DNS record changes in a timely manner
   without polling.

   The DNS Long-Lived Queries (LLQ) [I-D.sekar-dns-llq] mechanism is an
   existing deployed solution to provide asynchronous change
   notifications, used by Apple's Back to My Mac Service [RFC6281].
   Back to My Mac was designed in an era when the data centre operations
   staff asserted that it was impossible for a server to handle large
   numbers of mostly-idle TCP connections, so LLQ had to defined as a



Pusateri & Cheshire     Expires December 19, 2017               [Page 3]


Internet-Draft           DNS Push Notifications                June 2017


   UDP-based protocol, effectively replicating much of TCP's connection
   state management logic in user space, and creating its own poor
   imitations of existing TCP features like the three-way handshake,
   flow control, and reliability.

   This document builds on experience gained with the LLQ protocol, with
   an improved design.  Instead of using UDP, this specification uses
   TCP, and therefore doesn't need to reinvent existing TCP
   functionality.  Using TCP also gives long-lived low-traffic
   connections better longevity through NAT gateways without resorting
   to excessive keepalive traffic.  Instead of inventing a new
   vocabulary of messages to communicate DNS zone changes as LLQ did,
   this specification adopts the syntax and semantics of DNS Update
   messages [RFC2136].

3.  Overview

   The existing DNS Update protocol [RFC2136] provides a mechanism for
   clients to add or delete individual resource records (RRs) or entire
   resource record sets (RRSets) on the zone's server.

   This specification adopts a simplified subset of these existing
   syntax and semantics, and uses them for DNS Push Notification
   messages going in the opposite direction, from server to client, to
   communicate changes to a zone.  The client subscribes for Push
   Notifications by connecting to the server and sending DNS message(s)
   indicating the RRSet(s) of interest.  When the client loses interest
   in updates to these records, it unsubscribes.

   The DNS Push Notification server for a zone is any server capable
   of generating the correct change notifications for a name.
   It may be a master, slave, or stealth name server [RFC7719].
   Consequently, the "_dns-push-tls._tcp.<zone>" SRV record for a
   zone MAY reference the same target host and port as that zone's
   "_dns-update-tls._tcp.<zone>" SRV record.  When the same target host
   and port is offered for both DNS Updates and DNS Push Notifications,
   a client MAY use a single TCP connection to that server for both DNS
   Updates and DNS Push Notification Queries.

   Supporting DNS Updates and DNS Push Notifications on the same server
   is OPTIONAL.  A DNS Push Notification server does NOT also have to
   support DNS Update.

   DNS Updates and DNS Push Notifications may be handled on different
   ports on the same target host, in which case they are not considered
   to be the "same server" for the purposes of this specification, and
   communications with these two ports are handled independently.




Pusateri & Cheshire     Expires December 19, 2017               [Page 4]


Internet-Draft           DNS Push Notifications                June 2017


   Standard DNS Queries MAY be sent over a DNS Push Notification
   connection, provided that these are queries for names falling within
   the server's zone (the <zone> in the "_dns-push-tls._tcp.<zone>" SRV
   record).  The RD (Recursion Desired) bit MUST be zero.  If a query is
   received with the RD bit set, matching records for names falling
   within the server's zones should be returned with the RA (Recursion
   Available) bit clear.  If the query is for a name not in the server's
   zone, an error with RCODE NOTAUTH (Not Authoritative) should be
   returned.

   DNS Push Notification clients are NOT required to implement DNS
   Update Prerequisite processing.  Prerequisites are used to perform
   tentative atomic test-and-set type operations when a client updates
   records on a server, and that concept has no applicability when it
   comes to an authoritative server informing a client of changes to DNS
   records.

   This DNS Push Notification specification includes support for DNS
   classes, for completeness.  However, in practice, it is anticipated
   that for the foreseeable future the only DNS class in use will be DNS
   class "IN", as is the reality today with existing DNS servers and
   clients.  A DNS Push Notification server MAY choose to implement only
   DNS class "IN".  If messages are received for a class other than
   "IN", and that class is not supported, an error with RCODE NOTIMPL
   (Not Implemented) should be returned.

   DNS Push Notifications impose less load on the responding server than
   rapid polling would, but Push Notifications do still have a cost, so
   DNS Push Notification clients must not recklessly create an excessive
   number of Push Notification subscriptions.  A subscription should
   only be active when there is a valid reason to need live data (for
   example, an on-screen display is currently showing the results to the
   user) and the subscription SHOULD be cancelled as soon as the need
   for that data ends (for example, when the user dismisses that
   display).  Implementations MAY want to implement idle timeouts, so
   that if the user ceases interacting with the device, the display
   showing the result of the DNS Push Notification subscription is
   automatically dismissed after a certain period of inactivity.  For
   example, if a user presses the "Print" button on their smartphone,
   and then leaves the phone showing the printer discovery screen until
   the phone goes to sleep, then the printer discovery screen should be
   automatically dismissed as the device goes to sleep.  If the user
   does still intend to print, this will require them to press the
   "Print" button again when they wake their phone up.

   A DNS Push Notification client must not routinely keep a DNS Push
   Notification subscription active 24 hours a day, 7 days a week, just
   to keep a list in memory up to date so that if the user does choose



Pusateri & Cheshire     Expires December 19, 2017               [Page 5]


Internet-Draft           DNS Push Notifications                June 2017


   to bring up an on-screen display of that data, it can be displayed
   really fast.  DNS Push Notifications are designed to be fast enough
   that there is no need to pre-load a "warm" list in memory just in
   case it might be needed later.

   Generally, as described in the DNS Session Signaling specification
   [SessSig], a client must not keep a connection to a server open
   indefinitely if it has no subscriptions (or other operations) active
   on that connection.  A client MAY close a connection as soon as it
   becomes idle, and then if needed in the future, open a new connection
   when required.  Alternatively, a client MAY speculatively keep an
   idle connection open for some time, subject to the constraint that it
   MUST NOT keep a connection open that has been idle for more than the
   session's idle timeout (15 seconds by default).

4.  Transport

   Implementations of DNS Update [RFC2136] MAY use either User Datagram
   Protocol (UDP) [RFC0768] or Transmission Control Protocol (TCP)
   [RFC0793] as the transport protocol, in keeping with the historical
   precedent that DNS queries must first be sent over UDP [RFC1123].
   This requirement to use UDP has subsequently been relaxed [RFC7766].

   In keeping with the more recent precedent, DNS Push Notification is
   defined only for TCP.  DNS Push Notification clients MUST use TLS
   over TCP, see RFC 7858 [RFC7858].

   Connection setup over TCP ensures return reachability and alleviates
   concerns of state overload at the server through anonymous
   subscriptions.  All subscribers are guaranteed to be reachable by the
   server by virtue of the TCP three-way handshake.  Flooding attacks
   are possible with any protocol, and a benefit of TCP is that there
   are already established industry best practices to guard against SYN
   flooding and similar attacks [IPJ.9-4-TCPSYN] [RFC4953].

   Use of TCP also allows DNS Push Notifications to take advantage of
   current and future developments in TCP, such as Multipath TCP (MPTCP)
   [RFC6824], TCP Fast Open (TFO) [RFC7413], Tail Loss Probe (TLP)
   [I-D.dukkipati-tcpm-tcp-loss-probe], and so on.

   Transport Layer Security (TLS) [RFC5246] is well understood and
   deployed across many protocols running over TCP.  It is designed to
   prevent eavesdropping, tampering, or message forgery.  TLS is
   REQUIRED for every connection between a client subscriber and server
   in this protocol specification.  Additional security measures such as
   client authentication during TLS negotiation MAY also be employed to
   increase the trust relationship between client and server.




