[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-squire-hubmib-efm-mib) 00 01 02 03 04 05 06 RFC 4878 Draft is active
In: Proposed Standard
   Ethernet Interfaces and Hub MIB WG
   Internet Draft                                           Matt Squire
   Document: draft-ietf-hubmib-efm-mib-01.txt         Hatteras Networks
   Expires: December 2004                                    June, 2004


                 Ethernet in the First Mile (EFM) OAM MIB


Status of this Memo

   By submitting this Internet-Draft, I certify that any applicable
   patent or other IPR claims of which I am aware have been disclosed,
   and any of which I become aware will be disclosed, in accordance with
   RFC 3668 [RFC3668].

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC 2026 [RFC2026].

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
        http://www.ietf.org/ietf/1id-abstracts.txt
   The list of Internet-Draft Shadow Directories can be accessed at
        http://www.ietf.org/shadow.html.


Abstract

   This document defines objects for managing Operations,
   Administration, and Maintenance (OAM) capabilities on Ethernet-like
   interfaces conformant to the Ethernet OAM functionality defined in
   [802.3ah].   The Ethernet OAM functionality is complementary to SNMP
   management in that it is focused on a small set of link-specific
   functions for Ethernet interfaces.  This document defines objects for
   controlling those link OAM functions, and on providing mechanisms to
   take status and input from Ethernet OAM and feed it into a larger
   TCP/IP network management system.


Conventions used in this document



M. Squire              Expires - December 2004               [Page 1]


                             EFM OAM MIB                    June 2004


   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

Table of Contents

   1. Introduction...................................................2
   2. The Internet-Standard Management Framework.....................2
   3. Overview.......................................................3
      3.1 Remote fault indication....................................4
      3.2 Link monitoring............................................4
      3.3 Remote loopback............................................4
   4. Relation to the Other MIBs.....................................5
      4.1 Relation to other SNMP MIBs................................5
      4.2 IANA Considerations........................................5
      4.3 Mapping of IEEE 802.3ah Managed Objects....................5
   5. MIB Structure..................................................7
   6. MIB Definition.................................................7
   7. Security Considerations.......................................54
   8. References....................................................55
      8.1 Normative References......................................55
      8.2 Informative References....................................56
   9. Acknowledgments...............................................57
   10. Author's Address.............................................57
   11. Intellectual Property Statement..............................58
   12. Copyright Statement..........................................58


1. Introduction

   The IEEE 802.3ah Ethernet in the First Mile (EFM) task force added
   new management capabilities to Ethernet like interfaces.  These
   management capabilities were introduced to provide some basic OAM
   function on Ethernet media.  The defined functionality includes
   discovery, error signaling, loopback, and link monitoring.  This memo
   defines a portion of the Management Information Base (MIB) for use
   with network management protocols in the Internet community to manage
   these new EFM interface capabilities.


2. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).


M. Squire              Expires - December 2004               [Page 2]


                             EFM OAM MIB                    June 2004


   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].


3. Overview

   Ethernet networks have evolved over the past 30 years from simple
   LANs to a variety of other applications, including wide area
   networks.  To address some of these emerging markets, the IEEE
   802.3ah task force defined additional clauses for the IEEE 802.3
   standard [802.3-2002] to better address Ethernet deployments in the
   public access network.

   The Ethernet in the First Mile (EFM) task force was focused on four
   somewhat independent objectives to better address Ethernet access
   deployments: optics, copper, Ethernet passive optical networks
   (Ethernet PON, or EPON), and operations, administration, and
   maintenance (OAM).  The optics sub-taskforce developed new optical
   physical layers that better served the long-reach outside plant
   networks typically found in the access network, including developing
   physical layers that operate up to 20Km and supporting the
   environmental conditions of outside deployments.  The copper sub
   taskforce developed two new physical layers that run Ethernet
   natively over existing twisted pair wires that have been supporting
   voice services for decades.  The EPON sub-taskforce developed a new
   point-to-multipoint Ethernet physical layer, utilizing Ethernet
   framing natively over a time-division multiple-access (TDMA)
   infrastructure.  The OAM sub-taskforce introduced some basic
   management functionality into an Ethernet link to better monitor and
   maintain Ethernet networks in geographically disparate networks.

   This document defines the management objects necessary to integrate
   Ethernet OAM functionality into the SNMP management framework.

   Ethernet OAM is composed of a core set of functions and a set of
   optional functional groups that are not required to be implemented
   along with the core set.  The mandatory functions include discovery
   operations (determining if the other end of the link is OAM capable,
   and what OAM functions it implements), state machine implementation,
   and some critical event flows.  The optional functional groups are
   for (a) link events, (b) remote loopback, and (c) variable retrieval
   and response.  Each optional functional group is controlled by a
   separate MIB table(s).

   Ethernet OAM is complementary, not competitive, with SNMP management
   in that it provides some basic management functions at layer two,


M. Squire              Expires - December 2004               [Page 3]


                             EFM OAM MIB                    June 2004


   rather than using layer three and above as required by SNMP over an
   IP infrastructure.  Ethernet OAM provides single-hop functionality in
   that it works only between two directly connected Ethernet stations.
   SNMP can be used to manage the Ethernet OAM interactions of one
   Ethernet station with another.

   Ethernet OAM has three functional objectives which are detailed in
   the following sections.

3.1 Remote fault indication

   Remote fault indication provides a mechanism for one end of an
   Ethernet link to signal the other end that the receive path is non
   operational.  Some Ethernet physical layers offer mechanisms to
   signal this condition at the physical layer.  Ethernet OAM added a
   mechanism so that some Ethernet physical layers can operate in
   unidirectional mode, allowing frames to be transmitted in one
   direction even when the other direction is non-operational.
   Traditionally, Ethernet PHYs do not allow frame transmission in one
   direction if the other direction is not operational.  Using this
   mode, Ethernet OAM allows frame-based signaling of remote fault
   conditions while still not allowing higher layer applications to be
   aware of the unidirectional capability.  This document includes
   mechanisms for capturing that information and reflecting such
   information in objects and notifications into the SNMP management
   framework.

3.2 Link monitoring

   Ethernet OAM includes event signaling capability so that one end of
   an Ethernet link can indicate the occurrence of certain important
   events to the other end of the link.  This happens via a layer two
   protocol.  This document defines methods for incorporating the
   occurrence of these layer two events, both at the local end and far
   end of the link, into the SNMP management framework.

   Ethernet OAM also includes mechanisms for one Ethernet station to
   query another directly connected Ethernet station about the status of
   its Ethernet interface variables and status.  This document DOES NOT
   include mechanisms for controlling how one Ethernet endpoint may use
   this functionality to query the status or statistics of a peer
   Ethernet entity.

3.3 Remote loopback

   Remote loopback is a link state where the peer Ethernet entity echoes
   every received packet (without modifications) back onto the link.
   Remote loopback is intrusive in that the other end of the link is not
   forwarding traffic from higher layers out over the link.  This


M. Squire              Expires - December 2004               [Page 4]


                             EFM OAM MIB                    June 2004


   document defines objects controlling loopback operation and reading
   the status of the loopback state.


4. Relation to the Other MIBs

   The definitions presented here are based on Clauses 30 and 57 of
   [802.3ah].  Note that these clauses describe many of these variables
   and their affects on the MAC layer.  In some cases there is a one-to
   one relationship between an object in this document and an object in
   the Clause 30 MIB of [802.3ah].  In other cases, the objects of this
   document reflect a more complex entity and are reflected by more than
   one objectx in the Clause 30 MIB of [802.3ah].

4.1 Relation to other SNMP MIBs

   This objects defined in this document do not overlap with MIB-2
   [RFC1213], the interfaces MIB [RFC2863], or the Ethernet-like
   interfaces MIB [RFC3635].  The objects defined here are defined for
   Ethernet-like interfaces only and use the same ifIndex as the
   associated Ethernet interface.

   This document is independent of the other MIBs derived from [802.3ah]
   for copper [802.3ah-copper] and EPON [802.3ah-epon].

4.2 IANA Considerations

   The EFM OAM MIB requires the allocation of a single object identifier
   for its MODULE-IDENTITY under the MIB-2 tree.  IANA has not yet
   allocated this object identifier.

4.3 Mapping of IEEE 802.3ah Managed Objects

   This section contains the mapping between managed objects defined in
   [802.3ah] Clause 30, and managed objects defined in this document.

   IEEE 802.3 Managed Object        Corresponding SNMP object

    .aOAMID                         IF-MIB ifIndex
    .aOAMAdminState                 dot3OamAdminState
    .aOAMMode                       dot3OamMode
    .aOAMDiscoveryState             dot3OamOperStatus
    .aOAMRemoteMACAddress           dot3OamPeerMacAddress
    .aOAMLocalConfiguration         dot3OamFunctionsSupported
    .aOAMRemoteConfiguration        dot3OamPeerFunctionsSupported,
                                    dot3OamPeerMode
    .aOAMLocalPDUConfiguration      dot3OamMaxOamPduSize
    .aOAMRemotePDUConfiguration     dot3OamPeerMaxOamPduSize
    .aOAMLocalFlagsField            dot3OamOperStatus,


M. Squire              Expires - December 2004               [Page 5]


                             EFM OAM MIB                    June 2004


                                    dot3OamLclErrEventFlagsData
    .aOAMRemoteFlagsField           dot3OamOperStatus,
                                    dot3OamRmtErrEventFlagsData
    .aOAMLocalRevision              dot3OamConfigRevision
    .aOAMRemoteRevision             dot3OamPeerConfigRevision
    .aOAMLocalState                 dot3OamLoopbackStatus
    .aOAMRemoteState                dot3OamLoopbackStatus
    .aOAMRemoteVendorOUI            dot3OamPeerVendorOui
    .aOAMRemoteVendorSpecificInfo   dot3OamPeerVendorInfo

    .aOAMUnsupportedCodesTx         dot3OamUnsupportedCodesTx
    .aOAMUnsupportedCodesRx         dot3OamUnsupportedCodesRx
    .aOAMInformationTx              dot3OamInformationTx
    .aOAMInformationRx              dot3OamInformationRx
    .aOAMUniqueEventNotificationTx  dot3OamUniqueEventNotificationTx
    .aOAMUniqueEventNotificationRx  dot3OamUniqueEventNotificationRx
    .aOAMDuplicateEventNotificationTx
                                    dot3OamDuplicateEventNotificationTx
    .aOAMDuplicateEventNotificationRx
                                    dot3OamDuplicateEventNotificationRx
    .aOAMLoopbackControlTx          dot3OamLoopbackControlTx
    .aOAMLoopbackControlRx          dot3OamLoopbackControlRx
    .aOAMVariableRequestTx          dot3OamVariableRequestTx
    .aOAMVariableRequestRx          dot3OamVariableRequestRx
    .aOAMVariableResponseTx         dot3OamVariableResponseTx
    .aOAMVariableResponseRx         dot3OamVariableResponseRx
    .aOAMOrganizationSpecificTx     dot3OamOrgSpecificTx
    .aOAMOrganizationSpecificRx     dot3OamOrgSpecificTx

    .aOAMLocalErrSymPeriodConfig    dot3OamErrSymPeriodWindow,
                                    dot3OamErrSymPeriodThreshold
    .aOAMLocalErrSymPeriodEvent     dot3OamLclErrSymPeriodData
    .aOAMLocalErrFrameConfig        dot3OamErrFrameWindow,
                                    dot3OamErrFrameThreshold
    .aOAMLocalErrFrameEvent         dot3OamLclErrFrameData
    .aOAMLocalErrFramePeriodConfig  dot3OamErrFramePeriodWindow,
                                    dot3OamErrFramePeriodThreshold
    .aOAMLocalErrFramePeriodEvent   dot3OamLclErrFramePeriodData
    .aOAMLocalErrFrameSecsSummaryConfig
                                    dot3OamErrFrameSecsSummaryWindow,
                                    dot3OamErrFrameSecssummaryThreshold

    .aOAMLocalErrFrameSecsSummaryEvent
                                    dot3OamLclErrFrameSecsSumData
    .aOAMRemoteErrSymPeriodEvent    dot3OamRmtErrSymPeriodData
    .aOAMRemoteErrFrameEvent        dot3OamRmtErrFrameData
    .aOAMRemoteErrFramePeriodEvent  dot3OamRmtErrFramePeriodData
    .aOAMRemoteErrFrameSecsSummaryEvent
                                    dot3OamRmtErrFrameSecsSumData


M. Squire              Expires - December 2004               [Page 6]


                             EFM OAM MIB                    June 2004


    .aFramesLostDueToOAmError
    .acOAmAdminControl              dot3OamFramesLostDueToOam

   There are no IEEE 802.3ah managed objects that are not reflected in
   this MIB in some way.


