[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits] [IPR]
Versions: (draft-tantsura-isis-segment-routing-msd)
00 01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 RFC 8491
IS-IS Working Group J. Tantsura
Internet-Draft Nuage Networks
Intended status: Standards Track U. Chunduri
Expires: October 11, 2018 Huawei Technologies
S. Aldrin
Google, Inc
L. Ginsberg
Cisco Systems
April 09, 2018
Signaling MSD (Maximum SID Depth) using IS-IS
draft-ietf-isis-segment-routing-msd-10
Abstract
This document defines a way for an IS-IS Router to advertise multiple
types of supported Maximum SID Depths (MSDs) at node and/or link
granularity. Such advertisements allow entities (e.g., centralized
controllers) to determine whether a particular SID stack can be
supported in a given network. This document only defines one type of
MSD maximum label imposition, but defines an encoding that can
support other MSD types.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on October 11, 2018.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
Tantsura, et al. Expires October 11, 2018 [Page 1]
Internet-Draft April 2018
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Conventions used in this document . . . . . . . . . . . . 3
1.1.1. Terminology . . . . . . . . . . . . . . . . . . . . . 3
1.2. Requirements Language . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Node MSD Advertisement . . . . . . . . . . . . . . . . . . . 4
4. Link MSD Advertisement . . . . . . . . . . . . . . . . . . . 5
5. Using Node and Link MSD Advertisements . . . . . . . . . . . 5
6. Base MPLS Imposition MSD . . . . . . . . . . . . . . . . . . 6
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
8. Security Considerations . . . . . . . . . . . . . . . . . . . 7
9. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 7
10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 7
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.1. Normative References . . . . . . . . . . . . . . . . . . 8
11.2. Informative References . . . . . . . . . . . . . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 9
1. Introduction
When Segment Routing(SR) paths are computed by a centralized
controller, it is critical that the controller learns the Maximum SID
Depth(MSD) that can be imposed at each node/link a given SR path to
insure that the SID stack depth of a computed path doesn't exceed the
number of SIDs the node is capable of imposing.
PCEP SR extensions draft [I-D.ietf-pce-segment-routing] signals MSD
in SR PCE Capability TLV and METRIC Object. However, if PCEP is not
supported/configured on the head-end of a SR tunnel or a Binding-SID
anchor node and controller does not participate in IGP routing, it
has no way to learn the MSD of nodes and links which has been
configured. BGP-LS [RFC7752] defines a way to expose topology and
associated attributes and capabilities of the nodes in that topology
to a centralized controller. MSD signaling by BGP-LS has been
defined in [I-D.ietf-idr-bgp-ls-segment-routing-msd]. Typically,
BGP-LS is configured on a small number of nodes that do not
necessarily act as head-ends. In order for BGP-LS to signal MSD for
all the nodes and links in the network MSD is relevant, MSD
Tantsura, et al. Expires October 11, 2018 [Page 2]
Internet-Draft April 2018
capabilites should be advertised to every IS-IS router in the
network.
Other types of MSD are known to be useful. For example,
[I-D.ietf-isis-mpls-elc] defines Readable Label Depth Capability
(RLDC) that is used by a head-end to insert an Entropy Label (EL) at
a depth, that could be read by transit nodes.
This document defines an extension to IS-IS used to advertise one or
more types of MSD at node and/or link granularity. It also creates
an IANA registry for assigning MSD type identifiers. It also defines
the Base MPLS Imposition MSD type. In the future it is expected,
that new MSD types will be defined to signal additional capabilities
e.g., entropy labels, SIDs that can be imposed through recirculation,
or SIDs associated with another dataplane e.g., IPv6.