Pusateri & Cheshire     Expires December 19, 2017               [Page 6]


Internet-Draft           DNS Push Notifications                June 2017


5.  State Considerations

   Each DNS Push Notification server is capable of handling some finite
   number of Push Notification subscriptions.  This number will vary
   from server to server and is based on physical machine
   characteristics, network bandwidth, and operating system resource
   allocation.  After a client establishes a connection to a DNS server,
   each subscription is individually accepted or rejected.  Servers may
   employ various techniques to limit subscriptions to a manageable
   level.  Correspondingly, the client is free to establish simultaneous
   connections to alternate DNS servers that support DNS Push
   Notifications for the zone and distribute subscriptions at its
   discretion.  In this way, both clients and servers can react to
   resource constraints.  Token bucket rate limiting schemes are also
   effective in providing fairness by a server across numerous client
   requests.



































Pusateri & Cheshire     Expires December 19, 2017               [Page 7]


Internet-Draft           DNS Push Notifications                June 2017


6.  Protocol Operation

   The DNS Push Notification protocol is a session-oriented protocol,
   and makes use of DNS Session Signaling [SessSig].

   For details of the DNS Session Signaling message format refer to the
   DNS Session Signaling specification [SessSig].  Those details are not
   repeated here.

   DNS Push Notification clients and servers MUST support DNS Session
   Signaling, but the server SHOULD NOT issue any DNS Session Signaling
   operations until after the client has first initiated a DNS Session
   Signaling operation of its own.  A single server can support DNS
   Queries, DNS Updates, and DNS Push Notifications (using DNS Session
   Signaling) on the same TCP port, and until the client has sent at
   least one DNS Session Signaling operation the server does not know
   what kind of client has connected to it.  Once the client has
   indicated willingness to use DNS Session Signaling operations by
   sending one of its own, either side of the connection may then
   initiate further Session Signaling operations at any time.

   A DNS Push Notification exchange begins with the client discovering
   the appropriate server, using the procedure described in Section 6.1,
   and then making a TLS/TCP connection to it.

   A typical DNS Push Notification client will immediately issue a DNS
   Session Signaling Keepalive operation to request a session timeout or
   keepalive interval longer than the the 15-second defaults, but this
   is not required.  A DNS Push Notification client MAY issue other
   requests on the connection first, and only issue a DNS Session
   Signaling Keepalive operation later if it determines that to be
   necessary.

   Once the connection is made, the client may then add and remove Push
   Notification subscriptions.  In accordance with the current set of
   active subscriptions the server sends relevant asynchronous Push
   Notifications to the client.  Note that a client MUST be prepared to
   receive (and silently ignore) Push Notifications for subscriptions it
   has previously removed, since there is no way to prevent the
   situation where a Push Notification is in flight from server to
   client while the client's UNSUBSCRIBE message cancelling that
   subscription is simultaneously in flight from client to server.

   The exchange between client and server terminates when either end
   closes the TCP connection with a TCP FIN or RST.






Pusateri & Cheshire     Expires December 19, 2017               [Page 8]


Internet-Draft           DNS Push Notifications                June 2017


6.1.  Discovery

   The first step in DNS Push Notification subscription is to discover
   an appropriate DNS server that supports DNS Push Notifications for
   the desired zone.  The client MUST also determine which TCP port on
   the server is listening for connections, which need not be (and often
   is not) the typical TCP port 53 used for conventional DNS, or TCP
   port 853 used for DNS over TLS [RFC7858].

   1.  The client begins the discovery by sending a DNS query to its
       local resolver, with record type SOA [RFC1035] for the record to
       which it wishes to subscribe.  As an example, if it wishes to
       subscribe to PTR records with the name
       _printers._tcp.foo.example.com, it sends an SOA query for
       _printers._tcp.foo.example.com.  The goal is to determine the
       authoritative server for foo.example.com.

   2.  If the SOA record exists as exactly specified in the query, it is
       expected to be returned in the Answer section with a NOERROR
       response code.  If the exact SOA record does not exist, the
       client may get back a NOERROR/NODATA response or it may get back
       a NXDOMAIN/Name Error response.  This depends on the resolver
       implementation and whether the domain exists.  The client is
       looking for an SOA record to be returned in either the Answer
       section or the Authority section with a NOERROR response code.
       If the client receives an NXDOMAIN/Name Error response code, it
       should strip the leading label from the query name and if the
       resulting name has at least one label in it, the client should
       send a new SOA query, repeating this until a NOERROR response
       code is received or the query name is empty.  In the case of an
       empty name, the client may retry the operation at a later time,
       of the client's choosing, such after a change in network
       attachment.

   3.  In the example above, if an SOA record query is sent for
       _printers._tcp.foo.example.com and an NXDOMAIN/Name Error is
       returned with an SOA record in the Authority section for
       foo.example.com, the client should strip the leading label and
       query an SOA record for _tcp.foo.example.com.  If a NOERROR/
       NODATA response is received with an SOA record in the Authority
       section for foo.example.com, this is sufficent.  If an NXDOMAIN/
       Name Error response is received, the client should again strip
       the leading label and query an SOA record for foo.example.com.
       If the foo.example.com domain exists, this should result in a
       NOERROR response with the SOA record in the Answer section.  If
       the domain foo.example.com does not exist, the response will
       likely be an NXDOMAIN/Name Error with an SOA record for




Pusateri & Cheshire     Expires December 19, 2017               [Page 9]


Internet-Draft           DNS Push Notifications                June 2017


       example.com in the Authority section.  This means the subdomain
       foo.example.com has not been properly delegated by example.com.

   4.  If a NOERROR/NODATA response is received but contains no SOA in
       the Authority section, the client could try stripping the leading
       label and issuing another SOA query.  Additional information
       about negative responses can be found in Section 2 of [RFC2308].

   5.  Once the SOA is known (either by virtue of being seen in the
       Answer Section, or in the Authority Section), the client sends a
       DNS query with type SRV [RFC2782] for the record name
       "_dns-push-tls._tcp.<zone>", where <zone> is the owner name of
       the discovered SOA record.

   6.  For implementors of this specification, an authoritative answer
       for that SRV record, and only such an answer, will determine
       whether the zone supports DNS Push Notifications.

   7.  If the SRV record does exist, the SRV "target" contains the name
       of the server providing DNS Push Notifications for the zone.  The
       port number on which to contact the server is in the SRV record
       "port" field.  The address(es) of the target host MAY be included
       in the Additional Section, however, the address records SHOULD be
       authenticated before use as described below in Section 7.2 and
       [RFC7673].

   8.  More than one SRV record may be returned.  In this case, the
       "priority" and "weight" values in the returned SRV records are
       used to determine the order in which to contact the servers for
       subscription requests.  As described in the SRV specification
       [RFC2782], the server with the lowest "priority" is first
       contacted.  If more than one server has the same "priority", the
       "weight" indicates the weighted probability that the client
       should contact that server.  Higher weights have higher
       probabilities of being selected.  If a server is not reachable or
       is not willing to accept a subscription request, then a
       subsequent server is to be contacted.

   Each time a client makes a new DNS Push Notification subscription
   connection, it SHOULD repeat the discovery process in order to
   determine the preferred DNS server for subscriptions at that time.
   However, the client device MUST respect the DNS TTL values on records
   it receives, and store them in its local cache with this lifetime.
   This means that, as long as the DNS TTL values on the authoritative
   records were set to reasonable values, repeated application of this
   discovery process can be completed nearly instantaneously by the
   client, using only locally-stored cached data.




Pusateri & Cheshire     Expires December 19, 2017              [Page 10]


Internet-Draft           DNS Push Notifications                June 2017


6.2.  DNS Push Notification SUBSCRIBE

   After connecting, and requesting a longer idle timeout and/or
   keepalive interval if necessary, a DNS Push Notification client then
   indicates its desire to receive DNS Push Notifications for a given
   domain name by sending a SUBSCRIBE request over the established TLS
   connection to the server.  A SUBSCRIBE request is encoded in a DNS
   Session Signaling [SessSig] message.  This specification defines a
   DNS Session Signaling TLV for DNS Push Notification SUBSCRIBE
   Requests/Responses (tentatively Session Signaling Type Code 0x40).

   The entity that initiates a SUBSCRIBE request is by definition the
   client.  A server should not send a SUBSCRIBE request over an
   existing connection from a client.  If a server does send a SUBSCRIBE
   request over the connection initiated by a client, it is an error and
   the client should acknowledge the request with the error response
   RCODE NOTAUTH (Not Authoritative).


































