[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-cetin-mpls-fastreroute-mib) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 RFC 6445

Network Working Group                                         Riza Cetin
Internet Draft                                        Stefaan De Cnodder
Expiration Date: September 2004                                   Alcatel

                                                              Der-Hwa Gan
                                                   Juniper Networks, Inc.

                                                         Thomas D. Nadeau
                                                      Cisco Systems, Inc.

                                                            February 2004



    Multiprotocol Label Switching (MPLS) Traffic Engineering Management
                     Information Base for Fast Reroute

                  draft-ietf-mpls-fastreroute-mib-02.txt



    Status of this Memo

    This document is an Internet-Draft and is in full conformance with
    all provisions of Section 10 of RFC2026 [1].

    Internet-Drafts are working documents of the Internet Engineering
    Task Force (IETF), its areas, and its working groups. Note that other
    groups may also distribute working documents as Internet-Drafts.
    Internet-Drafts are draft documents valid for a maximum of six months
    and may be updated, replaced, or obsoleted by other documents at any
    time. It is inappropriate to use Internet- Drafts as reference
    material or to cite them other than as "work in progress."

    The list of current Internet-Drafts can be accessed at
    http://www.ietf.org/ietf/1id-abstracts.txt
    The list of Internet-Draft Shadow Directories can be accessed at
    http://www.ietf.org/shadow.html.


1. Abstract

    This memo defines a portion of the Management Information Base (MIB)
    for use with network management protocols in the Internet community.
    In particular, it describes managed objects for Multiprotocol Label
    Switching (MPLS) based fast rerouting.

2. Table of Contents


1. ABSTRACT...................................................1
2. TABLE OF CONTENTS..........................................1
3. CONVENTIONS USED IN THIS DOCUMENT..........................2
4. INTRODUCTION...............................................3
5. BRIEF DESCRIPTION OF MIB OBJECTS...........................3
5.1. MPLSFRRCONSTTABLE........................................3
5.2. MPLSFRRPLRTABLE..........................................3
5.3. MPLSFRRDETOURTABLE.......................................3
6. MPLS FAST REROUTE MIB DEFINITIONS..........................4
7. SECURITY CONSIDERATIONS...................................29
8. REFERENCEAS...............................................29
9. ACKNOWLEDGMENTS...........................................30
10. Intellectual Property Considerations.....................30
11. AUTHORSË ADDRESSES.......................................30
12. FULL COPYRIGHT STATEMENT.................................30


3. Conventions used in this document

    The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
    "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
    document are to be interpreted as described in RFC-2119 [2].

4. Introduction

    This memo defines a portion of the Management Information Base (MIB)
    for use with network management protocols in the Internet community.
    In particular, it describes managed objects for Multiprotocol Label
    Switching (MPLS) based fast rerouting. This MIB should be used in
    conjunction with [3] and [4].

5. Brief Description of MIB Objects.

    The objects described in this section support the detour
    functionality described in Section 3 of [5].

5.1. mplsFrrConstTable

    This table contains fast-reroute constraints such as setup and
    holding priorities and bandwidth for a tunnel instance to be
    protected by using backup LSPs (detour LSPs or by-pass tunnels).

    This table is used at the ingress node of the protected tunnel
    instance to configure backup LSP setup constraints.

5.2. mplsFrrPLRTable

    The mplsFrrPLRTable is an optional table that contains lists of PLRs
    that initiated detour LSPs to protect tunnel instances.

    When detour LSPs initiated by different PLRs to protect the same
    tunnel instance, are merged together before entering an LSR then at
    this LSR, entries of those PLRs point to the same detour LSP entry in
    the mplsFrrDetourTable.

5.3. mplsFrrDetourTable

    The mplsFrrDetourTable shows the detour LSPs in each node (ingress,
    transit and egress nodes). An entry of this table represents a detour
    LSP.

    Each detour is identified by:

    - tunnel index:
      set to the tunnel-id of an LSP protected by a detour.

    - tunnel instance: consists of two parts

      1) lower 16 bits:  - protected tunnel instance
                         - uniquely identifies a protected LSP within
                           a tunnel.
      2) higher 16 bits: - detour instance
                         - uniquely identifies a detour LSP of a protected
                           tunnel instance.

                           Multiple detours of the same protected LSP may go
                           through the same node. In this case, higher 16 bits
                           of the tunnel instance object is used as a detour
                           instance.

    - ingress node:
      set to the ingress node of an LSP protected by a detour.

    - egress node:
      set to the egress node of an LSP protected by a detour.

    A detour LSP is also considered as an instance of a protected tunnel.
    Therefore, each detour LSP will have an entry in the mplsTunnelTable (defined
    in the MPLS-TE-MIB).

    In the mplsTunnelTable, higher 16 bits of the tunnel instance will be used
    as detour instance. Note that for the protected tunnel instances, higher 16 bits
    of the tunnel instance must be all zeros.

    This table is optional and is only required in case mplsFrrPLRTable
    is supported.

5.4. mplsFrrTunnelARHopTable

    This table extends mplsTunnelARHop table (defined in the MPLS-TE MIB)
    with fast-reroute objects which specifies the status of local
    protection (availability and in-use) per hop traversed by a protected
    tunnel.

    The support of this table is optional since not all MPLS signalling
    protocols may support mplsTunnelARHopTable.

    ED NOTE: Need to add description of Facility-based FRR tables
    and explanation of new MIB structure.

6. MPLS Fast Reroute MIB Definitions


MPLS-FRR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE,
       Integer32, Unsigned32, Counter32,
       NOTIFICATION-TYPE, experimental
          FROM SNMPv2-SMI
       MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
          FROM SNMPv2-CONF
       TEXTUAL-CONVENTION, TruthValue, RowStatus,
       TimeStamp
          FROM SNMPv2-TC
       InterfaceIndex, InterfaceIndexOrZero
          FROM IF-MIB
       MplsTunnelIndex, MplsTunnelInstanceIndex,
       MplsTunnelAffinity, MplsLsrIdentifier
          FROM MPLS-TC-MIB
       InetAddressType, InetAddress
          FROM INET-ADDRESS-MIB
       ;

    mplsFrrMIB MODULE-IDENTITY
       LAST-UPDATED
          "200211011200Z" -- 01 November 2002 12:00:00 GMT
       ORGANIZATION
          "Multiprotocol Label Switching (MPLS) Working Group"
       CONTACT-INFO
            "
                     Riza Cetin
             Postal: Alcatel
                     Francis Wellesplein 1
                     B-2018 Antwerp, Belgium
             Tel:    +32-3-2404735
             Email:  riza.cetin@alcatel.be

