[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 draft-williams-on-channel-binding

NETWORK WORKING GROUP                                        N. Williams
Internet-Draft                                                       Sun
Expires: December 31, 2006                                 June 29, 2006


           On the Use of Channel Bindings to Secure Channels
                draft-ietf-nfsv4-channel-bindings-04.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on December 31, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This document defines and formalizes the concept of channel bindings
   to secure layers and defines the channel bindings for several types
   of secure channels.

   The concept of channel bindings allows applications to prove that the
   end-points of two secure channels at different network layers are the
   same by binding authentication at one channel to the session
   protection at the other channel.  The use of channel bindings allows
   applications to delegate session protection to lower layers, which



Williams                Expires December 31, 2006               [Page 1]


Internet-Draft             On Channel Bindings                 June 2006


   may significantly improve performance for some applications.


Table of Contents

   1.  Conventions used in this document  . . . . . . . . . . . . . .  3
   2.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
   3.  Definitions  . . . . . . . . . . . . . . . . . . . . . . . . .  6
   4.  Authentication protocols and channel bindings  . . . . . . . .  8
     4.1.  The GSS-API and channel bindings . . . . . . . . . . . . .  8
     4.2.  SASL and channel bindings  . . . . . . . . . . . . . . . .  8
   5.  Channel bindings for various secure layers . . . . . . . . . . 10
     5.1.  Bindings to SSHv2 channels . . . . . . . . . . . . . . . . 10
     5.2.  Bindings to TLS channels . . . . . . . . . . . . . . . . . 10
     5.3.  Bindings to IPsec  . . . . . . . . . . . . . . . . . . . . 10
     5.4.  Bindings to other types of channels  . . . . . . . . . . . 11
   6.  Benefits of channel bindings to secure channels  . . . . . . . 12
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 13
   8.  Normative  . . . . . . . . . . . . . . . . . . . . . . . . . . 13
   Appendix A.  Acknowledgments . . . . . . . . . . . . . . . . . . . 15
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 16
   Intellectual Property and Copyright Statements . . . . . . . . . . 17





























Williams                Expires December 31, 2006               [Page 2]


Internet-Draft             On Channel Bindings                 June 2006


1.  Conventions used in this document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].














































Williams                Expires December 31, 2006               [Page 3]


Internet-Draft             On Channel Bindings                 June 2006


2.  Introduction

   Over the years several attempts have been made to delegate session
   protection at one network layer to another, for performance and/or
   scalability as well as for design elegance and also to avoid having
   to reinvent the wheel (that is, cryptographic session protection) for
   every new application or security layer.

   The critical security problem to solve in order to achieve such
   delegation of session protection is always the same: how to ensure
   that there is no man-in-the-middle (MITM), from the point of view the
   application, at the lower network layer to which session protection
   is to be delegated.

   An alternative statement of the problem: how does one ensure that the
   end-points of two secure channels at different network layers are the
   same?

   And there may well be a MITM, particularly if the lower network layer
   either provides no authentication or if there is no connection
   between the authentication or principals used at the application and
   those used at the lower network layer.

   Such MITM attacks can be effected by, for example, spoofing IP
   address lookups (which is possible, for example, when using DNS but
   not DNSSEC) in a way that the application may not detect but which
   directs the client application or network stack to connect to a
   different host than had been intended (e.g., to the MITM's host).

   Even if such MITM attacks seem particularly difficult to effect, the
   attacks must be prevented for certain applications to be able to make
   effective use of technologies such as IPsec.

   A solution to this problem is highly desirable, particularly where
   multi-user applications are run over secure network layers (e.g., NFS
   over IPsec).  For such applications the authentication model used at
   the application layer (usually user<->server) is generally very
   different from that used by secure, lower network layers, such as
   IPsec (usually client<->server or single-user<->server), and may even
   use different authentication infrastructures altogether (e.g.,
   Kerberos V for the application layer, x.509 certificates at the lower
   layer).  Such applications cannot, at present, generally leverage the
   security provided by the lower network layers, which, if they could,
   would allow them to offload session security to the secure lower
   layer.