5. MIB Structure

   The common EFM MIB objects of this memo focus on the OAM capabilities
   introduced in IEEE 802.3ah.  The MIB objects are partitioned into
   four (4) different MIB groups.

   The dot3OamTable group manages the primary OAM objects of the
   Ethernet interface.  This group controls the state and status of OAM
   as well as the mode in which it operates.
   The dot3OamStats table maintains statistics on the number and type of
   Ethernet OAM frames being transmitted and received on the Ethernet
   interface.

   The dot3OamPeer table maintains the current information on the status
   and configuration of the peer OAM entity on the Ethernet interface.
   Managed information includes the capabilities and function available
   on the peer OAM entity.

   The dot3OamEvent table defines the management objects for the event
   notification capability available in IEEE P802.3ah OAM.  With IEEE
   P802.3ah OAM, one device may send notifications to its peer devices
   whenever an important event happens on the local device.


6. MIB Definition




   EFM-COMMON-MIB DEFINITIONS ::= BEGIN
    IMPORTS
      MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32, Unsigned32,
        Integer32, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
      TEXTUAL-CONVENTION, RowStatus, MacAddress, TimeStamp
        FROM SNMPv2-TC
      ifIndex
        FROM IF-MIB
      MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF;




M. Squire              Expires - December 2004               [Page 7]


                             EFM OAM MIB                    June 2004


      efmOamMIB MODULE-IDENTITY
        LAST-UPDATED "200406010000Z"  -- June 01, 2004"
        ORGANIZATION
          "IETF Ethernet Interfaces and Hub MIB Working Group"
        CONTACT-INFO
          "WG Charter:
            http://www.ietf.org/html.charters/hubmib-charter.html
          Mailing lists:
            General Discussion: hubmib@ietf.org
            To Subscribe: hubmib-requests@ietf.org
            In Body: subscribe your_email_address
          Chair: Dan Romascanu, Avaya
            Tel:  +972-3-645-8414
            Email: dromasca@avaya.com
          Editor: Matt Squire
            Hatteras Networks
            Tel:    +1-919-991-5460
            Fax:    +1-919-991-0743
            E-mail: msquire@hatterasnetworks.com
          "
        DESCRIPTION
          "The MIB module for managing the new Ethernet OAM features
          introduced by the Ethernet in the First Mile task force (IEEE
          P802.3ah).  The functionality presented here is based on IEEE
          P802.3ah/D3.3 [802.3ah], released in April, 2004.

          In particular, this MIB focused on the changes to Clause 30 of
          the draft that are not specific to any physical layer.  These
          changes are primarily reflected in the new OAM features
          developed under this project, that can be applied to any
          Ethernet like interface. The OAM features are described in
          Clause 57 of [802.3ah].

          The following reference is used throughout this MIB module:

            [802.3ah] refers to:
              IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
              Information technology - Telecommunications and
              information exchange between systems - Local and
              metropolitan are networks - Specific requirements - Part
              3: Carrier sense multiple access with collision detection
              (CSMA/CD) access method and physical layer specifications
              - Media Access Control Parameters, Physical Layers and
              Management Parameters for subscriber access networks',
              April 2004.
   -- Editor's note - update this to normative reference when finalized

            [802-2001] refers to:
              'IEEE Standard for LAN/MAN (Local Area


M. Squire              Expires - December 2004               [Page 8]


                             EFM OAM MIB                    June 2004


              Network/Metropolitan Area Network): Overview and
              Architecture', IEEE 802, June 2001.

          Copyright (c) The Internet Society (2004). This version of
          this MIB module is part of RFC XXXX; See the RFC itself for
          full legal notices. "
   -- RFC Editor: Update XXXX to appropriate RFC number
   -- RFC Editor: Remove these notes


        REVISION    "200406010000Z"  -- June 01, 2004"
        DESCRIPTION "Initial version, published as RFC XXXX."
   -- RFC Editor: Update XXXX to appropriate RFC number
   -- RFC Editor: Remove these notes

         ::= { mib-2 XXX }
   -- RFC Editor: Replace value with IANA assigned number
   -- RFC Editor: Remove these notes


      --
      -- Sections of the EFM OAM MIB
      --
         dot3OamMIB         OBJECT IDENTIFIER ::= { efmOamMIB 1 }
         dot3OamConformance OBJECT IDENTIFIER ::= { efmOamMIB 2 }


      --
      -- Textual conventions for OAM MIB
      --
      Dot3Oui ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
          "24-bit Organizationally Unique Identifier.  Information on
          OUIs can be found in IEEE 802-2001 [802-2001] Clause 9."
        SYNTAX       OCTET STRING(SIZE(3))

      Dot3OamUnsigned64 ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
          "This convention represents a 64 bit unsigned integer.  The
          convention replaces the Counter64 type for objects requiring
          read-write access."
       SYNTAX          OCTET STRING ( SIZE(8) )

      Dot3OamEventTLVData ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
          "This convention represents the fields in an Event TLV in an


M. Squire              Expires - December 2004               [Page 9]


                             EFM OAM MIB                    June 2004


          Event Notification OAMPDU. The datas is interpreted as a
          sequence of six integer fields. Some fields are longer than is
          required for specific TLVs, but since this convention will be
          shared between all TLVs, the maximum size field is used.

          In the list below, TYPE indicates one of Symbol, Frame, Frame
          Period or Frame Seconds Summary.  See [802.3ah], 57.5.3, for
          details.

          - The first field is 16 bit wide, and represents the
            Event Time Stamp field.
          - The second field is 64 bit wide, and represents the
            Errored TYPE Window field.
          - The third field is 64 bit wide, and represents the
            Errored TYPE Threshold field.
          - The fourth field is 64 bit wide, and represents the
            Errored TYPE field.
          - The fifth field is 64 bit wide, and represents the
            Error Running Total field.
          - The sixth field is 32 bit wide, and represents the
            Event Running Total field.

          Each integer field is encoded with the most important byte at
          the lowest number octet. The first integer field starts at
          location 0.

          Values which do not use the whole field width, will be aligned
          to the right, with zeros padded at the start of the field."
        SYNTAX       OCTET STRING ( SIZE (38) )



      ------------------------------------------------------------------
      --
      -- Ethernet OAM Control group
      --


      dot3OamTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Dot3OamEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Primary controls and status for the OAM capabilities of an
          Ethernet like interface.  There will be one row in this table
          for each Ethernet-like interface in the system that supports
          the Ethernet OAM functions defined in [802.3ah]."
        ::= { dot3OamMIB 1 }



M. Squire              Expires - December 2004              [Page 10]


                             EFM OAM MIB                    June 2004


      dot3OamEntry OBJECT-TYPE
        SYNTAX     Dot3OamEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
          "An entry in the table, containing information on the Ethernet
          OAM function for a single Ethernet-like interface."
        INDEX       { ifIndex }
        ::= { dot3OamTable 1 }

      Dot3OamEntry ::=
        SEQUENCE {
          dot3OamRowStatus                   RowStatus,
          dot3OamAdminState                  INTEGER,
          dot3OamOperStatus                  INTEGER,
          dot3OamMode                        INTEGER,
          dot3OamMaxOamPduSize               Integer32,
          dot3OamConfigRevision              Unsigned32,
          dot3OamFunctionsSupported          BITS
        }

      dot3OamRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
          "Row creation is automatic for each Ethernet- like interface
          that supports OAM functionality as defined in [802.3ah].

          Note that implementation of OAM is not required for any
          Ethernet like interface.  "
        REFERENCE   "[802.3ah], 57.1.2 point d.1"
        ::= { dot3OamEntry 1}

      dot3OamAdminState OBJECT-TYPE
        SYNTAX      INTEGER {
                      disabled(1),
                      enabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This object is used to provision the default administrative
          OAM mode for this interface.  This object represents the
          desired state of OAM for this interface.

          The dot3OamAdminState always starts in the disabled(1) state
          until an explicity management action or configuration
          information retained by the system causes a transition to the


M. Squire              Expires - December 2004              [Page 11]


                             EFM OAM MIB                    June 2004


          enabled(2) state.

          Note that the value of this object is ignored when the
          interface is not operating in full-duplex mode. OAM is not
          supported on half-duplex links.  "
        REFERENCE   "[802.3ah], 30.3.6.1.2"
        ::= { dot3OamEntry 2 }

      dot3OamOperStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                      disabled(1),
                      linkfault(2),
                      passiveWait(3),
                      activeSendLocal(4),
                      sendLocalAndRemote(5),
                      sendLocalAndRemoteOk(6),
                      oamPeeringLocallyRejected(7),
                      oamPeeringRemotelyRejected(8),
                      operational(9)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "At initialization and failure conditions, two OAM entities on
          the same full-duplex Ethernet link begin a discovery phase to
          determine what OAM capabilities may be used on that link.  The
          progress of this initialization is controlled by the OAM
          sublayer.

          This value is always disabled(1) if OAM is disabled on this
          interface via the dot3OamAdminState.

          If the link has detected a fault and is transmitting OAMPDUs
          with a link fault indication, the value is linkFault(2).

          The passiveWait(3) state is returned only by OAM entities in
          passive mode (dot3OamMode) and reflects the state in which the
          OAM entity is waiting to see if the peer device is OAM
          capable.  The activeSendLocal(4) is used by active mode
          devices (dot3OamMode) and reflects the OAM entity actively
          trying to discover whether the peer has OAM capability but has
          not yet made that determination.