                     Stefaan De Cnodder
             Postal: Alcatel
                     Francis Wellesplein 1
                     B-2018 Antwerp, Belgium
             Tel:    +32-3-2408515
             Email:  Stefaan.de_cnodder@alcatel.be

                     Der-Hwa Gan
             Postal: Juniper Networks, Inc.
                     1194 N. Mathilda Avenue
                     Sunnyvale, CA 94089
             Tel:    +1-408-745-20-74
             Email:  dhg@juniper.net

                     Thomas D. Nadeau
             Postal: Cisco Systems, Inc.
                     250 Apollo Drive
                     Chelmsford, MA 01924
             Tel:    +1-978-244-3051
             Email:  tnadeau@cisco.com

            "
       DESCRIPTION
         "This MIB module contains managed object definitions for MPLS
          Fast Reroute (FRR) as defined in:Pan, P., Gan, D., Swallow, G.,
          Vasseur, J.Ph., Cooper, D., Atlas, A., Jork, M., Fast Reroute
          Techniques in RSVP-TE, draft-ietf-mpls-rsvp-lsp-fastreroute-
          00.txt, January 2002."

    -- Revision history.
       REVISION
            "200211011200Z" -- 01 November 2002 12:00:00 GMT
       DESCRIPTION
            "Added support for Facility-based FRR.

             Removed tables that were redundant with
               other MPLS MIBs.

             Assigned experimental.120."

       REVISION
            "200203221200Z" -- 18 April 2002 12:00:00 GMT
       DESCRIPTION
            "Initial draft version."

       ::= { experimental 120 } -- to be assigned under mplsMIB.

    -- End of MPLS Fast Reroute textual-conventions.

    -- Top level components of this MIB.
    mplsFrrNotif         OBJECT IDENTIFIER ::= { mplsFrrMIB 0 }
    mplsFrrScalars       OBJECT IDENTIFIER ::= { mplsFrrMIB 1 }
    mplsFrrObjects       OBJECT IDENTIFIER ::= { mplsFrrMIB 2 }

    -- objects that work for either method of FRR
    mplsFrrGeneralObjects OBJECT IDENTIFIER ::= { mplsFrrObjects 1 }

    -- objects defined for 1-to-1 style FRR
    mplsFrr1to1Objects   OBJECT IDENTIFIER ::= { mplsFrrObjects 2 }

    -- objects defined for Facility Backup style FRR
    mplsFrrFacObjects    OBJECT IDENTIFIER ::= { mplsFrrObjects 3 }

    --
    -- Ed Note: need to define two conformance statements: one for
    -- one for 1-2-1 and for Facility.  Might need separate ones for
    -- read-only vs. read-write too.  There is currently just a single
    -- conformance statement due to time constraints.
    --
    mplsFrrConformance   OBJECT IDENTIFIER ::= { mplsFrrMIB 3 }

    -- MPLS Fast Reroute scalars.

    mplsFrrDetourIncoming OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "The number of detour LSPs entering the device if
         mplsFrrConstProtectionMethod is set to oneToOneBackup(1),
         or 0 if mplsFrrConstProtectionMethod is set to
         facilityBackup(2)."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 1 }

    mplsFrrDetourOutgoing OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "The number of detour LSPs leaving the device if
         mplsFrrConstProtectionMethod is set to oneToOneBackup(1), or
         0 if mplsFrrConstProtectionMethod is set to
         facilityBackup(2)."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 2 }

    mplsFrrDetourOriginating OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "The number of detour LSPs originating at this PLR if
         mplsFrrConstProtectionMethod is set to oneToOneBackup(1).
         This object MUST return 0 if the mplsFrrConstProtectionMethod
         is set to facilityBackup(2)."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 3 }

    mplsFrrSwitchover OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "The number of tunnel instances that are switched over to their
         corresponding detour LSP if mplsFrrConstProtectionMethod is set
         to oneToOneBackup(1), or tunnel instances being switched over if
         mplsFrrConstProtectionMethod is set to facilityBackup(2)."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 4 }

    mplsFrrConfIfs OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates the number of MPLS interfaces configured for
          protection by the FRR feature, otherwise this value
          MUST return 0 to indicate that LSPs traversing any
          interface may be protected."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 5 }

    mplsFrrActProtectedIfs OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates the number of interfaces currently being protected
          by the FRR feature if mplsFrrConstProtectionMethod is set to
          facilityBackup(2), otherwise this value should return 0 to
          indicate that LSPs traversing any interface may be protected.
          This value MUST be less than or equal to mplsFrrConfIfs."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 6 }

    mplsFrrConfProtectedTuns OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates the number of bypass tunnels configured to
          protect facilities on this LSR using the FRR feature
          if mplsFrrConstProtectionMethod is set to
          facilityBackup(2), otherwise this value MUST return
          0."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 7 }

    mplsFrrActProtectedTuns OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates the number of bypass tunnels indicated in
          mplsFrrConfProtectedTuns whose operStatus
          is up(1) indicating that they are currently protecting
          facilities on this LSR using the FRR feature. This
          object MUST return 0 if mplsFrrConstProtectionMethod
          is set to oneToOneBackup(1)."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 8 }

    mplsFrrActivelyProtectedLSPs OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates the number of LSPs currently protected by
          the FRR feature. If mplsFrrConstProtectionMethod is set
          to oneToOneBackup(1)this object MUST return 0."
       DEFVAL { 0 }
       ::= { mplsFrrScalars 9 }

    mplsFrrConstProtectionMethod OBJECT-TYPE
       SYNTAX        INTEGER { oneToOneBackup(0),
                               facilityBackup(1)
                             }
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
         "Indicates which protection method is to be used for fast
          reroute. Some devices may require a reboot of their routing
          processors if this variable is changed. An agent which
          does not wish to reboot or modify its FRR mode
          MUST return an inconsistentValue error. Please
          consult the device's agent capability statement
          for more details."
       ::= { mplsFrrScalars 10 }

    mplsFrrNotifsEnabled OBJECT-TYPE
        SYNTAX            TruthValue
        MAX-ACCESS        read-write
        STATUS            current
        DESCRIPTION
            "Enables or disables FRR notifications defined in this MIB
            module. Notifications are disabled by default."
        DEFVAL { false }
    ::= { mplsFrrScalars 11 }

    mplsFrrLogTableMaxEntries OBJECT-TYPE
        SYNTAX            Unsigned32
        MAX-ACCESS        read-write
        STATUS            current
        DESCRIPTION
            "Indicates the maximum number of entries allowed in the FRR
             Log table. Agents receiving SETs for values that cannot be
             used must return an inconsistent value error. If a manager
             sets this value to 0, this indicates that no logging should
             take place by the agent.

