[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-gulbrandsen-imap-inthread) 00 01

Network Working Group                                   Arnt Gulbrandsen
Internet-Draft                                              July 8, 2010
Intended Status: Proposed Standard


          The IMAP SEARCH=INTHREAD and THREAD=REFS Extensions
                    draft-ietf-morg-inthread-01.txt


Status of this Memo

    This Internet-Draft is submitted to IETF in full conformance with
    the provisions of BCP 78 and BCP 79.

    Internet-Drafts are working documents of the Internet Engineering
    Task Force (IETF), its areas, and its working groups.  Note that
    other groups may also distribute working documents as Internet-
    Drafts.

    Internet-Drafts are draft documents valid for a maximum of six
    months and may be updated, replaced, or obsoleted by other documents
    at any time.  It is inappropriate to use Internet-Drafts as
    reference material or to cite them other than as "work in progress."

    The list of current Internet-Drafts can be accessed at
    http://www.ietf.org/ietf/1id-abstracts.txt.

    The list of Internet-Draft Shadow Directories can be accessed at
    http://www.ietf.org/shadow.html.

    This Internet-Draft expires in January 2011.
Copyright Notice

    Copyright (c) 2010 IETF Trust and the persons identified as the
    document authors.  All rights reserved.

    This document is subject to BCP 78 and the IETF Trust's Legal
    Provisions Relating to IETF Documents
    (http://trustee.ietf.org/license-info) in effect on the date of
    publication of this document.  Please review these documents
    carefully, as they describe your rights and restrictions with
    respect to this document.  Code Components extracted from this
    document must include Simplified BSD License text as described in
    Section 4.e of the Trust Legal Provisions and are provided without
    warranty as described in the Simplified BSD License.






Gulbrandsen               Expires December 2010                 [Page 1]


Internet-draft                                                 July 2010


Abstract

    The SEARCH=INTHREAD extension extends the IMAP SEARCH command to
    operate on threads as well as individual messages. Other commands
    which search are implicitly extended. This allows clients to perform
    searches such as "find all threads that mention schemata", rather
    than just "find all single messages that mention schemata".

    The THREAD=REFS extension provides a threading algorithm using
    (almost) only the References header field for use with the IMAP
    THREAD command.


1.  Conventions Used in This Document

    The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
    "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
    document are to be interpreted as described in [RFC2119].

    Formal syntax is defined by [RFC5234].

    Example lines prefaced by "C:" are sent by the client and ones
    prefaced by "S:" by the server. The five characters [...] means that
    something has been elided.


2.  Overview

    This document defines two related extensions.

    The THREAD=REFS extension defined a fairly pure References-based
    (see [RFC5322] section 3.6.4) threading algorithm for use with the
    THREAD command (see [RFC5256]) and with SEARCH=INTHREAD.

    An IMAP server (see [RFC3501]) that supports the THREAD=REFS
    extension MUST announce THREAD=REFS as capabilities. The THREAD=REFS
    extension adds no new commands and responses, only a new thread
    algorithm.

    The SEARCH=INTHREAD extension extends the IMAP SEARCH command to
    operate on threads as well as individual messages. Other commands
    which search are implicitly extended. SEARCH=INTHREAD requires that
    servers implement THREAD=REFS too.

    An IMAP server that supports SEARCH=INTHREAD announces both
    SEARCH=INTHREAD and THREAD=REFS as capabilities. The SEARCH=INTHRAD
    extension adds no new commands and responses, but adds two new
    search-keys, INTHREAD and MESSAGEID, and one search return option,



Gulbrandsen               Expires December 2010                 [Page 2]


Internet-draft                                                 July 2010


    THREAD=REFS.


3.  New Search Keys etc.

    This document defines a new search key which finds all messages in a
    thread where at least one message matches another (specified) search
    key, and a helper which matches a message given its message-id.


3.1. The INTHREAD Search Key

    INTHREAD takes one argument, which is another search key.

    If the argument matches a message, then INTHREAD matches all the
    message in the same thread as that message.