          The state sendLocalAndRemote(5) reflects that the local OAM
          entity has discovered the peer but has not yet accepted or
          rejected the configuration of the peer.  The local device can,
          for whatever reason, decide that the peer device is
          unacceptable and decline OAM peering.  If the local OAM entity
          rejects the peer OAM entity, the state becomes


M. Squire              Expires - December 2004              [Page 12]


                             EFM OAM MIB                    June 2004


          oamPeeringLocallyRejected(7).  If the OAM peering is allowed
          by the local device, the state moves to
          sendLocalAndRemoteOk(6).  Note that both the
          sendLocalAndRemote(5) and oamPeeringLocallyRejected(7) states
          fall within the state SEND_LOCAL_REMOTE of the Discovery state
          diagram [802.3ah, Figure 57-5], with the difference being
          whether the local OAM client has actively rejected the peering
          or has just not indicated any decision yet.  Whether a peering
          decision has been made is indicated via the local flags field
          in the OAMPDU (reflected in the aOAMLocalFlagsField of
          30.3.6.1.10).

          If the remote OAM entity rejects the peering, the state
          becomes oamPeeringRemotelyRejected(8).  Note that both the
          sendLocalAndRemoteOk(6) and oamPeeringRemotelyRejected(8)
          states fall within the state SEND_LOCAL_REMOTE_OK of the
          Discovery state diagram [802.3ah, Figure 57-5], with the
          difference being whether the remote OAM client has rejected
          the peering or has just not yet decided.  This is indicated
          via the remote flags field in the OAM PDU (reflected in the
          aOAMRemoteFlagsField of 30.3.6.1.11).

          When the local OAM entity learns that both it and the remote
          OAM entity have accepted the peering, the state moves to
          operational(9) corresponding to the SEND_ANY state of the
          Discovery state diagram [802.3ah, Figure 57-5].  "
        REFERENCE   "[802.3ah], 30.3.6.1.4, 30.3.6.1.10, 30.3.6.1.11"
        ::= { dot3OamEntry 3 }

      dot3OamMode OBJECT-TYPE
        SYNTAX      INTEGER {
                      active(1),
                      passive(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This object configures the mode of OAM operation for this
          Ethernet like interface.  OAM on Ethernet interfaces may be in
          'active' mode or 'passive' mode.  These two modes differ in
          that active mode provides additional capabilities to initiate
          monitoring activities with the remote OAM peer entity, while
          passive mode generally waits for the peer to initiate OAM
          actions with it.  As an example, an active OAM entity can put
          the remote OAM entity in a loopback state, where a passive OAM
          entity cannot.

          Changing this value results in incrementing the configuration
          revision field of locally generated OAMPDUs (30.3.6.1.12) and


M. Squire              Expires - December 2004              [Page 13]


                             EFM OAM MIB                    June 2004


          potentially re-doing the OAM discovery process if the
          dot3OamOperStatus was already operational(9).  "
        REFERENCE   "[802.3ah], 30.3.6.1.3"
        ::= { dot3OamEntry 4 }

      dot3OamMaxOamPduSize OBJECT-TYPE
        SYNTAX      Integer32 (64..1522)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The largest OAMPDU that the OAM entity supports.  OAM
          entities exchange maximum OAMPDU sizes and negotiate to use
          the smaller of the two maximum OAMPDU sizes between the peers.
          "
        REFERENCE   "[802.3ah], REFERENCE 30.3.6.1.8"
        ::= { dot3OamEntry 5 }

      dot3OamConfigRevision OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The configuration revision of the OAM entity as reflected in
          the latest OAMPDU sent by the OAM entity.  The config revision
          is used by OAM entities to indicate configuration changes have
          occured which might require the peer OAM entity to re-evaluate
          whether the peering is allowed.  See local_satisfied in
          [802.3ah, 57.3.1.2].  "
        REFERENCE   "[802.3ah], 30.3.6.1.12"
        ::= { dot3OamEntry 6 }

      dot3OamFunctionsSupported OBJECT-TYPE
        SYNTAX      BITS {
                      unidirectionalSupport (0),
                      loopbackSupport(1),
                      eventSupport(2),
                      variableSupport(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The OAM functions supported on this Ethernet- like interface.
          OAM consists of separate functional sets beyond the basic
          discovery process which is always required.  These functional
          groups can be supported independently by any implementation.
          These values are communicated to the peer via the local
          configuration field of Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.6"
        ::= { dot3OamEntry 7 }


M. Squire              Expires - December 2004              [Page 14]


                             EFM OAM MIB                    June 2004




      ------------------------------------------------------------------
      --
      -- Ethernet OAM Peer group
      --


      dot3OamPeerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Dot3OamPeerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Information about the OAM peer for a particular Ethernet like
          interface. OAM entities communicate with a single OAM peer
          entity on full-duplex Ethernet links on which OAM is enabled
          and operating properly.  "
        ::= { dot3OamMIB 2 }

      dot3OamPeerEntry OBJECT-TYPE
        SYNTAX      Dot3OamPeerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An entry in the table, containing information on the peer OAM
          entity for a single Ethernet like interface.

          Note that there is at most one OAM peer for each Ethernet like
          interface.  "
        INDEX       { ifIndex }
        ::= { dot3OamPeerTable 1 }


      Dot3OamPeerEntry ::=
        SEQUENCE {
          dot3OamPeerRowStatus                RowStatus,
          dot3OamPeerMacAddress               MacAddress,
          dot3OamPeerVendorOui                Dot3Oui,
          dot3OamPeerVendorInfo               Unsigned32,
          dot3OamPeerMode                     INTEGER,
          dot3OamPeerMaxOamPduSize            Integer32,
          dot3OamPeerConfigRevision           Unsigned32,
          dot3OamPeerFunctionsSupported       BITS
        }

      dot3OamPeerRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current


M. Squire              Expires - December 2004              [Page 15]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "The peer row is automatically created when the
          dot3OamOperStatus of this particular Ethernet interface is not
          'disabled', 'linkFault', 'passiveWait' or 'activeSendLocal'.
          In such cases, the remote OAM entity has been identified and
          its information and status can be made available.

          This row is automatically deleted if the dot3OamOperStatus
          changes to 'disabled', 'linkfault', 'passiveWait', or
          'activeSendLocal'.  "
        REFERENCE   "N/A"
        ::= { dot3OamPeerEntry 1}

      dot3OamPeerMacAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The MAC address of the peer OAM entity.  The MAC address is
          derived from the most recently received OAMPDU.

          An OAMPDU is indicated by a valid frame with (1) destination
          MAC address equal to that of the reserved MAC address for Slow
          Protocols (See 43B of [802.3ah]), (2) a lengthOrType field
          equal to the reserved type for Slow Protocols, (3) and a Slow
          Protocols subtype equal to that of the subtype reserved for
          OAM.  "
        REFERENCE   "[802.3ah], 30.3.6.1.5."
        ::= { dot3OamPeerEntry 2 }


      dot3OamPeerVendorOui OBJECT-TYPE
        SYNTAX      Dot3Oui
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The OUI of the OAM peer as reflected in the latest
          Information OAMPDU received with a Local Information TLV.  The
          OUI can be used to identify the vendor of the remote OAM
          entity.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, (4) a OAM code that equals the code
          reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.16."


M. Squire              Expires - December 2004              [Page 16]


                             EFM OAM MIB                    June 2004


        ::= { dot3OamPeerEntry 3 }


      dot3OamPeerVendorInfo OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The Vendor Info of the OAM peer as reflected in the latest
          Information OAMPDU received with a Local Information TLV.  The
          vendor information field is within the Local Information TLV,
          and can be used to determine additional information about the
          peer entity.  The format of the vendor information is
          unspecified within the 32-bit field.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) a OAM code that equals the
          code reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.17."
        ::= { dot3OamPeerEntry 4 }


      dot3OamPeerMode OBJECT-TYPE
        SYNTAX      INTEGER {
                      active(1),
                      passive(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The mode of the OAM peer as reflected in the latest
          Information OAMPDU received with a Local Information TLV.  The
          mode of the peer can be determined from the Configuration
          field in the Local Information TLV of the last Information
          OAMPDU received from the peer.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) a OAM code that equals the
          code reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.7."
        ::= { dot3OamPeerEntry 5 }


M. Squire              Expires - December 2004              [Page 17]


                             EFM OAM MIB                    June 2004



      dot3OamPeerMaxOamPduSize OBJECT-TYPE
        SYNTAX      Integer32 (64..1522)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The maximum size of OAMPDU supported by the peer as reflected
          in the latest Information OAMPDU received with a Local
          Information TLV.   Ethernet OAM on this interface must not use
          OAMPDUs that exceed this size.  The maximum OAMPDU size can be
          determined from the PDU Configuration field of the Local
          Information TLV of the last Information OAMPDU received from
          the peer.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) a OAM code that equals the
          code reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.9."
        ::= { dot3OamPeerEntry 6 }


      dot3OamPeerConfigRevision OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The configuration revision of the OAM peer as reflected in
          the latest OAMPDU.  This attribute is changed by the peer
          whenever it has a local configuration change for Ethernet OAM
          this interface.

          The configuration revision can be determined from the Revision
          field of the Local Information TLV of the most recently
          received Information OAMPDU with a Local Information TLV.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) a OAM code that equals the
          code reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], 30.3.6.1.13."
        ::= { dot3OamPeerEntry 7 }



M. Squire              Expires - December 2004              [Page 18]


                             EFM OAM MIB                    June 2004



      dot3OamPeerFunctionsSupported OBJECT-TYPE
        SYNTAX      BITS {
                      unidirectionalSupport (0),
                      loopbackSupport(1),
                      eventSupport(2),
                      variableSupport(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The OAM functions supported on this Ethernet like interface.
          OAM consists of separate functionality sets above the basic
          discovery process.  This value indicates the capabilities of
          the peer OAM entity with respect to these functions.

          The capbilities of the OAM peer can be determined from the
          configuration field of the Local Information TLV of the most
          recently received Information OAMPDU with a Local Information
          TLV.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) a OAM code that equals the
          code reserved for Information OAMPDUs.  "
        REFERENCE   "[802.3ah], REFERENCE 30.3.6.1.7."
        ::= { dot3OamPeerEntry 8 }


      ------------------------------------------------------------------
      --
      -- Ethernet OAM Loopback group
      --


      dot3OamLoopbackTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Dot3OamLoopbackEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "This table contains methods to control the loopback state of
          the local link as well as indicating the status of the
          loopback function.

          Loopback can be used to place the remote OAM entity in a state
          where every received frame (except OAMPDUs) are echoed back


M. Squire              Expires - December 2004              [Page 19]


                             EFM OAM MIB                    June 2004


          over the same interface on which they were received.   In this
          state, at the remote entity, 'normal' traffic is disabled as
          only the looped back frames are transmitted on the interface.
          Loopback is thus an intrusive operation that prohibits normal
          data flow and should be used accordingly.  "
        ::= { dot3OamMIB 3 }

      dot3OamLoopbackEntry OBJECT-TYPE
        SYNTAX      Dot3OamLoopbackEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An entry in the table, containing information on the loopback
          status for a single Ethernet like interface.  There is an
          entry in this table for every Ethernet-like interface on which
          supports OAM and loopback function within OAM (as indicated in
          dot3OamFunctionsSupported).  "
        INDEX       { ifIndex }
        ::= { dot3OamLoopbackTable 1 }

      Dot3OamLoopbackEntry ::=
        SEQUENCE {
          dot3OamLoopbackCommand            INTEGER,
          dot3OamLoopbackStatus             INTEGER,
          dot3OamLoopbackIgnoreRx           INTEGER
        }

      dot3OamLoopbackCommand OBJECT-TYPE
        SYNTAX      INTEGER {
                      noLoopback (1),
                      startRemoteLoopback (2),
                      stopRemoteLoopback (3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This attribute initiates or terminates remote loopback with
          an OAM peer.  Writing startRemoteLoopback(2) to this attribute
          cause the local OAM client to send a loopback OAMPDU to the
          OAM peer with the loopback enable flags set.  Writing
          stopRemoteLoopback(3) to this attribute will cause the local
          OAM client to send a loopback OAMPDU to the OAM peer with the
          loopback enable flags cleared.  Writing noLoopback to this
          attribute has no effect.

