[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]
Versions: (draft-bosch-sieve-special-use) 00
01 02 03 04 05 RFC 8579
EXTRA S. Bosch
Internet-Draft Dovecot Oy
Intended status: Standards Track November 27, 2018
Expires: May 31, 2019
Sieve Email Filtering: Delivering to Special-Use Mailboxes
draft-ietf-extra-sieve-special-use-04
Abstract
The SPECIAL-USE capability of the IMAP protocol (RFC 6154) allows
clients to identify special-use mailboxes; e.g., where draft or sent
messages should be put. This simplifies client configuration. In
contrast, the Sieve mail filtering language (RFC 5228) currently has
no such capability. This memo defines a Sieve extension that fills
this gap: it adds a test for checking whether a special-use attribute
is assigned for a particular mailbox or any mailbox, and it adds the
ability to file messages into an anonymous mailbox that has a
particular special-use attribute assigned.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 31, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
Bosch Expires May 31, 2019 [Page 1]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in This Document . . . . . . . . . . . . . . 3
3. Test "specialuse_exists" . . . . . . . . . . . . . . . . . . 3
3.1. Equivalent IMAP Operations . . . . . . . . . . . . . . . 4
4. ":specialuse" Argument to "fileinto" Command . . . . . . . . 5
4.1. Mailboxes Created Implicitly by the "fileinto" Command . 6
4.2. Equivalent IMAP Operations . . . . . . . . . . . . . . . 7
5. Sieve Capability Strings . . . . . . . . . . . . . . . . . . 8
6. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. Security Considerations . . . . . . . . . . . . . . . . . . . 9
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 10
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 10
10.1. Normative References . . . . . . . . . . . . . . . . . . 10
10.2. Informative References . . . . . . . . . . . . . . . . . 11
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Introduction
Commonly, several mailboxes in an IMAP message store [IMAP] have a
special use; e.g. it is where the user's draft messages are stored,
where a copy of sent messages are kept, or it is where spam messages
are filed automatically at delivery. The SPECIAL-USE capability
[SPECIAL-USE] of the IMAP protocol defines mailbox attributes that
identify these special mailboxes explicitly to the client. This way,
client configuration is simplified significantly. Using the CREATE-
SPECIAL-USE capability [SPECIAL-USE], IMAP clients can also configure
these attributes dynamically based on user preference.
Unlike the IMAP protocol, the Sieve mail filtering language [SIEVE]
currently cannot freely access these special-use mailbox attributes.
Particularly, the Sieve interpreter cannot find an anonymous mailbox
that has a particular special-use attribute assigned. This would be
very useful for example to find the user's Spam mailbox at delivery.
In Sieve, limited access to the special-use attributes is provided
using the "mboxmetadata" extension [SIEVE-MAILBOX], which allows
testing for the presence of a special-use attribute in the "/private/
specialuse" IMAP METADATA [IMAP-METADATA] entry of a mailbox. Still,
not all implementers will be willing to add the complexity of the
Bosch Expires May 31, 2019 [Page 2]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
IMAP METADATA capability, just to provide access to special-use
attributes to the Sieve interpreter.
This document defines an extension to the Sieve mail filtering
language that adds the ability to freely access mailbox special-use
attributes. It adds a test called "specialuse_exists" that checks
whether a special-use attribute is assigned for a particular mailbox
or - if omitted - any of the user's personal mailboxes. It also adds
the ability to file messages into an anonymous personal mailbox that
has a particular special-use attribute assigned using a ":specialuse"
argument for the "fileinto" command [SIEVE].
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [KEYWORDS].
Conventions for notations are as in [SIEVE] Section 1.1, including
use of the "Usage:" label for the definition of action and tagged
arguments syntax.
In [IMAP] examples, "C:" and "S:" indicate lines sent by the client
and server respectively. If such lines are wrapped without a new
"C:" or "S:" label, then the wrapping is for editorial clarity and is
not part of the command.
3. Test "specialuse_exists"
Usage: specialuse_exists [<mailbox: string>]
<special-use-flags: string-list>
If the "mailbox" string argument is omitted, the "specialuse_exists"
test yields true if all of the following statements are true for each
of the special-use flags listed in the "special-use-flags" argument:
a. at least one mailbox exists in the user's personal namespace
[NAMESPACE] that has that particular special-use flag assigned,
and
b. that mailbox allows the user in whose context the Sieve script
runs to "deliver" messages into it.
If the "mailbox" argument is specified, the "specialuse_exists" test
yields true if all of the following statements are true:
a. the indicated mailbox exists,
Bosch Expires May 31, 2019 [Page 3]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
b. that mailbox allows the user in whose context the Sieve script
runs to "deliver" messages into it, and
c. that mailbox has all of the special-use flags listed in the
"special-use-flags" argument assigned to it.
