[Docs] [txt|pdf|xml] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-wdenniss-oauth-native-apps) 00 01 02 03 04 05 06 07 08 09 10 11 12 RFC 8252

OAuth Working Group                                           W. Denniss
Internet-Draft                                                    Google
Intended status: Best Current Practice                        J. Bradley
Expires: November 20, 2017                                 Ping Identity
                                                            May 19, 2017


                       OAuth 2.0 for Native Apps
                    draft-ietf-oauth-native-apps-11

Abstract

   OAuth 2.0 authorization requests from native apps should only be made
   through external user-agents, primarily the user's browser.  This
   specification details the security and usability reasons why this is
   the case, and how native apps and authorization servers can implement
   this best practice.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 20, 2017.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of




Denniss & Bradley       Expires November 20, 2017               [Page 1]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Notational Conventions  . . . . . . . . . . . . . . . . . . .   3
   3.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Overview  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
     4.1.  Authorization Flow for Native Apps Using the Browser  . .   5
   5.  Using Inter-app URI Communication for OAuth . . . . . . . . .   6
   6.  Initiating the Authorization Request from a Native App  . . .   6
   7.  Receiving the Authorization Response in a Native App  . . . .   7
     7.1.  Private-use URI Scheme Redirection  . . . . . . . . . . .   8
     7.2.  Claimed HTTPS URI Redirection . . . . . . . . . . . . . .   9
     7.3.  Loopback Interface Redirection  . . . . . . . . . . . . .   9
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  10
     8.1.  Protecting the Authorization Code . . . . . . . . . . . .  10
     8.2.  OAuth Implicit Grant Authorization Flow . . . . . . . . .  11
     8.3.  Loopback Redirect Considerations  . . . . . . . . . . . .  11
     8.4.  Registration of Native App Clients  . . . . . . . . . . .  11
     8.5.  Client Authentication . . . . . . . . . . . . . . . . . .  12
     8.6.  Client Impersonation  . . . . . . . . . . . . . . . . . .  12
     8.7.  Phishability of In-App Browser Tabs . . . . . . . . . . .  13
     8.8.  Cross-App Request Forgery Protections . . . . . . . . . .  13
     8.9.  Authorization Server Mix-Up Mitigation  . . . . . . . . .  14
     8.10. Non-Browser External User-Agents  . . . . . . . . . . . .  14
     8.11. Embedded User-Agents  . . . . . . . . . . . . . . . . . .  14
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  15
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  15
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  15
     10.2.  Informative References . . . . . . . . . . . . . . . . .  16
   Appendix A.  Server Support Checklist . . . . . . . . . . . . . .  16
   Appendix B.  Operating System Specific Implementation Details . .  17
     B.1.  iOS Implementation Details  . . . . . . . . . . . . . . .  17
     B.2.  Android Implementation Details  . . . . . . . . . . . . .  18
     B.3.  Windows Implementation Details  . . . . . . . . . . . . .  18
     B.4.  macOS Implementation Details  . . . . . . . . . . . . . .  19
     B.5.  Linux Implementation Details  . . . . . . . . . . . . . .  19
   Appendix C.  Acknowledgements . . . . . . . . . . . . . . . . . .  19
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  20

1.  Introduction

   The OAuth 2.0 [RFC6749] authorization framework documents two
   approaches in Section 9 for native apps to interact with the
   authorization endpoint: an embedded user-agent, and an external user-
   agent.



Denniss & Bradley       Expires November 20, 2017               [Page 2]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   This best current practice requires that only external user-agents
   like the browser are used for OAuth by native apps.  It documents how
   native apps can implement authorization flows using the browser as
   the preferred external user-agent, and the requirements for
   authorization servers to support such usage.

   This practice is also known as the AppAuth pattern, in reference to
   open source libraries that implement it.

2.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in Key
   words for use in RFCs to Indicate Requirement Levels [RFC2119].  If
   these words are used without being spelled in uppercase then they are
   to be interpreted with their normal natural language meanings.

3.  Terminology

   In addition to the terms defined in referenced specifications, this
   document uses the following terms:

   "native app"  An app or application that is installed by the user to
      their device, as distinct from a web app that runs in the browser
      context only.  Apps implemented using web-based technology but
      distributed as a native app, so-called hybrid apps, are considered
      equivalent to native apps for the purpose of this specification.

   "app"  In this document, "app" means a "native app" unless further
      specified.

   "app store"  An ecommerce store where users can download and purchase
      apps.

   "OAuth"  In this document, OAuth refers to OAuth 2.0 [RFC6749].

