[Docs] [txt|pdf] [Tracker] [WG] [Email] [Nits] [IPR]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 RFC 4544

Internet Draft                                              Mark Bakke
<draft-ietf-ips-iscsi-mib-00.txt>                           Jim Muchow
Expires October 2001                                     Cisco Systems

                                                      Marjorie Krueger
                                                       Hewlett-Packard

                                                            April 2001


                Definitions of Managed Objects for iSCSI



1.  Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet- Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.


1.1.  Copyright Notice

   Copyright (C) The Internet Society (2000).  All Rights Reserved.


2.  Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in TCP/IP based internets.
   In particular it defines objects for managing a client using the
   iSCSI (SCSI over TCP) protocol.  It is meant to match the latest
   version of iSCSI defined in [ISCSI].



Bakke, Muchow             Expires October 2001                  [Page 1]


Internet Draft                  iSCSI MIB                     April 2001


3.  Acknowledgments

   In addition to the authors, several people contributed to the
   development of this MIB.  Thanks especially to those who took the
   time to participate in our weekly conference calls to build our
   requirements, object models, table structures, and attributes: John
   Hufferd, Tom McSweeney (IBM), Kevin Gibbons (Nishan Systems), Chad
   Gregory (Intel), Jack Harwood (EMC), Hari Mudaliar (Adaptec), Ie Wei
   Njoo (Agilent), Lawrence Lamers (SAN Valley), Satish Mali (Stonefly
   Networks), and William Terrell (Troika).

   Special thanks to Tom McSweeney, Ie Wei Njoo, and Kevin Gibbons, who
   wrote the descriptions for many of the tables and attributes in this
   MIB.


4.  The SNMP Management Framework

   The SNMP Management Framework presently consists of five major
   components:

    o   An overall architecture, described in RFC 2571 [RFC2571].

    o   Mechanisms for describing and naming objects and events for the
        purpose of management.  The first version of this Structure of
        Management Information (SMI) is called SMIv1 and described in
        STD 16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC
        1215 [RFC1215].  The second version, called SMIv2, is described
        in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and
        STD 58, RFC 2580 [RFC2580].

    o   Message protocols for transferring management information.  The
        first version of the SNMP message protocol is called SNMPv1 and
        described in STD 15, RFC 1157 [RFC1157].  A second version of
        the SNMP message protocol, which is not an Internet standards
        track protocol, is called SNMPv2c and described in RFC 1901
        [RFC1901] and RFC 1906 [RFC1906].  The third version of the
        message protocol is called SNMPv3 and described in RFC 1906
        [RFC1906], RFC 2572 [RFC2572] and RFC 2574 [RFC2574].

    o   Protocol operations for accessing management information.  The
        first set of protocol operations and associated PDU formats is
        described in STD 15, RFC 1157 [RFC1157].  A second set of
        protocol operations and associated PDU formats is described in
        RFC 1905 [RFC1905].

    o   A set of fundamental applications described in RFC 2573
        [RFC2573] and the view-based access control mechanism described



Bakke, Muchow             Expires October 2001                  [Page 2]


Internet Draft                  iSCSI MIB                     April 2001


        in RFC 2575 [RFC2575].

   A more detailed introduction to the current SNMP Management Framework
   can be found in RFC 2570 [RFC2570].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the mechanisms defined in the SMI.

   This memo specifies a MIB module that is compliant to the SMIv2.  A
   MIB conforming to the SMIv1 can be produced through the appropriate
   translations.  The resulting translated MIB must be semantically
   equivalent, except where objects or events are omitted because no
   translation is possible (use of Counter64).  Some machine readable
   information in SMIv2 will be converted into textual descriptions in
   SMIv1 during the translation process.  However, this loss of machine
   readable information is not considered to change the semantics of the
   MIB.


5.  Discussion

   This MIB structure is intended to satisfy fault, configuration, and
   performance management for an iSCSI implementation.  It is structured
   around the well-known iSCSI objects, such as targets, initiators,
   sessions, connections, and the like.

   It is worthwhile to note that this is an iSCSI MIB and and such
   reflects only iSCSI objects (real or virtual). This means that this
   MIB will not directly deal with real SCSI objects or the SCSI
   protocol in general. This should be dealt with in a SCSI MIB if such
   a beast exists.  The iSCSI tables that would likely have parallel
   objects in a SCSI MIB contain a RowPointer, which can be used to
   point to the corresponding object in a standard or proprietary SCSI
   MIB, should one exist.

   The iSCSI MIB consists of seven objects, each of which is represented
   by several different tables.  This section contains a brief
   description of the "object" hierarchy and a description of each
   object, followed by a discussion of the actual SNMP table structure
   within the objects.

5.1.  Overall MIB structure

   The top-level object in this structure is the iSCSI instance, which
   contains all of the other objects.

   iscsiInstance



Bakke, Muchow             Expires October 2001                  [Page 3]


Internet Draft                  iSCSI MIB                     April 2001


      -- A distinct iSCSI entity within the managed system.
      -- Most implementations will have one of these.
      iscsiListenPort
         -- An IP Address and TCP Port pair on which this instance is
         -- listening for connections to its targets.
      iscsiSession
         -- An active iSCSI session between an initiator and a target.
         -- A session may be Inbound (outside initiator to our target)
         -- or Outbound (our initiator to an outside target).
         iscsiConnection
            -- An active TCP connection within an iSCSI session
      iscsiTarget
         -- An iSCSI target to which this iSCSI instance is providing
         -- access.
         iscsiAccessList
            -- A list of initiators that are allowed access to this
            -- target.
      iscsiInitiator
         -- An iSCSI initiator, used by this iSCSI instance to access
         -- iSCSI targets.

   An Instance can contain Initiators, Targets, or both.  Multiple
   ListenPorts may be present; the MIB assumes that any Target may be
   accessed via any ListenPort, although other access controls not
   reflected in the MIB might limit this.

   Logical Units and LUNs are SCSI-level entities, which will be covered
   in a separate SCSI MIB.

5.2.  MIB "object" structure

   Each iSCSI "object" is comprised of several tables, which will make
   it easier to navigate the iSCSI MIB from a graphical browser, and to
   update the iSCSI MIB in the future.

   Placing all of the indices, attributes, and statistics for each
   object in the same table would make the addition of new statistics
   and attributes appear messy.  Since iSCSI is an evolving standard, it
   is worth having a few extra tables to make this easier.  To this end,
   the attributes and statistics have been placed in separate tables,
   which augment the main indexed table for each object.  Since there
   are several categories of statistics that will likely grow, most of
   the objects contain several statistics tables.

   The following structure is used for all objects.  Just replace the
   "*" in the following names with the iSCSI object name in which you
   are interested.  For instance, the Target object would be
   iscsiTargetInfo.



Bakke, Muchow             Expires October 2001                  [Page 4]


Internet Draft                  iSCSI MIB                     April 2001


   iscsi*Info
      -- The main structure holding objects of a given type
      iscsi*Objects
         -- sub-iscsi*Info structures go here
         -- Example:  iscsiTargetInfo belongs under iscsiInstanceObjects
         -- and iscsiConnnectionInfo belongs under iscsiSessionObjects
      iscsi*Scalars
         -- iscsi*Info scalars go here
      iscsi*AttributesTable
         iscsi*AttributesEntry
            -- iscsi*Table index attributes
            -- iscsi*Entry non-statistical attributes
      iscsi*StatsTable
         iscsi*StatsEntry
            -- Augments iscsiAttributes*Entry
            -- iscsi*Entry generic statistical attributes
            -- Examples: Total requests, responses, data bytes
      iscsi*CxnErrorStatsTable
         iscsi*CxnErrorStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Connection error statistics
            -- Appropriate for Initiator, Target, Session, ListenPort
            -- Examples:  Digest, framing, and connection timeout errors
      iscsi*TxCmdStatsTable
         iscsi*TxCmdStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI request PDU transmitted
            -- Appropriate for Initiator, Session
            -- Examples:  TxScsiCmdPDUs, TxLoginCmdPDUs
      iscsi*RxCmdStatsTable
         iscsi*RxCmdStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI request PDU received
            -- Appropriate for Target, Session
            -- Examples:  RxScsiCmdPDUs, RxLoginCmdPDUs
      iscsi*TxRspStatsTable
         iscsi*TxRspStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI response PDU transmitted
            -- Appropriate for Target, Session
            -- Examples:  TxScsiRspPDUs, TxLoginRspPDUs
      iscsi*RxRspStatsTable
         iscsi*RxRspStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI response PDU received
            -- Appropriate for Initiator, Session
            -- Examples:  RxScsiRspPDUs, RxLoginRspPDUs
      iscsi*TxStatusStatsTable



Bakke, Muchow             Expires October 2001                  [Page 5]


Internet Draft                  iSCSI MIB                     April 2001


         iscsi*TxStatusStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI login status code transmitted
            -- Appropriate for Target, Session, ListenPort
            -- Examples:  TxStsAccepts, TxStsForbiddens
      iscsi*RxStatusStatsTable
         iscsi*RxStatusStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI login status code received
            -- Appropriate for Initiator, Session, ListenPort
            -- Examples:  RxStsAccepts, RxStsForbiddens
      iscsi*TxRejectStatsTable
         iscsi*TxRejectStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI reject code transmitted
            -- Appropriate for Target, Session
            -- Examples:  TxRjtFormats, TxRjtDataSacks
      iscsi*RxRejectStatsTable
         iscsi*RxRejectStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI reject code received
            -- Appropriate for Initiator, Session
            -- Examples:  RxRjtFormats, RxRjtDataSacks
      iscsi*TxLogoutStatsTable
         iscsi*TxLogoutStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI logout reason transmitted
            -- Appropriate for Initiator, Session
            -- Examples:  TxLgtSessionCloses, TxLgtCxnRecoveries
      iscsi*RxLogoutStatsTable
         iscsi*RxLogoutStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI logout reason received
            -- Appropriate for Target, Session
            -- Examples:  RxLgtSessionCloses, RxLgtCxnRecoveries
      iscsi*TxAsyncStatsTable
         iscsi*TxAsyncStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI async message transmitted
            -- Appropriate for Target, Session
            -- Examples:  TxAsyTargetResets, TxAsyLogoutRequests
      iscsi*RxAsyncStatsTable
         iscsi*RxAsyncStatsEntry
            -- Augments iscsiAttributes*Entry
            -- Number of each type of iSCSI async message received
            -- Appropriate for Initiator, Session
            -- Examples:  RxAsyTargetResets, RxAsyLogoutRequests




Bakke, Muchow             Expires October 2001                  [Page 6]


Internet Draft                  iSCSI MIB                     April 2001


   Not all of the StatsTables appear in each of the objects.  For
   example, TxCmdStats (commands transmitted) is not appropriate for a
   target table.  Other statistics tables may be added as needed.


5.3.  iscsiInstanceInfo

   iscsiInstanceInfo is the primary table of the iSCSI MIB from which
   all other tables are derived.  It contains the
   iscsiInstanceAttributesTable which lists all the known iSCSI
   instances accessible by the agent.

   One could envision that there might be just one instance (or row in
   this table); however, it exists as a table to allow for multiple
   virtual instances.  For example, many IP routing products now allow
   multiple virtual routers.  The iSCSI MIB has the same premise.

   Also, it is possible that for larger systems, a single SNMP agent may
   control and monitor multiple subsystems, each of which have one or
   even more instances.

   A scalar predecessor of the table called the iscsiInstanceNumber
   denotes the number of instances or rows in the
   iscsiInstanceAttributesTable. Each row also contains similar "Number"
   or instance counts for the various rows of the sub-tables that are
   derived from this table. The term "endpoint" has been used to denote
   either a target or initiator instance.

   Several statistics tables augment the iscsiInstanceAttributesTable.

   iscsiInstanceInfo also contains iscsiInstanceObjects, from which all
   of the other tables are derived.


5.4.  iscsiListenPortInfo

   iscsiListenPortInfo is contained within iscsiInstanceObjects, and
   contains the iscsiListenPortAttributesTable.

   The iscsiListenPortAttributesTable lists local sockets on which the
   iSCSI instance is listening for incoming connections.  This table
   contains the local IP address, TCP (or other protocol) port, and IP
   protocol (for now, just TCP) on which the socket is listening.

   Statistics tables augmenting the iscsiListenPortAttributesTable
   contain counts of each type of login status code sent, as well as
   connection and digest errors detected.




Bakke, Muchow             Expires October 2001                  [Page 7]


Internet Draft                  iSCSI MIB                     April 2001


   This table will usually be empty for iSCSI instances that contain
   only initiators (such as iSCSI host driver implementations).

5.5.  iscsiSessionInfo

   iscsiSessionInfo is contained within iscsiInstanceObjects, and
   contains the iscsiSessionAttributesTable.

   The iscsiSessionAttributesTable contains a set of rows that list the
   sessions known to be existing locally for each iSCSI instance.

   The session type for each session indicates whether it is an Inbound
   Session or an Outbound Session.  Inbound sessions are from some other
   initiator to a target within this iSCSI instance; Outbound sessions
   are from our initiator to a target outside this iSCSI instance.

   An inbound session may be correlated with its local target using the
   TargetName attribute of the session; the InitiatorName indicates the
   "other end", in some other entity.

   Similarly, an outbound session may be associated with its local
   initiator using the InitiatorName; in this case, the TargetName
   indicates the other end.

   Many attributes may be negotiated when starting an iSCSI session.
   These attributes are included in the session object.

   Some attributes, such as the integrity and authentication schemes,
   have some standard values which can be extended by vendors to include
   their own schemes.  Enumerated types have been provided for each of
   these; if a type is "Other", a corresponding UTF8String is used to
   indicate the name of the scheme in use.

   The iscsi session includes many statistics tables, due to the fact
   that a session can go either direction.  Its statistics are basically
   a superset of those offered by the Target and Initiator objects.

   iscsiSessionInfo also contains iscsiSessionObjects, from which the
   Connection table is derived.

5.6.  iscsiConnectionInfo

   iscsiConnectionInfo is contained within iscsiSessionObjects, and
   contains the iscsiConnectionAttributesTable.

   The iscsiConnectionAttributesTable contains a list of active
   connections within each session.  It contains the IP addresses and
   TCP (or other protocol) ports of both the local and remote side of



Bakke, Muchow             Expires October 2001                  [Page 8]


Internet Draft                  iSCSI MIB                     April 2001


   the connection.  These may be used to locate other connection-related
   information and statistics in the TCP MIB [RFC 2012].

   No statistics are currently kept for each connection.

5.7.  iscsiTargetInfo

   iscsiTargetInfo is contained within iscsiInstanceObjects, and
   contains the iscsiTargetAttributesTable.

   The iscsiTargetAttributesTable contains a list of iSCSI targets which
   may be accessed through the iSCSI instance.  This table contains the
   target's iSCSI Name, alias string, and the number of LUs.  Also
   included is a RowPointer which can be used to locate the associated
   SCSI target object, should a SCSI MIB be created.

   Statistics tables augmenting iscsiTargetAttributesTable are provided.

   iscsiTargetInfo also contains iscsiTargetObjects, from which the
   AccessList tables are derived.

5.8.  iscsiAccessListInfo

   iscsiAccessListInfo is contained within iscsiTargetObjects, and
   contains the iscsiAccessListAttributesTable.

   The iscsiAccessListAttributesTable contains an entry for each
   initiator that is allowed to access the target under which it
   appears.  If a target allows access to any initiator, an
   AccessListAttributesEntry with the initiator's iSCSI name should be
   used.

   This table does not cover all possible access control schemes that a
   vendor could implement.  If access to an initiator cannot be
   determined just by its iSCSI name, an implementation may use the
   canonical name "iscsi", or may choose to place no entries in this
   table.

   No statistics are provided for access list entries.

5.9.  iscsiInitiatorInfo

   iscsiInitiatorInfo is contained within iscsiInstanceObjects, and
   contains the iscsiInitiatorAttributesTable.

   The iscsiInitiatorAttributesTable contains a list of iSCSI initiators
   which are used by this iSCSI instance to access targets.  Most
   implementations will include a single entry in this table, regardless



Bakke, Muchow             Expires October 2001                  [Page 9]


Internet Draft                  iSCSI MIB                     April 2001


   of the number of physical interfaces the initiator may use.  This
   table's attributes include the initiator's iSCSI name and alias
   string.

