[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits] [IPR]

Versions: (draft-barnes-mls-protocol) 00 01 02 03 04 05 06 07 08 09

Network Working Group                                          R. Barnes
Internet-Draft                                                     Cisco
Intended status: Informational                             B. Beurdouche
Expires: September 7, 2020                                         Inria
                                                             J. Millican
                                                                Facebook
                                                                E. Omara
                                                                  Google
                                                          K. Cohn-Gordon
                                                    University of Oxford
                                                               R. Robert
                                                                    Wire
                                                          March 06, 2020


              The Messaging Layer Security (MLS) Protocol
                       draft-ietf-mls-protocol-09

Abstract

   Messaging applications are increasingly making use of end-to-end
   security mechanisms to ensure that messages are only accessible to
   the communicating endpoints, and not to any servers involved in
   delivering messages.  Establishing keys to provide such protections
   is challenging for group chat settings, in which more than two
   clients need to agree on a key but may not be online at the same
   time.  In this document, we specify a key establishment protocol that
   provides efficient asynchronous group key establishment with forward
   secrecy and post-compromise security for groups in size ranging from
   two to thousands.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 7, 2020.




Barnes, et al.          Expires September 7, 2020               [Page 1]


Internet-Draft                     MLS                        March 2020


Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Change Log  . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   7
   3.  Basic Assumptions . . . . . . . . . . . . . . . . . . . . . .   8
   4.  Protocol Overview . . . . . . . . . . . . . . . . . . . . . .   8
   5.  Ratchet Trees . . . . . . . . . . . . . . . . . . . . . . . .  12
     5.1.  Tree Computation Terminology  . . . . . . . . . . . . . .  13
     5.2.  Ratchet Tree Nodes  . . . . . . . . . . . . . . . . . . .  15
     5.3.  Views of a Ratchet Tree . . . . . . . . . . . . . . . . .  16
     5.4.  Ratchet Tree Evolution  . . . . . . . . . . . . . . . . .  17
     5.5.  Synchronizing Views of the Tree . . . . . . . . . . . . .  18
   6.  Cryptographic Objects . . . . . . . . . . . . . . . . . . . .  20
     6.1.  Ciphersuites  . . . . . . . . . . . . . . . . . . . . . .  20
       6.1.1.  X25519 and X448 . . . . . . . . . . . . . . . . . . .  21
     6.2.  Credentials . . . . . . . . . . . . . . . . . . . . . . .  22
   7.  Key Packages  . . . . . . . . . . . . . . . . . . . . . . . .  23
     7.1.  Supported Versions and Supported Ciphersuites . . . . . .  25
     7.2.  Expiration  . . . . . . . . . . . . . . . . . . . . . . .  26
     7.3.  KeyPackage Identifiers  . . . . . . . . . . . . . . . . .  26
     7.4.  Parent Hash . . . . . . . . . . . . . . . . . . . . . . .  26
     7.5.  Tree Hashes . . . . . . . . . . . . . . . . . . . . . . .  27
     7.6.  Group State . . . . . . . . . . . . . . . . . . . . . . .  29
     7.7.  Direct Paths  . . . . . . . . . . . . . . . . . . . . . .  30
     7.8.  Key Schedule  . . . . . . . . . . . . . . . . . . . . . .  31
     7.9.  Pre-Shared Keys . . . . . . . . . . . . . . . . . . . . .  33
     7.10. Encryption Keys . . . . . . . . . . . . . . . . . . . . .  34
     7.11. Exporters . . . . . . . . . . . . . . . . . . . . . . . .  35
   8.  Message Framing . . . . . . . . . . . . . . . . . . . . . . .  36
     8.1.  Metadata Encryption . . . . . . . . . . . . . . . . . . .  38
     8.2.  Content Signing and Encryption  . . . . . . . . . . . . .  39
   9.  Group Creation  . . . . . . . . . . . . . . . . . . . . . . .  41



Barnes, et al.          Expires September 7, 2020               [Page 2]


Internet-Draft                     MLS                        March 2020


   10. Group Evolution . . . . . . . . . . . . . . . . . . . . . . .  43
     10.1.  Proposals  . . . . . . . . . . . . . . . . . . . . . . .  43
       10.1.1.  Add  . . . . . . . . . . . . . . . . . . . . . . . .  44
       10.1.2.  Update . . . . . . . . . . . . . . . . . . . . . . .  44
       10.1.3.  Remove . . . . . . . . . . . . . . . . . . . . . . .  45
       10.1.4.  External Proposals . . . . . . . . . . . . . . . . .  45
     10.2.  Commit . . . . . . . . . . . . . . . . . . . . . . . . .  46
       10.2.1.  Welcoming New Members  . . . . . . . . . . . . . . .  50
   11. Extensibility . . . . . . . . . . . . . . . . . . . . . . . .  53
   12. Sequencing of State Changes . . . . . . . . . . . . . . . . .  54
     12.1.  Server-Enforced Ordering . . . . . . . . . . . . . . . .  55
     12.2.  Client-Enforced Ordering . . . . . . . . . . . . . . . .  56
   13. Application Messages  . . . . . . . . . . . . . . . . . . . .  56
     13.1.  Tree of Application Secrets  . . . . . . . . . . . . . .  56
     13.2.  Deletion Schedule  . . . . . . . . . . . . . . . . . . .  57
     13.3.  Further Restrictions . . . . . . . . . . . . . . . . . .  59
     13.4.  Message Encryption and Decryption  . . . . . . . . . . .  59
     13.5.  Delayed and Reordered Application messages . . . . . . .  60
   14. Security Considerations . . . . . . . . . . . . . . . . . . .  60
     14.1.  Confidentiality of the Group Secrets . . . . . . . . . .  61
     14.2.  Authentication . . . . . . . . . . . . . . . . . . . . .  61
     14.3.  Forward and post-compromise security . . . . . . . . . .  61
     14.4.  InitKey Reuse  . . . . . . . . . . . . . . . . . . . . .  62
   15. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  62
     15.1.  MLS Ciphersuites . . . . . . . . . . . . . . . . . . . .  62
     15.2.  MLS Designated Expert Pool . . . . . . . . . . . . . . .  65
   16. Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  66
   17. References  . . . . . . . . . . . . . . . . . . . . . . . . .  67
     17.1.  Normative References . . . . . . . . . . . . . . . . . .  67
     17.2.  Informative References . . . . . . . . . . . . . . . . .  68
     17.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .  69
   Appendix A.  Tree Math  . . . . . . . . . . . . . . . . . . . . .  69
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  72

1.  Introduction

   DISCLAIMER: This is a work-in-progress draft of MLS and has not yet
   seen significant security analysis.  It should not be used as a basis
   for building production systems.

   RFC EDITOR: PLEASE REMOVE THE FOLLOWING PARAGRAPH The source for this
   draft is maintained in GitHub.  Suggested changes should be submitted
   as pull requests at https://github.com/mlswg/mls-protocol.
   Instructions are on that page as well.  Editorial changes can be
   managed in GitHub, but any substantive change should be discussed on
   the MLS mailing list.





Barnes, et al.          Expires September 7, 2020               [Page 3]


Internet-Draft                     MLS                        March 2020


   A group of users who want to send each other encrypted messages needs
   a way to derive shared symmetric encryption keys.  For two parties,
   this problem has been studied thoroughly, with the Double Ratchet
   emerging as a common solution [doubleratchet] [signal].  Channels
   implementing the Double Ratchet enjoy fine-grained forward secrecy as
   well as post-compromise security, but are nonetheless efficient
   enough for heavy use over low-bandwidth networks.

   For a group of size greater than two, a common strategy is to
   unilaterally broadcast symmetric "sender" keys over existing shared
   symmetric channels, and then for each member to send messages to the
   group encrypted with their own sender key.  Unfortunately, while this
   improves efficiency over pairwise broadcast of individual messages
   and provides forward secrecy (with the addition of a hash ratchet),
   it is difficult to achieve post-compromise security with sender keys.
   An adversary who learns a sender key can often indefinitely and
   passively eavesdrop on that member's messages.  Generating and
   distributing a new sender key provides a form of post-compromise
   security with regard to that sender.  However, it requires
   computation and communications resources that scale linearly with the
   size of the group.

   In this document, we describe a protocol based on tree structures
   that enable asynchronous group keying with forward secrecy and post-
   compromise security.  Based on earlier work on "asynchronous
   ratcheting trees" [art], the protocol presented here uses an
   asynchronous key-encapsulation mechanism for tree structures.  This
   mechanism allows the members of the group to derive and update shared
   keys with costs that scale as the log of the group size.

1.1.  Change Log

   RFC EDITOR PLEASE DELETE THIS SECTION.

   draft-09

   o  Remove blanking of nodes on Add (*)

   o  Change epoch numbers to uint64 (*)

   o  Add PSK inputs (*)

   o  Add key schedule exporter (*)

   o  Sign the updated direct path on Commit, using "parent hashes" and
      one signature per leaf (*)

   o  Use structured types for external senders (*)



Barnes, et al.          Expires September 7, 2020               [Page 4]


Internet-Draft                     MLS                        March 2020


   o  Redesign Welcome to include confirmation and use derived keys (*)

   o  Remove ignored proposals (*)

   o  Always include an Update with a Commit (*)

   o  Add per-message entropy to guard against nonce reuse (*)

   o  Use the same hash ratchet construct for both application and
      handshake keys (*)

   o  Add more ciphersuites

   o  Use HKDF to derive key pairs (*)

   o  Mandate expiration of ClientInitKeys (*)

   o  Add extensions to GroupContext and flesh out the extensibility
      story (*)

   o  Rename ClientInitKey to KeyPackage

   draft-08

   o  Change ClientInitKeys so that they only refer to one ciphersuite
      (*)

   o  Decompose group operations into Proposals and Commits (*)

   o  Enable Add and Remove proposals from outside the group (*)

   o  Replace Init messages with multi-recipient Welcome message (*)

   o  Add extensions to ClientInitKeys for expiration and downgrade
      resistance (*)

   o  Allow multiple Proposals and a single Commit in one MLSPlaintext
      (*)

   draft-07

   o  Initial version of the Tree based Application Key Schedule (*)

   o  Initial definition of the Init message for group creation (*)

   o  Fix issue with the transcript used for newcomers (*)

   o  Clarifications on message framing and HPKE contexts (*)



Barnes, et al.          Expires September 7, 2020               [Page 5]


Internet-Draft                     MLS                        March 2020


   draft-06

   o  Reorder blanking and update in the Remove operation (*)

   o  Rename the GroupState structure to GroupContext (*)

   o  Rename UserInitKey to ClientInitKey

   o  Resolve the circular dependency that draft-05 introduced in the
      confirmation MAC calculation (*)

   o  Cover the entire MLSPlaintext in the transcript hash (*)

   draft-05

   o  Common framing for handshake and application messages (*)

   o  Handshake message encryption (*)

   o  Convert from literal state to a commitment via the "tree hash" (*)

   o  Add credentials to the tree and remove the "roster" concept (*)

   o  Remove the secret field from tree node values

   draft-04

   o  Updating the language to be similar to the Architecture document

   o  ECIES is now renamed in favor of HPKE (*)

   o  Using a KDF instead of a Hash in TreeKEM (*)

   draft-03

   o  Added ciphersuites and signature schemes (*)

   o  Re-ordered fields in UserInitKey to make parsing easier (*)

   o  Fixed inconsistencies between Welcome and GroupState (*)

   o  Added encryption of the Welcome message (*)

   draft-02

   o  Removed ART (*)

   o  Allowed partial trees to avoid double-joins (*)



Barnes, et al.          Expires September 7, 2020               [Page 6]


Internet-Draft                     MLS                        March 2020


   o  Added explicit key confirmation (*)

   draft-01

   o  Initial description of the Message Protection mechanism. (*)

   o  Initial specification proposal for the Application Key Schedule
      using the per-participant chaining of the Application Secret
      design. (*)

   o  Initial specification proposal for an encryption mechanism to
      protect Application Messages using an AEAD scheme. (*)

   o  Initial specification proposal for an authentication mechanism of
      Application Messages using signatures. (*)

   o  Initial specification proposal for a padding mechanism to
      improving protection of Application Messages against traffic
      analysis. (*)

   o  Inversion of the Group Init Add and Application Secret derivations
      in the Handshake Key Schedule to be ease chaining in case we
      switch design. (*)

   o  Removal of the UserAdd construct and split of GroupAdd into Add
      and Welcome messages (*)

   o  Initial proposal for authenticating handshake messages by signing
      over group state and including group state in the key schedule (*)

   o  Added an appendix with example code for tree math

   o  Changed the ECIES mechanism used by TreeKEM so that it uses nonces
      generated from the shared secret

   draft-00

   o  Initial adoption of draft-barnes-mls-protocol-01 as a WG item.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.





Barnes, et al.          Expires September 7, 2020               [Page 7]


Internet-Draft                     MLS                        March 2020


   Client:  An agent that uses this protocol to establish shared
      cryptographic state with other clients.  A client is defined by
      the cryptographic keys it holds.

   Group:  A collection of clients with shared cryptographic state.

   Member:  A client that is included in the shared state of a group,
      hence has access to the group's secrets.

   Key Package:  A signed object describing a clients identity and
      capabilities, and including an HPKE public key that can be used to
      encrypt to that client.

   Initialization Key (InitKey):  A key package that is prepublished by
      a client, which other clients can use to introduce the client to a
      new group.

   Identity Key:  A long-lived signing key pair used to authenticate the
      sender of a message.

   Terminology specific to tree computations is described in Section 5.

   We use the TLS presentation language [RFC8446] to describe the
   structure of protocol messages.

3.  Basic Assumptions

   This protocol is designed to execute in the context of a Messaging
   Service (MS) as described in [I-D.ietf-mls-architecture].  In
   particular, we assume the MS provides the following services:

   o  A long-term identity key provider which allows clients to
      authenticate protocol messages in a group.

   o  A broadcast channel, for each group, which will relay a message to
      all members of a group.  For the most part, we assume that this
      channel delivers messages in the same order to all participants.
      (See Section 12 for further considerations.)

   o  A directory to which clients can publish key packages and download
      key packages for other participants.

4.  Protocol Overview

   The goal of this protocol is to allow a group of clients to exchange
   confidential and authenticated messages.  It does so by deriving a
   sequence of secrets and keys known only to members.  Those should be
   secret against an active network adversary and should have both



Barnes, et al.          Expires September 7, 2020               [Page 8]


Internet-Draft                     MLS                        March 2020


   forward secrecy and post-compromise security with respect to
   compromise of any members.