             If this value is returned as 0, this indicates
             that no additional log entries will be added to the current
             table either because the table has been completely
             filled or logging has been disabled. However, agents
             may wish to not delete existing entries in the log table
             so that managers may review them in the future.

             It is implied that when mplsFrrLogTableCurrEntries
             has reached the value of this variable, that logging
             entries may not continue to be added to the table,
             although existing ones may remain.  Furthermore, an
             agent may begin to delete existing (perhaps the
             oldest entries) entries to make room for new ones."
        DEFVAL { 0 }
    ::= { mplsFrrScalars 12 }

    mplsFrrLogTableCurrEntries OBJECT-TYPE
        SYNTAX            Counter32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "Indicates the current number of entries in the FRR log
            table."
    ::= { mplsFrrScalars 13 }

    mplsFrrNotifMaxRate OBJECT-TYPE
       SYNTAX       Unsigned32
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
           "This variable indicates the number of milliseconds
            that must elapse between notification emissions. If
            events occur more rapidly, the implementation may
            simply fail to emit these notifications during that
            period, or may queue them until an appropriate
            time in the future. A value of 0 means no minimum
            elapsed period is specified."
       DEFVAL       { 0 }
    ::= { mplsFrrScalars 14 }

    --
    --  General FRR Table Section
    --
    --  These tables apply to both types of FRR
    --  and should be implemented by all LSRs supporting
    --  FRR.
    --

    -- MPLS Fast Reroute Constraints table

    mplsFrrConstTable OBJECT-TYPE
       SYNTAX        SEQUENCE OF MplsFrrConstEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "This table shows backup LSP setup constraints."
       ::= {  mplsFrrGeneralObjects 1 }

    mplsFrrConstEntry OBJECT-TYPE
       SYNTAX        MplsFrrConstEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "An entry in this table represents detour LSP or bypass tunnel
          setup constraints for a tunnel instance to be protected by detour
          LSPs or a tunnel.

          Agents must allow entries in this table to be
          created only for tunnel instances that require fast-reroute.
          Entries indexed with mplsFrrConstIfIndex set to 0 apply to all
          interfaces on this device for which the FRR feature can operate
          on."
       INDEX { mplsFrrConstIfIndex,
               mplsFrrConstTunnelIndex,
               mplsFrrConstTunnelInstance
             }
       ::= { mplsFrrConstTable 1 }

    MplsFrrConstEntry ::= SEQUENCE {
          mplsFrrConstIfIndex           InterfaceIndexOrZero,
          mplsFrrConstTunnelIndex       MplsTunnelIndex,
          mplsFrrConstTunnelInstance    MplsTunnelInstanceIndex,
          mplsFrrConstProtectionType    INTEGER,
          mplsFrrConstSetupPrio         Unsigned32,
          mplsFrrConstHoldingPrio       Unsigned32,
          mplsFrrConstInclAnyAffinity   MplsTunnelAffinity,
          mplsFrrConstInclAllAffinity   MplsTunnelAffinity,
          mplsFrrConstExclAnyAffinity   MplsTunnelAffinity,
          mplsFrrConstHopLimit          Unsigned32,
          mplsFrrConstBandwidth         Integer32,
          mplsFrrConstRowStatus         RowStatus
    }

    mplsFrrConstIfIndex  OBJECT-TYPE
       SYNTAX        InterfaceIndexOrZero
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies an interface for which fast reroute is
         configured. Tabular entries indexed with a 0 value apply to all
         interfaces on this device for which the FRR feature can operate
         on."
       ::= { mplsFrrConstEntry 1 }

    mplsFrrConstTunnelIndex OBJECT-TYPE
       SYNTAX        MplsTunnelIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies a tunnel for which fast reroute is
          requested."
       ::= { mplsFrrConstEntry 2 }

    mplsFrrConstTunnelInstance OBJECT-TYPE
       SYNTAX        MplsTunnelInstanceIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies an instance of this tunnel for which fast
          reroute is requested.

         - lower 16 bits : protected tunnel instance
         - higher 16 bits: must be all zeros"
       ::= { mplsFrrConstEntry 3 }

    mplsFrrConstProtectionType OBJECT-TYPE
       SYNTAX        INTEGER { none(0),
                               linkProtection(1),
                               nodeProtection(2)
                             }
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "Indicates type of the resource protection."
       DEFVAL { nodeProtection }
       ::= { mplsFrrConstEntry 4 }

    mplsFrrConstSetupPrio OBJECT-TYPE
       SYNTAX        Unsigned32 (0..7)
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "Indicates the setup priority of detour LSP."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
          RFC 3209, December 2001"
       DEFVAL { 7 }
       ::= { mplsFrrConstEntry 5 }

    mplsFrrConstHoldingPrio OBJECT-TYPE
       SYNTAX        Unsigned32 (0..7)
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "Indicates the holding priority for detour LSP."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
          RFC 3209, December 2001"
       DEFVAL { 0 }
       ::= { mplsFrrConstEntry 6 }

    mplsFrrConstInclAnyAffinity OBJECT-TYPE
       SYNTAX        MplsTunnelAffinity
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "A link satisfies the include-any constraint if and only if the
          constraint is zero, or the link and the constraint have a
          resource class in common."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
          RFC 3209, December 2001."
       DEFVAL { 0 }
       ::= { mplsFrrConstEntry 7 }

    mplsFrrConstInclAllAffinity OBJECT-TYPE
       SYNTAX        MplsTunnelAffinity
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "A link satisfies the include-all constraint if and only if the
          link contains all of the administrative groups specified in the
          constraint."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
          RFC 3209, December 2001."
       DEFVAL { 0 }
       ::= { mplsFrrConstEntry 8 }

    mplsFrrConstExclAnyAffinity OBJECT-TYPE
       SYNTAX        MplsTunnelAffinity
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "A link satisfies the exclude-all constraint if and only if the
          link contains none of the administrative groups specified in the
          constraint."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
          RFC 3209, December 2001."
       DEFVAL { 0 }
       ::= { mplsFrrConstEntry 9 }

    mplsFrrConstHopLimit OBJECT-TYPE
       SYNTAX        Unsigned32 (1..255)
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "The maximum number of hops that the detour LSP may traverse."
       REFERENCE
         "Pan, P., Gan, D., Swallow, G., Vasseur, J.Ph., Cooper, D.,
         Atlas, A., Jork, M., Fast Reroute Techniques in RSVP-TE, draft-
         ietf-mpls-rsvp-lsp-fastreroute-00.txt, January 2002. Work in
         progress."
       DEFVAL { 32 }
    ::= { mplsFrrConstEntry 10 }

    mplsFrrConstBandwidth OBJECT-TYPE
       SYNTAX        Integer32
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "This variable represents the bandwidth for detour LSPs of this
         tunnel, in units of thousands of bits per second (Kbps)."
       DEFVAL { 0 }
       ::= { mplsFrrConstEntry 11 }

    mplsFrrConstRowStatus OBJECT-TYPE
       SYNTAX        RowStatus
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "This object is used to create, modify, and/or delete a row in
          this table."
       ::= { mplsFrrConstEntry 12 }