Refer to the specification of the "mailboxexists" test in Section 3.1
of RFC 5490 [SIEVE-MAILBOX] for a definition of when "delivery" of
messages into a mailbox is deemed possible.
3.1. Equivalent IMAP Operations
To clarify, a sequence of [IMAP] commands that a client could send to
perform an assessment without Sieve that is equivalent to the
"specialuse_exists" test is shown in the following IMAP protocol
examples.
First, the client queries which namespaces are available using the
NAMESPACE command [NAMESPACE]:
C: A01 NAMESPACE
S: * NAMESPACE (("INBOX/" "/")("Archive/" "/")) NIL (("Public/" "/"))
S: A01 OK NAMESPACE command completed
Subsequently, when no particular mailbox is of interest (i.e., the
"specialuse_exists" test has no mailbox argument), the client lists
all mailboxes with special-use flags in the two returned personal
namespaces (this extended LIST command requires the LIST-EXTENDED
IMAP capability [LIST-EXTENDED]):
C: A02 LIST (SPECIAL-USE) "" ("INBOX/*" "Archive/*")
RETURN (SPECIAL-USE)
S: * LIST (\Drafts) "/" INBOX/Drafts
S: * LIST (\Trash) "/" INBOX/Trash
S: * LIST (\Sent) "/" INBOX/Sent
S: * LIST (\Archive) "/" Archive/Default
S: A02 OK LIST command completed
Finally, using the MYRIGHTS command [IMAP-ACL], the client determines
the access rights it has for the mailbox or mailboxes that have all
the requested flags assigned. This way, it can determine whether
messages can be saved to any of those. In this example, an
"\Archive" special-use mailbox is sought:
C: A03 MYRIGHTS Archive/Default
S: * MYRIGHTS Archive/Default lrwsip
S: A03 OK Myrights completed
Bosch Expires May 31, 2019 [Page 4]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
The MYRIGHTS response indicates that the the user has "insert" rights
[IMAP-ACL] for the "Archive/Default" mailbox, meaning that the client
can deliver (APPEND) messages to that mailbox and that the Sieve
"specialuse_exists" test would yield "true" in this case.
4. ":specialuse" Argument to "fileinto" Command
Usage: fileinto [:specialuse <special-use-flag: string>]
<mailbox: string>
Normally, the "fileinto" command delivers the message in the mailbox
specified using its positional mailbox argument. However, if the
optional ":specialuse" argument is also specified, the "fileinto"
command first checks whether a mailbox exists in the user's personal
namespace [NAMESPACE] with the specified special-use flag assigned to
it. If that is the case, that special-use mailbox is used for
delivery instead. If there is no such mailbox or if the specified
special-use flag is unknown to the implementation in general, the
"fileinto" action proceeds as it would without the ":specialuse"
argument.
Summarizing, if the ":specialuse" argument is specified, the fileinto
command deals with two mailboxes that may or may not exist:
o An anonymous special-use mailbox in the user's personal namespace,
which has at least the special-use flag specified with the
":specialuse" argument assigned to it.
o The default mailbox named by the positional string argument of the
"fileinto" command, which is used when the special-use mailbox is
not found.
The special-use flag specified with the ":specialuse" argument MUST
conform to the "use-attr" syntax described in Section 6 of RFC6154
[SIEVE-MAILBOX]. Implementations SHOULD handle an invalid special-
use flag in the same way as an invalid mailbox name is handled. The
string parameter of the ":specialuse" argument is not a constant
string, which means that variable substitutions are allowed when the
"variables" extension [VARIABLES] is active. In that case, the
syntax of the special-use flag is only verified at runtime.
If neither the special-use mailbox nor the default mailbox exists,
the "fileinto" action MUST proceed exactly as it does in case the
":specialuse" is argument is absent and the mailbox named by its
positional argument does not exist. The various options for handling
this situation are described in Section 4.1 of RFC5228 [SIEVE].
Bosch Expires May 31, 2019 [Page 5]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
More than one mailbox in the user's personal namespace can have a
particular special-use flag assigned. If one of those mailboxes is
in fact the default mailbox named by the positional string argument
of the "fileinto" command, that mailbox MUST be used for delivery.
If the default mailbox is not one of the options, the mailbox that is
chosen for delivery is implementation-defined. However, while the
set of mailboxes to which the involved special-use flags are assigned
remains unchanged, implementations SHOULD ensure that the mailbox
choice is made consistently, so that the same mailbox is used every
time. Conversely, the chosen mailbox MAY change once the special-use
flag assignments that are relevant for the mailbox choice are changed
(usually by user interaction).