   We describe the information stored by each client as _state_, which
   includes both public and private data.  An initial state is set up by
   a group creator, which is a group containing only themself.  The
   creator then sends _Add_ proposals for each client in the initial set
   of members, followed by a _Commit_ message which incorporates all of
   the _Adds_ into the group state.  Finally, the group creator
   generates a _Welcome_ message corresponding to the Commit and sends
   this directly to all the new members, who can use the information it
   contains to set up their own group state and derive a shared secret.
   Members exchange Commit messages for post-compromise security, to add
   new members, and to remove existing members.  These messages produce
   new shared secrets which are causally linked to their predecessors,
   forming a logical Directed Acyclic Graph (DAG) of states.

   The protocol algorithms we specify here follow.  Each algorithm
   specifies both (i) how a client performs the operation and (ii) how
   other clients update their state based on it.

   There are three major operations in the lifecycle of a group:

   o  Adding a member, initiated by a current member;

   o  Updating the leaf secret of a member;

   o  Removing a member.

   Each of these operations is "proposed" by sending a message of the
   corresponding type (Add / Update / Remove).  The state of the group
   is not changed, however, until a Commit message is sent to provide
   the group with fresh entropy.  In this section, we show each proposal
   being committed immediately, but in more advanced deployment cases,
   an application might gather several proposals before committing them
   all at once.

   Before the initialization of a group, clients publish InitKeys (as
   KeyPackage objects) to a directory provided by the Messaging Service.












Barnes, et al.          Expires September 7, 2020               [Page 9]


Internet-Draft                     MLS                        March 2020


                                                                 Group
  A                B                C            Directory       Channel
  |                |                |                |              |
  | KeyPackageA    |                |                |              |
  |------------------------------------------------->|              |
  |                |                |                |              |
  |                | KeyPackageB    |                |              |
  |                |-------------------------------->|              |
  |                |                |                |              |
  |                |                | KeyPackageC    |              |
  |                |                |--------------->|              |
  |                |                |                |              |

   When a client A wants to establish a group with B and C, it first
   downloads KeyPackages for B and C.  It then initializes a group state
   containing only itself and uses the KeyPackages to compute Welcome
   and Add messages to add B and C, in a sequence chosen by A.  The
   Welcome messages are sent directly to the new members (there is no
   need to send them to the group).  The Add messages are broadcast to
   the group, and processed in sequence by B and C.  Messages received
   before a client has joined the group are ignored.  Only after A has
   received its Add messages back from the server does it update its
   state to reflect their addition.




























Barnes, et al.          Expires September 7, 2020              [Page 10]


Internet-Draft                     MLS                        March 2020


                                                                  Group
   A              B              C          Directory            Channel
   |              |              |              |                   |
   |         KeyPackageB, KeyPackageC           |                   |
   |<-------------------------------------------|                   |
   |state.init()  |              |              |                   |
   |              |              |              |                   |
   |              |              |              | Add(A->AB)        |
   |              |              |              | Commit(Add)       |
   |--------------------------------------------------------------->|
   |              |              |              |                   |
   |  Welcome(B)  |              |              |                   |
   |------------->|state.init()  |              |                   |
   |              |              |              |                   |
   |              |              |              | Add(A->AB)        |
   |              |              |              | Commit(Add)       |
   |<---------------------------------------------------------------|
   |state.add(B)  |<------------------------------------------------|
   |              |state.join()  |              |                   |
   |              |              |              |                   |
   |              |              |              | Add(AB->ABC)      |
   |              |              |              | Commit(Add)       |
   |--------------------------------------------------------------->|
   |              |              |              |                   |
   |              |  Welcome(C)  |              |                   |
   |---------------------------->|state.init()  |                   |
   |              |              |              |                   |
   |              |              |              | Add(AB->ABC)      |
   |              |              |              | Commit(Add)       |
   |<---------------------------------------------------------------|
   |state.add(C)  |<------------------------------------------------|
   |              |state.add(C)  |<---------------------------------|
   |              |              |state.join()  |                   |

   Subsequent additions of group members proceed in the same way.  Any
   member of the group can download a KeyPackage for a new client and
   broadcast an Add message that the current group can use to update
   their state and a Welcome message that the new client can use to
   initialize its state.

   To enforce forward secrecy and post-compromise security of messages,
   each member periodically updates their leaf secret.  Any member can
   update this information at any time by generating a fresh KeyPackage
   and sending an Update message followed by a Commit message.  Once all
   members have processed both, the group's secrets will be unknown to
   an attacker that had compromised the sender's prior leaf secret.





Barnes, et al.          Expires September 7, 2020              [Page 11]


Internet-Draft                     MLS                        March 2020


   It is left to the application to determine a policy for regularly
   sending Update messages.  This policy can be as strong as requiring
   an Update+Commit after each application message, or weaker, such as
   once every hour, day...

                                                             Group
   A              B     ...      Z          Directory        Channel
   |              |              |              |              |
   |              | Update(B)    |              |              |
   |              |------------------------------------------->|
   | Commit(Upd)  |              |              |              |
   |---------------------------------------------------------->|
   |              |              |              |              |
   |              |              |              | Update(B)    |
   |              |              |              | Commit(Upd)  |
   |<----------------------------------------------------------|
   |state.upd(B)  |<-------------------------------------------|
   |              |state.upd(B)  |<----------------------------|
   |              |              |state.upd(B)  |              |
   |              |              |              |              |

   Members are removed from the group in a similar way.  Any member of
   the group can send a Remove proposal followed by a Commit message,
   which adds new entropy to the group state that's known to all except
   the removed member.  Note that this does not necessarily imply that
   any member is actually allowed to evict other members; groups can
   enforce access control policies on top of these basic mechanism.

                                                             Group
   A              B     ...      Z          Directory       Channel
   |              |              |              |              |
   |              |              | Remove(B)    |              |
   |              |              | Commit(Rem)  |              |
   |              |              |---------------------------->|
   |              |              |              |              |
   |              |              |              | Remove(B)    |
   |              |              |              | Commit(Rem)  |
   |<----------------------------------------------------------|
   |state.del(B)  |              |<----------------------------|
   |              |              |state.del(B)  |              |
   |              |              |              |              |
   |              |              |              |              |

5.  Ratchet Trees

   The protocol uses "ratchet trees" for deriving shared secrets among a
   group of clients.




Barnes, et al.          Expires September 7, 2020              [Page 12]


Internet-Draft                     MLS                        March 2020


5.1.  Tree Computation Terminology

   Trees consist of _nodes_. A node is a _leaf_ if it has no children,
   and a _parent_ otherwise; note that all parents in our trees have
   precisely two children, a _left_ child and a _right_ child.  A node
   is the _root_ of a tree if it has no parents, and _intermediate_ if
   it has both children and parents.  The _descendants_ of a node are
   that node, its children, and the descendants of its children, and we
   say a tree _contains_ a node if that node is a descendant of the root
   of the tree.  Nodes are _siblings_ if they share the same parent.

   A _subtree_ of a tree is the tree given by the descendants of any
   node, the _head_ of the subtree.  The _size_ of a tree or subtree is
   the number of leaf nodes it contains.  For a given parent node, its
   _left subtree_ is the subtree with its left child as head
   (respectively _right subtree_).

   All trees used in this protocol are left-balanced binary trees.  A
   binary tree is _full_ (and _balanced_) if its size is a power of two
   and for any parent node in the tree, its left and right subtrees have
   the same size.  If a subtree is full and it is not a subset of any
   other full subtree, then it is _maximal_.

   A binary tree is _left-balanced_ if for every parent, either the
   parent is balanced, or the left subtree of that parent is the largest
   full subtree that could be constructed from the leaves present in the
   parent's own subtree.  Given a list of "n" items, there is a unique
   left-balanced binary tree structure with these elements as leaves.
   In such a left-balanced tree, the "k-th" leaf node refers to the
   "k-th" leaf node in the tree when counting from the left, starting
   from 0.

   (Note that left-balanced binary trees are the same structure that is
   used for the Merkle trees in the Certificate Transparency protocol
   [I-D.ietf-trans-rfc6962-bis].)

   The _direct path_ of a root is the empty list, and of any other node
   is the concatenation of that node's parent along with the parent's
   direct path.  The _copath_ of a node is the node's sibling
   concatenated with the list of siblings of all the nodes in its direct
   path.

   For example, in the below tree:

   o  The direct path of C is (CD, ABCD, ABCDEFG)

   o  The copath of C is (D, AB, EFG)




Barnes, et al.          Expires September 7, 2020              [Page 13]


Internet-Draft                     MLS                        March 2020


               ABCDEFG
              /      \
             /        \
            /          \
        ABCD            EFG
       /    \          /  \
      /      \        /    \
     AB      CD      EF    |
    / \     / \     / \    |
   A   B   C   D   E   F   G

                       1 1 1
   0 1 2 3 4 5 6 7 8 9 0 1 2

   Each node in the tree is assigned a _node index_, starting at zero
   and running from left to right.  A node is a leaf node if and only if
   it has an even index.  The node indices for the nodes in the above
   tree are as follows:

   o  0 = A

   o  1 = AB

   o  2 = B

   o  3 = ABCD

   o  4 = C

   o  5 = CD

   o  6 = D

   o  7 = ABCDEFG

   o  8 = E

   o  9 = EF

   o  10 = F

   o  11 = EFG

   o  12 = G

   The leaves of the tree are indexed separately, using a _leaf index_,
   since the protocol messages only need to refer to leaves in the tree.
   Like nodes, leaves are numbered left to right.  Note that given the



Barnes, et al.          Expires September 7, 2020              [Page 14]


Internet-Draft                     MLS                        March 2020


   above numbering, a node is a leaf node if and only if it has an even
   node index, and a leaf node's leaf index is half its node index.  The
   leaf indices in the above tree are as follows:

   o  0 = A

   o  1 = B

   o  2 = C

   o  3 = D

   o  4 = E

   o  5 = F

   o  6 = G

5.2.  Ratchet Tree Nodes

   A particular instance of a ratchet tree is based on the following
   cryptographic primitives, defined by the ciphersuite in use:

   o  An HPKE ciphersuite, which specifies a Key Encapsulation Mechanism
      (KEM), an AEAD encryption scheme, and a hash function

   o  A Derive-Key-Pair function that produces an asymmetric key pair
      for the specified KEM from a symmetric secret

   Each node in a ratchet tree contains up to five values:

   o  A private key (only within the member's direct path, see below)

   o  A public key

   o  An ordered list of leaf indices for "unmerged" leaves (see
      Section 5.3)

   o  A credential (only for leaf nodes)

   o  A hash of the node's parent, as of the last time the node was
      changed.

   The conditions under which each of these values must or must not be
   present are laid out in Section 5.3.

   A node in the tree may also be _blank_, indicating that no value is
   present at that node.  The _resolution_ of a node is an ordered list



Barnes, et al.          Expires September 7, 2020              [Page 15]


Internet-Draft                     MLS                        March 2020


   of non-blank nodes that collectively cover all non-blank descendants
   of the node.

   o  The resolution of a non-blank node comprises the node itself,
      followed by its list of unmerged leaves, if any

   o  The resolution of a blank leaf node is the empty list

   o  The resolution of a blank intermediate node is the result of
      concatenating the resolution of its left child with the resolution
      of its right child, in that order

   For example, consider the following tree, where the "_" character
   represents a blank node:

         _
       /   \
      /     \
     _       CD[C]
    / \     / \
   A   _   C   D

   0 1 2 3 4 5 6

   In this tree, we can see all of the above rules in play:

   o  The resolution of node 5 is the list [CD, C]

   o  The resolution of node 2 is the empty list []

   o  The resolution of node 3 is the list [A, CD, C]

   Every node, regardless of whether the node is blank or populated, has
   a corresponding _hash_ that summarizes the contents of the subtree
   below that node.  The rules for computing these hashes are described
   in Section 7.5.

5.3.  Views of a Ratchet Tree

   We generally assume that each participant maintains a complete and
   up-to-date view of the public state of the group's ratchet tree,
   including the public keys for all nodes and the credentials
   associated with the leaf nodes.

   No participant in an MLS group knows the private key associated with
   every node in the tree.  Instead, each member is assigned to a leaf
   of the tree, which determines the subset of private keys it knows.
   The credential stored at that leaf is one provided by the member.



Barnes, et al.          Expires September 7, 2020              [Page 16]


Internet-Draft                     MLS                        March 2020


   In particular, MLS maintains the members' views of the tree in such a
   way as to maintain the _tree invariant_:

   The private key for a node in the tree is known to a member of
   the group only if that member's leaf is a descendant of
   the node.

   In other words, if a node is not blank, then it holds a public key.
   The corresponding private key is known only to members occupying
   leaves below that node.

   The reverse implication is not true: A member may not know the
   private keys of all the intermediate nodes they're below.  Such a
   member has an _unmerged_ leaf.  Encrypting to an intermediate node
   requires encrypting to the node's public key, as well as the public
   keys of all the unmerged leaves below it.  A leaf is unmerged when it
   is first added, because the process of adding the leaf does not give
   it access to all of the nodes above it in the tree.  Leaves are
   "merged" as they receive the private keys for nodes, as described in
   Section 5.4.

5.4.  Ratchet Tree Evolution

   When performing a Commit, the leaf KeyPackage of the committer and
   its direct path to the root are updated with new secret values.  The
   HPKE leaf public key within the KeyPackage MUST be a freshly
   generated value to provide post-compromise security.

   The generator of the Commit starts by using the HPKE secret key
   "leaf_hpke_secret" associated with the new leaf KeyPackage (see
   Section 7) to compute "path_secret[0]" and generate a sequence of
   "path secrets", one for each ancestor of its leaf.  That is,
   path_secret[0] is used for the node directly above the leaf,
   path_secret[1] for its parent, and so on.  At each step, the path
   secret is used to derive a new secret value for the corresponding
   node, from which the node's key pair is derived.

   path_secret[0] = HKDF-Expand-Label(leaf_hpke_secret,
                                      "path", "", Hash.Length)
   path_secret[n] = HKDF-Expand-Label(path_secret[n-1],
                                      "path", "", Hash.Length)
   node_priv[n], node_pub[n] = Derive-Key-Pair(path_secret[n])

   For example, suppose there is a group with four members:







Barnes, et al.          Expires September 7, 2020              [Page 17]


Internet-Draft                     MLS                        March 2020


         G
        / \
       /   \
      /     \
     E       _
    / \     / \
   A   B   C   D

   If member B subsequently generates a Commit based on a secret
   "leaf_hpke_secret", then it would generate the following sequence of
   path secrets:

       path_secret[1] --> node_priv[1], node_pub[1]
            ^
            |
       path_secret[0] --> node_priv[0], node_pub[0]
            ^
            |
      leaf_hpke_secret

   After the Commit, the tree will have the following structure, where
   "np[i]" represents the node_priv values generated as described above:

             np[1]
            /     \
        np[0]      _
        /  \      / \
       A    B    C   D

5.5.  Synchronizing Views of the Tree

   The members of the group need to keep their views of the tree in sync
   and up to date.  When a client commits a change to the tree (e.g., to
   add or remove a member), it transmits a handshake message containing
   a set of public values for intermediate nodes in the direct path of a
   leaf.  The other members of the group can use these public values to
   update their view of the tree, aligning their copy of the tree to the
   sender's.