          Writes to this attribute are ignored unless the OAM status of
          this interface is 'operational' (dot3OamOperStatus).

          The attribute always returns noLoopback on a read.  To


M. Squire              Expires - December 2004              [Page 20]


                             EFM OAM MIB                    June 2004


          determine the loopback status, use the attribute
          dot3OamLoopbackStatus.  "
        REFERENCE   "[802.3ah], 57.2.11"
        ::= { dot3OamLoopbackEntry 1 }

      dot3OamLoopbackStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                      noLoopback (1),
                      initiatingLoopback (2),
                      remoteLoopback (3),
                      terminatingLoopback (4),
                      localLoopback (5),
                      unknown (6)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The loopback status of the OAM entity.  This status is
          determined by a combination of the local parser and
          multiplexer states, the remote parser and multiplexer states,
          as well as by the actions of the local OAM client.  When
          operating in normal mode with no loopback in progress, the
          status reads noLoopback(1).

          If the OAM client has sent an Loopback OAMPDU and is waiting
          for a response, where the local parser and multiplexer states
          are DISCARD (see [802.3ah, 57.2.11.1]), the status is
          'initiatingLoopback'.  In this case, the local OAM entity has
          yet to receive any acknowledgement that the remote OAM entity
          has received its loopback command request.

          If the local OAM client knows that the remote OAM entity is in
          loopback mode (via the remote state information as described
          in [802.3ah, 57.2.11.1, 30.3.6.1.15]), the status is
          remoteLoopback(3).  If the local OAM client is in the process
          of terminating the remote loopback [802.3ah, 57.2.11.3,
          30.3.6.1.14], with its local multiplexer and parser states in
          DISCARD, the status is terminatingLoopback(4).  If the remote
          OAM client has put the local OAM entity in loopback mode as
          indicated by its local parser state, the status is
          localLoopback(5).

          The unknown(6) status indicates the parser and multiplexer
          combination is unexpected.  This status may be returned if the
          OAM loopback is in a transition state but should not persist.

          The values of this attribute correspond to the following
          values of the local and remote parser and multiplexer states.



M. Squire              Expires - December 2004              [Page 21]


                             EFM OAM MIB                    June 2004


            value            LclPrsr   LclMux    RmtPrsr   RmtMux
            noLoopback         FWD       FWD       FWD       FWD
            initLoopback     DISCARD   DISCARD     FWD       FWD
            rmtLoopback      DISCARD     FWD      LPBK    DISCARD
            tmtngLoopback    DISCARD   DISCARD    LPBK    DISCARD
            lclLoopback        LPBK    DISCARD   DISCARD     FWD
            unknown            ***   any other combination   ***
          "
        REFERENCE   "[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
          30.3.6.1.15"
        ::= { dot3OamLoopbackEntry 2 }

      dot3OamLoopbackIgnoreRx OBJECT-TYPE
        SYNTAX      INTEGER { ignore(1), process(2) }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "Since OAM loopback is a distruptive operation (user traffic
          does not pass), this attribute provides a mechanism to provide
          controls over whether received OAM loopback commands are
          processed or ignored.  When the value is ignore(1), received
          loopback commands are ignored.  When the value is process(2),
          OAM loopback commands are processed.  The default value is to
          ignore loopback commands.

          The attribute has no meaning if the local OAM entity does not
          support the loopback function (as defined in
          dot3OamFunctionsSupported).  "
        REFERENCE   "[802.3ah], REFERENCE 57.2.11, 30.3.61.14,
          30.3.6.1.15"
        ::= { dot3OamLoopbackEntry 3 }


      ------------------------------------------------------------------
      --
      -- Ethernet OAM Statistics group
      --


      dot3OamStatsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Dot3OamStatsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Statistics for the OAM function on a particular Ethernet like
          interface."
        ::= { dot3OamMIB 4 }

      dot3OamStatsEntry OBJECT-TYPE


M. Squire              Expires - December 2004              [Page 22]


                             EFM OAM MIB                    June 2004


        SYNTAX      Dot3OamStatsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "An entry in the table, containing statistics information on
          the Ethernet OAM function for a single Ethernet-like
          interface."
        INDEX       { ifIndex }
        ::= { dot3OamStatsTable 1 }

      Dot3OamStatsEntry ::=
        SEQUENCE {
                  dot3OamInformationTx                Counter32,
                  dot3OamInformationRx                Counter32,
                  dot3OamUniqueEventNotificationTx    Counter32,
                  dot3OamUniqueEventNotificationRx    Counter32,
                  dot3OamDuplicateEventNotificationTx Counter32,
                  dot3OamDuplicateEventNotificationRx Counter32,
                  dot3OamLoopbackControlTx            Counter32,
                  dot3OamLoopbackControlRx            Counter32,
                  dot3OamVariableRequestTx            Counter32,
                  dot3OamVariableRequestRx            Counter32,
                  dot3OamVariableResponseTx           Counter32,
                  dot3OamVariableResponseRx           Counter32,
                  dot3OamOrgSpecificTx                Counter32,
                  dot3OamOrgSpecificRx                Counter32,
                  dot3OamUnsupportedCodesTx           Counter32,
                  dot3OamUnsupportedCodesRx           Counter32,
                  dot3OamFramesLostDueToOam           Counter32
                 }


      dot3OamInformationTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Information OAMPDUs transmitted on
          this interface.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Information code.

          Discontinuities of this counter can occur at re-initialization


M. Squire              Expires - December 2004              [Page 23]


                             EFM OAM MIB                    June 2004


          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.20."
        ::= { dot3OamStatsEntry 1 }

      dot3OamInformationRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Information OAMPDUs received on this
          interface.

          An Information OAMPDU is indicated by a valid frame with (1)
          destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Information code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.21."
        ::= { dot3OamStatsEntry 2 }

      dot3OamUniqueEventNotificationTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of unique Event OAMPDUs transmitted on
          this interface.  Event notifications may be sent in duplicate
          to increase the probability of successfully being received,
          given the possiblity that a frame may be lost in transit.

          An Event Notification OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Event code.

          A unique Event Notification OAMPDU is indicated as an Event
          Notification OAMPDU with a Sequence Number field that is
          distinct from the previously transmitted Event Notification
          OAMPDU Sequence Number.


M. Squire              Expires - December 2004              [Page 24]


                             EFM OAM MIB                    June 2004



          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "

        REFERENCE   "[802.3ah], 30.3.6.1.22."
        ::= { dot3OamStatsEntry 3 }

      dot3OamUniqueEventNotificationRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of unique Event OAMPDUs received on
          this interface.  Event notification OAMPDUs may be sent in
          duplicate to increase the probability of successfully being
          received, given the possiblity that a frame may be lost in
          transit.

          An Event Notification OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Event code.

          A unique Event Notification OAMPDU is indicated as an Event
          Notification OAMPDU with a Sequence Number field that is
          distinct from the previously received Event Notification
          OAMPDU Sequence Number.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.24."
        ::= { dot3OamStatsEntry 4 }

      dot3OamDuplicateEventNotificationTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of duplicate Event OAMPDUs transmitted
          on this interface.  Event notification OAMPDUs may be sent in
          duplicate to increase the probability of successfully being
          received, given the possiblity that a frame may be lost in
          transit.



M. Squire              Expires - December 2004              [Page 25]


                             EFM OAM MIB                    June 2004


          An Event Notification OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Event code.

          A duplicate Event Notification OAMPDU is indicated as an Event
          Notification OAMPDU with a Sequence Number field that is
          identical to the previously transmitted Event Notification
          OAMPDU Sequence Number.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.23."
        ::= { dot3OamStatsEntry 5 }

      dot3OamDuplicateEventNotificationRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of duplicate Event OAMPDUs received on
          this interface.  Event notification OAMPDUs may be sent in
          duplicate to increase the probability of successfully being
          received, given the possiblity that a frame may be lost in
          transit.

          An Event Notification OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Event code.

          A duplicate Event Notification OAMPDU is indicated as an Event
          Notification OAMPDU with a Sequence Number field that is
          identical to the previously received Event Notification OAMPDU
          Sequence Number.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.25."
        ::= { dot3OamStatsEntry 6 }



M. Squire              Expires - December 2004              [Page 26]


                             EFM OAM MIB                    June 2004


      dot3OamLoopbackControlTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Loopback Control OAMPDUs transmitted
          on this interface.

          An Loopback Conrol OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Loopback Control code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.26."
        ::= { dot3OamStatsEntry 7 }

      dot3OamLoopbackControlRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Loopback Control OAMPDUs transmitted
          on this interface.

          An Loopback Control OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Loopback Control code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.27."
        ::= { dot3OamStatsEntry 8 }

      dot3OamVariableRequestTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION


M. Squire              Expires - December 2004              [Page 27]


                             EFM OAM MIB                    June 2004


          "A count of the number of Variable Request OAMPDUs transmitted
          on this interface.

          An Variable Request OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Variable Request code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.28."
        ::= { dot3OamStatsEntry 9 }

      dot3OamVariableRequestRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Variable Request OAMPDUs received on
          this interface.

          An Variable Request OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Variable Request code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.29."
        ::= { dot3OamStatsEntry 10 }

      dot3OamVariableResponseTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Variable Response OAMPDUs
          transmitted on this interface.

          An Variable Response OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC


M. Squire              Expires - December 2004              [Page 28]


                             EFM OAM MIB                    June 2004


          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Variable Response code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.30."
        ::= { dot3OamStatsEntry 11 }

      dot3OamVariableResponseRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Variable Response OAMPDUs received
          on this interface.

          An Variable Response OAMPDU is indicated by a valid frame with
          (1) destination MAC address equal to that of the reserved MAC
          address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Variable Response code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.31."
        ::= { dot3OamStatsEntry 12 }

       dot3OamOrgSpecificTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of Organization Specific OAMPDUs
          transmitted on this interface.

          An Organization Specific OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Organization Specific code.


M. Squire              Expires - December 2004              [Page 29]


                             EFM OAM MIB                    June 2004



          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.32."
        ::= { dot3OamStatsEntry 13 }

      dot3OamOrgSpecificRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION

          "A count of the number of Organization Specific OAMPDUs
          received on this interface.

          An Organization Specific OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          OAM Organization Specific code.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.33."
        ::= { dot3OamStatsEntry 14 }

      dot3OamUnsupportedCodesTx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of OAMPDUs transmitted  on this
          interface with an unsupported op-code.

