[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05

Network File System Version 4                                   C. Lever
Internet-Draft                                                    Oracle
Updates: 8166 (if approved)                             November 8, 2019
Intended status: Standards Track
Expires: May 11, 2020


    RDMA Connection Manager Private Data For RPC-Over-RDMA Version 1
                draft-ietf-nfsv4-rpcrdma-cm-pvt-data-05

Abstract

   This document specifies the format of RDMA-CM Private Data exchanged
   between RPC-over-RDMA version 1 peers as part of establishing a
   connection.  The addition of the private data payload specified in
   this document is an optional extension that does not alter the RPC-
   over-RDMA version 1 protocol.  This document updates RFC 8166.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 11, 2020.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of




Lever                     Expires May 11, 2020                  [Page 1]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   3
   3.  Advertised Transport Properties . . . . . . . . . . . . . . .   3
     3.1.  Inline Threshold Size . . . . . . . . . . . . . . . . . .   3
     3.2.  Remote Invalidation . . . . . . . . . . . . . . . . . . .   4
   4.  Private Data Message Format . . . . . . . . . . . . . . . . .   5
     4.1.  Interoperability Considerations . . . . . . . . . . . . .   6
       4.1.1.  Amongst RPC-over-RDMA Version 1 Implementations . . .   7
       4.1.2.  Amongst Implementations of Other Upper-Layer
               Protocols . . . . . . . . . . . . . . . . . . . . . .   7
   5.  Updating the Message Format . . . . . . . . . . . . . . . . .   7
     5.1.  Feature Support Flags . . . . . . . . . . . . . . . . . .   8
     5.2.  Inline Threshold Values . . . . . . . . . . . . . . . . .   8
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   8
     6.1.  Guidance for Designated Experts . . . . . . . . . . . . .   9
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .   9
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  10
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  10
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  10
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  11
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  12

1.  Introduction

   The RPC-over-RDMA version 1 transport protocol [RFC8166] enables
   payload data transfer using Remote Direct Memory Access (RDMA) for
   upper-layer protocols based on Remote Procedure Calls (RPC)
   [RFC5531].  The terms "Remote Direct Memory Access" (RDMA) and
   "Direct Data Placement" (DDP) are introduced in [RFC5040].

   The two most immediate shortcomings of RPC-over-RDMA version 1 are:

   o  Setting up an RDMA data transfer (via RDMA Read or Write) can be
      costly.  The small default size of messages transmitted using RDMA
      Send forces the use of RDMA Read or Write operations even for
      relatively small messages and data payloads.
      The original specification of RPC-over-RDMA version 1 provided an
      out-of-band protocol for passing inline threshold values between
      connected peers [RFC5666].  However, [RFC8166] eliminated support
      for this protocol making it unavailable for this purpose.






Lever                     Expires May 11, 2020                  [Page 2]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   o  Unlike most other contemporary RDMA-enabled storage protocols,
      there is no facility in RPC-over-RDMA version 1 that enables the
      use of remote invalidation [RFC5042].

   RPC-over-RDMA version 1 has no means of extending its XDR definition
   in such a way that interoperability with existing implementations is
   preserved.  As a result, an out-of-band mechanism is needed to help
   relieve these constraints for existing RPC-over-RDMA version 1
   implementations.

   This document specifies a simple, non-XDR-based message format
   designed to be passed between RPC-over-RDMA version 1 peers at the
   time each RDMA transport connection is first established.  The
   mechanism assumes that the underlying RDMA transport has a private
   data field that is passed between peers at connection time, such as
   is present in the iWARP protocol (described in Section 7.1 of
   [RFC5044]) or the InfiniBand Connection Manager [IBA].

   To enable current RPC-over-RDMA version 1 implementations to
   interoperate with implementations that support the private message
   format described in this document, implementation of the private data
   message is OPTIONAL.  When the private data message has been
   successfully exchanged, peers may choose to perform extended RDMA
   semantics.  However, the private message format does not alter the
   XDR definition specified in [RFC8166].

   The message format is intended to be further extensible within the
   normal scope of such IETF work (see Section 5 for further details).
   Section 6 of the current document defines an IANA registry for this
   purpose.  In addition, interoperation between implementations of RPC-
   over-RDMA version 1 that present this message format to peers and
   those that do not recognize this message format is guaranteed.