   "external user-agent"  A user-agent capable of handling the
      authorization request that is a separate entity or security domain
      to the native app making the request (such as a browser), such
      that the app cannot access the cookie storage, nor inspect or
      modify page content.

   "embedded user-agent"  A user-agent hosted inside the native app
      itself (such as via a web-view), with which the app has control
      over to the extent it is capable of accessing the cookie storage
      and/or modifying the page content.




Denniss & Bradley       Expires November 20, 2017               [Page 3]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   "browser"  The default application launched by the operating system
      to handle "http" and "https" scheme URI content.

   "in-app browser tab"  A programmatic instantiation of the browser
      that is displayed inside a host app, but retains the full security
      properties and authentication state of the browser.  Has different
      platform-specific product names, such as SFSafariViewController on
      iOS, and Custom Tabs on Android.

   "inter-app communication"  Communication between two apps on a
      device.

   "claimed HTTPS URI"  Some platforms allow apps to claim a HTTPS
      scheme URI after proving ownership of the domain name.  URIs
      claimed in such a way are then opened in the app instead of the
      browser.

   "private-use URI scheme"  A private-use URI scheme defined by the app
      and registered with the operating system.  URI requests to such
      schemes trigger the app which registered it to be launched to
      handle the request.

   "web-view"  A web browser UI component that can be embedded in apps
      to render web pages, used to create embedded user-agents.

   "reverse domain name notation"  A naming convention based on the
      domain name system, but where the domain components are reversed,
      for example "app.example.com" becomes "com.example.app".

4.  Overview

   The best current practice for authorizing users in native apps is to
   perform the OAuth authorization request in an external user-agent
   (typically the browser), rather than an embedded user-agent (such as
   one implemented with web-views).

   Previously it was common for native apps to use embedded user-agents
   (commonly implemented with web-views) for OAuth authorization
   requests.  That approach has many drawbacks, including the host app
   being able to copy user credentials and cookies, and the user needing
   to authenticate from scratch in each app.  See Section 8.11 for a
   deeper analysis of using embedded user-agents for OAuth.

   Native app authorization requests that use the browser are more
   secure and can take advantage of the user's authentication state.
   Being able to use the existing authentication session in the browser
   enables single sign-on, as users don't need to authenticate to the




Denniss & Bradley       Expires November 20, 2017               [Page 4]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   authorization server each time they use a new app (unless required by
   authorization server policy).

   Supporting authorization flows between a native app and the browser
   is possible without changing the OAuth protocol itself, as the
   authorization request and response are already defined in terms of
   URIs, which encompasses URIs that can be used for inter-app
   communication.  Some OAuth server implementations that assume all
   clients are confidential web-clients will need to add an
   understanding of public native app clients and the types of redirect
   URIs they use to support this best practice.

4.1.  Authorization Flow for Native Apps Using the Browser

  +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
  |          User Device           |
  |                                |
  | +---------------------------+  |                     +-----------+
  | |                           |  | (5) Authz Code      |           |
  | |        Client App         |----------------------->|  Token    |
  | |                           |<-----------------------|  Endpoint |
  | +---------------------------+  | (6) Access Token,   |           |
  |    |              ^            |     Refresh Token   +-----------+
  |    |              |            |
  |    |              |            |
  |    | (1)          | (4)        |
  |    | Authz        | Authz      |
  |    | Request      | Code       |
  |    |              |            |
  |    |              |            |
  |    v              |            |
  | +---------------------------+  |                   +---------------+
  | |                           |  | (2) Authz Request |               |
  | |          Browser          |--------------------->| Authorization |
  | |                           |<---------------------| Endpoint      |
  | +---------------------------+  | (3) Authz Code    |               |
  |                                |                   +---------------+
  +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+

        Figure 1: Native App Authorization via External User-agent

   Figure 1 illustrates the interaction of the native app with a browser
   external user-agent to authorize the user.

   (1)  The client app opens a browser tab with the authorization
        request.





Denniss & Bradley       Expires November 20, 2017               [Page 5]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   (2)  Authorization endpoint receives the authorization request,
        authenticates the user and obtains authorization.
        Authenticating the user may involve chaining to other
        authentication systems.

   (3)  Authorization server issues an authorization code to the
        redirect URI.

   (4)  Client receives the authorization code from the redirect URI.

   (5)  Client app presents the authorization code at the token
        endpoint.

   (6)  Token endpoint validates the authorization code and issues the
        tokens requested.