    -- MPLS Fast Reroute Tunnel Actual Route Hop table

    mplsFrrTunARHopTable  OBJECT-TYPE
       SYNTAX             SEQUENCE OF MplsFrrTunARHopEntry
       MAX-ACCESS         not-accessible
       STATUS             current
       DESCRIPTION
         "This table extends mplsTunnelARHop table defined in the
          MPLS-TE MIB with fast-reroute objects which specifies the status
          of local protection (availability and in-use) per hop traversed
          by a protected tunnel."
       ::= {  mplsFrrGeneralObjects 2 }

    mplsFrrTunARHopEntry  OBJECT-TYPE
       SYNTAX             MplsFrrTunARHopEntry
       MAX-ACCESS         not-accessible
       STATUS             current
       DESCRIPTION
         "This entry contains fast-reroute protection status of a signle
          protected tunnel hop."
       AUGMENTS { mplsTunnelARHopEntry }
       ::= { mplsFrrTunARHopTable 1 }

    mplsFrrTunnARHopEntry    ::= SEQUENCE {
        mplsFrrTunARHopProtectAvailable TruthValue,
        mplsFrrTunARHopProtectInUse     TruthValue,
        mplsFrrTunARHopBandwidthProtect TruthValue,
        mplsFrrTunARHopNodeProtect      TruthValue
    }

    mplsFrrTunARHopProtectAvailable OBJECT-TYPE
       SYNTAX                       TruthValue
       MAX-ACCESS                   read-only
       STATUS                       current
       DESCRIPTION
         "This object indicates whether local protection provided
          by fast-reroute is available at this hop."
       ::= { mplsFrrTunArHopEntry 1 }

    mplsFrrTunARHopProtectInUse     OBJECT-TYPE
       SYNTAX                       TruthValue
       MAX-ACCESS                   read-only
       STATUS                       current
       DESCRIPTION
         "This object indicates whether local protection provided
          by fast-reroute is in use at this hop."
       ::= { mplsFrrTunARHopEntry 2 }

    mplsFrrTunARHopBandwidthProtect OBJECT-TYPE
       SYNTAX                       TruthValue
       MAX-ACCESS                   read-only
       STATUS                       current
       DESCRIPTION
         "This object indicates whether bandwidth protection
          is provided by this hop."
       ::= { mplsFrrTunArHopEntry 3 }

    mplsFrrTunARHopNodeProtect      OBJECT-TYPE
       SYNTAX                       TruthValue
       MAX-ACCESS                   read-only
       STATUS                       current
       DESCRIPTION
         "This object indicates whether node protection
          is provided by this hop."
       ::= { mplsFrrTunArHopEntry 4 }

    -- Fast Reroute Log Table

    mplsFrrLogTable OBJECT-TYPE
        SYNTAX            SEQUENCE OF MplsFrrLogEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "The fast reroute log table records fast reroute events such
             as protected links going up or down or the FRR feature
             kicking in."
    ::= { mplsFrrGeneralObjects 2 }

    mplsFrrLogEntry OBJECT-TYPE
        SYNTAX            MplsFrrLogEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "An entry in this table is created to describe one fast
             reroute event.  Entries in this table are only created and
             destroyed by the agent implementation. The maximum number
             of entries in this log is governed by the scalar."
        INDEX { mplsFrrLogIndex }
    ::= { mplsFrrLogTable 1 }

    MplsFrrLogEntry ::= SEQUENCE {
        mplsFrrLogIndex                Unsigned32,
        mplsFrrLogEventTime            TimeStamp,
        mplsFrrLogInterface            InterfaceIndexOrZero,
        mplsFrrLogEventType            INTEGER,
        mplsFrrLogEventDuration        TimeTicks,
        mplsFrrLogEventReasonString    OCTET STRING
    }

    mplsFrrLogIndex OBJECT-TYPE
        SYNTAX            Unsigned32
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "Uniquely identifies a fast reroute event entry."
    ::= { mplsFrrLogEntry 1 }

    mplsFrrLogEventTime OBJECT-TYPE
        SYNTAX            TimeStamp
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "This object provides the amount of time ticks since this
             event occured."
    ::= { mplsFrrLogEntry 2 }

    mplsFrrLogInterface OBJECT-TYPE
        SYNTAX            InterfaceIndexOrZero
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "This object indicates which interface was affected by this
             FRR event. This value may be set to 0 if
             mplsFrrConstProtectionMethod is set to oneToOneBackup(0)."
    ::= { mplsFrrLogEntry 3 }

    mplsFrrLogEventType OBJECT-TYPE
        SYNTAX    INTEGER {
                           other(1),
                           protected(2)
                          }
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "This object describes what type of fast reroute event
             occured."
    ::= { mplsFrrLogEntry 4 }

    mplsFrrLogEventDuration OBJECT-TYPE
        SYNTAX            TimeTicks
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "This object describes the duration of this event."
    ::= { mplsFrrLogEntry 5 }

    mplsFrrLogEventReasonString OBJECT-TYPE
        SYNTAX            OCTET STRING (SIZE(128))
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "This object contains an implementation-specific explanation
            of the event."
    ::= { mplsFrrLogEntry 6 }


    --
    -- One-to-One Specific Tables
    --
    -- Tables in this section pertain only to the 1-1
    -- style of FRR.
    --