   To perform an update for a path (a Commit), the sender broadcasts to
   the group the following information for each node in the direct path
   of the leaf, including the root:

   o  The public key for the node

   o  Zero or more encrypted copies of the path secret corresponding to
      the node




Barnes, et al.          Expires September 7, 2020              [Page 18]


Internet-Draft                     MLS                        March 2020


   The path secret value for a given node is encrypted for the subtree
   corresponding to the parent's non-updated child, that is, the child
   on the copath of the leaf node.  There is one encrypted path secret
   for each public key in the resolution of the non-updated child.

   The recipient of a path update processes it with the following steps:

   1.  Compute the updated path secrets.

       *  Identify a node in the direct path for which the local member
          is in the subtree of the non-updated child.

       *  Identify a node in the resolution of the copath node for which
          this node has a private key.

       *  Decrypt the path secret for the parent of the copath node
          using the private key from the resolution node.

       *  Derive path secrets for ancestors of that node using the
          algorithm described above.

       *  The recipient SHOULD verify that the received public keys
          agree with the public keys derived from the new path_secret
          values.

   2.  Merge the updated path secrets into the tree.

       *  For all updated nodes,

          +  Replace the public key for each node with the received
             public key.

          +  Set the list of unmerged leaves to the empty list.

          +  Store the updated hash of the node's parent (represented as
             a ParentNode struct), going from root to leaf, so that each
             hash incorporates all the nodes above it.  The root node
             always has a zero-length hash for this value.

       *  For nodes where an updated path secret was computed in step 1,
          compute the corresponding node key pair and replace the values
          stored at the node with the computed values.

   For example, in order to communicate the example update described in
   the previous section, the sender would transmit the following values:






Barnes, et al.          Expires September 7, 2020              [Page 19]


Internet-Draft                     MLS                        March 2020


             +------------+----------------------------------+
             | Public Key | Ciphertext(s)                    |
             +------------+----------------------------------+
             | pk(ns[1])  | E(pk(C), ps[1]), E(pk(D), ps[1]) |
             |            |                                  |
             | pk(ns[0])  | E(pk(A), ps[0])                  |
             +------------+----------------------------------+

   In this table, the value pk(X) represents the public key derived from
   the node secret X.  The value E(K, S) represents the public-key
   encryption of the path secret S to the public key K.

6.  Cryptographic Objects

6.1.  Ciphersuites

   Each MLS session uses a single ciphersuite that specifies the
   following primitives to be used in group key computations:

   o  A hash function

   o  A Diffie-Hellman finite-field group or elliptic curve group

   o  An AEAD encryption algorithm [RFC5116]

   o  A signature algorithm

   The ciphersuite's Diffie-Hellman group is used to instantiate an HPKE
   [I-D.irtf-cfrg-hpke] instance for the purpose of public-key
   encryption.  The ciphersuite must specify an algorithm "Derive-Key-
   Pair" that maps octet strings with length Hash.length to HPKE key
   pairs.

   Ciphersuites are represented with the CipherSuite type.  HPKE public
   keys are opaque values in a format defined by the underlying Diffie-
   Hellman protocol (see the Ciphersuites section of the HPKE
   specification for more information).

   opaque HPKEPublicKey<1..2^16-1>;

   The signature algorithm specified in the ciphersuite is the mandatory
   algorithm to be used for signatures in MLSPlaintext and the tree
   signatures.  It MUST be the same as the signature algorithm specified
   in the credential field of the KeyPackage objects in the leaves of
   the tree (including the InitKeys used to add new members).

   The ciphersuites are defined in section Section 15.1.




Barnes, et al.          Expires September 7, 2020              [Page 20]


Internet-Draft                     MLS                        March 2020


   Depending on the Diffie-Hellman group of the ciphersuite, different
   rules apply to private key derivation and public key verification.
   For all ciphersuites defined in this document, the Derive-Key-Pair
   function begins by deriving a "key pair secret" of appropriate
   length, then converting it to a private key in the required group.
   The ciphersuite specifies the required length and the conversion.

   key_pair_secret = HKDF-Expand-Label(path_secret, "key pair",
                                       "", KeyPairSecretLength)

6.1.1.  X25519 and X448

   For X25519, the key pair secret is 32 octets long.  No conversion is
   required, since any 32-octet string is a valid X25519 private key.
   The corresponding public key is X25519(SHA-256(X), 9).

   For X448, the key pair secret is 56 octets long.  No conversion is
   required, since any 56-octet string is a valid X448 private key.  The
   corresponding public key is X448(SHA-256(X), 5).

   Implementations MUST use the approach specified in [RFC7748] to
   calculate the Diffie-Hellman shared secret.  Implementations MUST
   check whether the computed Diffie-Hellman shared secret is the all-
   zero value and abort if so, as described in Section 6 of [RFC7748].
   If implementers use an alternative implementation of these elliptic
   curves, they MUST perform the additional checks specified in
   Section 7 of [RFC7748]

6.1.1.1.  P-256 and P-521

   For P-256, the key pair secret is 32 octets long.  For P-521, the key
   pair secret is 66 octets long.  In either case, the private key
   derived from a key pair secret is computed by interpreting the key
   pair secret as a big-endian integer.

   ECDH calculations for these curves (including parameter and key
   generation as well as the shared secret calculation) are performed
   according to [IEEE1363] using the ECKAS-DH1 scheme with the identity
   map as key derivation function (KDF), so that the shared secret is
   the x-coordinate of the ECDH shared secret elliptic curve point
   represented as an octet string.  Note that this octet string (Z in
   IEEE 1363 terminology) as output by FE2OSP, the Field Element to
   Octet String Conversion Primitive, has constant length for any given
   field; leading zeros found in this octet string MUST NOT be
   truncated.

   (Note that this use of the identity KDF is a technicality.  The
   complete picture is that ECDH is employed with a non-trivial KDF



Barnes, et al.          Expires September 7, 2020              [Page 21]


Internet-Draft                     MLS                        March 2020


   because MLS does not directly use this secret for anything other than
   for computing other secrets.)

   Clients MUST validate remote public values by ensuring that the point
   is a valid point on the elliptic curve.  The appropriate validation
   procedures are defined in Section 4.3.7 of [X962] and alternatively
   in Section 5.6.2.3 of [keyagreement].  This process consists of three
   steps: (1) verify that the value is not the point at infinity (O),
   (2) verify that for Y = (x, y) both integers are in the correct
   interval, (3) ensure that (x, y) is a correct solution to the
   elliptic curve equation.  For these curves, implementers do not need
   to verify membership in the correct subgroup.

6.2.  Credentials

   A member of a group authenticates the identities of other
   participants by means of credentials issued by some authentication
   system, like a PKI.  Each type of credential MUST express the
   following data:

   o  The public key of a signature key pair

   o  The identity of the holder of the private key

   o  The signature scheme that the holder will use to sign MLS messages

   Credentials MAY also include information that allows a relying party
   to verify the identity / signing key binding.























Barnes, et al.          Expires September 7, 2020              [Page 22]


Internet-Draft                     MLS                        March 2020


   enum {
       basic(0),
       x509(1),
       (255)
   } CredentialType;

   struct {
       opaque identity<0..2^16-1>;
       SignatureScheme algorithm;
       SignaturePublicKey public_key;
   } BasicCredential;

   struct {
       CredentialType credential_type;
       select (Credential.credential_type) {
           case basic:
               BasicCredential;

           case x509:
               opaque cert_data<1..2^24-1>;
       };
   } Credential;

   The SignatureScheme type represents a signature algorithm.  Signature
   public keys are opaque values in a format defined by the signature
   scheme.

   enum {
       ecdsa_secp256r1_sha256(0x0403),
       ed25519(0x0807),
       (0xFFFF)
   } SignatureScheme;

   opaque SignaturePublicKey<1..2^16-1>;

   Note that each new credential that has not already been validated by
   the application MUST be validated against the Authentication Service.

7.  Key Packages

   In order to facilitate asynchronous addition of clients to a group,
   it is possible to pre-publish key packages that provide some public
   information about a user.  KeyPackage structures provide information
   about a client that any existing member can use to add this client to
   the group asynchronously.

   A KeyPackage object specifies a ciphersuite that the client supports,
   as well as providing a public key that others can use for key



Barnes, et al.          Expires September 7, 2020              [Page 23]


Internet-Draft                     MLS                        March 2020


   agreement.  The client's identity key can be updated throughout the
   lifetime of the group by sending a new KeyPackage with a new
   identity; the new identity MUST be validated by the authentication
   service.

   When used as InitKeys, KeyPackages are intended to be used only once
   and SHOULD NOT be reused except in case of last resort.  (See
   Section 14.4).  Clients MAY generate and publish multiple InitKeys to
   support multiple ciphersuites.

   KeyPackages contain a public key chosen by the client, which the
   client MUST ensure uniquely identifies a given KeyPackage object
   among the set of KeyPackages created by this client.

   The value for hpke_init_key MUST be a public key for the asymmetric
   encryption scheme defined by cipher_suite.  The whole structure is
   signed using the client's identity key.  A KeyPackage object with an
   invalid signature field MUST be considered malformed.  The input to
   the signature computation comprises all of the fields except for the
   signature field.































Barnes, et al.          Expires September 7, 2020              [Page 24]


Internet-Draft                     MLS                        March 2020


   enum {
       mls10(0),
       (255)
   } ProtocolVersion;

   enum {
       invalid(0),
       supported_versions(1),
       supported_ciphersuites(2),
       expiration(3),
       key_id(4),
       parent_hash(5),
       (65535)
   } ExtensionType;

   struct {
       ExtensionType extension_type;
       opaque extension_data<0..2^16-1>;
   } Extension;

   struct {
       ProtocolVersion version;
       CipherSuite cipher_suite;
       HPKEPublicKey hpke_init_key;
       Credential credential;
       Extension extensions<0..2^16-1>;
       opaque signature<0..2^16-1>;
   } KeyPackage;

   KeyPackage objects MUST contain at least two extensions, one of type
   "supported_versions" and one of type "supported_ciphersuites".  These
   extensions allow MLS session establishment to be safe from downgrade
   attacks on these two parameters (as discussed in Section 9), while
   still only advertising one version / ciphersuite per KeyPackage.

   As the "KeyPackage" is a structure which is stored in the Ratchet
   Tree and updated depending on the evolution of this tree, each
   modification of its content MUST be reflected by a change of its
   signature.  This allow other members to control the validity of the
   KeyPackage at any time and in particular in the case of a newcomer
   joining the group.

7.1.  Supported Versions and Supported Ciphersuites

   The "supported_versions" extension contains a list of MLS versions
   that are supported by the client.  The "supported_ciphersuites"
   extension contains a list of MLS ciphersuites that are supported by
   the client.



Barnes, et al.          Expires September 7, 2020              [Page 25]


Internet-Draft                     MLS                        March 2020


   ProtocolVersion supported_versions<0..255>;
   CipherSuite supported_ciphersuites<0..255>;

   These extensions MUST be always present in a KeyPackage.

7.2.  Expiration

   The "expiration" extension represents the time at which clients MUST
   consider this KeyPackage invalid.  This time is represented as an
   absolute time, measured in seconds since the Unix epoch
   (1970-01-01T00:00:00Z).  If a client receives a KeyPackage that
   contains an expiration extension at a time after its expiration time,
   then it MUST consider the KeyPackage invalid and not use it for any
   further processing.

   uint64 expiration;

   Applications that rely on "last resort" KeyPackages MAY set the
   expiration to its maximum value even though this is NOT RECOMMENDED.
   It is RECOMMENDED to rotate last resort keys at a pace chosen by the
   application even though they can have much longer lifetimes than
   other KeyPackages.

   This extension MUST always be present in a KeyPackage.

7.3.  KeyPackage Identifiers

   Within MLS, a KeyPackage is identified by its hash (see, e.g.,
   Section 10.2.1).  The "key_id" extension allows applications to add
   an explicit, application-defined identifier to a KeyPackage.

   opaque key_id<0..2^16-1>;

7.4.  Parent Hash

   The "parent_hash" extension serves to bind a KeyPackage to all the
   nodes above it in the group's ratchet tree.  This enforces the tree
   invariant, meaning that malicious members can't lie about the state
   of the ratchet tree when they send Welcome messages to new members.

   opaque parent_hash<0..255>;

   This extension MUST be present in all Updates that are sent as part
   of a Commit message.  If the extension is present, clients MUST
   verify that "parent_hash" matches the hash of the leaf's parent node
   when represented as a ParentNode struct.





Barnes, et al.          Expires September 7, 2020              [Page 26]


Internet-Draft                     MLS                        March 2020


   [[ OPEN ISSUE: This scheme, in which the tree hash covers the parent
   hash, is designed to allow for more deniable deployments, since a
   signature by a member covers only its direct path.  The other
   possible scheme, in which the parent hash covers the tree hash,
   provides better group agreement properties, since a member's
   signature covers the entire membership of the trees it is in.
   Further discussion is needed to determine whether the benefits to
   deniability justify the harm to group agreement properties, or
   whether there are alternative approaches to deniability that could be
   compatible with the other approach. ]]

7.5.  Tree Hashes

   To allow group members to verify that they agree on the public
   cryptographic state of the group, this section defines a scheme for
   generating a hash value that represents the contents of the group's
   ratchet tree and the members' KeyPackages.

   The hash of a tree is the hash of its root node, which we define
   recursively, starting with the leaves.

   Elements of the ratchet tree are called "Node" objects and the leaves
   contain an optional "KeyPackage", while the parents contain an
   optional "ParentNode".



