If delivery to the special-use mailbox fails for reasons not relating
to its existence, the Sieve interpreter MUST NOT subsequently attempt
delivery in the indicated default mailbox as a fall-back. Instead,
it MUST proceed exactly as it does in case the ":specialuse" argument
is absent and delivery to the mailbox named by its positional
argument fails. This prevents the situation where messages are
unexpectedly spread over two mailboxes in case transient or
intermittent delivery failures occur.
4.1. Mailboxes Created Implicitly by the "fileinto" Command
Before attempting to deliver the message into the specified mailbox,
the "fileinto" command may implicitly create the mailbox if it does
not exist (see Section 4.1 of RFC5228 [SIEVE]). This optional
behavior can be requested explicitly using the "mailbox" extension
[SIEVE-MAILBOX], which adds the optional ":create" argument to the
"fileinto" command. If the ":create" argument is specified with
"fileinto", it instructs the Sieve interpreter to unconditionally
create the specified mailbox if needed. Note that the ":create"
argument has no effect when the implicit creation of mailboxes for
delivery is the default behavior.
When the ":specialuse" argument is present, this behavior does not
change: the Sieve interpreter will implicitly create the specified
default mailbox if needed. This need arises when both the special-
use mailbox and the default mailbox are not found.
If the server implementation supports the CREATE-SPECIAL-USE
capability [SPECIAL-USE] for IMAP (i.e., it allows assigning special-
use flags to new mailboxes) it SHOULD assign the special-use flag
specified with the ":specialuse" argument to the newly created
mailbox.
Bosch Expires May 31, 2019 [Page 6]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
4.2. Equivalent IMAP Operations
To clarify, a sequence of [IMAP] commands that a client could send to
perform an action without Sieve that is equivalent to the "fileinto"
action with the ":specialuse" argument is shown in the following IMAP
protocol examples. The following Sieve script is assumed:
require "fileinto";
require "special-use";
fileinto :specialuse "\\Archive" "INBOX/Archive";
First, the client proceeds as in Section 3.1 to find out whether the
indicated special-use flag is assigned to any mailbox in the user's
personal namespace. If a matching special-use mailbox is found, the
message is delivered there using the IMAP APPEND command. If no
matching special-use mailbox is found, the client attempts to deliver
the message to the indicated default mailbox:
C: A04 APPEND INBOX/Archive {309}
S: A04 NO [TRYCREATE] Mailbox does not exist: Archive/Personal
In this example, the default mailbox does not exist either. In that
case, the client MAY create the default mailbox and assign the
indicated special-use flag to it:
C: A05 CREATE INBOX/Archive (USE (\Archive))
S: A05 OK Create completed
Finally, the client completes the delivery:
C: A06 APPEND INBOX/Archive {309}
S: + OK
C: Date: Wed, 18 Jul 2018 22:00:09 +0200
C: From: mooch@owatagu.siam.edu
C: To: Fred Foobar <foobar@Blurdybloop.com>
C: Subject: afternoon meeting
C: Message-Id: <Q234234-01012222@owatagu.siam.edu>
C: MIME-Version: 1.0
C: Content-Type: text/plain; charset=UTF-8
C:
C: Hi Fred, do you think we can meet again at 3:30 tomorrow?
C:
S: A06 OK [APPENDUID 1533375901 2312] Append completed.
Bosch Expires May 31, 2019 [Page 7]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
5. Sieve Capability Strings
A Sieve implementation that defines the "specialuse_exists" test and
the ":specialuse" argument for the "fileinto" command will advertise
the capability string "special-use".
6. Examples
The following example saves the message in the mailbox where messages
deemed to be junk mail are held. This mailbox is identified using
the "\Junk" special-use attribute. If no mailbox has this attribute
assigned, the message is filed into the mailbox named "Spam". If the
mailbox named "Spam" does not exist either, the result of this Sieve
script is implementation-dependent: e.g., it may trigger an error or
the mailbox may be created implicitly.
require "fileinto";
require "special-use";
fileinto :specialuse "\\Junk" "Spam";
The following very similar example explicitly handles the case in
which neither a "\Junk" special-use mailbox nor the "Spam" mailbox
exist. In that case, a mailbox called "Spam" is created, and the
message is stored there. Additionally, the "\Junk" special-use
attribute may be assigned to it.
require "fileinto";
require "special-use";
require "mailbox";
fileinto :specialuse "\\Junk" :create "Spam";
The following example is used in a Sieve script that is triggered
from an IMAP event, rather than at message delivery [IMAPSIEVE].
This Sieve script redirects messages to an automated recipient that
processes junk mail, if those messages are copied or moved into a
mailbox that has the "\Junk" special-use attribute assigned.