5.  Using Inter-app URI Communication for OAuth

   Just as URIs are used for OAuth 2.0 [RFC6749] on the web to initiate
   the authorization request and return the authorization response to
   the requesting website, URIs can be used by native apps to initiate
   the authorization request in the device's browser and return the
   response to the requesting native app.

   By adopting the same methods used on the web for OAuth, benefits seen
   in the web context like the usability of a single sign-on session and
   the security of a separate authentication context are likewise gained
   in the native app context.  Re-using the same approach also reduces
   the implementation complexity and increases interoperability by
   relying on standards-based web flows that are not specific to a
   particular platform.

   To conform to this best practice, native apps MUST use an external
   user-agent to perform OAuth authentication requests.  This is
   achieved by opening the authorization request in the browser
   (detailed in Section 6), and using a redirect URI that will return
   the authorization response back to the native app, as defined in
   Section 7.

6.  Initiating the Authorization Request from a Native App

   Native apps needing user authorization create an authorization
   request URI with the authorization code grant type per Section 4.1 of
   OAuth 2.0 [RFC6749], using a redirect URI capable of being received
   by the native app.

   The function of the redirect URI for a native app authorization
   request is similar to that of a web-based authorization request.



Denniss & Bradley       Expires November 20, 2017               [Page 6]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   Rather than returning the authorization response to the OAuth
   client's server, the redirect URI used by a native app returns the
   response to the app.  Several options for a redirect URI that will
   return the authorization response to the native app in different
   platforms are documented in Section 7.  Any redirect URI that allows
   the app to receive the URI and inspect its parameters is viable.

   Public native app clients MUST implement the Proof Key for Code
   Exchange (PKCE [RFC7636]) extension to OAuth, and authorization
   servers MUST support PKCE for such clients, for the reasons detailed
   in Section 8.1.

   After constructing the authorization request URI, the app uses
   platform-specific APIs to open the URI in an external user-agent.
   Typically the external user-agent used is the default browser, that
   is, the application configured for handling "http" and "https" scheme
   URIs on the system, but different browser selection criteria and
   other categories of external user-agents MAY be used.

   This best practice focuses on the browser as the RECOMMENDED external
   user-agent for native apps.  An external user-agent designed
   specifically for processing authorization requests capable of
   processing the request and redirect URIs in the same way MAY also be
   used.  Other external user-agents, such as a native app provided by
   the authorization server may meet the criteria set out in this best
   practice, including using the same redirection URI properties, but
   their use is out of scope for this specification.

   Some platforms support a browser feature known as in-app browser
   tabs, where an app can present a tab of the browser within the app
   context without switching apps, but still retain key benefits of the
   browser such as a shared authentication state and security context.
   On platforms where they are supported, it is RECOMMENDED for
   usability reasons that apps use in-app browser tabs for the
   authorization request.

7.  Receiving the Authorization Response in a Native App

   There are several redirect URI options available to native apps for
   receiving the authorization response from the browser, the
   availability and user experience of which varies by platform.

   To fully support this best practice, authorization servers MUST
   support the following three redirect URI options.  Native apps MAY
   use whichever redirect option suits their needs best, taking into
   account platform specific implementation details.





Denniss & Bradley       Expires November 20, 2017               [Page 7]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


7.1.  Private-use URI Scheme Redirection

   Many mobile and desktop computing platforms support inter-app
   communication via URIs by allowing apps to register private-use URI
   schemes (sometimes colloquially referred to as custom URL schemes)
   like "com.example.app".  When the browser or another app attempts to
   load a URI with a custom scheme, the app that registered it is
   launched to handle the request.

   To perform an OAuth 2.0 authorization request with a private-use URI
   scheme redirect, the native app launches the browser with a standard
   authorization request, but one where the redirection URI utilizes a
   custom URI scheme it registered with the operating system.

   When choosing a URI scheme to associate with the app, apps MUST use a
   URI scheme based on a domain name under their control, expressed in
   reverse order, as recommended by Section 3.8 of [RFC7595] for
   private-use URI schemes.

   For example, an app that controls the domain name "app.example.com"
   can use "com.example.app" as their scheme.  Some authorization
   servers assign client identifiers based on domain names, for example
   "client1234.usercontent.example.net", which can also be used as the
   domain name for the scheme when reversed in the same manner.  A
   scheme such as "myapp" however would not meet this requirement, as it
   is not based on a domain name.

   Care must be taken when there are multiple apps by the same publisher
   that each scheme is unique within that group.  On platforms that use
   app identifiers that are also based on reverse order domain names,
   those can be reused as the private-use URI scheme for the OAuth
   redirect to help avoid this problem.