Barnes, et al.          Expires September 7, 2020              [Page 27]


Internet-Draft                     MLS                        March 2020


   struct {
       uint8 present;
       select (present) {
           case 0: struct{};
           case 1: T value;
       }
   } optional<T>;

   enum {
       leaf(0),
       parent(1),
       (255)
   } NodeType;

   struct {
       NodeType node_type;
       select (Node.node_type) {
           case leaf:   optional<KeyPackage> key_package;
           case parent: optional<ParentNode> node;
       };
   } Node;

   struct {
       HPKEPublicKey public_key;
       uint32_t unmerged_leaves<0..2^32-1>;
       opaque parent_hash<0..255>;
   } ParentNode;

   When computing the hash of a parent node, the "ParentNodeHashInput"
   structure is used:

   struct {
       uint32 node_index;
       optional<ParentNode> parent_node;
       opaque left_hash<0..255>;
       opaque right_hash<0..255>;
   } ParentNodeHashInput;

   The "left_hash" and "right_hash" fields hold the hashes of the node's
   left and right children, respectively.  When computing the hash of a
   leaf node, the hash of a "LeafNodeHashInput" object is used:

   struct {
       uint32 leaf_index;
       optional<KeyPackage> key_package;
   } LeafNodeHashInput;





Barnes, et al.          Expires September 7, 2020              [Page 28]


Internet-Draft                     MLS                        March 2020


7.6.  Group State

   Each member of the group maintains a GroupContext object that
   summarizes the state of the group:

   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       opaque tree_hash<0..255>;
       opaque confirmed_transcript_hash<0..255>;
       Extensions extensions<0..2^16-1>;
   } GroupContext;

   The fields in this state have the following semantics:

   o  The "group_id" field is an application-defined identifier for the
      group.

   o  The "epoch" field represents the current version of the group key.

   o  The "tree_hash" field contains a commitment to the contents of the
      group's ratchet tree and the credentials for the members of the
      group, as described in Section 7.5.

   o  The "confirmed_transcript_hash" field contains a running hash over
      the messages that led to this state.

   When a new member is added to the group, an existing member of the
   group provides the new member with a Welcome message.  The Welcome
   message provides the information the new member needs to initialize
   its GroupContext.

   Different changes to the group will have different effects on the
   group state.  These effects are described in their respective
   subsections of Section 10.1.  The following general rules apply:

   o  The "group_id" field is constant

   o  The "epoch" field increments by one for each Commit message that
      is processed

   o  The "tree_hash" is updated to represent the current tree and
      credentials

   o  The "confirmed_transcript_hash" is updated with the data for an
      MLSPlaintext message encoding a Commit message in two parts:





Barnes, et al.          Expires September 7, 2020              [Page 29]


Internet-Draft                     MLS                        March 2020


   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       Sender sender;
       ContentType content_type = commit;
       Commit commit;
   } MLSPlaintextCommitContent;

   struct {
       opaque confirmation<0..255>;
       opaque signature<0..2^16-1>;
   } MLSPlaintextCommitAuthData;

   confirmed_transcript_hash_[n] =
       Hash(interim_transcript_hash_[n-1] ||
           MLSPlaintextCommitContent_[n]);

   interim_transcript_hash_[n] =
       Hash(confirmed_transcript_hash_[n] ||
           MLSPlaintextCommitAuthData_[n]);

   Thus the "confirmed_transcript_hash" field in a GroupContext object
   represents a transcript over the whole history of MLSPlaintext Commit
   messages, up to the confirmation field in the current MLSPlaintext
   message.  The confirmation and signature fields are then included in
   the transcript for the next epoch.  The interim transcript hash is
   passed to new members in the WelcomeInfo struct, and enables existing
   members to incorporate a Commit message into the transcript without
   having to store the whole MLSPlaintextCommitAuthData structure.

   When a new group is created, the "interim_transcript_hash" field is
   set to the zero-length octet string.

7.7.  Direct Paths

   As described in Section 10.2, each MLS Commit message needs to
   transmit a KeyPackage leaf and node values along its direct path.
   The path contains a public key and encrypted secret value for all
   intermediate nodes in the path above the leaf.  The path is ordered
   from the closest node to the leaf to the root; each node MUST be the
   parent of its predecessor.










Barnes, et al.          Expires September 7, 2020              [Page 30]


Internet-Draft                     MLS                        March 2020


   struct {
       opaque kem_output<0..2^16-1>;
       opaque ciphertext<0..2^16-1>;
   } HPKECiphertext;

   struct {
       HPKEPublicKey public_key;
       HPKECiphertext encrypted_path_secret<0..2^16-1>;
   } DirectPathNode;

   struct {
       DirectPathNode nodes<0..2^16-1>;
   } DirectPath;

   The number of ciphertexts in the "encrypted_path_secret" vector MUST
   be equal to the length of the resolution of the corresponding copath
   node.  Each ciphertext in the list is the encryption to the
   corresponding node in the resolution.

   The HPKECiphertext values are computed as

   kem_output, context = SetupBaseI(node_public_key, "")
   ciphertext = context.Seal(group_context, path_secret)

   where "node_public_key" is the public key of the node that the path
   secret is being encrypted for, group_context is the current
   GroupContext object for the group, and the functions "SetupBaseI" and
   "Seal" are defined according to [I-D.irtf-cfrg-hpke].

   Decryption is performed in the corresponding way, using the private
   key of the resolution node and the ephemeral public key transmitted
   in the message.

7.8.  Key Schedule

   Group keys are derived using the HKDF-Extract and HKDF-Expand
   functions as defined in [RFC5869], as well as the functions defined
   below:













Barnes, et al.          Expires September 7, 2020              [Page 31]


Internet-Draft                     MLS                        March 2020


   HKDF-Expand-Label(Secret, Label, Context, Length) =
       HKDF-Expand(Secret, HKDFLabel, Length)

   Where HKDFLabel is specified as:

   struct {
       opaque group_context<0..255> = Hash(GroupContext_[n]);
       uint16 length = Length;
       opaque label<7..255> = "mls10 " + Label;
       opaque context<0..2^32-1> = Context;
   } HKDFLabel;

   Derive-Secret(Secret, Label) =
       HKDF-Expand-Label(Secret, Label, "", Hash.length)

   The Hash function used by HKDF is the ciphersuite hash algorithm.
   Hash.length is its output length in bytes.  In the below diagram:

   o  HKDF-Extract takes its salt argument from the top and its IKM
      argument from the left

   o  Derive-Secret takes its Secret argument from the incoming arrow

   When processing a handshake message, a client combines the following
   information to derive new epoch secrets:

   o  The init secret from the previous epoch

   o  The commit secret for the current epoch

   o  The GroupContext object for current epoch

   Given these inputs, the derivation of secrets for an epoch proceeds
   as shown in the following diagram:

















Barnes, et al.          Expires September 7, 2020              [Page 32]


Internet-Draft                     MLS                        March 2020


               init_secret_[n-1] (or 0)
                     |
                     V
    PSK (or 0) -> HKDF-Extract = early_secret
                     |
               Derive-Secret(., "derived", "")
                     |
                     V
commit_secret -> HKDF-Extract = epoch_secret
                     |
                     +--> HKDF-Expand(., "mls 1.0 welcome", Hash.length)
                     |    = welcome_secret
                     |
                     +--> Derive-Secret(., "sender data", GroupContext_[n])
                     |    = sender_data_secret
                     |
                     +--> Derive-Secret(., "handshake", GroupContext_[n])
                     |    = handshake_secret
                     |
                     +--> Derive-Secret(., "app", GroupContext_[n])
                     |    = application_secret
                     |
                     +--> Derive-Secret(., "exporter", GroupContext_[n])
                     |    = exporter_secret
                     |
                     +--> Derive-Secret(., "confirm", GroupContext_[n])
                     |    = confirmation_key
                     |
                     V
               Derive-Secret(., "init", GroupContext_[n])
                     |
                     V
               init_secret_[n]

7.9.  Pre-Shared Keys

   Groups which already have an out-of-band mechanism to generate shared
   group secrets can inject those in the MLS key schedule to seed the
   MLS group secrets computations by this external entropy.

   At any epoch, including the initial state, an application can decide
   to synchronize the injection of a PSK into the MLS key schedule.

   This mechanism can be used to improve security in the cases where
   having a full run of updates across members is too expensive or in
   the case where the external group key establishment mechanism
   provides stronger security against classical or quantum adversaries.




Barnes, et al.          Expires September 7, 2020              [Page 33]


Internet-Draft                     MLS                        March 2020


   The security level associated with the PSK injected in the key
   schedule SHOULD match at least the security level of the ciphersuite
   in use in the group.

   Note that, as a PSK may have a different lifetime than an update, it
   does not necessarily provide the same FS or PCS guarantees than a
   Commit message.

   [[OPEN ISSUE: We have to decide if we want an external coordination
   via the application of a Handshake proposal.]]

7.10.  Encryption Keys

   As described in Section 8, MLS encrypts three different types of
   information:

   o  Metadata (sender information)

   o  Handshake messages (Proposal and Commit)

   o  Application messages

   The sender information used to look up the key for the content
   encryption is encrypted under AEAD using a random nonce and the
   "sender_data_key" which is derived from the "sender_data_secret" as
   follows:

   sender_data_key =
       HKDF-Expand-Label(sender_data_secret, "sd key", "", key_length)

   For handshake and application messages, a sequence of keys is derived
   via a "sender ratchet".  Each sender has their own sender ratchet,
   and each step along the ratchet is called a "generation".

   A sender ratchet starts from a per-sender base secret.  For
   application keys, the base secret is derived as described in
   Section 13.1.  For handshake keys, base secrets are derived directly
   from the "handshake_secret".

   application_secret_[sender]_[0] = astree_node_[N]_secret

   handshake_secret_[sender]_[0] =
       HKDF-Expand-Label(handshake_secret, "hs", [sender], nonce_length)

   The base secret of for each sender is used to initiate a symmetric
   hash ratchet which generates a sequence of keys and nonces.  The
   sender uses the j-th key/nonce pair in the sequence to encrypt (using
   the AEAD) the j-th message they send during that epoch.  In



Barnes, et al.          Expires September 7, 2020              [Page 34]


Internet-Draft                     MLS                        March 2020


   particular, each key/nonce pair MUST NOT be used to encrypt more than
   one message.

   Keys, nonces and secrets of ratchets are derived using Derive-App-
   Secret.  The context in a given call consists of the index of the
   sender's leaf in the ratchet tree and the current position in the
   ratchet.  In particular, the index of the sender's leaf in the
   ratchet tree is the same as the index of the leaf in the AS Tree used
   to initialize the sender's ratchet.

   ratchet_secret_[N]_[j]
         |
         +--> Derive-App-Secret(., "nonce", N, j, AEAD.nonce_length)
         |    = ratchet_nonce_[N]_[j]
         |
         +--> Derive-App-Secret(., "key", N, j, AEAD.key_length)
         |    = ratchet_key_[N]_[j]
         |
         V
   Derive-App-Secret(., "secret", N, j, Hash.length)
   = ratchet_secret_[N]_[j+1]

   Here, AEAD.nonce_length and AEAD.key_length denote the lengths in
   bytes of the nonce and key for the AEAD scheme defined by the
   ciphersuite.  "ratchet" should be understood to mean "handshake" or
   "application" depending on the context.

7.11.  Exporters

   The main MLS key schedule provides an "exporter_secret" which can be
   used by an application as the basis to derive new secrets called
   "exported_value" outside the MLS layer.

   MLS-Exporter(Label, Context, key_length) =
          HKDF-Expand-Label(Derive-Secret(exporter_secret, Label),
                            "exporter", Hash(Context), key_length)

   The context used for the derivation of the "exported_value" MAY be
   empty while each application SHOULD provide a unique label as an
   input of the HKDF-Expand-Label for each use case.  This is to prevent
   two exported outputs from being generated with the same values and
   used for different functionalities.

   The exported values are bound to the Group epoch from which the
   "exporter_secret" is derived, hence reflects a particular state of
   the Group.





Barnes, et al.          Expires September 7, 2020              [Page 35]


Internet-Draft                     MLS                        March 2020


   It is RECOMMENDED for the application generating exported values to
   refresh those values after a group operation is processed.

8.  Message Framing

   Handshake and application messages use a common framing structure.
   This framing provides encryption to ensure confidentiality within the
   group, as well as signing to authenticate the sender within the
   group.

   The two main structures involved are MLSPlaintext and MLSCiphertext.
   MLSCiphertext represents a signed and encrypted message, with
   protections for both the content of the message and related metadata.
   MLSPlaintext represents a message that is only signed, and not
   encrypted.  Applications SHOULD use MLSCiphertext to encode both
   application and handshake messages, but MAY transmit handshake
   messages encoded as MLSPlaintext objects in cases where it is
   necessary for the delivery service to examine such messages.

   enum {
       invalid(0),
       application(1),
       proposal(2),
       commit(3),
       (255)
   } ContentType;

   enum {
       invalid(0),
       member(1),
       preconfigured(2),
       new_member(3),
       (255)
   } SenderType;

   struct {
       SenderType sender_type;
       uint32 sender;
   } Sender;

   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       Sender sender;
       opaque authenticated_data<0..2^32-1>;

       ContentType content_type;
       select (MLSPlaintext.content_type) {



Barnes, et al.          Expires September 7, 2020              [Page 36]


Internet-Draft                     MLS                        March 2020


           case application:
             opaque application_data<0..2^32-1>;

           case proposal:
             Proposal proposal;

           case commit:
             Commit commit;
             opaque confirmation<0..255>;
       }

       opaque signature<0..2^16-1>;
   } MLSPlaintext;

   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       ContentType content_type;
       opaque authenticated_data<0..2^32-1>;
       opaque sender_data_nonce<0..255>;
       opaque encrypted_sender_data<0..255>;
       opaque ciphertext<0..2^32-1>;
   } MLSCiphertext;

   External sender types are sent as MLSPlaintext, see Section 10.1.4
   for their use.

   The remainder of this section describes how to compute the signature
   of an MLSPlaintext object and how to convert it to an MLSCiphertext
   object for "member" sender types.  The steps are:

   o  Set group_id, epoch, content_type and authenticated_data fields
      from the MLSPlaintext object directly

   o  Randomly generate the sender_data_nonce field

   o  Identify the key and key generation depending on the content type

   o  Encrypt an MLSSenderData object for the encrypted_sender_data
      field from MLSPlaintext and the key generation

   o  Generate and sign an MLSPlaintextTBS object from the MLSPlaintext
      object

   o  Encrypt an MLSCiphertextContent for the ciphertext field using the
      key identified, the signature, and MLSPlaintext object





Barnes, et al.          Expires September 7, 2020              [Page 37]


Internet-Draft                     MLS                        March 2020


   Decryption is done by decrypting the metadata, then the message, and
   then verifying the content signature.

   The following sections describe the encryption and signing processes
   in detail.

8.1.  Metadata Encryption

   The "sender data" used to look up the key for the content encryption
   is encrypted under AEAD using the MLSCiphertext sender_data_nonce and
   the sender_data_key from the keyschedule.  It is encoded as an object
   of the following form:

   struct {
       uint32 sender;
       uint32 generation;
       opaque reuse_guard[4];
   } MLSSenderData;

   MLSSenderData.sender is assumed to be a "member" sender type.  When
   constructing an MLSSenderData from a Sender object, the sender MUST
   verify Sender.sender_type is "member" and use Sender.sender for
   MLSSenderData.sender.