          An unsupported opcode OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          opcode for a function that is not supported by the device.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "


M. Squire              Expires - December 2004              [Page 30]


                             EFM OAM MIB                    June 2004


        REFERENCE   "[802.3ah], 30.3.6.1.18."
        ::= { dot3OamStatsEntry 15 }

      dot3OamUnsupportedCodesRx OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of OAMPDUs received on this interface
          with an unsupported op-code.

          An unsupported opcode OAMPDU is indicated by a valid frame
          with (1) destination MAC address equal to that of the reserved
          MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a
          lengthOrType field equal to the reserved type for Slow
          Protocols, (3) a Slow Protocols subtype equal to that of the
          subtype reserved for OAM, and (4) an OAMPDU code equals the
          opcode for a function that is not supported by the device.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.19."
        ::= { dot3OamStatsEntry 16 }

      dot3OamFramesLostDueToOam OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A count of the number of frames that were dropped by the OAM
          multiplexer.  Since the OAM mulitplexer has multiple inputs
          and a single output, there may be cases where frames are
          dropped due to transmit resource contention.  This counter is
          incremented whenever a frame is dropped by the OAM layer.
          When this counter is incremented, no other counters in this
          MIB are incremented.

          Discontinuities of this counter can occur at re-initialization
          of the management system, and at other times as indicated by
          the value of the ifCounterDiscontinuityTime.  "
        REFERENCE   "[802.3ah], 30.3.6.1.46."
        ::= { dot3OamStatsEntry 17 }


      ------------------------------------------------------------------
      --
      -- Ethernet OAM Event group
      --


M. Squire              Expires - December 2004              [Page 31]


                             EFM OAM MIB                    June 2004




      dot3OamEventConfigTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF Dot3OamEventConfigEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
          "Ethernet OAM includes the ability to generate and receive
          event notifications to indicate various link problems.  This
          table contains the mechanisms to configure the thresholds to
          generate the standard Ethernet OAM events.

          These events are:
            - Errored Symbol Period Event.  Generated when the number of
              symbol errors exceeds a threshold within a given window
              defined by a number of symbols (e.g. 1,000 symbols out of
              1,000,000 had errors).
            - Errored Frame Period Event.  Generated when the number of
              frame errors exceeds a threshold within a given window
              defined by a number of frames (e.g. 10 frames out of 1000
              had errors).
            - Errored Frame Event.  Generated when the number of frame
              errors exceeds a threshold within a given window defined
              by a period of time (e.g. 10 frames in 1 second had
              errors).
            - Errored Frame Seconds Summary Event.  Generated when the
              number of errored frame seconds exceeds a threshold within
              a given time period (e.g. 10 errored frame seconds within
              the last 100 seconds).  An errored frame second is defined
              as a 1 second interval which had >0 frame errors.
          "
        ::= { dot3OamMIB 5 }

      dot3OamEventConfigEntry OBJECT-TYPE
        SYNTAX      Dot3OamEventConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
          "Event configuration information is available for every
          Ethernet like interface that supports OAM and the event
          function of OAM as indicated in the dot3OamFunctionsSupported
          attribute.

          Event configuration controls when the local management entity
          sends Event Notification OAMPDUs to its OAM peer.  "
        INDEX       { ifIndex }
        ::= { dot3OamEventConfigTable 1 }

      Dot3OamEventConfigEntry ::=


M. Squire              Expires - December 2004              [Page 32]


                             EFM OAM MIB                    June 2004


        SEQUENCE {
                  dot3OamErrSymPeriodWindow          Dot3OamUnsigned64,
                  dot3OamErrSymPeriodThreshold       Dot3OamUnsigned64,
                  dot3OamErrSymPeriodEvNotifEnable   INTEGER,
                  dot3OamErrFramePeriodWindow        Unsigned32,
                  dot3OamErrFramePeriodThreshold     Unsigned32,
                  dot3OamErrFramePeriodEvNotifEnable INTEGER,
                  dot3OamErrFrameWindow              Unsigned32,
                  dot3OamErrFrameThreshold           Unsigned32,
                  dot3OamErrFrameEvNotifEnable       INTEGER,
                  dot3OamErrFrameSecsSummaryWindow   Integer32,
                  dot3OamErrFrameSecsSummaryThreshold Integer32,
                  dot3OamErrFrameSecsEvNotifEnable   INTEGER
                }

      dot3OamErrSymPeriodWindow OBJECT-TYPE
        SYNTAX      Dot3OamUnsigned64
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of symbols over which the threshold is defined.

          If dot3OamErrSymPeriodThreshold symbol errors occur within a
          window of dot3OamErrSymPeriodWindow symbols, an Event
          Notification OAMPDU should be generated with an Errored Symbol
          Period Event TLV indicating the threshold has been crossed in
          this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.34"
        ::= { dot3OamEventConfigEntry 1 }

      dot3OamErrSymPeriodThreshold OBJECT-TYPE
        SYNTAX      Dot3OamUnsigned64
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of symbols errors that must occur for this event
          to be triggered.

          If dot3OamErrSymPeriodThreshold symbol errors occur within a
          window of dot3OamErrSymPeriodWindow symbols, an Event
          Notification OAMPDU should be generated with an Errored Symbol
          Period Event TLV indicating the threshold has been crossed in
          this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.34"
        ::= { dot3OamEventConfigEntry 2 }

      dot3OamErrSymPeriodEvNotifEnable OBJECT-TYPE
        SYNTAX      INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS  read-write


M. Squire              Expires - December 2004              [Page 33]


                             EFM OAM MIB                    June 2004


        STATUS      current
        DESCRIPTION
          "Indicates whether the occurence of Errored Symbol Period
          Events should result in Event Notification OAMPDUs generated
          by the OAM layer.

          By default, this object should have the value enabled(1) for
          Ethernet like interfaces that support OAM.  If the OAM layer
          does not support event notifications (as indicated via the
          dot3OamFunctionsSupported attribute), this value is ignored.
          "
        REFERENCE   "N/A"
        ::= { dot3OamEventConfigEntry 3 }

      dot3OamErrFramePeriodWindow OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of frames over which the threshold is defined.

          If dot3OamErrFramePeriodThreshold frame errors occur within a
          window of dot3OamErrFramePeriodWindow frames, an Event
          Notification OAMPDU should be generated with an Errored Frame
          Period Event TLV indicating the threshold has been crossed in
          this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.38"
        ::= { dot3OamEventConfigEntry 4 }

      dot3OamErrFramePeriodThreshold OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of frame errors that must occur for this event to
          be triggered.

          If dot3OamErrFramePeriodThreshold frame errors occur within a
          window of dot3OamErrFramePeriodWindow frames, an Event
          Notification OAMPDU should be generated with an Errored Frame
          Period Event TLV indicating the threshold has been crossed in
          this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.38"
        ::= { dot3OamEventConfigEntry 5 }

      dot3OamErrFramePeriodEvNotifEnable OBJECT-TYPE
        SYNTAX      INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS  read-write
        STATUS      current


M. Squire              Expires - December 2004              [Page 34]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "Indicates whether the occurence of an Errored Frame Period
          Event should result in an Event Notification OAMPDU generated
          by the OAM layer.

          By default, this object should have the value enabled(1) for
          Ethernet like interfaces that support OAM.  If the OAM layer
          does not support event notifications (as indicated via the
          dot3OamFunctionsSupported attribute), this value is ignored. "
        REFERENCE   "N/A"
        ::= { dot3OamEventConfigEntry 6 }

      dot3OamErrFrameWindow OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The amount of time (in 100ms increments) over which the
          threshold is defined.

         If dot3OamErrFrameThreshold frame errors occur within a window
         of dot3OamErrFrameWindow seconds (measured in tenths of
         seconds), an Event Notification OAMPDU should be generated with
         an Errored Frame Event TLV indicating the threshold has been
         crossed in this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.36"
        ::= { dot3OamEventConfigEntry 7 }


      dot3OamErrFrameThreshold OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of frame errors that must occur for this event to
          be triggered.

          If dot3OamErrFrameThreshold frame errors occur within a window
          of dot3OamErrFrameWindow (in tenths of seconds), an Event
          Notification OAMPDU should be generated with an Errored Frame
          Event TLV indicating the threshold has been crossed in this
          window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.36"
        ::= { dot3OamEventConfigEntry 8 }

      dot3OamErrFrameEvNotifEnable OBJECT-TYPE
        SYNTAX      INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS  read-write
        STATUS      current


M. Squire              Expires - December 2004              [Page 35]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "Indicates whether the occurence of an Errored Frame Event
          should result in an Event Notification OAMPDU generated by the
          OAM layer.

          By default, this object should have the value enabled(1) for
          Ethernet like interfaces that support OAM.  If the OAM layer
          does not support event notifications (as indicated via the
          dot3OamFunctionsSupported attribute), this value is ignored. "
        REFERENCE   "N/A"
        ::= { dot3OamEventConfigEntry 9 }

      dot3OamErrFrameSecsSummaryWindow OBJECT-TYPE
        SYNTAX      Integer32 (100..9000)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The amount of time (in 100ms intervals) over which the
          threshold is defined.

          If dot3OamErrFrameSecsSummaryThreshold frame errors occur
          within a window of dot3OamErrFrameSecsSummaryWindow (in tenths
          of seconds), an Event Notification OAMPDU should be generated
          with an Errored Frame Seconds Summary Event TLV indicating the
          threshold has been crossed in this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.40"
        ::= { dot3OamEventConfigEntry 10 }

      dot3OamErrFrameSecsSummaryThreshold OBJECT-TYPE
        SYNTAX      Integer32 (1..900)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "The number of errored frame seconds that must occur for this
          event to be triggered.

          If dot3OamErrFrameSecsSummaryThreshold frame errors occur
          within a window of dot3OamErrFrameSecsSummaryWindow (in tenths
          of seconds), an Event Notification OAMPDU should be generated
          with an Errored Frame Seconds Summary Event TLV indicating the
          threshold has been crossed in this window.  "
        REFERENCE   "[802.3ah], 30.3.6.1.40"
        ::= { dot3OamEventConfigEntry 11 }

      dot3OamErrFrameSecsEvNotifEnable OBJECT-TYPE
        SYNTAX      INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION


M. Squire              Expires - December 2004              [Page 36]


                             EFM OAM MIB                    June 2004


          "Indicates whether the occurence of an Errored Frame Seconds
          Summary Event should result in an Event Notification OAMPDU
          generated by the OAM layer.

          By default, this object should have the value enabled(1) for
          Ethernet like interfaces that support OAM.  If the OAM layer
          does not support event notifications (as indicated via the
          dot3OamFunctionsSupported attribute), this value is ignored."
        REFERENCE   "N/A"
        ::= { dot3OamEventConfigEntry 12 }


      ------------------------------------------------------------------
      --
      -- Ethernet OAM Event Status group
      --

      dot3OamEventStatusTable   OBJECT-TYPE
        SYNTAX       SEQUENCE OF Dot3OamEventStatusEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
          "OAM event status information for a  particular Ethernet-like
          interface. These objects will contain the most recently
          transmitted or received TLV event.