   Following the requirements of [RFC3986] Section 3.2, as there is no
   naming authority for private-use URI scheme redirects, only a single
   slash ("/") appears after the scheme component.  A complete example
   of a redirect URI utilizing a private-use URI scheme:

     com.example.app:/oauth2redirect/example-provider

   When the authentication server completes the request, it redirects to
   the client's redirection URI as it would normally.  As the
   redirection URI uses a custom scheme it results in the operating
   system launching the native app, passing in the URI as a launch
   parameter.  The native app then processes the authorization response
   like normal.





Denniss & Bradley       Expires November 20, 2017               [Page 8]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


7.2.  Claimed HTTPS URI Redirection

   Some operating systems allow apps to claim HTTPS scheme URIs in
   domains they control.  When the browser encounters a claimed URI,
   instead of the page being loaded in the browser, the native app is
   launched with the URI supplied as a launch parameter.

   Such URIs can be used as OAuth redirect URIs.  They are
   indistinguishable from OAuth redirects of web-based clients.  An
   example is:

     https://app.example.com/oauth2redirect/example-provider

   App-claimed HTTPS redirect URIs have some advantages in that the
   identity of the destination app is guaranteed by the operating
   system.  For this reason, they SHOULD be used in preference to the
   other redirect options for native apps where possible.

   Claimed HTTPS redirect URIs function as normal HTTPS redirects from
   the perspective of the authorization server, though as stated in
   Section 8.4, it is REQUIRED that the authorization server is able to
   distinguish between public native app clients that use app-claimed
   HTTPS redirect URIs and confidential web clients.

7.3.  Loopback Interface Redirection

   Native apps that are able to open a port on the loopback network
   interface without needing special permissions (typically, those on
   desktop operating systems) can use the loopback interface to receive
   the OAuth redirect.

   Loopback redirect URIs use the HTTP scheme and are constructed with
   the loopback IP literal and whatever port the client is listening on.
   That is, "http://127.0.0.1:{port}/{path}" for IPv4, and
   "http://[::1]:{port}/{path}" for IPv6.  An example redirect using the
   IPv4 loopback interface with a randomly assigned port:

     http://127.0.0.1:50719/oauth2redirect/example-provider

   An example redirect using the IPv6 loopback interface with a randomly
   assigned port:

     http://[::1]:61023/oauth2redirect/example-provider

   The authorization server MUST allow any port to be specified at the
   time of the request for loopback IP redirect URIs, to accommodate
   clients that obtain an available ephemeral port from the operating
   system at the time of the request.



Denniss & Bradley       Expires November 20, 2017               [Page 9]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   Clients SHOULD NOT assume the device supports a particular version of
   the Internet Protocol.  It is RECOMMENDED that clients attempt to
   bind to the loopback interface using both IPv4 and IPv6, and use
   whichever is available.

8.  Security Considerations

8.1.  Protecting the Authorization Code

   The redirect URI options documented in Section 7 share the benefit
   that only a native app on the same device can receive the
   authorization code which limits the attack surface, however code
   interception by a native app other than the intended app may still be
   possible.

   A limitation of using private-use URI schemes for redirect URIs is
   that multiple apps can typically register the same scheme, which
   makes it indeterminate as to which app will receive the Authorization
   Code.  PKCE [RFC7636] details how this limitation can be used to
   execute a code interception attack (see Figure 1).

   Loopback IP based redirect URIs may be susceptible to interception by
   other apps listening on the same loopback interface.

   As most forms of inter-app URI-based communication send data over
   insecure local channels, eavesdropping and interception of the
   authorization response is a risk for native apps.  App-claimed HTTPS
   redirects are hardened against this type of attack due to the
   presence of the URI authority, but they are still public clients and
   the URI is still transmitted over local channels with unknown
   security properties.

   The Proof Key for Code Exchange by OAuth Public Clients (PKCE
   [RFC7636]) standard was created specifically to mitigate against this
   attack.  It is a Proof of Possession extension to OAuth 2.0 that
   protects the code grant from being used if it is intercepted.  It
   achieves this by having the client generate a secret verifier, a hash
   of which it passes in the initial authorization request, and which it
   must present in full when redeeming the authorization code grant.  An
   app that intercepted the authorization code would not be in
   possession of this secret, rendering the code useless.

   Section 8.1 requires that both clients and servers use PKCE for
   public native app clients.  Authorization servers SHOULD reject
   authorization requests from native apps that don't use PKCE by
   returning an error message as defined in Section 4.4.1 of PKCE
   [RFC7636].