   Statistics tables augmenting iscsiInitiatorAttributesTable are
   provided.













































Bakke, Muchow             Expires October 2001                 [Page 10]


Internet Draft                  iSCSI MIB                     April 2001


6.  MIB Definitions



ISCSI-MIB DEFINITIONS  ::= BEGIN

    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
    IpAddress, Counter32, Counter64, experimental
    FROM SNMPv2-SMI

    TEXTUAL-CONVENTION, TruthValue, RowPointer
--    TEXTUAL-CONVENTION, DisplayString, TruthValue, RowPointer
    FROM SNMPv2-TC

    MODULE-COMPLIANCE, OBJECT-GROUP
    -- MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
    FROM SNMPv2-CONF
    ;

-- TBD
-- 1) add some more DESCRIPTIONs
-- 2) look into need for config tables
-- 3) traps/notifications?

iscsiModule MODULE-IDENTITY
    LAST-UPDATED                    "0104020000Z" -- April 2, 2001
    ORGANIZATION                    "Cisco Systems, Inc"
    CONTACT-INFO
    "
    Mark Bakke
    Postal: Cisco Systems, Inc
    6450 Wedgwood Road, Suite 130
    Maple Grove, MN
    USA 55311

    Tel: +1 763-398-1000
    Fax: +1 763-398-1001

    E-mail: mbakke@cisco.com

    Marjorie Krueger
    Postal: Hewlett-Packard
    Networked Storage Architecture
    Networked Storage Solutions Org.
    8000 Foothills Blvd.
    Roseville, CA 95747




Bakke, Muchow             Expires October 2001                 [Page 11]


Internet Draft                  iSCSI MIB                     April 2001


    Tel: +1 916-785-2656
    Tel: +1 916-785-0391

    Email: marjorie_krueger@hp.com

    Jim Muchow
    Postal: Cisco Systems, Inc
    6450 Wedgwood Road, Suite 130
    Maple Grove, MN
    USA 55311

    Tel: +1 763-398-1000
    Fax: +1 763-398-1001

    E-mail: jmuchow@cisco.com"

    DESCRIPTION
     "."

    REVISION "0104020000Z" -- April 2, 2001
    DESCRIPTION
        "Various changes, additions, deletions:
     1) Extensive re-organization of Comformance area.
     2) Removal of Lu & Lun groups
     3) Addition of lots of DESCRIPTIONS... but
     still not enough."

    REVISION "0102280000Z" -- February 28, 2001
    DESCRIPTION
        "Complete re-write, with the assistance of various
        persons in the iSCSI MIB working group."

    REVISION "0007280000Z"   -- July 28, 2000
    DESCRIPTION "Update to re-arrange the tables so that
        the initiator table is now an expansion table
        for the base iSCSI table.
        Added a couple of additional variables, the
        targetLunNumber in the target table and the
        lunSerialNumber in the lun table.
        Also a better definition of the OBJECT-GROUPs. "

::= { experimental 1 }

--
-- We need to get an experimental number for this MIB.
--

iscsiObjects OBJECT IDENTIFIER ::= { iscsiModule 1 }



Bakke, Muchow             Expires October 2001                 [Page 12]


Internet Draft                  iSCSI MIB                     April 2001


iscsiNotifications OBJECT IDENTIFIER ::= { iscsiModule 2 }
iscsiConformance OBJECT IDENTIFIER ::= { iscsiModule 3 }

-- Textual Conventions

Utf8String ::= TEXTUAL-CONVENTION
    DISPLAY-HINT                   "255t"
    STATUS                         current
    DESCRIPTION
        "Represents textual information taken from the UTF-8
        character set.
        Any object defined using this syntax may not exceed 255
        characters in length."
    SYNTAX                         OCTET STRING (SIZE (0..255))

-- OK, the various preliminaries are out of the way...

-- There is a single object from which all others are based
iscsiInstanceInfo OBJECT IDENTIFIER ::= { iscsiObjects 1 }

iscsiInstanceObjects OBJECT IDENTIFIER ::= { iscsiInstanceInfo 1 }
iscsiInstanceScalars OBJECT IDENTIFIER ::= { iscsiInstanceInfo 2 }

iscsiInstanceNumber OBJECT-TYPE
    SYNTAX                         Unsigned32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The number of iSCSI instances monitored and/or managed
     by a single agent."
::= { iscsiInstanceScalars 1 }

iscsiInstanceAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInstanceAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of iSCSI instances present on the system."
::= { iscsiInstanceInfo 3 }

iscsiInstanceAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiInstanceAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular iSCSI instance."
    INDEX { iscsiInstIndex }



Bakke, Muchow             Expires October 2001                 [Page 13]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiInstanceAttributesTable 1 }

IscsiInstanceAttributesEntry ::= SEQUENCE {
    iscsiInstIndex                 Unsigned32,
    iscsiInstName                  Utf8String,
    iscsiInstVersionMin            INTEGER,
    iscsiInstVersionMax            INTEGER,
    iscsiInstVendorID              Utf8String,
    iscsiInstVendorVersion         Utf8String,
    iscsiInstListenPortNumber      Unsigned32,
    iscsiInstSessionNumber         Unsigned32,
    iscsiInstTargetNumber          Unsigned32,
    iscsiInstInitiatorNumber       Unsigned32,
    iscsiInstNameServiceIpAddr     IpAddress,
    iscsiInstNameServicePort       Unsigned32,
    iscsiInstNameServiceType       Utf8String
}

iscsiInstIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     ISCSI instance."
::= { iscsiInstanceAttributesEntry 1 }

iscsiInstName OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A UTF-8 string, determined by the implementation to name the iSCSI
     instance.  As most implementations only use a single instance, this
     may be left blank.  Implementations that support multiple iSCSI
     instances may use this string in whatever manner they choose to
     describe the purpose of the instance to a user."
::= { iscsiInstanceAttributesEntry 2 }

iscsiInstVersionMin OBJECT-TYPE
    SYNTAX                       INTEGER (0..255)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Minimum version number of the iSCSI specification supported
     by this instance."
::= { iscsiInstanceAttributesEntry 3 }




Bakke, Muchow             Expires October 2001                 [Page 14]


Internet Draft                  iSCSI MIB                     April 2001


iscsiInstVersionMax OBJECT-TYPE
    SYNTAX                       INTEGER (0..255)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Maximum version number of the iSCSI specification supported
     by this instance."
::= { iscsiInstanceAttributesEntry 4 }

iscsiInstVendorID OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A text string describing the manufacturer of this instance."
::= { iscsiInstanceAttributesEntry 5 }

iscsiInstVendorVersion OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A text string set by the manufacturer describing the verison
     of this instance.  The format of this string is determined
     solely by the manufacturer, and is for informational purposes
     only.  It is unrelated to the iSCSI specification version
     numbers."
::= { iscsiInstanceAttributesEntry 6 }

iscsiInstListenPortNumber OBJECT-TYPE
    SYNTAX                  Unsigned32 (1..4294967295)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The number of listen ports currently associated with this iSCSI
    instance."
::= { iscsiInstanceAttributesEntry 7 }

iscsiInstSessionNumber OBJECT-TYPE
    SYNTAX                  Unsigned32 (1..4294967295)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The number of sessions currently associated with this iSCSI
    instance."
::= { iscsiInstanceAttributesEntry 8 }

iscsiInstTargetNumber OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 15]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The number of targets currently associated with this iSCSI
    instance."
::= { iscsiInstanceAttributesEntry 9 }

iscsiInstInitiatorNumber OBJECT-TYPE
    SYNTAX                  Unsigned32 (1..4294967295)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The number of initiators currently associated with this iSCSI
    instance."
::= { iscsiInstanceAttributesEntry 10 }

iscsiInstNameServiceIpAddr         OBJECT-TYPE
    SYNTAX                         IpAddress
    MAX-ACCESS                     read-write
    STATUS                         current
    DESCRIPTION
     "The Ip Address of the name service being used, if there is one."
::= { iscsiInstanceAttributesEntry 11 }

iscsiInstNameServicePort           OBJECT-TYPE
    SYNTAX                         Unsigned32 (0..65535)
    MAX-ACCESS                     read-write
    STATUS                         current
    DESCRIPTION
     "The port of the name service being used, if there is one."
::= { iscsiInstanceAttributesEntry 12 }

iscsiInstNameServiceType           OBJECT-TYPE
    SYNTAX                         Utf8String
    MAX-ACCESS                     read-write
    STATUS                         current
    DESCRIPTION
     "The type of name service being used, if there is one.  The type string
     should represent a valid name service that conforms to the iSCSI name
     service conventions."
::= { iscsiInstanceAttributesEntry 13 }

iscsiInstanceStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInstanceStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION



Bakke, Muchow             Expires October 2001                 [Page 16]


Internet Draft                  iSCSI MIB                     April 2001


        "A list of iSCSI command/response PDU and octet data transfer counters
         for each of the ISCSI instances present on the system."
::= { iscsiInstanceInfo 4 }

iscsiInstanceStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInstanceStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing iSCSI command/response PDU and octet data
         transfer counters for a particular ISCSI instance."
    AUGMENTS { iscsiInstanceAttributesEntry }
::= { iscsiInstanceStatsTable 1 }


IscsiInstanceStatsEntry ::= SEQUENCE {
    iscsiInstTxCmdPdus             Counter32,
    iscsiInstTxRspPdus             Counter32,
    iscsiInstRxRspPdus             Counter32,
    iscsiInstRxCmdPdus             Counter32,
    iscsiInstTxDataOctets          Counter64,
    iscsiInstRxDataOctets          Counter64
}

iscsiInstTxCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were transmitted by this ISCSI instance."
::= { iscsiInstanceStatsEntry 1 }

iscsiInstTxRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were transmitted by this ISCSI instance."
::= { iscsiInstanceStatsEntry 2 }

iscsiInstRxRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were received by this ISCSI instance."
::= { iscsiInstanceStatsEntry 3 }




Bakke, Muchow             Expires October 2001                 [Page 17]


Internet Draft                  iSCSI MIB                     April 2001


iscsiInstRxCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were received by this ISCSI instance."
::= { iscsiInstanceStatsEntry 4 }

iscsiInstTxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were transmitted by this ISCSI instance."
::= { iscsiInstanceStatsEntry 5 }

iscsiInstRxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were received by this ISCSI instance."
::= { iscsiInstanceStatsEntry 6 }

iscsiInstanceCxnErrorStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInstanceCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of PDU or timeout connection error counters for
     each of the iSCSI instances present on this system."
::= { iscsiInstanceInfo 5 }

iscsiInstanceCxnErrorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInstanceCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing PDU or time-out connection error
     counters for a particular ISCSI instance."
    AUGMENTS { iscsiInstanceAttributesEntry }
::= { iscsiInstanceCxnErrorStatsTable 1 }


IscsiInstanceCxnErrorStatsEntry ::= SEQUENCE {
    iscsiInstHdrDigestErrors       Counter32,
    iscsiInstDataDigestErrors      Counter32,
    iscsiInstCxnTimeoutErrors      Counter32,



Bakke, Muchow             Expires October 2001                 [Page 18]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiInstFormatErrors          Counter32
}

iscsiInstHdrDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the ISCSI instance received which
     contained header digest errors."
::= { iscsiInstanceCxnErrorStatsEntry 1 }

iscsiInstDataDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the ISCSI instance received which
     contained data digest errors."
::= { iscsiInstanceCxnErrorStatsEntry 2 }

iscsiInstCxnTimeoutErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A initiator may set a time limit for completion of a SCSI command
     sequence.  This is the count of sequences which exceeded their
     time limit."
::= { iscsiInstanceCxnErrorStatsEntry 3 }

iscsiInstFormatErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the ISCSI instance received which
     contained a format error."
::= { iscsiInstanceCxnErrorStatsEntry 4 }

----------------------------------------------------------------------

iscsiListenPortInfo OBJECT IDENTIFIER ::= { iscsiInstanceObjects 1 }

iscsiListenPortObjects OBJECT IDENTIFIER ::= { iscsiListenPortInfo 1 }
iscsiListenPortScalars OBJECT IDENTIFIER ::= { iscsiListenPortInfo 2 }

iscsiListenPortAttributesTable OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 19]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                         SEQUENCE OF IscsiListenPortAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of sockets (in the TCP RFC sense) belonging to each
        iSCSI instance present on the system."
::= { iscsiListenPortInfo 3 }

iscsiListenPortAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiListenPortAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular socket instance."
    INDEX { iscsiInstIndex, iscsiLPIndex  }
::= { iscsiListenPortAttributesTable 1 }

IscsiListenPortAttributesEntry ::= SEQUENCE {
    iscsiLPIndex                   Unsigned32,
    iscsiLPProtocol                INTEGER,
    iscsiLPIpAddress               IpAddress,
    iscsiLPTcpPort                 Unsigned32
}

iscsiLPIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     port (aka socket) instance within an iSCSI instance present
     on the node."
::= { iscsiListenPortAttributesEntry 1 }

iscsiLPProtocol OBJECT-TYPE
    SYNTAX                       INTEGER (1..255)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The protocol expected on the listening port."
    DEFVAL                         { 6 } -- TCP
::= { iscsiListenPortAttributesEntry 2 }

iscsiLPIpAddress OBJECT-TYPE
    SYNTAX                       IpAddress
    MAX-ACCESS                     read-only
    STATUS                         current



Bakke, Muchow             Expires October 2001                 [Page 20]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
    "The port's IP address."
::= { iscsiListenPortAttributesEntry 3 }

iscsiLPTcpPort OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "If TCP is the LPProtocol, this is the port portion of the socket
    which is listening for connections."
::= { iscsiListenPortAttributesEntry 4 }

iscsiListenPortStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiListenPortStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of connect attempts and results counters."
::= { iscsiListenPortInfo 4 }

iscsiListenPortStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiListenPortStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing connect attempts and results
     counters for a particular port."
    AUGMENTS { iscsiListenPortAttributesEntry }
::= { iscsiListenPortStatsTable 1 }

IscsiListenPortStatsEntry ::= SEQUENCE {
    iscsiLPCxnCreations            Counter32,
    iscsiLPCxnRefusals             Counter32,
    iscsiLPCxnRefusalReason        Utf8String,
    iscsiLPCxnTerminations         Counter32,
    iscsiLPCxnTerminationReason    Utf8String,
    iscsiLPCxnShutdowns            Counter32
}

iscsiLPCxnCreations OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The count of connection attempts made to this listen port."
::= { iscsiListenPortStatsEntry 1 }




Bakke, Muchow             Expires October 2001                 [Page 21]


Internet Draft                  iSCSI MIB                     April 2001


iscsiLPCxnRefusals OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The count of connect attempt refusals."
::= { iscsiListenPortStatsEntry 2 }

iscsiLPCxnRefusalReason OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "If available, the reason for the last connection
    refusal."
::= { iscsiListenPortStatsEntry 3 }

iscsiLPCxnTerminations OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The count of errored, unexpected, or otherwise non-graceful
    connection terminations. In TCP terms, this would mean that
    one side sent a TCP RST."
::= { iscsiListenPortStatsEntry 4 }

iscsiLPCxnTerminationReason OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "If available, the reason for the last connection
    termination."
::= { iscsiListenPortStatsEntry 5 }

iscsiLPCxnShutdowns OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "The number of graceful terminations or shutdowns. In TCP terms,
    this would mean a full exchange of TCP FIN commands."
::= { iscsiListenPortStatsEntry 6 }

iscsiListenPortCxnErrorStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiListenPortCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible



Bakke, Muchow             Expires October 2001                 [Page 22]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
        "A list of PDU or timeout connection error counters for
     each of the Listen Port instances present on this system."
::= { iscsiListenPortInfo 5 }

iscsiListenPortCxnErrorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiListenPortCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing PDU or time-out connection error
     counters for a particular Listen Port instance."
    AUGMENTS { iscsiListenPortAttributesEntry }
::= { iscsiListenPortCxnErrorStatsTable 1 }

IscsiListenPortCxnErrorStatsEntry ::= SEQUENCE {
    iscsiLPHdrDigestErrors         Counter32,
    iscsiLPDataDigestErrors        Counter32,
    iscsiLPCxnTimeoutErrors        Counter32,
    iscsiLPFormatErrors            Counter32
}

iscsiLPHdrDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the port received which contained
     header digest errors."
::= { iscsiListenPortCxnErrorStatsEntry 1 }

iscsiLPDataDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the port received which contained
     data digest errors."
::= { iscsiListenPortCxnErrorStatsEntry 2 }

iscsiLPCxnTimeoutErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "This is the count of sequences which exceeded their
     time limit."