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  Advertised Transport Properties

3.1.  Inline Threshold Size

   Section 3.3.2 of [RFC8166] defines the term "inline threshold."  An
   inline threshold is the maximum number of bytes that can be
   transmitted using one RDMA Send and one RDMA Receive.  There are a



Lever                     Expires May 11, 2020                  [Page 3]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   pair of inline thresholds for a connection: a client-to-server
   threshold and a server-to-client threshold.

   If an incoming message exceeds the size of a receiver's inline
   threshold, the receive operation fails and the connection is
   typically terminated.  To convey a message larger than a receiver's
   inline threshold, an NFS client uses explicit RDMA data transfer
   operations, which are more expensive to use than RDMA Send.

   The default value of inline thresholds for RPC-over-RDMA version 1
   connections is 1024 bytes (see Section 3.3.3 of [RFC8166]).  This
   value is adequate for nearly all NFS version 3 procedures.

   NFS version 4 COMPOUND operations [RFC7530] are larger on average
   than NFS version 3 procedures [RFC1813], forcing clients to use
   explicit RDMA operations for frequently-issued requests such as
   LOOKUP and GETATTR.  The use of RPCSEC_GSS security also increases
   the average size of RPC messages, due to the larger size of
   RPCSEC_GSS credential material included in RPC headers [RFC7861].

   If a sender and receiver could somehow agree on larger inline
   thresholds, frequently-used RPC transactions avoid the cost of
   explicit RDMA operations.

3.2.  Remote Invalidation

   After an RDMA data transfer operation completes, an RDMA consumer can
   use remote invalidation to request that the remote peer RNIC
   invalidate an STag associated with the data transfer [RFC5042].

   An RDMA consumer requests remote invalidation by posting an RDMA Send
   With Invalidate Work Request in place of an RDMA Send Work Request.
   Each RDMA Send With Invalidate carries one STag to invalidate.  The
   receiver of an RDMA Send With Invalidate performs the requested
   invalidation and then reports that invalidation as part of the
   completion of a waiting Receive Work Request.

   If both peers support remote invalidation, an RPC-over-RDMA responder
   might use remote invalidation when replying to an RPC request that
   provided chunks.  Because one of the chunks has already been
   invalidated, finalizing the results of the RPC is made simpler and
   faster.

   However, there are some important caveats which contraindicate the
   blanket use of remote invalidation:

   o  Remote invalidation is not supported by all RNICs.




Lever                     Expires May 11, 2020                  [Page 4]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   o  Not all RPC-over-RDMA responder implementations can generate RDMA
      Send With Invalidate Work Requests.

   o  Not all RPC-over-RDMA requester implementations can recognize when
      remote invalidation has occurred.

   o  On one connection in different RPC-over-RDMA transactions, or in a
      single RPC-over-RDMA transaction, an RPC-over-RDMA requester can
      expose a mixture of STags that may be invalidated remotely and
      some that must not be.  No indication is provided at the RDMA
      layer as to which is which.

   A responder therefore must not employ remote invalidation unless it
   is aware of support for it in its own RDMA stack, and on the
   requester.  And, without altering the XDR structure of RPC-over-RDMA
   version 1 messages, it is not possible to support remote invalidation
   with requesters that mix STags that may and must not be invalidated
   remotely in a single RPC or on the same connection.

   There are some NFS/RDMA client implementations whose STags are always
   safe to invalidate remotely.  For such clients, indicating to the
   responder that remote invalidation is always safe can allow such
   invalidation without the need for additional protocol to be defined.

4.  Private Data Message Format

   With an InfiniBand lower layer, for example, RDMA connection setup
   uses a Connection Manager when establishing a Reliable Connection
   [IBA].  When an RPC-over-RDMA version 1 transport connection is
   established, the client (which actively establishes connections) and
   the server (which passively accepts connections) populate the CM
   Private Data field exchanged as part of CM connection establishment.

   The transport properties exchanged via this mechanism are fixed for
   the life of the connection.  Each new connection presents an
   opportunity for a fresh exchange.  An implementation of the extension
   described in this document MUST be prepared for the settings to
   change upon a reconnection.