Pusateri & Cheshire     Expires December 19, 2017              [Page 11]


Internet-Draft           DNS Push Notifications                June 2017


6.2.1.  SUBSCRIBE Request

   A SUBSCRIBE request message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], followed by the SUBSCRIBE TLV.  A
   SUBSCRIBE request message is illustrated below:

                                     1  1  1  1  1  1
       0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |                  MESSAGE ID                   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |QR|  Opcode   |         Z          |   RCODE   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             QDCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ANCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             NSCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ARCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |   SSOP-TYPE = SUBSCRIBE (tentatively 0x40)    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |  SSOP-LENGTH (number of octets in SSOP-DATA)  |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  \
     |                                               |   \
     \                     NAME                      \    |
     \                                               \    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+     > SSOP-DATA
     |                     TYPE                      |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     CLASS                     |   /
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  /

                                 Figure 1

   The MESSAGE ID field MUST be set to a unique value, that the client
   is not using for any other active operation on this connection.  For
   the purposes here, a MESSAGE ID is in use on this connection if the
   client has used it in a request for which it has not yet received a
   response, or if the client has used it for a subscription which it
   has not yet cancelled using UNSUBSCRIBE.  In the SUBSCRIBE response
   the server MUST echo back the MESSAGE ID value unchanged.

   The other header fields MUST be set as described in the DNS Session
   Signaling specification [SessSig].  The DNS Opcode is the Session
   Signaling Opcode (tentatively 6).  The four count fields MUST be




Pusateri & Cheshire     Expires December 19, 2017              [Page 12]


Internet-Draft           DNS Push Notifications                June 2017


   empty, and the corresponding four sections MUST be empty (i.e.,
   absent).

   The SSOP-TYPE is SUBSCRIBE (tentatively 0x40).  The SSOP-LENGTH is
   the length of the SSOP-DATA that follows, which specifies the name,
   type, and class of the record(s) being sought.

   The SSOP-DATA for a SUBSCRIBE request MUST contain exactly one
   question.  The SSOP-DATA for a SUBSCRIBE request has no QDCOUNT field
   to specify more than one question.  Since SUBSCRIBE requests are sent
   over TCP, multiple SUBSCRIBE request messages can be concatenated in
   a single TCP stream and packed efficiently into TCP segments.

   If accepted, the subscription will stay in effect until the client
   cancels the subscription using UNSUBSCRIBE or until the connection
   between the client and the server is closed.

   SUBSCRIBE requests on a given connection MUST be unique.  A client
   MUST NOT send a SUBSCRIBE message that duplicates the NAME, TYPE and
   CLASS of an existing active subscription on that TLS/TCP connection.
   For the purpose of this matching, the established DNS case-
   insensitivity for US-ASCII letters applies (e.g., "foo.com" and
   "Foo.com" are the same).  If a server receives such a duplicate
   SUBSCRIBE message this is an error and the server MUST immediately
   terminate the connection with a TCP RST (or equivalent for other
   protocols).

   DNS wildcarding is not supported.  That is, a wildcard ("*") in a
   SUBSCRIBE message matches only a literal wildcard character ("*") in
   the zone, and nothing else.

   Aliasing is not supported.  That is, a CNAME in a SUBSCRIBE message
   matches only a literal CNAME record in the zone, and nothing else.

   A client may SUBSCRIBE to records that are unknown to the server at
   the time of the request (providing that the name falls within one of
   the zone(s) the server is responsible for) and this is not an error.
   The server MUST accept these requests and send Push Notifications if
   and when matching records are found in the future.

   If neither TYPE nor CLASS are ANY (255) then this is a specific
   subscription to changes for the given NAME, TYPE and CLASS.  If one
   or both of TYPE or CLASS are ANY (255) then this subscription matches
   any type and/or any class, as appropriate.







Pusateri & Cheshire     Expires December 19, 2017              [Page 13]


Internet-Draft           DNS Push Notifications                June 2017


   NOTE: A little-known quirk of DNS is that in DNS QUERY requests,
   QTYPE and QCLASS 255 mean "ANY" not "ALL".  They indicate that the
   server should respond with ANY matching records of its choosing, not
   necessarily ALL matching records.  This can lead to some surprising
   and unexpected results, where a query returns some valid answers but
   not all of them, and makes QTYPE=ANY queries less useful than people
   sometimes imagine.

   When used in conjunction with SUBSCRIBE, TYPE and CLASS 255 should be
   interpreted to mean "ALL", not "ANY".  After accepting a subscription
   where one or both of TYPE or CLASS are 255, the server MUST send Push
   Notification Updates for ALL record changes that match the
   subscription, not just some of them.






































Pusateri & Cheshire     Expires December 19, 2017              [Page 14]


Internet-Draft           DNS Push Notifications                June 2017


6.2.2.  SUBSCRIBE Response

   Each SUBSCRIBE request generates exactly one SUBSCRIBE response from
   the server.

   A SUBSCRIBE response message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], possibly followed by one or more
   optional Modifier TLVs, such as a Retry Delay Modifier TLV.

   The MESSAGE ID field MUST echo the value given in the ID field of the
   SUBSCRIBE request.  This is how the client knows which request is
   being responded to.

   A SUBSCRIBE response message MUST NOT contain a Session Signaling
   Operation TLV.  The Session Signaling Operation TLV is NOT copied
   from the SUBSCRIBE request.

   In the SUBSCRIBE response the RCODE indicates whether or not the
   subscription was accepted.  Supported RCODEs are as follows:

   +------------+-------+----------------------------------------------+
   | Mnemonic   | Value | Description                                  |
   +------------+-------+----------------------------------------------+
   | NOERROR    |   0   | SUBSCRIBE successful.                        |
   | FORMERR    |   1   | Server failed to process request due to a    |
   |            |       | malformed request.                           |
   | SERVFAIL   |   2   | Server failed to process request due to a    |
   |            |       | problem with the server.                     |
   | NXDOMAIN   |   3   | NOT APPLICABLE. DNS Push Notification        |
   |            |       | servers MUST NOT return NXDOMAIN errors in   |
   |            |       | response to SUBSCRIBE requests.              |
   | NOTIMP     |   4   | Server does not recognize DNS Session        |
   |            |       | Signaling Opcode.                            |
   | REFUSED    |   5   | Server refuses to process request for policy |
   |            |       | or security reasons.                         |
   | NOTAUTH    |   9   | Server is not authoritative for the          |
   |            |       | requested name.                              |
   | SSOPNOTIMP |   11  | SUBSCRIBE operation not supported.           |
   +------------+-------+----------------------------------------------+

                         SUBSCRIBE Response codes

   This document specifies only these RCODE values for SUBSCRIBE
   Responses.  Servers sending SUBSCRIBE Responses SHOULD use one of
   these values.  However, future circumstances may create situations
   where other RCODE values are appropriate in SUBSCRIBE Responses, so
   clients MUST be prepared to accept SUBSCRIBE Responses with any RCODE
   value.



Pusateri & Cheshire     Expires December 19, 2017              [Page 15]


Internet-Draft           DNS Push Notifications                June 2017


   If the server sends a nonzero RCODE in the SUBSCRIBE response, either
   the client is (at least partially) misconfigured, the server
   resources are exhausted, or there is some other unknown failure on
   the server.  In any case, the client shouldn't retry the subscription
   right away.  Either end can terminate the connection, but the client
   may want to try this subscription again or it may have other
   successful subscriptions that it doesn't want to abandon.  If the
   server sends a nonzero RCODE then it SHOULD append a Retry Delay
   Modifier TLV [SessSig] to the response specifying a delay before the
   client attempts this operation again.  Recommended values for the
   delay for different RCODE values are given below:

      For RCODE = 1 (FORMERR) the delay may be any value selected by the
      implementer.  A value of five minutes is RECOMMENDED, to reduce
      the risk of high load from defective clients.

      For RCODE = 2 (SERVFAIL) the delay should be chosen according to
      the level of server overload and the anticipated duration of that
      overload.  By default, a value of one minute is RECOMMENDED.  If a
      more serious server failure occurs, the delay may be longer in
      accordance with the specific problem encountered.