   The "reuse_guard" field contains a fresh random value used to avoid
   nonce reuse in the case of state loss or corruption, as described in
   Section 8.2.

   The Additional Authenticated Data (AAD) for the SenderData ciphertext
   computation is its prefix in the MLSCiphertext, namely:

   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       ContentType content_type;
       opaque authenticated_data<0..2^32-1>;
       opaque sender_data_nonce<0..255>;
   } MLSCiphertextSenderDataAAD;

   When parsing a SenderData struct as part of message decryption, the
   recipient MUST verify that the sender field represents an occupied
   leaf in the ratchet tree.  In particular, the sender index value MUST
   be less than the number of leaves in the tree.








Barnes, et al.          Expires September 7, 2020              [Page 38]


Internet-Draft                     MLS                        March 2020


8.2.  Content Signing and Encryption

   The signature field in an MLSPlaintext object is computed using the
   signing private key corresponding to the credential at the leaf in
   the tree indicated by the sender field.  The signature covers the
   plaintext metadata and message content, which is all of MLSPlaintext
   except for the "signature" field.  The signature also covers the
   GroupContext for the current epoch, so that signatures are specific
   to a given group and epoch.

   struct {
       GroupContext context;

       opaque group_id<0..255>;
       uint64 epoch;
       Sender sender;
       opaque authenticated_data<0..2^32-1>;

       ContentType content_type;
       select (MLSPlaintextTBS.content_type) {
           case application:
             opaque application_data<0..2^32-1>;

           case proposal:
             Proposal proposal;

           case commit:
             Commit commit;
             opaque confirmation<0..255>;
       }
   } MLSPlaintextTBS;

   The ciphertext field of the MLSCiphertext object is produced by
   supplying the inputs described below to the AEAD function specified
   by the ciphersuite in use.  The plaintext input contains content and
   signature of the MLSPlaintext, plus optional padding.  These values
   are encoded in the following form:














Barnes, et al.          Expires September 7, 2020              [Page 39]


Internet-Draft                     MLS                        March 2020


   struct {
       select (MLSCiphertext.content_type) {
           case application:
             opaque application_data<0..2^32-1>;

           case proposal:
             Proposal proposal;

           case commit:
             Commit commit;
             opaque confirmation<0..255>;
       }

       opaque signature<0..2^16-1>;
       opaque padding<0..2^16-1>;
   } MLSCiphertextContent;

   The key and nonce used for the encryption of the message depend on
   the content type of the message.  The sender chooses the handshake
   key for a handshake message or an unused generation from its (per-
   sender) application key chain for the current epoch, according to the
   type of message being encrypted.

   Before use in the encryption operation, the nonce is XORed with a
   fresh random value to guard against reuse.  Because the key schedule
   generates nonces deterministically, a client must keep persistent
   state as to where in the key schedule it is; if this persistent state
   is lost or corrupted, a client might reuse a generation that has
   already been used, causing reuse of a key/nonce pair.

   To avoid this situation, the sender of a message MUST generate a
   fresh random 4-byte "reuse guard" value and XOR it with the first
   four bytes of the nonce from the key schedule before using the nonce
   for encryption.  The sender MUST include the reuse guard in the
   "reuse_guard" field of the sender data object, so that the recipient
   of the message can use it to compute the nonce to be used for
   decryption.














Barnes, et al.          Expires September 7, 2020              [Page 40]


Internet-Draft                     MLS                        March 2020


   +-+-+-+-+---------...---+
   |   Key Schedule Nonce  |
   +-+-+-+-+---------...---+
              XOR
   +-+-+-+-+---------...---+
   | Guard |       0       |
   +-+-+-+-+---------...---+
              ===
   +-+-+-+-+---------...---+
   | Encrypt/Decrypt Nonce |
   +-+-+-+-+---------...---+

   The Additional Authenticated Data (AAD) input to the encryption
   contains an object of the following form, with the values used to
   identify the key and nonce:

   struct {
       opaque group_id<0..255>;
       uint64 epoch;
       ContentType content_type;
       opaque authenticated_data<0..2^32-1>;
       opaque sender_data_nonce<0..255>;
       opaque encrypted_sender_data<0..255>;
   } MLSCiphertextContentAAD;

   The ciphertext field of the MLSCiphertext object is produced by
   supplying these inputs to the AEAD function specified by the
   ciphersuite in use.

9.  Group Creation

   A group is always created with a single member, the "creator".  The
   other members are added when the creator effectively sends itself an
   Add proposal and commits it, then sends the corresponding Welcome
   message to the new participants.  These processes are described in
   detail in Section 10.1.1, Section 10.2, and Section 10.2.1.

   The creator of a group MUST take the following steps to initialize
   the group:

   o  Fetch KeyPackages for the members to be added, and selects a
      version and ciphersuite according to the capabilities of the
      members.  To protect against downgrade attacks, the creator MUST
      use the "supported_versions" and "supported_ciphersuites" fields
      in these KeyPackages to verify that the chosen version and
      ciphersuite is the best option supported by all members.





Barnes, et al.          Expires September 7, 2020              [Page 41]


Internet-Draft                     MLS                        March 2020


   o  Initialize a one-member group with the following initial values
      (where "0" represents an all-zero vector of size Hash.length):

      *  Ratchet tree: A tree with a single node, a leaf containing an
         HPKE public key and credential for the creator

      *  Group ID: A value set by the creator

      *  Epoch: 0

      *  Tree hash: The root hash of the above ratchet tree

      *  Confirmed transcript hash: 0

      *  Interim transcript hash: 0

      *  Init secret: 0

   o  For each member, construct an Add proposal from the KeyPackage for
      that member (see Section 10.1.1)

   o  Construct a Commit message that commits all of the Add proposals,
      in any order chosen by the creator (see Section 10.2)

   o  Process the Commit message to obtain a new group state (for the
      epoch in which the new members are added) and a Welcome message

   o  Transmit the Welcome message to the other new members

   The recipient of a Welcome message processes it as described in
   Section 10.2.1.

   In principle, the above process could be streamlined by having the
   creator directly create a tree and choose a random value for first
   epoch's epoch secret.  We follow the steps above because it removes
   unnecessary choices, by which, for example, bad randomness could be
   introduced.  The only choices the creator makes here are its own
   KeyPackage, the leaf secret from which the Commit is built, and the
   intermediate key pairs along the direct path to the root.

   A new member receiving a Welcome message can recognize group creation
   if the number of entries in the "members" array is equal to the
   number of leaves in the tree minus one.  A client receiving a Welcome
   message SHOULD verify whether it is a newly created group, and if so,
   SHOULD verify that the above process was followed by reconstructing
   the Add and Commit messages and verifying that the resulting
   transcript hashes and epoch secret match those found in the Welcome
   message.



Barnes, et al.          Expires September 7, 2020              [Page 42]


Internet-Draft                     MLS                        March 2020


10.  Group Evolution

   Over the lifetime of a group, its membership can change, and existing
   members might want to change their keys in order to achieve post-
   compromise security.  In MLS, each such change is accomplished by a
   two-step process:

   1.  A proposal to make the change is broadcast to the group in a
       Proposal message

   2.  A member of the group broadcasts a Commit message that causes one
       or more proposed changes to enter into effect

   The group thus evolves from one cryptographic state to another each
   time a Commit message is sent and processed.  These states are
   referred to as "epochs" and are uniquely identified among states of
   the group by eight-octet epoch values.  When a new group is
   initialized, its initial state epoch 0x0000000000000000.  Each time a
   state transition occurs, the epoch number is incremented by one.

   [[ OPEN ISSUE: It would be better to have non-linear epochs, in order
   to tolerate forks in the history.  There is a need to discuss whether
   we want to keep lexicographical ordering for the public value we
   serialize in the common framing, as it influence the ability of the
   DS to order messages.]]

10.1.  Proposals

   Proposals are included in an MLSPlaintext by way of a Proposal
   structure that indicates their type:

   enum {
       invalid(0),
       add(1),
       update(2),
       remove(3),
       (255)
   } ProposalType;

   struct {
       ProposalType msg_type;
       select (Proposal.msg_type) {
           case add:    Add;
           case update: Update;
           case remove: Remove;
       };
   } Proposal;




Barnes, et al.          Expires September 7, 2020              [Page 43]


Internet-Draft                     MLS                        March 2020


   On receiving an MLSPlaintext containing a Proposal, a client MUST
   verify the signature on the enclosing MLSPlaintext.  If the signature
   verifies successfully, then the Proposal should be cached in such a
   way that it can be retrieved using a ProposalID in a later Commit
   message.

10.1.1.  Add

   An Add proposal requests that a client with a specified KeyPackage be
   added to the group.

   struct {
       KeyPackage key_package;
   } Add;

   The proposer of the Add does not control where in the group's ratchet
   tree the new member is added.  Instead, the sender of the Commit
   message chooses a location for each added member and states it in the
   Commit message.

   An Add is applied after being included in a Commit message.  The
   position of the Add in the list of adds determines the leaf index
   "index" where the new member will be added.  For the first Add in the
   Commit, "index" is the leftmost empty leaf in the tree, for the
   second Add, the next empty leaf to the right, etc.

   o  If necessary, extend the tree to the right until it has at least
      index + 1 leaves

   o  For each non-blank intermediate node along the path from the leaf
      at position "index" to the root, add "index" to the
      "unmerged_leaves" list for the node.

   o  Set the leaf node in the tree at position "index" to a new node
      containing the public key from the KeyPackage in the Add, as well
      as the credential under which the KeyPackage was signed

10.1.2.  Update

   An Update proposal is a similar mechanism to Add with the distinction
   that it is the sender's leaf KeyPackage in the tree which would be
   updated with a new KeyPackage.

   struct {
       KeyPackage key_package;
   } Update;





Barnes, et al.          Expires September 7, 2020              [Page 44]


Internet-Draft                     MLS                        March 2020


   A member of the group applies an Update message by taking the
   following steps:

   o  Replace the sender's leaf KeyPackage with the one contained in the
      Update proposal

   o  Blank the intermediate nodes along the path from the sender's leaf
      to the root

10.1.3.  Remove

   A Remove proposal requests that the client at a specified index in
   the tree be removed from the group.

   struct {
       uint32 removed;
   } Remove;

   A member of the group applies a Remove message by taking the
   following steps:

   o  Replace the leaf node at position "removed" with a blank node

   o  Blank the intermediate nodes along the path from the removed leaf
      to the root

10.1.4.  External Proposals

   Add and Remove proposals can be constructed and sent to the group by
   a party that is outside the group.  For example, a Delivery Service
   might propose to remove a member of a group has been inactive for a
   long time, or propose adding a newly-hired staff member to a group
   representing a real-world team.  Proposals originating outside the
   group are identified by an "preconfigured" or "new_member" SenderType
   in MLSPlaintext.

   The "new_member" SenderType is used for clients proposing that they
   themselves be added.  For this ID type the sender value MUST be zero.
   Proposals with types other than Add MUST NOT be sent with this sender
   type.  In such cases, the MLSPlaintext MUST be signed with the
   private key corresponding to the KeyPackage in the Add message.
   Recipients MUST verify that the MLSPlaintext carrying the Proposal
   message is validly signed with this key.

   The "preconfigured" SenderType is reserved for signers that are pre-
   provisioned to the clients within a group.  If proposals with these
   sender IDs are to be accepted within a group, the members of the
   group MUST be provisioned by the application with a mapping between



Barnes, et al.          Expires September 7, 2020              [Page 45]


Internet-Draft                     MLS                        March 2020


   these IDs and authorized signing keys.  To ensure consistent handling
   of external proposals, the application MUST ensure that the members
   of a group have the same mapping and apply the same policies to
   external proposals.

   An external proposal MUST be sent as an MLSPlaintext object, since
   the sender will not have the keys necessary to construct an
   MLSCiphertext object.

   [[ TODO: Should recognized external signers be added to some object
   that the group explicitly agrees on, e.g., as an extension to the
   GroupContext? ]]

10.2.  Commit

   A Commit message initiates a new epoch for the group, based on a
   collection of Proposals.  It instructs group members to update their
   representation of the state of the group by applying the proposals
   and advancing the key schedule.

   Each proposal covered by the Commit is identified by a ProposalID
   value, which contains the hash of the MLSPlaintext in which the
   Proposal was sent, using the hash function from the group's
   ciphersuite.

   opaque ProposalID<0..255>;

   struct {
       ProposalID updates<0..2^16-1>;
       ProposalID removes<0..2^16-1>;
       ProposalID adds<0..2^16-1>;

       KeyPackage key_package;
       DirectPath path;
   } Commit;

   A group member that has observed one or more proposals within an
   epoch MUST send a Commit message before sending application data.
   This ensures, for example, that any members whose removal was
   proposed during the epoch are actually removed before any application
   data is transmitted.

   The sender of a Commit MUST include all valid proposals that it has
   received during the current epoch.  Invalid proposals include, for
   example, proposals with an invalid signature or proposals that are
   semantically invalid, such as an Add when the sender does not have
   the application-level permission to add new users.  If there are
   multiple proposals that apply to the same leaf, the committer chooses



Barnes, et al.          Expires September 7, 2020              [Page 46]


Internet-Draft                     MLS                        March 2020


   one and includes only that one in the Commit, considering the rest
   invalid.  The committer MUST prefer any Remove received, or the most
   recent Update for the leaf if there are no Removes.  If there are
   multiple Add proposals for the same client, the committer again
   chooses one to include and considers the rest invalid.

   The Commit MUST NOT combine proposals sent within different epochs.
   In the event that a valid proposal is omitted from the next Commit,
   the sender of the proposal SHOULD retransmit it in the new epoch.

   [[ OPEN ISSUE: This structure loses the welcome_info_hash, because
   new participants are no longer expected to have access to the Commit
   message adding them to the group.  It might be we need to re-
   introduce this assumption, though it seems like the information
   confirmed by the welcome_info_hash is confirmed at the next epoch
   change anyway. ]]

   A member of the group creates a Commit message and the corresponding
   Welcome message at the same time, by taking the following steps:

   o  Construct an initial Commit object with "updates", "removes", and
      "adds" fields populated from Proposals received during the current
      epoch, and empty "key_package" and "path" fields.

   o  Generate a provisional GroupContext object by applying the
      proposals referenced in the initial Commit object in the order
      provided, as described in Section 10.1.  Add proposals are applied
      left to right: Each Add proposal is applied at the leftmost
      unoccupied leaf, or appended to the right edge of the tree if all
      leaves are occupied.

   o  Create a DirectPath using the new tree (which includes any new
      members).  The GroupContext for this operation uses the
      "group_id", "epoch", "tree", and "prior_confirmed_transcript_hash"
      values in the initial GroupInfo object.