1.1. Conventions used in this document
1.1.1. Terminology
BGP-LS: Distribution of Link-State and TE Information using Border
Gateway Protocol
BMI: Base MPLS Imposition is the number of MPLS labels which can be
imposed inclusive of any service/transport labels
IS-IS: Intermediate System to Intermediate System
MSD: Maximum SID Depth - the number of SIDs a node or a link on a
node can support
PCC: Path Computation Client
PCE: Path Computation Element
PCEP: Path Computation Element Protocol
SID: Segment Identifier
SR: Segment Routing
1.2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP14 [RFC2119], [RFC8174] when, and only when they appear in all
capitals, as shown here .
Tantsura, et al. Expires October 11, 2018 [Page 3]
Internet-Draft April 2018
2. Terminology
This memo makes use of the terms defined in [RFC4970].
3. Node MSD Advertisement
The node MSD sub-TLV is defined within the body of the IS-IS Router
Capability TLV [RFC7981], to carry the provisioned SID depth of the
router originating the Router Capability TLV. Node MSD is the
minimum MSD supported by the node on any interface. MSD values may
be learned via a hardware API or may be provisioned.
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MSD-Type | MSD Value |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
// ................... //
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MSD-Type | MSD Value |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 1: Node MSD Sub-TLV
The Type: TBD1
Length: variable (minimum of 2, multiple of 2 octets) and represents
the total length of value field.
Value: field consists of one or more pairs of a 1 octet MSD-Type
(IANA Registry) and 1 octet Value.
Node MSD value is a number in the range of 0-255. 0 represents lack
of the ability to support SID stack of any depth; any other value
represents that of the node. This value MUST represent the lowest
value supported by any link associated with the node.
This sub-TLV is optional. The scope of the advertisement is specific
to the deployment.
Tantsura, et al. Expires October 11, 2018 [Page 4]
Internet-Draft April 2018
4. Link MSD Advertisement
The link MSD sub-TLV is defined for TLVs 22, 23, 141, 222, and 223 to
carry the MSD of the interface associated with the link. MSD values
may be learned via a hardware API or may be provisioned.
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MSD-Type | MSD Value |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
// ................... //
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MSD-Type | MSD Value |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 2: Link MSD Sub-TLV
The Type: TBD2
Length: variable (minimum of 2, multiple of 2 octets) and represents
the total length of value field.
Value: consists of one or more pairs of a 1 octet MSD-Type (IANA
Registry) and 1 octet Value.
Link MSD value is a number in the range of 0-255. 0 represents lack
of the ability to support SID stack of any depth; any other value
represents that of the link when used as an outgoing link.
This sub-TLV is optional. The scope of the advertisement is specific
to the deployment.
5. Using Node and Link MSD Advertisements
When Link MSD is present for a given MSD type, the value of the Link
MSD MUST take preference over the Node MSD.
The meaning of the absence of both Node and Link MSD advertisements
for a given MSD type is specific to the MSD type. Generally it can
only be inferred that the advertising node does not support
advertisement of that MSD type. However, in some cases the lack of
advertisement might imply that the functionality associated with the
Tantsura, et al. Expires October 11, 2018 [Page 5]
Internet-Draft April 2018
MSD type is not supported. The correct interpretation MUST be
specified when an MSD type is defined.
6. Base MPLS Imposition MSD
Base MPLS Imposition MSD (BMI-MSD) signals the total number of MPLS
labels a node is capable of imposing, including any service/transport
labels.
Absence of BMI-MSD advertisements indicates solely that the
advertising node does not support advertisement of this capability.
7. IANA Considerations
This document requests IANA to allocate a sub-TLV type (TBD1) for the
new sub TLV proposed in Section 3 of this document from IS-IS Router
Capability TLV Registry as defined by [RFC7981].
IANA has allocated the following value through the early assignment
process:
Value Description Reference
----- --------------- -------------
23 Node MSD This document
Figure 3: Node MSD
This document requests IANA to allocate a sub-TLV type (TBD2) as
defined in Section 4 from Sub-TLVs for TLVs 22, 23, 141, 222 and 223
registry.