    -- MPLS Fast Reroute Point of Local Repair table

    mplsFrrOne2OnePlrTable  OBJECT-TYPE
       SYNTAX        SEQUENCE OF MplsFrrOne2OnePlrEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "This table shows the lists of PLRs that initiated detour LSPs
         which affect this node."
       ::= { mplsFrr1to1Objects 1 }

    mplsFrrOne2OnePlrEntry  OBJECT-TYPE
       SYNTAX        MplsFrrOne2OnePlrEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "An entry in this table represents a PLR together with its
         detour instance. An entry in this table is only created by an
         SNMP agent as instructed by an MPLS signaling protocol."
       INDEX { mplsFrrOne2OnePlrTunIdx,       -- from MPLS-TE MIB
               mplsFrrOne2OnePlrTunDetourInst,-- mplsTunnelTable
               mplsFrrOne2OnePlrTunIngrLSRId, -- Tunnels must exist
               mplsFrrOne2OnePlrTunEgrLSRId,  -- a priori
               mplsFrrOne2OnePlrId    }
       ::= { mplsFrrOne2OnePlrTable 1 }

    MplsFrrOne2OnePlrEntry ::= SEQUENCE {
          mplsFrrOne2OnePlrTunIdx         MplsTunnelIndex,
          mplsFrrOne2OnePlrTunDetourInst  MplsTunnelInstanceIndex,
          mplsFrrOne2OnePlrTunIngrLSRId   MplsLsrIdentifier,
          mplsFrrOne2OnePlrTunEgrLSRId    MplsLsrIdentifier,
          mplsFrrOne2OnePlrId             MplsLsrIdentifier,
          mplsFrrOne2OnePlrSenderAddrType InetAddressType,
          mplsFrrOne2OnePlrSenderAddr     InetAddress,
          mplsFrrOne2OnePlrAvoidNAddrType InetAddressType,
          mplsFrrOne2OnePlrAvoidNAddr     InetAddress
    }

    mplsFrrOne2OnePlrTunIdx OBJECT-TYPE
       SYNTAX        MplsTunnelIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies a tunnel between a pair of LSRs
          from the mplsTunnelEntry."
       ::= { mplsFrrOne2OnePlrEntry 1 }

    mplsFrrOne2OnePlrTunDetourInst OBJECT-TYPE
       SYNTAX        MplsTunnelInstanceIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies a detour instance of a tunnel from
          the mplsTunnelEntry.

         - lower 16 bits : protected tunnel instance
         - higher 16 bits: detour instance"
       ::= { mplsFrrOne2OnePlrEntry 2 }

    mplsFrrOne2OnePlrTunIngrLSRId OBJECT-TYPE
       SYNTAX        MplsLsrIdentifier
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "The purpose of this object is to uniquely identity a
           tunnel within a network. When the MPLS signalling
           protocol is rsvp(2) this value SHOULD mimic the
           Extended Tunnel Id field in the SESSION object.
           When the MPLS signalling protocol is crldp(3) this
           value SHOULD mimic the Ingress LSR Router ID field
           in the LSPID TLV object."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
           Awduche et al, RFC 3209, December 2001
          2. Constraint-Based LSP Setup using LDP, Jamoussi
           (Editor), RFC 3212, January 2002"
       ::= { mplsFrrOne2OnePlrEntry 3 }

     mplsFrrOne2OnePlrTunEgrLSRId OBJECT-TYPE
       SYNTAX        MplsLsrIdentifier
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Specifies the egress LSR ID."
       ::= { mplsFrrOne2OnePlrEntry 4 }


    mplsFrrOne2OnePlrId OBJECT-TYPE
       SYNTAX        MplsLsrIdentifier
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "This value represents the PLR that has initiated a detour LSP
         to protect a tunnel instance."
       ::= { mplsFrrOne2OnePlrEntry 5 }

    mplsFrrOne2OnePlrSenderAddrType OBJECT-TYPE
       SYNTAX        InetAddressType
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "Denotes the address type of this detour instance's sender
         address."
       DEFVAL        { ipv4 }
       ::= { mplsFrrOne2OnePlrEntry 6 }

    mplsFrrOne2OnePlrSenderAddr OBJECT-TYPE
       SYNTAX        InetAddress
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
         "If mplsFrrOne2OnePlrSenderAddrType is set to ipv4(1), then this value
         will contain the IPv4 address of this detour instance's sender.
         This object is otherwise insignificant and should contain a
         value of 0."
       ::= { mplsFrrOne2OnePlrEntry 7 }

    mplsFrrOne2OnePlrAvoidNAddrType OBJECT-TYPE
       SYNTAX        InetAddressType
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Denotes the address type of the node that this PLR tries to
         avoid."
       DEFVAL        { ipv4 }
       ::= { mplsFrrOne2OnePlrEntry 8 }

    mplsFrrOne2OnePlrAvoidNAddr OBJECT-TYPE
       SYNTAX        InetAddress
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "If mplsFrrOne2OnePlrAvoidNAddrType is set to ipv4(1), then this
         value will contain the IPv4 address of the avoid node. This
         object is otherwise insignificant and should contain a value of
         0."
       ::= { mplsFrrOne2OnePlrEntry 9 }

    -- MPLS One-To-One Fast Reroute Detour table.

    mplsFrrDetourTable OBJECT-TYPE
       SYNTAX        SEQUENCE OF MplsFrrDetourEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "This table shows detour LSPs."
       ::= { mplsFrr1to1Objects 2 }

    mplsFrrDetourEntry OBJECT-TYPE
       SYNTAX        MplsFrrDetourEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "An entry in this table represents a detour. An entry in this
         table is only created by an SNMP agent as instructed by an MPLS
         signaling protocol. "
       INDEX {
               mplsFrrOne2OnePlrTunIdx,        -- from MPLS-TE MIB
               mplsFrrOne2OnePlrTunDetourInst, -- mplsTunnelTable
               mplsFrrOne2OnePlrTunIngrLSRId,  -- Tunnels must exist
               mplsFrrOne2OnePlrTunEgrLSRId,   -- a priori
          }
       ::= { mplsFrrDetourTable 1 }

    MplsFrrDetourEntry ::= SEQUENCE {
          mplsFrrDetourActive             TruthValue,
          mplsFrrDetourMerging            INTEGER,
          mplsFrrDetourMergedDetourInst   MplsTunnelInstanceIndex
    }

    mplsFrrDetourActive OBJECT-TYPE
       SYNTAX        TruthValue
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "Indicates whether or not the main LSP has switched over to this
         detour LSP. This is only relevant for detours originated by
         this node."
       ::= { mplsFrrDetourEntry 1 }

    mplsFrrDetourMerging OBJECT-TYPE
       SYNTAX        INTEGER { none(0),
                               protectedTunnel(1),
                               detour(2)
                             }
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "This value represents whether or not this detour is merged.
         This value MUST be set to none(0) if this detour is not merged.
         This value MUST be set to protectedTunnel(1) if this detour is
         merged with the protected tunnel. This value MUST be set to
         detour(2) if this detour is merged with another detour
         protecting the same tunnel."
       ::= { mplsFrrDetourEntry 2 }

    mplsFrrDetourMergedDetourInst OBJECT-TYPE
       SYNTAX        MplsTunnelInstanceIndex
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
         "This value represents the instance of the detour with which
         this detour is merged. This object is only valid when
         mplsFrrDetourMerging is set to detour(2).

