[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]
Versions: (draft-jang-mip6-hiopt) 00 01 02 03
04 05 06 07 08 09 10 11 12 13 14 15
16 17 18 RFC 6610
MIP6 Working Group H. Jang
Internet-Draft A. Yegin
Intended status: Standards Track Samsung
Expires: October 19, 2008 K. Chowdhury
Starent Networks
J. Choi
Samsung
April 17, 2008
DHCP Options for Home Information Discovery in MIPv6
draft-ietf-mip6-hiopt-14.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on October 19, 2008.
Jang, et al. Expires October 19, 2008 [Page 1]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
Abstract
This draft defines a DHCP-based scheme to enable dynamic discovery of
Mobile IPv6 home network information. New DHCP options are defined
which allow a mobile node to request the home agent IP address, FQDN,
or home network prefix and obtain it via the DHCP response.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. DHCP options for HA Dynamic Discovery . . . . . . . . . . . . 5
3.1. Home Network Information Option . . . . . . . . . . . . . 5
3.2. MIP6 Relay Agent Option . . . . . . . . . . . . . . . . . 7
3.3. Common Sub-options . . . . . . . . . . . . . . . . . . . . 8
4. Option Usage . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1. Mobile Node Behavior . . . . . . . . . . . . . . . . . . . 11
4.2. NAS/DHCP Relay Agent Behavior . . . . . . . . . . . . . . 12
4.3. DHCP Server Behavior . . . . . . . . . . . . . . . . . . . 13
5. Security Considerations . . . . . . . . . . . . . . . . . . . 17
6. IANA Consideration . . . . . . . . . . . . . . . . . . . . . . 18
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 19
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.1. Normative References . . . . . . . . . . . . . . . . . . . 20
8.2. Informative References . . . . . . . . . . . . . . . . . . 21
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 22
Intellectual Property and Copyright Statements . . . . . . . . . . 23
Jang, et al. Expires October 19, 2008 [Page 2]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
1. Introduction
Before a mobile node can engage in Mobile IPv6 signaling with a home
agent, it should either know the IP address of the home agent via
pre-configuration, or dynamically discover it. The Mobile IPv6
specification [RFC3775] describes how home agents can be dynamically
discovered by mobile nodes that know the home network prefix. This
scheme does not work when prefix information is not already available
to the mobile node. One architecture to solve this problem is
described in [I-D.ietf-mip6-bootstrapping-integrated-dhc]. A part of
the solution is the capability to deliver home network prefix
information to the mobile node by means of the stateless DHCPv6
[RFC3736] [RFC3315]. Subsequently, the mobile node can engage in
dynamic home agent discovery using the prefix information. In
addition to delivering the prefix information, DHCP can also be used
to provide the IP addresses or FQDNs of the home agents that are
available to the mobile node. The solution involves defining a new
DHCP option to carry home network prefix, home agent IP address and
FQDN information.
As part of configuring the initial TCP/IP parameters, a mobile node
can find itself a suitable home agent. Such a home agent might
reside in the access network that the mobile node connects to, or in
a home network that the mobile node is associated with. A mobile
node can indicate its home network identity when roaming to a visited
network in order to obtain the MIP6 bootstrap parameters from the
home network. As an example, the visited network may determine the
home network of the mobile node based on the realm portion of the NAI
(Network Access Identifier) [RFC4282] used in access authentication.
The mobile node may or may not be connected to the "home" network
when it attempts to learn Mobile IPv6 home network information. This
allows operators to centrally deploy home agents while being able to
bootstrap mobile nodes that are already roaming. This scenario also
occurs when HMIPv6 [I-D.ietf-mipshop-4140bis] is used, where the
mobile node is required to discover the MAP (a special home agent)
that is located multiple hops away from the mobile node's attachment
point.
