[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 RFC 5643 Draft is active
In: Proposed Standard
Network Working Group                                          Editors

                                                             Dan Joyal
Internet Draft                                                  Nortel

                                                        Vishwas Manral
                                                           IP Infusion

Document: draft-ietf-ospf-ospfv3-mib-11.txt                August 2006
Expires: February 2007


                Management Information Base for OSPFv3


  Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other documents
   at any time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/1id-abstracts.html

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

  Copyright Notice

   Copyright (C) The Internet Society (2006). All rights reserved.

  Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in IPv6-based internets.
   In particular, it defines objects for managing the Open Shortest Path
   First Routing Protocol for IPv6.

   Please send comments to ospf@ietf.org.

  Table of Contents

   1. The Internet-Standard Management Framework.....................2

Internet Draft          Expires February 2007                [Page 1]


                              OSPFv3 MIB                   August 2006


   2. Overview.......................................................2
   2.1  IPv6 Interfaces..............................................3
   2.2  Addressing Semantics.........................................4
   2.3  Authentication...............................................4
   2.4  Type of Service..............................................4
   2.5  Flooding Scope...............................................4
   2.6  Virtual Links................................................4
   2.7  Neighbors....................................................5
   2.8  Conventions..................................................5
   3. Structure of the OSPFv3 MIB....................................5
   3.1  General Variables............................................5
   3.2  Area Table...................................................5
   3.3  Area-Scope, Link-Scope and AS-Scope Link State Database......5
   3.4  Host Table...................................................5
   3.5  Interface Table..............................................5
   3.6  Virtual Interface Table......................................6
   3.7  Neighbor, Configured Neighbor and Virtual Neighbor
        Tables.......................................................6
   3.8  Aggregate Range Table........................................6
   4. Definitions....................................................6
   5. Security Considerations.......................................65
   6. IANA Considerations...........................................65
   7. Acknowledgements..............................................66
   8. Normative References..........................................66
   9. Informative References........................................67
   10.Contributors' Addresses.......................................67
   11.Authors' Addresses............................................67
   12.Differences from RFC 1850.....................................68
   13.Full Copyright Statement......................................73
   14.Intellectual Property.........................................73


1. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB. MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI). This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580]

2. Overview

   This memo defines a portion of the Management Information Base (MIB)
   for managing the Open Shortest Path First Routing Protocol for IPv6
   [RFC2740], otherwise known as OSPF version 3 (OSPFv3). Though the
   fundamental mechanisms of OSPF version 2 (OSPFv2) [RFC2328] remain

Internet Draft          Expires February 2007                [Page 2]


                              OSPFv3 MIB                   August 2006


   unchanged in OSPFv3, some changes were necessary due to differences
   in IP address size and in protocol semantics between IPv4 and IPv6.
   In many cases, where the protocol operations have not changed from
   OSPFv2, the specification for OSPFv3 does not restate the details,
   but instead refers to the relevant sections in the OSPFv2
   specification. This MIB follows along the same lines and includes
   Reference clauses referring to the OSPFv2 specification when
   applicable.

   An attempt was made to align the OSPFv3 MIB as closely as possible
   with the OSPFv2 MIB. The following subsections highlight the major
   differences between the OSPFv2 MIB [RFC1850] and the OSPFv3 MIB. A
   detailed list of differences can be found in Appendix A.

   2.1. IPv6 Interfaces

   IPv6 interfaces attach to links [RFC2460]. A link is roughly defined
   as the layer below IPv6 (e.g. Ethernet, IPv4 Tunnel). One or more
   IPv6 prefixes can be associated with an IPv6 interface. IPv6
   interfaces and the prefixes associated with those interfaces can be
   configured via the IPV6-MIB [RFC2465]. IPv6 interfaces are configured
   in the IPv6 Interface Table and IPv6 prefixes are configured in the
   IPv6 Address Prefix Table. An IPv6 interface is identified by a
   unique index value. IPv6 Address Prefix Table entries associated with
   an IPv6 interface reference the interface's index.

   Whereas an interface identifier in OSPFv2 is a local IPv4 address or
   MIB-2 interface index, an OSPFv3 interface identifier is an IPv6
   interface index. For example, the index value of an OSPFv3 Interface
   Table entry is the IPv6 interface index of the IPv6 interface over
   which OSPFv3 is configured to operate.

   2.2. Addressing Semantics

   Router ID, Area ID and Link State ID remain at the OSPFv2 size of 32
   bits. To ensure uniqueness, a router running both IPv4 and IPv6
   concurrently can continue to use a local IPv4 host address,
   represented as an unsigned 32-bit value, as the OSPFv3 Router ID.
   Otherwise, the Router ID must be selected using another method (e.g.
   administratively assigned).

   Router ID, Area ID and Link State ID do not have addressing semantics
   in OSPFv3, so their syntax is changed to Unsigned32. The order of the
   Router ID and Link State ID index components in Link State Database
   Tables are reversed in OSPFv3 since the lack of addressing semantics
   in Link State IDs make them less unique identifiers than the Router
   ID. It is more useful to do partial OID lookups extending to the
   Router ID rather than the Link State ID.

   2.3. Authentication




Internet Draft          Expires February 2007                [Page 3]


                              OSPFv3 MIB                   August 2006


   In OSPFv3, authentication has been removed from the protocol itself.
   MIB objects related to authentication are not carried forward from
   the OSPFv2 MIB.

   2.4. Type of Service

   OSPFv2 MIB objects related to Type of Service (ToS) are not carried
   forward to the OSPFv3 MIB.

   2.5. Flooding Scope

   Flooding scope for LSAs has been generalized and is now explicitly
   encoded in the LSA's LS type field. The action to take upon receipt
   of unknown LSA types is also encoded in the LS type field [RFC2740].
   The OSPFv3 MIB defines three Link State Database tables, one each
   for Area-scope LSAs, Link-scope LSAs and AS-scope LSAs.