Bakke, Muchow             Expires October 2001                 [Page 23]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiListenPortCxnErrorStatsEntry 3 }

iscsiLPFormatErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the port received which contained
     a framing error."
::= { iscsiListenPortCxnErrorStatsEntry 4 }

iscsiListenPortTxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiListenPortTxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a Login command, it responds
        with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were transmitted through
     a port."
::= { iscsiListenPortInfo 6 }

iscsiListenPortTxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiListenPortTxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were transmitted through
        a particular port."
    AUGMENTS { iscsiListenPortAttributesEntry }
::= { iscsiListenPortTxStatusStatsTable 1 }

IscsiListenPortTxStatusStatsEntry ::= SEQUENCE {
    iscsiLPTxStsAccepts            Counter32,
    iscsiLPTxStsAuthenticates      Counter32,
    iscsiLPTxStsNameRequireds      Counter32,
    iscsiLPTxStsMoveTemps          Counter32,
    iscsiLPTxStsMovePerms          Counter32,
    iscsiLPTxStsProxyRequireds     Counter32,
    iscsiLPTxStsAuthFails          Counter32,
    iscsiLPTxStsForbiddens         Counter32,
    iscsiLPTxStsNotFounds          Counter32,
    iscsiLPTxStsRemoveds           Counter32,
    iscsiLPTxStsConflicts          Counter32,
    iscsiLPTxStsIsidErrors         Counter32,
    iscsiLPTxStsTargetErrors       Counter32,



Bakke, Muchow             Expires October 2001                 [Page 24]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiLPTxStsUnavailables       Counter32,
    iscsiLPTxStsInvalidVersions    Counter32
}

iscsiLPTxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     transmitted through this port."
::= { iscsiListenPortTxStatusStatsEntry 1 }

iscsiLPTxStsAuthenticates OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 2 }

iscsiLPTxStsNameRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 3 }

iscsiLPTxStsMoveTemps OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0101, Target Moved Temporarily,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 4 }

iscsiLPTxStsMovePerms OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current



Bakke, Muchow             Expires October 2001                 [Page 25]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 5 }

iscsiLPTxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 6 }

iscsiLPTxStsAuthFails OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 7 }

iscsiLPTxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 8 }

iscsiLPTxStsNotFounds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 9 }

iscsiLPTxStsRemoveds OBJECT-TYPE
    SYNTAX                       Counter32



Bakke, Muchow             Expires October 2001                 [Page 26]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 10 }

iscsiLPTxStsConflicts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0205, Target Conflict,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 11 }

iscsiLPTxStsIsidErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, Initiator SID Error,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 12 }

iscsiLPTxStsTargetErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 13 }

iscsiLPTxStsUnavailables OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 14 }




Bakke, Muchow             Expires October 2001                 [Page 27]


Internet Draft                  iSCSI MIB                     April 2001


iscsiLPTxStsInvalidVersions OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     transmitted though this port."
::= { iscsiListenPortTxStatusStatsEntry 15 }

iscsiListenPortRxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiListenPortRxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a Login command, it responds
        with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were received through
     a port."
::= { iscsiListenPortInfo 7 }

iscsiListenPortRxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiListenPortRxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were received through
        a particular port."
    AUGMENTS { iscsiListenPortAttributesEntry }
::= { iscsiListenPortRxStatusStatsTable 1 }

IscsiListenPortRxStatusStatsEntry ::= SEQUENCE {
    iscsiLPRxStsAccepts            Counter32,
    iscsiLPRxStsAuthenticates      Counter32,
    iscsiLPRxStsNameRequireds      Counter32,
    iscsiLPRxStsMoveTemps          Counter32,
    iscsiLPRxStsMovePerms          Counter32,
    iscsiLPRxStsProxyRequireds     Counter32,
    iscsiLPRxStsAuthFails          Counter32,
    iscsiLPRxStsForbiddens         Counter32,
    iscsiLPRxStsNotFounds          Counter32,
    iscsiLPRxStsRemoveds           Counter32,
    iscsiLPRxStsConflicts          Counter32,
    iscsiLPRxStsIsidErrors         Counter32,
    iscsiLPRxStsTargetErrors       Counter32,
    iscsiLPRxStsUnavailables       Counter32,



Bakke, Muchow             Expires October 2001                 [Page 28]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiLPRxStsInvalidVersions    Counter32
}

iscsiLPRxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     received through this port."
::= { iscsiListenPortRxStatusStatsEntry 1 }

iscsiLPRxStsAuthenticates OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 2 }

iscsiLPRxStsNameRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 3 }

iscsiLPRxStsMoveTemps OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0101, Target Moved Temporarily,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 4 }

iscsiLPRxStsMovePerms OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION



Bakke, Muchow             Expires October 2001                 [Page 29]


Internet Draft                  iSCSI MIB                     April 2001


        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 5 }

iscsiLPRxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 6 }

iscsiLPRxStsAuthFails OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 7 }

iscsiLPRxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 8 }

iscsiLPRxStsNotFounds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 9 }

iscsiLPRxStsRemoveds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 30]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 10 }

iscsiLPRxStsConflicts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0205, Target Conflict,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 11 }

iscsiLPRxStsIsidErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, Initiator SID Error,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 12 }

iscsiLPRxStsTargetErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 13 }

iscsiLPRxStsUnavailables OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 14 }

iscsiLPRxStsInvalidVersions OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 31]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     received though this port."
::= { iscsiListenPortRxStatusStatsEntry 15 }

----------------------------------------------------------------------

iscsiSessionInfo OBJECT IDENTIFIER ::= { iscsiInstanceObjects 2 }

iscsiSessionObjects OBJECT IDENTIFIER ::= { iscsiSessionInfo 1 }
iscsiSessionScalars OBJECT IDENTIFIER ::= { iscsiSessionInfo 2 }

iscsiSessionAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of Sessions belonging to each iSCSI instance
        present on the system."
::= { iscsiSessionInfo 3 }

iscsiSessionAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular Session instance."
    INDEX { iscsiInstIndex, iscsiSsnIndex }
::= { iscsiSessionAttributesTable 1 }

IscsiSessionAttributesEntry ::= SEQUENCE {
    iscsiSsnIndex                  Unsigned32,
    iscsiSsnType                   INTEGER,
    iscsiSsnTargetName             Utf8String,
    iscsiSsnInitiatorName          Utf8String,
    iscsiSsnUseR2t                 TruthValue,
    iscsiSsnBidirectionalUseR2t    TruthValue,
    iscsiSsnImmediateData          TruthValue,
    iscsiSsnEnableCmdRn            TruthValue,
    iscsiSsnInDataOrder            TruthValue,
    iscsiSsnBootSession            TruthValue,
    iscsiSsnMaxOutstandingR2t      INTEGER,
    iscsiSsnMaxDataPduLength       INTEGER,



Bakke, Muchow             Expires October 2001                 [Page 32]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiSsnFirstBurstSize         INTEGER,
    iscsiSsnInitiatorTagLength     INTEGER,
    iscsiSsnPingMaxReplyLength     INTEGER,
    iscsiSsnMaxTotalText           INTEGER,
    iscsiSsnKeyValueText           INTEGER,
    iscsiSsnConnectionNumber       Unsigned32,
    iscsiSsnMaxConnections         Unsigned32,
    iscsiSsnHeaderIntegrity        Utf8String,
    iscsiSsnDataIntegrity          Utf8String,
    iscsiSsnInitiatorAuth          Utf8String,
    iscsiSsnTargetAuth             Utf8String,
    iscsiSsnInitiatorUserName      Utf8String,
    iscsiSsnTargetUserName         Utf8String,
    iscsiSsnFramingScheme          Utf8String
}


iscsiSsnIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     Session instance within an iSCSI instance present on the node."
::= { iscsiSessionAttributesEntry 1 }

iscsiSsnType OBJECT-TYPE
    SYNTAX                         INTEGER { inboundSession(1),
                                             outboundSession(2) }
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Type of iSCSI session:
     InboundSession  - session is established from an external
                       initiator to a target within this iSCSI
                          instance.
     OutboundSession - session is established from an initiator
                       within this iSCSI instance to an external
                          target."
::= { iscsiSessionAttributesEntry 2 }

iscsiSsnTargetName OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "Name of the target, as described in iscsiTgtName."
::= { iscsiSessionAttributesEntry 3 }



Bakke, Muchow             Expires October 2001                 [Page 33]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnInitiatorName OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "Name of the initiator, as described in iscsiIntrName."
::= { iscsiSessionAttributesEntry 4 }

iscsiSsnUseR2t OBJECT-TYPE
    SYNTAX                       TruthValue
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Indicates whether the initiator and target have agreed to use
     the Ready To Transfer (R2T) protocol to control data flow
     for Data PDUs flowing toward the target on this session."
::= { iscsiSessionAttributesEntry 5 }

iscsiSsnBidirectionalUseR2t OBJECT-TYPE
    SYNTAX                  TruthValue
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Indicates whether the initiator and target have agreed to use
     the Ready To Transfer (R2T) protocol to contorl data flow
     for the write portions of bidirectional commands on this session."
::= { iscsiSessionAttributesEntry 6 }

iscsiSsnImmediateData OBJECT-TYPE
    SYNTAX                       TruthValue
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "Indicates whether the initiator and target have agreed to support
     immediate commands on this session."
::= { iscsiSessionAttributesEntry 7 }

iscsiSsnEnableCmdRn OBJECT-TYPE
    SYNTAX                       TruthValue
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 8 }

iscsiSsnInDataOrder OBJECT-TYPE
    SYNTAX                       TruthValue
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 34]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 9 }

iscsiSsnBootSession OBJECT-TYPE
    SYNTAX                       TruthValue
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 10 }

iscsiSsnMaxOutstandingR2t OBJECT-TYPE
    SYNTAX                  INTEGER (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 11 }

iscsiSsnMaxDataPduLength OBJECT-TYPE
    SYNTAX                  INTEGER (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 12 }

iscsiSsnFirstBurstSize OBJECT-TYPE
    SYNTAX                  INTEGER (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 13 }

iscsiSsnInitiatorTagLength OBJECT-TYPE
    SYNTAX                       INTEGER (16..32)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 14 }

iscsiSsnPingMaxReplyLength OBJECT-TYPE
    SYNTAX                       INTEGER (1..8091)
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 35]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 15 }

iscsiSsnMaxTotalText OBJECT-TYPE
    SYNTAX                       INTEGER (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 16 }

iscsiSsnKeyValueText OBJECT-TYPE
    SYNTAX                       INTEGER (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 17 }

iscsiSsnConnectionNumber OBJECT-TYPE
    SYNTAX                  Unsigned32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 18 }

iscsiSsnMaxConnections OBJECT-TYPE
    SYNTAX                  Unsigned32 (1..65535)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 19 }

iscsiSsnHeaderIntegrity OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 20 }

iscsiSsnDataIntegrity OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 36]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 21 }

iscsiSsnInitiatorAuth OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 22 }

iscsiSsnTargetAuth OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 23 }

iscsiSsnInitiatorUserName OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 24 }

iscsiSsnTargetUserName OBJECT-TYPE
    SYNTAX                  Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 25 }

iscsiSsnFramingScheme OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiSessionAttributesEntry 26 }

iscsiSessionStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionStatsEntry
    MAX-ACCESS                     not-accessible



Bakke, Muchow             Expires October 2001                 [Page 37]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
        "A list of iSCSI command/response PDU and octet data transfer counters
         for each of the Session instances present on the system."
::= { iscsiSessionInfo 4 }

iscsiSessionStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing iSCSI command/response PDU and octet data
         transfer counters for a particular Session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionStatsTable 1 }

IscsiSessionStatsEntry ::= SEQUENCE {
    iscsiSsnTxCmdPdus              Counter32,
    iscsiSsnTxRspPdus              Counter32,
    iscsiSsnRxRspPdus              Counter32,
    iscsiSsnRxCmdPdus              Counter32,
    iscsiSsnTxDataOctets           Counter64,
    iscsiSsnRxDataOctets           Counter64
}

iscsiSsnTxCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were transmitted by this session instance."
::= { iscsiSessionStatsEntry 1 }

iscsiSsnTxRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were transmitted by this session instance."
::= { iscsiSessionStatsEntry 2 }

iscsiSsnRxRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were received by this session instance."
::= { iscsiSessionStatsEntry 3 }



Bakke, Muchow             Expires October 2001                 [Page 38]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnRxCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were received by this session instance."
::= { iscsiSessionStatsEntry 4 }

iscsiSsnTxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were transmitted by this session instance."
::= { iscsiSessionStatsEntry 5 }

iscsiSsnRxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were received by this session instance."
::= { iscsiSessionStatsEntry 6 }


iscsiSessionCxnErrorStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of PDU or timeout connection error counters for
     each of the session instances present on this system."
::= { iscsiSessionInfo 5 }

iscsiSessionCxnErrorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing PDU or time-out connection error
     counters for a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionCxnErrorStatsTable 1 }

IscsiSessionCxnErrorStatsEntry ::= SEQUENCE {
    iscsiSsnHdrDigestErrors        Counter32,
    iscsiSsnDataDigestErrors       Counter32,
    iscsiSsnCxnTimeoutErrors       Counter32,



Bakke, Muchow             Expires October 2001                 [Page 39]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiSsnFormatErrors           Counter32
}

iscsiSsnHdrDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the session instance received which
     contained header digest errors."
::= { iscsiSessionCxnErrorStatsEntry 1 }

iscsiSsnDataDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the session instance received which
     contained data digest errors."
::= { iscsiSessionCxnErrorStatsEntry 2 }

iscsiSsnCxnTimeoutErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "This is the count of sequences which exceeded their
     time limit."
::= { iscsiSessionCxnErrorStatsEntry 3 }

iscsiSsnFormatErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the ISCSI instance received which
     contained a format error."
::= { iscsiSessionCxnErrorStatsEntry 4 }

iscsiSessionTxCmdStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of initiator command PDUs transmitted by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 6 }



Bakke, Muchow             Expires October 2001                 [Page 40]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSessionTxCmdStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of initiator command PDUs
     transmitted by a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxCmdStatsTable 1 }

IscsiSessionTxCmdStatsEntry ::= SEQUENCE {
    iscsiSsnTxNopOutPdus           Counter32,
    iscsiSsnTxScsiCmdPdus          Counter32,
    iscsiSsnTxScsiTaskMgmtCmdPdus  Counter32,
    iscsiSsnTxLoginCmdPdus         Counter32,
    iscsiSsnTxTextCmdPdus          Counter32,
    iscsiSsnTxScsiDataWritePdus    Counter32,
    iscsiSsnTxLogoutCmdPdus        Counter32,
    iscsiSsnTxSnackReqPdus         Counter32
}

iscsiSsnTxNopOutPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of NOP-Out PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 1 }

iscsiSsnTxScsiCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Command PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 2 }

iscsiSsnTxScsiTaskMgmtCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Command PDUs
     transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 3 }

iscsiSsnTxLoginCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32



Bakke, Muchow             Expires October 2001                 [Page 41]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Command PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 4 }

iscsiSsnTxTextCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Text Command PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 5 }

iscsiSsnTxScsiDataWritePdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs transmitted by this session following a WRITE
     command or in reply to Ready To Transfer (R2T) command."
::= { iscsiSessionTxCmdStatsEntry 6 }

iscsiSsnTxLogoutCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Command PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 7 }

iscsiSsnTxSnackReqPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SNACK Request PDUs transmitted by this session."
::= { iscsiSessionTxCmdStatsEntry 8 }

iscsiSessionRxCmdStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of initiator command PDUs received by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 7 }



Bakke, Muchow             Expires October 2001                 [Page 42]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSessionRxCmdStatsEntry OBJECT-TYPE
    SYNTAX                          IscsiSessionRxCmdStatsEntry
    MAX-ACCESS                      not-accessible
    STATUS                          current
    DESCRIPTION
        "An entry (row) containing counters of initiator command PDUs
     received by a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxCmdStatsTable 1 }