Jang, et al. Expires October 19, 2008 [Page 3]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
General mobility terminology can be found in [RFC3753]. The
following additional terms, as defined in [RFC4640], are used in this
document:
o Access Service Provider (ASP): A network operator that
provides direct IP packet forwarding to and from the
mobile node.
o Mobility Service Provider (MSP): A service provider
that provides Mobile IPv6 service. In order to obtain
such service, the mobile node must be authenticated and
authorized to use the Mobile IPv6 service.
o Mobility Service Authorizer (MSA): A service provider
that authorizes Mobile IPv6 service.
Jang, et al. Expires October 19, 2008 [Page 4]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
3. DHCP options for HA Dynamic Discovery
This section introduces new DHCP options and their sub-options which
are used for dynamic discovery of the home agent's IPv6 address, IPv6
home network prefix, or FQDN information in Mobile IPv6. These
options also carry an IPv4 address of the IPv6 home agent so that a
mobile node can have access to Mobile IPv6 service over IPv4 network
as well. The detailed procedures are described in Section 2.3.2 of
DSMIPv6 (Mobile IPv6 support for dual stack Hosts and
Routers)[I-D.ietf-mip6-nemo-v4traversal].
The drafts [I-D.ietf-dime-mip6-integrated], [I-D.ietf-mip6-radius]
and [I-D.ietf-mip6-bootstrapping-integrated-dhc] describe the
complete procedure for home agent assignment among the mobile node,
NAS (Network Access Server), DHCP and AAA entities for the
bootstrapping procedure in the integrated scenario.
A NAS is assumed to be co-located with a DHCP relay agent or a DHCP
server in this solution. In a network where the NAS is not co-
located with a DHCP relay nor a server, the server may not be
provided with the home network information from the NAS, and thereby
it may assign to a mobile node the home information which has been
preconfigured by the administrator or which is acquired through a
mechanism that is not described in this document.
3.1. Home Network Information Option
This option is proposed to allow the exchange of home network
information between the mobile node (DHCP client) and the DHCP
server. It is used to indicate the target home network requested by
the mobile node to the DHCP server in the Information-request
message. In the Reply message, it conveys the home network
information assigned by the DHCP server to the mobile node.
Jang, et al. Expires October 19, 2008 [Page 5]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_MIP6_HNINF | Option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Id-type | |
+-+-+-+-+-+-+-+-+ +
. Sub-options .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Option-code
OPTION_MIP6_HNINF (TBD)
Option-len
1 + length of Sub-options in units of octets.
Id-type
The type of Home Network Information.
0 Visited domain (local ASP)
1 Target MSP
2 No preference by the mobile node
Sub-options
A series of sub-options as specified in Section 3.3.
The Id-type in the request specifies the location of the home network
requested by the mobile node as below:
Jang, et al. Expires October 19, 2008 [Page 6]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
o The Id-type 0 indicates the mobile node is interested in
learning the home network information that pertains to the
currently visited network. This type can be used to
discover local home agents in the local ASP. In this case,
the Option-len is set to 1.
o The Id-type 1 indicates the mobile node is interested in
learning the home network information that pertains to the
given realm. This type can be used to discover home agents
that are hosted by a user's home domain or by any target
domain. The option MUST carry a sub-option (defined in
Section 3.3) whose Sub-opt-code is 1, which specifies the
requested target MSP. The target MSP can be a mobile
node's home MSP or any MSP which has a trusted roaming
relationship with the mobile node's MSA.
o If the mobile node has no preference, the Id-type is set
to 2 and the Option-len field is set to 1. In this case,
the assignment of the home network information is within
the server's own discretion. For a detailed description,
refer to Section 4.
The Id-type in the reply indicates the location of the home network
information provided by the DHCP server which is carried in the
following sub-options.
Multiple sub-options may exist in a Home Network Information option
to carry more than one piece of home information.
3.2. MIP6 Relay Agent Option
This option carries the home network information for the mobile node
(the NAS may know this, for instance, through AAA by using
[I-D.ietf-mip6-radius] or [I-D.ietf-dime-mip6-integrated]) from the
DHCP relay agent to the DHCP server. The DHCP relay agent sends this
option to the DHCP server in the Relay-forward message.