   2.6. Virtual Links

   Since addressing semantics have been removed from router-LSAs in
   OSPFv3, Virtual Links now need to be assigned an interface ID for
   advertisement in Hello packets and in router-LSAs. A read-only
   object has been added to the Virtual Interface Table entry to view
   the assigned interface ID.

   2.7. Neighbors

   The OSPFv2 Neighbor Table has been split into two tables. The OSPFv3
   Neighbor Table is a read-only table and it contains information
   learned from Hellos received from neighbors, including Configured
   neighbors. The OSPFv3 Configured Neighbor Table contains entries for
   manually configured neighbors and neighbors dynamically discovered by
   lower-level protocols such as Inverse Neighbor Discovery.

   2.8 Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
   NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   RFC 2119 [RFC2119].


3. Structure of the OSPFv3 MIB

   The MIB is composed of the following sections:

        General Variables
        Area Table
        Area-Scope Link State Database
        Link-Scope Link State Database
        AS-Scope Link State Database
        Host Table
        Interface Table

Internet Draft          Expires February 2007                [Page 4]


                              OSPFv3 MIB                   August 2006


        Virtual Interface Table
        Neighbor Table
        Configured Neighbor Table
        Virtual Neighbor Table
        Aggregate Range Table

   3.1. General Variables

   The General Variables are global to the OSPFv3 Process.

   3.2. Area Table

   The Area Data Structure describes the OSPFv3 Areas that the
   router participates in.

   3.3. Area-Scope, Link-Scope and AS-Scope Link State Database

   The Link State Databases are provided primarily to provide
   detailed information for network debugging.

   3.4. Host Table

   The Host Table is provided to view configured Host Route
   information.

   3.5. Interface Table

   The Interface Table describes the various IPv6 links on which
   OSPFv3 is configured.

   3.6. Virtual Interface Table

   The Virtual Interface Table describes virtual OSPFv3 links.

   3.7. Neighbor, Configured Neighbor and Virtual Neighbor Tables

   The Neighbor Table, the Configured Neighbor Table and the Virtual
   Neighbor Table describe the neighbors to the OSPFv3 Process.

   3.8. Aggregate Range Table

   The Aggregate Range Table describes prefixes, which summarize
   routing information for export outside of an Area.


4. Definitions

    OSPFV3-MIB DEFINITIONS ::= BEGIN

    IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
            Counter32, Gauge32, Integer32, Unsigned32
                    FROM SNMPv2-SMI

Internet Draft          Expires February 2007                [Page 5]


                              OSPFv3 MIB                   August 2006


            TEXTUAL-CONVENTION, TruthValue, RowStatus
                    FROM SNMPv2-TC
            MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                    FROM SNMPv2-CONF
            InterfaceIndex
                    FROM IF-MIB
            InetAddressType, InetAddress, InetAddressPrefixLength
                    FROM INET-ADDRESS-MIB
            Metric, BigMetric, Status,
            HelloRange, DesignatedRouterPriority
                    FROM OSPF-MIB;

    ospfv3MIB MODULE-IDENTITY
            LAST-UPDATED "200608091200Z"
            ORGANIZATION "IETF OSPF Working Group"
            CONTACT-INFO
                "WG E-Mail: ospf@ietf.org
                 WG Chairs: acee@cisco.com
                            dube.rohit@gmail.com

                 Dan Joyal
                 Nortel
                 600 Technology Park Drive
                 Billerica, MA  01821, USA
                 djoyal@nortel.com

                 Vishwas Manral
                 IP Infusion
                 Bangalore
                 India
                 vishwas@ipinfusion.com"

             DESCRIPTION
                 "The MIB module for OSPF version 3.

                  Copyright (C) The Internet Society (2006).
                  This version of this MIB module is part of
                  RFC XXXX;  see the RFC itself for full legal
                  notices."

             REVISION "200608091200Z"
             DESCRIPTION -- RFC Editor assigns RFC xxxx
                 "Initial version, published as RFC xxxx"

             ::= { mib-2 XXX } -- to be assigned by IANA

    -- Texual conventions

    Ospfv3UpToRefreshIntervalTc ::= TEXTUAL-CONVENTION
             DISPLAY-HINT "d"
             STATUS        current
             DESCRIPTION


Internet Draft          Expires February 2007                [Page 6]


                              OSPFv3 MIB                   August 2006


                "The values one might be able to configure for
                variables bounded by the Refresh Interval"
             SYNTAX      Integer32 (1..1800)

    Ospfv3DeadIntRangeTc ::= TEXTUAL-CONVENTION
             DISPLAY-HINT "d"
             STATUS        current
             DESCRIPTION
                "The range, in seconds, of dead interval value."
             SYNTAX      Integer32 (1..'FFFF'h)

    Ospfv3RouterIdTc ::= TEXTUAL-CONVENTION
             DISPLAY-HINT "d"
             STATUS      current
             DESCRIPTION
                "A 32-bit, unsigned integer uniquely identifying the
                router in the Autonomous System. To ensure uniqueness,
                this may default to the value of one of the router's
                IPv4 host addresses if IPv4 is configured on the
                router."
             SYNTAX      Unsigned32 (1..'FFFFFFFF'h)

    Ospfv3AreaIdTc ::= TEXTUAL-CONVENTION
             DISPLAY-HINT "d"
             STATUS      current
             DESCRIPTION
                "An OSPFv3 Area Identifier"
             SYNTAX      Unsigned32 (0..'FFFFFFFF'h)

    Ospfv3IfInstIdTc ::= TEXTUAL-CONVENTION
             DISPLAY-HINT "d"
             STATUS      current
             DESCRIPTION
                "An OSPFv3 interface instance ID"
             SYNTAX      Integer32 (0..255)


    -- Top-level structure of MIB
    ospfv3Notifications  OBJECT IDENTIFIER ::= { ospfv3MIB 0 }
    ospfv3Objects        OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
    ospfv3Conformance    OBJECT IDENTIFIER ::= { ospfv3MIB 2 }

    -- OSPFv3 General Variables

    -- These parameters apply globally to the Router's
    -- OSPFv3 Process.

    ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }

    ospfv3RouterId OBJECT-TYPE
            SYNTAX         Ospfv3RouterIdTc
            MAX-ACCESS     read-write
            STATUS         current

Internet Draft          Expires February 2007                [Page 7]


                              OSPFv3 MIB                   August 2006


            DESCRIPTION
                "A 32-bit integer uniquely identifying the
                router in the Autonomous System. To ensure
                uniqueness, this may default to the value of
                one of the router's IPv4 host addresses,
                represented as a 32-bit unsigned integer,
                if IPv4 is configured on the router."
            ::= { ospfv3GeneralGroup 1 }

    ospfv3AdminStat OBJECT-TYPE
            SYNTAX          Status
            MAX-ACCESS      read-write
            STATUS          current
            DESCRIPTION
                "The administrative status of OSPFv3 in the
                router. The value 'enabled' denotes that the
                OSPFv3 Process is active on at least one
                interface; 'disabled' disables it on all
                interfaces."
            ::= { ospfv3GeneralGroup 2 }

    ospfv3VersionNumber OBJECT-TYPE
            SYNTAX          INTEGER { version3 (3) }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The version number of OSPF for IPv6 is 3."
            ::= { ospfv3GeneralGroup 3 }

    ospfv3AreaBdrRtrStatus OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "A flag to note whether this router is an area
                border router."
            REFERENCE
                "OSPF Version 2, Section 3 Splitting the AS into
                Areas"
            ::= { ospfv3GeneralGroup 4 }

    ospfv3ASBdrRtrStatus OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-write
            STATUS          current
            DESCRIPTION
                "A flag to note whether this router is
                configured as an Autonomous System border router."
            REFERENCE
                "OSPF Version 2, Section 3.3 Classification of
                routers"
            ::= { ospfv3GeneralGroup 5 }


Internet Draft          Expires February 2007                [Page 8]


                              OSPFv3 MIB                   August 2006


    ospfv3AsScopeLsaCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of AS-Scope (e.g. AS-External) link state
                advertisements in the link state database."
            ::= { ospfv3GeneralGroup 6 }

    ospfv3AsScopeLsaCksumSum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The 32-bit unsigned sum of the LS checksums of
                the AS-scoped link state advertisements
                contained in the link state database. This sum
                can be used to determine if there has been a
                change in a router's link state database, and
                to compare the link state database of two
                routers."
            ::= { ospfv3GeneralGroup 7 }

    ospfv3OriginateNewLsas OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of new link-state advertisements
                that have been originated. This number is
                incremented each time the router originates a new
                LSA."
            ::= { ospfv3GeneralGroup 8 }

    ospfv3RxNewLsas OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of link state advertisements
                received determined to be new instantiations.
                This number does not include newer
                instantiations of self-originated link state
                advertisements."
            ::= { ospfv3GeneralGroup 9 }

    ospfv3ExtLsaCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of External(LS type 0x4005) in the
                link state database"

Internet Draft          Expires February 2007                [Page 9]


                              OSPFv3 MIB                   August 2006


            ::= { ospfv3GeneralGroup 10 }


    ospfv3ExtAreaLsdbLimit OBJECT-TYPE
            SYNTAX          Integer32 (-1..'7FFFFFFF'h)
            MAX-ACCESS      read-write
            STATUS          current
            DESCRIPTION
                "The maximum number of non-default
                AS-external-LSAs entries that can be stored in the
                link state database. If the value is -1, then
                there is no limit.

                When the number of non-default AS-external-LSAs
                in a router's link-state database reaches
                ospfv3ExtAreaLsdbLimit, the router enters Overflow
                state. The router never holds more than
                ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
                in its database. Ospfv3ExtAreaLsdbLimit MUST be set
                identically in all routers attached to the OSPFv3
                backbone and/or any regular OSPFv3 area. (i.e.,
                OSPFv3 stub areas and NSSAs are excluded)."
            ::= { ospfv3GeneralGroup 11 }

    ospfv3MulticastExtensions OBJECT-TYPE
            SYNTAX          BITS {
                                     intraAreaMulticast(0),
                                     interAreaMulticast(1),
                                     interAsMulticast(2)
                                 }

            MAX-ACCESS      read-write
            STATUS          current
            DESCRIPTION
                "A Bit Mask indicating whether the router is
                forwarding IPv6 multicast datagrams based on
                the algorithms defined in the  Multicast
                Extensions to OSPF.

                If intraAreaMulticast set, indicates that the router
                can forward IPv6 multicast datagrams in the router's
                directly attached areas (called intra-area
                multicast routing).

                If interAreaMulticast set, indicates that the router
                can forward IPv6 multicast datagrams between OSPFv3
                areas (called inter-area multicast routing).

                If interAsMulticast set, indicates that the router can
                forward  IPv6  multicast datagrams between
                Autonomous Systems (called inter-AS multicast
                routing).