IscsiSessionRxCmdStatsEntry ::= SEQUENCE {
    iscsiSsnRxNopInPdus            Counter32,
    iscsiSsnRxScsiRspPdus          Counter32,
    iscsiSsnRxScsiTaskMgmtRspPdus  Counter32,
    iscsiSsnRxLoginRspPdus         Counter32,
    iscsiSsnRxTextRspPdus          Counter32,
    iscsiSsnRxScsiDataReadPdus     Counter32,
    iscsiSsnRxLogoutRspPdus        Counter32,
    iscsiSsnRxR2TPdus              Counter32,
    iscsiSsnRxAsyncPdus            Counter32,
    iscsiSsnRxRejectPdus           Counter32
}

iscsiSsnRxNopInPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of NOP-In PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 1 }

iscsiSsnRxScsiRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Response PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 2 }

iscsiSsnRxScsiTaskMgmtRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Response PDUs
     received by this session."
::= { iscsiSessionRxCmdStatsEntry 3 }




Bakke, Muchow             Expires October 2001                 [Page 43]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnRxLoginRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Login Response PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 4 }

iscsiSsnRxTextRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Text Response PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 5 }

iscsiSsnRxScsiDataReadPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs received by this session in
     reply to a READ command."
::= { iscsiSessionRxCmdStatsEntry 6 }

iscsiSsnRxLogoutRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Response PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 7 }

iscsiSsnRxR2TPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Ready To Transfer (R2T) PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 8 }

iscsiSsnRxAsyncPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Asynchronous Message PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 9 }



Bakke, Muchow             Expires October 2001                 [Page 44]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnRxRejectPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs received by this session."
::= { iscsiSessionRxCmdStatsEntry 10 }

iscsiSessionTxRspStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
         "A list of counters of response PDUs transmitted by each
      Session instance belonging to this iSCSI instance present
      on this system."
::= { iscsiSessionInfo 8 }

iscsiSessionTxRspStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of response PDUs transmitted
        by a particular Session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxRspStatsTable 1 }

IscsiSessionTxRspStatsEntry ::= SEQUENCE {
    iscsiSsnTxNopInPdus            Counter32,
    iscsiSsnTxScsiRspPdus          Counter32,
    iscsiSsnTxScsiTaskMgmtRspPdus  Counter32,
    iscsiSsnTxLoginRspPdus         Counter32,
    iscsiSsnTxTextRspPdus          Counter32,
    iscsiSsnTxScsiDataReadPdus     Counter32,
    iscsiSsnTxLogoutRspPdus        Counter32,
    iscsiSsnTxR2TPdus              Counter32,
    iscsiSsnTxAsyncPdus            Counter32,
    iscsiSsnTxRejectPdus           Counter32
}

iscsiSsnTxNopInPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of NOP-In PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 1 }



Bakke, Muchow             Expires October 2001                 [Page 45]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnTxScsiRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Response PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 2 }

iscsiSsnTxScsiTaskMgmtRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Response PDUs
     transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 3 }

iscsiSsnTxLoginRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Login Response PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 4 }

iscsiSsnTxTextRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Text Response PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 5 }

iscsiSsnTxScsiDataReadPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs transmitted by this session in
     reply to a READ command."
::= { iscsiSessionTxRspStatsEntry 6 }

iscsiSsnTxLogoutRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Response PDUs transmitted by this session."



Bakke, Muchow             Expires October 2001                 [Page 46]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionTxRspStatsEntry 7 }

iscsiSsnTxR2TPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Ready To Transfer (R2T) PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 8 }

iscsiSsnTxAsyncPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Asynchronous Message PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 9 }

iscsiSsnTxRejectPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs transmitted by this session."
::= { iscsiSessionTxRspStatsEntry 10 }

iscsiSessionRxRspStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of command PDUs received by each
        Session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 9 }

iscsiSessionRxRspStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionRxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of command PDUs received
        by a particular target instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxRspStatsTable 1 }

IscsiSessionRxRspStatsEntry ::= SEQUENCE {
    iscsiSsnRxNopOutPdus           Counter32,



Bakke, Muchow             Expires October 2001                 [Page 47]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiSsnRxScsiCmdPdus          Counter32,
    iscsiSsnRxScsiTaskMgmtCmdPdus  Counter32,
    iscsiSsnRxLoginCmdPdus         Counter32,
    iscsiSsnRxTextCmdPdus          Counter32,
    iscsiSsnRxScsiDataWritePdus    Counter32,
    iscsiSsnRxLogoutCmdPdus        Counter32,
    iscsiSsnRxSnackReqPdus         Counter32
}

iscsiSsnRxNopOutPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of NOP-Out PDUs received by this session."
::= { iscsiSessionRxRspStatsEntry 1 }

iscsiSsnRxScsiCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Command PDUs received by this session."
::= { iscsiSessionRxRspStatsEntry 2 }

iscsiSsnRxScsiTaskMgmtCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Command PDUs
     received by this session."
::= { iscsiSessionRxRspStatsEntry 3 }

iscsiSsnRxLoginCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Command PDUs received by this session."
::= { iscsiSessionRxRspStatsEntry 4 }

iscsiSsnRxTextCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Text Command PDUs received by this session."



Bakke, Muchow             Expires October 2001                 [Page 48]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionRxRspStatsEntry 5 }

iscsiSsnRxScsiDataWritePdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Data PDUs received by this session in
     reply to a WRITE command."
::= { iscsiSessionRxRspStatsEntry 6 }

iscsiSsnRxLogoutCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Command PDUs received by this session."
::= { iscsiSessionRxRspStatsEntry 7 }

iscsiSsnRxSnackReqPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SNACK Request PDUs received by this session."
::= { iscsiSessionRxRspStatsEntry 8 }

iscsiSessionTxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a Login command, it responds
        with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were transmitted by each
        Session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 10 }

iscsiSessionTxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were transmitted by
        a particular Session instance."



Bakke, Muchow             Expires October 2001                 [Page 49]


Internet Draft                  iSCSI MIB                     April 2001


    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxStatusStatsTable 1 }

IscsiSessionTxStatusStatsEntry ::= SEQUENCE {
    iscsiSsnTxStsAccepts           Counter32,
    iscsiSsnTxStsAuthenticates     Counter32,
    iscsiSsnTxStsNameRequireds     Counter32,
    iscsiSsnTxStsMoveTemps         Counter32,
    iscsiSsnTxStsMovePerms         Counter32,
    iscsiSsnTxStsProxyRequireds    Counter32,
    iscsiSsnTxStsAuthFails         Counter32,
    iscsiSsnTxStsForbiddens        Counter32,
    iscsiSsnTxStsNotFounds         Counter32,
    iscsiSsnTxStsRemoveds          Counter32,
    iscsiSsnTxStsConflicts         Counter32,
    iscsiSsnTxStsIsidErrors        Counter32,
    iscsiSsnTxStsTargetErrors      Counter32,
    iscsiSsnTxStsUnavailables      Counter32,
    iscsiSsnTxStsInvalidVersions   Counter32
}

iscsiSsnTxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 1 }

iscsiSsnTxStsAuthenticates OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 2 }

iscsiSsnTxStsNameRequireds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,



Bakke, Muchow             Expires October 2001                 [Page 50]


Internet Draft                  iSCSI MIB                     April 2001


     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 3 }

iscsiSsnTxStsMoveTemps OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0101, Target Moved Temporarily,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 4 }

iscsiSsnTxStsMovePerms OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 5 }

iscsiSsnTxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 6 }

iscsiSsnTxStsAuthFails OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 7 }

iscsiSsnTxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION



Bakke, Muchow             Expires October 2001                 [Page 51]


Internet Draft                  iSCSI MIB                     April 2001


        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 8 }

iscsiSsnTxStsNotFounds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 9 }

iscsiSsnTxStsRemoveds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 10 }

iscsiSsnTxStsConflicts OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0205, Target Conflict,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 11 }

iscsiSsnTxStsIsidErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, Initiator SID Error,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 12 }

iscsiSsnTxStsTargetErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 52]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 13 }

iscsiSsnTxStsUnavailables OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 14 }

iscsiSsnTxStsInvalidVersions OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     transmitted by this session."
::= { iscsiSessionTxStatusStatsEntry 15 }

iscsiSessionTxRejectStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a message with a format error
        or a digest error, it responds by sending a Reject PDU
        which carries the header of the message in error, as
        well as a reject Reason code which describes the error.
        This table contains a list of counters of Reject PDUs
        of each Reason code, that were transmitted by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 11 }

iscsiSessionTxRejectStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Reject PDUs



Bakke, Muchow             Expires October 2001                 [Page 53]


Internet Draft                  iSCSI MIB                     April 2001


        of each reject Reason code, that were transmitted by
        a particular Session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxRejectStatsTable 1 }

IscsiSessionTxRejectStatsEntry ::= SEQUENCE {
    iscsiSsnTxRjtFormats           Counter32,
    iscsiSsnTxRjtHdrDigests        Counter32,
    iscsiSsnTxRjtDataDigests       Counter32,
    iscsiSsnTxRjtDataSnacks        Counter32,
    iscsiSsnTxRjtRestarts          Counter32,
    iscsiSsnTxRjtFullFeatures      Counter32
}

iscsiSsnTxRjtFormats OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     1, Format Error, transmitted by this session."
::= { iscsiSessionTxRejectStatsEntry 1 }

iscsiSsnTxRjtHdrDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     2, Header Digest Error, transmitted by this session."
::= { iscsiSessionTxRejectStatsEntry 2 }

iscsiSsnTxRjtDataDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     3, Payload Digest Error, transmitted by this session."
::= { iscsiSessionTxRejectStatsEntry 3 }

iscsiSsnTxRjtDataSnacks OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     4, Data-SACK Reject, transmitted by this session."



Bakke, Muchow             Expires October 2001                 [Page 54]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionTxRejectStatsEntry 4 }

iscsiSsnTxRjtRestarts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     5, Command Retry Reject, transmitted by this session."
::= { iscsiSessionTxRejectStatsEntry 5 }

iscsiSsnTxRjtFullFeatures OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     15, Full Feature Phase Reject, transmitted by this session."
::= { iscsiSessionTxRejectStatsEntry 6 }

iscsiSessionTxLogoutStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator sends a Logout PDU to a target to perform
        a controlled closing of a connection.  The Logout PDU
        carries a Reason code, indicating the reason for the Logout.
        This table contains a list of counters of Logout PDUs
        of each Reason code, that were trasmitted by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 12 }

iscsiSessionTxLogoutStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Logout PDUs
        of each Reason code, that were transmitted by
        a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxLogoutStatsTable 1 }

IscsiSessionTxLogoutStatsEntry ::= SEQUENCE {
    iscsiSsnTxLgtSessionCloses     Counter32,
    iscsiSsnTxLgtCxnRecoveries     Counter32,



Bakke, Muchow             Expires October 2001                 [Page 55]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiSsnTxLgtTargetRequests    Counter32
}

iscsiSsnTxLgtSessionCloses OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     0, Close the session, transmitted by this session."
::= { iscsiSessionTxLogoutStatsEntry 1 }

iscsiSsnTxLgtCxnRecoveries OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     1, Remove the connection for recovery,
     transmitted by this session."
::= { iscsiSessionTxLogoutStatsEntry 2 }

iscsiSsnTxLgtTargetRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Logout PDUs with Reason code
     2, Remove the connection at Target's request,
     transmitted by this session."
::= { iscsiSessionTxLogoutStatsEntry 3 }

iscsiSessionTxAsyncStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionTxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A target sends an Asynchronous Message PDU to report an
        event that does not correspond to a particular command.
        Some events are strictly related to iSCSI, while others
        are related to SCSI.  The Asynchronous Message PDUs includes
        an Event code to describe the iSCSI event.  This table
        contains a list of counters of Asynchronous Message PDUs
        of each iSCSI Event code, that were transmitted by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 13 }




Bakke, Muchow             Expires October 2001                 [Page 56]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSessionTxAsyncStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionTxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Asynchronous Message
        PDUs of each iSCSI Event code that were transmitted by
        a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionTxAsyncStatsTable 1 }

IscsiSessionTxAsyncStatsEntry ::= SEQUENCE {
    iscsiSsnTxAsyTargetResets      Counter32,
    iscsiSsnTxAsyLogoutRequests    Counter32,
    iscsiSsnTxAsyCxnDrops          Counter32
}

iscsiSsnTxAsyTargetResets OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     1, Target is being reset, transmitted by this session."
::= { iscsiSessionTxAsyncStatsEntry 1 }

iscsiSsnTxAsyLogoutRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target requests Logout, transmitted by this session."
::= { iscsiSessionTxAsyncStatsEntry 2 }

iscsiSsnTxAsyCxnDrops OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target indicates it will/has dropped the connection,
     transmitted by this session."
::= { iscsiSessionTxAsyncStatsEntry 3 }

iscsiSessionRxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxStatusStatsEntry
    MAX-ACCESS                     not-accessible



Bakke, Muchow             Expires October 2001                 [Page 57]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
        "When an initiator attempts send a Login command, the target
        responds with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were received by each
        session instance belonging to this iSCSI instance present
        on this system."
::= { iscsiSessionInfo 14 }

iscsiSessionRxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionRxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were received by
        a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxStatusStatsTable 1 }

IscsiSessionRxStatusStatsEntry ::= SEQUENCE {
    iscsiSsnRxStsAccepts           Counter32,
    iscsiSsnRxStsAuthenticates     Counter32,
    iscsiSsnRxStsNameRequireds     Counter32,
    iscsiSsnRxStsMoveTemps         Counter32,
    iscsiSsnRxStsMovePerms         Counter32,
    iscsiSsnRxStsProxyRequireds    Counter32,
    iscsiSsnRxStsAuthFails         Counter32,
    iscsiSsnRxStsForbiddens        Counter32,
    iscsiSsnRxStsNotFounds         Counter32,
    iscsiSsnRxStsRemoveds          Counter32,
    iscsiSsnRxStsConflicts         Counter32,
    iscsiSsnRxStsIsidErrors        Counter32,
    iscsiSsnRxStsTargetErrors      Counter32,
    iscsiSsnRxStsUnavailables      Counter32,
    iscsiSsnRxStsInvalidVersions   Counter32
}

iscsiSsnRxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 1 }



Bakke, Muchow             Expires October 2001                 [Page 58]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnRxStsAuthenticates OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 2 }

iscsiSsnRxStsNameRequireds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 3 }

iscsiSsnRxStsMoveTemps OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0101, Target Moved Temporarily,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 4 }

iscsiSsnRxStsMovePerms OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 5 }

iscsiSsnRxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     received by this session."



Bakke, Muchow             Expires October 2001                 [Page 59]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionRxStatusStatsEntry 6 }

iscsiSsnRxStsAuthFails OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 7 }

iscsiSsnRxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 8 }

iscsiSsnRxStsNotFounds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 9 }

iscsiSsnRxStsRemoveds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 10 }

iscsiSsnRxStsConflicts OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status



Bakke, Muchow             Expires October 2001                 [Page 60]


Internet Draft                  iSCSI MIB                     April 2001


     0x0205, Target Conflict,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 11 }

iscsiSsnRxStsIsidErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, initiator SID Error,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 12 }

iscsiSsnRxStsTargetErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 13 }

iscsiSsnRxStsUnavailables OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 14 }

iscsiSsnRxStsInvalidVersions OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     received by this session."
::= { iscsiSessionRxStatusStatsEntry 15 }

iscsiSessionRxRejectStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current



Bakke, Muchow             Expires October 2001                 [Page 61]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
        "An Initiator receives a Reject PDU from the target when the target
         cannot proceed with the task requested by the initiator because of
         a format error, a digest error, and other errors. A Reject PDU contains
         a reject Reason code which describes the error. This table contains a
         list of counters of Reject PDUs of each Reason code, that were
         received by each session instance belonging to this iSCSI instance
         present on the system."
::= { iscsiSessionInfo 15 }

iscsiSessionRxRejectStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionRxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Reject PDUs
        of each reject Reason code, that were received by
        a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxRejectStatsTable 1 }

IscsiSessionRxRejectStatsEntry ::= SEQUENCE {
    iscsiSsnRxRjtFormats           Counter32,
    iscsiSsnRxRjtHdrDigests        Counter32,
    iscsiSsnRxRjtDataDigests       Counter32,
    iscsiSsnRxRjtDataSnacks        Counter32,
    iscsiSsnRxRjtRestarts          Counter32,
    iscsiSsnRxRjtFullFeatures      Counter32
}

iscsiSsnRxRjtFormats OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     1, Format Error, received by this session."
::= { iscsiSessionRxRejectStatsEntry 1 }

iscsiSsnRxRjtHdrDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     2, Header Digest Error, received by this session."
::= { iscsiSessionRxRejectStatsEntry 2 }




Bakke, Muchow             Expires October 2001                 [Page 62]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSsnRxRjtDataDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     3, Payload Digest Error, received by this session."
::= { iscsiSessionRxRejectStatsEntry 3 }

iscsiSsnRxRjtDataSnacks OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     4, Data-SACK Reject, received by this session."
::= { iscsiSessionRxRejectStatsEntry 4 }

iscsiSsnRxRjtRestarts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     5, Command Retry Reject, received by this session."
::= { iscsiSessionRxRejectStatsEntry 5 }

iscsiSsnRxRjtFullFeatures OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     15, Full Feature Phase Reject, received by this session."
::= { iscsiSessionRxRejectStatsEntry 6 }

iscsiSessionRxLogoutStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator sends a Logout PDU to a target to perform
        a controlled closing of a connection.  The Logout PDU
        carries a Reason code, indicating the reason for the Logout.
        This table contains a list of counters of Logout PDUs
        of each Reason code, that were received by each
        session instance belonging to this iSCSI instance present
        on this system."