Jang, et al. Expires October 19, 2008 [Page 7]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_MIP6_RELAY | Option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. Sub-options .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Option-code
OPTION_MIP6_RELAY (TBD)
Option-len
The length of Sub-options in units of octets.
Sub-options
A series of sub-options as specified in Section 3.3.
Multiple sub-options may exist in a MIP6 Relay Agent option to carry
more than one piece of home information.
3.3. Common Sub-options
This sub-option is a container for a home network parameter in the
Home Network Information option or in the MIP6 Relay Agent option.
Jang, et al. Expires October 19, 2008 [Page 8]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sub-opt-code | Sub-opt-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. Home Network Parameter .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Sub-opt-code
A 16-bit unsigned integer for the type of the following
Home Network Parameter field. Possible values are:
0 Reserved
1 Home network identifier (only admitted
in a Home Network Information option)
2 IPv6 home network prefix
3 IPv6 home agent address
4 IPv4 address of the IPv6 home agent
5 Home agent FQDN
6 .. (2^16-1) Reserved
Sub-opt-len
The length of the Home Network Parameter field in units
of octets.
Home Network Parameter
The provided home network information according to the
Sub-opt-code. This is encoded as specified below.
While the Sub-opt-code 1 is only available in both the requesting and
the returned Home Network Information options, Sub-opt-codes 2, 3, 4,
and 5 are available only in the returned Home Network Information
option and the MIP6 Relay Agent option.
When the Sub-opt-code is set to 1 in the request, the Home Network
Parameter field MUST contain an identifier to specify the home
network requested by the mobile node. This field MUST be set in the
Jang, et al. Expires October 19, 2008 [Page 9]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
form of a FQDN [RFC1035], encoded as specified in Section 8 of
[RFC3315]. This sub-option in the request SHOULD be copied into the
Home Network Information option returned in the reply.
When the Sub-opt-code is set to 2, the Home Network Parameter field
MUST include the 8-bit Prefix-Len field followed by the 128-bit IPv6
Home Network Prefix field. The Prefix-Len information indicates the
number of leading bits in the IPv6 Home Network Prefix that are
valid. Note that the provided prefix information MUST be used for
the dynamic home agent discovery only.
When the Sub-opt-code is set to 3, the Home Network Parameter field
MUST contain the 128-bit IPv6 address of the home agent.
When the Sub-opt-code is set to 4, the Home Network Parameter field
MUST contain the 32-bit IPv4 address of the IPv6 home agent.
When the Sub-opt-code is set to 5, it MUST contain the FQDN of the
home agent as described in Section 8 of [RFC3315].
Jang, et al. Expires October 19, 2008 [Page 10]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
4. Option Usage
The requesting and sending of the proposed DHCP options follow the
rules for DHCPv6 options in [RFC3315].
4.1. Mobile Node Behavior
A mobile node does not need to perform the home information discovery
procedure after every change in attachment. It may try to perform
the home network information discovery when it lacks home network
information for MIPv6 or needs to change the home agent for some
reasons, for example, to recover from the single point of failure of
the existing home agent or to use the local home agent located in the
network where the mobile node is currently attached. Note that
despite the home information discovery procedure the mobile node may
decide to keep the old home agent still in use afterwards, in order
to avoid losing the current sessions.
For acquiring the home network information, a mobile node MUST send
an Information-request message including the Home Network Information
option according to the stateless DHCPv6 procedures
[RFC3736][RFC3315]. The mobile node MUST also include the Option
code for the Home Network Information option in the Option Request
option in the request.
During the process of requesting the bootstrapping information, the
mobile node MUST clarify its preference about the requested home
network with the Id-type in the Home Network Information option. If
it does not care about the location of the home network where the
home agent is to be assigned, it MUST clarify that fact by setting
the Id-type to 2. Id-type 2 means that the mobile node has no
preferred home network and is willing to use any information provided
by the DHCP server. Once it decides where the home agent is to be
assigned, the specific information to be assigned depends mainly on
the server's policy or the server's knowledge.