   For RPC-over-RDMA version 1, the CM Private Data field is formatted
   as described in the following subsection.  RPC clients and servers
   use the same format.  If the capacity of the Private Data field is
   too small to contain this message format, the underlying RDMA
   transport is not managed by a Connection Manager, or the underlying
   RDMA transport uses Private Data for its own purposes, the CM Private
   Data field cannot be used on behalf of RPC-over-RDMA version 1.





Lever                     Expires May 11, 2020                  [Page 5]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   The first 8 octets of the CM Private Data field is to be formatted as
   follows:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                       Format Identifier                       |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |    Version    |     Flags     |   Send Size   | Receive Size  |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Format Identifier:  This field contains a fixed 32-bit value that
      identifies the content of the Private Data field as an RPC-over-
      RDMA version 1 CM Private Data message.  In RPC-over-RDMA version
      1 Private Data, the value of this field is always 0xf6ab0e18, in
      network byte order.  The use of this field is further expanded
      upon in Section 4.1.

   Version:  This 8-bit field contains a message format version number.
      The value "1" in this field indicates that exactly eight octets
      are present, that they appear in the order described in this
      section, and that each has the meaning defined in this section.
      Further considerations about the use of this field are discussed
      in Section 5.

   Flags:  This 8-bit field contains bit flags that indicate the support
      status of optional features, such as remote invalidation.  The
      meaning of these flags is defined in Section 5.1.

   Send Size:  This 8-bit field contains an encoded value corresponding
      to the maximum number of bytes this peer is prepared to transmit
      in a single RDMA Send on this connection.  The value is encoded as
      described in Section 5.2.

   Receive Size:  This 8-bit field contains an encoded value
      corresponding to the maximum number of bytes this peer is prepared
      to receive with a single RDMA Receive on this connection.  The
      value is encoded as described in Section 5.2.

4.1.  Interoperability Considerations

   The extension described in this document is designed to allow RPC-
   over-RDMA version implementations that use CM Private Data to
   interoperate fully with RPC-over-RDMA version 1 implementations that
   do not exchange this information.  Implementations that use this
   extension must also interoperate fully with RDMA implementations that
   use CM Private Data for other purposes.  Realizing these goals




Lever                     Expires May 11, 2020                  [Page 6]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   require that implementations of this extension follow the practices
   described in the rest of this section.

4.1.1.  Amongst RPC-over-RDMA Version 1 Implementations

   When a peer does not receive a CM Private Data message which conforms
   to Section 4, it needs to act as if the remote peer supports only the
   default RPC-over-RDMA version 1 settings, as defined in [RFC8166].
   In other words, the peer MUST behave as if a Private Data message was
   received in which bit 15 of the Flags field is zero, and both Size
   fields contain the value zero.

4.1.2.  Amongst Implementations of Other Upper-Layer Protocols

   The Format Identifier field in the message format defined in this
   document is provided to enable implementations to distinguish RPC-
   over-RDMA version 1 Private Data from application-specific private
   data inserted by applications other than RPC-over RDMA version 1.
   Examples of other applications that make use of CM Private Data
   include iWARP, via the MPA enhancement described in [RFC6581], and
   iSCSI extensions for RDMA (iSER), as defined in [RFC7145].

   During connection establishment, an implementation of the extension
   described in this document checks the Format Identifier field before
   decoding subsequent fields.  If the RPC-over-RDMA version 1 CM
   Private Data Format Identifier is not present as the first 4 octets,
   an RPC-over-RDMA version 1 receiver MUST ignore the CM Private Data,
   behaving as if no RPC-over-RDMA version 1 Private Data has been
   provided (see above).

5.  Updating the Message Format

   Although the message format described in this document provides the
   ability for the client and server to exchange particular information
   about the local RPC-over-RDMA implementation, it is possible that
   there will be a future need to exchange additional properties.  This
   would make it necessary to extend or otherwise modify the format
   described in this document.

   Any modification faces the problem of interoperating properly with
   implementations of RPC-over-RDMA version 1 that are unaware of this
   existence of the new format.  These include implementations that that
   do not recognize the exchange of CM Private Data as well as those
   that recognize only the format described in this document.

   Given the message format described in this document, these
   interoperability constraints could be met by the following sorts of
   new message formats:



Lever                     Expires May 11, 2020                  [Page 7]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   o  A format which uses a different value for the first four bytes of
      the format, as provided for in the registry described in
      Section 6.

   o  A format which uses the same value for the Format Identifier field
      and a value other than one (1) in the Version field.