Bakke, Muchow             Expires October 2001                 [Page 63]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionInfo 16 }

iscsiSessionRxLogoutStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionRxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Logout PDUs
        of each Reason code, that were received by
        a particular session instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxLogoutStatsTable 1 }

IscsiSessionRxLogoutStatsEntry ::= SEQUENCE {
    iscsiSsnRxLgtSessionCloses     Counter32,
    iscsiSsnRxLgtCxnRecoveries     Counter32,
    iscsiSsnRxLgtTargetRequests    Counter32
}

iscsiSsnRxLgtSessionCloses OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     0, Close the session, received by this session."
::= { iscsiSessionRxLogoutStatsEntry 1 }

iscsiSsnRxLgtCxnRecoveries OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     1, Remove the connection for recovery,
     received by this session."
::= { iscsiSessionRxLogoutStatsEntry 2 }

iscsiSsnRxLgtTargetRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Logout PDUs with Reason code
     2, Remove the connection at target's request,
     received by this session."
::= { iscsiSessionRxLogoutStatsEntry 3 }




Bakke, Muchow             Expires October 2001                 [Page 64]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSessionRxAsyncStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiSessionRxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator receives an Asynchronous Message PDU from a target to
         report an event that does not correspond to a particular command.
         Some events are strictly related to iSCSI, while others are related to
         SCSI.  The Asynchronous Message PDU includes an Event code to describe
         the iSCSI event.  This table contains a list of counters of
         Asynchronous Message PDUs of each iSCSI Event code, that were received
         by each session instance belonging to this iSCSI instance present on
         the system."
::= { iscsiSessionInfo 17 }

iscsiSessionRxAsyncStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiSessionRxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Asynchronous Message PDUs of each
         iSCSI Event code that were received by a particular session
         instance."
    AUGMENTS { iscsiSessionAttributesEntry }
::= { iscsiSessionRxAsyncStatsTable 1 }

IscsiSessionRxAsyncStatsEntry ::= SEQUENCE {
    iscsiSsnRxAsyTargetResets      Counter32,
    iscsiSsnRxAsyLogoutRequests    Counter32,
    iscsiSsnRxAsyCxnDrops          Counter32
}

iscsiSsnRxAsyTargetResets OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     1, Target is being reset, received by this session."
::= { iscsiSessionRxAsyncStatsEntry 1 }

iscsiSsnRxAsyLogoutRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target requests Logout, received by this session."



Bakke, Muchow             Expires October 2001                 [Page 65]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiSessionRxAsyncStatsEntry 2 }

iscsiSsnRxAsyCxnDrops OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target indicates it will/has dropped the connection,
     received by this session."
::= { iscsiSessionRxAsyncStatsEntry 3 }

----------------------------------------------------------------------

iscsiConnectionInfo OBJECT IDENTIFIER ::= { iscsiSessionObjects 1 }

iscsiConnectionObjects OBJECT IDENTIFIER ::= { iscsiConnectionInfo 1 }
iscsiConnectionScalars OBJECT IDENTIFIER ::= { iscsiConnectionInfo 2 }

iscsiConnectionAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiConnectionAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of Connections belonging to each iSCSI instance
        present on the system."
::= { iscsiConnectionInfo 3 }

iscsiConnectionAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiConnectionAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular Connection instance."
    INDEX { iscsiInstIndex, iscsiSsnIndex, iscsiCxnIndex }
::= { iscsiConnectionAttributesTable 1 }

IscsiConnectionAttributesEntry ::= SEQUENCE {
    iscsiCxnIndex                  Unsigned32,
    iscsiCxnState                  INTEGER,
    iscsiCxnProtocol               INTEGER,
    iscsiCxnLocalIpAddress         IpAddress,
    iscsiCxnLocalTcpPort           Unsigned32,
    iscsiCxnRemoteIpAddress        IpAddress,
    iscsiCxnRemoteTcpPort          Unsigned32
}




Bakke, Muchow             Expires October 2001                 [Page 66]


Internet Draft                  iSCSI MIB                     April 2001


iscsiCxnIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     Connection instance of a particular Session instance within an
     iSCSI instance present on the node."
::= { iscsiConnectionAttributesEntry 1 }

iscsiCxnState OBJECT-TYPE
    SYNTAX                       INTEGER { oneKind(0), anotherKind(2) }
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiConnectionAttributesEntry 2 }

iscsiCxnProtocol OBJECT-TYPE
    SYNTAX                       INTEGER (1..255)
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The protocol over which this connection instance is
     running."
    DEFVAL                         { 6 } -- TCP
::= { iscsiConnectionAttributesEntry 3 }

iscsiCxnLocalIpAddress OBJECT-TYPE
    SYNTAX                  IpAddress
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The Local IP address used by this connection instance."
::= { iscsiConnectionAttributesEntry 4 }

iscsiCxnLocalTcpPort OBJECT-TYPE
    SYNTAX                       Unsigned32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The Local (TCP) port used by this connection instance."
::= { iscsiConnectionAttributesEntry 5 }

iscsiCxnRemoteIpAddress OBJECT-TYPE
    SYNTAX                  IpAddress
    MAX-ACCESS                     read-only
    STATUS                         current



Bakke, Muchow             Expires October 2001                 [Page 67]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
     "The Remote IP address used by this connection instance."
::= { iscsiConnectionAttributesEntry 6 }

iscsiCxnRemoteTcpPort OBJECT-TYPE
    SYNTAX                       Unsigned32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The Remote (TCP) port used by this connection instance."
::= { iscsiConnectionAttributesEntry 7 }

----------------------------------------------------------------------

iscsiTargetInfo OBJECT IDENTIFIER ::= { iscsiInstanceObjects 3 }

iscsiTargetObjects OBJECT IDENTIFIER ::= { iscsiTargetInfo 1 }
iscsiTargetScalars OBJECT IDENTIFIER ::= { iscsiTargetInfo 2 }

iscsiTargetAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of targets belonging to each iSCSI instance
        present on the system."
::= { iscsiTargetInfo 3 }

iscsiTargetAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular target instance."
    INDEX { iscsiInstIndex, iscsiTgtIndex }
::= { iscsiTargetAttributesTable 1 }

IscsiTargetAttributesEntry ::= SEQUENCE {
    iscsiTgtIndex                  Unsigned32,
    iscsiTgtName                   Utf8String,
    iscsiTgtAlias                  Utf8String,
    iscsiTgtScsiAttributes         RowPointer
}

iscsiTgtIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible



Bakke, Muchow             Expires October 2001                 [Page 68]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     target instance within an iSCSI instance present on the node."
::= { iscsiTargetAttributesEntry 1 }

iscsiTgtName OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A UTF-8 string which can be resolved by a DNS into
     an IP address for the target node."
::= { iscsiTargetAttributesEntry 2 }

iscsiTgtAlias OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A human-readable name or description of the target.  If configured,
     this alias may be communicated to the initiator during a Login Response
     message. This field may also be returned in the response to the
     SendTargets text command. This string is not used as an identifier, but
     can be displayed by the initiator's user interface in a list of targets
     to which it is connected. "
::= { iscsiTargetAttributesEntry 3 }

iscsiTgtScsiAttributes OBJECT-TYPE
    SYNTAX                  RowPointer
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
    "."
::= { iscsiTargetAttributesEntry 4 }

iscsiTargetStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of iSCSI command/response PDU and octet data
     transfer counters for each of the target instances
     belonging to this iSCSI instance present on this system."
::= { iscsiTargetInfo 4 }

iscsiTargetStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetStatsEntry



Bakke, Muchow             Expires October 2001                 [Page 69]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing iSCSI command/response PDU and octet data
         transfer counters for a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetStatsTable 1 }

IscsiTargetStatsEntry ::= SEQUENCE {
    iscsiTgtTxRspPdus              Counter32,
    iscsiTgtRxCmdPdus              Counter32,
    iscsiTgtTxDataOctets           Counter64,
    iscsiTgtRxDataOctets           Counter64
}

iscsiTgtTxRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were transmitted by this target."
::= { iscsiTargetStatsEntry 1 }

iscsiTgtRxCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were received by this target."
::= { iscsiTargetStatsEntry 2 }

iscsiTgtTxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were transmitted by this target."
::= { iscsiTargetStatsEntry 3 }

iscsiTgtRxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were received by this target."
::= { iscsiTargetStatsEntry 4 }

iscsiTargetCxnErrorStatsTable OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 70]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                         SEQUENCE OF IscsiTargetCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of PDU or timeout connection error counters for
     each of the target instances present on this system."
::= { iscsiTargetInfo 5 }

iscsiTargetCxnErrorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing PDU or time-out connection error
     counters for a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetCxnErrorStatsTable 1 }

IscsiTargetCxnErrorStatsEntry ::= SEQUENCE {
    iscsiTgtHdrDigestErrors        Counter32,
    iscsiTgtDataDigestErrors       Counter32,
    iscsiTgtCxnTimeoutErrors       Counter32,
    iscsiTgtFormatErrors           Counter32
}

iscsiTgtHdrDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the target received which contained
     header digest errors."
::= { iscsiTargetCxnErrorStatsEntry 1 }

iscsiTgtDataDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the target received which contained
     data digest errors."
::= { iscsiTargetCxnErrorStatsEntry 2 }

iscsiTgtCxnTimeoutErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION



Bakke, Muchow             Expires October 2001                 [Page 71]


Internet Draft                  iSCSI MIB                     April 2001


     "A target may set a time limit for completion of a SCSI command
     sequence.  This is the count of sequences which exceeded their
     time limit, causing the target to take some recovery action."
::= { iscsiTargetCxnErrorStatsEntry 3 }

iscsiTgtFormatErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the target received which contained
     a framing error."
::= { iscsiTargetCxnErrorStatsEntry 4 }

iscsiTargetTxRspStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetTxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of response PDUs transmitted by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 6 }

iscsiTargetTxRspStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetTxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of response PDUs transmitted
        by a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetTxRspStatsTable 1 }

IscsiTargetTxRspStatsEntry ::= SEQUENCE {
    iscsiTgtTxNopInPdus            Counter32,
    iscsiTgtTxScsiRspPdus          Counter32,
    iscsiTgtTxScsiTaskMgmtRspPdus  Counter32,
    iscsiTgtTxLoginRspPdus         Counter32,
    iscsiTgtTxTextRspPdus          Counter32,
    iscsiTgtTxScsiDataReadPdus     Counter32,
    iscsiTgtTxLogoutRspPdus        Counter32,
    iscsiTgtTxR2TPdus              Counter32,
    iscsiTgtTxAsyncPdus            Counter32,
    iscsiTgtTxRejectPdus           Counter32
}

iscsiTgtTxNopInPdus OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 72]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of NOP-In PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 1 }

iscsiTgtTxScsiRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Response PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 2 }

iscsiTgtTxScsiTaskMgmtRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Response PDUs
     transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 3 }

iscsiTgtTxLoginRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Login Response PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 4 }

iscsiTgtTxTextRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Text Response PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 5 }

iscsiTgtTxScsiDataReadPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs transmitted by this target in
     reply to a READ command."
::= { iscsiTargetTxRspStatsEntry 6 }



Bakke, Muchow             Expires October 2001                 [Page 73]


Internet Draft                  iSCSI MIB                     April 2001


iscsiTgtTxLogoutRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Response PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 7 }

iscsiTgtTxR2TPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Ready To Transfer (R2T) PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 8 }

iscsiTgtTxAsyncPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Asynchronous Message PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 9 }

iscsiTgtTxRejectPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs transmitted by this target."
::= { iscsiTargetTxRspStatsEntry 10 }

iscsiTargetRxCmdStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetRxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of command PDUs received by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 7 }

iscsiTargetRxCmdStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetRxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of command PDUs received



Bakke, Muchow             Expires October 2001                 [Page 74]


Internet Draft                  iSCSI MIB                     April 2001


        by a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetRxCmdStatsTable 1 }

IscsiTargetRxCmdStatsEntry ::= SEQUENCE {
    iscsiTgtRxNopOutPdus           Counter32,
    iscsiTgtRxScsiCmdPdus          Counter32,
    iscsiTgtRxScsiTaskMgmtCmdPdus  Counter32,
    iscsiTgtRxLoginCmdPdus         Counter32,
    iscsiTgtRxTextCmdPdus          Counter32,
    iscsiTgtRxScsiDataWritePdus    Counter32,
    iscsiTgtRxLogoutCmdPdus        Counter32,
    iscsiTgtRxSnackReqPdus         Counter32
}

iscsiTgtRxNopOutPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of NOP-Out PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 1 }

iscsiTgtRxScsiCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Command PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 2 }

iscsiTgtRxScsiTaskMgmtCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Command PDUs
     received by this target."
::= { iscsiTargetRxCmdStatsEntry 3 }

iscsiTgtRxLoginCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Command PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 4 }




Bakke, Muchow             Expires October 2001                 [Page 75]


Internet Draft                  iSCSI MIB                     April 2001


iscsiTgtRxTextCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Text Command PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 5 }

iscsiTgtRxScsiDataWritePdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Data PDUs received by this target in
     reply to a WRITE command."
::= { iscsiTargetRxCmdStatsEntry 6 }

iscsiTgtRxLogoutCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Command PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 7 }

iscsiTgtRxSnackReqPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SNACK Request PDUs received by this target."
::= { iscsiTargetRxCmdStatsEntry 8 }

iscsiTargetTxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetTxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a Login command, it responds
        with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were transmitted by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 8 }

iscsiTargetTxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetTxStatusStatsEntry



Bakke, Muchow             Expires October 2001                 [Page 76]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were transmitted by
        a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetTxStatusStatsTable 1 }

IscsiTargetTxStatusStatsEntry ::= SEQUENCE {
    iscsiTgtTxStsAccepts           Counter32,
    iscsiTgtTxStsAuthenticates     Counter32,
    iscsiTgtTxStsNameRequireds     Counter32,
    iscsiTgtTxStsMoveTemps         Counter32,
    iscsiTgtTxStsMovePerms         Counter32,
    iscsiTgtTxStsProxyRequireds    Counter32,
    iscsiTgtTxStsAuthFails         Counter32,
    iscsiTgtTxStsForbiddens        Counter32,
    iscsiTgtTxStsNotFounds         Counter32,
    iscsiTgtTxStsRemoveds          Counter32,
    iscsiTgtTxStsConflicts         Counter32,
    iscsiTgtTxStsIsidErrors        Counter32,
    iscsiTgtTxStsTargetErrors      Counter32,
    iscsiTgtTxStsUnavailables      Counter32,
    iscsiTgtTxStsInvalidVersions   Counter32
}

iscsiTgtTxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 1 }

iscsiTgtTxStsAuthenticates OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 2 }

iscsiTgtTxStsNameRequireds OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 77]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 3 }

iscsiTgtTxStsMoveTemps OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0101, Target Moved Temporarily,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 4 }

iscsiTgtTxStsMovePerms OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 5 }

iscsiTgtTxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 6 }

iscsiTgtTxStsAuthFails OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 7 }



Bakke, Muchow             Expires October 2001                 [Page 78]


Internet Draft                  iSCSI MIB                     April 2001


iscsiTgtTxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 8 }

iscsiTgtTxStsNotFounds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 9 }

iscsiTgtTxStsRemoveds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 10 }

iscsiTgtTxStsConflicts OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0205, Target Conflict,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 11 }

iscsiTgtTxStsIsidErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, Initiator SID Error,
     transmitted by this target."



