[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08

INTERNET-DRAFT                                              Sean Harnedy
                                                  Mangrove Systems, Inc.
Expires: March 2006                                        Bhargavi Shah
                                                   Fabric Networks Corp.
                                                          Bill Swortwood
                                                    Motorola Corporation
                                                          September 2005

                   Definitions of Managed Objects for the
                  InfiniBand Subnet Management Agent (SMA)

              <draft-ietf-ipoib-subnet-mgmt-agent-mib-08.txt>

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html


Abstract

   InfiniBand Architecture (IBA) specifies a high speed, channel based,
   switched fabric architecture that delivers scalable performance in
   data centers.

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it defines objects for managing InfiniBand Subnet
   Management Agents (SMA).

Copyright Notice

   Copyright (C) The Internet Society (2005).  All Rights Reserved.






Expires March 2006                                              [Page 1]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


Table of Contents

   1. Introduction ................................................    3
   2. The Internet-Standard Management Framework ..................    3
   3. Structure of the MIB ........................................    3
   3.1. Overview ..................................................    3
   3.2. Discussion of MIB Groups ..................................    4
   3.3. The SMA MIB Objects .......................................    4
   3.3.1. The Node Info Group .....................................    4
   3.3.2. The Switch Info Group ...................................    4
   3.3.3. The GUID Info Group .....................................    4
   3.3.4. The Management Port Info Group ..........................    4
   3.3.5. The Data Port Info Group ................................    4
   3.3.6. The Partition Key Group .................................    4
   3.3.7. The Service-Level-to-Virtual-Lane-Mapping Group .........    4
   3.3.8. The Virtual Lane Arbitration Group ......................    5
   3.3.9. The Linear Forwarding Group .............................    5
   3.3.10. The Random Forwarding Group ............................    5
   3.3.11. The Multicast Forwarding Group .........................    5
   3.3.12. The Subnet Manager Info Group ..........................    5
   3.3.13. The Vendor Diagnostics Group ...........................    5
   3.3.14. The LED Info Group .....................................    5
   3.4. The SMA Notifications Group ...............................    5
   3.4.1. SMA Notifications .......................................    5
   3.5. The SMA Conformance Group .................................    5
   3.5.1. SMA Compliance Groups ...................................    6
   4. IPOIB SMA MIB Definitions ...................................    6
   5. Acknowledgments .............................................   67
   6. Security Considerations .....................................   67
   7. IANA Considerations .........................................   67
   8. References ..................................................   68
   8.1. Normative References ......................................   68
   8.2. Informative References ....................................   68
   9. Authors' Addresses ..........................................   68
   10. Intellectual Property Notice ...............................   69
   11. Full Copyright Statement ...................................   69


















Expires March 2006                                              [Page 2]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


1. Introduction

   This document defines a MIB for the InfiniBand Subnet Management
   Agent (SMA).

   The InfiniBand Architecture [INFINIV1] is defined by the InfiniBand
   Trade Association.  InfiniBand is designed to provide low latency
   high bandwidth interconnect in a computing environment.  This
   document will define the objects related to managing the Subnet
   Management Agent on each device in an InfiniBand Fabric.

   Each InfiniBand node -- switch, channel adapter (CA), or router
   -- includes a managed entity called the Subnet Management Agent
   (SMA).  All SMAs in an InfiniBand subnet are managed by the master
   Subnet Manager (SM).

   The SMA receives and transmits the class of Management Datagrams
   (MAD) called Subnet Management Packets (SMP) when it communicates
   with the SM.  Note: SMPs never travel beyond the boundaries of its
   local InfiniBand subnet.  Also, SMPs always use Virtual Lane 15
   (VL15) and are exclusively addressed to Queue Pair 0 (QP0).

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT"
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in
   this document are to be interpreted as described in
   RFC 2119 [RFC2119].


2. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].


3. Structure of the MIB

   This section describes the structure of the IPOIB SMA MIB.

3.1. Overview

   The SNMP management of the SMA involves the monitoring of key subnet
   management attributes.


Expires March 2006                                              [Page 3]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


3.2. Discussion of MIB Groups

   The SMA MIB is divided into three basic groups: MIB objects, events
   (notifications), and the conformance section.

3.3.  The SMA MIB Objects

   The SMA MIB objects primarily correlate to the Subnet Management
   Attributes as defined in Table 116 Subnet Management Attributes
   (Summary) from InfiniBand Architecture Release 1.1. Vol. 1.
   [INFINIV1].

   These attributes are organized into fourteen major SMA MIB groups.
   These are: The Node Info Group, The Switch Info Group, The GUID Info
   Group, the Management Port Info Group, the Data Port Info Group, the
   Partition Key Group, the Service-Level-to-Virtual-Lane-Mapping Group,
   the Virtual Lane Arbitration Group, the Linear Forwarding Group, the
   Random Forwarding Group, the Multicast Forwarding Group, the Subnet
   Manager Info Group, the Vendor Diagnostics Group, and the LED Info
   Group.

3.3.1.  The Node Info Group

   This group provides node-level information common to any InfiniBand
   node (switch, router, or CA).

3.3.2. The Switch Info Group

   This group contains management information about InfiniBand switches.

3.3.3. The GUID Info Group

   This group contains the assigned local scope EUI-64 IEEE-defined
   64-bit extended unique identifier (EUI-64) identifiers for CAs,
   routers, and switch management ports.

3.3.4. The Management Port Info Group

   This group contains management information about the management port.

3.3.5. The Data Port Info Group

   This group contains management information about the data ports.

3.3.6. The Partition Key Group

   This group contains a table with information about the Partition
   Keys (P-Keys).

3.3.7. The Service-Level-to-Virtual-Lane (SLToVL) Mapping Group

   This group contains the SLToVL Mapping Table that allows the
   mapping of Virtual Lanes to Service Levels.

Expires March 2006                                              [Page 4]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


3.3.8. The Virtual Lane Arbitration Group

   This group contains the table that can be used to examine the VL
   arbitration for the node's ports.

3.3.9. The Linear Forwarding Group

   This group contains information about the Linear Unicast Forwarding
   Table.

3.3.10. The Random Forwarding Group

   This group contains information about the Random Unicast Forwarding
   Table.

3.3.11. The Multicast Forwarding Group

   This group contains information about the Multicast Forwarding Table.

3.3.12. The Subnet Manager Info Group

   This group contains information that the Subnet Manager can use for
   its tasks of subnet discovery, polling, etc.

3.3.13. The Vendor Diagnostics Group

   This group contains vendor-specific diagnostic information.

3.3.14. The LED Info Group

   This group contains information about the node's LEDs.

3.4.  The SMA Notifications Group

   The SMA Notifications Group contains the definitions for the agent
   events.

3.4.1.  SMA Notifications

   Currently, there are several notifications which are specific for
   the SMA MIB. These include the mapping of the InfiniBand Traps
   to SNMP notifications. The InfiniBand traps are summarized in
   Table 118 Traps (Section 14.2.5.1) from InfiniBand Architecture
   Release 1.1 Vol. 1. [INFINIV1]

3.5.  The SMA Conformance Group

   The SMA Conformance Group lists the possible compliances for various
   types of InfiniBand nodes (basic, full switch and full router/channel
   adapter), and the units of conformance which define the constituent
   object groups.



Expires March 2006                                              [Page 5]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


3.5.1.  SMA Compliance Groups

   The Compliance Groups list acceptable MIB implementation
   requirements.


4. IPOIB SMA MIB Definitions

IB-SMA-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE,
   Counter32, NOTIFICATION-TYPE, Unsigned32     FROM SNMPv2-SMI
   TruthValue                                   FROM SNMPv2-TC
   SnmpAdminString                              FROM SNMP-FRAMEWORK-MIB
   MODULE-COMPLIANCE, OBJECT-GROUP,
   NOTIFICATION-GROUP                           FROM SNMPv2-CONF
   IbDataPort, IbDataPortAndInvalid, IbGuid,
   IbUnicastLid, IbMulticastLid,
   IbSmPortList, infinibandMIB                  FROM IB-TC-MIB;

ibSmaMIB MODULE-IDENTITY
   LAST-UPDATED "200509011200Z"  -- 1 September 2005 12:00:00 GMT
   ORGANIZATION "IETF IP Over IB (IPOIB) Working Group"
   CONTACT-INFO
       "Sean Harnedy (sharnedy@mangrovesystems.com)
        Mangrove Systems, Inc.

        Bhargavi Shah (bshah@fabricnetworks.com)
        Fabric Networks Corporation

        Bill Swortwood (Bill.Swortwood@motorola.com)
        Motorola Corporation

        Email comments to the IPOIB WG Mailing List at
        ipoverib@ietf.org."
   DESCRIPTION
      "Copyright (C) The Internet Society (2005).  The initial
       version of this MIB module was published in RFC XXXX; for
       full legal notices see the RFC itself.  Supplementary
       information may be available on
       http://www.ietf.org/copyrights/ianamib.html.

       This module contains managed object definitions for
       the Subnet Management Agent instrumentation for an
       InfiniBand Subnet Management Agent (SMA)."
   REVISION
      "200509011200Z"  -- 1 September 2005 12:00:00 GMT
   DESCRIPTION
      "Initial version published as part of RFC XXXX."
   ::= { infinibandMIB 3 }



Expires March 2006                                              [Page 6]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


--****************************************************************
--  Object Identifiers for the IPOIB SMA MIB
--****************************************************************
   ibSmaObjects OBJECT IDENTIFIER ::= { ibSmaMIB 1 }
   ibSmaNotifications OBJECT IDENTIFIER ::= { ibSmaMIB 2 }
   ibSmaConformance OBJECT IDENTIFIER ::= { ibSmaMIB 3 }

--****************************************************************
-- Node Info Group
--****************************************************************
   ibSmaNodeInfo OBJECT IDENTIFIER ::= { ibSmaObjects 1 }

--****************************************************************
-- NodeInfo Scalars Group
--
-- DESCRIPTION: This group contains scalar variables that describe
--    information about the node.  It also contains objects that can
--    be used to monitor the behavior of this node via information
--    provided by the SMA.
--****************************************************************
ibSmaNodeString OBJECT-TYPE
   SYNTAX SnmpAdminString(SIZE(1..64))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The node description.  This is the Node description string
       from the NodeDescription attribute.  The contents of the
       NodeDescription attribute is the same for all ports on a
       node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.2; Table 127 NodeDescription."
   ::= { ibSmaNodeInfo 1 }

ibSmaNodeBaseVersion OBJECT-TYPE
   SYNTAX Unsigned32(1..255)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The supported Management Datagram (MAD) base version.
       This value indicates that the node supports up to and
       including this version.  This value is the same for all
       ports on a node.  (NOTE: for InfiniBand Release 1 this
       value should be set to 1.)"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 2 }

ibSmaNodeClassVersion OBJECT-TYPE
   SYNTAX Unsigned32(1..255)
   MAX-ACCESS read-only
   STATUS current

Expires March 2006                                              [Page 7]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005

   DESCRIPTION
      "The supported Subnet Management Class (SMP) version.
       This value indicates that the node supports up to and
       including this version.  This value is the same for all
       ports on a node.  (NOTE: for InfiniBand Release 1 this
       value should be set to 1.)"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 3 }

ibSmaNodeType OBJECT-TYPE
   SYNTAX INTEGER
               {
               channelAdapter(1),
               switch(2),
               router(3),
               reserved(4)
               }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Type of IBA device this SMA is supporting.  InfiniBand types
       are
             1: Channel Adapter
             2: Switch
             3: Router
       0,4-255: reserved"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 4 }

ibSmaNodeNumPorts OBJECT-TYPE
   SYNTAX Unsigned32(0..254)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The number of physical InfiniBand ports on this node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 5 }

ibSmaSystemImageGuid OBJECT-TYPE
   SYNTAX IbGuid
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The GUID of this node that associates this node with
       other nodes in the same administrative domain.  These
       nodes are controlled by common supervisory code.
       This object provides a way for system software to
       indicate the availability of multiple paths to the