         - lower 16 bits : protected tunnel instance
         - higher 16 bits: detour instance"
       ::= { mplsFrrDetourEntry 3 }

    --
    -- Facility-based FRR-specific Tables
    --

    mplsFrrFacRouteDBTable OBJECT-TYPE
        SYNTAX            SEQUENCE OF MplsFrrFacRouteDBEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "The mplsFrrDBTable provides information about the fast
            reroute database.  Each entry belongs to an interface,
            protecting backup tunnel and protected tunnel. MPLS
            interfaces defined on this node are protected by backup
            tunnels and are indexed by mplsInterfaceConfIndex. Backup
            tunnels defined to protect the tunnels traversing an
            interface, and are indexed by mplsTunnelIndex. Note that the
            tunnel instance index is not required, since it is implied
            to be 0, which indicates the tunnel head interface for the
            protecting tunnel. The protecting tunnel is defined to exist
            on the PLR in the FRR specification.  Protected tunnels are
            the LSPs that traverse the protected link.  These LSPs are
            uniquely identified by mplsTunnelIndex, mplsTunnelInstance,
            mplsTunnelIngressLSRId, and mplsTunnelEgressLSRId."
        REFERENCE
            "Srinivansan, C., and A. Viswanathan, T. Nadeau, MPLS Traffic
            Engineering Management Information Base Using SMIv2,
             draft-ietf-mpls-te-mib-06.txt "

    ::= { mplsFrrFacObjects 1 }


    mplsFrrFacRouteDBEntry OBJECT-TYPE
        SYNTAX            MplsFrrFacRouteDBEntry
        MAX-ACCESS        not-accessible
        STATUS            current
        DESCRIPTION
            "An entry in the mplsFrrDBTable represents a single protected
            LSP, protected by a backup tunnel and defined for a specific
            protected interface. Note that for brevity, managers should
            consult the mplsTunnelTable present in the MPLS-TE MIB for
            additional information about the protecting and protected
            tunnels, and the ifEntry in the IF-MIB for the protected
            interface."
        REFERENCE
            "Srinivansan, C., and A. Viswanathan, T. Nadeau, MPLS Label
             Switch Router Management Information Base Using SMIv2,
             draft-ietf-mpls-lsr-mib-07.txt Srinivansan, C., and A.
             Viswanathan, T. Nadeau, MPLS Traffic Engineering Management
             Information Base Using SMIv2, draft-ietf-mpls-te-mib-
             06.txt."
        INDEX {
                mplsFrrFacRouteProtIfIdx,       -- from MPLS-TE MIB
                mplsFrrFacRouteProtTunIdx,      -- from MPLS-TE MIB

                mplsFrrFacRouteBkupTunIdx,      -- from MPLS-TE MIB
                mplsFrrFacRouteBkupTunInst,     -- mplsTunnelTable
                mplsFrrFacRouteBkupTunIngrLSRId, -- Tunnels must exist
                mplsFrrFacRouteBkupTunEgrLSRId }  -- a priori
    ::= { mplsFrrFacRouteDBTable 1 }

    MplsFrrFacRouteDBEntry ::= SEQUENCE {
        mplsFrrFacRouteProtIfIdx          InterfaceIndex,
        mplsFrrFacRouteProtTunIdx         MplsTunnelIndex,
        mplsFrrFacRouteBkupTunIdx         MplsTunnelIndex,
        mplsFrrFacRouteBkupTunInst        MplsTunnelInstanceIndex,
        mplsFrrFacRouteBkupTunIngrLSRId   MplsLsrIdentifier,
        mplsFrrFacRouteBkupTunEgrLSRId    MplsLsrIdentifier,
        mplsFrrFacRouteDBNumProtTunOnIf   Gauge32,
        mplsFrrFacRouteDBNumProtTun       Gauge32,
        mplsFrrFacRouteDBProtTunStatus    INTEGER,
        mplsFrrFacRouteDBProtTunResvBw    Unsigned32
    }

    mplsFrrFacRouteProtIfIdx OBJECT-TYPE
       SYNTAX        InterfaceIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies the interface configured for FRR protection."
      ::= { mplsFrrFacRouteDBEntry 1 }

    mplsFrrFacRouteProtTunIdx OBJECT-TYPE
       SYNTAX        MplsTunnelIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies the mplsTunnelEntry primary index for
          the tunnel head interface designated to protect the
          interface as specified in the mplsFrrFacRouteIfProtIdx
          (and all of the tunnels using this interface)."
       ::= { mplsFrrFacRouteDBEntry 2 }

    mplsFrrFacRouteBkupTunIdx OBJECT-TYPE
       SYNTAX        MplsTunnelIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
        "Uniquely identifies an mplsTunnelEntry that is
          being protected by FRR."
       ::= { mplsFrrFacRouteDBEntry 3 }

    mplsFrrFacRouteBkupTunInst OBJECT-TYPE
       SYNTAX        MplsTunnelInstanceIndex
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies an mplsTunnelEntry that is
          being protected by FRR."
       ::= { mplsFrrFacRouteDBEntry 4 }

    mplsFrrFacRouteBkupTunIngrLSRId OBJECT-TYPE
       SYNTAX        MplsLsrIdentifier
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies an mplsTunnelEntry that is
          being protected by FRR."
       REFERENCE
         "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
           Awduche et al, RFC 3209, December 2001
          2. Constraint-Based LSP Setup using LDP, Jamoussi
           (Editor), RFC 3212, January 2002"
       ::= { mplsFrrFacRouteDBEntry 5 }

    mplsFrrFacRouteBkupTunEgrLSRId  OBJECT-TYPE
       SYNTAX        MplsLsrIdentifier
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
         "Uniquely identifies an mplsTunnelEntry that is
          being protected by FRR."
       ::= { mplsFrrFacRouteDBEntry 6 }

    mplsFrrFacRouteDBNumProtTunOnIf OBJECT-TYPE
        SYNTAX            Gauge32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "The number of backup tunnels protecting the specified
            interface."
       ::= { mplsFrrFacRouteDBEntry 7 }

    mplsFrrFacRouteDBNumProtTun OBJECT-TYPE
        SYNTAX            Gauge32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "The number of tunnels protected on this interface."
    ::= { mplsFrrFacRouteDBEntry 8 }

    mplsFrrFacRouteDBProtTunStatus OBJECT-TYPE
        SYNTAX            INTEGER {
                              active(1),
                              ready(2),
                              partial(3)
                          }
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "Specifies the state of the protected tunnel.