      *  Assign this DirectPath to the "path" fields in the Commit and
         GroupInfo objects.

      *  Apply the DirectPath to the tree, as described in Section 5.5.
         Define "commit_secret" as the value "path_secret[n+1]" derived
         from the "path_secret[n]" value assigned to the root node.

   o  Generate a new KeyPackage for the Committer's own leaf, with a
      "parent_hash" extension.  Store it in the ratchet tree and assign
      it to the "key_package" field in the Commit object.





Barnes, et al.          Expires September 7, 2020              [Page 47]


Internet-Draft                     MLS                        March 2020


   o  Construct an MLSPlaintext object containing the Commit object.
      Use the "commit_secret" to advance the key schedule and compute
      the "confirmation" value in the MLSPlaintext.  Sign the
      MLSPlaintext using the current epoch's GroupContext as context.

   o  Update the tree in the provisional state by applying the direct
      path

   o  Construct a GroupInfo reflecting the new state:

      *  Group ID, epoch, tree, confirmed transcript hash, and interim
         transcript hash from the new state

      *  The confirmation from the MLSPlaintext object

      *  Sign the GroupInfo using the member's private signing key

      *  Encrypt the GroupInfo using the key and nonce derived from the
         "epoch_secret" for the new epoch (see Section 10.2.1)

   o  For each new member in the group:

      *  Identify the lowest common ancestor in the tree of the new
         member's leaf node and the member sending the Commit

      *  Compute the path secret corresponding to the common ancestor
         node

      *  Compute an EncryptedGroupSecrets object that encapsulates the
         "init_secret" for the current epoch and the path secret for the
         common ancestor.

   o  Construct a Welcome message from the encrypted GroupInfo object
      and the encrypted group secrets.

   A member of the group applies a Commit message by taking the
   following steps:

   o  Verify that the "epoch" field of the enclosing MLSPlaintext
      message is equal to the "epoch" field of the current GroupContext
      object

   o  Verify that the signature on the MLSPlaintext message verifies
      using the public key from the credential stored at the leaf in the
      tree indicated by the "sender" field.

   o  Generate a provisional GroupContext object by applying the
      proposals referenced in the commit object in the order provided,



Barnes, et al.          Expires September 7, 2020              [Page 48]


Internet-Draft                     MLS                        March 2020


      as described in Section 10.1.  Add proposals are applied left to
      right: Each Add proposal is applied at the leftmost unoccupied
      leaf, or appended to the right edge of the tree if all leaves are
      occupied.

   o  Process the "path" value using the ratchet tree the provisional
      GroupContext, to update the ratchet tree and generate the
      "commit_secret":

      *  Apply the DirectPath to the tree, as described in Section 5.5,
         and store "key_package" at the Committer's leaf.

      *  Verify that the KeyPackage has a "parent_hash" extension and
         that its value matches the new parent of the sender's leaf
         node.

      *  Define "commit_secret" as the value "path_secret[n+1]" derived
         from the "path_secret[n]" value assigned to the root node.

   o  Update the new GroupContexts confirmed and interim transcript
      hashes using the new Commit.

   o  Use the "commit_secret", the provisional GroupContext, and the
      init secret from the previous epoch to compute the epoch secret
      and derived secrets for the new epoch.

   o  Use the "confirmation_key" for the new epoch to compute the
      confirmation MAC for this message, as described below, and verify
      that it is the same as the "confirmation" field in the
      MLSPlaintext object.

   o  If the above checks are successful, consider the updated
      GroupContext object as the current state of the group.

   The confirmation value confirms that the members of the group have
   arrived at the same state of the group:

   MLSPlaintext.confirmation =
       HMAC(confirmation_key, GroupContext.confirmed_transcript_hash)

   HMAC [RFC2104] uses the Hash algorithm for the ciphersuite in use.

   [[ OPEN ISSUE: It is not possible for the recipient of a handshake
   message to verify that ratchet tree information in the message is
   accurate, because each node can only compute the secret and private
   key for nodes in its direct path.  This creates the possibility that
   a malicious participant could cause a denial of service by sending a




Barnes, et al.          Expires September 7, 2020              [Page 49]


Internet-Draft                     MLS                        March 2020


   handshake message with invalid values for public keys in the ratchet
   tree. ]]

10.2.1.  Welcoming New Members

   The sender of a Commit message is responsible for sending a Welcome
   message to any new members added via Add proposals.  The Welcome
   message provides the new members with the current state of the group,
   after the application of the Commit message.  The new members will
   not be able to decrypt or verify the Commit message, but will have
   the secrets they need to participate in the epoch initiated by the
   Commit message.

   In order to allow the same Welcome message to be sent to all new
   members, information describing the group is encrypted with a
   symmetric key and nonce randomly chosen by the sender.  This key and
   nonce are then encrypted to each new member using HPKE.  In the same
   encrypted package, the committer transmits the path secret for the
   lowest node contained in the direct paths of both the committer and
   the new member.  This allows the new member to compute private keys
   for nodes in its direct path that are being reset by the
   corresponding Commit.





























Barnes, et al.          Expires September 7, 2020              [Page 50]


Internet-Draft                     MLS                        March 2020


   struct {
     opaque group_id<0..255>;
     uint64 epoch;
     optional<Node> tree<1..2^32-1>;
     opaque confirmed_transcript_hash<0..255>;
     opaque interim_transcript_hash<0..255>;
     Extensions extensions<0..2^16-1>;

     opaque confirmation<0..255>
     uint32 signer_index;
     opaque signature<0..2^16-1>;
   } GroupInfo;

   struct {
     opaque epoch_secret<1..255>;
     opaque path_secret<1..255>;
   } GroupSecrets;

   struct {
     opaque key_package_hash<1..255>;
     HPKECiphertext encrypted_group_secrets;
   } EncryptedGroupSecrets;

   struct {
     ProtocolVersion version = mls10;
     CipherSuite cipher_suite;
     EncryptedGroupSecrets secrets<0..2^32-1>;
     opaque encrypted_group_info<1..2^32-1>;
   } Welcome;

   In the description of the tree as a list of nodes, the "key_package"
   field for a node MUST be populated if and only if that node is a leaf
   in the tree.

   On receiving a Welcome message, a client processes it using the
   following steps:

   o  Identify an entry in the "secrets" array where the
      "key_package_hash" value corresponds to one of this client's
      KeyPackages, using the hash indicated by the "cipher_suite" field.
      If no such field exists, or if the ciphersuite indicated in the
      KeyPackage does not match the one in the Welcome message, return
      an error.

   o  Decrypt the "encrypted_group_secrets" using HPKE with the
      algorithms indicated by the ciphersuite and the HPKE private key
      corresponding to the GroupSecrets.




Barnes, et al.          Expires September 7, 2020              [Page 51]


Internet-Draft                     MLS                        March 2020


   o  From the "epoch_secret" in the decrypted GroupSecrets object,
      derive the "welcome_secret", "welcome_key", and "welcome_nonce".
      Use the key and nonce to decrypt the "encrypted_group_info" field.

welcome_secret = HKDF-Expand(epoch_secret, "mls 1.0 welcome", Hash.length)
welcome_nonce = HKDF-Expand(welcome_secret, "nonce", nonce_length)
welcome_key = HKDF-Expand(welcome_secret, "key", key_length)

   o  Verify the signature on the GroupInfo object.  The signature input
      comprises all of the fields in the GroupInfo object except the
      signature field.  The public key and algorithm are taken from the
      credential in the leaf node at position "signer_index".  If this
      verification fails, return an error.

   o  Verify the integrity of the ratchet tree.

      *  For each non-empty parent node, verify that exactly one of the
         node's children are non-empty and have the hash of this node
         set as their "parent_hash" value (if the child is another
         parent) or has a "parent_hash" extension in the KeyPackage
         containing the same value (if the child is a leaf).

      *  For each non-empty leaf node, verify the signature on the
         KeyPackage.

   o  Identify a leaf in the "tree" array (any even-numbered node) whose
      "key_package" field is identical to the the KeyPackage.  If no
      such field exists, return an error.  Let "index" represent the
      index of this node among the leaves in the tree, namely the index
      of the node in the "tree" array divided by two.

   o  Construct a new group state using the information in the GroupInfo
      object.  The new member's position in the tree is "index", as
      defined above.  In particular, the confirmed transcript hash for
      the new state is the "prior_confirmed_transcript_hash" in the
      GroupInfo object.

      *  Update the leaf at index "index" with the private key
         corresponding to the public key in the node.

      *  Identify the lowest common ancestor of the leaves at "index"
         and at "GroupInfo.signer_index".  Set the private key for this
         node to the private key derived from the "path_secret" in the
         KeyPackage object.

      *  For each parent of the common ancestor, up to the root of the
         tree, derive a new path secret and set the private key for the
         node to the private key derived from the path secret.  The



Barnes, et al.          Expires September 7, 2020              [Page 52]


Internet-Draft                     MLS                        March 2020


         private key MUST be the private key that corresponds to the
         public key in the node.

   o  Use the "epoch_secret" from the KeyPackage object to generate the
      epoch secret and other derived secrets for the current epoch.

   o  Set the confirmed transcript hash in the new state to the value of
      the "confirmed_transcript_hash" in the GroupInfo.

   o  Verify the confirmation MAC in the GroupInfo using the derived
      confirmation key and the "confirmed_transcript_hash" from the
      GroupInfo.

11.  Extensibility

   This protocol includes a mechanism for negotiating extension
   parameters similar to the one in TLS [RFC8446].  In TLS, extension
   negotiation is one-to-one: The client offers extensions in its
   ClientHello message, and the server expresses its choices for the
   session with extensions in its ServerHello and EncryptedExtensions
   messages.  In MLS, extensions appear in the following places:

   o  In KeyPackages, to describe client capabilities and aspects of
      their participation in the group (once in the ratchet tree)

   o  In the Welcome message, to tell new members of a group what
      parameters are being used by the group

   o  In the GroupContext object, to ensure that all members of the
      group have the same view of the parameters in use

   In other words, clients advertise their capabilities in KeyPackage
   extensions, the creator of the group expresses its choices for the
   group in Welcome extensions, and the GroupContext confirms that all
   members of the group have the same view of the group's extensions.

   This extension mechanism is designed to allow for secure and forward-
   compatible negotiation of extensions.  For this to work,
   implementations MUST correctly handle extensible fields:

   o  A client that posts a KeyPackage MUST support all parameters
      advertised in it.  Otherwise, another client might fail to
      interoperate by selecting one of those parameters.

   o  A client initiating a group MUST ignore all unrecognized
      ciphersuites, extensions, and other parameters.  Otherwise, it may
      fail to interoperate with newer clients.




Barnes, et al.          Expires September 7, 2020              [Page 53]


Internet-Draft                     MLS                        March 2020


   o  A client adding a new member to a group MUST verify that the
      KeyPackage for the new member contains extensions that are
      consistent with the group's extensions.  For each extension in the
      GroupContext, the KeyPackage MUST have an extension of the same
      type, and the contents of the extension MUST be consistent with
      the value of the extension in the GroupContext, according to the
      semantics of the specific extension.

   o  A client joining a group MUST populate the GroupContext extensions
      with exactly the contents of the extensions field in the Welcome
      message.  If any extension is unrecognized (i.e., not contained in
      the corresponding KeyPackage), then the client MUST reject the
      Welcome message and not join the group.

   Note that the latter two requirements mean that all MLS extensions
   are mandatory, in the sense that an extension in use by the group
   MUST be supported by all members of the group.

   This document does not define any way for the parameters of the group
   to change once it has been created; such a behavior could be
   implemented as an extension.

   [[ OPEN ISSUE: Should we put bounds on what an extension can change?
   For example, should we make an explicit guarantee that as long as
   you're speaking MLS 1.0, the format of the KeyPackage will remain the
   same?  (Analogous to the TLS invariant with regard to ClientHello.)
   If we are explicit that effectively arbitrary changes can be made to
   protocol behavior with the consent of the members, we will need to
   note that some such changes can undermine the security of the
   protocol. ]]

12.  Sequencing of State Changes

   [[ OPEN ISSUE: This section has an initial set of considerations
   regarding sequencing.  It would be good to have some more detailed
   discussion, and hopefully have a mechanism to deal with this issue.
   ]]

   Each Commit message is premised on a given starting state, indicated
   in its "prior_epoch" field.  If the changes implied by a Commit
   messages are made starting from a different state, the results will
   be incorrect.

   This need for sequencing is not a problem as long as each time a
   group member sends a Commit message, it is based on the most current
   state of the group.  In practice, however, there is a risk that two
   members will generate Commit messages simultaneously, based on the
   same state.



Barnes, et al.          Expires September 7, 2020              [Page 54]


Internet-Draft                     MLS                        March 2020


   When this happens, there is a need for the members of the group to
   deconflict the simultaneous Commit messages.  There are two general
   approaches:

   o  Have the delivery service enforce a total order

   o  Have a signal in the message that clients can use to break ties

   As long as Commit messages cannot be merged, there is a risk of
   starvation.  In a sufficiently busy group, a given member may never
   be able to send a Commit message, because he always loses to other
   members.  The degree to which this is a practical problem will depend
   on the dynamics of the application.

   It might be possible, because of the non-contributivity of
   intermediate nodes, that Commit messages could be applied one after
   the other without the Delivery Service having to reject any Commit
   message, which would make MLS more resilient regarding the
   concurrency of Commit messages.  The Messaging system can decide to
   choose the order for applying the state changes.  Note that there are
   certain cases (if no total ordering is applied by the Delivery
   Service) where the ordering is important for security, ie. all
   updates must be executed before removes.

   Regardless of how messages are kept in sequence, implementations MUST
   only update their cryptographic state when valid Commit messages are
   received.  Generation of Commit messages MUST NOT modify a client's
   state, since the endpoint doesn't know at that time whether the
   changes implied by the Commit message will succeed or not.

12.1.  Server-Enforced Ordering

   With this approach, the delivery service ensures that incoming
   messages are added to an ordered queue and outgoing messages are
   dispatched in the same order.  The server is trusted to break ties
   when two members send a Commit message at the same time.

   Messages should have a counter field sent in clear-text that can be
   checked by the server and used for tie-breaking.  The counter starts
   at 0 and is incremented for every new incoming message.  If two group
   members send a message with the same counter, the first message to
   arrive will be accepted by the server and the second one will be
   rejected.  The rejected message needs to be sent again with the
   correct counter number.

   To prevent counter manipulation by the server, the counter's
   integrity can be ensured by including the counter in a signed message
   envelope.