      For RCODE = 4 (NOTIMP), which occurs on a server that doesn't
      implement DNS Session Signaling [SessSig], it is unlikely that the
      server will begin supporting DNS Session Signaling in the next few
      minutes, so the retry delay SHOULD be one hour.

      For RCODE = 5 (REFUSED), which occurs on a server that implements
      DNS Push Notifications, but is currently configured to disallow
      DNS Push Notifications, the retry delay may be any value selected
      by the implementer and/or configured by the operator.
      This is a misconfiguration, since this server is listed in a
      "_dns-push-tls._tcp.<zone>" SRV record, but the server itself is
      not currently configured to support DNS Push Notifications.  Since
      it is possible that the misconfiguration may be repaired at any
      time, the retry delay should not be set too high.  By default, a
      value of 5 minutes is RECOMMENDED.

      For RCODE = 9 (NOTAUTH), which occurs on a server that implements
      DNS Push Notifications, but is not configured to be authoritative
      for the requested name, the retry delay may be any value selected
      by the implementer and/or configured by the operator.
      This is a misconfiguration, since this server is listed in a
      "_dns-push-tls._tcp.<zone>" SRV record, but the server itself is
      not currently configured to support DNS Push Notifications for
      that zone.  Since it is possible that the misconfiguration may be
      repaired at any time, the retry delay should not be set too high.
      By default, a value of 5 minutes is RECOMMENDED.



Pusateri & Cheshire     Expires December 19, 2017              [Page 16]


Internet-Draft           DNS Push Notifications                June 2017


      For RCODE = 11 (DNS Push SUBSCRIBE operation not supported), which
      occurs on a server that doesn't implement DNS Push Notifications,
      it is unlikely that the server will begin supporting DNS Push
      Notifications in the next few minutes, so the retry delay SHOULD
      be one hour.

      For other RCODE values, the retry delay should be set by the
      server as appropriate for that error condition.  By default, a
      value of 5 minutes is RECOMMENDED.

   For RCODE = 9 (NOTAUTH), the time delay applies to requests for other
   names falling within the same zone.  Requests for names falling
   within other zones are not subject to the delay.  For all other
   RCODEs the time delay applies to all subsequent requests to this
   server.

   After sending an error response the server MAY allow the connection
   to remain open, or MAY send a DNS Push Notification Retry Delay
   Operation TLV asserting the client close the TCP connection, as
   described in the DNS Session Signaling specification [SessSig].
   Clients MUST correctly handle both cases.






























Pusateri & Cheshire     Expires December 19, 2017              [Page 17]


Internet-Draft           DNS Push Notifications                June 2017


6.3.  DNS Push Notification Updates

   Once a subscription has been successfully established, the server
   generates PUSH messages to send to the client as appropriate.  In the
   case that the answer set was non-empty at the moment the subscription
   was established, an initial PUSH message will be sent immediately
   following the SUBSCRIBE Response.  Subsequent changes to the answer
   set are then communicated to the client in subsequent PUSH messages.











































Pusateri & Cheshire     Expires December 19, 2017              [Page 18]


Internet-Draft           DNS Push Notifications                June 2017


6.3.1.  PUSH Message

   A PUSH message begins with the standard DNS Session Signaling 12-byte
   header [SessSig], followed by the PUSH TLV.  A PUSH message is
   illustrated below:

                                     1  1  1  1  1  1
       0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |                  MESSAGE ID                   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |QR|  Opcode   |         Z          |   RCODE   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             QDCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ANCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             NSCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ARCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |      SSOP-TYPE = PUSH (tentatively 0x42)      |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |  SSOP-LENGTH (number of octets in SSOP-DATA)  |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  \
     \                     NAME                      \   \
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     TYPE                      |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     CLASS                     |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     RDLEN                     |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     \                     RDATA                     \    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+     > SSOP-DATA
     \         NAME                                  \    |
     +--+--+--+--+--+--+-                            |    |
     |         TYPE                Repeated          |    |
     +--+--+--+--+--+--+-                            |    |
     |         CLASS                  As             |    |
     +--+--+--+--+--+--+-                            |    |
     |         RDLEN               Necessary         |    |
     +--+--+--+--+--+--+-                            |    |
     \         RDATA                                 \   /
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  /

                                 Figure 2




Pusateri & Cheshire     Expires December 19, 2017              [Page 19]


Internet-Draft           DNS Push Notifications                June 2017


   The MESSAGE ID field MUST be set to a unique value, that the server
   is not currently using for any other active outgoing request that it
   has sent on this connection.  The MESSAGE ID in the outgoing PUSH
   message is selected by the server and has no relationship to the
   MESSAGE ID in any of the client subscriptions it may relate to.  In
   the PUSH response the client MUST echo back the MESSAGE ID value
   unchanged.

   The other header fields MUST be set as described in the DNS Session
   Signaling specification [SessSig].  The DNS Opcode is the Session
   Signaling Opcode (tentatively 6).  The four count fields MUST be
   empty, and the corresponding four sections MUST be empty (i.e.,
   absent).

   The SSOP-TYPE is PUSH (tentatively 0x41).  The SSOP-LENGTH is the
   length of the SSOP-DATA that follows, which specifies the changes
   being communicated.

   The SSOP-DATA contains one or more Update records.  A PUSH Message
   MUST contain at least one Update record.  If a PUSH Message is
   received that contains no Update records, this is a fatal error, and
   the receiver MUST immediately terminate the connection with a TCP RST
   (or equivalent for other protocols).  The Update records are
   formatted in the customary way for Resource Records in DNS messages
   with the stipulation that DNS name compression is not permitted in
   DNS Session Signaling TLVs.  Update records in a PUSH Message are
   interpreted according to the same rules as for DNS Update [RFC2136]
   messages, namely:

      Delete all RRsets from a name:
      TTL=0, CLASS=ANY, RDLENGTH=0, TYPE=ANY.

      Delete an RRset from a name:
      TTL=0, CLASS=ANY, RDLENGTH=0;
      TYPE specifies the RRset being deleted.

      Delete an individual RR from a name:
      TTL=0, CLASS=NONE;
      TYPE, RDLENGTH and RDATA specifies the RR being deleted.

      Add to an RRset:
      TTL, CLASS, TYPE, RDLENGTH and RDATA specifies the RR being added.

   When processing the records received in a PUSH Message, the receiving
   client MUST validate that the records being added or deleted
   correspond with at least one currently active subscription on that
   connection.  Specifically, the record name MUST match the name given
   in the SUBSCRIBE request, subject to the usual established DNS case-



Pusateri & Cheshire     Expires December 19, 2017              [Page 20]


Internet-Draft           DNS Push Notifications                June 2017


   insensitivity for US-ASCII letters.  If the TYPE in the SUBSCRIBE
   request was not ANY (255) then the TYPE of the record must match the
   TYPE given in the SUBSCRIBE request.  If the CLASS in the SUBSCRIBE
   request was not ANY (255) then the CLASS of the record must match the
   CLASS given in the SUBSCRIBE request.  If a matching active
   subscription on that connection is not found, then that individual
   record addition/deletion is silently ignored.  Processing of other
   additions and deletions in this message is not affected.  The TCP
   connection is not closed.  This is to allow for the unavoidable race
   condition where a client sends an outbound UNSUBSCRIBE while inbound
   PUSH messages for that subscription from the server are still in
   flight.

   In the case where a single change affects more than one active
   subscription, only one PUSH message is sent.  For example, a PUSH
   message adding a given record may match both a SUBSCRIBE request with
   the same TYPE and a different SUBSCRIBE request with TYPE=ANY.  It is
   not the case that two PUSH messages are sent because the new record
   matches two active subscriptions.

   The server SHOULD encode change notifications in the most efficient
   manner possible.  For example, when three AAAA records are deleted
   from a given name, and no other AAAA records exist for that name, the
   server SHOULD send a "delete an RRset from a name" PUSH message, not
   three separate "delete an individual RR from a name" PUSH messages.
   Similarly, when both an SRV and a TXT record are deleted from a given
   name, and no other records of any kind exist for that name, the
   server SHOULD send a "delete all RRsets from a name" PUSH message,
   not two separate "delete an RRset from a name" PUSH messages.