Expires March 2006                                              [Page 8]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       same destination via multiple nodes.  If this value is
       0, there is no association.  This object may be equal
       to the ibSmaNodeGuid of one of the associated nodes
       if that node is not field-replaceable."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 6 }

ibSmaNodeGuid OBJECT-TYPE
   SYNTAX IbGuid
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The GUID of this node. The node can be a Host Channel Adpater
       (HCA), Terminal Channel Adapter (TCA), switch, or router.
       All ports on the same node shall report the same NodeGUID
       value.  This provides a means for uniquely identifying a
       node within a subnet and helps to determine the co-location
       of the ports."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 7 }

ibSmaNodePortGuid OBJECT-TYPE
   SYNTAX IbGuid
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The node port GUID.  One port within a node can return
       the NodeGUID as its PortGUID if the port is an integral
       part of the node and is not field-replaceable."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 8 }

ibSmaNodePartitionTableNum OBJECT-TYPE
   SYNTAX Unsigned32(1..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of entries in the Partition Table for CA, router, and
       the switch management port.  This is at a minimum set to 1
       for all nodes including switches.  This value shall be the same
       for all ports on a node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 9 }



Expires March 2006                                              [Page 9]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaNodeDeviceId OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(2))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Device ID information as assigned by the device manufacturer.
       This value shall be the same for all ports on a node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 10 }

ibSmaNodeRevision OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(4))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Manufacturer assigned device revision.  This value shall be
       the same for all ports on a node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 11 }

ibSmaNodeLocalPortNumOrZero OBJECT-TYPE
   SYNTAX Unsigned32(0..254)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The number of the IBA port which received this SNMP request.
       If the port is unknown a 0 is returned."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 12 }

ibSmaNodeVendorId OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(3))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "IEEE specified device vendor identifier.  This value shall be
       the same for all ports on a node."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.3; Table 128 NodeInfo."
   ::= { ibSmaNodeInfo 13 }

--
-- Objects required for Notification variable binding lists.
--



Expires March 2006                                             [Page 10]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaNodeLid OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Local Identifier value.  Used for notification var bind
       list object.  Retrieved from InfiniBand traps 128, 129, 130,
       131, 144, 145, 256, 257, 258, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 14 }

ibSmaNodePortNum OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Port number.  Used for notification var bind list object.
       Retrieved from InfiniBand traps 129, 130, 131, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 15 }

ibSmaNodeMethod OBJECT-TYPE
   SYNTAX Unsigned32(0..255)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Method.  Used for notification var bind list object.
       Retrieved from InfiniBand trap 256."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 16 }

ibSmaNodeAttributeId OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Attribute ID.  Used for notification var bind list object.
       Retrieved from InfiniBand trap 256."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 17 }


Expires March 2006                                             [Page 11]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaNodeAttributeModifier OBJECT-TYPE
   SYNTAX Unsigned32(0..4294967295)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Attribute Modifier.  Used for notification var bind list object.
       Retrieved from InfiniBand trap 256."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 18 }

ibSmaNodeKey OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(8))
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "M_Key, Q_Key or P_Key.  Used for notification var bind list
       object.  Retrieved from InfiniBand traps 256, 257, 258, and 259.
       Note: If it is a P_Key, the 16 most significant bits of the field
       shall be set to 0 and the least significant bits of the field
       will be set to the P_Key."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.  Section 14.2.5.1;
       Tables 119 -- 126 Traps and Notice Data Details For Traps nnn."
   ::= { ibSmaNodeInfo 19 }

ibSmaNodeLid2 OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "To Local Identifier (LID). Used for notification var bind list
       object.  Retrieved from InfiniBand traps 257, 258, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 20 }

ibSmaNodeServiceLevel OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Service Level.  Used for notification var bind list object.
       Retrieved from InfiniBand traps 257, 258, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 21 }

Expires March 2006                                             [Page 12]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaNodeQueuePair1 OBJECT-TYPE
   SYNTAX Unsigned32(0..16777215)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Queue Pair (QP) 1.  Used for notification var bind list object.
       Retrieved from InfiniBand traps 257, 258, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 22 }

ibSmaNodeQueuePair2 OBJECT-TYPE
   SYNTAX Unsigned32(0..16777215)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Queue Pair (QP) 2.  Used for notification var bind list object.
       Retrieved from InfiniBand traps 257, 258, and 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 23 }

ibSmaNodeGid1 OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(16))
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Global Identifier 1. Used for notification var bind list object.
       Retrieved from InfiniBand traps 64, 65, 66, 67, 257, 258, and
       259.  Note: If no Global Routing Header (GRH) is present in the
       offending packet, this value will be all zeros."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 24 }

ibSmaNodeGid2 OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(16))
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Global Identifier 2.  Used for notification var bind list object.
       Retrieved from InfiniBand traps 257, 258, and 258.  Note: If no
       GRH is present in the offending packet, this value will be all
       zeros."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data

Expires March 2006                                             [Page 13]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       Details For Traps nnn."
   ::= { ibSmaNodeInfo 25 }

ibSmaNodeCapMask OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(4))
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Contents of Capability Mask.  Retrieved from InfiniBand trap
       144."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 26 }

ibSmaNodeSwitchLid OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "The switch Local Identifier (LID).  Used for notification var
       bind list object.  Retrieved from InfiniBand traps 259."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 27 }

ibSmaNodeDataValid OBJECT-TYPE
   SYNTAX BITS {
               lidaddr1(0),
               lidaddr2(1),
               pkey(2),
               sl(3),
               qp1(4),
               qp2(5),
               gidaddr1(6),
               gidaddr2(7)
               }
   MAX-ACCESS accessible-for-notify
   STATUS current
   DESCRIPTION
      "Data valid field retrieved from InfiniBand trap 259.
       It is a bit mask.  If the bit is set, the field is valid.
          bit 0: LIDADDR1
          bit 1: LIDADDR2
          bit 2: PKEY
          bit 3: SL
          bit 4: QP1
          bit 5: QP2
          bit 6: GIDADDR1
          bit 7: GIDADDR2

Expires March 2006                                             [Page 14]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


          bit 8-15: reserved (0)."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Tables 119 -- 126 Traps and Notice Data
       Details For Traps nnn."
   ::= { ibSmaNodeInfo 28 }

--****************************************************************
-- Switch Info Group
--****************************************************************
ibSmaSwitchInfo OBJECT IDENTIFIER ::= { ibSmaObjects 2 }

--****************************************************************
-- SwitchInfo Scalars Group
--
-- DESCRIPTION: This group contains scalar variables that describe
--    information about an InfiniBand switch.  This group shall be
--    implemented by all switches.
--****************************************************************

ibSmaSwLinearFdbTableNum OBJECT-TYPE
   SYNTAX Unsigned32(0..49151)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of entries in the Linear Forwarding Data Base.  This
       is the number of entries supported in the Linear Unicast
       Forwarding Table (starting at LID=0x0000 and going up).
       The InfiniBand SwitchInfo component is called LinearFDBCap.
       When the count is 0, this indicates that there is no Linear
       Forwarding Database present."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 1 }

ibSmaSwRandomFdbTableNum OBJECT-TYPE
   SYNTAX Unsigned32(0..49151)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of entries in the Random Forwarding Data Base.  This
       is the number of entries supported in the Random Unicast
       Forwarding Table.  The InfiniBand SwitchInfo component is
       called RandomFDBCap. When the count is 0, this indicates
       that there is no Random Forwarding Database present."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 2 }




Expires March 2006                                             [Page 15]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaSwMulticastFdbTableNum OBJECT-TYPE
   SYNTAX Unsigned32(0..16383)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of entries in the Multicast Forwarding Data Base.  This
       is the number of entries supported in the Multicast
       Forwarding Table (starting at LID=0xC000 and going up).
       The InfiniBand SwitchInfo component is called MulticastFDBCap."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 3 }

ibSmaSwLinearFdbTop OBJECT-TYPE
   SYNTAX Unsigned32(0..49151)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Indicates the top of the linear forwarding database.  Packets
       received with unicast DLIDs greater than this value are
       discarded by the switch.  A valid LinearFdbTop is less than
       LinearFdbCap. This component applies only to switches that
       implement linear forwarding tables and is ignored by switches
       that implement random forwarding tables.  For the latter cases
       a 0 is returned."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 4 }

ibSmaSwDefaultPort OBJECT-TYPE
   SYNTAX Unsigned32(0..254)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Default forwarding port for unicast packets from the other
       ports whose DLID does not exist in the random forwarding
       table.  If the port number is unknown, a 0 is returned."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 5 }

ibSmaSwDefMcastPriPort OBJECT-TYPE
   SYNTAX Unsigned32(0..254)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Default forwarding port for multicast packets from the other
       ports whose DLID does not exist in the forwarding table.  If
       port number is unknown, a 0 is returned."


Expires March 2006                                             [Page 16]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo.  Also section
       18.2.4.3.3 on Required Multicast Relay."
   ::= { ibSmaSwitchInfo 6 }

ibSmaSwDefMcastNotPriPort OBJECT-TYPE
   SYNTAX Unsigned32(0..254)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Forward to this port all the multicast packets from the
       Default Primary port whose DLID does not exist in the
       forwarding table.  If it is unknown, a 0 is returned."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo. Also section
       18.2.4.3.3 on Required Multicast Relay."
   ::= { ibSmaSwitchInfo 7 }

ibSmaSwLifeTimeValue OBJECT-TYPE
   SYNTAX Unsigned32(0..20)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Reports the time a packet can live in the switch.  This Lifetime
       Value (LV) is used as a parameter to calculate Switch Lifetime
       Limit (SLL) value.  To calculate a valid SLL, the LV must be
       between 0 and 19, inclusive.  If the LV value is greater than
       19, the SLL is to be interpreted as infinite."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo. Also section
       18.2.5.4 on Transmitter Queueing."
   ::= { ibSmaSwitchInfo 8 }

ibSmaSwPortStateChange OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "This object is set to true(1) whenever the PortState component
       makes any of the following state changes in the link finite
       state machine (FSM):

       Down --> Initialize,
       Initialize --> Down,
       Armed --> Down, or
       Active --> Down"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 9 }

Expires March 2006                                             [Page 17]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaSwLidsPerPort OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the number of LID/Link Mask Control (LMC) combinations
       that may be assigned to a given external port for switches that
       support the Random Forwarding table."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 10 }

ibSmaSwPartitionEnforceNum OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the number of entries in the partition enforcement
       table per physical IBA port.  The 0 value indicates that
       partition enforcement is not supported by the switch."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 11 }

ibSmaSwInboundEnforceCap OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag that indicates whether the switch is capable
       of partition enforcement on received packets."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 12 }

ibSmaSwOutboundEnforceCap OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag that indicates whether the switch is capable
       of partition enforcement on transmitted packets."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 13 }