Internet Draft          Expires February 2007               [Page 10]


                              OSPFv3 MIB                   August 2006


                Only certain combinations of bit settings are
                allowed, namely:
                        - All bits cleared (no multicasting)
                        - intraAreaMulticast only,
                        - intraAreaMulticast and interAreaMulticast,
                        - intraAreaMulticast and interAsMulticast
                        - intraAreaMulticast, interAreaMulticast and
                                interAsMulticast
                By default, all bits are cleared."
            ::= { ospfv3GeneralGroup 12 }

    ospfv3ExitOverflowInterval OBJECT-TYPE
            SYNTAX          Unsigned32
            UNITS           "seconds"
            MAX-ACCESS      read-write
            STATUS          current
            DESCRIPTION
                "The number of seconds that, after entering
                Overflow State, a router will attempt to leave
                Overflow State. This allows the router to again
                originate non-default, AS-External-LSAs. When
                set to 0, the router will not leave Overflow
                State until restarted."
            ::= { ospfv3GeneralGroup 13 }

    ospfv3DemandExtensions OBJECT-TYPE
            SYNTAX         TruthValue
            MAX-ACCESS     read-write
            STATUS         current
            DESCRIPTION
                "The router's support for demand routing."
            REFERENCE
                "OSPF Version 2, Appendix on Demand Routing"
            ::= { ospfv3GeneralGroup 14 }

    ospfv3ReferenceBandwidth OBJECT-TYPE
           SYNTAX       Unsigned32
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
              "Reference bandwidth in kilobits/second for
              calculating default interface metrics. The
              default value is 100,000 KBPS (100 MBPS)"
        ::= { ospfv3GeneralGroup 15 }

    ospfv3RestartSupport OBJECT-TYPE
           SYNTAX       INTEGER { none (1),
                                  plannedOnly (2),
                                  plannedAndUnplanned (3)
                             }
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION

Internet Draft          Expires February 2007               [Page 11]


                              OSPFv3 MIB                   August 2006


              "The router's support for OSPF Graceful restart.
              Options include: no restart support, only planned
              restarts or both planned and unplanned restarts."
           ::= { ospfv3GeneralGroup 16 }

    ospfv3RestartInterval OBJECT-TYPE
           SYNTAX       Ospfv3UpToRefreshIntervalTc
           UNITS        "seconds"
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
              "Configured OSPF Graceful restart timeout interval."
           ::= { ospfv3GeneralGroup 17 }

    ospfv3RestartStatus OBJECT-TYPE
           SYNTAX       INTEGER { notRestarting (1),
                                  plannedRestart (2),
                                  unplannedRestart (3)
                                }
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "The current status of OSPF Graceful restart capability."
           ::= { ospfv3GeneralGroup 18 }

    ospfv3RestartAge OBJECT-TYPE
           SYNTAX       Ospfv3UpToRefreshIntervalTc
           UNITS        "seconds"
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Remaining time in current OSPF Graceful restart
              interval."
           ::= { ospfv3GeneralGroup 19 }

    ospfv3RestartExitRc OBJECT-TYPE
           SYNTAX       INTEGER { none (1),
                                  inProgress (2),
                                  completed (3),
                                  timedOut (4),
                                  topologyChanged (5)
                                }
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Describes the outcome of the last attempt at a
              Graceful restart.

              none:............no restart has yet been attempted.
              inProgress:......a restart attempt is currently underway.
              completed:.......the last restart completed successfully.
              timedOut:........the last restart timed out.
              topologyChanged:.the last restart was aborted due to

Internet Draft          Expires February 2007               [Page 12]


                              OSPFv3 MIB                   August 2006


                               a topology change."
        ::= { ospfv3GeneralGroup 20 }

    ospfv3NotificationEnable OBJECT-TYPE
           SYNTAX TruthValue
           MAX-ACCESS read-write
           STATUS current
           DESCRIPTION
               "If this object is set to true(1), then it enables
                the generation of OSPFv3 Notifications. If it is
                set to false(2), these notifications are not
                generated.

                Configured values MUST survive an agent reboot."
           DEFVAL { true }
       ::= { ospfv3GeneralGroup 21 }



    -- The OSPFv3 Area Data Structure contains information
    -- regarding the various areas. The interfaces and
    -- virtual links are configured as part of these areas.
    -- Area 0, by definition, is the Backbone Area

    ospfv3AreaTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3AreaEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Information describing the configured
                parameters and cumulative statistics of the router's
                attached areas."
            REFERENCE
                "OSPF Version 2, Section 6 The Area Data
                Structure"
            ::= { ospfv3Objects 2 }

    ospfv3AreaEntry OBJECT-TYPE
            SYNTAX          Ospfv3AreaEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Information describing the configured
                parameters and cumulative statistics of one of the
                router's attached areas."
            INDEX           { ospfv3AreaId }
            ::= { ospfv3AreaTable 1 }

    Ospfv3AreaEntry ::= SEQUENCE {
            ospfv3AreaId
                    Ospfv3AreaIdTc,
            ospfv3ImportAsExtern
                    INTEGER,

Internet Draft          Expires February 2007               [Page 13]


                              OSPFv3 MIB                   August 2006


            ospfv3AreaSpfRuns
                    Counter32,
            ospfv3AreaBdrRtrCount
                    Gauge32,
            ospfv3AreaAsBdrRtrCount
                    Gauge32,
            ospfv3AreaScopeLsaCount
                    Gauge32,
            ospfv3AreaScopeLsaCksumSum
                    Integer32,
            ospfv3AreaSummary
                    INTEGER,
            ospfv3AreaStatus
                    RowStatus,
            ospfv3StubMetric
                    BigMetric,
            ospfv3AreaNssaTranslatorRole
                    INTEGER,
            ospfv3AreaNssaTranslatorState
                    INTEGER,
            ospfv3AreaNssaTranslatorStabInt
                    Unsigned32,
            ospfv3AreaNssaTranslatorEvents
                    Counter32,
            ospfv3AreaStubMetricType
                    INTEGER
            }

    ospfv3AreaId OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A 32-bit integer uniquely identifying an area.
                Area ID 0 is used for the OSPFv3 backbone."
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3AreaEntry 1 }

    ospfv3ImportAsExtern OBJECT-TYPE
            SYNTAX          INTEGER {
                            importExternal(1),   -- normal area
                            importNoExternal(2), -- stub area
                            importNssa(3)        -- not-so-stubby-area
                            }
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "Indicates whether an area is a Stub area, NSSA, or
                standard area. AS-scope LSAs are not imported into Stub
                Areas or NSSAs. NSSAs import AS-External data as NSSA
                LSAs which have Area-scope"
            REFERENCE