             active  This tunnel's label has been placed in the
                      LFIB and is ready to be applied to incoming
                      packets.

             ready -  This tunnel's label entry has been created but is
                      not yet in the LFIB.

             partial - This tunnel's label entry as not been fully
                       created."
    ::= { mplsFrrFacRouteDBEntry 9 }

    mplsFrrFacRouteDBProtTunResvBw  OBJECT-TYPE
        SYNTAX            Unsigned32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
            "Specifies the amount of bandwidth in megabytes per second
             that is actually reserved by the protection tunnel for
             facility backup. This value is repeated here from the MPLS-
             TE MIB because the tunnel entry will reveal the bandwidth
             reserved by the signaling protocol, which is typically 0
             for backup tunnels so as to not over-book bandwidth.
             However, internal reservations are typically made on the
             PLR, thus this value should be revealed here."
     ::= { mplsFrrFacRouteDBEntry 10 }

    -- Notifications

    -- Ed Note: Currently these notifications only apply to
    --          Facility-based FRR. Do we need to define
    --          additional notifications for One2One?

    mplsFrrProtected NOTIFICATION-TYPE
        OBJECTS { mplsFrrFacRouteDBNumProtTunOnIf,
                  mplsFrrFacRouteDBNumProtTun,
                  mplsFrrFacRouteDBProtTunStatus,
                  mplsFrrFacRouteDBProtTunResvBw
                }
    STATUS      current
    DESCRIPTION
        "This notification is generated when a tunnel running over an
         interface as specified in the mplsFrrConstTable is initially
         protected by the backup tunnel also specified in the
         mplsFrrConstTable. This notification should not be generated
         for each subsequent tunnel that is backed up by the FRR feature
         on this LSR, as this may result in potential scaling issues
         with regard to LSR performance and network loading. Note also
         that notifications MUST be generated in accordance with the
         mplsFrrNotifMaxRate."
        ::= { mplsFrrNotif 1 }

    mplsFrrUnProtected NOTIFICATION-TYPE
        OBJECTS { mplsFrrFacRouteDBNumProtTunOnIf,
                  mplsFrrFacRouteDBNumProtTun,
                  mplsFrrFacRouteDBProtTunStatus,
                  mplsFrrFacRouteDBProtTunResvBw
                }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the final tunnel that is
         being protected by a backup tunnel as specified in the
         mplsFrrConstTable is restored to normal operation. This
         notification should not be generated for each restored tunnel,
         as this may result in potential scaling issues with regard to
         LSR performance and network loading. Note also that
         notifications MUST be generated in accordance with the
         mplsFrrNotifMaxRate."
        ::= { mplsFrrNotif 2 }


    -- Module Conformance Statement

    mplsFrrGroups
       OBJECT IDENTIFIER ::= {mplsFrrConformance 1 }

    mplsFrrCompliances
       OBJECT IDENTIFIER ::= {mplsFrrConformance 2 }

    mplsFrrModuleCompliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION
         "Compliance statements for agents that support the MPLS FRR
         MIB."
       MODULE
           MANDATORY-GROUPS {
                             mplsFrrScalarGroup,
                             mplsFrrConstGroup,
                             mplsFrrLogGroup
                            }

       GROUP mplsFrrTunARHopGroup
       DESCRIPTION
           "Objects that are required to present per hop
            fast-reroute protection status."

       GROUP mplsFrrOne2OnePLRDetourGroup
       DESCRIPTION
           "This group is mandatory for devices which support
            the one-to-one FRR mechanism, and is optional for
            those which do not."

       GROUP mplsFrrOne2OnePlrGroup
       DESCRIPTION
           "This group is mandatory for devices which support
            the one-to-one FRR mechanism, and is optional for
            those which do not."

       GROUP mplsFrrFacRouteDBGroup
       DESCRIPTION
           "This group is mandatory for devices which support
            the Facility Backup FRR mechanism, and is optional
            for those which do not."

       GROUP mplsFrrNotifGroup
       DESCRIPTION
           "This group is mandatory for devices which support
            the Facility Backup FRR mechanism, and is optional
            for those which do not."

       -- mplsFrrConstTable

       OBJECT        mplsFrrConstProtectionMethod
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstProtectionType
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstSetupPrio
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstHoldingPrio
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstInclAnyAffinity
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstInclAllAffinity
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstExclAllAffinity
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstHopLimit
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstBandwidth
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       OBJECT        mplsFrrConstRowStatus
       MIN-ACCESS    read-only
       DESCRIPTION
         "Write access is not required."

       ::= { mplsFrrCompliances 1 }

    -- Units of conformance

    mplsFrrScalarGroup OBJECT-GROUP
       OBJECTS {
                mplsFrrDetourIncoming,
                mplsFrrDetourOutgoing,
                mplsFrrDetourOriginating,
                mplsFrrSwitchover,
                mplsFrrConfIfs,
                mplsFrrActProtectedIfs,
                mplsFrrConfProtectedTuns,
                mplsFrrActProtectedTuns,
                mplsFrrActivelyProtectedLSPs,
                mplsFrrConstProtectionMethod,
                mplsFrrNotifsEnabled,
                mplsFrrLogTableMaxEntries,
                mplsFrrLogTableCurrEntries,
                mplsFrrNotifMaxRate
               }
       STATUS        current
       DESCRIPTION
         "Objects that are required to gather fast reroute statistics."
       ::= { mplsFrrGroups 1 }

    mplsFrrConstGroup OBJECT-GROUP
       OBJECTS {
          mplsFrrConstProtectionMethod,
          mplsFrrConstProtectionType,
          mplsFrrConstSetupPrio,
          mplsFrrConstHoldingPrio,
          mplsFrrConstInclAnyAffinity,
          mplsFrrConstInclAllAffinity,
          mplsFrrConstExclAllAffinity,
          mplsFrrConstHopLimit,
          mplsFrrConstBandwidth,
          mplsFrrConstRowStatus
       }
       STATUS        current
       DESCRIPTION
         "Objects that are required to configure fast reroute constraints
         at the ingress LSR of the tunnel that requires fast reroute
         service."
       ::= { mplsFrrGroups 2 }