Expires March 2006                                             [Page 18]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaSwFilterRawPktInputCap OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag to indicate whether the switch is capable of
       raw packet enforcement on received packets."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 14 }

ibSmaSwFilterRawPktOutputCap OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag to indicate whether the switch is capable of
       raw packet enforcement on transmitted packets."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 15 }

ibSmaSwEnhancedPort0  OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag to indicate whether switch port 0 supports enhanced
       functions (TCA port).  If false, switch port 0 is a base
       switch port 0."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.4; Table 129 SwitchInfo."
   ::= { ibSmaSwitchInfo 16 }

--****************************************************************
-- The GUID Info Group
--****************************************************************
ibSmaGuidInfo OBJECT IDENTIFIER ::= { ibSmaObjects 3 }

-- *************************************************************
-- The Global Unique Identifier (GUID) Info Group
--
-- DESCRIPTION: The Global Unique Identifier Table.
-- *************************************************************

ibSmaGuidInfoTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaGuidInfoEntry
   MAX-ACCESS not-accessible
   STATUS current


Expires March 2006                                             [Page 19]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "A table containing SMA GUID information."
   ::= { ibSmaGuidInfo 1 }

ibSmaGuidInfoEntry OBJECT-TYPE
   SYNTAX IbSmaGuidInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaGuidInfoTable containing
       information about a particular GUID entry."
   INDEX   { ibSmaGuidPortIndex, ibSmaGuidIndex }
   ::= { ibSmaGuidInfoTable 1 }

IbSmaGuidInfoEntry ::= SEQUENCE {
   ibSmaGuidPortIndex IbDataPort,
   ibSmaGuidIndex Unsigned32,
   ibSmaGuidVal IbGuid
   }

ibSmaGuidPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Index that identifies IB port associated with this GUID table."
   ::= { ibSmaGuidInfoEntry 1 }

ibSmaGuidIndex OBJECT-TYPE
   SYNTAX Unsigned32(1..255)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Index that identifies the GUID entry for this port.  For any IB
       port there can be multiple 64 bit GUIDs assigned.  The maximum
       number is implementation dependent (up to 255).  If the port does
       not have a GUID assigned to it, the row will have 1 entry with a
       ibSmaGuidVal value of zeroes."
   ::= { ibSmaGuidInfoEntry 2 }

ibSmaGuidVal OBJECT-TYPE
   SYNTAX IbGuid
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "A Global Unique Identifier (GUID) for this port entity."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.  Section 14.2.5.5;
       Table 130 GUIDInfo and Table 131 GUID Block Element."
   ::= { ibSmaGuidInfoEntry 3 }




Expires March 2006                                             [Page 20]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


--****************************************************************
-- The Port Info Group
--****************************************************************

--****************************************************************
-- PortInfo Management Port Scalars Group
--
-- DESCRIPTION: This Group contains Subnet Management Information
--    about the Management Port (InfiniBand Port 0).
--****************************************************************

ibSmaMgmtPortInfo OBJECT IDENTIFIER ::= { ibSmaObjects 4 }

ibSmaPortMKey OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(8))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The 8-byte management key that is kept locally for the
       management port.  If the value is 0's, no authentication
       is done."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo.  Also
       see Section 14.2.4."
   ::= { ibSmaMgmtPortInfo 1 }

ibSmaPortGidPrefix OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE(8))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "GID prefix for this port."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 2 }

ibSmaPortLid OBJECT-TYPE
   SYNTAX Unsigned32(0..49151)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The base LID of this port."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 3 }

ibSmaPortMasterSmLid OBJECT-TYPE
   SYNTAX Unsigned32(0..49151)
   MAX-ACCESS read-only
   STATUS current

Expires March 2006                                             [Page 21]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "The LID of the master SM that is managing this port."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 4 }

ibSmaPortIsSubnetManager OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Subnet Manager?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 5 }

ibSmaPortIsNoticeSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Are Notices Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 6 }

ibSmaPortIsTrapSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Are IBA Traps Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 7 }

ibSmaPortIsAutoMigrateSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Automatic Migration
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 8 }

ibSmaPortIsSlMappingSupported OBJECT-TYPE

Expires March 2006                                             [Page 22]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is SL Mapping Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 9 }

ibSmaPortIsMKeyNvram OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is M_Key in NVRAM?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 10 }

ibSmaPortIsPKeyNvram OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is P_Key in NVRAM?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 11 }

ibSmaPortIsLedInfoSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is LED Information
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 12 }

ibSmaPortIsSmDisabled OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Subnet Manager Disabled?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."

Expires March 2006                                             [Page 23]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   ::= { ibSmaMgmtPortInfo 13 }

ibSmaPortIsSysImgGuidSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is System Image GUID Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 14 }

ibSmaPortIsPKeyExtPortTrapSup OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is P_Key Switch External Port
       Trap supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 15 }

ibSmaPortIsCommManageSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Communication Management
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 16 }

ibSmaPortIsSnmpTunnelSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is SNMP Tunneling
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 17 }

ibSmaPortIsReinitSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current

Expires March 2006                                             [Page 24]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "Capability flag for this node: Is Reinitialization Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 18 }

ibSmaPortIsDevManageSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Device Management
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 19 }

ibSmaPortIsVendorClassSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Vendor Class Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 20 }

ibSmaPortIsDrNoticeSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is DR Notice Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 21 }

ibSmaPortIsCapMaskNoticSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Capability Mask Notice
       Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 22 }


Expires March 2006                                             [Page 25]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaPortIsBootMgmtSupported OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Capability flag for this node: Is Boot Management Supported?"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 23 }

ibSmaPortMKeyLeasePeriod OBJECT-TYPE
   SYNTAX Unsigned32(0..65535)
   UNITS "seconds"
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the initial value of the lease period timer (in
       seconds).  The lease period is the length of time that the
       M_Key Protection bits are to remain non-zero after a
       SubnSet(PortInfo) fails the M_Key authentication check.
       When the value is 0, the lease period shall never expire."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section
       14.2.4.2."
   ::= { ibSmaMgmtPortInfo 24 }

ibSmaPortMKeyProtectBits OBJECT-TYPE
   SYNTAX INTEGER {
                  noMKeyProtection(1),
                  succeedWithReturnKey(2),
                  succeedWithReturnZeroes(3),
                  failOnNoMatch(4)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Management Key (M_Key) protection bits."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1. Section 14.2.5.6;
       Table 132 PortInfo; Also Section 14.2.4.1; Table 115 explains
       the Protection Levels."
   ::= { ibSmaMgmtPortInfo 25 }

ibSmaPortMasterSmSl OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The administrative Service Level of the master SM that
       is managing this port."
   REFERENCE

Expires March 2006                                             [Page 26]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 26 }

ibSmaPortInitTypeLoad OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The initialization type flags indicate the type of
       initialization requested by this port before SM moves it
       to Active or Armed state.

       Initialization Type flag: NoLoad.  If the value is false(2),
       the attributes should be initialized.  If the value is true(1),
       no data should be loaded into the attributes at all, asserting
       that the last-loaded data still exists and is valid."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 27 }

ibSmaPortInitTypeContent OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Initialization Type flag: PreserveContent.  If the value is
       false(2), the port makes no request regarding the content
       of the data that is loaded into its attributes.  If it is
       true(1), the port is requesting that all such data, if loaded,
       be set to the most recent content loaded by the SM."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 28 }

ibSmaPortInitTypePresence OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Initialization Type flag: PreservePresence.  If the value is
       false(2), the port is requesting that all settable SA attributes
       referencing this port be removed prior to activating this port
       and Traps 64/65 be sent.  If the value is true(1), the port is
       requesting that all such data be preserved, and that the traps
       not be sent."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 29 }


Expires March 2006                                             [Page 27]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaPortInitTypeResuscitate OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Initialization Type flag: DoNotResuscitate.  If the value is
       false(2), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and
       ibSmaPortInitTypePresence ARE valid.  If the value is true(1),
       ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and
       ibSmaPortInitTypePresence ARE NOT valid.  The port is requesting
       that reinitialization of this port and the in/out of service
       traps (64/65) be delayed until this flag is set to false(1)."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 30 }

ibSmaPortInitNoLoadReply OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The Init Reply flags are written by the SM prior to
       changing the port to Active or Armed state.

       Initialization Type Reply flag: NoLoadReply.  If this value
       is false(2), the port attributes were initialized.  If the
       value is true(1), no data was loaded into the port attributes."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 31 }

ibSmaPortInitPreserveContReply OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Initialization Type flag: PreserveContentReply.  If this value
       is false(2), no information is available regarding the content
       of the data loaded into the port attributes.  If the value is
       true(1), the data loaded into the port attributes was set
       to the content most recently loaded by the SM."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 32 }

ibSmaPortInitPreservePresReply OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION

Expires March 2006                                             [Page 28]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "Initialization Type Reply flag: PreservePresenceReply.  If this
       value is false(2), all settable SA attributes referencing this
       port were removed prior to activating this port and the in/out
       service traps 64 and 65 were sent.  If the value is true(1),
       all such data existing when this port was last active was not
       removed and the traps 64/65 were not sent."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 33 }

ibSmaPortMKeyViolations OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Counts the number of SMP packets that have been received at
       this port that have invalid M_Keys.  This object is a
       latching gauge, in that whenever the maximum gauge value is
       encountered (i.e., the count reaches all 1's), the SMA must
       reset the gauge to 0, before this object begins incrementing
       its count again."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 34 }

ibSmaPortPKeyViolations OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Counts the number of SMP packets that have been received at
       this port that have invalid P_Keys.  This object is a
       latching gauge, in that whenever the maximum gauge value is
       encountered (i.e., the count reaches all 1's), the SMA must
       reset the gauge to 0, before this object begins incrementing
       its count again."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section 10.9.4."
   ::= { ibSmaMgmtPortInfo 35 }

ibSmaPortQKeyViolations OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Counts the number of SMP packets that have been received at
       this port that have invalid Q_Keys.  This object is a
       latching gauge, in that whenever the maximum gauge value is
       encountered (i.e., the count reaches all 1's), the SMA must
       reset the gauge to 0, before this object begins incrementing

Expires March 2006                                             [Page 29]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       its count again."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also see Section
       10.2.4."
   ::= { ibSmaMgmtPortInfo 36 }

ibSmaPortNumGuid OBJECT-TYPE
   SYNTAX Unsigned32(0..255)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of GUID entries supported in the GUIDInfo attribute
       for this port found in the ibSmaGuidInfoTable."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 37 }

ibSmaPortSubnetTimeout OBJECT-TYPE
   SYNTAX Unsigned32(0..31)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the maximum expected subnet propagation delay,
       which depends upon the configuration of the switches, to
       reach any other port in the subnet and shall also be used
       to determine the maximum rate which SubnTraps() can be sent
       from this port by the SMA."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 38 }

ibSmaPortResponseTimeValue OBJECT-TYPE
   SYNTAX Unsigned32(0..31)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the expected maximum time between the port reception
       of a SMP and the transmission of the associated
       response."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaMgmtPortInfo 39 }

--****************************************************************
-- PortInfo InfiniBand Data Port Group
--
-- DESCRIPTION: This Group contains a table that contains the Subnet
--    Management Information about each InfiniBand data port.
--****************************************************************

Expires March 2006                                             [Page 30]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaDataPortInfo OBJECT IDENTIFIER ::= { ibSmaObjects 5 }

ibSmaPortInfoTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaPortInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing SMA PortInfo information."
   ::= { ibSmaDataPortInfo 1 }

ibSmaPortInfoEntry OBJECT-TYPE
   SYNTAX IbSmaPortInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaPortInfoTable containing
       information about a particular data port and its attributes."
   INDEX { ibSmaPortIndex }
   ::= { ibSmaPortInfoTable 1 }