   Although it is possible to reorganize the last three of the eight
   bytes in the existing format, extended formats are unlikely to do so.
   New formats would take the form of extensions of the format described
   in this document with added fields starting at byte eight of the
   format and changes to the definition of previously reserved flags.

5.1.  Feature Support Flags

   The bits in the Flags field are labeled from bit 8 to bit 15, as
   shown in the diagram above.  When the Version field contains the
   value "1", the bits in the Flags field are to be set as follows:

   Bit 15:  When both connection peers have set this flag in their CM
      Private Data, the responder MAY use RDMA Send With Invalidate when
      transmitting RPC Replies.  Each RDMA Send With Invalidate MUST
      invalidate an STag associated only with the XID in the rdma_xid
      field of the RPC-over-RDMA Transport Header it carries.
      When either peer on a connection clears this flag, the responder
      MUST use only RDMA Send when transmitting RPC Replies.

   Bits 14 - 8:  These bits are reserved and are always zero when the
      Version field contains 1.

5.2.  Inline Threshold Values

   Inline threshold sizes from 1KB to 256KB can be represented in the
   Send Size and Receive Size fields.  A sender computes the encoded
   value by dividing the actual value by 1024 and subtracting one from
   the result.  A receiver decodes this value by performing a
   complementary set of operations.

   The client uses the smaller of its own send size and the server's
   reported receive size as the client-to-server inline threshold.  The
   server uses the smaller of its own send size and the clients's
   reported receive size as the server-to-client inline threshold.

6.  IANA Considerations

   In accordance with [RFC8126], the author requests that IANA create a
   new registry in the "Remote Direct Data Placement" Protocol Category
   Group.  The new registry is to be called the "RDMA-CM Private Data



Lever                     Expires May 11, 2020                  [Page 8]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   Identifier Registry".  This is a registry of 32-bit numbers that
   identify the upper-layer protocol associated with data that appears
   in the application-specific RDMA-CM Private Data area.  The fields in
   this registry include: Format Identifier, Description, and Reference.

   The initial contents of this registry are a single entry:

   +------------------+------------------------------------+-----------+
   | Format           | Format Description                 | Reference |
   | Identifier       |                                    |           |
   +------------------+------------------------------------+-----------+
   | 0xf6ab0e18       | RPC-over-RDMA version 1 CM Private | [RFC-TBD] |
   |                  | Data                               |           |
   +------------------+------------------------------------+-----------+

             Table 1: RDMA-CM Private Data Identifier Registry

   IANA is to assign subsequent new entries in this registry using the
   Expert Review policy as defined in Section 4.5 of [RFC8126].

6.1.  Guidance for Designated Experts

   The Designated Expert (DE), appointed by the IESG, should ascertain
   the existence of suitable documentation that defines the semantics
   and format of the private data, and verify that the document is
   permanently and publicly available.  Documentation produced outside
   the IETF must not conflict with work that is active or already
   published within the IETF.

   The new Reference field should contain a reference to that
   documentation.  The DE can assign new Format Identifiers at random as
   long as they do not conflict with existing entries in this registry.
   The Description field should contain the name of a distinct upper-
   layer RDMA consumer that will use the private data.

   The DE will post the request to the nfsv4 WG mailing list (or a
   successor to that list, if such a list exists), for comment and
   review.  The DE will approve or deny the request and publish notice
   of the decision within 30 days.

7.  Security Considerations

   The Private Data extension specified in this document inherits the
   security considerations of the protocols it extends, which in this
   case is defined in [RFC8166].

   The integrity of CM Private Data and the authenticity of it's source
   is ensured by the use of the Reliable connected (RC) Queue Pair (QP)



Lever                     Expires May 11, 2020                  [Page 9]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   type, required by RPC-over-RDMA version 1.  Any attempts to interfere
   with or hijack an RC connection will result in the connection being
   immediately terminated.  Additional relevant analysis of RDMA
   security appears in the Security Considerations section of [RFC5042].

   Improperly setting one of the fields in the private message payload
   will result in a greatly increased risk of disconnection (i.e., self-
   imposed Denial of Service).  There is no increased risk of exposing
   upper-layer data inappropriately.