Bakke, Muchow             Expires October 2001                 [Page 79]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiTargetTxStatusStatsEntry 12 }

iscsiTgtTxStsTargetErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 13 }

iscsiTgtTxStsUnavailables OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 14 }

iscsiTgtTxStsInvalidVersions OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     transmitted by this target."
::= { iscsiTargetTxStatusStatsEntry 15 }

iscsiTargetTxRejectStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetTxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When a target receives a message with a format error
        or a digest error, it responds by sending a Reject PDU
        which carries the header of the message in error, as
        well as a reject Reason code which describes the error.
        This table contains a list of counters of Reject PDUs
        of each Reason code, that were transmitted by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 9 }

iscsiTargetTxRejectStatsEntry OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 80]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                         IscsiTargetTxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Reject PDUs
        of each reject Reason code, that were transmitted by
        a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetTxRejectStatsTable 1 }

IscsiTargetTxRejectStatsEntry ::= SEQUENCE {
    iscsiTgtTxRjtFormats           Counter32,
    iscsiTgtTxRjtHdrDigests        Counter32,
    iscsiTgtTxRjtDataDigests       Counter32,
    iscsiTgtTxRjtDataSnacks        Counter32,
    iscsiTgtTxRjtRestarts          Counter32,
    iscsiTgtTxRjtFullFeatures      Counter32
}

iscsiTgtTxRjtFormats OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     1, Format Error, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 1 }

iscsiTgtTxRjtHdrDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     2, Header Digest Error, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 2 }

iscsiTgtTxRjtDataDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     3, Payload Digest Error, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 3 }

iscsiTgtTxRjtDataSnacks OBJECT-TYPE
    SYNTAX                  Counter32



Bakke, Muchow             Expires October 2001                 [Page 81]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     4, Data-SACK Reject, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 4 }

iscsiTgtTxRjtRestarts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     5, Command Retry Reject, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 5 }

iscsiTgtTxRjtFullFeatures OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     15, Full Feature Phase Reject, transmitted by this target."
::= { iscsiTargetTxRejectStatsEntry 6 }

iscsiTargetRxLogoutStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetRxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator sends a Logout PDU to a target to perform
        a controlled closing of a connection.  The Logout PDU
        carries a Reason code, indicating the reason for the Logout.
        This table contains a list of counters of Logout PDUs
        of each Reason code, that were received by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 10 }

iscsiTargetRxLogoutStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetRxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Logout PDUs
        of each Reason code, that were received by
        a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }



Bakke, Muchow             Expires October 2001                 [Page 82]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiTargetRxLogoutStatsTable 1 }

IscsiTargetRxLogoutStatsEntry ::= SEQUENCE {
    iscsiTgtRxLgtSessionCloses     Counter32,
    iscsiTgtRxLgtCxnRecoveries     Counter32,
    iscsiTgtRxLgtTargetRequests    Counter32
}

iscsiTgtRxLgtSessionCloses OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     0, Close the session, received by this target."
::= { iscsiTargetRxLogoutStatsEntry 1 }

iscsiTgtRxLgtCxnRecoveries OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     1, Remove the connection for recovery,
     received by this target."
::= { iscsiTargetRxLogoutStatsEntry 2 }

iscsiTgtRxLgtTargetRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Logout PDUs with Reason code
     2, Remove the connection at target's request,
     received by this target."
::= { iscsiTargetRxLogoutStatsEntry 3 }

iscsiTargetTxAsyncStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiTargetTxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A target sends an Asynchronous Message PDU to report an
        event that does not correspond to a particular command.
        Some events are strictly related to iSCSI, while others
        are related to SCSI.  The Asynchronous Message PDUs includes
        an Event code to describe the iSCSI event.  This table
        contains a list of counters of Asynchronous Message PDUs



Bakke, Muchow             Expires October 2001                 [Page 83]


Internet Draft                  iSCSI MIB                     April 2001


        of each iSCSI Event code, that were transmitted by each
        target instance belonging to this iSCSI instance present
        on this system."
::= { iscsiTargetInfo 11 }

iscsiTargetTxAsyncStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiTargetTxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Asynchronous Message
        PDUs of each iSCSI Event code that were transmitted by
        a particular target instance."
    AUGMENTS { iscsiTargetAttributesEntry }
::= { iscsiTargetTxAsyncStatsTable 1 }

IscsiTargetTxAsyncStatsEntry ::= SEQUENCE {
    iscsiTgtTxAsyTargetResets      Counter32,
    iscsiTgtTxAsyLogoutRequests    Counter32,
    iscsiTgtTxAsyCxnDrops          Counter32
}

iscsiTgtTxAsyTargetResets OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     1, Target is being reset, transmitted by this target."
::= { iscsiTargetTxAsyncStatsEntry 1 }

iscsiTgtTxAsyLogoutRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target requests Logout, transmitted by this target."
::= { iscsiTargetTxAsyncStatsEntry 2 }

iscsiTgtTxAsyCxnDrops OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target indicates it will/has dropped the connection,
     transmitted by this target."



Bakke, Muchow             Expires October 2001                 [Page 84]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiTargetTxAsyncStatsEntry 3 }

----------------------------------------------------------------------

iscsiAccessListInfo OBJECT IDENTIFIER ::= { iscsiTargetObjects 2 }

iscsiAccessListObjects OBJECT IDENTIFIER ::= { iscsiAccessListInfo 1 }
iscsiAccessListScalars OBJECT IDENTIFIER ::= { iscsiAccessListInfo 2 }

iscsiAccessListAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiAccessListAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of iSCSI initiators which will be granted access
     to iSCSI resources through targets within the iSCSI
     instance."
::= { iscsiAccessListInfo 3 }

iscsiAccessListAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiAccessListAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing management information
         applicable to an initiator which is known by a target
         within an iSCSI instance on this node."
    INDEX { iscsiInstIndex, iscsiTgtIndex, iscsiALIndex }
::= { iscsiAccessListAttributesTable  1 }

IscsiAccessListAttributesEntry ::= SEQUENCE {
    iscsiALIndex                   Unsigned32,
    iscsiALInitiatorName           Utf8String
}

iscsiALIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     Access List instance of a particular target instance within an
     iSCSI instance present on the node."
::= { iscsiAccessListAttributesEntry 1 }

iscsiALInitiatorName OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only



Bakke, Muchow             Expires October 2001                 [Page 85]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS                         current
    DESCRIPTION
     "The globally unique name of the initiator, sent to the
     target in the <InitiatorWWUI> key of the Login Command."
::= { iscsiAccessListAttributesEntry 2 }

----------------------------------------------------------------------

iscsiInitiatorInfo OBJECT IDENTIFIER ::= { iscsiInstanceObjects 4 }

iscsiInitiatorObjects OBJECT IDENTIFIER ::= { iscsiInitiatorInfo 1 }
iscsiInitiatorScalars OBJECT IDENTIFIER ::= { iscsiInitiatorInfo 2 }

iscsiInitiatorAttributesTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of initiators belonging to each iSCSI instance
        present on the system."
::= { iscsiInitiatorInfo 3 }

iscsiInitiatorAttributesEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorAttributesEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing managment information applicable
        to a particular initiator instance."
    INDEX  { iscsiInstIndex, iscsiIntrIndex }
::= { iscsiInitiatorAttributesTable 1 }

IscsiInitiatorAttributesEntry ::= SEQUENCE {
    iscsiIntrIndex                 Unsigned32,
    iscsiIntrName                  Utf8String,
    iscsiIntrAlias                 Utf8String
}

iscsiIntrIndex OBJECT-TYPE
    SYNTAX                       Unsigned32 (1..4294967295)
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     Initiator instance within an iSCSI instance present on the node."
::= { iscsiInitiatorAttributesEntry 1 }

iscsiIntrName OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 86]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A text-based identifier for an Initiator that is globally unique. The
     Initiator Name is independent of the location of the initiator and its
     address could be resolved using SLP or a name service."
::= { iscsiInitiatorAttributesEntry 2 }

iscsiIntrAlias OBJECT-TYPE
    SYNTAX                       Utf8String
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A human-readable name or description of the initiator. If
     configured, this initiator alias may be communicated to
     the target during a Login Request message. This string is
     not used as an identifier, but can be displayed by the
     target's user interface in a list of initiators to which it
     is connected."
::= { iscsiInitiatorAttributesEntry 3 }

iscsiInitiatorStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of iSCSI command/response PDU and octet data transfer counters
         for each of the Initiator instance belonging to this iSCSI instance
         present on the system."
::= { iscsiInitiatorInfo 4 }

iscsiInitiatorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing iSCSI command/response PDU and octet data
         transfer counters for a particular Initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorStatsTable 1 }

IscsiInitiatorStatsEntry ::= SEQUENCE {
    iscsiIntrTxCmdPdus             Counter32,
    iscsiIntrRxRspPdus             Counter32,
    iscsiIntrTxDataOctets          Counter64,
    iscsiIntrRxDataOctets          Counter64
}



Bakke, Muchow             Expires October 2001                 [Page 87]


Internet Draft                  iSCSI MIB                     April 2001


iscsiIntrTxCmdPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Command PDUs that were transmitted by this initiator."
::= { iscsiInitiatorStatsEntry 1 }

iscsiIntrRxRspPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Response PDUs that were received by this initiator."
::= { iscsiInitiatorStatsEntry 2 }

iscsiIntrTxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were transmitted by this initiator."
::= { iscsiInitiatorStatsEntry 3 }

iscsiIntrRxDataOctets OBJECT-TYPE
    SYNTAX                       Counter64
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of data octets that were received by this initiator."
::= { iscsiInitiatorStatsEntry 4 }

iscsiInitiatorCxnErrorStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of PDU or timeout connection error counters for
     each of the initiator instances present on this system."
::= { iscsiInitiatorInfo 5 }

iscsiInitiatorCxnErrorStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorCxnErrorStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing PDU or time-out connection error
     counters for a particular initiator instance."



Bakke, Muchow             Expires October 2001                 [Page 88]


Internet Draft                  iSCSI MIB                     April 2001


    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorCxnErrorStatsTable 1 }

IscsiInitiatorCxnErrorStatsEntry ::= SEQUENCE {
    iscsiIntrHdrDigestErrors       Counter32,
    iscsiIntrDataDigestErrors      Counter32,
    iscsiIntrCxnTimeoutErrors      Counter32,
    iscsiIntrFormatErrors          Counter32
}

iscsiIntrHdrDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the initiator received which contained
     header digest errors."
::= { iscsiInitiatorCxnErrorStatsEntry 1 }

iscsiIntrDataDigestErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the initiator received which contained
     data digest errors."
::= { iscsiInitiatorCxnErrorStatsEntry 2 }

iscsiIntrCxnTimeoutErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "A initiator may set a time limit for completion of a SCSI command
     sequence.  This is the count of sequences which exceeded their
     time limit, causing the initiator to take some recovery action."
::= { iscsiInitiatorCxnErrorStatsEntry 3 }

iscsiIntrFormatErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of PDUs which the initiator received which contained
     a framing error."
::= { iscsiInitiatorCxnErrorStatsEntry 4 }

iscsiInitiatorTxCmdStatsTable OBJECT-TYPE



Bakke, Muchow             Expires October 2001                 [Page 89]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                         SEQUENCE OF IscsiInitiatorTxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of command PDUs transmitted by each
        initiator instance belonging to this iSCSI instance present
        on this system."
::= { iscsiInitiatorInfo 6 }

iscsiInitiatorTxCmdStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorTxCmdStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of command PDUs transmitted
        by a particular initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorTxCmdStatsTable 1 }

IscsiInitiatorTxCmdStatsEntry ::= SEQUENCE {
    iscsiIntrTxNopOutPdus          Counter32,
    iscsiIntrTxScsiCmdPdus         Counter32,
    iscsiIntrTxScsiTaskMgmtCmdPdus Counter32,
    iscsiIntrTxLoginCmdPdus        Counter32,
    iscsiIntrTxTextCmdPdus         Counter32,
    iscsiIntrTxScsiDataWritePdus   Counter32,
    iscsiIntrTxLogoutCmdPdus       Counter32,
    iscsiIntrTxSnackReqPdus        Counter32
}

iscsiIntrTxNopOutPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of NOP-Out PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 1 }

iscsiIntrTxScsiCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SCSI Command PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 2 }

iscsiIntrTxScsiTaskMgmtCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32



Bakke, Muchow             Expires October 2001                 [Page 90]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Command PDUs
     transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 3 }

iscsiIntrTxLoginCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Command PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 4 }

iscsiIntrTxTextCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Text Command PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 5 }

iscsiIntrTxScsiDataWritePdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs transmitted by this initiator following a WRITE
     command or in reply to Ready To Transfer (R2T) command from the target
     during a WRITE command."
::= { iscsiInitiatorTxCmdStatsEntry 6 }

iscsiIntrTxLogoutCmdPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Command PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 7 }

iscsiIntrTxSnackReqPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of SNACK Request PDUs transmitted by this initiator."
::= { iscsiInitiatorTxCmdStatsEntry 8 }



Bakke, Muchow             Expires October 2001                 [Page 91]


Internet Draft                  iSCSI MIB                     April 2001


iscsiInitiatorRxRspStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorRxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "A list of counters of response PDUs received by each
        initiator instance belonging to this iSCSI instance present
        on this system."
::= { iscsiInitiatorInfo 7 }

iscsiInitiatorRxRspStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorRxRspStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of response PDUs received
        by a particular initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorRxRspStatsTable 1 }

IscsiInitiatorRxRspStatsEntry ::= SEQUENCE {
    iscsiIntrRxNopInPdus           Counter32,
    iscsiIntrRxScsiRspPdus         Counter32,
    iscsiIntrRxScsiTaskMgmtRspPdus Counter32,
    iscsiIntrRxLoginRspPdus        Counter32,
    iscsiIntrRxTextRspPdus         Counter32,
    iscsiIntrRxScsiDataReadPdus    Counter32,
    iscsiIntrRxLogoutRspPdus       Counter32,
    iscsiIntrRxR2TPdus             Counter32,
    iscsiIntrRxAsyncPdus           Counter32,
    iscsiIntrRxRejectPdus          Counter32
}

iscsiIntrRxNopInPdus OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of NOP-In PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 1 }

iscsiIntrRxScsiRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Response PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 2 }



Bakke, Muchow             Expires October 2001                 [Page 92]


Internet Draft                  iSCSI MIB                     April 2001


iscsiIntrRxScsiTaskMgmtRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Task Management Response PDUs
     received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 3 }

iscsiIntrRxLoginRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Login Response PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 4 }

iscsiIntrRxTextRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Text Response PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 5 }

iscsiIntrRxScsiDataReadPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of SCSI Data PDUs received by this initiator in
     reply to a READ command."
::= { iscsiInitiatorRxRspStatsEntry 6 }

iscsiIntrRxLogoutRspPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout Response PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 7 }

iscsiIntrRxR2TPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Ready To Transfer (R2T) PDUs received by this initiator."