IbSmaPortInfoEntry ::= SEQUENCE {
   ibSmaPortIndex IbDataPort,
   ibSmaPortLinkWidthEnabled INTEGER,
   ibSmaPortLinkWidthSupported INTEGER,
   ibSmaPortLinkWidthActive INTEGER,
   ibSmaPortLinkSpeedSupported INTEGER,
   ibSmaPortLinkState INTEGER,
   ibSmaPortPhysState INTEGER,
   ibSmaPortLinkDownDefaultState INTEGER,
   ibSmaPortLidMaskCount Unsigned32,
   ibSmaPortLinkSpeedActive INTEGER,
   ibSmaPortLinkSpeedEnabled INTEGER,
   ibSmaPortNeighborMtu INTEGER,
   ibSmaPortVirtLaneSupport INTEGER,
   ibSmaPortVlHighPriorityLimit Unsigned32,
   ibSmaPortVlArbHighCapacity Unsigned32,
   ibSmaPortVlArbLowCapacity Unsigned32,
   ibSmaPortMtuCapacity INTEGER,
   ibSmaPortVlStallCount Unsigned32,
   ibSmaPortHeadOfQueueLife Unsigned32,
   ibSmaPortOperationalVls INTEGER,
   ibSmaPortPartEnforceInbound TruthValue,
   ibSmaPortPartEnforceOutbound TruthValue,
   ibSmaPortFilterRawPktInbound TruthValue,
   ibSmaPortFilterRawPktOutbound TruthValue,
   ibSmaPortLocalPhysErrorThreshold Unsigned32,
   ibSmaPortOverrunErrorThreshold Unsigned32
   }

ibSmaPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current

Expires March 2006                                             [Page 31]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "Index that identifies the InfiniBand data port."
   ::= { ibSmaPortInfoEntry 1 }

ibSmaPortLinkWidthEnabled OBJECT-TYPE
   SYNTAX INTEGER {
                  oneX(1),
                  fourX(2),
                  oneXOr4X(3),
                  twelveX(4),
                  oneXOr12X(5),
                  fourXOr12X(6),
                  oneX4XOr12X(7),
                  linkWidthSupported(8),
                  other(9)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Enabled link width, indicated as follows:
       0: No State Change (NOP)
       1: 1x
       2: 4x
       3: 1x or 4x
       8: 12x
       9: 1x or 12x
       10: 4x or 12x
       11: 1x, 4x or 12x
       4 - 7, 12 - 254: Reserved (Ignored)
       255: Set to LinkWidthSupported value."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 2 }

ibSmaPortLinkWidthSupported OBJECT-TYPE
   SYNTAX INTEGER {
                  oneX(1),
                  oneXOr4X(2),
                  oneX4XOr12X(3),
                  other(4)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Supported link width for this port.
       This is indicated as follows by the SMA:
            1: 1x
            3: 1x or 4x
            11: 1x, 4x or 12x
            0, 2, 4-10, 12-255: Reserved."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.

Expires March 2006                                             [Page 32]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 3 }

ibSmaPortLinkWidthActive OBJECT-TYPE
   SYNTAX INTEGER {
                  oneX(1),
                  fourX(2),
                  twelveX(3),
                  other(4)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Currently active link width on this port.
       This is indicated as follows by the SMA:
            1: 1x
            2: 4x
            8: 12x
            0, 3, 4-7, 9-255: Reserved."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 4 }

ibSmaPortLinkSpeedSupported OBJECT-TYPE
   SYNTAX INTEGER {
                  twoPoint5Gbps(1),
                  other(2)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Supported link speed, indicated as follows:
            1: 2.5Gbps
            0, 2 - 15: reserved "
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 5 }

ibSmaPortLinkState OBJECT-TYPE
   SYNTAX INTEGER {
                  down(1),
                  init(2),
                  armed(3),
                  active(4),
                  other(5)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The state of the link on this port.
            0: No state change

Expires March 2006                                             [Page 33]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


            1: Down (includes failed links)
            2: Initialize
            3: Armed
            4: Active
            5-15: Reserved"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 6 }

ibSmaPortPhysState OBJECT-TYPE
   SYNTAX INTEGER {
                  sleep(1),
                  polling(2),
                  disabled(3),
                  portConfigTraining(4),
                  linkUp(5),
                  linkErrorRecovery(6),
                  other(7)
                  }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "Physical Port State. Enumerated as:
            0: No state change
            1: Sleep
            2: Polling
            3: Disabled
            4: PortConfigurationTraining
            5: LinkUp
            6: LinkErrorRecovery
            7 - 15: Reserved"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 7 }

ibSmaPortLinkDownDefaultState OBJECT-TYPE
   SYNTAX INTEGER {
                  sleep(1),
                  polling(2),
                  other(3)
                    }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "LinkDownDefault-State
          0: No state change
          1: Sleep
          2: Polling
          3-15: Reserved"
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.

Expires March 2006                                             [Page 34]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 8 }

ibSmaPortLidMaskCount OBJECT-TYPE
   SYNTAX Unsigned32(0..7)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "LID Mask Control count for multipath support for CA
       and router ports."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo.  Also Section
       7.11.1 Multipathing Requirements on End Node."
   ::= { ibSmaPortInfoEntry 9 }

ibSmaPortLinkSpeedActive OBJECT-TYPE
   SYNTAX INTEGER {
                  twoPoint5Gbps(1),
                  other(2)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Currently active link speed, indicated as follows:
            1: 2.5Gbps
            0, 2 - 15: reserved."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 10 }

ibSmaPortLinkSpeedEnabled OBJECT-TYPE
   SYNTAX INTEGER {
                  twoPoint5Gbps(1),
                  linkSpeedSupported(2),
                  other(3)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
       "Enabled link speed, indicated as follows:
          0: No State Change (NOP)
          1: 2.5 Gbps
          2 - 14: Reserved (Ignored)
          15: Set to LinkSpeedSupported value."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 11 }

ibSmaPortNeighborMtu OBJECT-TYPE
   SYNTAX INTEGER {

Expires March 2006                                             [Page 35]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


                   mtu256(1),
                   mtu512(2),
                   mtu1024(3),
                   mtu2048(4),
                   mtu4096(5),
                   other(6)
                   }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
       "Active maximum MTU enabled on this port for transmit:
           1: 256 bytes
           2: 512 bytes
           3: 1024 bytes
           4: 2048 bytes
           5: 4096 bytes
           0, 6 - 15: reserved "
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 12 }

ibSmaPortVirtLaneSupport OBJECT-TYPE
   SYNTAX INTEGER {
                vl0(1),
                vl0ToVl1(2),
                vl0ToVl3(3),
                vl0ToVl7(4),
                vl0ToVl14(5),
                other(6)
                }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Virtual Lane configuration supported on this port.
       Indicated as follows by the SMA:
           1: VL0
           2: VL0, VL1
           3: VL0 - VL3
           4: VL0 - VL7
           5: VL0 - VL14
           0, 6 - 15: reserved."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 13 }

ibSmaPortVlHighPriorityLimit OBJECT-TYPE
   SYNTAX Unsigned32(0..255)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Limit of High Priority component of VL Arbitration Table.

Expires March 2006                                             [Page 36]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       This object indicates the amount of high priority packets
       that can be transmitted without an opportunity to send a
       low priority packet.  Specifically, the number of bytes
       that can be sent is this value times 4K bytes.  A 255 value
       means the byte limit is unbounded and a value of 0 means
       that only a single packet from the high-priority table
       may be sent before an opportunity is given to the
       low-priority table."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; See also Section 7.6.9."
   ::= { ibSmaPortInfoEntry 14 }

ibSmaPortVlArbHighCapacity OBJECT-TYPE
   SYNTAX Unsigned32(0..64)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "VL/Weight pairs supported on this port in the VLArbitration
       table (ibSmaHiPriVlArbTable) for high priority. Shall be 1
       to 64 if more than one data VL is supported on this port, 0
       otherwise."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section 7.6.9."
   ::= { ibSmaPortInfoEntry 15 }

ibSmaPortVlArbLowCapacity OBJECT-TYPE
   SYNTAX Unsigned32(0..64)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "VL/Weight pairs supported on this port in the VLArbitration
       table (ibSmaLoPriVlArbTable) for low priority.  Shall be N to 64
       if more than one data VL is supported on this port, 0 otherwise,
       N being the number of data VLs supported."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also see Section 7.6.9."
     ::= { ibSmaPortInfoEntry 16 }

ibSmaPortMtuCapacity OBJECT-TYPE
   SYNTAX INTEGER {
                  mtu256(1),
                  mtu512(2),
                  mtu1024(3),
                  mtu2048(4),
                  mtu4096(5),
                  other(6)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION

Expires March 2006                                             [Page 37]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "Maximum MTU supported by this port.
           1: 256 bytes
           2: 512 bytes
           3: 1024 bytes
           4: 2048 bytes
           5: 4096 bytes
           0, 6 - 15: reserved "
   REFERENCE
     "InfiniBand Architecture Release 1.1. Vol. 1.
      Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 17 }

ibSmaPortVlStallCount OBJECT-TYPE
   SYNTAX Unsigned32(0..7)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Specifies the number of sequential packets dropped that
       causes the port to enter the VLStalled state.  The result
       of setting this value to 0 is undefined."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Section 18.2.4.4."
   ::= { ibSmaPortInfoEntry 18 }

ibSmaPortHeadOfQueueLife OBJECT-TYPE
   SYNTAX Unsigned32(0..20)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Sets the time a packet can live at the head of a
       Virtual Lane queue. This variable (HL) is used to
       compute the Head of the Queue Lifetime Limit (HLL).
       It is used in the formula when the HL value is between
       0 and 19, inclusive.  When HL is greater than 19, the
       HLL is to be interpreted as infinite."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section 18.2.5.4."
   ::= { ibSmaPortInfoEntry 19 }

ibSmaPortOperationalVls OBJECT-TYPE
   SYNTAX INTEGER {
                vl0(1),
                vl0ToVl1(2),
                vl0ToVl3(3),
                vl0ToVl7(4),
                vl0ToVl14(5),
                other(6)
                }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION

Expires March 2006                                             [Page 38]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "Virtual Lanes operational on this port, indicated
       as follows:
            0: No change
            1: VL0
            2: VL0 - VL1
            3: VL0 - VL3
            4: VL0 - VL7
            5: VL0 - VL14
            6 - 15: reserved"
   REFERENCE
     "InfiniBand Architecture Release 1.1. Vol. 1.
      Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 20 }

ibSmaPortPartEnforceInbound OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Indicates support of optional inbound partition enforcement.
       If true, partition enforcement on packets received on this
       port is enabled.  If false partition enforcement on
       packets received from this port is disabled."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 21 }

ibSmaPortPartEnforceOutbound OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Indicates support of optional outbound partition
       enforcement.  If true, partition enforcement on packets
       transmitted on this port is enabled.  If false partition
       enforcement on packets transmitted from this port is
       disabled."
   REFERENCE
   "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 22 }

ibSmaPortFilterRawPktInbound OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Indicates support of optional inbound raw packet
       enforcement.  If true, raw packets arriving on this port
       are discarded.  If false, raw enforcement on packets received
       from this port is disabled."
   REFERENCE