   One solution involves ensuring the use of secure name services for
   hostname to network address translation along with the use of secure



Williams                Expires December 31, 2006               [Page 4]


Internet-Draft             On Channel Bindings                 June 2006


   networks (e.g., IPsec).  This approach can prevent the MITM attack
   described above, but does not offer applications any guarantees that
   there is no MITM in the lower layer.

   This document describes another solution: the use of "channel
   bindings" (a GSS-API concept [RFC2743] [RFC2744]) to bind
   authentication at application layers to secure transports at lower
   layers in the network stack.

   "Channel bindings" are data which securely identify a secure channel
   such that, when verified to match on both endpoints of end-to-end
   application connections, leave no doubt that the endpoints of two
   secure channels (the one identified by the bindings and the one used
   to exchange/verify the bindings) are the same.

   Because many applications exist which provide for authentication at
   the application layer, because many such applications use generic
   authentication frameworks, such as the GSS-API and SASL and are
   already deployed along with a common authentication infrastructure
   (e.g., Kerberos V, PKI, etc...), because such applications exist
   which multiplex multiple users onto a single session (and so cannot
   leverage network [e.g., IKE] authentication), the use of channel
   bindings is an elegant solution even where secure name services and
   networks are deployed.

   A formal definition of the channel bindings concept is given below,
   as well as the specific formulation of channel bindings for various
   protocols that provide for session security.

   Specific instructions for the use of channel bindings with GSS-API
   instructions is given elsewhere.




















Williams                Expires December 31, 2006               [Page 5]


Internet-Draft             On Channel Bindings                 June 2006


3.  Definitions

   Definitions:

   o  Secure channel: a packet, datagram or octet stream connection
      between two end-points that affords cryptographic integrity and,
      optionally, confidentiality to data exchanged over it.

   o  Channel binding: ensuring that no man-in-the-middle exists between
      two end-points authenticated at one network layer but using a
      secure channel at a lower network layer.

   o  Channel bindings

         Generally some data which names a channel or its end-points
         such that if this data can be shown, at a higher network layer,
         to be the same at both ends of a channel then there are no
         MITMs between the two end-points at that higher network layer.
         The security properties and channel bindings of the channel,
         once established, MUST NOT change for the lifetime of the
         channel.



         More formally, there are two types of channel bindings:



         +  bindings that name a channel in a cryptographically secure
            manner (e.g., the session ID in SSHv2; see below);

         +  bindings that name the authenticated end-points, or even a
            single end-point, of a channel (e.g., as in IPsec; see
            below) which are, in turn, securely bound to the channel.



         Applications can exchange authenticated, integrity-protected
         verifiers of channel bindings data to prove that the end-points
         of some channel are the logically the same as the application
         endpoints and thus, there can be no MITM at the lower layer.

   o  Channel bindings to network addresses

         The GSS-API originally defined only channel bindings to network
         addresses.





Williams                Expires December 31, 2006               [Page 6]


Internet-Draft             On Channel Bindings                 June 2006


         The network addresses of a channel's end-points typically say
         nothing about the protection afforded by that channel, and
         where the channel can be said to be secure the network
         addresses may not be securely bound to the channel anyways.

         In practice channel bindings to network addresses have mostly
         just caused trouble with Network Address Translation (NAT).












































Williams                Expires December 31, 2006               [Page 7]


Internet-Draft             On Channel Bindings                 June 2006


4.  Authentication protocols and channel bindings

   Some authentication services provide for channel bindings, such as
   the GSS-API and some GSS-API mechanisms, whereas others may not, such
   as SASL (however, ongoing work may add channel binding support to
   SASL).

   Where suitable channel bindings facilities are not provided,
   application protocol designers may include a separate, protected
   (where the authentication service provides message protection
   services) exchange of channel bindings material.

4.1.  The GSS-API and channel bindings

   The GSS-API provides for the use of channel bindings during
   initialization of GSS-API security contexts, though GSS-API
   mechanisms are not required to support this facility.

   This channel bindings facility is described in detail in RFC2744.