Denniss & Bradley       Expires November 20, 2017              [Page 10]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


8.2.  OAuth Implicit Grant Authorization Flow

   The OAuth 2.0 implicit grant authorization flow as defined in
   Section 4.2 of OAuth 2.0 [RFC6749] generally works with the practice
   of performing the authorization request in the browser, and receiving
   the authorization response via URI-based inter-app communication.
   However, as the Implicit Flow cannot be protected by PKCE (which is a
   required in Section 8.1), the use of the Implicit Flow with native
   apps is NOT RECOMMENDED.

   Tokens granted via the implicit flow also cannot be refreshed without
   user interaction, making the authorization code grant flow - which
   can issue refresh tokens - the more practical option for native app
   authorizations that require refreshing.

8.3.  Loopback Redirect Considerations

   Loopback interface redirect URIs use the "http" scheme (i.e., without
   TLS).  This is acceptable for loopback interface redirect URIs as the
   HTTP request never leaves the device.

   Clients should open the network port only when starting the
   authorization request, and close it once the response is returned.

   Clients should listen on the loopback network interface only, to
   avoid interference by other network actors.

   While redirect URIs using localhost (i.e.,
   "http://localhost:{port}/") function similarly to loopback IP
   redirects described in Section 7.3, the use of "localhost" is NOT
   RECOMMENDED.  Specifying a redirect URI with the loopback IP literal
   rather than localhost avoids inadvertently listening on network
   interfaces other than the loopback interface.  It is also less
   susceptible to client side firewalls, and misconfigured host name
   resolution on the user's device.

8.4.  Registration of Native App Clients

   Native apps, except when using a mechanism like Dynamic Client
   Registration [RFC7591] to provision per-instance secrets, are
   classified as public clients, as defined by Section 2.1 of OAuth 2.0
   [RFC6749] and MUST be registered with the authorization server as
   such.  Authorization servers MUST record the client type in the
   client registration details in order to identify and process requests
   accordingly.

   Authorization servers MUST require clients to register their complete
   redirect URI (including the path component), and reject authorization



Denniss & Bradley       Expires November 20, 2017              [Page 11]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   requests that specify a redirect URI that doesn't exactly match the
   one that was registered, with the exception of loopback redirects,
   where an exact match is required except for the port URI component.

   For private-use URI scheme based redirects, authorization servers
   SHOULD enforce the requirement in Section 7.1 that clients use
   reverse domain name based schemes.  At a minimum, any scheme that
   doesn't contain a period character ("."), SHOULD be rejected.

   In addition to the collision resistant properties, requiring a URI
   scheme based on a domain name that is under the control of the app
   can help to prove ownership in the event of a dispute where two apps
   claim the same private-use URI scheme (where one app is acting
   maliciously).  For example, if two apps claimed "com.example.app",
   the owner of "example.com" could petition the app store operator to
   remove the counterfeit app.  Such a petition is harder to prove if a
   generic URI scheme was used.

   Authorization servers MAY request the inclusion of other platform-
   specific information, such as the app package or bundle name, or
   other information used to associate the app that may be useful for
   verifying the calling app's identity, on operating systems that
   support such functions.

8.5.  Client Authentication

   Secrets that are statically included as part of an app distributed to
   multiple users should not be treated as confidential secrets, as one
   user may inspect their copy and learn the shared secret.  For this
   reason, and those stated in Section 5.3.1 of [RFC6819], it is NOT
   RECOMMENDED for authorization servers to require client
   authentication of public native apps clients using a shared secret,
   as this serves little value beyond client identification which is
   already provided by the "client_id" request parameter.

   Authorization servers that still require a statically included shared
   secret for native app clients MUST treat the client as a public
   client (as defined by Section 2.1 of OAuth 2.0 [RFC6749]), and not
   accept the secret as proof of the client's identity.  Without
   additional measures, such clients are subject to client impersonation
   (see Section 8.6).

8.6.  Client Impersonation

   As stated in Section 10.2 of OAuth 2.0 [RFC6749], the authorization
   server SHOULD NOT process authorization requests automatically
   without user consent or interaction, except when the identity of the
   client can be assured.  This includes the case where the user has



Denniss & Bradley       Expires November 20, 2017              [Page 12]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   previously approved an authorization request for a given client id -
   unless the identity of the client can be proven, the request SHOULD
   be processed as if no previous request had been approved.

   Measures such as claimed HTTPS redirects MAY be accepted by
   authorization servers as identity proof.  Some operating systems may
   offer alternative platform-specific identity features which MAY be
   accepted, as appropriate.