Internet Draft          Expires February 2007               [Page 14]


                              OSPFv3 MIB                   August 2006


                "OSPF Version 2, Appendix C.2 Area parameters"
            DEFVAL { importExternal }
            ::= { ospfv3AreaEntry 2 }

    ospfv3AreaSpfRuns OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of times that the intra-area route
                table has been calculated using this area's
                link state database. This is typically done
                using Dijkstra's algorithm."
            ::= { ospfv3AreaEntry 3 }

    ospfv3AreaBdrRtrCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The total number of area border routers
                reachable within this area. This is initially zero,
                and is calculated in each SPF Pass."
            ::= { ospfv3AreaEntry 4 }

    ospfv3AreaAsBdrRtrCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The total number of Autonomous System border
                routers reachable within this area. This is
                initially zero, and is calculated in each SPF
                Pass."
            ::= { ospfv3AreaEntry 5 }

    ospfv3AreaScopeLsaCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The total number of Area-Scope link state
                advertisements in this area's link state
                database."
            ::= { ospfv3AreaEntry 6 }

    ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The 32-bit unsigned sum of the Area-Scope link state
                advertisements' LS checksums contained in this

Internet Draft          Expires February 2007               [Page 15]


                              OSPFv3 MIB                   August 2006


                area's link state database. The sum can be used
                to determine if there has been a change in a
                router's link state database, and to compare the
                link-state database of two routers."
            ::= { ospfv3AreaEntry 7 }

    ospfv3AreaSummary OBJECT-TYPE
            SYNTAX          INTEGER {
                            noAreaSummary(1),
                            sendAreaSummary(2)
                            }
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The variable ospfv3AreaSummary controls the
                import of Inter-Area LSAs into stub and
                NSSA areas. It has no effect on other areas.

                If it is noAreaSummary, the router will neither
                originate nor propagate Inter-Area LSAs into the
                stub or NSSA area. It will rely entirely on its
                default route.

                If it is sendAreaSummary, the router will both
                summarize and propagate Inter-Area LSAs."
            DEFVAL   { sendAreaSummary }
            ::= { ospfv3AreaEntry 8 }

    ospfv3AreaStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on
                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3AreaEntry 9 }

    ospfv3StubMetric OBJECT-TYPE
            SYNTAX          BigMetric
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The metric value advertised for the default route
                 into Stub and NSSA areas."
            ::= { ospfv3AreaEntry 10 }

    ospfv3AreaNssaTranslatorRole OBJECT-TYPE
            SYNTAX          INTEGER { always(1), candidate(2) }

Internet Draft          Expires February 2007               [Page 16]


                              OSPFv3 MIB                   August 2006


            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "Indicates an NSSA Border router's ability to
                perform NSSA translation of NSSA-LSAs into
                AS-External-LSAs."
            DEFVAL { candidate }
            ::= { ospfv3AreaEntry 11 }

    ospfv3AreaNssaTranslatorState OBJECT-TYPE
            SYNTAX          INTEGER {
                            enabled(1),
                            elected(2),
                            disabled(3)
                            }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates if and how an NSSA Border router is
                 performing NSSA translation of NSSA-LSAs into
                AS-External-LSA's. When this object is set to enabled,
                the NSSA Border router's ospfv3AreaNssTranslatorRole
                has been set to always. When this object is set to
                elected, a candidate NSSA Border router is translating
                NSSA-LSA's into AS-External-LSA's. When this object is
                set to disabled, a candidate NSSA Border router is NOT
                translating NSSA-LSA's into AS-External-LSA's."
            ::= { ospfv3AreaEntry 12 }

    ospfv3AreaNssaTranslatorStabInt OBJECT-TYPE
            SYNTAX          Unsigned32
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The number of seconds after an elected translator
                determines its services are no longer required, that
                it should continue to perform its translation duties."
            DEFVAL { 40 }
            ::= { ospfv3AreaEntry 13 }

    ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates the number of Translator State changes
                that have occurred since the last boot-up."
            ::= { ospfv3AreaEntry 14 }

    ospfv3AreaStubMetricType OBJECT-TYPE
            SYNTAX       INTEGER {
                            ospfv3Metric (1),   -- OSPF Metric

Internet Draft          Expires February 2007               [Page 17]


                              OSPFv3 MIB                   August 2006


                            comparableCost (2), -- external type 1
                            nonComparable (3)   -- external type 2
                            }
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION
               "This variable displays the type of metric
               advertised as a default route."
            DEFVAL { ospfv3Metric }
            ::= { ospfv3AreaEntry 15 }

    -- OSPFv3 AS-Scope Link State Database

    -- The Link State Database contains the AS-Scope Link State
    -- Advertisements from throughout the areas that the
    -- device is attached to.

    ospfv3AsLsdbTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3AsLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Process's AS-Scope Link State Database."
            ::= { ospfv3Objects 3 }

    ospfv3AsLsdbEntry OBJECT-TYPE
            SYNTAX          Ospfv3AsLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A single AS-Scope Link State Advertisement."
            INDEX           { ospfv3AsLsdbType,
                              ospfv3AsLsdbRouterId,
                              ospfv3AsLsdbLsid }
            ::= { ospfv3AsLsdbTable 1 }

    Ospfv3AsLsdbEntry ::= SEQUENCE {
            ospfv3AsLsdbType
                    Unsigned32,
            ospfv3AsLsdbRouterId
                    Ospfv3RouterIdTc,
            ospfv3AsLsdbLsid
                    Unsigned32,
            ospfv3AsLsdbSequence
                    Integer32,
            ospfv3AsLsdbAge
                    Integer32,
            ospfv3AsLsdbChecksum
                    Integer32,
            ospfv3AsLsdbAdvertisement
                    OCTET STRING,
            ospfv3AsLsdbTypeKnown
                    TruthValue

Internet Draft          Expires February 2007               [Page 18]