IANA has allocated the following value through the early assignment
process:
Value Description Reference
----- --------------- -------------
15 Link MSD This document
Figure 4: Link MSD
Per TLV information where Link MSD sub-TLV can be part of:
Tantsura, et al. Expires October 11, 2018 [Page 6]
Internet-Draft April 2018
TLV 22 23 25 141 222 223
--- --------------------
y y y y y y
Figure 5: TLVs where LINK MSD Sub-TLV can be present
This document requests creation of an IANA managed registry under a
new category of "Interior Gateway Protocol (IGP) Parameters" IANA
registries to identify MSD types as proposed in Section 3 and
Section 4. The registration procedure is "Expert Review" as defined
in [RFC8126]. Suggested registry name is "MSD types". Types are an
unsigned 8 bit number. The following values are defined by this
document
Value Name Reference
----- --------------------- -------------
0 Reserved This document
1 Base MPLS Imposition MSD This document
2-250 Unassigned This document
251-254 Experimental This document
255 Reserved This document
Figure 6: MSD Types Codepoints Registry
8. Security Considerations
Security considerations, as specified by [RFC7981] are applicable to
this document
9. Contributors
The following people contributed to this document:
Peter Psenak
Email: ppsenak@cisco.com
10. Acknowledgements
The authors would like to thank Acee Lindem, Stephane Litkowski and
Bruno Decraene for their reviews and valuable comments.
11. References
Tantsura, et al. Expires October 11, 2018 [Page 7]
Internet-Draft April 2018
11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC4970] Lindem, A., Ed., Shen, N., Vasseur, JP., Aggarwal, R., and
S. Shaffer, "Extensions to OSPF for Advertising Optional
Router Capabilities", RFC 4970, DOI 10.17487/RFC4970, July
2007, <https://www.rfc-editor.org/info/rfc4970>.
[RFC7981] Ginsberg, L., Previdi, S., and M. Chen, "IS-IS Extensions
for Advertising Router Information", RFC 7981,
DOI 10.17487/RFC7981, October 2016,
<https://www.rfc-editor.org/info/rfc7981>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
11.2. Informative References
[I-D.ietf-idr-bgp-ls-segment-routing-msd]
Tantsura, J., Chunduri, U., Mirsky, G., and S. Sivabalan,
"Signaling Maximum SID Depth using Border Gateway Protocol
Link-State", draft-ietf-idr-bgp-ls-segment-routing-msd-01
(work in progress), October 2017.
[I-D.ietf-isis-mpls-elc]
Xu, X., Kini, S., Sivabalan, S., Filsfils, C., and S.
Litkowski, "Signaling Entropy Label Capability and
Readable Label-stack Depth Using IS-IS", draft-ietf-isis-
mpls-elc-03 (work in progress), January 2018.
[I-D.ietf-pce-segment-routing]
Sivabalan, S., Filsfils, C., Tantsura, J., Henderickx, W.,
and J. Hardwick, "PCEP Extensions for Segment Routing",
draft-ietf-pce-segment-routing-11 (work in progress),
November 2017.
[RFC7752] Gredler, H., Ed., Medved, J., Previdi, S., Farrel, A., and
S. Ray, "North-Bound Distribution of Link-State and
Traffic Engineering (TE) Information Using BGP", RFC 7752,
DOI 10.17487/RFC7752, March 2016,
<https://www.rfc-editor.org/info/rfc7752>.
Tantsura, et al. Expires October 11, 2018 [Page 8]
Internet-Draft April 2018
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/info/rfc8126>.
Authors' Addresses
Jeff Tantsura
Nuage Networks
Email: jefftant.ietf@gmail.com
Uma Chunduri
Huawei Technologies
Email: uma.chunduri@huawei.com
Sam Aldrin
Google, Inc
Email: aldrin.ietf@gmail.com
Les Ginsberg
Cisco Systems
Email: ginsberg@cisco.com
Tantsura, et al. Expires October 11, 2018 [Page 9]
Html markup produced by rfcmarkup 1.129c, available from
https://tools.ietf.org/tools/rfcmarkup/