Expires March 2006                                             [Page 39]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 23 }

ibSmaPortFilterRawPktOutbound OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Indicates support of optional outbound raw packet
       enforcement.  If true, raw packets departing on this port
       are discarded.  If false, raw enforcement on packets leaving
       from this port is disabled."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo."
   ::= { ibSmaPortInfoEntry 24 }

ibSmaPortLocalPhysErrorThreshold OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Local Physical Error threshold value.  When the count of
       marginal link errors exceeds this threshold, the local
       link integrity error shall be detected."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section 7.12.2."
   ::= { ibSmaPortInfoEntry 25 }

ibSmaPortOverrunErrorThreshold OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Overrun error threshold value.  When the count of buffer
       overruns over consecutive flow control update periods
       exceeds this threshold, the excessive buffer overrun
       error shall be detected."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo; Also Section 7.12.2."
   ::= { ibSmaPortInfoEntry 26 }


--****************************************************************
-- The Partition Key Group
--****************************************************************
ibSmaPKeyInfo OBJECT IDENTIFIER ::= { ibSmaObjects 6 }




Expires March 2006                                             [Page 40]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


-- *************************************************************
-- The Partition Key (P_Key) Table
--
-- DESCRIPTION: This table contains SMA information about the
--    Partition Key Table.
-- *************************************************************

ibSmaPKeyTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaPKeyEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "This table contains SMA Partition Key information for
       this port."
   ::= { ibSmaPKeyInfo 1 }

ibSmaPKeyEntry OBJECT-TYPE
   SYNTAX IbSmaPKeyEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaPKeyTable containing
       information about the partition keys."
   INDEX { ibSmaPKeyIBAPortIndex, ibSmaPKeyIndex }
   ::= { ibSmaPKeyTable 1 }

IbSmaPKeyEntry ::= SEQUENCE {
    ibSmaPKeyIBAPortIndex IbDataPortAndInvalid,
    ibSmaPKeyIndex Unsigned32,
    ibSmaPKeyMembership INTEGER,
    ibSmaPKeyBase Unsigned32
}

ibSmaPKeyIBAPortIndex OBJECT-TYPE
   SYNTAX IbDataPortAndInvalid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The IB data port index for the switch data ports.
       For switch management port 0 and for CAs and routers,
       the index value should be 255.  This indicates that
       the entry is not referring to a valid switch
       data port."
   ::= { ibSmaPKeyEntry 1 }

ibSmaPKeyIndex OBJECT-TYPE
   SYNTAX Unsigned32(0..65504)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The entry Identifier for each Partition Key
       defined on a port.  (The IB spec specifies 0..2047
       blocks of 32 entries each for a total of 65,504 maximum

Expires March 2006                                             [Page 41]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       entries, although the implemented limit is defined by
       PartitionCap for CAs, routers, and switch port 0,
       and by PartitionEnforcementCap for the switch data
       ports)."
   ::= { ibSmaPKeyEntry 2 }

ibSmaPKeyMembership OBJECT-TYPE
   SYNTAX INTEGER {
                  none(1),
                  limited(2),
                  full(3)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "If the P_Key type is limited(2), the switch may accept a
       packet with a matching full P_Key, but may not accept a
       packet with a matching limited key.  If the P_Key type
       is full(3), the switch can accept packets with either a
       full or limited P_Key.  If the P_Key type is none(1),
       there is no associated Key Base value."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.7; Table 134 P_KeyTable and
       Table 135 P_Key Block Element."
   ::= { ibSmaPKeyEntry 3 }

ibSmaPKeyBase OBJECT-TYPE
   SYNTAX Unsigned32(0..65527)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "15-bit base value of the P_Key that the switch will use to
       check against incoming packets."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.7; Table 134 P_KeyTable and
       Table 135 P_Key Block Element."
   ::= { ibSmaPKeyEntry 4 }

--****************************************************************
-- The Service-Level-to-Virtual-Lane-Mapping Group
--****************************************************************
ibSmaSlToVlMapInfo OBJECT IDENTIFIER ::= { ibSmaObjects 7 }

-- *************************************************************
-- The Service Level to Virtual Lane Configuration Mapping Table
--
-- DESCRIPTION: This table reflects the current Service Level
--    value for the input port/output port/virtual lane.
-- *************************************************************

ibSmaSL2VLMapTable OBJECT-TYPE

Expires March 2006                                             [Page 42]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   SYNTAX SEQUENCE OF IbSmaSL2VLMapEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "This table provides the virtual lane value for the
       output port/input port/service level mapping.
       Each output port contains a VL mapping for the
       next hop based on the input port the packet arrived
       on and its SL value."
   ::= { ibSmaSlToVlMapInfo 1 }

ibSmaSL2VLMapEntry OBJECT-TYPE
   SYNTAX IbSmaSL2VLMapEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Column definitions for the VL from output/input/SL entry."
   INDEX { ibSmaIBAOutPortIndex, ibSmaIBAInPortIndex,
           ibSmaServiceLevelIndex }
   ::= { ibSmaSL2VLMapTable 1 }

IbSmaSL2VLMapEntry ::= SEQUENCE {
   ibSmaIBAOutPortIndex IbDataPortAndInvalid,
   ibSmaIBAInPortIndex IbDataPortAndInvalid,
   ibSmaServiceLevelIndex Unsigned32,
   ibSmaVirtualLane Unsigned32
   }

ibSmaIBAOutPortIndex OBJECT-TYPE
   SYNTAX IbDataPortAndInvalid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The egress port index for the service level mapping.  A
       value of 255 indicates the switch management port 0."
   ::= { ibSmaSL2VLMapEntry 1 }

ibSmaIBAInPortIndex OBJECT-TYPE
   SYNTAX IbDataPortAndInvalid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The ingress port index for the service level mapping.  A
       value of 255 indicates the switch management port 0."
   ::= { ibSmaSL2VLMapEntry 2 }

ibSmaServiceLevelIndex OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The Service Level value index for this mapping."
   ::= { ibSmaSL2VLMapEntry 3 }

Expires March 2006                                             [Page 43]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaVirtualLane OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The outgoing packet's Virtual Lane value for
       this Service Level Mapping."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.8.; Table 136 SLtoVLMappingTable."
   ::= { ibSmaSL2VLMapEntry 4 }

--****************************************************************
-- The Virtual Lane Arbitration Group
--****************************************************************
ibSmaVLArbitInfo OBJECT IDENTIFIER ::= { ibSmaObjects 8 }

-- *************************************************************
-- The Virtual Lane High Priority Arbitration Table
--
-- DESCRIPTION: This table contains the VL High Priority
--    Arbitration Table.  The second index is the list index
--    that allows for the viewing of the configuration of the
--    VL/weight pairs configured by the SM.
-- *************************************************************

ibSmaHiPriVlArbTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaHiPriVlArbEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "This table provides visibility into the High Priority
       Arbitration process for configuring VL/Weight pairs for
       the IB data ports."
   ::= { ibSmaVLArbitInfo 1 }

ibSmaHiPriVlArbEntry OBJECT-TYPE
   SYNTAX IbSmaHiPriVlArbEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Column definitions for High Priority Arbitration Table."
   INDEX { ibSmaHiPriIBAPortIndex, ibSmaHiPriNIndex }
   ::= { ibSmaHiPriVlArbTable 1 }

IbSmaHiPriVlArbEntry ::= SEQUENCE {
   ibSmaHiPriIBAPortIndex IbDataPort,
   ibSmaHiPriNIndex Unsigned32,
   ibSmaHiPriVirtLane Unsigned32,
   ibSmaHiPriWeight Unsigned32
}



Expires March 2006                                             [Page 44]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaHiPriIBAPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The index for the configured IBA port."
   ::= { ibSmaHiPriVlArbEntry 1 }

ibSmaHiPriNIndex OBJECT-TYPE
   SYNTAX Unsigned32(1..64)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The High Priority list index."
    ::= { ibSmaHiPriVlArbEntry 2 }

ibSmaHiPriVirtLane OBJECT-TYPE
   SYNTAX Unsigned32(0..14)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The virtual lane this entry applies to."
   ::= { ibSmaHiPriVlArbEntry 3 }

ibSmaHiPriWeight OBJECT-TYPE
   SYNTAX Unsigned32(0..255)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of 64-byte units that may be transmitted from this
       VL when its turn in the arbitration process occurs.  A weight
       of 0 indicates that the entry should be skipped."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.9; Table 137 VLArbitrationTable."
   ::= { ibSmaHiPriVlArbEntry 4 }

-- *************************************************************
-- The Virtual Lane Low Priority Arbitration Table
--
-- DESCRIPTION: This table contains the VL Low Priority Arbitration
--    Table.  The second index is the list index that allows for the
--    viewing of the configuration of the VL/weight pairs done by SM.
-- *************************************************************

ibSmaLowPriVlArbTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaLowPriVlArbEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "This table provides visibility into the Low Priority
       Arbitration process."
   ::= { ibSmaVLArbitInfo 2 }

Expires March 2006                                             [Page 45]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaLowPriVlArbEntry OBJECT-TYPE
   SYNTAX IbSmaLowPriVlArbEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
     "Column definitions for Low Priority Arbitration Table."
   INDEX { ibSmaLowPriIBAPortIndex, ibSmaLowPriNIndex }
   ::= { ibSmaLowPriVlArbTable 1 }

IbSmaLowPriVlArbEntry ::= SEQUENCE {
   ibSmaLowPriIBAPortIndex IbDataPort,
   ibSmaLowPriNIndex Unsigned32,
   ibSmaLowPriVirtLane Unsigned32,
   ibSmaLowPriWeight Unsigned32
}

ibSmaLowPriIBAPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The index for the configured IB data port."
   ::= { ibSmaLowPriVlArbEntry 1 }

ibSmaLowPriNIndex OBJECT-TYPE
   SYNTAX Unsigned32(1..64)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The Low Priority list index."
   ::= { ibSmaLowPriVlArbEntry 2 }

ibSmaLowPriVirtLane OBJECT-TYPE
   SYNTAX Unsigned32(0..14)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
     "The Virtual Lane this entry applies to."
   ::= { ibSmaLowPriVlArbEntry 3 }

ibSmaLowPriWeight OBJECT-TYPE
   SYNTAX Unsigned32(0..255)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Number of 64-byte units that may be transmitted from this VL
       when its turn in the arbitration process occurs.  A weight
       of 0 indicates that the entry should be skipped."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.9; Table 137 VLArbitrationTable."
   ::= { ibSmaLowPriVlArbEntry 4 }


Expires March 2006                                             [Page 46]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


--****************************************************************
-- The Linear Forwarding Group
--****************************************************************
ibSmaLFTInfo OBJECT IDENTIFIER ::= { ibSmaObjects 9 }

--****************************************************************
-- Linear Forwarding Table Group: ibSmaLinForTable
--
-- DESCRIPTION: This table contains information about the Linear
--    Forwarding Table.
--****************************************************************

ibSmaLinForTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaLinForEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing information about the Linear Forwarding
       Table."
   ::= { ibSmaLFTInfo 1 }

ibSmaLinForEntry OBJECT-TYPE
   SYNTAX IbSmaLinForEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Current unicast forwarding Table entry configured by the
       Subnet Manager based on destination LID."
   INDEX { ibSmaLinDestDLIDIndex }
   ::= { ibSmaLinForTable 1 }

IbSmaLinForEntry ::= SEQUENCE {
   ibSmaLinDestDLIDIndex IbUnicastLid,
   ibSmaLinForwEgressPort IbDataPortAndInvalid
}

ibSmaLinDestDLIDIndex OBJECT-TYPE
   SYNTAX IbUnicastLid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Index that identifies Destination Local Identifier (DLID)
       that the forwarding entry refers to in the Linear Forwarding
       Table."
   REFERENCE
       "InfiniBand Architecture Release 1.1 Vol. 1.
        Section 14.2.5.10 LinearForwardingTable; Table 139 and
        Table 140."
   ::= { ibSmaLinForEntry 1 }

ibSmaLinForwEgressPort OBJECT-TYPE
   SYNTAX IbDataPortAndInvalid
   MAX-ACCESS read-only