8.7.  Phishability of In-App Browser Tabs

   While in-app browser tabs provide a secure authentication context, as
   the user initiates the flow from a native app, it is possible for
   that native app to completely fake an in-app browser tab.

   This can't be prevented directly - once the user is in the native
   app, that app is fully in control of what it can render - however
   there are several mitigating factors.

   Importantly, such an attack that uses a web-view to fake an in-app
   browser tab will always start with no authentication state.  If all
   native apps use the techniques described in this best practice, users
   will not need to sign-in frequently and thus should be suspicious of
   any sign-in request when they should have already been signed-in.

   This is the case even for authorization servers that require
   occasional or frequent re-authentication, as such servers can
   preserve some user identifiable information from the old session,
   such as the email address or profile picture and display that
   information during re-authentication.

   Users who are particularly concerned about their security may also
   take the additional step of opening the request in the browser from
   the in-app browser tab, and completing the authorization there, as
   most implementations of the in-app browser tab pattern offer such
   functionality.

8.8.  Cross-App Request Forgery Protections

   Section 5.3.5 of [RFC6819] recommends using the "state" parameter to
   link client requests and responses to prevent CSRF (Cross Site
   Request Forgery) attacks.

   To mitigate CSRF style attacks using inter-app URI communication, it
   is similarly RECOMMENDED for native apps to include a high entropy
   secure random number in the "state" parameter of the authorization
   request, and reject any incoming authorization responses without a
   state value that matches a pending outgoing authorization request.



Denniss & Bradley       Expires November 20, 2017              [Page 13]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


8.9.  Authorization Server Mix-Up Mitigation

   To protect against a compromised or malicious authorization server
   attacking another authorization server used by the same app, it is
   REQUIRED that a unique redirect URI is used for each authorization
   server used by the app (for example, by varying the path component),
   and that authorization responses are rejected if the redirect URI
   they were received on doesn't match the redirect URI in a outgoing
   authorization request.

   The native app MUST store the redirect URI used in the authorization
   request with the authorization session data (i.e., along with "state"
   and other related data), and MUST verify that the URI on which the
   authorization response was received exactly matches it.

   The requirements of Section 8.4 that authorization servers reject
   requests with URIs that don't match what was registered are also
   required to prevent such attacks.

8.10.  Non-Browser External User-Agents

   This best practice recommends a particular type of external user-
   agent, the user's browser.  Other external user-agent patterns may
   also be viable for secure and usable OAuth.  This document makes no
   comment on those patterns.

8.11.  Embedded User-Agents

   OAuth 2.0 [RFC6749] Section 9 documents two approaches for native
   apps to interact with the authorization endpoint.  This best current
   practice requires that native apps MUST NOT use embedded user-agents
   to perform authorization requests, and allows that authorization
   endpoints MAY take steps to detect and block authorization requests
   in embedded user-agents.  The security considerations for these
   requirements are detailed herein.

   Embedded user-agents are an alternative method for authorizing native
   apps.  These embedded user agents are unsafe for use by third-parties
   to the authorization server by definition, as the app that hosts the
   embedded user-agent can access the user's full authentication
   credential, not just the OAuth authorization grant that was intended
   for the app.

   In typical web-view based implementations of embedded user-agents,
   the host application can: log every keystroke entered in the form to
   capture usernames and passwords; automatically submit forms and
   bypass user-consent; copy session cookies and use them to perform
   authenticated actions as the user.



Denniss & Bradley       Expires November 20, 2017              [Page 14]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   Even when used by trusted apps belonging to the same party as the
   authorization server, embedded user-agents violate the principle of
   least privilege by having access to more powerful credentials than
   they need, potentially increasing the attack surface.

   Encouraging users to enter credentials in an embedded user-agent
   without the usual address bar and visible certificate validation
   features that browsers have makes it impossible for the user to know
   if they are signing in to the legitimate site, and even when they
   are, it trains them that it's OK to enter credentials without
   validating the site first.

   Aside from the security concerns, embedded user-agents do not share
   the authentication state with other apps or the browser, requiring
   the user to login for every authorization request which is often
   considered an inferior user experience.

9.  IANA Considerations

   [RFC Editor: please do NOT remove this section.]

   This document has no IANA actions.

   Section 7.1 specifies how private-use URI schemes are used for inter-
   app communication in OAuth protocol flows.  This document requires in
   Section 7.1 that such schemes are based on domain names owned or
   assigned to the app, as recommended in Section 3.8 of [RFC7595].  Per
   Section 6 of [RFC7595], registration of domain based URI schemes with
   IANA is not required.

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <http://www.rfc-editor.org/info/rfc3986>.