Bakke, Muchow             Expires October 2001                 [Page 93]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiInitiatorRxRspStatsEntry 8 }

iscsiIntrRxAsyncPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Asynchronous Message PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 9 }

iscsiIntrRxRejectPdus OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs received by this initiator."
::= { iscsiInitiatorRxRspStatsEntry 10 }

iscsiInitiatorRxStatusStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorRxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "When an initiator attempts send a Login command, the target
        responds with a Login Response that carries a status code.
        This table contains a list of counters of Login Response
        PDUs of each status code, that were received by each
        initiator instance belonging to this iSCSI instance present
        on this system."
::= { iscsiInitiatorInfo 8 }

iscsiInitiatorRxStatusStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorRxStatusStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Login Response
        PDUs of each status code, that were received by
        a particular initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorRxStatusStatsTable 1 }

IscsiInitiatorRxStatusStatsEntry ::= SEQUENCE {
    iscsiIntrRxStsAccepts          Counter32,
    iscsiIntrRxStsAuthenticates    Counter32,
    iscsiIntrRxStsNameRequireds    Counter32,
    iscsiIntrRxStsMoveTemps        Counter32,
    iscsiIntrRxStsMovePerms        Counter32,



Bakke, Muchow             Expires October 2001                 [Page 94]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiIntrRxStsProxyRequireds   Counter32,
    iscsiIntrRxStsAuthFails        Counter32,
    iscsiIntrRxStsForbiddens       Counter32,
    iscsiIntrRxStsNotFounds        Counter32,
    iscsiIntrRxStsRemoveds         Counter32,
    iscsiIntrRxStsConflicts        Counter32,
    iscsiIntrRxStsIsidErrors       Counter32,
    iscsiIntrRxStsTargetErrors     Counter32,
    iscsiIntrRxStsUnavailables     Counter32,
    iscsiIntrRxStsInvalidVersions  Counter32
}

iscsiIntrRxStsAccepts OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0000, Accept Login,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 1 }

iscsiIntrRxStsAuthenticates OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0001, Authenticate,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 2 }

iscsiIntrRxStsNameRequireds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0002, Target Name Required,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 3 }

iscsiIntrRxStsMoveTemps OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status



Bakke, Muchow             Expires October 2001                 [Page 95]


Internet Draft                  iSCSI MIB                     April 2001


     0x0101, Target Moved Temporarily,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 4 }

iscsiIntrRxStsMovePerms OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0102, Target Moved Permanently,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 5 }

iscsiIntrRxStsProxyRequireds OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0103, Proxy Required,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 6 }

iscsiIntrRxStsAuthFails OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0201, Authentication Failed,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 7 }

iscsiIntrRxStsForbiddens OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0202, Forbidden Target,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 8 }

iscsiIntrRxStsNotFounds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current



Bakke, Muchow             Expires October 2001                 [Page 96]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0203, Not Found,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 9 }

iscsiIntrRxStsRemoveds OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0204, Target Removed,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 10 }

iscsiIntrRxStsConflicts OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0205, Target Conflict,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 11 }

iscsiIntrRxStsIsidErrors OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0206, initiator SID Error,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 12 }

iscsiIntrRxStsTargetErrors OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0300, Target Error,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 13 }

iscsiIntrRxStsUnavailables OBJECT-TYPE
    SYNTAX                       Counter32



Bakke, Muchow             Expires October 2001                 [Page 97]


Internet Draft                  iSCSI MIB                     April 2001


    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0301, Service Unavailable,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 14 }

iscsiIntrRxStsInvalidVersions OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Login Response PDUs with status
     0x0302, Unsupported Version,
     received by this initiator."
::= { iscsiInitiatorRxStatusStatsEntry 15 }

iscsiInitiatorRxRejectStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorRxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An Initiator receives a Reject PDU from the target when the target
         cannot proceed with the task requested by the initiator because of
         a format error, a digest error, and other errors. A Reject PDU contains
         a reject Reason code which describes the error. This table contains a
         list of counters of Reject PDUs of each Reason code, that were
         received by each Initiator instance belonging to this iSCSI instance
         present on the system."
::= { iscsiInitiatorInfo 9 }

iscsiInitiatorRxRejectStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorRxRejectStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Reject PDUs
        of each reject Reason code, that were received by
        a particular initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorRxRejectStatsTable 1 }

IscsiInitiatorRxRejectStatsEntry ::= SEQUENCE {
    iscsiIntrRxRjtFormats          Counter32,
    iscsiIntrRxRjtHdrDigests       Counter32,
    iscsiIntrRxRjtDataDigests      Counter32,
    iscsiIntrRxRjtDataSnacks       Counter32,



Bakke, Muchow             Expires October 2001                 [Page 98]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiIntrRxRjtRestarts         Counter32,
    iscsiIntrRxRjtFullFeatures     Counter32
}

iscsiIntrRxRjtFormats OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     1, Format Error, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 1 }

iscsiIntrRxRjtHdrDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     2, Header Digest Error, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 2 }

iscsiIntrRxRjtDataDigests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     3, Payload Digest Error, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 3 }

iscsiIntrRxRjtDataSnacks OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     4, Data-SACK Reject, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 4 }

iscsiIntrRxRjtRestarts OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     5, Command Retry Reject, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 5 }



Bakke, Muchow             Expires October 2001                 [Page 99]


Internet Draft                  iSCSI MIB                     April 2001


iscsiIntrRxRjtFullFeatures OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Reject PDUs with Reason code
     15, Full Feature Phase Reject, received by this initiator."
::= { iscsiInitiatorRxRejectStatsEntry 6 }

iscsiInitiatorTxLogoutStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorTxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator sends a Logout PDU to a target to perform a controlled
         closing of a connection.  The Logout PDU carries a Reason code,
         indicating the reason for the Logout. This table contains a list of
         counters of Logout PDUs of each Reason code, that were transmitted by
         each Initiator instance belonging to this iSCSI instance present on
         the system."
::= { iscsiInitiatorInfo 10 }

iscsiInitiatorTxLogoutStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorTxLogoutStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Logout PDUs of each Reason code,
         that were transmitted by a particular Initiator instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorTxLogoutStatsTable 1 }

IscsiInitiatorTxLogoutStatsEntry ::= SEQUENCE {
    iscsiIntrTxLgtSessionCloses    Counter32,
    iscsiIntrTxLgtCxnRecoveries    Counter32,
    iscsiIntrTxLgtTargetRequests   Counter32
}

iscsiIntrTxLgtSessionCloses OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     0, Close the session, transmitted by this initiator."
::= { iscsiInitiatorTxLogoutStatsEntry 1 }

iscsiIntrTxLgtCxnRecoveries OBJECT-TYPE



Bakke, Muchow             Expires October 2001                [Page 100]


Internet Draft                  iSCSI MIB                     April 2001


    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Logout PDUs with Reason code
     1, Remove the connection for recovery,
     transmitted by this initiator."
::= { iscsiInitiatorTxLogoutStatsEntry 2 }

iscsiIntrTxLgtTargetRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
     "The count of Logout PDUs with Reason code
     2, Remove the connection at initiator's request,
     transmitted by this initiator."
::= { iscsiInitiatorTxLogoutStatsEntry 3 }

iscsiInitiatorRxAsyncStatsTable OBJECT-TYPE
    SYNTAX                         SEQUENCE OF IscsiInitiatorRxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An initiator receives an Asynchronous Message PDU from a target to
         report an event that does not correspond to a particular command.
         Some events are strictly related to iSCSI, while others are related to
         SCSI.  The Asynchronous Message PDU includes an Event code to describe
         the iSCSI event.  This table contains a list of counters of
         Asynchronous Message PDUs of each iSCSI Event code, that were received
         by each Initiator instance belonging to this iSCSI instance present on
         the system."
::= { iscsiInitiatorInfo 11 }

iscsiInitiatorRxAsyncStatsEntry OBJECT-TYPE
    SYNTAX                         IscsiInitiatorRxAsyncStatsEntry
    MAX-ACCESS                     not-accessible
    STATUS                         current
    DESCRIPTION
        "An entry (row) containing counters of Asynchronous Message PDUs of each
         iSCSI Event code that were received by a particular Initiator
         instance."
    AUGMENTS { iscsiInitiatorAttributesEntry }
::= { iscsiInitiatorRxAsyncStatsTable 1 }

IscsiInitiatorRxAsyncStatsEntry ::= SEQUENCE {
    iscsiIntrRxAsyTargetResets     Counter32,
    iscsiIntrRxAsyLogoutRequests   Counter32,



Bakke, Muchow             Expires October 2001                [Page 101]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiIntrRxAsyCxnDrops         Counter32
}

iscsiIntrRxAsyTargetResets OBJECT-TYPE
    SYNTAX                       Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     1, Target is being reset, received by this initiator."
::= { iscsiInitiatorRxAsyncStatsEntry 1 }

iscsiIntrRxAsyLogoutRequests OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target requests Logout, received by this initiator."
::= { iscsiInitiatorRxAsyncStatsEntry 2 }

iscsiIntrRxAsyCxnDrops OBJECT-TYPE
    SYNTAX                  Counter32
    MAX-ACCESS                     read-only
    STATUS                         current
    DESCRIPTION
        "The count of Asynchronous Message PDUs with iSCSI Event code
     2, Target indicates it will/has dropped the connection,
     received by this initiator."
::= { iscsiInitiatorRxAsyncStatsEntry 3 }

------------------------------------------------------------------------
-- Notifications

-- First, define a dummy number to allow SMIv2 Notifications to be
-- converted to SMIv1 Traps
iscsiNotificationsPrefix OBJECT IDENTIFIER ::= { iscsiNotifications 0 }

------------------------------------------------------------------------

-- Conformance Statements

iscsiGroups OBJECT IDENTIFIER ::= { iscsiConformance 1 }

iscsiInstanceAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiInstanceNumber,
        iscsiInstName,



Bakke, Muchow             Expires October 2001                [Page 102]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiInstVersionMin,
        iscsiInstVersionMax,
        iscsiInstVendorID,
        iscsiInstVendorVersion,
        iscsiInstListenPortNumber,
        iscsiInstSessionNumber,
        iscsiInstTargetNumber,
        iscsiInstInitiatorNumber,
     iscsiInstNameServiceIpAddr,
     iscsiInstNameServicePort,
     iscsiInstNameServiceType
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 1 }

iscsiInstanceStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiInstTxCmdPdus,
        iscsiInstTxRspPdus,
        iscsiInstRxRspPdus,
        iscsiInstRxCmdPdus,
        iscsiInstTxDataOctets,
        iscsiInstRxDataOctets
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 2 }

iscsiInstanceCxnErrorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiInstHdrDigestErrors,
        iscsiInstDataDigestErrors,
        iscsiInstCxnTimeoutErrors,
        iscsiInstFormatErrors
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 3 }

iscsiListenPortAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiLPProtocol,
        iscsiLPIpAddress,
        iscsiLPTcpPort



Bakke, Muchow             Expires October 2001                [Page 103]


Internet Draft                  iSCSI MIB                     April 2001


    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 4 }

iscsiListenPortCxnStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiLPCxnCreations,
     iscsiLPCxnRefusals,
     iscsiLPCxnRefusalReason,
     iscsiLPCxnTerminations,
     iscsiLPCxnTerminationReason,
        iscsiLPCxnShutdowns
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 5 }

iscsiListenPortCnxErrorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiLPHdrDigestErrors,
        iscsiLPDataDigestErrors,
        iscsiLPCxnTimeoutErrors,
        iscsiLPFormatErrors
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 6 }

iscsiListenPortTxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiLPTxStsAccepts,
        iscsiLPTxStsAuthenticates,
        iscsiLPTxStsNameRequireds,
        iscsiLPTxStsMoveTemps,
        iscsiLPTxStsMovePerms,
        iscsiLPTxStsProxyRequireds,
        iscsiLPTxStsAuthFails,
        iscsiLPTxStsForbiddens,
        iscsiLPTxStsNotFounds,
        iscsiLPTxStsRemoveds,
        iscsiLPTxStsConflicts,
        iscsiLPTxStsIsidErrors,
        iscsiLPTxStsTargetErrors,
        iscsiLPTxStsUnavailables,



Bakke, Muchow             Expires October 2001                [Page 104]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiLPTxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 7 }

iscsiListenPortRxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
     iscsiLPRxStsAccepts,
        iscsiLPRxStsAuthenticates,
        iscsiLPRxStsNameRequireds,
        iscsiLPRxStsMoveTemps,
        iscsiLPRxStsMovePerms,
        iscsiLPRxStsProxyRequireds,
        iscsiLPRxStsAuthFails,
        iscsiLPRxStsForbiddens,
        iscsiLPRxStsNotFounds,
        iscsiLPRxStsRemoveds,
        iscsiLPRxStsConflicts,
        iscsiLPRxStsIsidErrors,
        iscsiLPRxStsTargetErrors,
        iscsiLPRxStsUnavailables,
        iscsiLPRxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 8 }

iscsiSessionAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnType,
        iscsiSsnTargetName,
        iscsiSsnInitiatorName,
        iscsiSsnUseR2t,
        iscsiSsnBidirectionalUseR2t,
        iscsiSsnImmediateData,
        iscsiSsnEnableCmdRn,
        iscsiSsnInDataOrder,
        iscsiSsnBootSession,
        iscsiSsnMaxOutstandingR2t,
        iscsiSsnMaxDataPduLength,
        iscsiSsnFirstBurstSize,
        iscsiSsnInitiatorTagLength,
        iscsiSsnPingMaxReplyLength,
        iscsiSsnMaxTotalText,
        iscsiSsnKeyValueText,



Bakke, Muchow             Expires October 2001                [Page 105]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiSsnConnectionNumber,
        iscsiSsnMaxConnections,
        iscsiSsnHeaderIntegrity,
        iscsiSsnDataIntegrity,
        iscsiSsnInitiatorAuth,
        iscsiSsnTargetAuth,
        iscsiSsnInitiatorUserName,
        iscsiSsnTargetUserName,
        iscsiSsnFramingScheme
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 9 }

iscsiSessionStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxCmdPdus,
        iscsiSsnTxRspPdus,
        iscsiSsnRxRspPdus,
        iscsiSsnRxCmdPdus,
        iscsiSsnTxDataOctets,
        iscsiSsnRxDataOctets
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 10 }

iscsiSessionCxnErrorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnHdrDigestErrors,
        iscsiSsnDataDigestErrors,
        iscsiSsnCxnTimeoutErrors,
        iscsiSsnFormatErrors
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 11 }

iscsiSessionTxCmdStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxNopOutPdus,
        iscsiSsnTxScsiCmdPdus,
        iscsiSsnTxScsiTaskMgmtCmdPdus,
        iscsiSsnTxLoginCmdPdus,
        iscsiSsnTxTextCmdPdus,



Bakke, Muchow             Expires October 2001                [Page 106]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiSsnTxScsiDataWritePdus,
        iscsiSsnTxLogoutCmdPdus,
        iscsiSsnTxSnackReqPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 12 }

iscsiSessionRxCmdStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnRxNopInPdus,
        iscsiSsnRxScsiRspPdus,
        iscsiSsnRxScsiTaskMgmtRspPdus,
        iscsiSsnRxLoginRspPdus,
        iscsiSsnRxTextRspPdus,
        iscsiSsnRxScsiDataReadPdus,
        iscsiSsnRxLogoutRspPdus,
        iscsiSsnRxR2TPdus,
        iscsiSsnRxAsyncPdus,
        iscsiSsnRxRejectPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 13 }

iscsiSessionTxRspStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxNopInPdus,
        iscsiSsnTxScsiRspPdus,
        iscsiSsnTxScsiTaskMgmtRspPdus,
        iscsiSsnTxLoginRspPdus,
        iscsiSsnTxTextRspPdus,
        iscsiSsnTxScsiDataReadPdus,
        iscsiSsnTxLogoutRspPdus,
        iscsiSsnTxR2TPdus,
        iscsiSsnTxAsyncPdus,
        iscsiSsnTxRejectPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 14 }


iscsiSessionRxRspStatsGroup OBJECT-GROUP
    OBJECTS {



Bakke, Muchow             Expires October 2001                [Page 107]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiSsnRxNopOutPdus,
        iscsiSsnRxScsiCmdPdus,
        iscsiSsnRxScsiTaskMgmtCmdPdus,
        iscsiSsnRxLoginCmdPdus,
        iscsiSsnRxTextCmdPdus,
        iscsiSsnRxScsiDataWritePdus,
        iscsiSsnRxLogoutCmdPdus,
        iscsiSsnRxSnackReqPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 15 }

iscsiSessionTxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxStsAccepts,
        iscsiSsnTxStsAuthenticates,
        iscsiSsnTxStsNameRequireds,
        iscsiSsnTxStsMoveTemps,
        iscsiSsnTxStsMovePerms,
        iscsiSsnTxStsProxyRequireds,
        iscsiSsnTxStsAuthFails,
        iscsiSsnTxStsForbiddens,
        iscsiSsnTxStsNotFounds,
        iscsiSsnTxStsRemoveds,
        iscsiSsnTxStsConflicts,
        iscsiSsnTxStsIsidErrors,
        iscsiSsnTxStsTargetErrors,
        iscsiSsnTxStsUnavailables,
        iscsiSsnTxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 16 }

iscsiSessionTxRejectsStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxRjtFormats,
        iscsiSsnTxRjtHdrDigests,
        iscsiSsnTxRjtDataDigests,
        iscsiSsnTxRjtDataSnacks,
        iscsiSsnTxRjtRestarts,
        iscsiSsnTxRjtFullFeatures
    }
    STATUS current
    DESCRIPTION