When the mobile node sets the Id-type to 1 in the request, it MUST
include a sub-option with Sub-opt-code 1 which carries the FQDN of
the target network such as "example.com". Note that a single Home
Network Information option can carry at most one sub-option with Sub-
opt-code 1.
The mobile node MUST NOT include a Home Network Information option
whose Id-type is other than 0, 1, and 2 as defined as Section 3.1.
A value of 1 is the only Sub-opt-code available in the request.
The mobile node can request more than one instance of home
Jang, et al. Expires October 19, 2008 [Page 11]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
information by using multiple Home Network Information options in the
request. For instance, if the mobile node wants to retrieve home
network information from both the visited network (ASP) and the
target MSP with a single transaction, it can request the information
by using two Home Network Information options with Id-type 0 and Id-
type 1. It can also request the home information for more than one
target MSPs at the same time by including multiple Home Network
Information options with Id-type 1. However, there MUST NOT be more
than one Home Network Information option with Id-type 0 nor more than
one Home Network Information option with Id-type 2 in the request.
On receiving the Reply message including a Home Network Information
option, the mobile node SHOULD check whether the option is valid. It
MUST ignore any option whose Id-type is other than 0, 1, and 2. It
MUST also ignore any sub-option in the reply whose Sub-opt-code is
other than 1, 2, 3, 4, and 5 as described in Section 3.3.
When the mobile node obtains a Home Network Information option with
Id-type 1, it SHOULD check whether the returned option includes the
home network identifier in its sub-options. If it is not provided in
the sub-options, the Home Network Information option MUST be ignored
and skipped. The home network identifiers provide a way to match the
Home Network Information options in the request and the reply when
the mobile node has sent the request with multiple Home Network
Information options with the same Id-type 1 but with different home
network identifiers.
As described later in Section 4.3, servers attempt to place multiple
options and in the order of preference. When provided with multiple
Home Network Information options having different id-types or with
multiple sub-options for the same id-type, the mobile node SHOULD
choose the first one that it can employ.
If the mobile node attempts to retrieve information in its current
network but fails, it SHOULD employ previously retrieved information.
If no information has been retrieved previously and there is no
configuration that enables the mobile node to find and use a home
agent, the mobile node SHOULD log an error and, depending on
configured policy, revert to network access without a mobility
protocol.
4.2. NAS/DHCP Relay Agent Behavior
As described in Section 3, a NAS is assumed to be co-located with a
DHCP relay or a DHCP server. The NAS communicates with the mobile
node during the network access authentication and typically also
interacts with backend AAA systems. It is expected that the NAS is
or becomes aware of the mobility related information for the mobile
Jang, et al. Expires October 19, 2008 [Page 12]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
node at this time using mechanisms such as Diameter attributes
[I-D.ietf-dime-mip6-integrated] or RADIUS attributes
[I-D.ietf-mip6-radius]. The NAS passes the information to the co-
located DHCP relay agent or the server. The following describes the
behavior of the DHCP relay agent when the NAS functions as a DHCP
relay.
When receiving a DHCP message from the mobile node, the DHCP relay
agent forwards the message to the All_DHCP_Servers multicast address,
or other addresses configured by the network administrator as per
[RFC3315]. If the relay determines that the NAS has passed home
network information for this mobile node and has available home
information for it, it SHOULD include the home network information in
a MIP6 Relay Agent option, and attach this option in the Relay-
forward message. The relay SHOULD include each home network
parameter in a sub-option, and include all sub-options in a single
MIP6 Relay Agent option. It MUST NOT include any sub-option whose
Sub-opt-code is other than 2, 3, 4, and 5 as described in Section
3.3.
In case the DHCP relay does not maintain any home network information
for the requesting mobile node, it simply forwards the received
message to the DHCP server according to the [RFC3315].
Upon receiving a Relay-reply message from the DHCPv6 server, the
relay SHALL follow the guidelines defined in [RFC3315]. It extracts
a Reply message from the Relay Message option in the Relay-reply
message and relays it to the mobile node.