    This command finds all messages in an entire thread concerning the
    meetings where fizzle was discussed:

         C: a UID SEARCH INTHREAD (SUBJECT meeting BODY fizzle)

    This command threads all threads containing at least one message
    from fred@example.com:

         C: a UID THREAD REFS utf-8 INTHREAD FROM <fred@example.com>


3.2. The MESSAGEID Search Key

    The MESSAGEID search key takes a sigle argument, and matches a
    message if that message's message-id is the same as the argument.

    This command finds all in the same thread as
    <432.123.321@example.com>:

         C: a UID SEARCH INTHREAD MESSAGEID
            "<4321.1234.321@example.com>"

    Note that in the past, some message-ids contained needless quoting.
    Up to around 2001, a message might have the following Message-ID:

            Message-ID: <"432.123.321"@example.com>

    A reply might remove the unnecessary quotes:

            References: <432.123.321@example.com>




Gulbrandsen               Expires December 2010                 [Page 3]


Internet-draft                                                 July 2010


    Although such message-id quoting ist still permitted, the author of
    this document has not found evidence of such quoting since 2001.
    This document does not make any recommendation about how to handle
    quoted left-hand-sides.


3.3. The THREAD=* Search Return Option(s)

    The THREAD=* search return options enables the client to select
    which threading algorithm the server uses when processing INTHREAD
    as part of a SEARCH command. If THREAD=* isn't specified, then the
    default for the SEARCH command is THREAD=REFS.

    When the server processes a THREAD command, it uses the algorithm
    specified by the client.

    I can't think of a good example (or use case) for a non-default use
    of this.


4.  The THREAD=REFS Thread Algorithm

    The THREAD=REFS thread algorithm is defined as the part of
    THREAD=REFERENCES (see [RFC5256]) which concerns itself with the
    References, In-Reply-To and Message-ID fields.  THREAD=REFS ignores
    Subject.

    THREAD=REFS sorts threads by the most recent INTERNALDATE in each
    thread, replacing THREAD=REFERENCES step (4). This means that when a
    new message arrives, its thread becomes the latest thread. (Note
    that while threads are sorted by arrival date, messages within a
    thread are sorted by sent date, just as for THREAD=REFERENCES.)

    This document defines THREAD=REFS because THREAD=REFERENCES is too
    inclusive for the INTHREAD search key. For example, independent
    threads that happen to have the same subject field (such as "Agenda
    for Friday's meeting", "Web site updated" or "Message delivery
    failed") are grouped into one thread by THREAD=REFERENCES.

    It is explicitly permitted for the server to persistently store
    threading information, even if this causes the server to return
    different information than it would otherwise. This can happen if
    the first messages in a thread are deleted, for example.


5.  Formal Syntax

    The following syntax specification uses the Augmented Backus-Naur



Gulbrandsen               Expires December 2010                 [Page 4]


Internet-draft                                                 July 2010


    Form (ABNF) notation as specified in [RFC5234]. [RFC3501] defines
    the non-terminals "capability", "search-key" and "string", [RFC4466]
    defines "search-return-opt", [RFC5256] defines "thread-alg".

    Except as noted otherwise, all alphabetic characters are case-
    insensitive.  The use of upper or lower case characters to define
    token strings is for editorial clarity only.  Implementations MUST
    accept these strings in a case-insensitive fashion.

        capability   =/ "SEARCH=INTHREAD" / "THREAD=REFS"

        search-key   =/ "INTHREAD" SP search-key / "MESSAGEID" SP string

        thread-alg   =/ "REFS"

        search-return-opt =/ "THREAD=" thread-alg


6.  Security Considerations

    This document is believed not to have any security implications.


7.  IANA Considerations

    The IANA is requested to add SEARCH=INTHREAD and THREAD=REFS to the
    list of IMAP extensions,
    http://www.iana.org/assignments/imap4-capabilities.


8.  Acknowledgements

    The name THREAD=REFS was suggested by Cyrus Daboo. Dave Cridland,
    Alexey Menikov and particularly Timo Sirainen have helped with the
    document.


9. Normative References

    [RFC2119]  Bradner, "Key words for use in RFCs to Indicate
               Requirement Levels", RFC 2119, Harvard University, March
               1997.

    [RFC3501]  Crispin, "Internet Message Access Protocol - Version
               4rev1", RFC 3501, University of Washington, June 2003.