                              OSPFv3 MIB                   August 2006


            }

    ospfv3AsLsdbType OBJECT-TYPE
            SYNTAX          Unsigned32(0..'FFFFFFFF'h)
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The type of the link state advertisement.
                Each link state type has a separate
                advertisement format. AS-Scope LSAs not recognized
                by the router may be stored in the database."
            ::= { ospfv3AsLsdbEntry 1 }

    ospfv3AsLsdbRouterId OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The 32 bit number that uniquely identifies the
                originating router in the Autonomous System."
            REFERENCE
                "OSPF Version 2, Appendix C.1 Global parameters"
            ::= { ospfv3AsLsdbEntry 2 }

    ospfv3AsLsdbLsid OBJECT-TYPE
            SYNTAX          Unsigned32
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Link State ID is an LS Type Specific field
                containing a unique identifier;
                it identifies the piece of the routing domain
                that is being described by the advertisement.
                In contrast to OSPFv2, the LSID has no
                addressing semantics."
            ::= { ospfv3AsLsdbEntry 3 }

    -- Note that the OSPF Sequence Number is a 32 bit signed
    -- integer. It starts with the value '80000001'h,
    -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
    -- Thus, a typical sequence number will be very negative.

    ospfv3AsLsdbSequence OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The sequence number field is a signed 32-bit
                integer. It is used to detect old and duplicate
                link state advertisements. The space of
                sequence numbers is linearly ordered. The
                larger the sequence number the more recent the
                advertisement."

Internet Draft          Expires February 2007               [Page 19]


                              OSPFv3 MIB                   August 2006


            REFERENCE
                "OSPF Version  2,  Section  12.1.6  LS  sequence
                number"
            ::= { ospfv3AsLsdbEntry 4 }

    ospfv3AsLsdbAge OBJECT-TYPE
            SYNTAX          Integer32 -- Should be 0..MaxAge
                                      -- unless DoNotAge bit is set
            UNITS           "seconds"
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the age of the link state
                advertisement in seconds."
            REFERENCE
                "OSPF Version 2, Section 12.1.1 LS age"
            ::= { ospfv3AsLsdbEntry 5 }

    ospfv3AsLsdbChecksum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the checksum of the complete
                contents of the advertisement, excepting the
                age field. The age field is excepted so that
                an advertisement's age can be incremented
                without updating the checksum. The checksum
                used is the same that is used for ISO
                connectionless datagrams; it is commonly
                referred to as the Fletcher checksum."
            REFERENCE
                "OSPF Version 2, Section 12.1.7 LS checksum"
            ::= { ospfv3AsLsdbEntry 6 }

    ospfv3AsLsdbAdvertisement OBJECT-TYPE
            SYNTAX          OCTET STRING (SIZE (1..65535))
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The entire Link State Advertisement, including
                its header."
            ::= { ospfv3AsLsdbEntry 7 }

    ospfv3AsLsdbTypeKnown OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates whether the LSA type is recognized by
                this Router."
            ::= { ospfv3AsLsdbEntry 8 }


Internet Draft          Expires February 2007               [Page 20]


                              OSPFv3 MIB                   August 2006



    -- OSPFv3 Area-Scope Link State Database

    -- The Link State Database contains the Area-Scope Link State
    -- Advertisements from throughout the area that the
    -- device is attached to.

    ospfv3AreaLsdbTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3AreaLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Process's Area-Scope Link State Database."
            ::= { ospfv3Objects 4 }

    ospfv3AreaLsdbEntry OBJECT-TYPE
            SYNTAX          Ospfv3AreaLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A single Area-Scope Link State Advertisement."
            INDEX           { ospfv3AreaLsdbAreaId,
                              ospfv3AreaLsdbType,
                              ospfv3AreaLsdbRouterId,
                              ospfv3AreaLsdbLsid }
            ::= { ospfv3AreaLsdbTable 1 }

    Ospfv3AreaLsdbEntry ::= SEQUENCE {
            ospfv3AreaLsdbAreaId
                    Ospfv3AreaIdTc,
            ospfv3AreaLsdbType
                    Unsigned32,
            ospfv3AreaLsdbRouterId
                    Ospfv3RouterIdTc,
            ospfv3AreaLsdbLsid
                    Unsigned32,
            ospfv3AreaLsdbSequence
                    Integer32,
            ospfv3AreaLsdbAge
                    Integer32,
            ospfv3AreaLsdbChecksum
                    Integer32,
            ospfv3AreaLsdbAdvertisement
                    OCTET STRING,
            ospfv3AreaLsdbTypeKnown
                    TruthValue
            }

    ospfv3AreaLsdbAreaId OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION

Internet Draft          Expires February 2007               [Page 21]


                              OSPFv3 MIB                   August 2006


                "The 32-bit identifier of the Area from which the
                LSA was received."
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3AreaLsdbEntry 1 }

    ospfv3AreaLsdbType OBJECT-TYPE
            SYNTAX          Unsigned32(0..'FFFFFFFF'h)
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The type of the link state advertisement.
                Each link state type has a separate
                advertisement format. Area-Scope LSAs unrecognized
                by the router are also stored in this database."
            ::= { ospfv3AreaLsdbEntry 2 }

    ospfv3AreaLsdbRouterId OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The 32-bit number that uniquely identifies the
                originating router in the Autonomous System."
            REFERENCE
                "OSPF Version 2, Appendix C.1 Global parameters"
            ::= { ospfv3AreaLsdbEntry 3 }

    ospfv3AreaLsdbLsid OBJECT-TYPE
            SYNTAX          Unsigned32
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Link State ID is an LS Type Specific field
                containing a unique identifier;
                it identifies the piece of the routing domain
                that is being described by the advertisement.
                In contrast to OSPFv2, the LSID has no
                addressing semantics."
            ::= { ospfv3AreaLsdbEntry 4 }