   A server SHOULD combine multiple change notifications in a single
   PUSH message when possible, even if those change notifications apply
   to different subscriptions.  Conceptually, a PUSH message is a
   connection-level mechanism, not a subscription-level mechanism.

   Reception of a PUSH message by a client generates a PUSH response
   back to the server.

   The TTL of an added record is stored by the client and decremented as
   time passes, with the caveat that for as long as a relevant
   subscription is active, the TTL does not decrement below 1 second.
   For as long as a relevant subscription remains active, the client
   SHOULD assume that when a record goes away the server will notify it
   of that fact.  Consequently, a client does not have to poll to verify
   that the record is still there.  Once a subscription is cancelled
   (individually, or as a result of the TCP connection being closed)
   record aging resumes and records are removed from the local cache
   when their TTL reaches zero.



Pusateri & Cheshire     Expires December 19, 2017              [Page 21]


Internet-Draft           DNS Push Notifications                June 2017


6.3.2.  PUSH Response

   Each PUSH message generates exactly one PUSH response from the
   receiver.

   A PUSH response message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], possibly followed by one or more
   optional Modifier TLVs, such as a Retry Delay Modifier TLV.

   The MESSAGE ID field MUST echo the value given in the ID field of the
   PUSH message.

   A PUSH response message MUST NOT contain a Session Signaling
   Operation TLV.  The Session Signaling Operation TLV is NOT copied
   from the PUSH message.

   In a PUSH response the RCODE MUST be zero.  Receiving a PUSH response
   with a nonzero RCODE is a fatal error, and the receiver MUST
   immediately terminate the connection with a TCP RST (or equivalent
   for other protocols).































Pusateri & Cheshire     Expires December 19, 2017              [Page 22]


Internet-Draft           DNS Push Notifications                June 2017


6.4.  DNS Push Notification UNSUBSCRIBE

   To cancel an individual subscription without closing the entire
   connection, the client sends an UNSUBSCRIBE message over the
   established TCP connection to the server.  The UNSUBSCRIBE message is
   encoded in a DNS Session Signaling [SessSig] message.  This
   specification defines a DNS Session Signaling TLV for DNS Push
   Notification UNSUBSCRIBE Requests/Responses (tentatively Session
   Signaling Type Code 0x42).

   A server MUST NOT initiate an UNSUBSCRIBE request.  If a server does
   send a UNSUBSCRIBE request over the connection initiated by a client,
   it is an error and the client should acknowledge the request with the
   error response RCODE NOTAUTH (Not Authoritative).





































Pusateri & Cheshire     Expires December 19, 2017              [Page 23]


Internet-Draft           DNS Push Notifications                June 2017


6.4.1.  UNSUBSCRIBE Request

   An UNSUBSCRIBE request message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], followed by the UNSUBSCRIBE TLV.

                                       1  1  1  1  1  1
         0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |                  MESSAGE ID                   |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |QR|  Opcode   |         Z          |   RCODE   |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |             QDCOUNT (MUST BE ZERO)            |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |             ANCOUNT (MUST BE ZERO)            |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |             NSCOUNT (MUST BE ZERO)            |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |             ARCOUNT (MUST BE ZERO)            |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |  SSOP-TYPE = UNSUBSCRIBE (tentatively 0x42)   |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |             SSOP-LENGTH (2 octets)            |
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
       |              SUBSCRIBE MESSAGE ID             |   SSOP-DATA
       +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

                                 Figure 3

   In the UNSUBSCRIBE TLV the SSOP-TYPE is UNSUBSCRIBE (tentatively
   0x42).  The SSOP-LENGTH is 2 octets.

   The SSOP-DATA contains the MESSAGE ID field of the value given in the
   ID field of an active SUBSCRIBE request.  This is how the server
   knows which SUBSCRIBE request is being cancelled.  After receipt of
   the UNSUBSCRIBE request, the SUBSCRIBE request is no longer active.
   If a server receives an UNSUBSCRIBE message where the MESSAGE ID does
   not match the ID of an active SUBSCRIBE request the server MUST
   return a response containing RCODE = 3 (NXDOMAIN).

   It is allowable for the client to issue an UNSUBSCRIBE request for a
   previous SUBSCRIBE request for which the client has not yet received
   a SUBSCRIBE response.  This is to allow for the case where a client
   starts and stops a subscription in less than the round-trip time to
   the server.  The client is NOT required to wait for the SUBSCRIBE
   response before issuing the UNSUBSCRIBE request.  A consequence of
   this is that if the client issues an UNSUBSCRIBE request for an as-
   yet unacknowledged SUBSCRIBE request, and the SUBSCRIBE request is



Pusateri & Cheshire     Expires December 19, 2017              [Page 24]


Internet-Draft           DNS Push Notifications                June 2017


   subsequently unsuccessful for some reason, then when the UNSUBSCRIBE
   request is eventually processed it will be an UNSUBSCRIBE request for
   a nonexistent subscription, which will result NXDOMAIN response.
















































Pusateri & Cheshire     Expires December 19, 2017              [Page 25]


Internet-Draft           DNS Push Notifications                June 2017


6.4.2.  UNSUBSCRIBE Response

   Each UNSUBSCRIBE request generates exactly one UNSUBSCRIBE response
   from the server.

   An UNSUBSCRIBE response message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], possibly followed by one or more
   optional Modifier TLVs, such as a Retry Delay Modifier TLV.

   The MESSAGE ID field MUST echo the value given in the ID field of the
   UNSUBSCRIBE request.  This is how the client knows which request is
   being responded to.

   An UNSUBSCRIBE response message MUST NOT contain a Session Signaling
   Operation TLV.  The Session Signaling Operation TLV is NOT copied
   from the UNSUBSCRIBE request.

   In the UNSUBSCRIBE response the RCODE indicates whether or not the
   unsubscribe request was successful.  Supported RCODEs are as follows:

   +------------+-------+----------------------------------------------+
   | Mnemonic   | Value | Description                                  |
   +------------+-------+----------------------------------------------+
   | NOERROR    |   0   | UNSUBSCRIBE successful.                      |
   | FORMERR    |   1   | Server failed to process request due to a    |
   |            |       | malformed request.                           |
   | NXDOMAIN   |   3   | Specified subscription does not exist.       |
   | NOTIMP     |   4   | Server does not recognize DNS Session        |
   |            |       | Signaling Opcode.                            |
   | SSOPNOTIMP |   11  | UNSUBSCRIBE operation not supported.         |
   +------------+-------+----------------------------------------------+

                        UNSUBSCRIBE Response codes

   This document specifies only these RCODE values for UNSUBSCRIBE
   Responses.  Servers sending UNSUBSCRIBE Responses SHOULD use one of
   these values.  However, future circumstances may create situations
   where other RCODE values are appropriate in UNSUBSCRIBE Responses, so
   clients MUST be prepared to accept UNSUBSCRIBE Responses with any
   RCODE value.

   Having being successfully revoked with a correctly-formatted
   UNSUBSCRIBE message (resulting in a response with RCODE NOERROR) the
   previously referenced subscription is no longer active and the server
   MAY discard the state associated with it immediately, or later, at
   the server's discretion.





Pusateri & Cheshire     Expires December 19, 2017              [Page 26]


Internet-Draft           DNS Push Notifications                June 2017


   Nonzero RCODE values signal some kind of error.

   RCODE value FORMERR indicates a message format error.

   RCODE value NXDOMAIN indicates a MESSAGE ID that does not correspond
   to any active subscription.

   RCODE values NOTIMP and SSOPNOTIMP should not occur in practice.

   A server would only generate NOTIMP if it did not support Session
   Signaling, and if the server does not support Session Signaling then
   it should not be possible for a client to have an active subscription
   to cancel.

   Similarly, a server would only generate SSOPNOTIMP if it did not
   support Push Notifications, and if the server does not support Push
   Notifications then it should not be possible for a client to have an
   active subscription to cancel.