Barnes, et al.          Expires September 7, 2020              [Page 55]


Internet-Draft                     MLS                        March 2020


   This applies to all messages, not only state changing messages.

12.2.  Client-Enforced Ordering

   Order enforcement can be implemented on the client as well, one way
   to achieve it is to use a two step update protocol: the first client
   sends a proposal to update and the proposal is accepted when it gets
   50%+ approval from the rest of the group, then it sends the approved
   update.  Clients which didn't get their proposal accepted, will wait
   for the winner to send their update before retrying new proposals.

   While this seems safer as it doesn't rely on the server, it is more
   complex and harder to implement.  It also could cause starvation for
   some clients if they keep failing to get their proposal accepted.

13.  Application Messages

   The primary purpose of the Handshake protocol is to provide an
   authenticated group key exchange to clients.  In order to protect
   Application messages sent among the members of a group, the
   Application secret provided by the Handshake key schedule is used to
   derive nonces and encryption keys for the Message Protection Layer
   according to the Application Key Schedule.  That is, each epoch is
   equipped with a fresh Application Key Schedule which consist of a
   tree of Application Secrets as well as one symmetric ratchet per
   group member.

   Each client maintains their own local copy of the Application Key
   Schedule for each epoch during which they are a group member.  They
   derive new keys, nonces and secrets as needed while deleting old ones
   as soon as they have been used.

   Application messages MUST be protected with the Authenticated-
   Encryption with Associated-Data (AEAD) encryption scheme associated
   with the MLS ciphersuite using the common framing mechanism.  Note
   that "Authenticated" in this context does not mean messages are known
   to be sent by a specific client but only from a legitimate member of
   the group.  To authenticate a message from a particular member,
   signatures are required.  Handshake messages MUST use asymmetric
   signatures to strongly authenticate the sender of a message.

13.1.  Tree of Application Secrets

   The application key schedule begins with the application secrets
   which are arranged in an "Application Secret Tree" or AS Tree for
   short; a left balanced binary tree with the same set of nodes and
   edges as the epoch's ratchet tree.  Each leaf in the AS Tree is
   associated with the same group member as the corresponding leaf in



Barnes, et al.          Expires September 7, 2020              [Page 56]


Internet-Draft                     MLS                        March 2020


   the ratchet tree.  Nodes are also assigned an index according to
   their position in the array representation of the tree (described in
   Appendix A).  If N is a node index in the AS Tree then left(N) and
   right(N) denote the children of N (if they exist).

   Each node in the tree is assigned a secret.  The root's secret is
   simply the application_secret of that epoch.  (See Section 7.8 for
   the definition of application_secret.)

   astree_node_[root]_secret = application_secret

   The secret of any other node in the tree is derived from its parent's
   secret using a call to Derive-App-Secret.

   Derive-App-Secret(Secret, Label, Node, Generation, Length) =
       HKDF-Expand-Label(Secret, Label, ApplicationContext, Length)

   Where ApplicationContext is specified as:

   struct {
       uint32 node = Node;
       uint32 generation = Generation;
   } ApplicationContext;

   If N is a node index in the AS Tree then the secrets of the children
   of N are defined to be:

   astree_node_[N]_secret
           |
           |
           +--> Derive-App-Secret(., "tree", left(N), 0, Hash.length)
           |    = astree_node_[left(N)]_secret
           |
           +--> Derive-App-Secret(., "tree", right(N), 0, Hash.length)
                = astree_node_[right(N)]_secret

   Note that fixing concrete values for GroupContext_[n] and
   application_secret completely defines all secrets in the AS Tree.

   The secret in the leaf of the AS tree is used to initiate a symmetric
   hash ratchet, from which a sequence of single-use keys and nonces are
   derived, as described in Section 7.10.

13.2.  Deletion Schedule

   It is important to delete all security sensitive values as soon as
   they are _consumed_. A sensitive value S is said to be _consumed_ if




Barnes, et al.          Expires September 7, 2020              [Page 57]


Internet-Draft                     MLS                        March 2020


   o  S was used to encrypt or (successfully) decrypt a message, or if

   o  a key, nonce, or secret derived from S has been consumed.  (This
      goes for values derived via Derive-Secret as well as HKDF-Expand-
      Label.)

   Here, S may be the "init_secret", "commit_secret", "epoch_secret",
   "application_secret" as well as any secret in the AS Tree or one of
   the ratchets.

   As soon as a group member consumes a value they MUST immediately
   delete (all representations of) that value.  This is crucial to
   ensuring forward secrecy for past messages.  Members MAY keep
   unconsumed values around for some reasonable amount of time to handle
   out-of-order message delivery.

   For example, suppose a group member encrypts or (successfully)
   decrypts a message using the j-th key and nonce in the i-th ratchet.
   Then, for that member, at least the following values have been
   consumed and MUST be deleted:

   o  the "init_secret", "commit_secret", "epoch_secret",
      "application_secret" of that epoch,

   o  all node secrets in the AS Tree on the path from the root to the
      leaf with index i,

   o  the first j secrets in the i-th ratchet and

   o  "application_[i]_[j]_key" and "application_[i]_[j]_nonce".

   Concretely, suppose we have the following AS Tree and ratchet for
   participant D:

          G
        /   \
       /     \
      E       F
     / \     / \
   A0  B0  C0  D0 -+- KD0
               |   |
               |   +- ND0
               |
               D1 -+- KD1
               |   |
               |   +- ND1
               |
               D2



Barnes, et al.          Expires September 7, 2020              [Page 58]


Internet-Draft                     MLS                        March 2020


   Then if a client uses key KD1 and nonce ND1 during epoch n then it
   must consume (at least) values G, F, D0, D1, KD1, ND1 as well as the
   "commit_secret" and init_secret used to derive G (the
   application_secret).  The client MAY retain (not consume) the values
   KD0 and ND0 to allow for out-of-order delivery, and SHOULD retain D2
   to allow for processing future messages.

13.3.  Further Restrictions

   During each epoch senders MUST NOT encrypt more data than permitted
   by the security bounds of the AEAD scheme used.

   Note that each change to the Group through a Handshake message will
   also set a new application_secret.  Hence this change MUST be applied
   before encrypting any new Application message.  This is required both
   to ensure that any users removed from the group can no longer receive
   messages and to (potentially) recover confidentiality and
   authenticity for future messages despite a past state compromise.

   [[ OPEN ISSUE: At the moment there is no contributivity of
   Application secrets chained from the initial one to the next
   generation of Epoch secret.  While this seems safe because
   cryptographic operations using the application secrets can't affect
   the group init_secret, it remains to be proven correct. ]]

13.4.  Message Encryption and Decryption

   The group members MUST use the AEAD algorithm associated with the
   negotiated MLS ciphersuite to AEAD encrypt and decrypt their
   Application messages according to the Message Framing section.

   The group identifier and epoch allow a recipient to know which group
   secrets should be used and from which Epoch secret to start computing
   other secrets and keys.  The sender identifier is used to identify
   the member's symmetric ratchet from the initial group Application
   secret.  The application generation field is used to determine how
   far into the ratchet to iterate in order to reproduce the required
   AEAD keys and nonce for performing decryption.

   Application messages SHOULD be padded to provide some resistance
   against traffic analysis techniques over encrypted traffic.  [CLINIC]
   [HCJ16] While MLS might deliver the same payload less frequently
   across a lot of ciphertexts than traditional web servers, it might
   still provide the attacker enough information to mount an attack.  If
   Alice asks Bob: "When are we going to the movie ?" the answer
   "Wednesday" might be leaked to an adversary by the ciphertext length.
   An attacker expecting Alice to answer Bob with a day of the week




Barnes, et al.          Expires September 7, 2020              [Page 59]


Internet-Draft                     MLS                        March 2020


   might find out the plaintext by correlation between the question and
   the length.

   Similarly to TLS 1.3, if padding is used, the MLS messages MUST be
   padded with zero-valued bytes before AEAD encryption.  Upon AEAD
   decryption, the length field of the plaintext is used to compute the
   number of bytes to be removed from the plaintext to get the correct
   data.  As the padding mechanism is used to improve protection against
   traffic analysis, removal of the padding SHOULD be implemented in a
   "constant-time" manner at the MLS layer and above layers to prevent
   timing side-channels that would provide attackers with information on
   the size of the plaintext.  The padding length length_of_padding can
   be chosen at the time of the message encryption by the sender.
   Recipients can calculate the padding size from knowing the total size
   of the ApplicationPlaintext and the length of the content.

   [[ TODO: A preliminary formal security analysis has yet to be
   performed on this authentication scheme.]]

   [[ OPEN ISSUE: Should the padding be required for handshake messages
   ? Can an adversary get more than the position of a participant in the
   tree without padding ? Should the base ciphertext block length be
   negotiated or is is reasonable to allow to leak a range for the
   length of the plaintext by allowing to send a variable number of
   ciphertext blocks ? ]]

13.5.  Delayed and Reordered Application messages

   Since each Application message contains the group identifier, the
   epoch and a message counter, a client can receive messages out of
   order.  If they are able to retrieve or recompute the correct AEAD
   decryption key from currently stored cryptographic material clients
   can decrypt these messages.

   For usability, MLS clients might be required to keep the AEAD key and
   nonce for a certain amount of time to retain the ability to decrypt
   delayed or out of order messages, possibly still in transit while a
   decryption is being done.

   [[TODO: Describe here or in the Architecture spec the details.
   Depending on which Secret or key is kept alive, the security
   guarantees will vary.]]

14.  Security Considerations

   The security goals of MLS are described in [I-D.ietf-mls-
   architecture].  We describe here how the protocol achieves its goals




Barnes, et al.          Expires September 7, 2020              [Page 60]


Internet-Draft                     MLS                        March 2020


   at a high level, though a complete security analysis is outside of
   the scope of this document.

14.1.  Confidentiality of the Group Secrets

   Group secrets are derived from (i) previous group secrets, and (ii)
   the root key of a ratcheting tree.  Only group members know their
   leaf private key in the group, therefore, the root key of the group's
   ratcheting tree is secret and thus so are all values derived from it.

   Initial leaf keys are known only by their owner and the group
   creator, because they are derived from an authenticated key exchange
   protocol.  Subsequent leaf keys are known only by their owner.
   [[TODO: or by someone who replaced them.]]

   Note that the long-term identity keys used by the protocol MUST be
   distributed by an "honest" authentication service for clients to
   authenticate their legitimate peers.

14.2.  Authentication

   There are two forms of authentication we consider.  The first form
   considers authentication with respect to the group.  That is, the
   group members can verify that a message originated from one of the
   members of the group.  This is implicitly guaranteed by the secrecy
   of the shared key derived from the ratcheting trees: if all members
   of the group are honest, then the shared group key is only known to
   the group members.  By using AEAD or appropriate MAC with this shared
   key, we can guarantee that a member in the group (who knows the
   shared secret key) has sent a message.

   The second form considers authentication with respect to the sender,
   meaning the group members can verify that a message originated from a
   particular member of the group.  This property is provided by digital
   signatures on the messages under identity keys.

   [[ OPEN ISSUE: Signatures under the identity keys, while simple, have
   the side-effect of precluding deniability.  We may wish to allow
   other options, such as (ii) a key chained off of the identity key, or
   (iii) some other key obtained through a different manner, such as a
   pairwise channel that provides deniability for the message
   contents.]]

14.3.  Forward and post-compromise security

   Message encryption keys are derived via a hash ratchet, which
   provides a form of forward secrecy: learning a message key does not
   reveal previous message or root keys.  Post-compromise security is



Barnes, et al.          Expires September 7, 2020              [Page 61]


Internet-Draft                     MLS                        March 2020


   provided by Commit operations, in which a new root key is generated
   from the latest ratcheting tree.  If the adversary cannot derive the
   updated root key after an Commit operation, it cannot compute any
   derived secrets.

   In the case where the client could have been compromised (device
   loss...), the client SHOULD signal the delivery service to expire all
   the previous KeyPackages and publish fresh ones for PCS.

14.4.  InitKey Reuse

   InitKeys are intended to be used only once.  That is, once an InitKey
   has been used to introduce the corresponding client to a group, it
   SHOULD be deleted from the InitKey publication system.  Reuse of
   InitKeys can lead to replay attacks.

   An application MAY allow for reuse of a "last resort" InitKey in
   order to prevent denial of service attacks.  Since an InitKey is
   needed to add a client to a new group, an attacker could prevent a
   client being added to new groups by exhausting all available
   InitKeys.

15.  IANA Considerations

   This document requests the creation of the following new IANA
   registries: MLS Ciphersuites (Section 15.1).  All of these registries
   should be under a heading of "Message Layer Security", and
   assignments are made via the Specification Required policy [RFC8126].
   See Section 15.2 for additional information about the MLS Designated
   Experts (DEs).

15.1.  MLS Ciphersuites

   A ciphersuite is a combination of a protocol version and the set of
   cryptographic algorithms that should be used.

   Ciphersuite names follow the naming convention:

      CipherSuite MLS_LVL_KEM_AEAD_HASH_SIG = VALUE;

   Where VALUE is represented as two 8bit octets:

   uint8 CipherSuite[2];








Barnes, et al.          Expires September 7, 2020              [Page 62]


Internet-Draft                     MLS                        March 2020


   +-----------+-------------------------------------------------------+
   | Component | Contents                                              |
   +-----------+-------------------------------------------------------+
   | MLS       | The string "MLS" followed by the major and minor      |
   |           | version, e.g. "MLS10"                                 |
   |           |                                                       |
   | LVL       | The security level                                    |
   |           |                                                       |
   | KEM       | The KEM algorithm used for HPKE in TreeKEM group      |
   |           | operations                                            |
   |           |                                                       |
   | AEAD      | The AEAD algorithm used for HPKE and message          |
   |           | protection                                            |
   |           |                                                       |
   | HASH      | The hash algorithm used for HPKE and the MLS KDF      |
   |           |                                                       |
   | SIG       | The Signature algorithm used for message              |
   |           | authentication                                        |
   +-----------+-------------------------------------------------------+

   This specification defines the following ciphersuites for use with
   MLS 1.0.





