Expires March 2006                                             [Page 47]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   STATUS current
   DESCRIPTION
      "The port to which packets with the LID corresponding to
       this entry are to be forwarded."
   REFERENCE
       "InfiniBand Architecture Release 1.1 Vol. 1.
        Section 14.2.5.10 LinearForwardingTable; Table 139 and
        Table 140."
   ::= { ibSmaLinForEntry 2 }

--****************************************************************
-- The Random Forwarding Group
--****************************************************************
ibSmaRFTInfo OBJECT IDENTIFIER ::= { ibSmaObjects 10 }

--****************************************************************
-- Random Forwarding Table
--
-- DESCRIPTION: This Table contains Subnet Management Information
--    about the Random Forwarding Table.
--****************************************************************

ibSmaRandomForwardingTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaRandomForwardingEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing SMA Random Forwarding information."
   ::= { ibSmaRFTInfo 1 }

ibSmaRandomForwardingEntry OBJECT-TYPE
   SYNTAX IbSmaRandomForwardingEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaRandomForwardingTable
       containing information about the Random Forwarding Table."
   INDEX   { ibSmaRandomForwardingPortIndex }
   ::= { ibSmaRandomForwardingTable 1 }

IbSmaRandomForwardingEntry ::= SEQUENCE {
   ibSmaRandomForwardingPortIndex IbDataPort,
   ibSmaRandomDestLID Unsigned32,
   ibSmaRandomForwEgressPort IbDataPort,
   ibSmaRandomLMC Unsigned32,
   ibSmaRandomIsValid TruthValue
}

ibSmaRandomForwardingPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION

Expires March 2006                                             [Page 48]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      "The port index value."
   ::= { ibSmaRandomForwardingEntry 1 }

ibSmaRandomDestLID OBJECT-TYPE
   SYNTAX Unsigned32(1..49152)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Identifies Destination Local Identifier (DLID) that the
       forwarding entry refers to."
   REFERENCE
       "InfiniBand Architecture Release 1.1. Vol. 1.
        Section 14.2.5.11 RandomForwardingTable; Table 141 and
        Table 142."
   ::= { ibSmaRandomForwardingEntry 2 }

ibSmaRandomForwEgressPort OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The port to which packets with the LID corresponding to this
       entry are to be forwarded."
   REFERENCE
       "InfiniBand Architecture Release 1.1. Vol. 1.
        Section 14.2.5.11 RandomForwardingTable; Table 141 and
        Table 142."
   ::= { ibSmaRandomForwardingEntry 3 }

ibSmaRandomLMC OBJECT-TYPE
   SYNTAX Unsigned32(0..7)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The LID Mask Control (LMC) of this LID.  The LMC specifies
       the number of Path Bits in the Local Identifier."
   REFERENCE
       "InfiniBand Architecture Release 1.1. Vol. 1.
        Section 14.2.5.11 RandomForwardingTable; Table 141 and
        Table 142."
   ::= { ibSmaRandomForwardingEntry 4 }

ibSmaRandomIsValid OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "If true, this LID/Port pair is valid.  Note that when the SMA
       sets this parameter to false(2), entries can be removed."
   REFERENCE
       "InfiniBand Architecture Release 1.1. Vol. 1.
        Section 14.2.5.11 RandomForwardingTable; Table 141 and
        Table 142."

Expires March 2006                                             [Page 49]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   ::= { ibSmaRandomForwardingEntry 5 }

--****************************************************************
-- The Multicast Forwarding Group
--****************************************************************
ibSmaMFTInfo          OBJECT IDENTIFIER ::= { ibSmaObjects 11 }

--****************************************************************
-- Multicast Forwarding Table Group: ibMulForTable
--
-- DESCRIPTION: This table contains information about the Multicast
--    Forwarding Table.
--****************************************************************

ibSmaMulForTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaMulForEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing information about the Multicast Forwarding
       Table."
   ::= { ibSmaMFTInfo 1 }

ibSmaMulForEntry OBJECT-TYPE
   SYNTAX IbSmaMulForEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Current multicast forwarding table entry as configured by the
       Subnet Manager based on destination LID."
   INDEX { ibSmaMulDestDLIDIndex }
   ::= { ibSmaMulForTable 1 }

IbSmaMulForEntry ::= SEQUENCE {
   ibSmaMulDestDLIDIndex IbMulticastLid,
   ibSmaMulForwMask IbSmPortList
}

ibSmaMulDestDLIDIndex OBJECT-TYPE
   SYNTAX IbMulticastLid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Identifies Destination Local Identifier (DLID) that the
       forwarding entry refers to in the Multicast Forwarding Table."
   ::= { ibSmaMulForEntry 1 }

ibSmaMulForwMask OBJECT-TYPE
   SYNTAX IbSmPortList
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "A 256-bit mask that represents the port list.  An incoming

Expires March 2006                                             [Page 50]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       packet with this LID table entry will be forwarded to all
       ports for which the bit in the port mask is set to 1."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.12 MulticastForwardingTable; Table 143 and
       Table 144."
   ::= { ibSmaMulForEntry 2 }

--****************************************************************
-- The Subnet Manager Info Group
--****************************************************************
ibSmaSMInfo OBJECT IDENTIFIER ::= { ibSmaObjects 12 }

--****************************************************************
-- Subnet Manager Information Table Group
--****************************************************************
ibSmaSubMgrInfo OBJECT IDENTIFIER ::= { ibSmaSMInfo 1 }

--****************************************************************
-- Subnet Manager Information Table
--
-- DESCRIPTION: This Table contains Subnet Management Information
--    about the Subnet Managers on this subnet.  This information
--    is available on a port where a Subnet Manager resides.
--    This information is used by SMs to exchange information
--    during subnet discovery and polling.
--****************************************************************

ibSmaSmInfoTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaSmInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing SMA Subnet Manager information."
   ::= { ibSmaSubMgrInfo 1 }

ibSmaSmInfoEntry OBJECT-TYPE
   SYNTAX IbSmaSmInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaSmInfoTable containing
       information about the Subnet Manager Table."
   INDEX   { ibSmaSmInfoPortIndex }
   ::= { ibSmaSmInfoTable 1 }

IbSmaSmInfoEntry ::= SEQUENCE {
   ibSmaSmInfoPortIndex IbDataPort,
   ibSmaSmGuid IbGuid,
   ibSmaSmSmKey OCTET STRING,
   ibSmaSmSmpCount Counter32,
   ibSmaSmPriority Unsigned32,
   ibSmaSmState INTEGER

Expires March 2006                                             [Page 51]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   }

ibSmaSmInfoPortIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The port index value."
   ::= { ibSmaSmInfoEntry 1 }

ibSmaSmGuid OBJECT-TYPE
   SYNTAX IbGuid
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The Port GUID of the port where the SM resides."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.13; Table 145 SMInfo Table."
   ::= { ibSmaSmInfoEntry 2 }

ibSmaSmSmKey OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(8))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Key for this SM. This is shown as zeroes unless the
       requesting SM is proven to be the master, or the
       requester is otherwise authenticated."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.13; Table 145 SMInfo Table."
   ::= { ibSmaSmInfoEntry 3 }

ibSmaSmSmpCount OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Counter that increments each time the SM issues an
       SMP or performs other management activities.  This
       counter is used as a heartbeat indicator by standby SMs."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.13; Table 145 SMInfo Table."
   ::= { ibSmaSmInfoEntry 4 }

ibSmaSmPriority OBJECT-TYPE
   SYNTAX Unsigned32(0..15)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Administratively assigned priority for this SM.  This

Expires March 2006                                             [Page 52]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       can be reset by master SM. 0 is the lowest priority.
       An out-of-band mechanism shall be provided to set this
       value. The default value SHALL be 0."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.13; Table 145 SMInfo Table."
   ::= { ibSmaSmInfoEntry 5 }

ibSmaSmState OBJECT-TYPE
   SYNTAX INTEGER
            {
            notActive(1),
            discovering(2),
            standby(3),
            master(4),
            unknown(5)
            }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Enumerated value indicating this SM's state.
       The InfiniBand enumeration values are:
       0 - not active
       1 - discovering
       2 - standby
       3 - master
       4-15 - reserved.
       Note: a value of reserved returns unknown(5)."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.13; Table 145 SMInfo Table."
   ::= { ibSmaSmInfoEntry 6 }

--****************************************************************
-- The Vendor Diagnostics Group
--****************************************************************
ibSmaVendDiagInfo OBJECT IDENTIFIER ::= { ibSmaObjects 13 }

--****************************************************************
-- Vendor Diagnostics Information Table
--
-- DESCRIPTION: This Table contains Subnet Management Information
--    about the Vendor Diagnostics.
--****************************************************************

ibSmaVendDiagInfoTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaVendDiagInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing SMA Vendor Diagnostic Info information."
   ::= { ibSmaVendDiagInfo 1 }


Expires March 2006                                             [Page 53]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaVendDiagInfoEntry OBJECT-TYPE
   SYNTAX IbSmaVendDiagInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaVendDiagInfoTable containing
       information about a particular data port's diagnostic status."
   INDEX { ibSmaVendDiagPortIndex }
   ::= { ibSmaVendDiagInfoTable 1 }


IbSmaVendDiagInfoEntry ::= SEQUENCE {
   ibSmaVendDiagPortIndex IbDataPortAndInvalid,
   ibSmaPortGenericDiagCode INTEGER,
   ibSmaPortVendorDiagCode Unsigned32,
   ibSmaPortVendorDiagIndexFwd TruthValue,
   ibSmaPortVendorDiagData OCTET STRING
   }

ibSmaVendDiagPortIndex OBJECT-TYPE
   SYNTAX IbDataPortAndInvalid
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Index that identifies the port for the diagnostics.  If the
       index value is 255, information about the management port
       is returned."
   ::= { ibSmaVendDiagInfoEntry 1 }

ibSmaPortGenericDiagCode OBJECT-TYPE
   SYNTAX INTEGER {
                  portReady(1),
                  performingSelfTest(2),
                  initializing(3),
                  softError(4),
                  hardError(5),
                  other(6)
                  }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "The generic portion of the Port Info Diagnostic code."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo.  Also see Section
       14.2.5.6.1; Table 133: Standard Encoding of DiagCode
       Bits 3-0."
   ::= { ibSmaVendDiagInfoEntry 2 }

ibSmaPortVendorDiagCode OBJECT-TYPE
   SYNTAX Unsigned32(0..2047)
   MAX-ACCESS read-only
   STATUS current

Expires March 2006                                             [Page 54]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "The vendor specific portion of the Port Info Diagnostic
       code."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo.  Also see Section
       14.2.5.6.1 and Figure 188."
   ::= { ibSmaVendDiagInfoEntry 3 }

ibSmaPortVendorDiagIndexFwd OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flag to control ibSmaPortVendorDiagData data buffer.  If
       this boolean is true(1), the data buffer contains meaningful
       vendor-supplied additional diagnostic information.  If this
       object is false(2), the buffer is empty."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.14 and Table 146 VendorDiag."
   ::= { ibSmaVendDiagInfoEntry 4 }

ibSmaPortVendorDiagData OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(124))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Data buffer that can contain additional vendor-specific
       diagnostic information.  The ibSmaPortVendorDiagIndexFwd flag
       controls whether this object contains meaningful data.  Note:
       in IB, this buffer comprises n number of 62 byte buffers.
       This object defines a buffer that can hold up to 2 of these
       IB chained buffers."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.6; Table 132 PortInfo.  Also see Section
       14.2.5.6.1 and Figure 188."
   ::= { ibSmaVendDiagInfoEntry 5 }