4.3. DHCP Server Behavior
When the server receives a Relay-forward message, it may include the
MIP6 Relay Agent option in case there was home information available
for the mobile node at the relay. The home network information
received from the relay SHOULD be kept in the server so that the
server can provide the information when it is requested by the mobile
node. The server may carry this in the reply when the mobile node
requested the home network information with an Id-type of 1.
The server MUST ignore any sub-option in a MIP6 Relay Agent option
whose Sub-opt-code is other than 2, 3, 4, and 5, as described in
Section 3.3.
When a DHCP server receives an Information-request message either
directly or encapsulated in a Relay-forward message, it SHOULD check
whether the Information-request includes the Home Network Information
option. If the mobile node included a Home Network Information
option and a Home Network Information option is requested by the
Jang, et al. Expires October 19, 2008 [Page 13]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
Option Request option in the Information-request, the server MUST
include a Home Network Information option in the Reply message.
The server MUST ignore any Home Network Information option in the
request whose Id-type is other than 0, 1, and 2 as described in
Section 3.1. It MUST also ignore any sub-option in the request whose
Sub-opt-code is not 1.
It MUST construct the Home Network Information option(s) according to
the following logic, and include it or them in the Reply. In case
the Information-request message includes:
o A. Home Network Information option with Id-type 0
The DHCP server MUST include each configured local home
network parameter in a sub-option, and include all
sub-options in a single Home Network Information option.
It MUST set the Id-type to 0 in the Home Network Information
option to be returned.
o B. Home Network Information option with Id-type 1
Any Home Network Information option which carries more than
one target MSP or which does not carry any target MSP MUST be
ignored. If the DHCP server has home network information for
the target MSP, it MUST include each home network parameter in
a sub-option, and include all these sub-options in a single
Home Network Information option. It MUST set the Id-type to 1
in the Home Network Information option to be returned, and
copy the sub-option of the request which includes the target
MSP into the Home Network Information option to be returned.
o C. Home Network Information option with Id-type 2
In this case, the assignment of home information relies
on the server's local policy, and the DHCP server is required
to have its own policy so that it can reply with the proper
information in the Home Network Information option. The policy
can be determined based on several factors such as home agent
availability and the authorization information of the mobile
node. However, the specific policy setting is not in the scope
of this document. For each instance of home network information
selected, the DHCP server MUST include each home network
parameter in a sub-option, and include all these sub-options
in a Home Network Information option with Id-type 0 or 1 in
the reply.
The server MUST NOT include a Home Network Information option in the
Jang, et al. Expires October 19, 2008 [Page 14]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
reply whose Id-type is other than 0, 1, and 2. It also MUST NOT
include a sub-option in the reply whose Sub-opt-code is other than 1,
2, 3, 4, and 5 as described in Section 3.3.
The Reply message can carry multiple Home Network Information
options. The provided multiple options SHOULD be listed in order of
preference. Multiple sub-options also SHOULD be listed in order of
preference within a single Home Network Information option.
Note that there MUST NOT be more than one Home Network Information
option with Id-type 0 nor more than one Home Network Information
option with Id-type 2 in the reply. The value of Id-type 2 is valid
in the reply only when the server received the option with Id-type 2
but has no data to be returned to the mobile node.
In case the server cannot find any home information, it must proceed
as follows:
o For Id-type 0 or 2, it MUST return a Home Network
Information option with the Id-type set to the requested
Id-type and the Option-len set to 1.
o In case of Id-type 1 in the request, it MUST return a Home
Network Information option by setting the Id-type to 1,
include the Home Network Information sub-option with the
target MSP, and set the Option-len to 1 + the length of
this sub-option.
There is no requirement that the server return this option and its
data in a Relay message as another Relay Agent option
[RFC4580][RFC4649].