Bosch Expires May 31, 2019 [Page 8]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
require "imapsieve";
require "special-use";
require "environment";
require "variables";
if environment :contains "imap.mailbox" "*" {
set "mailbox" "${1}";
}
if allof(
environment "imap.cause" "COPY",
specialuse_exists "${mailbox}" "\\Junk") {
redirect "spam-report@example.org";
}
7. Security Considerations
Security considerations are discussed in [SIEVE], [VARIABLES], and
[SPECIAL-USE]. It is believed that this extension does not introduce
any additional security concerns.
Note that this specification explicitly restricts the anonymous
special-use mailbox to the user's personal namespace. First, this
avoids the need to search the entire mail storage for mailboxes that
have a particular special-use flag assigned. This could put undue
load on the system, while shared special-use mailboxes are deemed of
limited use with the currently defined special-use flags. Secondly,
it prevents security concerns with shared mailboxes that have
special-use flags assigned that apply to all users. Searching the
entire mail storage for special-use mailboxes could lead to messages
unexpectedly or even maliciously being filed to shared mailboxes.
This restriction could be lifted for particular future special-use
flags, but such new flags should have a clear application for shared
mailboxes and the security concerns should be considered carefully.
8. IANA Considerations
The following template specifies the IANA registration of the Sieve
extension specified in this document:
Bosch Expires May 31, 2019 [Page 9]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
To: iana@iana.org
Subject: Registration of new Sieve extension
Capability name: special-use
Description: adds a test for checking whether an IMAP
special-use attribute is assigned for a
particular mailbox or any mailbox, and it adds
the ability to file messages into an anonymous
mailbox that has a particular IMAP special-use
attribute assigned.
RFC number: this RFC
Contact address: Sieve mailing list <sieve@ietf.org>
This information should be added to the list of sieve extensions
given on http://www.iana.org/assignments/sieve-extensions.
9. Acknowledgements
Thanks to Stan Kalisch, Barry Leiba, Alexey Melnikov, Ken Murchison,
and Ned Freed for reviews and suggestions.
Thanks to the authors of RFC5490 [SIEVE-MAILBOX] from which some
descriptive text is borrowed in this document.
10. References
10.1. Normative References
[IMAP-METADATA]
Daboo, C., "The IMAP METADATA Extension", RFC 5464,
DOI 10.17487/RFC5464, February 2009,
<http://www.rfc-editor.org/info/rfc5464>.
[KEYWORDS]
Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[NAMESPACE]
Gahrns, M. and C. Newman, "IMAP4 Namespace", RFC 2342,
DOI 10.17487/RFC2342, May 1998, <https://www.rfc-
editor.org/info/rfc2342>.
[SIEVE] Guenther, P. and T. Showalter, "Sieve: An Email Filtering
Language", RFC 5228, January 2008.
Bosch Expires May 31, 2019 [Page 10]
Internet-Draft Sieve: Special-Use Mailboxes November 2018
[SIEVE-MAILBOX]
Melnikov, A., "The Sieve Mail-Filtering Language --
Extensions for Checking Mailbox Status and Accessing
Mailbox Metadata", RFC 5490, March 2009.
[SPECIAL-USE]
Leiba, B. and J. Nicolson, "IMAP LIST Extension for
Special-Use Mailboxes", RFC 6154, DOI 10.17487/RFC6154,
March 2011, <http://www.rfc-editor.org/info/rfc6154>.
[VARIABLES]
Homme, K., "Sieve Email Filtering: Variables Extension",
RFC 5229, January 2008.
10.2. Informative References
[IMAP] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003,
<http://www.rfc-editor.org/info/rfc3501>.
[IMAP-ACL]
Melnikov, A., "IMAP4 Access Control List (ACL) Extension",
RFC 4314, DOI 10.17487/RFC4314, December 2005,
<https://www.rfc-editor.org/info/rfc4314>.
[IMAPSIEVE]
Leiba, B., "Support for Internet Message Access Protocol
(IMAP) Events in Sieve", RFC 6785, DOI 10.17487/RFC6785,
November 2012, <http://www.rfc-editor.org/info/rfc6785>.
[LIST-EXTENDED]
Leiba, B. and A. Melnikov, "Internet Message Access
Protocol version 4 - LIST Command Extensions", RFC 5258,
DOI 10.17487/RFC5258, June 2008, <https://www.rfc-
editor.org/info/rfc5258>.
Author's Address
Stephan Bosch
Dovecot Oy
Lars Sonckin Kaari 12
Espoo 02600
Finland
Email: stephan.bosch@dovecot.fi
Bosch Expires May 31, 2019 [Page 11]
Html markup produced by rfcmarkup 1.129d, available from
https://tools.ietf.org/tools/rfcmarkup/