   GSS-API applications must agree a priori, through negotiation or
   otherwise, on the use of channel bindings.  This is because the GSS-
   API does not have a way to indicate that a security context was
   successfully established but that the channel bindings supplied could
   not be verified to be the same for both peers.

   Fortunately, it is possible to design GSS-API pseudo-mechanisms that
   simply wrap around existing mechanisms for the purpose of allowing
   applications to negotiate the use of channel bindings within their
   existing methods for negotiating GSS-API mechanisms.  For example,
   NFSv4 [RFC3530] provides its own GSS-API mechanism negotiation, as
   does the SSHv2 protocol [SECSH-GSSAPI].  Such pseudo-mechanisms are
   being proposed separately.  [NOTE: Indirect reference to CCM...]

   However, it does not, at this time, seem feasible to use SPNEGO with
   such pseudo-mechanisms for negotiating the use of channel bindings.

4.2.  SASL and channel bindings

   SASL [RFC2222] does not yet provide for the use of channel bindings
   during initialization of SASL contexts.

   Work is ongoing [I-D.ietf-sasl-gs2] to specify how SASL, particularly
   it's new bridge to the GSS-API, performs channel binding.  SASL will
   likely differ from the GSS-API in its handling of channel binding
   failure (i.e., when there may be a MITM) in that channel binding
   success/failure only affects the negotiation of SASL security layers.
   I.e., when channel binding succeeds SASL should select no security



Williams                Expires December 31, 2006               [Page 8]


Internet-Draft             On Channel Bindings                 June 2006


   layers, leaving session cryptographic protection to the secure
   channel that has been bound to.

















































Williams                Expires December 31, 2006               [Page 9]


Internet-Draft             On Channel Bindings                 June 2006


5.  Channel bindings for various secure layers

   Not every secure session protocol or interface provides for secure
   channels, and not every secure session protocol provides data
   suitable for use as channel bindings.

5.1.  Bindings to SSHv2 channels

   SSHv2 [RFC4251] provides both, a secure channel and material (the
   SSHv2 "session ID") that is suitable for use as channel bindings.

   Thus it is RECOMMENDED that the SSHv2 "session ID" be used as the
   channel bindings for SSHv2.

5.2.  Bindings to TLS channels

   TLS provides both, a secure channel and material (the TLS "finished"
   messages), that is suitable for use as channel bindings.
   Alternatively the TLS PRF can be applied to a suitable constant octet
   string to obtain value that is cryptographically bound to the given
   TLS session.

   The specification of channel bindings for TLS channels is still
   ongoing.

   Note that the TLS "session ID," in spite of being named similarly to
   the SSHv2 session ID, is not suitable for use as channel bindings
   because it is assigned by the server, so a MITM could assign the same
   session ID on the client side as it gets from the server.

5.3.  Bindings to IPsec

   IPsec [RFC4301] does not provide for secure channels by itself, as it
   protects individual packets.  Further, the IPsec SAs used to protect
   the packets for some channel (e.g., a TCP connection) over its
   lifetime need not be related in any way that allows for construction
   of channel bindings.

   There is ongoing work to specify an IPsec secure channel construction
   called "connection latching" [I-D.ietf-btns-connection-latching].

   Given connection latching the channel bindings for IPsec should
   consist of the locally-observed ID types and values for the two end-
   points of the IKE_SA that fathered the CHILD SA that triggered the
   connection latch.  A canonical encoding for these channel bindings
   has not yet been agreed upon.





Williams                Expires December 31, 2006              [Page 10]


Internet-Draft             On Channel Bindings                 June 2006


5.4.  Bindings to other types of channels

   Channel bindings for other secure session protocols are not specified
   here.















































Williams                Expires December 31, 2006              [Page 11]


Internet-Draft             On Channel Bindings                 June 2006


6.  Benefits of channel bindings to secure channels

   The use of channel bindings to delegate session cryptographic
   protection include:

   o  Performance improvements by avoiding double protection of
      application data in cases where IPsec is in use and applications
      provide their own secure channels.

   o  Performance improvements by leveraging hardware-accelerated IPsec.

   o  Performance improvements by allowing RDDP hardware offloading to
      be integrated with IPsec hardware acceleration.