Bakke, Muchow             Expires October 2001                [Page 108]


Internet Draft                  iSCSI MIB                     April 2001


        "."
::= { iscsiGroups 17 }

iscsiSessionTxLogoutStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxLgtSessionCloses,
        iscsiSsnTxLgtCxnRecoveries,
        iscsiSsnTxLgtTargetRequests
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 18 }

iscsiSessionTxAsyncStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnTxAsyTargetResets,
        iscsiSsnTxAsyLogoutRequests,
        iscsiSsnTxAsyCxnDrops
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 19 }

iscsiSessionRxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnRxStsAccepts,
        iscsiSsnRxStsAuthenticates,
        iscsiSsnRxStsNameRequireds,
        iscsiSsnRxStsMoveTemps,
        iscsiSsnRxStsMovePerms,
        iscsiSsnRxStsProxyRequireds,
        iscsiSsnRxStsAuthFails,
        iscsiSsnRxStsForbiddens,
        iscsiSsnRxStsNotFounds,
        iscsiSsnRxStsRemoveds,
        iscsiSsnRxStsConflicts,
        iscsiSsnRxStsIsidErrors,
        iscsiSsnRxStsTargetErrors,
        iscsiSsnRxStsUnavailables,
        iscsiSsnRxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 20 }




Bakke, Muchow             Expires October 2001                [Page 109]


Internet Draft                  iSCSI MIB                     April 2001


iscsiSessionRxRejectsStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnRxRjtFormats,
        iscsiSsnRxRjtHdrDigests,
        iscsiSsnRxRjtDataDigests,
        iscsiSsnRxRjtDataSnacks,
        iscsiSsnRxRjtRestarts,
        iscsiSsnRxRjtFullFeatures
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 21 }

iscsiSessionRxLogoutStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnRxLgtSessionCloses,
        iscsiSsnRxLgtCxnRecoveries,
        iscsiSsnRxLgtTargetRequests
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 22 }

iscsiSessionRxAsyncStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiSsnRxAsyTargetResets,
        iscsiSsnRxAsyLogoutRequests,
        iscsiSsnRxAsyCxnDrops
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 23 }

iscsiConnectionAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiCxnState,
        iscsiCxnProtocol,
        iscsiCxnLocalIpAddress,
        iscsiCxnLocalTcpPort,
        iscsiCxnRemoteIpAddress,
        iscsiCxnRemoteTcpPort
    }
    STATUS current
    DESCRIPTION
        "."



Bakke, Muchow             Expires October 2001                [Page 110]


Internet Draft                  iSCSI MIB                     April 2001


::= { iscsiGroups 24 }

iscsiTargetAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtName,
        iscsiTgtAlias,
        iscsiTgtScsiAttributes
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 25 }

iscsiTargetStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtTxRspPdus,
        iscsiTgtRxCmdPdus,
        iscsiTgtTxDataOctets,
        iscsiTgtRxDataOctets
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 26 }

iscsiTargetCxnErrorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtHdrDigestErrors,
        iscsiTgtDataDigestErrors,
        iscsiTgtCxnTimeoutErrors,
        iscsiTgtFormatErrors
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 27 }

iscsiTargetTxRspStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtTxNopInPdus,
        iscsiTgtTxScsiRspPdus,
        iscsiTgtTxScsiTaskMgmtRspPdus,
        iscsiTgtTxLoginRspPdus,
        iscsiTgtTxTextRspPdus,
        iscsiTgtTxScsiDataReadPdus,
        iscsiTgtTxLogoutRspPdus,
        iscsiTgtTxR2TPdus,
        iscsiTgtTxAsyncPdus,



Bakke, Muchow             Expires October 2001                [Page 111]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiTgtTxRejectPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 28 }

iscsiTargetRxCmdStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtRxNopOutPdus,
        iscsiTgtRxScsiCmdPdus,
        iscsiTgtRxScsiTaskMgmtCmdPdus,
        iscsiTgtRxLoginCmdPdus,
        iscsiTgtRxTextCmdPdus,
        iscsiTgtRxScsiDataWritePdus,
        iscsiTgtRxLogoutCmdPdus,
        iscsiTgtRxSnackReqPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 29 }

iscsiTargetTxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtTxStsAccepts,
        iscsiTgtTxStsAuthenticates,
        iscsiTgtTxStsNameRequireds,
        iscsiTgtTxStsMoveTemps,
        iscsiTgtTxStsMovePerms,
        iscsiTgtTxStsProxyRequireds,
        iscsiTgtTxStsAuthFails,
        iscsiTgtTxStsForbiddens,
        iscsiTgtTxStsNotFounds,
        iscsiTgtTxStsRemoveds,
        iscsiTgtTxStsConflicts,
        iscsiTgtTxStsIsidErrors,
        iscsiTgtTxStsTargetErrors,
        iscsiTgtTxStsUnavailables,
        iscsiTgtTxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 30 }

iscsiTargetTxRejectStatsGroup OBJECT-GROUP
    OBJECTS {



Bakke, Muchow             Expires October 2001                [Page 112]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiTgtTxRjtFormats,
        iscsiTgtTxRjtHdrDigests,
        iscsiTgtTxRjtDataDigests,
        iscsiTgtTxRjtDataSnacks,
        iscsiTgtTxRjtRestarts,
        iscsiTgtTxRjtFullFeatures
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 31 }

iscsiTargetRxLogoutStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtRxLgtSessionCloses,
        iscsiTgtRxLgtCxnRecoveries,
        iscsiTgtRxLgtTargetRequests
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 32 }

iscsiTargetTxAsyncStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiTgtTxAsyTargetResets,
        iscsiTgtTxAsyLogoutRequests,
        iscsiTgtTxAsyCxnDrops
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 33 }

iscsiAccessListAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiALInitiatorName
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 34 }

iscsiInitiatorAttributesGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrName,
        iscsiIntrAlias
    }



Bakke, Muchow             Expires October 2001                [Page 113]


Internet Draft                  iSCSI MIB                     April 2001


    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 35 }

iscsiInitiatorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrTxCmdPdus,
        iscsiIntrRxRspPdus,
        iscsiIntrTxDataOctets,
        iscsiIntrRxDataOctets
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 36 }

iscsiInitiatorCxnErrorStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrHdrDigestErrors,
        iscsiIntrDataDigestErrors,
        iscsiIntrCxnTimeoutErrors,
        iscsiIntrFormatErrors
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 37 }

iscsiInitiatorTxCmdStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrTxNopOutPdus,
        iscsiIntrTxScsiCmdPdus,
        iscsiIntrTxScsiTaskMgmtCmdPdus,
        iscsiIntrTxLoginCmdPdus,
        iscsiIntrTxTextCmdPdus,
        iscsiIntrTxScsiDataWritePdus,
        iscsiIntrTxLogoutCmdPdus,
        iscsiIntrTxSnackReqPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 38 }

iscsiInitiatorRxRspStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrRxNopInPdus,



Bakke, Muchow             Expires October 2001                [Page 114]


Internet Draft                  iSCSI MIB                     April 2001


        iscsiIntrRxScsiRspPdus,
        iscsiIntrRxScsiTaskMgmtRspPdus,
        iscsiIntrRxLoginRspPdus,
        iscsiIntrRxTextRspPdus,
        iscsiIntrRxScsiDataReadPdus,
        iscsiIntrRxLogoutRspPdus,
     iscsiIntrRxR2TPdus,
     iscsiIntrRxAsyncPdus,
     iscsiIntrRxRejectPdus
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 39 }

iscsiInitiatorRxStatusStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrRxStsAccepts,
        iscsiIntrRxStsAuthenticates,
        iscsiIntrRxStsNameRequireds,
        iscsiIntrRxStsMoveTemps,
        iscsiIntrRxStsMovePerms,
        iscsiIntrRxStsProxyRequireds,
        iscsiIntrRxStsAuthFails,
        iscsiIntrRxStsForbiddens,
        iscsiIntrRxStsNotFounds,
        iscsiIntrRxStsRemoveds,
        iscsiIntrRxStsConflicts,
        iscsiIntrRxStsIsidErrors,
        iscsiIntrRxStsTargetErrors,
        iscsiIntrRxStsUnavailables,
        iscsiIntrRxStsInvalidVersions
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 40 }

iscsiInitiatorRxRejectStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrRxRjtFormats,
        iscsiIntrRxRjtHdrDigests,
        iscsiIntrRxRjtDataDigests,
        iscsiIntrRxRjtDataSnacks,
        iscsiIntrRxRjtRestarts,
        iscsiIntrRxRjtFullFeatures
    }
    STATUS current



Bakke, Muchow             Expires October 2001                [Page 115]


Internet Draft                  iSCSI MIB                     April 2001


    DESCRIPTION
        "."
::= { iscsiGroups 41 }

iscsiInitiatorTxLogoutStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrTxLgtSessionCloses,
        iscsiIntrTxLgtCxnRecoveries,
        iscsiIntrTxLgtTargetRequests
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 42 }

iscsiInitiatorRxAsyncStatsGroup OBJECT-GROUP
    OBJECTS {
        iscsiIntrRxAsyTargetResets,
        iscsiIntrRxAsyLogoutRequests,
        iscsiIntrRxAsyCxnDrops
    }
    STATUS current
    DESCRIPTION
        "."
::= { iscsiGroups 43 }

iscsiCompliances OBJECT IDENTIFIER ::= { iscsiConformance 2 }

iscsiFullComplianceV1 MODULE-COMPLIANCE
STATUS                current
DESCRIPTION
    "Will probably change so we'll label it V(ersion)1. It
    includes the Lun and Lu objects which are probably going
    to be removed at some point."
MODULE                -- this module
MANDATORY-GROUPS      {
    iscsiInstanceAttributesGroup,
    iscsiInstanceStatsGroup,
    iscsiInstanceCxnErrorStatsGroup,
    iscsiListenPortAttributesGroup,
    iscsiListenPortCxnStatsGroup,
    iscsiListenPortCnxErrorStatsGroup,
    iscsiListenPortTxStatusStatsGroup,
    iscsiListenPortRxStatusStatsGroup,
    iscsiSessionAttributesGroup,
    iscsiSessionStatsGroup,
    iscsiSessionCxnErrorStatsGroup,
    iscsiSessionTxCmdStatsGroup,



Bakke, Muchow             Expires October 2001                [Page 116]


Internet Draft                  iSCSI MIB                     April 2001


    iscsiSessionRxCmdStatsGroup,
    iscsiSessionTxRspStatsGroup,
    iscsiSessionRxRspStatsGroup,
    iscsiSessionTxStatusStatsGroup,
    iscsiSessionTxRejectsStatsGroup,
    iscsiSessionTxLogoutStatsGroup,
    iscsiSessionTxAsyncStatsGroup,
    iscsiSessionRxStatusStatsGroup,
    iscsiSessionRxRejectsStatsGroup,
    iscsiSessionRxLogoutStatsGroup,
    iscsiSessionRxAsyncStatsGroup,
    iscsiConnectionAttributesGroup,
    iscsiTargetAttributesGroup,
    iscsiTargetStatsGroup,
    iscsiTargetCxnErrorStatsGroup,
    iscsiTargetTxRspStatsGroup,
    iscsiTargetRxCmdStatsGroup,
    iscsiTargetTxStatusStatsGroup,
    iscsiTargetTxRejectStatsGroup,
    iscsiTargetRxLogoutStatsGroup,
    iscsiTargetTxAsyncStatsGroup,
    iscsiAccessListAttributesGroup,
    iscsiInitiatorAttributesGroup,
    iscsiInitiatorStatsGroup,
    iscsiInitiatorCxnErrorStatsGroup,
    iscsiInitiatorTxCmdStatsGroup,
    iscsiInitiatorRxRspStatsGroup,
    iscsiInitiatorRxStatusStatsGroup,
    iscsiInitiatorRxRejectStatsGroup,
    iscsiInitiatorTxLogoutStatsGroup,
    iscsiInitiatorRxAsyncStatsGroup
    }
::= { iscsiCompliances 2 }

END



7.  Security Considerations

   This MIB currently contains no read-write, read-create, or RowStatus
   variables, and cannot be directly used to affect the configuration or
   operation of an iSCSI entity.

   Information gleaned from this MIB could be used to make connections
   to the iSCSI targets it represents.  However, it is the responsbility
   of the initiators and targets involved to authenticate each other to
   ensure that an inappropriately advertised or discovered initiator or



Bakke, Muchow             Expires October 2001                [Page 117]


Internet Draft                  iSCSI MIB                     April 2001


   target does not compromise their security.  These issues are
   discussed in [ISCSI].

8.  References

[ISCSI]     Satran, J., et. al., "iSCSI", draft-ietf-ips-iSCSI-05, March
            2001.

[RFC2571]   Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture
            for Describing SNMP Management Frameworks", RFC 2571, April
            1999.

[RFC1155]   Rose, M., and K. McCloghrie, "Structure and Identification
            of Management Information for TCP/IP-based Internets", STD
            16, RFC 1155, May 1990.

[RFC1212]   Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD
            16, RFC 1212, March 1991.

[RFC1215]   M. Rose, "A Convention for Defining Traps for use with the
            SNMP", RFC 1215, March 1991.

[RFC2578]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Structure of Management
            Information Version 2 (SMIv2)", STD 58, RFC 2578, April
            1999.

[RFC2579]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Textual Conventions for
            SMIv2", STD 58, RFC 2579, April 1999.

[RFC2580]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Conformance Statements for
            SMIv2", STD 58, RFC 2580, April 1999.

[RFC1157]   Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
            Network Management Protocol", STD 15, RFC 1157, May 1990.

[RFC1901]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Introduction to Community-based SNMPv2", RFC 1901, January
            1996.

[RFC1906]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Transport Mappings for Version 2 of the Simple Network
            Management Protocol (SNMPv2)", RFC 1906, January 1996.

[RFC2572]   Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message
            Processing and Dispatching for the Simple Network Management



Bakke, Muchow             Expires October 2001                [Page 118]


Internet Draft                  iSCSI MIB                     April 2001


            Protocol (SNMP)", RFC 2572, April 1999.

[RFC2574]   Blumenthal, U., and B. Wijnen, "User-based Security Model
            (USM) for version 3 of the Simple Network Management
            Protocol (SNMPv3)", RFC 2574, April 1999.

[RFC1905]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Protocol Operations for Version 2 of the Simple Network
            Management Protocol (SNMPv2)", RFC 1905, January 1996.

[RFC2573]   Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications",
            RFC 2573, April 1999.

[RFC2575]   Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
            Access Control Model (VACM) for the Simple Network
            Management Protocol (SNMP)", RFC 2575, April 1999.

[RFC2570]   Case, J., Mundy, R., Partain, D., and B. Stewart,
            "Introduction to Version 3 of the Internet-standard Network
            Management Framework", RFC 2570, April 1999.

[RFC2012]   K. McCloghrie, "SNMPv2 Management Information Base for the
            Transmission Control Protocol using SMIv2", RFC 2012,
            November 1996.

9.  Authors' Addresses

       Mark Bakke
       Postal: Cisco Systems, Inc
       6450 Wedgwood Road, Suite 130
       Maple Grove, MN
       USA 55311

       Tel: +1 763-398-1000
       Fax: +1 763-398-1001

       E-mail: mbakke@cisco.com

       Marjorie Krueger
       Postal: Hewlett-Packard
       Networked Storage Architecture
       Networked Storage Solutions Org.
       8000 Foothills Blvd.
       Roseville, CA 95747

       Tel: +1 916-785-2656
       Tel: +1 916-785-0391




Bakke, Muchow             Expires October 2001                [Page 119]


Internet Draft                  iSCSI MIB                     April 2001


       Email: marjorie_krueger@hp.com

       Jim Muchow
       Postal: Cisco Systems, Inc
       6450 Wedgwood Road, Suite 130
       Maple Grove, MN
       USA 55311

       Tel: +1 763-398-1000
       Fax: +1 763-398-1001

       E-mail: jmuchow@cisco.com"







































Bakke, Muchow             Expires October 2001                [Page 120]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/