   [RFC6749]  Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
              RFC 6749, DOI 10.17487/RFC6749, October 2012,
              <http://www.rfc-editor.org/info/rfc6749>.




Denniss & Bradley       Expires November 20, 2017              [Page 15]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   [RFC7595]  Thaler, D., Ed., Hansen, T., and T. Hardie, "Guidelines
              and Registration Procedures for URI Schemes", BCP 35,
              RFC 7595, DOI 10.17487/RFC7595, June 2015,
              <http://www.rfc-editor.org/info/rfc7595>.

   [RFC7636]  Sakimura, N., Ed., Bradley, J., and N. Agarwal, "Proof Key
              for Code Exchange by OAuth Public Clients", RFC 7636,
              DOI 10.17487/RFC7636, September 2015,
              <http://www.rfc-editor.org/info/rfc7636>.

10.2.  Informative References

   [RFC6819]  Lodderstedt, T., Ed., McGloin, M., and P. Hunt, "OAuth 2.0
              Threat Model and Security Considerations", RFC 6819,
              DOI 10.17487/RFC6819, January 2013,
              <http://www.rfc-editor.org/info/rfc6819>.

   [RFC7591]  Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and
              P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol",
              RFC 7591, DOI 10.17487/RFC7591, July 2015,
              <http://www.rfc-editor.org/info/rfc7591>.

   [AppAuth.iOSmacOS]
              Wright, S., Denniss, W., and others, "AppAuth for iOS and
              macOS", February 2016, <https://github.com/openid/AppAuth-
              iOS>.

   [AppAuth.Android]
              McGinniss, I., Denniss, W., and others, "AppAuth for
              Android", February 2016, <https://github.com/openid/
              AppAuth-Android>.

   [SamplesForWindows]
              Denniss, W., "OAuth for Apps: Samples for Windows", July
              2016, <https://github.com/googlesamples/oauth-apps-for-
              windows>.

Appendix A.  Server Support Checklist

   OAuth servers that support native apps must:

   1.  Support private-use URI scheme redirect URIs.  This is required
       to support mobile operating systems.  See Section 7.1.

   2.  Support HTTPS scheme redirect URIs for use with public native app
       clients.  This is used by apps on advanced mobile operating
       systems that allow app-claimed URIs.  See Section 7.2.




Denniss & Bradley       Expires November 20, 2017              [Page 16]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   3.  Support loopback IP redirect URIs.  This is required to support
       desktop operating systems.  See Section 7.3.

   4.  Not assume native app clients can keep a secret.  If secrets are
       distributed to multiple installs of the same native app, they
       should not be treated as confidential.  See Section 8.5.

   5.  Support PKCE [RFC7636].  Required to protect authorization code
       grants sent to public clients over inter-app communication
       channels.  See Section 8.1

Appendix B.  Operating System Specific Implementation Details

   This document primarily defines best practices in an generic manner,
   referencing techniques commonly available in a variety of
   environments.  This non-normative section documents operating system
   specific implementation details of the best practice.

   The implementation details herein are considered accurate at the time
   of publishing but will likely change over time.  It is hoped that
   such change won't invalidate the generic principles in the rest of
   the document, and those principles should take precedence in the
   event of a conflict.

B.1.  iOS Implementation Details

   Apps can initiate an authorization request in the browser without the
   user leaving the app, through the SFSafariViewController class which
   implements the in-app browser tab pattern.  Safari can be used to
   handle requests on old versions of iOS without
   SFSafariViewController.

   To receive the authorization response, both private-use URI scheme
   redirects (referred to as Custom URL Schemes) and claimed HTTPS links
   (known as Universal Links) are viable choices, and function the same
   whether the request is loaded in SFSafariViewController or the Safari
   app.  Apps can claim Custom URI schemes with the "CFBundleURLTypes"
   key in the application's property list file "Info.plist", and HTTPS
   links using the Universal Links feature with an entitlement file and
   an association file on the domain.

   Universal Links are the preferred choice on iOS 9 and above due to
   the ownership proof that is provided by the operating system.

   A complete open source sample is included in the AppAuth for iOS and
   macOS [AppAuth.iOSmacOS] library.





Denniss & Bradley       Expires November 20, 2017              [Page 17]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


B.2.  Android Implementation Details

   Apps can initiate an authorization request in the browser without the
   user leaving the app, through the Android Custom Tab feature which
   implements the in-app browser tab pattern.  The user's default
   browser can be used to handle requests when no browser supports
   Custom Tabs.