--****************************************************************
-- The LED Info Group
--****************************************************************
ibSmaLedInfo OBJECT IDENTIFIER ::= { ibSmaObjects 14 }

--****************************************************************
-- LED Information Table
--
-- DESCRIPTION: This Table contains Subnet Management Information
--    about the LEDs.  Note that a CA, router, or switch indicates
--    support for this attribute in the PortInfo::CapabilityMask
--    object.
--****************************************************************

Expires March 2006                                             [Page 55]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaLedInfoTable OBJECT-TYPE
   SYNTAX SEQUENCE OF IbSmaLedInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A table containing SMA LED Info information."
   ::= { ibSmaLedInfo 1 }

ibSmaLedInfoEntry OBJECT-TYPE
   SYNTAX IbSmaLedInfoEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "A conceptual row of the ibSmaLedInfoTable containing
       information about a particular data port's LED status."
   INDEX { ibSmaLedIndex }
   ::= { ibSmaLedInfoTable 1 }

IbSmaLedInfoEntry ::= SEQUENCE {
   ibSmaLedIndex IbDataPort,
   ibSmaLedState INTEGER
   }

ibSmaLedIndex OBJECT-TYPE
   SYNTAX IbDataPort
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "Index that identifies the IB data port with its LED."
   ::= { ibSmaLedInfoEntry 1 }

ibSmaLedState OBJECT-TYPE
   SYNTAX INTEGER
             {
             unknown(1),
             on(2),
             off(3)
             }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "State of the LED."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.15 LedInfo; Table 147 LedInfo Table."
   ::= { ibSmaLedInfoEntry 2 }

--****************************************************************
-- Notifications Group
--****************************************************************
ibSmaNotificationPrefix OBJECT IDENTIFIER ::= { ibSmaNotifications 0 }



Expires March 2006                                             [Page 56]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


--****************************************************************
-- Notifications
--
-- DESCRIPTION: The Notifications Group contains the set of SMA
--    Traps that will be translated into SNMP notifications and
--    sent to the registered NMS managers.
--****************************************************************

ibSmaPortLinkStateChange NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 128:
       Link State of at least one port of switch at <LIDADDR>
       has changed."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 120."
   ::= { ibSmaNotificationPrefix 1 }

ibSmaLinkIntegrityThresReached NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid,
      ibSmaNodePortNum
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 129:
       Local Link Integrity threshold reached at <LIDADDR><PORTNO>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 121."
   ::= { ibSmaNotificationPrefix 2 }

ibSmaExcessBuffOverrunThres NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid,
      ibSmaNodePortNum
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 130:
       Excessive Buffer Overrun threshold reached at
       <LIDADDR><PORTNO>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 121."
   ::= { ibSmaNotificationPrefix 3 }

Expires March 2006                                             [Page 57]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaFlowCntrlUpdateTimerExpire NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid,
      ibSmaNodePortNum
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 131:
       Switch Flow Control Update watchdog timer expired at
       <LIDADDR><PORTNO>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 121."
   ::= { ibSmaNotificationPrefix 4 }

ibSmaCapabilityMaskModified NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid,
      ibSmaNodeCapMask
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 144:
       The capability mask at <LIDADDR> has been modified to
       <CAPMASK>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 122."
   ::= { ibSmaNotificationPrefix 5 }

ibSmaSysImageGuidModified NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeLid,
      ibSmaSystemImageGuid
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 145:
       The System Image GUID at <LIDADDR> has been modified to
       <SYSTEMIMAGEGUID>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 123."
   ::= { ibSmaNotificationPrefix 6 }

ibSmaBadManagementKey NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeKey,
      ibSmaNodeLid,

Expires March 2006                                             [Page 58]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


      ibSmaNodeMethod,
      ibSmaNodeAttributeId,
      ibSmaNodeAttributeModifier
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 256:
       Bad M_Key, <KEY> from <LIDADDR> attempted <METHOD>
       with <ATTRIBUTEID> and <ATTRIBUTEMODIFIER>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 124."
   ::= { ibSmaNotificationPrefix 7 }

ibSmaBadPartitionKey NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeKey,
      ibSmaNodeLid,
      ibSmaNodeGid1,
      ibSmaNodeQueuePair1,
      ibSmaNodeLid2,
      ibSmaNodeGid2,
      ibSmaNodeQueuePair2,
      ibSmaNodeServiceLevel
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 257:
       Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to
       <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 125."
   ::= { ibSmaNotificationPrefix 8 }

ibSmaBadQueueKey NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeKey,
      ibSmaNodeLid,
      ibSmaNodeGid1,
      ibSmaNodeQueuePair1,
      ibSmaNodeLid2,
      ibSmaNodeGid2,
      ibSmaNodeQueuePair2,
      ibSmaNodeServiceLevel
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 258:
       Bad Q_Key, <KEY> from <LIDADDR1>/<GIDADDR1>/<QP1> to
       <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>."

Expires March 2006                                             [Page 59]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 125."
   ::= { ibSmaNotificationPrefix 9 }

ibSmaBadPKeyAtSwitchPort NOTIFICATION-TYPE
   OBJECTS
      {
      ibSmaNodeKey,
      ibSmaNodeLid,
      ibSmaNodeGid1,
      ibSmaNodeQueuePair1,
      ibSmaNodeLid2,
      ibSmaNodeGid2,
      ibSmaNodeQueuePair2,
      ibSmaNodeServiceLevel,
      ibSmaNodeSwitchLid,
      ibSmaNodeDataValid
      }
   STATUS current
   DESCRIPTION
      "This notification translates InfiniBand SMA Trap 259:
       Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to
       <LIDADDR2>/<GIDADDR2>/<QP2> on <SL> at switch <LIDADRR>
       external port <PORTNO>, where the validity of the fields
       is indicated by <DataValid>."
   REFERENCE
      "InfiniBand Architecture Release 1.1. Vol. 1.
       Section 14.2.5.1; Table 118 and 126."
   ::= { ibSmaNotificationPrefix 10 }

--****************************************************************
-- Module Conformance Statement
--
-- DESCRIPTION: The module conformance statement includes the
--    compliance statements and the units of conformance
--    section.
--****************************************************************
ibSmaCompliances OBJECT IDENTIFIER ::= { ibSmaConformance 1 }

ibSmaGroups OBJECT IDENTIFIER ::= { ibSmaConformance 2 }

--****************************************************************
-- Compliance Statements
--****************************************************************

ibSmaBasicNodeCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
      "The basic node implementation requirements for agents that
       support the IPOIB SMA MIB."
   MODULE -- this module
       MANDATORY-GROUPS {

Expires March 2006                                             [Page 60]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


                        ibSmaNodeGroup
                        }
   ::= { ibSmaCompliances 1 }

ibSmaFullSwitchCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
      "The full node implementation requirements for agents that
       support the IPOIB SMA MIB for InfiniBand switches."
   MODULE -- this module
       MANDATORY-GROUPS {
                        ibSmaNodeGroup,
                        ibSmaSwitchGroup,
                        ibSmaGuidGroup,
                        ibSmaMgmtPortGroup,
                        ibSmaDataPortGroup,
                        ibSmaPKeyGroup,
                        ibSmaSlToVlMapGroup,
                        ibSmaVLArbitGroup,
                        ibSmaLFTGroup,
                        ibSmaRFTGroup,
                        ibSmaMFTGroup,
                        ibSmaSMGroup,
                        ibSmaVendDiagGroup,
                        ibSmaLedGroup,
                        ibSmaNotificationsGroup
                        }
   ::= { ibSmaCompliances 2 }

ibSmaFullRouterCACompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
      "The full node implementation requirements for agents that
       support the IPOIB SMA MIB for InfiniBand CAs and routers."
   MODULE -- this module
       MANDATORY-GROUPS {
                        ibSmaNodeGroup,
                        ibSmaGuidGroup,
                        ibSmaMgmtPortGroup,
                        ibSmaDataPortGroup,
                        ibSmaPKeyGroup,
                        ibSmaSlToVlMapGroup,
                        ibSmaVLArbitGroup,
                        ibSmaSMGroup,
                        ibSmaVendDiagGroup,
                        ibSmaLedGroup,
                        ibSmaNotificationsGroup
                        }
   ::= { ibSmaCompliances 3 }

--****************************************************************
-- Units Of Conformance
--****************************************************************

Expires March 2006                                             [Page 61]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


ibSmaNodeGroup OBJECT-GROUP
   OBJECTS {
       ibSmaNodeString,
       ibSmaNodeBaseVersion,
       ibSmaNodeClassVersion,
       ibSmaNodeType,
       ibSmaNodeNumPorts,
       ibSmaSystemImageGuid,
       ibSmaNodeGuid,
       ibSmaNodePortGuid,
       ibSmaNodePartitionTableNum,
       ibSmaNodeDeviceId,
       ibSmaNodeRevision,
       ibSmaNodeLocalPortNumOrZero,
       ibSmaNodeVendorId,
       ibSmaNodeLid,
       ibSmaNodePortNum,
       ibSmaNodeMethod,
       ibSmaNodeAttributeId,
       ibSmaNodeAttributeModifier,
       ibSmaNodeKey,
       ibSmaNodeLid2,
       ibSmaNodeServiceLevel,
       ibSmaNodeQueuePair1,
       ibSmaNodeQueuePair2,
       ibSmaNodeGid1,
       ibSmaNodeGid2,
       ibSmaNodeCapMask,
       ibSmaNodeSwitchLid,
       ibSmaNodeDataValid
   }
   STATUS current
   DESCRIPTION
      "The ibSmaNodeGroup defines the MIB objects that describe
       this InfiniBand subnet node."
   ::= { ibSmaGroups 1 }

ibSmaSwitchGroup OBJECT-GROUP
   OBJECTS {
       ibSmaSwLinearFdbTableNum,
       ibSmaSwRandomFdbTableNum,
       ibSmaSwMulticastFdbTableNum,
       ibSmaSwLinearFdbTop,
       ibSmaSwDefaultPort,
       ibSmaSwDefMcastPriPort,
       ibSmaSwDefMcastNotPriPort,
       ibSmaSwLifeTimeValue,
       ibSmaSwPortStateChange,
       ibSmaSwLidsPerPort,
       ibSmaSwPartitionEnforceNum,
       ibSmaSwInboundEnforceCap,
       ibSmaSwOutboundEnforceCap,
       ibSmaSwFilterRawPktInputCap,