8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC5040]  Recio, R., Metzler, B., Culley, P., Hilland, J., and D.
              Garcia, "A Remote Direct Memory Access Protocol
              Specification", RFC 5040, DOI 10.17487/RFC5040, October
              2007, <https://www.rfc-editor.org/info/rfc5040>.

   [RFC5042]  Pinkerton, J. and E. Deleganes, "Direct Data Placement
              Protocol (DDP) / Remote Direct Memory Access Protocol
              (RDMAP) Security", RFC 5042, DOI 10.17487/RFC5042, October
              2007, <https://www.rfc-editor.org/info/rfc5042>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8166]  Lever, C., Ed., Simpson, W., and T. Talpey, "Remote Direct
              Memory Access Transport for Remote Procedure Call Version
              1", RFC 8166, DOI 10.17487/RFC8166, June 2017,
              <https://www.rfc-editor.org/info/rfc8166>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

8.2.  Informative References

   [IBA]      InfiniBand Trade Association, "InfiniBand Architecture
              Specification Volume 1", Release 1.3, March 2015.




Lever                     Expires May 11, 2020                 [Page 10]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


              Available from https://www.infinibandta.org/

   [RFC1813]  Callaghan, B., Pawlowski, B., and P. Staubach, "NFS
              Version 3 Protocol Specification", RFC 1813,
              DOI 10.17487/RFC1813, June 1995,
              <https://www.rfc-editor.org/info/rfc1813>.

   [RFC5044]  Culley, P., Elzur, U., Recio, R., Bailey, S., and J.
              Carrier, "Marker PDU Aligned Framing for TCP
              Specification", RFC 5044, DOI 10.17487/RFC5044, October
              2007, <https://www.rfc-editor.org/info/rfc5044>.

   [RFC5531]  Thurlow, R., "RPC: Remote Procedure Call Protocol
              Specification Version 2", RFC 5531, DOI 10.17487/RFC5531,
              May 2009, <https://www.rfc-editor.org/info/rfc5531>.

   [RFC5666]  Talpey, T. and B. Callaghan, "Remote Direct Memory Access
              Transport for Remote Procedure Call", RFC 5666,
              DOI 10.17487/RFC5666, January 2010,
              <https://www.rfc-editor.org/info/rfc5666>.

   [RFC6581]  Kanevsky, A., Ed., Bestler, C., Ed., Sharp, R., and S.
              Wise, "Enhanced Remote Direct Memory Access (RDMA)
              Connection Establishment", RFC 6581, DOI 10.17487/RFC6581,
              April 2012, <https://www.rfc-editor.org/info/rfc6581>.

   [RFC7145]  Ko, M. and A. Nezhinsky, "Internet Small Computer System
              Interface (iSCSI) Extensions for the Remote Direct Memory
              Access (RDMA) Specification", RFC 7145,
              DOI 10.17487/RFC7145, April 2014,
              <https://www.rfc-editor.org/info/rfc7145>.

   [RFC7530]  Haynes, T., Ed. and D. Noveck, Ed., "Network File System
              (NFS) Version 4 Protocol", RFC 7530, DOI 10.17487/RFC7530,
              March 2015, <https://www.rfc-editor.org/info/rfc7530>.

   [RFC7861]  Adamson, A. and N. Williams, "Remote Procedure Call (RPC)
              Security Version 3", RFC 7861, DOI 10.17487/RFC7861,
              November 2016, <https://www.rfc-editor.org/info/rfc7861>.

Acknowledgments

   Thanks to Christoph Hellwig and Devesh Sharma for suggesting this
   approach, and to Tom Talpey and Dave Noveck for their expert comments
   and review.  The author also wishes to thank Bill Baker and Greg
   Marsden for their support of this work.





Lever                     Expires May 11, 2020                 [Page 11]


Internet-Draft        RPC-Over-RDMA CM Private Data        November 2019


   Special thanks go to Transport Area Director Magnus Westerlund, NFSV4
   Working Group Chairs Spencer Shepler and Brian Pawlowski, and NFSV4
   Working Group Secretary Thomas Haynes.

Author's Address

   Charles Lever
   Oracle Corporation
   United States of America

   Email: chuck.lever@oracle.com








































Lever                     Expires May 11, 2020                 [Page 12]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/