    mplsFrrTunARHopGroup         OBJECT-GROUP
     OBJECTS {
              mplsFrrTunARHopProtectAvailable,
              mplsFrrTunARHopProtectInUse,
              mplsFrrTunARHopBandwidthProtect,
              mplsFrrTunARHopNodeProtect
             }
     STATUS        current
     DESCRIPTION
         "Objects that are required to present per hop fast-reroute
          protection status."
    ::= { mplsFrrGroups 3}

    mplsFrrOne2OnePLRDetourGroup OBJECT-GROUP
     OBJECTS {
              mplsFrrDetourActive,
              mplsFrrDetourMerging,
              mplsFrrDetourMergedDetourInst
             }
     STATUS        current
     DESCRIPTION
         "Objects that are required to present the detour LSP information
         at the detour ingress, transit and egress LSRs."
     ::= { mplsFrrGroups 4 }

    mplsFrrLogGroup OBJECT-GROUP
    OBJECTS { mplsFrrLogEventTime,
              mplsFrrLogInterface,
              mplsFrrLogEventType,
              mplsFrrLogEventDuration,
              mplsFrrLogEventReasonString
            }
    STATUS        current
    DESCRIPTION
       "Objects that are required to represent FRR logging information
       at the detour ingress, transit and egress LSRs."
    ::= { mplsFrrGroups 5 }

    mplsFrrOne2OnePlrGroup OBJECT-GROUP
      OBJECTS {
          mplsFrrOne2OnePlrSenderAddrType,
          mplsFrrOne2OnePlrSenderAddr,
          mplsFrrOne2OnePlrAvoidNAddrType,
          mplsFrrOne2OnePlrAvoidNAddr
         }
    STATUS        current
    DESCRIPTION
       "Objects that are required to represent the FRR
        One-2-One PLR information."
    ::= { mplsFrrGroups 6 }

    mplsFrrFacRouteDBGroup OBJECT-GROUP
      OBJECTS { mplsFrrFacRouteDBNumProtTunOnIf,
                mplsFrrFacRouteDBNumProtTun,
                mplsFrrFacRouteDBProtTunStatus,
                mplsFrrFacRouteDBProtTunResvBw
        }
    STATUS        current
    DESCRIPTION
       "Objects that are required to represent the FRR
        Facility Route Database information."
    ::= { mplsFrrGroups 7 }

    mplsFrrNotifGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
                    mplsFrrProtected,
                    mplsFrrUnProtected
                  }
    STATUS        current
    DESCRIPTION
         "Objects that are required to represent FRR notifications."
    ::= { mplsFrrGroups 8 }

    END


7. Security Considerations

    This MIB does not pose any additional security issues compared with
    [3] and [4].

8. References

    [1]Bradner, S., "The Internet Standards Process -- Revision 3", BCP
       9, RFC 2026, October 1996.

    [2]Bradner, S., "Key words for use in RFCs to Indicate Requirement
       Levels", BCP 14, RFC 2119, March 1997.

    [3]Srinivasan, C., Viswanathan, A. and T. Nadeau, "Multiprotocol
       Label Switching (MPLS) Traffic Engineering Management Information
       Base", Internet Draft <draft-ietf-mpls-te-mib-08.txt, January
       2002. Work in progress.

    [4]Srinivasan, C., Viswanathan, A. and T. Nadeau, "MPLS Label Switch
       Router Management Information Base ", Internet Draft <draft-ietf-
       mpls-lsr-mib-08.txt, January 2002. Work in progress.

    [5]Pan, P., Gan, D., Swallow, G., Vasseur, J.Ph., Cooper, D., Atlas,
       A., Jork, M., Fast Reroute Techniques in RSVP-TE, draft-ietf-mpls-
       rsvp-lsp-fastreroute-00.txt, January 2002. Work in progress.

9. Acknowledgments

    We would like to thank Alia Atlas, Yeong Tai and Walter Vanhimbeeck,
    Mike Piecuch and Adrien Grise for the helpful discussions and
    contributions to this document.

10. Intellectual Property Considerations

    The IETF takes no position regarding the validity or scope of any
    intellectual property or other rights that might be claimed to per-
    tain to the implementation or use of the technology described in this
    document or the extent to which any license under such rights might
    or might not be available; neither does it represent that it has made
    any effort to identify any such rights.  Information on the IETF's
    procedures with respect to rights in standards-track and standards-
    related documentation can be found in BCP-11.  Copies of claims of
    rights made available for publication and any assurances of licenses
    to be made available, or the result of an attempt made to obtain a
    general license or permission for the use of such proprietary rights
    by implementers or users of this specification can be obtained from
    the IETF Secretariat.

    The IETF invites any interested party to bring to its attention any
    copyrights, patents or patent applications, or other proprietary
    rights which may cover technology that may be required to practice
    this standard.  Please address the information to the IETF Executive
    Director.

11. Authors' Addresses

    Riza Cetin
    Alcatel
    Francis Wellesplein 1
    B-2018 Antwerp, Belgium
    Email: riza.cetin@alcatel.be

    Stefaan De Cnodder
    Alcatel
    Francis Wellesplein 1
    B-2018 Antwerp, Belgium
    Email: stefaan.de_cnodder@alcatel.be

    Der-Hwa Gan
    Juniper Networks, Inc.
    1194 N. Mathilda Avenue
    Sunnyvale, CA 94089
    Email: dhg@juniper.net

    Thomas D. Nadeau
    Cisco Systems, Inc.
    300 Apollo Drive
    Chelmsford, MA 01824
    Email: tnadeau@cisco.com

12. Full Copyright Statement

    Copyright (C) The Internet Society (2001). All Rights Reserved.

    This document and translations of it may be copied and furnished to
    others, and derivative works that comment on or otherwise explain it
    or assist in its implementation may be prepared, copied, published
    and distributed, in whole or in part, without restriction of any
    kind, provided that the above copyright notice and this paragraph are
    included on all such copies and derivative works. However, this
    document itself may not be modified in any way, such as by removing
    the copyright notice or references to the Internet Society or other
    Internet organizations, except as needed for the purpose of
    developing Internet standards in which case the procedures for
    copyrights defined in the Internet Standards process must be
    followed, or as required to translate it into languages other than
    English.

    The limited permissions granted above are perpetual and will not be
    revoked by the Internet Society or its successors or assigns.

    This document and the information contained herein is provided on an
    "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
    TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
    BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
    HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Html markup produced by rfcmarkup 1.124, available from https://tools.ietf.org/tools/rfcmarkup/