The DHCP server should provide all of the matching home information
in Home Network Information option(s) based on its policy. It may
return partially matched results. For example, on receipt of a Home
Network Information option which specifies "xxx.example.com" as the
target network, it may return "example.com" to the mobile node. In
this case, "xxx.example.com" is returned in a sub-option with Sub-
opt-code 1, and "example.com" in a sub-option with Sub-opt-code 5.
Note that the detailed rule for returning partially matched instances
of home network information follows the server's own policy and is
outside the scope of this document.
There can be several ways that the DHCP server knows the requested
home network information. For instance, as described in
[I-D.ietf-mip6-radius] and [I-D.ietf-dime-mip6-integrated], a NAS can
learn the information via RADIUS during network access
authentication, and the DHCP relay co-located with the NAS can
Jang, et al. Expires October 19, 2008 [Page 15]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
transfer it to the DHCP server by using the DHCP option specified in
Section 3.2 and Section 3.3, or the home information may have been
configured statically in the DHCP server by the administrator.
However, the mechanism by which the DHCP server is provisioned with
the home network information or obtains it dynamically is outside the
scope of this document.
Jang, et al. Expires October 19, 2008 [Page 16]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
5. Security Considerations
Secure delivery of home agent and home network information from a
DHCP server to the mobile node (DHCP client) relies on the same
security as DHCP. The particular option defined in this draft does
not have additional impact on DHCP security.
Aside from the DHCP client to server interaction, an operator must
also ensure secure delivery of mobile IP information to the DHCP
server. This is outside the scope of DHCP and the newly defined
option.
The mechanisms in this specification could be used by attackers to
learn the addresses of home agents in the home network, or to feed
incorrect information to mobile nodes.
The ability to learn addresses of nodes may be useful to attackers
because brute-force scanning of the address space is not practical
with IPv6. Thus, they could benefit from any means which make
mapping the networks easier. For example, if a security threat
targeted at routers or even home agents is discovered, having a
simple mechanism to easily find out possible targets may prove to be
an additional security risk.
Apart from discovering the address(es) of home agents, attackers will
not be able to learn much from this information, and mobile nodes
cannot be tricked into using wrong home agents, as the actual
communication with the home agents employs mutual authentication.
The mechanisms from this specification may also leak interesting
information about network topology and prefixes to attackers, and
where there is no security to protect DHCP, even modify this
information. Again, the mobile nodes and home agents employ end-to-
end security when they communicate with each other. The authentic
source of all information is that communication, not the information
from DHCP.
However, attacks against the information carried in DHCP may lead to
denial-of-service if mobile nodes are unable to connect to any home
agent, or choose a home agent that is not the most preferred one.
Jang, et al. Expires October 19, 2008 [Page 17]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
6. IANA Consideration
This document defines new DHCPv6 options, and IANA is requested to
assign the following new DHCPv6 Option Codes/Sub-option Codes in the
registry maintained in
http://www.iana.org/assignments/dhcpv6-parameters:
o OPTION_MIP6_HNINF for the Home Network Information option
o OPTION_MIP6_RELAY for the MIP6 Relay Agent option
The Sub-option Codes for the Home Network Information option and the
MIP6 Relay Agent option share a common namespace:
o Reserved 0
o Home network identifier 1
(only allowed in the Home Network
Information option; value Reserved
for the MIP6 Relay Agent option)
o IPv6 Home network prefix 2
o IPv6 Home agent address 3
o IPv4 address of the IPv6 home agent 4
o Home agent FQDN 5
o Reserved 6 .. (2^16-1)
These Sub-option Codes should be placed in a new name space "DHCPv6
Mobile IPv6 Sub-option Codes" under the same registry. In addition,
a new name space "Home Network Information Option Id-type Values"
should be created, again in the same registry. Values 0, 1, and 2
are assigned by this document as specified in Section 3.1.
New values for this name space can be allocated using Standards
Action according to [RFC2434].
Jang, et al. Expires October 19, 2008 [Page 18]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
7. Acknowledgments
The authors would like to thank Kilian Weniger, Domagoj Premec,
Basavaraj Patil, Vijay Devarapalli, Gerardo Giaretta, Bernie Volz,
David W. Hankins, Behcet Sarikaya, Vidya Narayanan, Francis Dupont,
Sam Weiler, Jari Arkko, Alfred Hoenes, Suresh Krishnan, and Miguel A.