          There is a strict one-to-one relation between entries in this
          table and entries in the dot3OamTable.  "
        ::= { dot3OamMIB 6 }

      dot3OamEventStatusEntry OBJECT-TYPE
        SYNTAX      Dot3OamEventStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the dot3OamEventStatusTable."
        INDEX       { ifIndex }
        ::= { dot3OamEventStatusTable 1 }

      Dot3OamEventStatusEntry ::=
        SEQUENCE {
          -- Local events
          dot3OamLclErrSymPeriodTime          TimeStamp,
          dot3OamLclErrSymPeriodData          Dot3OamEventTLVData,
          dot3OamLclErrFramePeriodTime        TimeStamp,
          dot3OamLclErrFramePeriodData        Dot3OamEventTLVData,
          dot3OamLclErrFrameTime              TimeStamp,
          dot3OamLclErrFrameData              Dot3OamEventTLVData,
          dot3OamLclErrFrameSecsSumTime       TimeStamp,
          dot3OamLclErrFrameSecsSumData       Dot3OamEventTLVData,


M. Squire              Expires - December 2004              [Page 37]


                             EFM OAM MIB                    June 2004


          dot3OamLclErrEventFlagsTime         TimeStamp,
          dot3OamLclErrEventFlagsData         BITS,
          dot3OamLclErrEventOtherTime         TimeStamp,
          dot3OamLclErrEventOtherData         OCTET STRING,

          -- Remote events
          dot3OamRmtErrSymPeriodTime          TimeStamp,
          dot3OamRmtErrSymPeriodData          Dot3OamEventTLVData,
          dot3OamRmtErrFramePeriodTime        TimeStamp,
          dot3OamRmtErrFramePeriodData        Dot3OamEventTLVData,
          dot3OamRmtErrFrameTime              TimeStamp,
          dot3OamRmtErrFrameData              Dot3OamEventTLVData,
          dot3OamRmtErrFrameSecsSumTime       TimeStamp,
          dot3OamRmtErrFrameSecsSumData       Dot3OamEventTLVData,
          dot3OamRmtErrEventFlagsTime         TimeStamp,
          dot3OamRmtErrEventFlagsData         BITS,
          dot3OamRmtErrEventOtherTime         TimeStamp,
          dot3OamRmtErrEventOtherData         OCTET STRING
        }


      dot3OamLclErrSymPeriodTime       OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Symbol Period Event
          occurred locally.  "
        REFERENCE   "[802.3ah], 30.3.6.1.35 and 57.5.3.1."
        ::= { dot3OamEventStatusEntry 1 }

      dot3OamLclErrSymPeriodData  OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently transmitted Errored Symbol Period
          Event TLV in an Event Notification OAMPDU.  "
        REFERENCE   "[802.3ah], 30.3.6.1.35 and 57.5.3.1."
        ::= { dot3OamEventStatusEntry 2 }

      dot3OamLclErrFramePeriodTime      OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame Period Event
          occurred locally.  "


M. Squire              Expires - December 2004              [Page 38]


                             EFM OAM MIB                    June 2004


        REFERENCE   "[802.3ah], 30.3.6.1.39 and 57.5.3.3."
        ::= { dot3OamEventStatusEntry 3 }

      dot3OamLclErrFramePeriodData OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently transmitted Errored Frame Period
          Event TLV in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.39 and 57.5.3.3."
        ::= { dot3OamEventStatusEntry 4 }

      dot3OamLclErrFrameTime      OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame Event occurred
          locally.  "
        REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
        ::= { dot3OamEventStatusEntry 5 }

      dot3OamLclErrFrameData  OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently transmitted Errored Frame Event
          TLV in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.37 and 57.5.3.2."
        ::= { dot3OamEventStatusEntry 6 }

      dot3OamLclErrFrameSecsSumTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame Seconds Summary
          Event occurred locally.  "
        REFERENCE   "[802.3ah], 30.3.6.1.36 and 57.5.3.4."
        ::= { dot3OamEventStatusEntry 7 }

      dot3OamLclErrFrameSecsSumData OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current


M. Squire              Expires - December 2004              [Page 39]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently transmitted Errored Frame Seconds
          Summary Event TLV in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.36 and 57.5.3.4."
        ::= { dot3OamEventStatusEntry 8 }

      dot3OamLclErrEventFlagsTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the flag field in outgoing OAMPDUs changed.
          "
        REFERENCE   "[802.3ah], 30.3.6.1.10"
        ::= { dot3OamEventStatusEntry 9 }

      dot3OamLclErrEventFlagsData OBJECT-TYPE
        SYNTAX      BITS {
                      linkFault (0),
                      dyingGasp(1),
                      miscCritical(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The value of the OAM event flags on the most recently
          generated OAMPDU.  These flags are used to signal critical
          events to an OAM peer entity.  "
        REFERENCE   "[802.3ah], 30.3.6.1.10"
        ::= { dot3OamEventStatusEntry 10 }

      dot3OamLclErrEventOtherTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last non-802.3 define link event
          occurred.

          The 802.3ah OAM protocol allows for organization specific
          events to be defined by any organization.  Whenever a
          non-802.3 defined link event occurs, this timestamp is updated
          to reflect that occurrence.  "
        REFERENCE   "[802.3ah], 57.5.3.5"
        ::= { dot3OamEventStatusEntry 11 }

      dot3OamLclErrEventOtherData OBJECT-TYPE
        SYNTAX      OCTET STRING ( SIZE(3..255) )


M. Squire              Expires - December 2004              [Page 40]


                             EFM OAM MIB                    June 2004


        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The value of the data field for the most recent Organization
          Specific link event occuring on the interface.  The
          information syntax is defined by the vendor specified in the
          OUI field (the first 3 octets) of the data.  "
        REFERENCE   "[802.3ah], 57.5.3.5"
        ::= { dot3OamEventStatusEntry 12 }

      dot3OamRmtErrSymPeriodTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Symbol Period TLV was
          received in a unique Event Notification OAMPDU, indicating
          receipt of a notification about a remote Errored Symbol Period
          Event.  "
        REFERENCE   "[802.3ah], 30.3.6.1.42 and 57.5.3.1."
        ::= { dot3OamEventStatusEntry 13 }

      dot3OamRmtErrSymPeriodData  OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently received Errored Symbol Period
          Event TLV in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.42 and 57.5.3.1."
        ::= { dot3OamEventStatusEntry 14 }

      dot3OamRmtErrFramePeriodTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame Period TLV was
          received in a unique Event Notification OAMPDU, indicating
          receipt of a notification about a remote Errored Frame Period
          Event.  "
        REFERENCE   "[802.3ah], 30.3.6.1.44 and 57.5.3.3."
        ::= { dot3OamEventStatusEntry 15 }

      dot3OamRmtErrFramePeriodData OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current


M. Squire              Expires - December 2004              [Page 41]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently received Errored Frame Period
          Event TLV in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.44 and 57.5.3.3."
        ::= { dot3OamEventStatusEntry 16 }

      dot3OamRmtErrFrameTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame TLV was received in
          a unique Event Notification OAMPDU, indicating receipt of a
          notification about a remote Errored Frame Event.  "
        REFERENCE   "[802.3ah], 30.3.6.1.43 and 57.5.3.2."
        ::= { dot3OamEventStatusEntry 17 }

      dot3OamRmtErrFrameData  OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently received Errored Frame Event TLV
          in an Event Notification OAMPDU."
        REFERENCE   "[802.3ah], 30.3.6.1.43 and 57.5.3.2."
        ::= { dot3OamEventStatusEntry 18 }

      dot3OamRmtErrFrameSecsSumTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last Errored Frame Seconds Summary TLV
          was received in a unique Event Notification OAMPDU, indicating
          receipt of a notification about a remote Errored Frame Seconds
          Summary Event.  "
        REFERENCE   "[802.3ah], 30.3.6.1.45 and 57.5.3.4."
        ::= { dot3OamEventStatusEntry 19 }

      dot3OamRmtErrFrameSecsSumData OBJECT-TYPE
        SYNTAX      Dot3OamEventTLVData
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "A sequence of six integers corresponding to the respective
          fields in the most recently received Errored Frame Seconds
          Summary Event TLV in an Event Notification OAMPDU."


M. Squire              Expires - December 2004              [Page 42]


                             EFM OAM MIB                    June 2004


        REFERENCE   "[802.3ah], 30.3.6.1.45 and 57.5.3.4."
        ::= { dot3OamEventStatusEntry 20 }

      dot3OamRmtErrEventFlagsTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the flags field in incoming OAMPDUs last
          changed.
          "
        REFERENCE   "[802.3ah], 30.3.6.1.10"
        ::= { dot3OamEventStatusEntry 21 }

      dot3OamRmtErrEventFlagsData OBJECT-TYPE
        SYNTAX      BITS {
                      linkFault (0),
                      dyingGasp(1),
                      miscCritical(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The value of the OAM event flags on the most recently
          received OAMPDU.  These flags are used to signal critical
          events to an OAM peer entity.  "
        REFERENCE   "[802.3ah], 30.3.6.1.10"
        ::= { dot3OamEventStatusEntry 22 }

      dot3OamRmtErrEventOtherTime  OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
          "The time at which the last non-802.3 defined link event
          TLV was received.

          The 802.3ah OAM protocol allows for organization specific
          events to be defined by any organization.  Whenever an
          Organization Specific Link Event TLV is received in a Event
          OAMPDU, this timestamp is updated to reflect the occurrence."
        REFERENCE   "[802.3ah], 57.5.3.5"
        ::= { dot3OamEventStatusEntry 23 }

      dot3OamRmtErrEventOtherData OBJECT-TYPE
        SYNTAX      OCTET STRING ( SIZE(3..255) )
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION


M. Squire              Expires - December 2004              [Page 43]


                             EFM OAM MIB                    June 2004


          "The value of the data field for the most recent Organization
          Specific Link Event TLV received on the interface.  The
          information syntax is defined by the vendor specified in the
          OUI field (the first 3 octets) of the data.  "
        REFERENCE   "[802.3ah], 57.5.3.5"
        ::= { dot3OamEventStatusEntry 24 }


      ------------------------------------------------------------------
      --
      -- Ethernet OAM Notifications
      --

      dot3OamTraps OBJECT IDENTIFIER ::= { dot3OamMIB 7 }
      dot3OamTrapsPrefix OBJECT IDENTIFIER ::= {dot3OamTraps 0}

      dot3OamLclErrSymPeriod NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamLclErrSymPeriodData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrSymPeriod trap is sent when the value of the
          dot3OamLclErrSymPeriodTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that too many symbol errors have occured on the specified
          interface, resulting in an Event Notification OAMPDU to a peer
          and trap to the management entity.

          The management entity should periodically check the value of
          dog3LclErrSymPeriodTime to detect any missed
          dot3OamErrSymPeriod trap-events. "
       ::= { dot3OamTrapsPrefix 1 }

      dot3OamLclErrFramePeriod NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamLclErrFramePeriodData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrFramePeriod trap is sent when the value of the
          dot3OamLclErrFramePeriodTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that too many frame errors have occured on the specified
          interface, resulting in an Event Notification OAMPDU to a peer


M. Squire              Expires - December 2004              [Page 44]


                             EFM OAM MIB                    June 2004


          and trap to the management entity.