Expires March 2006                                             [Page 62]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       ibSmaSwFilterRawPktOutputCap,
       ibSmaSwEnhancedPort0
   }
   STATUS current
   DESCRIPTION
      "The ibSmaSwitchGroup defines the MIB objects that describe
       this InfiniBand switch."
   ::= { ibSmaGroups 2 }

ibSmaGuidGroup OBJECT-GROUP
   OBJECTS {
       ibSmaGuidVal
   }
   STATUS current
   DESCRIPTION
      "The ibSmaGuidGroup defines the MIB object that describes
       the GUIDs associated with this node."
::= { ibSmaGroups 3 }

ibSmaMgmtPortGroup OBJECT-GROUP
   OBJECTS {
       ibSmaPortMKey,
       ibSmaPortGidPrefix,
       ibSmaPortLid,
       ibSmaPortMasterSmLid,
       ibSmaPortIsSubnetManager,
       ibSmaPortIsNoticeSupported,
       ibSmaPortIsTrapSupported,
       ibSmaPortIsAutoMigrateSupported,
       ibSmaPortIsSlMappingSupported,
       ibSmaPortIsMKeyNvram,
       ibSmaPortIsPKeyNvram,
       ibSmaPortIsLedInfoSupported,
       ibSmaPortIsSmDisabled,
       ibSmaPortIsSysImgGuidSupported,
       ibSmaPortIsPKeyExtPortTrapSup,
       ibSmaPortIsCommManageSupported,
       ibSmaPortIsSnmpTunnelSupported,
       ibSmaPortIsReinitSupported,
       ibSmaPortIsDevManageSupported,
       ibSmaPortIsVendorClassSupported,
       ibSmaPortIsDrNoticeSupported,
       ibSmaPortIsCapMaskNoticSupported,
       ibSmaPortIsBootMgmtSupported,
       ibSmaPortMKeyLeasePeriod,
       ibSmaPortMKeyProtectBits,
       ibSmaPortMasterSmSl,
       ibSmaPortInitTypeLoad,
       ibSmaPortInitTypeContent,
       ibSmaPortInitTypePresence,
       ibSmaPortInitTypeResuscitate,
       ibSmaPortInitNoLoadReply,
       ibSmaPortInitPreserveContReply,

Expires March 2006                                             [Page 63]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       ibSmaPortInitPreservePresReply,
       ibSmaPortMKeyViolations,
       ibSmaPortPKeyViolations,
       ibSmaPortQKeyViolations,
       ibSmaPortNumGuid,
       ibSmaPortSubnetTimeout,
       ibSmaPortResponseTimeValue
   }
   STATUS current
   DESCRIPTION
      "The ibSmaMgmtPortGroup defines the MIB objects that describe
       the management port."
   ::= { ibSmaGroups 4 }

ibSmaDataPortGroup OBJECT-GROUP
   OBJECTS {
       ibSmaPortLinkWidthEnabled,
       ibSmaPortLinkWidthSupported,
       ibSmaPortLinkWidthActive,
       ibSmaPortLinkSpeedSupported,
       ibSmaPortLinkState,
       ibSmaPortPhysState,
       ibSmaPortLinkDownDefaultState,
       ibSmaPortLidMaskCount,
       ibSmaPortLinkSpeedActive,
       ibSmaPortLinkSpeedEnabled,
       ibSmaPortNeighborMtu,
       ibSmaPortVirtLaneSupport,
       ibSmaPortVlHighPriorityLimit,
       ibSmaPortVlArbHighCapacity,
       ibSmaPortVlArbLowCapacity,
       ibSmaPortMtuCapacity,
       ibSmaPortVlStallCount,
       ibSmaPortHeadOfQueueLife,
       ibSmaPortOperationalVls,
       ibSmaPortPartEnforceInbound,
       ibSmaPortPartEnforceOutbound,
       ibSmaPortFilterRawPktInbound,
       ibSmaPortFilterRawPktOutbound,
       ibSmaPortLocalPhysErrorThreshold,
       ibSmaPortOverrunErrorThreshold
   }
   STATUS current
   DESCRIPTION
      "The ibSmaDataPortGroup defines MIB objects for IB data ports."
   ::= { ibSmaGroups 5 }

ibSmaPKeyGroup OBJECT-GROUP
   OBJECTS {
       ibSmaPKeyMembership,
       ibSmaPKeyBase
   }
   STATUS current

Expires March 2006                                             [Page 64]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   DESCRIPTION
      "The ibSmaPKeyGroup defines the MIB objects that describe the
       Partition Keys."
   ::= { ibSmaGroups 6 }

ibSmaSlToVlMapGroup OBJECT-GROUP
   OBJECTS {
       ibSmaVirtualLane
   }
   STATUS current
   DESCRIPTION
      "The ibSmaSlToVlMapGroup defines the MIB objects that describe
       the Service Level to Virtual Lane mapping."
   ::= { ibSmaGroups 7 }

ibSmaVLArbitGroup OBJECT-GROUP
   OBJECTS {
       ibSmaHiPriVirtLane,
       ibSmaHiPriWeight,
       ibSmaLowPriVirtLane,
       ibSmaLowPriWeight
   }
   STATUS current
   DESCRIPTION
      "The ibSmaVLArbitGroup defines the MIB objects that describe
       the Virtual Lane High and Low Arbitrations."
   ::= { ibSmaGroups 8 }

ibSmaLFTGroup OBJECT-GROUP
   OBJECTS {
       ibSmaLinForwEgressPort
   }
   STATUS current
   DESCRIPTION
      "The ibSmaLFTGroup defines the MIB objects that describe
       the Linear Forwarding Table."
 ::= { ibSmaGroups 9 }

ibSmaRFTGroup OBJECT-GROUP
   OBJECTS {
       ibSmaRandomDestLID,
       ibSmaRandomForwEgressPort,
       ibSmaRandomLMC,
       ibSmaRandomIsValid
   }
   STATUS current
   DESCRIPTION
      "The ibSmaRFTGroup defines the MIB objects that describe
       the Random Forwarding Table."
  ::= { ibSmaGroups 10 }

ibSmaMFTGroup OBJECT-GROUP
   OBJECTS {

Expires March 2006                                             [Page 65]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       ibSmaMulForwMask
   }
   STATUS current
   DESCRIPTION
      "The ibSmaMFTGroup defines the MIB objects that describe
       the Multicast Forwarding Table."
 ::= { ibSmaGroups 11 }

ibSmaSMGroup OBJECT-GROUP
   OBJECTS {
       ibSmaSmGuid,
       ibSmaSmSmKey,
       ibSmaSmSmpCount,
       ibSmaSmPriority,
       ibSmaSmState
   }
   STATUS current
   DESCRIPTION
      "The ibSmaSMGroup defines the MIB objects that describe
       the Subnet Manager Information Table."
 ::= { ibSmaGroups 12 }

ibSmaVendDiagGroup OBJECT-GROUP
   OBJECTS {
       ibSmaPortGenericDiagCode,
       ibSmaPortVendorDiagCode,
       ibSmaPortVendorDiagIndexFwd,
       ibSmaPortVendorDiagData
   }
   STATUS current
   DESCRIPTION
      "The ibSmaVendDiagGroup defines the MIB objects that describe
       the vendor diagnostics table."
 ::= { ibSmaGroups 13 }

ibSmaLedGroup OBJECT-GROUP
   OBJECTS {
       ibSmaLedState
   }
   STATUS current
   DESCRIPTION
      "The ibSmaSMGroup defines the MIB objects that describe
       the LED table."
  ::= { ibSmaGroups 14 }

ibSmaNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS {
       ibSmaPortLinkStateChange,
       ibSmaLinkIntegrityThresReached,
       ibSmaExcessBuffOverrunThres,
       ibSmaFlowCntrlUpdateTimerExpire,
       ibSmaCapabilityMaskModified,
       ibSmaSysImageGuidModified,

Expires March 2006                                             [Page 66]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


       ibSmaBadManagementKey,
       ibSmaBadPartitionKey,
       ibSmaBadQueueKey,
       ibSmaBadPKeyAtSwitchPort
   }
   STATUS current
   DESCRIPTION
      "The notifications that an IPOIB SNMP agent transmits
       on the behalf of the SMA Trap message implementation."
   ::= { ibSmaGroups 15 }

END

5. Acknowledgments

   The author [Bill Swortwood] would like to acknowledge Anne Marie
   Merritt who authored the VIA MIB on which this document was
   initially based.


6. Security Considerations

   SNMPv1 by itself is not a secure environment.  Even if the network
   itself is secure (for example by using IPSec), even then, there is no
   control as to who on the secure network is allowed to access and
   GET/SET (read/change/create/delete) the objects in this MIB.

   It is recommended that the implementers consider the security
   features as provided by the SNMPv3 framework.  Specifically, the use
   of the User-based Security Model RFC 2574 [RFC2574] and the
   View-based Access Control Model RFC 2575 [RFC2575] is recommended.

   It is then a customer/user responsibility to ensure that the SNMP
   entity giving access to an instance of this MIB, is properly
   configured to give access to the objects only to those principals
   (users) that have legitimate rights to indeed GET or SET (change/
   create/delete) them.


7. IANA Considerations

   IANA is requested to make a MIB OID assignment under the transmission
   branch, that is, assign the infinibandMIB under { transmission 199 }.
   This sub-id is requested because 199 is the ifType for
   infiniband(199) and is available under transmission.

   In the future, IPOIB related standards track MIB modules should be
   rooted under the infinibandMIB subtree.  The IANA is requested to
   manage that namespace.  New assignments can only be made via a
   Standards Action as specified in [RFC2434].

   This document also requests IANA to assign { infinibandMIB 3 } to the

Expires March 2006                                             [Page 67]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   IB-SMA-MIB specified in this document.


8. References


8.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Structure of Management
             Information Version 2 (SMIv2)", STD 58, RFC 2578, April
             1999.

   [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Textual Conventions for
             SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Conformance Statements for
             SMIv2", STD 58, RFC 2580, April 1999.

   [RFC2863] McCloghrie, K., and Kastenholz F.,
             "The Interfaces Group MIB", RFC 2863, June 2000.

   [INFINIV1] InfiniBand Architecture Specification Volume 1,
              Release 1.1, November 6, 2002.


8.2. Informative References

   [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
             "Introduction and Applicability Statements for
             Internet-Standard Management Framework", RFC 3410,
             December 2002.


9. Authors' Addresses

   Bill Swortwood
   Motorola, Inc.
   900 South Diablo Way         Phone:   +1-602-438-3834
   Tempe, AZ 85282              Email:   Bill.Swortwood@motorola.com
   USA

   Sean Harnedy
   Mangrove Systems, Inc.
   10 Fairfield Boulevard       Phone:   +1-203-679-7539
   Wallingford, CT 06492        Email:   sharnedy@mangrovesystems.com
   USA



Expires March 2006                                             [Page 68]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   Bhargavi Shah
   Fabric Networks
   134 Flanders Road            Phone:   +1-508-599-6300
   Westborough, MA 01581        Email:   bshah@fabricnetworks.com
   USA


10. Intellectual Property Notice

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed
   to pertain to the implementation or use of the technology
   described in this document or the extent to which any license
   under such rights might or might not be available; nor does it
   represent that it has made any independent effort to identify any
   such rights.  Information on the procedures with respect to rights
   in RFC documents can be found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use
   of such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository
   at http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention
   any copyrights, patents or patent applications, or other
   proprietary rights that may cover technology that may be required
   to implement this standard.  Please address the information to the
   IETF at ietf-ipr@ietf.org.


11. Full Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is
   subject to the rights, licenses and restrictions contained in BCP
   78, and except as set forth therein, the authors retain all their
   rights.

   This document and translations of it may be copied and
   furnished to others, and derivative works that comment on
   or otherwise explain it or assist in its implementation may
   be prepared, copied, published and distributed, in whole or
   in part, without restriction of any kind, provided that the
   above copyright notice and this paragraph are included on
   all such copies and derivative works.  However, this document
   itself may not be modified in any way, such as by removing the
   copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other
   than English.

Expires March 2006                                             [Page 69]


Internet-Draft           IPOVERIB SMA MIB Module          September 2005


   The limited permissions granted above are perpetual and
   will not be revoked by the Internet Society or its
   successors or assigns.

   This document and the information contained herein are provided
   on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
   REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT
   THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
   ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
   PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.





































Expires March 2006                                             [Page 70]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/