    [RFC4466]  Melnikov, Daboo, "Collected Extensions to IMAP4 ABNF",
               RFC 4466, Isode Ltd., April 2006.



Gulbrandsen               Expires December 2010                 [Page 5]


Internet-draft                                                 July 2010


    [RFC5234]   Crocker, D. and P. Overell, "Augmented BNF for Syntax
               Specifications: ABNF", RFC 5234, January 2008.

    [RFC5256]  Crispin, Murchison, "INTERNET MESSAGE ACCESS PROTOCOL -
               SORT AND THREAD EXTENSIONS", RFC 5256, Panda Programming,
               June 2008.

    [RFC5322]  Resnick, "Internet Message Format", RFC 5322, Qualcomm,
               October 2008.


10. Author's Address

    Arnt Gulbrandsen
    Schweppermannstr. 8
    D-81671 Muenchen
    Germany

    Email: arnt@gulbrandsen.priv.no
































Gulbrandsen               Expires December 2010                 [Page 6]


Internet-draft                                                 July 2010


          (RFC Editor: Please delete everything after this point)


















































Gulbrandsen               Expires December 2010                 [Page 7]


Internet-draft                                                 July 2010


11. Open Issues

    I removed THREADROOT and THREADLEAF. Put them back in? I didn't
    actually implement them (it's now 14 months since I implemented
    INTHREAD), so I dropped them from the draft now, on the theory that
    the're insufficiently justified.

    I left the THREAD= search return option, but I haven't implemented
    it either. I don't see any use cases for anything other than the
    default. (At the moment there isn't an example, which is really
    another way of saying "no use cases".) I want to drop it.

    It's not clear to me that the MESSAGEID search-key is worth the
    bother. HEADER Message-Id "<foo@bar>" searches for a substring and
    MESSAGEID "<foo@bar>" for a complete message-id. In a sample of a
    half-million recent messages, none of the message-ids contained
    embededded greater-than or less-than signs, so it's hard to imagine
    any practical effects of treating the two searches identically.


12. Changes since -00

    - The IANA asked me to specify the IANA registry exactly

    - Boilerplate updates - IETF Trust and so on.


Changes since -01

    - Added THREADROOT, THREADLEAF and MESSAGEID

    - Fixed the typo


Changes since -02

    - Specified thread algorithm per-command, generally using a search
      return option.

    - Defined THREADROOT and THREADLEAF robustly.

    - Required that the server implement THREAD=REFS if it implements
      SEARCH=INTHREAD.

    - Use In-Reply-To as THREAD=REFERENCES, since Timo prefers that and
      I don't mind.

    - Use Date as T=R does. Hm? Good idea?



Gulbrandsen               Expires December 2010                 [Page 8]


Internet-draft                                                 July 2010


Changes since -03

    - Boilerplate updates for 5377 and blah


Changes since -03

    - Sort threads by the most recent date in each thread, so that new
      messages arriving makes a thread new again.


Changes since d-g-i-i-04

    - Define "most recent thread" by arrival date, not sender date.
      Suits typical client use better. When reading a thread, you want
      to read messages as ordered by the senders, but the most recent
      thread should be the one which arrived in your mailbox most
      recently.

    - Rename to be a WG draft.


Changes since -00

    - I had a bit of an SCM disaster with my laptop, desktop and git. I
      hope I resolved it well. My apologies if dropped something.

    - Better wording for the INTHREAD search key

    - Message-id turned into an IMAP string.

    - Elaborated a little on message-id equality. The text leaves it up
      to the server whether it will normalize. (The last program to
      generate quotes in message-ids was, AFAICT, procmail/formail, and
      it quit around 2001. The changelog does not say why. I asked
      Philip and he can't remember either. Up to 2001 some respondents
      normalized procmail's message-ids and some (most?)  didn't.)

    - Remove THREADROOT and THREADLEAF. Note my desire to remove THREAD=
      and perhaps MESSAGEID.











Gulbrandsen               Expires December 2010                 [Page 9]


Html markup produced by rfcmarkup 1.124, available from https://tools.ietf.org/tools/rfcmarkup/