    -- Note that the OSPF Sequence Number is a 32 bit signed
    -- integer.  It starts with the value '80000001'h,
    -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
    -- Thus, a typical sequence number will be very negative.

    ospfv3AreaLsdbSequence OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The sequence number field is a signed 32-bit
                integer. It is used to detect old and

Internet Draft          Expires February 2007               [Page 22]


                              OSPFv3 MIB                   August 2006


                duplicate link state advertisements. The space
                of sequence numbers is linearly ordered. The
                larger the sequence number the more recent the
                advertisement."
            REFERENCE
                "OSPF Version  2,  Section  12.1.6  LS  sequence
                number"
            ::= { ospfv3AreaLsdbEntry 5 }

    ospfv3AreaLsdbAge OBJECT-TYPE
            SYNTAX          Integer32 -- Should be 0..MaxAge
                                      -- unless DoNotAge bit is set
            UNITS           "seconds"
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the age of the link state
                advertisement in seconds."
            REFERENCE
                "OSPF Version 2, Section 12.1.1 LS age"
            ::= { ospfv3AreaLsdbEntry 6 }

    ospfv3AreaLsdbChecksum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the checksum of the complete
                contents of the advertisement, excepting the
                age field. The age field is excepted so that
                an advertisement's age can be incremented
                without updating the checksum. The checksum
                used is the same that is used for ISO
                connectionless datagrams; it is commonly
                referred to as the Fletcher checksum."
            REFERENCE
                "OSPF Version 2, Section 12.1.7 LS checksum"
            ::= { ospfv3AreaLsdbEntry 7 }

    ospfv3AreaLsdbAdvertisement OBJECT-TYPE
            SYNTAX          OCTET STRING (SIZE (1..65535))
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The entire Link State Advertisement, including
                its header."
            ::= { ospfv3AreaLsdbEntry 8 }

    ospfv3AreaLsdbTypeKnown OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION

Internet Draft          Expires February 2007               [Page 23]


                              OSPFv3 MIB                   August 2006


                "Indicates whether the LSA type is recognized
                by this Router."
            ::= { ospfv3AreaLsdbEntry 9 }

    -- OSPFv3 Link-Scope Link State Database

    -- The Link State Database contains the Link-Scope Link State
    -- Advertisements from the links that the
    -- device is attached to.

    ospfv3LinkLsdbTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3LinkLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Process's Link-Scope Link State Database."
            ::= { ospfv3Objects 5 }

    ospfv3LinkLsdbEntry OBJECT-TYPE
            SYNTAX          Ospfv3LinkLsdbEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A single Link-Scope Link State Advertisement."
            INDEX           { ospfv3LinkLsdbIfIndex,
                              ospfv3LinkLsdbIfInstId,
                              ospfv3LinkLsdbType,
                              ospfv3LinkLsdbRouterId,
                              ospfv3LinkLsdbLsid }
            ::= { ospfv3LinkLsdbTable 1 }

    Ospfv3LinkLsdbEntry ::= SEQUENCE {
            ospfv3LinkLsdbIfIndex
                    InterfaceIndex,
            ospfv3LinkLsdbIfInstId
                    Ospfv3IfInstIdTc,
            ospfv3LinkLsdbType
                    Unsigned32,
            ospfv3LinkLsdbRouterId
                    Ospfv3RouterIdTc,
            ospfv3LinkLsdbLsid
                    Unsigned32,
            ospfv3LinkLsdbSequence
                    Integer32,
            ospfv3LinkLsdbAge
                    Integer32,
            ospfv3LinkLsdbChecksum
                    Integer32,
            ospfv3LinkLsdbAdvertisement
                    OCTET STRING,
            ospfv3LinkLsdbTypeKnown
                    TruthValue
            }

Internet Draft          Expires February 2007               [Page 24]


                              OSPFv3 MIB                   August 2006



    ospfv3LinkLsdbIfIndex OBJECT-TYPE
            SYNTAX         InterfaceIndex
            MAX-ACCESS     not-accessible
            STATUS         current
            DESCRIPTION
                "The identifier of the link from which the LSA
                was received."
            ::= { ospfv3LinkLsdbEntry 1 }

    ospfv3LinkLsdbIfInstId OBJECT-TYPE
            SYNTAX         Ospfv3IfInstIdTc
            MAX-ACCESS     not-accessible
            STATUS         current
            DESCRIPTION
                "The identifier of the interface instance from
                which the LSA was received."
            ::= { ospfv3LinkLsdbEntry 2 }

    ospfv3LinkLsdbType OBJECT-TYPE
            SYNTAX          Unsigned32(0..'FFFFFFFF'h)
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The type of the link state advertisement.
                Each link state type has a separate
                advertisement format. Link-Scope LSAs unrecognized
                by the router are also stored in this database."
            ::= { ospfv3LinkLsdbEntry 3 }

    ospfv3LinkLsdbRouterId OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The 32 bit number that uniquely identifies the
                originating router in the Autonomous System."
            REFERENCE
                "OSPF Version 2, Appendix C.1 Global parameters"
            ::= { ospfv3LinkLsdbEntry 4 }

    ospfv3LinkLsdbLsid OBJECT-TYPE
            SYNTAX        Unsigned32
            MAX-ACCESS    not-accessible
            STATUS        current
            DESCRIPTION
                "The Link State ID is an LS Type Specific field
                containing a unique identifier;
                it identifies the piece of the routing domain
                that is being described by the advertisement.
                In contrast to OSPFv2, the LSID has no
                addressing semantics."
            ::= { ospfv3LinkLsdbEntry 5 }

Internet Draft          Expires February 2007               [Page 25]


                              OSPFv3 MIB                   August 2006



    -- Note that the OSPF Sequence Number is a 32 bit signed
    -- integer.  It starts with the value '80000001'h,
    -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
    -- Thus, a typical sequence number will be very negative.