   Nonzero RCODE values other than NXDOMAIN indicate a serious problem
   with the client.  After sending an error response other than
   NXDOMAIN, the server SHOULD send a DNS Session Signaling Retry Delay
   Operation TLV and then close the TCP connection, as described in the
   DNS Session Signaling specification [SessSig].



























Pusateri & Cheshire     Expires December 19, 2017              [Page 27]


Internet-Draft           DNS Push Notifications                June 2017


6.5.  DNS Push Notification RECONFIRM

   Sometimes, particularly when used with a Discovery Proxy [DisProx], a
   DNS Zone may contain stale data.  When a client encounters data that
   it believe may be stale (e.g., an SRV record referencing a target
   host+port that is not responding to connection requests) the client
   can send a RECONFIRM request to ask the server to re-verify that the
   data is still valid.  For a Discovery Proxy, this causes it to issue
   new Multicast DNS requests to ascertain whether the target device is
   still present.  For other types of DNS server, the RECONFIRM
   operation is currently undefined, and SHOULD result in a NOERROR
   response, but otherwise need not cause any action to occur.  Frequent
   RECONFIRM operations may be a sign of network unreliability, or some
   kind of misconfiguration, so RECONFIRM operations MAY be logged or
   otherwise communicated to a human administrator to assist in
   detecting, and remedying, such network problems.

   If, after receiving a valid RECONFIRM request, the server determines
   that the disputed records are in fact no longer valid, then
   subsequent DNS PUSH Messages will be generated to inform interested
   clients.  Thus, one client discovering that a previously-advertised
   device (like a network printer) is no longer present has the side
   effect of informing all other interested clients that the device in
   question is now gone.



























Pusateri & Cheshire     Expires December 19, 2017              [Page 28]


Internet-Draft           DNS Push Notifications                June 2017


6.5.1.  RECONFIRM Request

   A RECONFIRM request message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], followed by the RECONFIRM TLV.  A
   RECONFIRM request message is illustrated below:

                                     1  1  1  1  1  1
       0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |                  MESSAGE ID                   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |QR|  Opcode   |         Z          |   RCODE   |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             QDCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ANCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             NSCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |             ARCOUNT (MUST BE ZERO)            |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |   SSOP-TYPE = RECONFIRM (tentatively 0x43)    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
     |  SSOP-LENGTH (number of octets in SSOP-DATA)  |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  \
     \                     NAME                      \   \
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     TYPE                      |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     CLASS                     |     > SSOP-DATA
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     |                     RDLEN                     |    |
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+    |
     \                     RDATA                     \   /
     +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+  /

                                 Figure 4

   The MESSAGE ID field MUST be set to a unique value, that the client
   is not using for any other active operation on this connection.  For
   the purposes here, a MESSAGE ID is in use on this connection if the
   client has used it in a request for which it has not yet received a
   response, or if the client has used it for a subscription which it
   has not yet cancelled using UNSUBSCRIBE.  In the RECONFIRM response
   the server MUST echo back the MESSAGE ID value unchanged.

   The other header fields MUST be set as described in the DNS Session
   Signaling specification [SessSig].  The DNS Opcode is the Session



Pusateri & Cheshire     Expires December 19, 2017              [Page 29]


Internet-Draft           DNS Push Notifications                June 2017


   Signaling Opcode (tentatively 6).  The four count fields MUST be
   empty, and the corresponding four sections MUST be empty (i.e.,
   absent).

   The SSOP-TYPE is RECONFIRM (tentatively 0x43).  The SSOP-LENGTH is
   the length of the data that follows, which specifies the name, type,
   class, and content of the record being disputed.

   The SSOP-DATA for a RECONFIRM request MUST contain exactly one
   record.  The SSOP-DATA for a RECONFIRM request has no count field to
   specify more than one record.  Since RECONFIRM requests are sent over
   TCP, multiple RECONFIRM request messages can be concatenated in a
   single TCP stream and packed efficiently into TCP segments.

   TYPE MUST NOT be the value ANY (255) and CLASS MUST NOT be the value
   ANY (255).

   DNS wildcarding is not supported.  That is, a wildcard ("*") in a
   RECONFIRM message matches only a literal wildcard character ("*") in
   the zone, and nothing else.

   Aliasing is not supported.  That is, a CNAME in a RECONFIRM message
   matches only a literal CNAME record in the zone, and nothing else.




























Pusateri & Cheshire     Expires December 19, 2017              [Page 30]


Internet-Draft           DNS Push Notifications                June 2017


6.5.2.  RECONFIRM Response

   Each RECONFIRM request generates exactly one RECONFIRM response from
   the server.

   A RECONFIRM response message begins with the standard DNS Session
   Signaling 12-byte header [SessSig], possibly followed by one or more
   optional Modifier TLVs, such as a Retry Delay Modifier TLV.

   The MESSAGE ID field MUST echo the value given in the ID field of the
   RECONFIRM request.  This is how the client knows which request is
   being responded to.

   A RECONFIRM response message MUST NOT contain a Session Signaling
   Operation TLV.  The Session Signaling Operation TLV is NOT copied
   from the RECONFIRM request.

   In the RECONFIRM response the RCODE confirms receipt of the
   reconfirmation request.  Supported RCODEs are as follows:

   +------------+-------+----------------------------------------------+
   | Mnemonic   | Value | Description                                  |
   +------------+-------+----------------------------------------------+
   | NOERROR    |   0   | RECONFIRM accepted.                          |
   | FORMERR    |   1   | Server failed to process request due to a    |
   |            |       | malformed request.                           |
   | SERVFAIL   |   2   | Server failed to process request due to a    |
   |            |       | problem with the server.                     |
   | NXDOMAIN   |   3   | NOT APPLICABLE. DNS Push Notification        |
   |            |       | servers MUST NOT return NXDOMAIN errors in   |
   |            |       | response to RECONFIRM requests.              |
   | NOTIMP     |   4   | Server does not recognize DNS Session        |
   |            |       | Signaling Opcode.                            |
   | REFUSED    |   5   | Server refuses to process request for policy |
   |            |       | or security reasons.                         |
   | NOTAUTH    |   9   | Server is not authoritative for the          |
   |            |       | requested name.                              |
   | SSOPNOTIMP |   11  | RECONFIRM operation not supported.           |
   +------------+-------+----------------------------------------------+

                         RECONFIRM Response codes

   This document specifies only these RCODE values for RECONFIRM
   Responses.  Servers sending RECONFIRM Responses SHOULD use one of
   these values.  However, future circumstances may create situations
   where other RCODE values are appropriate in RECONFIRM Responses, so
   clients MUST be prepared to accept RECONFIRM Responses with any RCODE
   value.



Pusateri & Cheshire     Expires December 19, 2017              [Page 31]


Internet-Draft           DNS Push Notifications                June 2017


   Nonzero RCODE values signal some kind of error.

   RCODE value FORMERR indicates a message format error, for example
   TYPE or CLASS being ANY (255).

   RCODE value SERVFAIL indicates that the server has exhausted its
   resources or other serious problem occurred.

   RCODE values NOTIMP indicates that the server does not support
   Session Signaling, and Session Signaling is required for RECONFIRM
   requests.

   RCODE value REFUSED indicates that the server supports RECONFIRM
   requests but is currently not configured to accept them from this
   client.

   RCODE value NOTAUTH indicates that the server is not authoritative
   for the requested name, and can do nothing to remedy the apparent
   error.  Note that there may be future cases in which a server is able
   to pass on the RECONFIRM request to the ultimate source of the
   information, and in these cases the server should return NOERROR.

   RCODE value SSOPNOTIMP indicates that the server does not support
   RECONFIRM requests.

   Similarly, a server would only generate SSOPNOTIMP if it did not
   support Push Notifications, and if the server does not support Push
   Notifications then it should not be possible for a client to have an
   active subscription to cancel.

   Nonzero RCODE values SERVFAIL, REFUSED and SSOPNOTIMP are benign from
   the client's point of view.  The client may log them to aid in
   debugging, but otherwise they require no special action.