   Android browser vendors should support the Custom Tabs protocol (by
   providing an implementation of the "CustomTabsService" class), to
   provide the in-app browser tab user experience optimization to their
   users.  Chrome is one such browser that implements Custom Tabs.

   To receive the authorization response, private-use URI schemes are
   broadly supported through Android Implicit Intends.  Claimed HTTPS
   redirect URIs through Android App Links are available on Android 6.0
   and above.  Both types of redirect URIs are registered in the
   application's manifest.

   A complete open source sample is included in the AppAuth for Android
   [AppAuth.Android] library.

B.3.  Windows Implementation Details

   Universal Windows Platform (UWP) apps can use the Web Authentication
   Broker API in SSO mode as an external user-agent for authorization
   flows, and all app types can open an authorization request in the
   user's default browser using platform APIs for opening URIs in the
   browser.

   The Web Authentication Broker when used in SSO mode is an external
   user-agent with an authentication context that is shared with all
   invocations of the broker but not the user's browser.  Note that if
   not used in SSO mode, the broker is an embedded user-agent, hence
   only operation in SSO mode is RECOMMENDED.

   To use the Web Authentication Broker in SSO mode, the redirect URI
   must be of the form "msapp://{appSID}" where "appSID" is the app's
   SID, which can be found in the app's registration information.  While
   Windows enforces the URI authority on such redirects, ensuring only
   the app with the matching SID can receive the response on Windows,
   the URI scheme could be claimed by apps on other platforms without
   the same authority present, thus this redirect type should be treated
   similar to private-use URI scheme redirects for security purposes.

   Both traditional and Universal Windows Platform (UWP) apps can
   perform authorization requests in the user's browser.  Traditional
   apps typically use a loopback redirect to receive the authorization



Denniss & Bradley       Expires November 20, 2017              [Page 18]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   response, and listening on the loopback interface is allowed by
   default firewall rules.  Universal Windows Platform (UWP) apps can
   use private-use URI scheme redirects to receive the authorization
   response, which will bring the app to the foreground.  Known on the
   platform as "URI Activation", the URI scheme is limited to 39
   characters in length, and may include the "." character, making short
   reverse domain name based schemes (as recommended in Section 7.1)
   possible.

   An open source sample demonstrating these patterns is available
   [SamplesForWindows].

B.4.  macOS Implementation Details

   Apps can initiate an authorization request in the user's default
   browser using platform APIs for opening URIs in the browser.

   To receive the authorization response, private-use URI schemes are
   are a good redirect URI choice on macOS, as the user is returned
   right back to the app they launched the request from.  These are
   registered in the application's bundle information property list
   using the "CFBundleURLSchemes" key.  Loopback IP redirects are
   another viable option, and listening on the loopback interface is
   allowed by default firewall rules.

   A complete open source sample is included in the AppAuth for iOS and
   macOS [AppAuth.iOSmacOS] library.

B.5.  Linux Implementation Details

   Opening the Authorization Request in the user's default browser
   requires a distro-specific command, "xdg-open" is one such tool.

   The loopback redirect is the recommended redirect choice for desktop
   apps on Linux to receive the authorization response.

Appendix C.  Acknowledgements

   The author would like to acknowledge the work of Marius Scurtescu,
   and Ben Wiley Sittler whose design for using private-use URI schemes
   in native OAuth 2.0 clients at Google formed the basis of
   Section 7.1.

   The following individuals contributed ideas, feedback, and wording
   that shaped and formed the final specification:

   Andy Zmolek, Steven E Wright, Brian Campbell, Nat Sakimura, Eric
   Sachs, Paul Madsen, Iain McGinniss, Rahul Ravikumar, Breno de



Denniss & Bradley       Expires November 20, 2017              [Page 19]


Internet-Draft          OAuth 2.0 for Native Apps               May 2017


   Medeiros, Hannes Tschofenig, Ashish Jain, Erik Wahlstrom, Bill
   Fisher, Sudhi Umarji, Michael B. Jones, Vittorio Bertocci, Dick
   Hardt, David Waite, Ignacio Fiorentino, Kathleen Moriarty, and Elwyn
   Davies.

Authors' Addresses

   William Denniss
   Google
   1600 Amphitheatre Pkwy
   Mountain View, CA  94043
   USA

   Email: wdenniss@google.com
   URI:   http://wdenniss.com/appauth


   John Bradley
   Ping Identity

   Phone: +1 202-630-5272
   Email: ve7jtb@ve7jtb.com
   URI:   http://www.thread-safe.com/p/appauth.html




























Denniss & Bradley       Expires November 20, 2017              [Page 20]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/