          The management entity should periodically check the value of
          dog3LclErrFramePeriodTime to detect any missed
          dot3OamErrFramePeriod trap-events. "
       ::= { dot3OamTrapsPrefix 2 }

      dot3OamLclErrFrame NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamLclErrFrameData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrFrame trap is sent when the value of the
          dot3OamLclErrFrameTime changes for an Ethernet like interface
          supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that too many frame errors have occured on the specified
          interface, resulting in an Event Notification OAMPDU to a peer
          and trap to the management entity.

          The management entity should periodically check the value of
          dog3LclErrFrameTime to detect any missed dot3OamErrFrame
          trap-events. "
       ::= { dot3OamTrapsPrefix 3 }

      dot3OamLclErrFrameSecsSum NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamLclErrFrameSecsSumData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrFrameSecsSum trap is sent when the value of
          the dot3OamLclErrFrameSecsSumTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that too many errored frame seconds have occured on the
          specified interface, resulting in an Event Notification OAMPDU
          to a peer and trap to the management entity.

          The management entity should periodically check the value of
          dog3LclErrFrameSecsSumTime to detect any missed
          dot3OamErrFrameSecsSum trap-events. "

       ::= { dot3OamTrapsPrefix 4 }

      dot3OamLclErrEventFlags NOTIFICATION-TYPE


M. Squire              Expires - December 2004              [Page 45]


                             EFM OAM MIB                    June 2004


        OBJECTS { ifIndex,
                  dot3OamLclErrEventFlagsData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrEventFlags trap is sent when the value of
          the dot3OamLclErrEventFlagsTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a critical link event has been signaled by the sending
          entity on the given interface.  The value of the
          dot3OamLclErrEventFlagsData provides additional details on the
          critical event.

          The management entity should periodically check the value of
          dog3LclErrEventFlagsTime to detect any missed
          dot3OamEventFlags trap-events. "
       ::= { dot3OamTrapsPrefix 5 }

      dot3OamLclErrEventOther NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamLclErrEventOtherData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamLclErrEventOther trap is sent when the value of
          the dot3OamLclErrEventOtherTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that an organization specific link event has occurred on the
          specified interface.  The value of the
          dot3OamLclErrEventOtherData provides additional details on the
          organization specific link event.

          The management entity should periodically check the value of
          dog3LclErrEventOtherTime to detect any missed
          dot3OamEventOther trap-events. "
       ::= { dot3OamTrapsPrefix 6 }

      dot3OamRmtErrSymPeriod NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrSymPeriodData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamRmtErrSymPeriod trap is sent when the value of the
          dot3OamRmtErrSymPeriodTime changes for an Ethernet like


M. Squire              Expires - December 2004              [Page 46]


                             EFM OAM MIB                    June 2004


          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a Event Notification OAMPDU has been received on the
          specified interface indicating an Errored Symbol Period Event
          on the OAM peer entity.

          The management entity should periodically check the value of
          dog3RmtErrSymPeriodTime to detect any missed
          dot3OamErrSymPeriod trap-events. "
       ::= { dot3OamTrapsPrefix 7 }

      dot3OamRmtErrFramePeriod NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrFramePeriodData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamRmtErrFramePeriod trap is sent when the value of the
          dot3OamRmtErrFramePeriodTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a Event Notification OAMPDU has been received on the
          specified interface indicating an Errored Frame Period Event
          on the OAM peer entity.

          The management entity should periodically check the value of
          dog3RmtErrFramePeriodTime to detect any missed
          dot3OamErrFramePeriod trap-events. "
       ::= { dot3OamTrapsPrefix 8 }

      dot3OamRmtErrFrame NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrFrameData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamRmtErrFrame trap is sent when the value of the
          dot3OamRmtErrFrameTime changes for an Ethernet like interface
          supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a Event Notification OAMPDU has been received on the
          specified interface indicating an Errored Frame Event on the
          OAM peer entity.

          The management entity should periodically check the value of
          dog3RmtErrFrameTime to detect any missed dot3OamErrFrame


M. Squire              Expires - December 2004              [Page 47]


                             EFM OAM MIB                    June 2004


          trap-events. "
       ::= { dot3OamTrapsPrefix 9 }

      dot3OamRmtErrFrameSecsSum NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrFrameSecsSumData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamRmtErrFrameSecsSum trap is sent when the value of
          the dot3OamRmtErrFrameSecsSumTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a Event Notification OAMPDU has been received on the
          specified interface indicating an Errored Frame Seconds
          Summary Event on the OAM peer entity.

          The management entity should periodically check the value of
          dog3RmtErrFrameSecsSumTime to detect any missed
          dot3OamErrFrameSecsSum trap-events. "

       ::= { dot3OamTrapsPrefix 10 }

      dot3OamRmtErrEventFlags NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrEventFlagsData
                }
        STATUS  current
        DESCRIPTION
          "A dot3OamRmtErrEventFlags trap is sent when the value of
          the dot3OamRmtErrEventFlagsTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that a Event Notification OAMPDU has been received on the
          specified interface indicating a change in the critical event
          flags carried in the Flags field of the OAMPDU.

          The management entity should periodically check the value of
          dog3RmtErrEventFlagsTime to detect any missed
          dot3OamEventFlags trap-events. "
       ::= { dot3OamTrapsPrefix 11 }

      dot3OamRmtErrEventOther NOTIFICATION-TYPE
        OBJECTS { ifIndex,
                  dot3OamRmtErrEventOtherData
                }
        STATUS  current


M. Squire              Expires - December 2004              [Page 48]


                             EFM OAM MIB                    June 2004


        DESCRIPTION
          "A dot3OamRmtErrEventOther trap is sent when the value of
          the dot3OamRmtErrEventOtherTime changes for an Ethernet like
          interface supporting Ethernet OAM.

          This trap can be utilized to indicate to a management system
          that an organization specific link event has been received on
          the speified interface indicating an Organization Specific
          Link Event has occurred on the OAM Peer entity.

          The management entity should periodically check the value of
          dog3RmtErrEventOtherTime to detect any missed
          dot3OamRmtErrEventOther trap-events. "
       ::= { dot3OamTrapsPrefix 12 }



      ------------------------------------------------------------------
      --
      -- Ethernet OAM Compliance group
      --


      dot3OamGroups OBJECT IDENTIFIER ::= { dot3OamConformance 1 }
      dot3OamCompliances OBJECT IDENTIFIER ::= { dot3OamConformance 2 }

      -- Compliance statements

      dot3OamCompliance MODULE-COMPLIANCE
        STATUS          current
        DESCRIPTION "The compliance statement for managed entities
                     supporting OAM on Ethernet like interfaces.
                     "
      MODULE   -- this module
        MANDATORY-GROUPS { dot3OamControlGroup,
                           dot3OamPeerGroup,
                           dot3OamStatsBaseGroup
                         }

        GROUP       dot3OamLoopbackGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support loopback functionality. "

        GROUP       dot3OamErrSymbolPeriodEventGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support event functionality. "



M. Squire              Expires - December 2004              [Page 49]


                             EFM OAM MIB                    June 2004


        GROUP       dot3OamErrFramePeriodEventGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support event functionality. "

        GROUP       dot3OamErrFrameEventGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support event functionality. "

        GROUP       dot3OamErrFrameSecsSummaryEventGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support event functionality. "

        GROUP       dot3OamEventFlagsGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support criticle event functionality. "

        GROUP       dot3OamEventOtherGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support Organization Specific Event
          signaling.  "

        GROUP       dot3OamNotificationGroup
        DESCRIPTION
          "This group is mandatory for all IEEE 802.3 OAM
          implementations that support criticle event functionality. "

        ::= { dot3OamCompliances 1}


     dot3OamControlGroup OBJECT-GROUP
         OBJECTS     {  dot3OamRowStatus,
                        dot3OamAdminState,
                        dot3OamOperStatus,
                        dot3OamMode,
                        dot3OamMaxOamPduSize,
                        dot3OamConfigRevision,
                        dot3OamFunctionsSupported
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects providing the abilities,
          configuration, and status of an Ethernet OAM entity.  "
        ::= { dot3OamGroups 1 }



M. Squire              Expires - December 2004              [Page 50]


                             EFM OAM MIB                    June 2004


     dot3OamPeerGroup OBJECT-GROUP
         OBJECTS     {  dot3OamPeerRowStatus,
                        dot3OamPeerMacAddress,
                        dot3OamPeerVendorOui,
                        dot3OamPeerVendorInfo,
                        dot3OamPeerMode,
                        dot3OamPeerFunctionsSupported,
                        dot3OamPeerMaxOamPduSize,
                        dot3OamPeerConfigRevision
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects providing the abilities,
          configuration, and status of a peer Ethernet OAM entity.  "
        ::= { dot3OamGroups 2 }

     dot3OamStatsBaseGroup OBJECT-GROUP
         OBJECTS     {  dot3OamInformationTx,
                        dot3OamInformationRx,
                        dot3OamUniqueEventNotificationTx,
                        dot3OamUniqueEventNotificationRx,
                        dot3OamDuplicateEventNotificationTx,
                        dot3OamDuplicateEventNotificationRx,
                        dot3OamLoopbackControlTx,
                        dot3OamLoopbackControlRx,
                        dot3OamVariableRequestTx,
                        dot3OamVariableRequestRx,
                        dot3OamVariableResponseTx,
                        dot3OamVariableResponseRx,
                        dot3OamOrgSpecificTx,
                        dot3OamOrgSpecificRx,
                        dot3OamUnsupportedCodesTx,
                        dot3OamUnsupportedCodesRx,
                        dot3OamFramesLostDueToOam
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects providing the statistics for the
          number of various transmit and recieve events for OAM on an
          Ethernet like interface.  Note that all of these counters must
          be supported even if the related function (as described in
          dot3OamFunctionsSupported) is not supported.  "
        ::= { dot3OamGroups 3 }

     dot3OamLoopbackGroup OBJECT-GROUP
         OBJECTS     {  dot3OamLoopbackCommand,
                        dot3OamLoopbackStatus,
                        dot3OamLoopbackIgnoreRx
                     }


M. Squire              Expires - December 2004              [Page 51]


                             EFM OAM MIB                    June 2004


        STATUS      current
        DESCRIPTION
          "A collection of objects for controlling the OAM remote
          loopback function.  "
        ::= { dot3OamGroups 4 }

     dot3OamErrSymbolPeriodEventGroup OBJECT-GROUP
         OBJECTS     {  dot3OamErrSymPeriodWindow,
                        dot3OamErrSymPeriodThreshold,
                        dot3OamErrSymPeriodEvNotifEnable,
                        dot3OamLclErrSymPeriodTime,
                        dot3OamLclErrSymPeriodData,
                        dot3OamRmtErrSymPeriodTime,
                        dot3OamRmtErrSymPeriodData
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects for configuring the thresholds for an
          Errored Symbol Period Event and maintaining the event
          information.  "
        ::= { dot3OamGroups 5 }

     dot3OamErrFramePeriodEventGroup OBJECT-GROUP
         OBJECTS     {  dot3OamErrFramePeriodWindow,
                        dot3OamErrFramePeriodThreshold,
                        dot3OamErrFramePeriodEvNotifEnable,
                        dot3OamLclErrFramePeriodTime,
                        dot3OamLclErrFramePeriodData,
                        dot3OamRmtErrFramePeriodTime,
                        dot3OamRmtErrFramePeriodData
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects for configuring the thresholds for an
          Errored Frame Period Event and maintaining the event
          information.  "
        ::= { dot3OamGroups 6 }

     dot3OamErrFrameEventGroup OBJECT-GROUP
         OBJECTS     {  dot3OamErrFrameWindow,
                        dot3OamErrFrameThreshold,
                        dot3OamErrFrameEvNotifEnable,
                        dot3OamLclErrFrameTime,
                        dot3OamLclErrFrameData,
                        dot3OamRmtErrFrameTime,
                        dot3OamRmtErrFrameData
                     }
        STATUS      current
        DESCRIPTION