   Nonzero RCODE values other than these three indicate a serious
   problem with the client.  After sending an error response other than
   one of these three, the server SHOULD send a DNS Session Signaling
   Retry Delay Operation TLV and then close the TCP connection, as
   described in the DNS Session Signaling specification [SessSig].












Pusateri & Cheshire     Expires December 19, 2017              [Page 32]


Internet-Draft           DNS Push Notifications                June 2017


6.6.  Client-Initiated Termination

   An individual subscription is terminated by sending an UNSUBSCRIBE
   TLV for that specific subscription, or all subscriptions can be
   cancelled at once by the client closing the connection.  When a
   client terminates an individual subscription (via UNSUBSCRIBE) or all
   subscriptions on that connection (by closing the connection) it is
   signaling to the server that it is longer interested in receiving
   those particular updates.  It is informing the server that the server
   may release any state information it has been keeping with regards to
   these particular subscriptions.

   After terminating its last subscription on a connection via
   UNSUBSCRIBE, a client MAY close the connection immediately, or it may
   keep it open if it anticipates performing further operations on that
   connection in the future.  If a client wishes to keep an idle
   connection open, it MUST respect the maximum idle time required by
   the server [SessSig].

   If a client plans to terminate one or more subscriptions on a
   connection and doesn't intend to keep that connection open, then as
   an efficiency optimization it MAY instead choose to simply close the
   connection, which implicitly terminates all subscriptions on that
   connection.  This may occur because the client computer is being shut
   down, is going to sleep, the application requiring the subscriptions
   has terminated, or simply because the last active subscription on
   that connection has been cancelled.

   When closing a connection, a client will generally do an abortive
   disconnect, sending a TCP RST.  This immediately discards all
   remaining inbound and outbound data, which is appropriate if the
   client no longer has any interest in this data.  In the BSD Sockets
   API, sending a TCP RST is achieved by setting the SO_LINGER option
   with a time of 0 seconds and then closing the socket.

   If a client has performed operations on this connection that it would
   not want lost (like DNS updates) then the client SHOULD do an orderly
   disconnect, sending a TCP FIN.  In the BSD Sockets API, sending a TCP
   FIN is achieved by calling "shutdown(s,SHUT_WR)" and keeping the
   socket open until all remaining data has been read from it.











Pusateri & Cheshire     Expires December 19, 2017              [Page 33]


Internet-Draft           DNS Push Notifications                June 2017


7.  Security Considerations

   The Strict Privacy Usage Profile for DNS over TLS is strongly
   recommended for DNS Push Notifications as defined in Authentication
   and (D)TLS Profile for DNS-over-(D)TLS
   [I-D.ietf-dprive-dtls-and-tls-profiles].  The Opportunistic Privacy
   Usage Profile is permissible as a way to support incremental
   deployment of security capabilities.  Cleartext connections for DNS
   Push Notifications are not permissible.

   DNSSEC is RECOMMENDED for the authentication of DNS Push Notification
   servers.  TLS alone does not provide complete security.  TLS
   certificate verification can provide reasonable assurance that the
   client is really talking to the server associated with the desired
   host name, but since the desired host name is learned via a DNS SRV
   query, if the SRV query is subverted then the client may have a
   secure connection to a rogue server.  DNSSEC can provided added
   confidence that the SRV query has not been subverted.

7.1.  Security Services

   It is the goal of using TLS to provide the following security
   services:

   Confidentiality:  All application-layer communication is encrypted
      with the goal that no party should be able to decrypt it except
      the intended receiver.

   Data integrity protection:  Any changes made to the communication in
      transit are detectable by the receiver.

   Authentication:  An end-point of the TLS communication is
      authenticated as the intended entity to communicate with.

   Deployment recommendations on the appropriate key lengths and cypher
   suites are beyond the scope of this document.  Please refer to TLS
   Recommendations [RFC7525] for the best current practices.  Keep in
   mind that best practices only exist for a snapshot in time and
   recommendations will continue to change.  Updated versions or errata
   may exist for these recommendations.

7.2.  TLS Name Authentication

   As described in Section 6.1, the client discovers the DNS Push
   Notification server using an SRV lookup for the record name
   "_dns-push-tls._tcp.<zone>".  The server connection endpoint SHOULD
   then be authenticated using DANE TLSA records for the associated SRV
   record.  This associates the target's name and port number with a



Pusateri & Cheshire     Expires December 19, 2017              [Page 34]


Internet-Draft           DNS Push Notifications                June 2017


   trusted TLS certificate [RFC7673].  This procedure uses the TLS Sever
   Name Indication (SNI) extension [RFC6066] to inform the server of the
   name the client has authenticated through the use of TLSA records.
   Therefore, if the SRV record passes DNSSEC validation and a TLSA
   record matching the target name is useable, an SNI extension must be
   used for the target name to ensure the client is connecting to the
   server it has authenticated.  If the target name does not have a
   usable TLSA record, then the use of the SNI extension is optional.

   See Authentication and (D)TLS Profile for DNS-over-(D)TLS
   [I-D.ietf-dprive-dtls-and-tls-profiles] for more information on
   authenticating domain names.  Also note that a DNS Push server is an
   authoritative server and a DNS Push client is a standard DNS client.
   While the terminology in Authentication and (D)TLS Profile for DNS-
   over-(D)TLS [I-D.ietf-dprive-dtls-and-tls-profiles] explicitly states
   it does not apply to authoritative servers, it does in this case
   apply to DNS Push Notification clients and servers.

7.3.  TLS Compression

   In order to reduce the chances of compression-related attacks, TLS-
   level compression SHOULD be disabled when using TLS versions 1.2 and
   earlier.  In the draft version of TLS 1.3 [I-D.ietf-tls-tls13], TLS-
   level compression has been removed completely.

7.4.  TLS Session Resumption

   TLS Session Resumption is permissible on DNS Push Notification
   servers.  The server may keep TLS state with Session IDs [RFC5246] or
   operate in stateless mode by sending a Session Ticket [RFC5077] to
   the client for it to store.  However, once the connection is closed,
   any existing subscriptions will be dropped.  When the TLS session is
   resumed, the DNS Push Notification server will not have any
   subscription state and will proceed as with any other new connection.
   Use of TLS Session Resumption allows a new TLS connection to be set
   up more quickly, but the client will still have to recreate any
   desired subscriptions.

8.  IANA Considerations

   This document defines the service name: "_dns-push-tls._tcp".
   It is only applicable for the TCP protocol.
   This name is to be published in the IANA Service Name Registry
   [RFC6335][SN].

   This document defines four DNS Session Signaling TLV types: SUBSCRIBE
   with (tentative) value 0x40 (64), PUSH with (tentative) value 0x41




Pusateri & Cheshire     Expires December 19, 2017              [Page 35]


Internet-Draft           DNS Push Notifications                June 2017


   (65), UNSUBSCRIBE with (tentative) value 0x42 (66), and RECONFIRM
   with (tentative) value 0x43 (67).

9.  Acknowledgements

   The authors would like to thank Kiren Sekar and Marc Krochmal for
   previous work completed in this field.

   This draft has been improved due to comments from Ran Atkinson, Tim
   Chown, Mark Delany, Ralph Droms, Bernie Volz, Jan Komissar, Manju
   Shankar Rao, Markus Stenberg, Dave Thaler, Soraia Zlatkovic, Sara
   Dickinson, and Andrew Sullivan.

10.  References

10.1.  Normative References

   [I-D.ietf-tls-tls13]
              Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", draft-ietf-tls-tls13-20 (work in progress),
              April 2017.

   [RFC0768]  Postel, J., "User Datagram Protocol", STD 6, RFC 768,
              DOI 10.17487/RFC0768, August 1980,
              <http://www.rfc-editor.org/info/rfc768>.

   [RFC0793]  Postel, J., "Transmission Control Protocol", STD 7,
              RFC 793, DOI 10.17487/RFC0793, September 1981,
              <http://www.rfc-editor.org/info/rfc793>.

   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
              STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
              <http://www.rfc-editor.org/info/rfc1034>.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <http://www.rfc-editor.org/info/rfc1035>.