         Where protocols layered above RDDP use privacy protection RDDP
         offload cannot be done, thus by using channel bindings to IPsec
         the privacy protection is moved to IPsec, which is layered
         below RDDP, so RDDP can address application protocol data
         that's in cleartext relative to the RDDP headers.

   o  Latency improvements for applications that multiplex multiple
      users onto a single channel, such as NFS w/ RPCSEC_GSS.





























Williams                Expires December 31, 2006              [Page 12]


Internet-Draft             On Channel Bindings                 June 2006


7.  Security Considerations

   When delegating session protection from one layer to another, one
   will almost certainly be making some session security trade-offs,
   such as using weaker cipher modes in one layer than might be used in
   the other.  Implementors and administrators SHOULD understand these
   trade-offs.

   Channel bindings cannot and MUST NOT be used without mutual
   authentication (of client/user/initiator and server/user/acceptor).

   Anonymous secure channels SHOULD NOT be used without authentication
   and corresponding use of their channel bindings at higher network
   layers.

   The security of channel bindings depends on the security of the
   channels, the construction of the bindings and the security of the
   authentication and integrity protection used to exchange channel
   bindings.

8.  Normative

   [I-D.ietf-btns-connection-latching]
              Williams, N., "IPsec Channels: Connection Latching",
              draft-ietf-btns-connection-latching-00 (work in progress),
              February 2006.

   [I-D.ietf-sasl-gs2]
              Josefsson, S., "Using GSS-API Mechanisms in SASL: The GS2
              Mechanism Family", draft-ietf-sasl-gs2-00 (work in
              progress), February 2006.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2222]  Myers, J., "Simple Authentication and Security Layer
              (SASL)", RFC 2222, October 1997.

   [RFC2743]  Linn, J., "Generic Security Service Application Program
              Interface Version 2, Update 1", RFC 2743, January 2000.

   [RFC2744]  Wray, J., "Generic Security Service API Version 2 :
              C-bindings", RFC 2744, January 2000.

   [RFC3530]  Shepler, S., Callaghan, B., Robinson, D., Thurlow, R.,
              Beame, C., Eisler, M., and D. Noveck, "Network File System
              (NFS) version 4 Protocol", RFC 3530, April 2003.




Williams                Expires December 31, 2006              [Page 13]


Internet-Draft             On Channel Bindings                 June 2006


   [RFC4251]  Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
              Protocol Architecture", RFC 4251, January 2006.

   [RFC4301]  Kent, S. and K. Seo, "Security Architecture for the
              Internet Protocol", RFC 4301, December 2005.














































Williams                Expires December 31, 2006              [Page 14]


Internet-Draft             On Channel Bindings                 June 2006


Appendix A.  Acknowledgments

   The author would like to thank Mike Eisler for his work on the
   Channel Conjunction Mechanism I-D and for bringing the problem to a
   head, Sam Hartman for pointing out that channel bindings provide a
   general solution to the channel binding problem, Jeff Altman for his
   suggestion of using the TLS finished messages as the TLS channel
   bindings, Bill Sommerfeld, for his help in developing channel
   bindings for IPsec, and Radia Perlman for her most helpful comments,
   Simon Josefsson for his work on the new SASL GSS-API bridge and his
   suggestion that the TLS PRF be used to generate channel bindings to
   TLS, and to many others.







































Williams                Expires December 31, 2006              [Page 15]


Internet-Draft             On Channel Bindings                 June 2006


Author's Address

   Nicolas Williams
   Sun Microsystems
   5300 Riata Trace Ct
   Austin, TX  78727
   US

   Email: Nicolas.Williams@sun.com










































Williams                Expires December 31, 2006              [Page 16]


Internet-Draft             On Channel Bindings                 June 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Williams                Expires December 31, 2006              [Page 17]


Html markup produced by rfcmarkup 1.124, available from https://tools.ietf.org/tools/rfcmarkup/