M. Squire              Expires - December 2004              [Page 52]


                             EFM OAM MIB                    June 2004


          "A collection of objects for configuring the thresholds for an
          Errored Frame Event and maintaining the event information.  "
        ::= { dot3OamGroups 7 }

     dot3OamErrFrameSecsSummaryEventGroup OBJECT-GROUP
         OBJECTS     {  dot3OamErrFrameSecsSummaryWindow,
                        dot3OamErrFrameSecsSummaryThreshold,
                        dot3OamErrFrameSecsEvNotifEnable,
                        dot3OamLclErrFrameSecsSumTime,
                        dot3OamLclErrFrameSecsSumData,
                        dot3OamRmtErrFrameSecsSumTime,
                        dot3OamRmtErrFrameSecsSumData
                     }
        STATUS      current
        DESCRIPTION
          "A collection of objects for configuring the thresholds for an
          Errored Frame Seconds Summary Event and maintaining the event
          information.  "
        ::= { dot3OamGroups 8 }

     dot3OamEventFlagsGroup OBJECT-GROUP
       OBJECTS {   dot3OamLclErrEventFlagsTime,
                   dot3OamLclErrEventFlagsData,
                   dot3OamRmtErrEventFlagsTime,
                   dot3OamRmtErrEventFlagsData
               }
        STATUS      current
        DESCRIPTION
          "A collection of objects for displayng the status of the event
          flags (link fault, critical, dying gasp) in transmitted and
          received OAMPDUs, reflecting the current status of critical
          event information. "
        ::= { dot3OamGroups 9 }

     dot3OamEventOtherGroup OBJECT-GROUP
       OBJECTS {   dot3OamLclErrEventOtherTime,
                   dot3OamLclErrEventOtherData,
                   dot3OamRmtErrEventOtherTime,
                   dot3OamRmtErrEventOtherData
               }
        STATUS      current
        DESCRIPTION
          "A collection of objects for displayng the status of any
          Organization Specific Events that have occurred on the
          Ethernet-like interface.  "
        ::= { dot3OamGroups 10 }

     dot3OamNotificationGroup NOTIFICATION-GROUP
       NOTIFICATIONS {


M. Squire              Expires - December 2004              [Page 53]


                             EFM OAM MIB                    June 2004


                   dot3OamLclErrSymPeriod,
                   dot3OamLclErrFramePeriod,
                   dot3OamLclErrFrame,
                   dot3OamLclErrFrameSecsSum,
                   dot3OamLclErrEventFlags,
                   dot3OamLclErrEventOther,
                   dot3OamRmtErrSymPeriod,
                   dot3OamRmtErrFramePeriod,
                   dot3OamRmtErrFrame,
                   dot3OamRmtErrFrameSecsSum,
                   dot3OamRmtErrEventFlags,
                   dot3OamRmtErrEventOther
               }
       STATUS      current
       DESCRIPTION
         "A collection of notifications used by Ethernet OAM to signal
         to a management entity that local or remote events have occured
         on a specified Ethernet link."
       ::= { dot3OamGroups 11 }


      END


7. Security Considerations

   The readable objects in this module can provide information about
   network traffic, and therefore may be considered sensitive.  In
   particular, OAM provides mechanisms for reading the IEEE 802.3 Clause
   30 MIB attributes from a link partner via a specialized layer two
   protocol.  Unlike SNMP, IEEE P802.3ah OAM does not include encryption
   or authorization mechanisms.  It should be used in environments where
   either this interface information is not considered sensitive, or
   where the facility terminations are protected.  By default, OAM is
   disabled on Ethernet-like interfaces and is therefore not a risk.

   IEEE 802.3ah OAM is designed to support deployment in access and
   enterprise networks.  In access networks, one end of a link is the
   CO-side, and the other is the CPE-side, and the facilities are often
   protected in wiring cages or closets.  In such deployments, it is
   often the case that the CO-side is protected from access from the CPE
   side.  Within IEEE P802.3ah OAM, this protection from remote access
   is accomplished by configuring the CPE-side in passive mode using the
   dot3OamMode attribute.  This prevents the CPE from accessing
   functions and information at the CO-side of the connection.  In
   enterprise networks, read-only interface information is often
   considered non-sensitive.




M. Squire              Expires - December 2004              [Page 54]


                             EFM OAM MIB                    June 2004


   The operation of OAM on an Ethernet interface does not adversely
   affect data traffic as OAM is a slow protocol with very limited
   bandwidth potential, and it is not required for normal link
   operation.  And although there are a number of objects in this module
   with read-write or read-create MAX-ACCESS, they only affect the
   operation of the OAM protocol itself and not user data traffic.

   The loopback capability of OAM can have potentially disruptive
   effects in that the when enabling remote loopback, the remote station
   automatically transmits all received traffic back to the local
   station except for OAM traffic.  This completely disrupts all higher
   layer protocols such as bridging, IP, and SNMP.  Therefore an
   attribute (dot3OamLoopbackIgnoreRx) was introduced to control whether
   the local station processes or ignores received loopback commands.

   SNMP versions prior to SNMPv3 did not include adequate security. Even
   if the network itself is secure (for example by using IPSec), even
   then, there is no control as to who on the secure network is allowed
   to access and GET/SET (read/change/create/delete) the objects in this
   MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them


8. References

8.1 Normative References

   [802.3ah] Institute of Electrical and Electronic Engineers, IEEE
   Draft 802.3ah-2002 Draft 3.3, "IEEE Standard for Carrier Sense
   Multiple Access with Collision Detection (CSMA/CD) Access Method and
   Physical Layer Specifications - Draft amendment to – Information
   technology - Telecommunications and information exchange between
   systems - Local and metropolitan area networks - Specific
   requirements - Part 3: Carrier sense multiple access with collision
   detection (CSMA/CD) access method and physical layer specifications –
   Media Access Control Parameters, Physical Layers and Management
   Parameters", May 2004.


M. Squire              Expires - December 2004              [Page 55]


                             EFM OAM MIB                    June 2004



   [802.3-2002]   Institute of Electrical and Electronic Engineers, IEEE
   Std 802.3-2003, "IEEE Standard for Carrier Sense Multiple Access with
   Collision Detection (CSMA/CD) Access Method and Physical Layer
   Specifications - Draft amendment to – Information technology -
   Telecommunications and information exchange between systems - Local
   and metropolitan area networks - Specific requirements - Part 3:
   Carrier sense multiple access with collision detection (CSMA/CD)
   access method and physical layer specifications – Media Access
   Control Parameters, Physical Layers and Management Parameters", March
   2002.

   [802-2001]  Institute of Electrical and Electronic Engineers, IEEE
   Std 802-2001, "Standard for Local and Metropolitan Area Networks:
   Architecture and Overview", March 2002.

   [RFC2026]   Bradner, S, "The Internet Standards Process -- Revision
   3", BCP 9, RFC 2026, October 1996.

   [RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate
   Requirement Levels", BCP 14, RFC 2119, March 1997

   [RFC2578]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
   McCloghrie, K., Rose, M. and S. Waldbusser, "Structure of Management
   Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
   McCloghrie, K., Rose, M. and S. Waldbusser, "Textual Conventions for
   SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]   McCloghrie, K., Perkins, D. and J. Schoenwaelder,
   "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.

   [RFC3668]   Bradner, S. "Intellectual Property Rights in IETF
   Technology", BCP 79, RFC 3668, February 2004.

8.2 Informative References

   [802.3ah-copper] Beili, Ed, "Managed Objects for Ethernet Passive
   Optical Networks", draft-ietf-hubmib-efm-epon-mib-01.txt, April 2004.

   [802.3ah-epon] Khermosh, Lior, "Ethernet in the First Mile Copper
   (EFMCu) Interfaces MIB", draft-ietf-hubmib-efm-cu-mib-00.txt, January
   2004.

   [RFC2665]   Flick, J. and Johnson J. "Definitions of Managed Objects
   for the Ethernet-like Interface Types", STD 58, RFC 2580, April 1999.




M. Squire              Expires - December 2004              [Page 56]


                             EFM OAM MIB                    June 2004


   [RFC2863]   McCloghrie, K., Kastenholz, F., "The Interfaces Group
   MIB", RFC 2863, June 2000.

   [RFC3410]   Case, J., Mundy, R., Partain, D., Stewart, B.,
   "Introduction and Applicability Statements for Internet Standard
   Management Framework", RFC 3410, December 2003.

   [RFC3635]   Flick, J., "Definitions of Managed Objects for the
   Ethernet-like Interface Types", RFC 3635, September 2003.

   [RFC3636]   Flick, J., "Definitions of Managed Objects for IEEE 802.3
   Medium Attachment Units (MAUs)", RFC 3636, September 2003.


9. Acknowledgments

   The author is grateful to all of the participants in the IEEE 802.3ah
   EFM (Ethernet in the First Mile) taskforce.  In particular, the
   strong leadership and dedication of the following individuals is
   noted:

      Kevin Daines (Editor, IEEE 802.3ah OAM clauses)
      Ben Brown (Editor, IEEE 802.3ah Logic clauses)
      David Law (Editor, IEEE 802.3ah Management clauses)
      Scott Simon (Editor, IEEE 802.3ah Clause 45)
      Howard Frazier (Chair, IEEE 802.3ah)
      Hugh Barass (Vice-Chair, IEEE 802.3ah)
      Wael Diab (Editor, IEEE 802.3ah)

   Additionally, certain devoted attendees and contributors to the IEEE
   802.3ah OAM sub-taskforce deserve recognition.  Although there were
   many contributors, the following individuals contributed heavily over
   a long period of time.

      Brian Arnold
      Brad Booth
      Al Braga
      Floyd Gerhardt
      Bob Grow
      Eric Lynskey
      David Martin
      John Messenger
      Dan Romascanu (Chair, IETF HUBMIB WG)
      Jonathan Thatcher
      Geoff Thompson


10. Author's Address



M. Squire              Expires - December 2004              [Page 57]


                             EFM OAM MIB                    June 2004


   Note: Author’s email address is spelled out to help protect against
   email address harvesting programs.

   Matt Squire
   Hatteras Networks
   639 Davis Drive, Suite 200
   Phone: 919-991-5460
   Email: msquire at hatterasnetworks dot com


11. Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf
   ipr@ietf.org.

   The IETF has been notified of intellectual property rights claimed in
   regard to some or all of the specification contained in this
   document.  For more information consult the online list of claimed
   rights.


12. Copyright Statement

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET


M. Squire              Expires - December 2004              [Page 58]


                             EFM OAM MIB                    June 2004


   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.









































M. Squire              Expires - December 2004              [Page 59]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/