   [RFC1123]  Braden, R., Ed., "Requirements for Internet Hosts -
              Application and Support", STD 3, RFC 1123,
              DOI 10.17487/RFC1123, October 1989,
              <http://www.rfc-editor.org/info/rfc1123>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.




Pusateri & Cheshire     Expires December 19, 2017              [Page 36]


Internet-Draft           DNS Push Notifications                June 2017


   [RFC2136]  Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound,
              "Dynamic Updates in the Domain Name System (DNS UPDATE)",
              RFC 2136, DOI 10.17487/RFC2136, April 1997,
              <http://www.rfc-editor.org/info/rfc2136>.

   [RFC2782]  Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
              specifying the location of services (DNS SRV)", RFC 2782,
              DOI 10.17487/RFC2782, February 2000,
              <http://www.rfc-editor.org/info/rfc2782>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [RFC6066]  Eastlake 3rd, D., "Transport Layer Security (TLS)
              Extensions: Extension Definitions", RFC 6066,
              DOI 10.17487/RFC6066, January 2011,
              <http://www.rfc-editor.org/info/rfc6066>.

   [RFC6335]  Cotton, M., Eggert, L., Touch, J., Westerlund, M., and S.
              Cheshire, "Internet Assigned Numbers Authority (IANA)
              Procedures for the Management of the Service Name and
              Transport Protocol Port Number Registry", BCP 165,
              RFC 6335, DOI 10.17487/RFC6335, August 2011,
              <http://www.rfc-editor.org/info/rfc6335>.

   [RFC6895]  Eastlake 3rd, D., "Domain Name System (DNS) IANA
              Considerations", BCP 42, RFC 6895, DOI 10.17487/RFC6895,
              April 2013, <http://www.rfc-editor.org/info/rfc6895>.

   [RFC7673]  Finch, T., Miller, M., and P. Saint-Andre, "Using DNS-
              Based Authentication of Named Entities (DANE) TLSA Records
              with SRV Records", RFC 7673, DOI 10.17487/RFC7673, October
              2015, <http://www.rfc-editor.org/info/rfc7673>.

   [RFC7766]  Dickinson, J., Dickinson, S., Bellis, R., Mankin, A., and
              D. Wessels, "DNS Transport over TCP - Implementation
              Requirements", RFC 7766, DOI 10.17487/RFC7766, March 2016,
              <http://www.rfc-editor.org/info/rfc7766>.

   [SessSig]  Bellis, R., Cheshire, S., Dickinson, J., Dickinson, S.,
              Mankin, A., and T. Pusateri, "DNS Session Signaling",
              draft-ietf-dnsop-session-signal-02 (work in progress),
              March 2017.






Pusateri & Cheshire     Expires December 19, 2017              [Page 37]


Internet-Draft           DNS Push Notifications                June 2017


   [SN]       "Service Name and Transport Protocol Port Number
              Registry", <http://www.iana.org/assignments/
              service-names-port-numbers/>.

10.2.  Informative References

   [DisProx]  Cheshire, S., "Hybrid Unicast/Multicast DNS-Based Service
              Discovery", draft-ietf-dnssd-hybrid-06 (work in progress),
              March 2017.

   [I-D.dukkipati-tcpm-tcp-loss-probe]
              Dukkipati, N., Cardwell, N., Cheng, Y., and M. Mathis,
              "Tail Loss Probe (TLP): An Algorithm for Fast Recovery of
              Tail Losses", draft-dukkipati-tcpm-tcp-loss-probe-01 (work
              in progress), February 2013.

   [I-D.ietf-dprive-dtls-and-tls-profiles]
              Dickinson, S., Gillmor, D., and T. Reddy, "Usage and
              (D)TLS Profiles for DNS-over-(D)TLS", draft-ietf-dprive-
              dtls-and-tls-profiles-10 (work in progress), June 2017.

   [I-D.sekar-dns-llq]
              Sekar, K., "DNS Long-Lived Queries", draft-sekar-dns-
              llq-01 (work in progress), August 2006.

   [IPJ.9-4-TCPSYN]
              Eddy, W., "Defenses Against TCP SYN Flooding Attacks", The
              Internet Protocol Journal, Cisco Systems, Volume 9,
              Number 4, December 2006.

   [obs]      "Observer Pattern", <https://en.wikipedia.org/wiki/
              Observer_pattern>.

   [RFC2308]  Andrews, M., "Negative Caching of DNS Queries (DNS
              NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998,
              <http://www.rfc-editor.org/info/rfc2308>.

   [RFC4287]  Nottingham, M., Ed. and R. Sayre, Ed., "The Atom
              Syndication Format", RFC 4287, DOI 10.17487/RFC4287,
              December 2005, <http://www.rfc-editor.org/info/rfc4287>.

   [RFC4953]  Touch, J., "Defending TCP Against Spoofing Attacks",
              RFC 4953, DOI 10.17487/RFC4953, July 2007,
              <http://www.rfc-editor.org/info/rfc4953>.







Pusateri & Cheshire     Expires December 19, 2017              [Page 38]


Internet-Draft           DNS Push Notifications                June 2017


   [RFC5077]  Salowey, J., Zhou, H., Eronen, P., and H. Tschofenig,
              "Transport Layer Security (TLS) Session Resumption without
              Server-Side State", RFC 5077, DOI 10.17487/RFC5077,
              January 2008, <http://www.rfc-editor.org/info/rfc5077>.

   [RFC6281]  Cheshire, S., Zhu, Z., Wakikawa, R., and L. Zhang,
              "Understanding Apple's Back to My Mac (BTMM) Service",
              RFC 6281, DOI 10.17487/RFC6281, June 2011,
              <http://www.rfc-editor.org/info/rfc6281>.

   [RFC6762]  Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762,
              DOI 10.17487/RFC6762, February 2013,
              <http://www.rfc-editor.org/info/rfc6762>.

   [RFC6763]  Cheshire, S. and M. Krochmal, "DNS-Based Service
              Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013,
              <http://www.rfc-editor.org/info/rfc6763>.

   [RFC6824]  Ford, A., Raiciu, C., Handley, M., and O. Bonaventure,
              "TCP Extensions for Multipath Operation with Multiple
              Addresses", RFC 6824, DOI 10.17487/RFC6824, January 2013,
              <http://www.rfc-editor.org/info/rfc6824>.

   [RFC7413]  Cheng, Y., Chu, J., Radhakrishnan, S., and A. Jain, "TCP
              Fast Open", RFC 7413, DOI 10.17487/RFC7413, December 2014,
              <http://www.rfc-editor.org/info/rfc7413>.

   [RFC7525]  Sheffer, Y., Holz, R., and P. Saint-Andre,
              "Recommendations for Secure Use of Transport Layer
              Security (TLS) and Datagram Transport Layer Security
              (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
              2015, <http://www.rfc-editor.org/info/rfc7525>.

   [RFC7719]  Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
              Terminology", RFC 7719, DOI 10.17487/RFC7719, December
              2015, <http://www.rfc-editor.org/info/rfc7719>.

   [RFC7858]  Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D.,
              and P. Hoffman, "Specification for DNS over Transport
              Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May
              2016, <http://www.rfc-editor.org/info/rfc7858>.

   [XEP0060]  Millard, P., Saint-Andre, P., and R. Meijer, "Publish-
              Subscribe", XSF XEP 0060, July 2010.







Pusateri & Cheshire     Expires December 19, 2017              [Page 39]


Internet-Draft           DNS Push Notifications                June 2017


Authors' Addresses

   Tom Pusateri
   Seeking affiliation
   Hilton Head Island, SC
   USA

   Phone: +1 843 473 7394
   Email: pusateri@bangj.com


   Stuart Cheshire
   Apple Inc.
   1 Infinite Loop
   Cupertino, CA  95014
   USA

   Phone: +1 408 974 3207
   Email: cheshire@apple.com
































Pusateri & Cheshire     Expires December 19, 2017              [Page 40]


Html markup produced by rfcmarkup 1.124, available from https://tools.ietf.org/tools/rfcmarkup/