Diaz for their valuable feedback.
Jang, et al. Expires October 19, 2008 [Page 19]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
8. References
8.1. Normative References
[I-D.ietf-mip6-bootstrapping-integrated-dhc]
Chowdhury, K. and A. Yegin, "MIP6-bootstrapping for the
Integrated Scenario",
draft-ietf-mip6-bootstrapping-integrated-dhc-05 (work in
progress), July 2007.
[I-D.ietf-mip6-nemo-v4traversal]
Soliman, H., "Mobile IPv6 support for dual stack Hosts and
Routers (DSMIPv6)", draft-ietf-mip6-nemo-v4traversal-06
(work in progress), November 2007.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, November 1987.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2434] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 2434,
October 1998.
[RFC3315] Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C.,
and M. Carney, "Dynamic Host Configuration Protocol for
IPv6 (DHCPv6)", RFC 3315, July 2003.
[RFC3736] Droms, R., "Stateless Dynamic Host Configuration Protocol
(DHCP) Service for IPv6", RFC 3736, April 2004.
[RFC3775] Johnson, D., Perkins, C., and J. Arkko, "Mobility Support
in IPv6", RFC 3775, June 2004.
[RFC4282] Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The
Network Access Identifier", RFC 4282, December 2005.
[RFC4580] Volz, B., "Dynamic Host Configuration Protocol for IPv6
(DHCPv6) Relay Agent Subscriber-ID Option", RFC 4580,
June 2006.
[RFC4649] Volz, B., "Dynamic Host Configuration Protocol for IPv6
(DHCPv6) Relay Agent Remote-ID Option", RFC 4649,
August 2006.
Jang, et al. Expires October 19, 2008 [Page 20]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
8.2. Informative References
[I-D.ietf-dime-mip6-integrated]
Korhonen, J., Bournelle, J., Tschofenig, H., Perkins, C.,
and K. Chowdhury, "Diameter Mobile IPv6: Support for
Network Access Server to Diameter Server Interaction",
draft-ietf-dime-mip6-integrated-08 (work in progress),
February 2008.
[I-D.ietf-mip6-radius]
Chowdhury, K., "RADIUS Mobile IPv6 Support",
draft-ietf-mip6-radius-04 (work in progress),
February 2008.
[I-D.ietf-mipshop-4140bis]
Castelluccia, C., "Hierarchical Mobile IPv6 Mobility
Management (HMIPv6)", draft-ietf-mipshop-4140bis-02 (work
in progress), April 2008.
[RFC3753] Manner, J. and M. Kojo, "Mobility Related Terminology",
RFC 3753, June 2004.
[RFC4640] Patel, A. and G. Giaretta, "Problem Statement for
bootstrapping Mobile IPv6 (MIPv6)", RFC 4640,
September 2006.
Jang, et al. Expires October 19, 2008 [Page 21]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
Authors' Addresses
Heejin Jang
Samsung Advanced Institute of Technology
P.O. Box 111
Suwon 440-600
Korea
Email: heejin.jang@samsung.com
Alper E. Yegin
Samsung Electronics
Istanbul
Turkey
Email: a.yegin@partner.samsung.com
Kuntal Chowdhury
Starent Networks
30 International Place
Tewksbury, MA 01876
US
Email: kchowdhury@starentnetworks.com
JinHyeock Choi
Samsung Advanced Institute of Technology
P.O. Box 111
Suwon 440-600
Korea
Email: jinchoe@samsung.com
Jang, et al. Expires October 19, 2008 [Page 22]
Internet-Draft DHCPv6 for Home Info Discovery in MIPv6 April 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Jang, et al. Expires October 19, 2008 [Page 23]
Html markup produced by rfcmarkup 1.129b, available from
https://tools.ietf.org/tools/rfcmarkup/