Barnes, et al.          Expires September 7, 2020              [Page 63]


Internet-Draft                     MLS                        March 2020


   +-------------------------------------------------------+-----------+
   | Description                                           | Value     |
   +-------------------------------------------------------+-----------+
   | MLS10_128_DHKEMX25519_AES128GCM_SHA256_Ed25519        | {         |
   |                                                       | 0x00,0x01 |
   |                                                       | }         |
   |                                                       |           |
   | MLS10_128_DHKEMP256_AES128GCM_SHA256_P256             | {         |
   |                                                       | 0x00,0x02 |
   |                                                       | }         |
   |                                                       |           |
   | MLS10_128_DHKEMX25519_CHACHA20POLY1305_SHA256_Ed25519 | {         |
   |                                                       | 0x00,0x03 |
   |                                                       | }         |
   |                                                       |           |
   | MLS10_256_DHKEMX448_AES256GCM_SHA512_Ed448            | {         |
   |                                                       | 0x00,0x04 |
   |                                                       | }         |
   |                                                       |           |
   | MLS10_256_DHKEMP521_AES256GCM_SHA512_P521             | {         |
   |                                                       | 0x00,0x05 |
   |                                                       | }         |
   |                                                       |           |
   | MLS10_256_DHKEMX448_CHACHA20POLY1305_SHA512_Ed448     | {         |
   |                                                       | 0x00,0x06 |
   |                                                       | }         |
   +-------------------------------------------------------+-----------+

   The KEM/DEM constructions used for HPKE are defined by
   [I-D.irtf-cfrg-hpke].  The corresponding AEAD algorithms
   AEAD_AES_128_GCM and AEAD_AES_256_GCM, are defined in [RFC5116].
   AEAD_CHACHA20_POLY1305 is defined in [RFC7539].  The corresponding
   hash algorithms are defined in [SHS].

   It is advisable to keep the number of ciphersuites low to increase
   the chances clients can interoperate in a federated environment,
   therefore the ciphersuites only inlcude modern, yet well-established
   algorithms.  Depending on their requirements, clients can choose
   between two security levels (roughly 128-bit and 256-bit).  Within
   the security levels clients can choose between faster X25519/X448
   curves and FIPS 140-2 compliant curves for Diffie-Hellman key
   negotiations.  Additionally clients that run predominantly on mobile
   processors can choose ChaCha20Poly1305 over AES-GCM for performance
   reasons.  Since ChaCha20Poly1305 is not listed by FIPS 140-2 it is
   not paired with FIPS 140-2 compliant curves.  The security level of
   symmetric encryption algorithms and hash functions is paired with the
   security level of the curves.




Barnes, et al.          Expires September 7, 2020              [Page 64]


Internet-Draft                     MLS                        March 2020


   The mandatory-to-implement ciphersuite for MLS 1.0 is
   "MLS10\_128\_HPKE25519\_AES128GCM\_SHA256\_Ed25519" which uses
   Curve25519, HKDF over SHA2-256 and AES-128-GCM for HPKE, and AES-
   128-GCM with Ed25519 for symmetric encryption and signatures.

   Values with the first byte 255 (decimal) are reserved for Private
   Use.

   New ciphersuite values are assigned by IANA as described in
   Section 15.

15.2.  MLS Designated Expert Pool

   [[ OPEN ISSUE: pick DE mailing address.  Maybe mls-des@ or mls-de-
   pool. ]]

   Specification Required [RFC8126] registry requests are registered
   after a three-week review period on the MLS DEs' mailing list:
   TBD@ietf.org [1], on the advice of one or more of the MLS DEs.
   However, to allow for the allocation of values prior to publication,
   the MLS DEs may approve registration once they are satisfied that
   such a specification will be published.

   Registration requests sent to the MLS DEs mailing list for review
   SHOULD use an appropriate subject (e.g., "Request to register value
   in MLS Bar registry").

   Within the review period, the MLS DEs will either approve or deny the
   registration request, communicating this decision to the MLS DEs
   mailing list and IANA.  Denials SHOULD include an explanation and, if
   applicable, suggestions as to how to make the request successful.
   Registration requests that are undetermined for a period longer than
   21 days can be brought to the IESG's attention for resolution using
   the iesg@ietf.org [2] mailing list.

   Criteria that SHOULD be applied by the MLS DEs includes determining
   whether the proposed registration duplicates existing functionality,
   whether it is likely to be of general applicability or useful only
   for a single application, and whether the registration description is
   clear.  For example, the MLS DEs will apply the ciphersuite-related
   advisory found in Section 6.1.

   IANA MUST only accept registry updates from the MLS DEs and SHOULD
   direct all requests for registration to the MLS DEs' mailing list.

   It is suggested that multiple MLS DEs be appointed who are able to
   represent the perspectives of different applications using this
   specification, in order to enable broadly informed review of



Barnes, et al.          Expires September 7, 2020              [Page 65]


Internet-Draft                     MLS                        March 2020


   registration decisions.  In cases where a registration decision could
   be perceived as creating a conflict of interest for a particular MLS
   DE, that MLS DE SHOULD defer to the judgment of the other MLS DEs.

16.  Contributors

   o  Joel Alwen
      Wickr
      joel.alwen@wickr.com

   o  Karthikeyan Bhargavan
      INRIA
      karthikeyan.bhargavan@inria.fr

   o  Cas Cremers
      University of Oxford
      cas.cremers@cs.ox.ac.uk

   o  Alan Duric
      Wire
      alan@wire.com

   o  Srinivas Inguva
      Twitter
      singuva@twitter.com

   o  Albert Kwon
      MIT
      kwonal@mit.edu

   o  Brendan McMillion
      Cloudflare
      brendan@cloudflare.com

   o  Eric Rescorla
      Mozilla
      ekr@rtfm.com

   o  Michael Rosenberg
      Trail of Bits
      michael.rosenberg@trailofbits.com

   o  Thyla van der Merwe
      Royal Holloway, University of London
      thyla.van.der@merwe.tech






Barnes, et al.          Expires September 7, 2020              [Page 66]


Internet-Draft                     MLS                        March 2020


17.  References

17.1.  Normative References

   [I-D.irtf-cfrg-hpke]
              Barnes, R. and K. Bhargavan, "Hybrid Public Key
              Encryption", draft-irtf-cfrg-hpke-02 (work in progress),
              November 2019.

   [IEEE1363]
              "IEEE Standard Specifications for Password-Based Public-
              Key Cryptographic Techniques", IEEE standard,
              DOI 10.1109/ieeestd.2009.4773330, n.d..

   [RFC2104]  Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104,
              DOI 10.17487/RFC2104, February 1997,
              <https://www.rfc-editor.org/info/rfc2104>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC5116]  McGrew, D., "An Interface and Algorithms for Authenticated
              Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008,
              <https://www.rfc-editor.org/info/rfc5116>.

   [RFC5869]  Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand
              Key Derivation Function (HKDF)", RFC 5869,
              DOI 10.17487/RFC5869, May 2010,
              <https://www.rfc-editor.org/info/rfc5869>.

   [RFC7539]  Nir, Y. and A. Langley, "ChaCha20 and Poly1305 for IETF
              Protocols", RFC 7539, DOI 10.17487/RFC7539, May 2015,
              <https://www.rfc-editor.org/info/rfc7539>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.






Barnes, et al.          Expires September 7, 2020              [Page 67]


Internet-Draft                     MLS                        March 2020


   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [SHS]      Dang, Q., "Secure Hash Standard", National Institute of
              Standards and Technology report,
              DOI 10.6028/nist.fips.180-4, July 2015.

   [X962]     ANSI, "Public Key Cryptography For The Financial Services
              Industry: The Elliptic Curve Digital Signature Algorithm
              (ECDSA)", ANSI X9.62, 1998.

17.2.  Informative References

   [art]      Cohn-Gordon, K., Cremers, C., Garratt, L., Millican, J.,
              and K. Milner, "On Ends-to-Ends Encryption: Asynchronous
              Group Messaging with Strong Security Guarantees", January
              2018, <https://eprint.iacr.org/2017/666.pdf>.

   [CLINIC]   Miller, B., Huang, L., Joseph, A., and J. Tygar, "I Know
              Why You Went to the Clinic: Risks and Realization of HTTPS
              Traffic Analysis", Privacy Enhancing Technologies pp.
              143-163, DOI 10.1007/978-3-319-08506-7_8, 2014.

   [dhreuse]  Menezes, A. and B. Ustaoglu, "On reusing ephemeral keys in
              Diffie-Hellman key agreement protocols", International
              Journal of Applied Cryptography Vol. 2, pp. 154,
              DOI 10.1504/ijact.2010.038308, 2010.

   [doubleratchet]
              Cohn-Gordon, K., Cremers, C., Dowling, B., Garratt, L.,
              and D. Stebila, "A Formal Security Analysis of the Signal
              Messaging Protocol", 2017 IEEE European Symposium on
              Security and Privacy (EuroS&P),
              DOI 10.1109/eurosp.2017.27, April 2017.

   [HCJ16]    Husak, M., &#268;ermak, M., Jirsik, T., and P.
              &#268;eleda, "HTTPS traffic analysis and client
              identification using passive SSL/TLS fingerprinting",
              EURASIP Journal on Information Security Vol. 2016,
              DOI 10.1186/s13635-016-0030-7, February 2016.

   [I-D.ietf-trans-rfc6962-bis]
              Laurie, B., Langley, A., Kasper, E., Messeri, E., and R.
              Stradling, "Certificate Transparency Version 2.0", draft-
              ietf-trans-rfc6962-bis-34 (work in progress), November
              2019.




Barnes, et al.          Expires September 7, 2020              [Page 68]


Internet-Draft                     MLS                        March 2020


   [keyagreement]
              Barker, E., Chen, L., Roginsky, A., and M. Smid,
              "Recommendation for Pair-Wise Key Establishment Schemes
              Using Discrete Logarithm Cryptography", National Institute
              of Standards and Technology report,
              DOI 10.6028/nist.sp.800-56ar2, May 2013.

   [RFC7748]  Langley, A., Hamburg, M., and S. Turner, "Elliptic Curves
              for Security", RFC 7748, DOI 10.17487/RFC7748, January
              2016, <https://www.rfc-editor.org/info/rfc7748>.

   [signal]   Perrin(ed), T. and M. Marlinspike, "The Double Ratchet
              Algorithm", n.d.,
              <https://www.signal.org/docs/specifications/
              doubleratchet/>.

17.3.  URIs

   [1] mailto:TBD@ietf.org

   [2] mailto:iesg@ietf.org

Appendix A.  Tree Math

   One benefit of using left-balanced trees is that they admit a simple
   flat array representation.  In this representation, leaf nodes are
   even-numbered nodes, with the n-th leaf at 2*n.  Intermediate nodes
   are held in odd-numbered nodes.  For example, a 11-element tree has
   the following structure:

                                                X
                        X
            X                       X                       X
      X           X           X           X           X
   X     X     X     X     X     X     X     X     X     X     X
   0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   This allows us to compute relationships between tree nodes simply by
   manipulating indices, rather than having to maintain complicated
   structures in memory, even for partial trees.  The basic rule is that
   the high-order bits of parent and child nodes have the following
   relation (where "x" is an arbitrary bit string):

   parent=01x => left=00x, right=10x

   The following python code demonstrates the tree computations
   necessary for MLS.  Test vectors can be derived from the diagram
   above.



Barnes, et al.          Expires September 7, 2020              [Page 69]


Internet-Draft                     MLS                        March 2020


   # The largest power of 2 less than n.  Equivalent to:
   #   int(math.floor(math.log(x, 2)))
   def log2(x):
       if x == 0:
           return 0

       k = 0
       while (x >> k) > 0:
           k += 1
       return k-1

   # The level of a node in the tree.  Leaves are level 0, their
   # parents are level 1, etc.  If a node's children are at different
   # level, then its level is the max level of its children plus one.
   def level(x):
       if x & 0x01 == 0:
           return 0

       k = 0
       while ((x >> k) & 0x01) == 1:
           k += 1
       return k

   # The number of nodes needed to represent a tree with n leaves
   def node_width(n):
       return 2*(n - 1) + 1

   # The index of the root node of a tree with n leaves
   def root(n):
       w = node_width(n)
       return (1 << log2(w)) - 1

   # The left child of an intermediate node.  Note that because the
   # tree is left-balanced, there is no dependency on the size of the
   # tree.  The child of a leaf node is itself.
   def left(x):
       k = level(x)
       if k == 0:
           return x

       return x ^ (0x01 << (k - 1))

   # The right child of an intermediate node.  Depends on the size of
   # the tree because the straightforward calculation can take you
   # beyond the edge of the tree.  The child of a leaf node is itself.
   def right(x, n):
       k = level(x)
       if k == 0:



Barnes, et al.          Expires September 7, 2020              [Page 70]


Internet-Draft                     MLS                        March 2020


           return x

       r = x ^ (0x03 << (k - 1))
       while r >= node_width(n):
           r = left(r)
       return r

   # The immediate parent of a node.  May be beyond the right edge of
   # the tree.
   def parent_step(x):
       k = level(x)
       b = (x >> (k + 1)) & 0x01
       return (x | (1 << k)) ^ (b << (k + 1))

   # The parent of a node.  As with the right child calculation, have
   # to walk back until the parent is within the range of the tree.
   def parent(x, n):
       if x == root(n):
           return x

       p = parent_step(x)
       while p >= node_width(n):
           p = parent_step(p)
       return p

   # The other child of the node's parent.  Root's sibling is itself.
   def sibling(x, n):
       p = parent(x, n)
       if x < p:
           return right(p, n)
       elif x > p:
           return left(p)

       return p

   # The direct path of a node, ordered from the root
   # down, not including the root or the terminal node
   def direct_path(x, n):
       d = []
       p = parent(x, n)
       r = root(n)
       while p != r:
           d.append(p)
           p = parent(p, n)
       return d

   # The copath of the node is the siblings of the nodes on its direct
   # path (including the node itself)



Barnes, et al.          Expires September 7, 2020              [Page 71]


Internet-Draft                     MLS                        March 2020


   def copath(x, n):
       d = dirpath(x, n)
       if x != sibling(x, n):
           d.append(x)

       return [sibling(y, n) for y in d]

   # The common ancestor of two leaves is the lowest node that is in the
   # lowest-level node that is in the direct paths of both leaves.
   def common_ancestor(x, y):
       xn, yn = x, y
       k = 0
       while xn != yn:
          xn, yn = xn >> 1, yn >> 1
          k += 1
       return (xn << k) + (1 << (k-1)) - 1

Authors' Addresses

   Richard Barnes
   Cisco

   Email: rlb@ipv.sx


   Benjamin Beurdouche
   Inria

   Email: benjamin.beurdouche@inria.fr


   Jon Millican
   Facebook

   Email: jmillican@fb.com


   Emad Omara
   Google

   Email: emadomara@google.com


   Katriel Cohn-Gordon
   University of Oxford

   Email: me@katriel.co.uk




Barnes, et al.          Expires September 7, 2020              [Page 72]


Internet-Draft                     MLS                        March 2020


   Raphael Robert
   Wire

   Email: raphael@wire.com















































Barnes, et al.          Expires September 7, 2020              [Page 73]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/