    ospfv3LinkLsdbSequence OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The sequence number field is a signed 32-bit
                integer. It is used to detect old and duplicate
                link state advertisements. The space of
                sequence numbers is linearly ordered. The
                larger the sequence number the more recent the
                advertisement."
            REFERENCE
                "OSPF Version  2,  Section  12.1.6  LS  sequence
                number"
            ::= { ospfv3LinkLsdbEntry 6 }

    ospfv3LinkLsdbAge OBJECT-TYPE
            SYNTAX          Integer32 -- Should be 0..MaxAge
                                      -- unless DoNotAge bit is set
            UNITS           "seconds"
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the age of the link state
                advertisement in seconds."
            REFERENCE
                "OSPF Version 2, Section 12.1.1 LS age"
            ::= { ospfv3LinkLsdbEntry 7 }

    ospfv3LinkLsdbChecksum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "This field is the checksum of the complete
                contents of the advertisement, excepting the
                age field. The age field is excepted so that
                an advertisement's age can be incremented
                without updating the checksum. The checksum
                used is the same that is used for ISO
                connectionless datagrams; it is commonly
                referred to as the Fletcher checksum."
            REFERENCE
                "OSPF Version 2, Section 12.1.7 LS checksum"
            ::= { ospfv3LinkLsdbEntry 8 }

    ospfv3LinkLsdbAdvertisement OBJECT-TYPE

Internet Draft          Expires February 2007               [Page 26]


                              OSPFv3 MIB                   August 2006


            SYNTAX          OCTET STRING (SIZE (1..65535))
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The entire Link State Advertisement, including
                its header."
            ::= { ospfv3LinkLsdbEntry 9 }

    ospfv3LinkLsdbTypeKnown OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates whether the LSA type is recognized by this
                 Router."
            ::= { ospfv3LinkLsdbEntry 10 }


    -- OSPF Host Table

    -- The Host/Metric Table indicates what hosts are directly
    -- attached to the Router, and what metrics and types of
    -- service should be advertised for them.

    ospfv3HostTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3HostEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The list of Hosts, and their metrics, that the
                router will advertise as host routes."
            REFERENCE
                "OSPF Version 2, Appendix C.6  Host route
                parameters"
            ::= { ospfv3Objects 6 }

    ospfv3HostEntry OBJECT-TYPE
            SYNTAX          Ospfv3HostEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A metric to be advertised when a given host is
                reachable."
            INDEX           { ospfv3HostAddressType,
                              ospfv3HostAddress }
            ::= { ospfv3HostTable 1 }

    Ospfv3HostEntry ::= SEQUENCE {
            ospfv3HostAddressType
                    InetAddressType,
            ospfv3HostAddress
                    InetAddress,
            ospfv3HostMetric

Internet Draft          Expires February 2007               [Page 27]


                              OSPFv3 MIB                   August 2006


                    Metric,
            ospfv3HostStatus
                    RowStatus,
            ospfv3HostAreaID
                    Ospfv3AreaIdTc
            }

    ospfv3HostAddressType OBJECT-TYPE
            SYNTAX          InetAddressType
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The address type of ospfv3HostAddress. Only IPv6
                addresses without zone index are expected."
            REFERENCE
                "OSPF Version 2, Appendix C.6 Host route
                parameters"
            ::= { ospfv3HostEntry 1 }


    ospfv3HostAddress OBJECT-TYPE
            SYNTAX          InetAddress (SIZE (16))
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The IPv6 Address of the Host. Must be a Global
                 address."
            REFERENCE
                "OSPF Version 2, Appendix C.6 Host route
                parameters"
            ::= { ospfv3HostEntry 2 }

    ospfv3HostMetric OBJECT-TYPE
            SYNTAX          Metric
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The Metric to be advertised."
            REFERENCE
                "OSPF Version 2, Appendix C.6 Host route
                parameters"
            ::= { ospfv3HostEntry 3 }

    ospfv3HostStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on

Internet Draft          Expires February 2007               [Page 28]


                              OSPFv3 MIB                   August 2006


                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3HostEntry 4 }

    ospfv3HostAreaID OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The Area the Host Entry is to be found within.
                By default, the area that a subsuming OSPFv3
                interface is in, or Area 0"
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3HostEntry 5 }

    -- OSPFv3 Interface Table

    ospfv3IfTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3IfEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Interface Table describes the
                interfaces from the viewpoint of OSPFv3."
            REFERENCE
                "OSPF Version 2, Appendix C.3 Router interface
                parameters"
            ::= { ospfv3Objects 7 }

    ospfv3IfEntry OBJECT-TYPE
            SYNTAX          Ospfv3IfEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Interface Entry describes one
                interface from the viewpoint of OSPFv3."
            INDEX           { ospfv3IfIndex,
                              ospfv3IfInstId }
            ::= { ospfv3IfTable 1 }


    Ospfv3IfEntry ::= SEQUENCE {
            ospfv3IfIndex
                    InterfaceIndex,
            ospfv3IfInstId
                    Ospfv3IfInstIdTc,
            ospfv3IfAreaId
                    Ospfv3AreaIdTc,
            ospfv3IfType
                    INTEGER,
            ospfv3IfAdminStat
                    Status,

Internet Draft          Expires February 2007               [Page 29]


                              OSPFv3 MIB                   August 2006


            ospfv3IfRtrPriority
                    DesignatedRouterPriority,
            ospfv3IfTransitDelay
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3IfRetransInterval
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3IfHelloInterval
                    HelloRange,
            ospfv3IfRtrDeadInterval
                     Ospfv3DeadIntRangeTc,
            ospfv3IfPollInterval
                    Unsigned32,
            ospfv3IfState
                    INTEGER,
            ospfv3IfDesignatedRouter
                    Ospfv3RouterIdTc,
            ospfv3IfBackupDesignatedRouter
                    Ospfv3RouterIdTc,
            ospfv3IfEvents
                    Counter32,
            ospfv3IfStatus
                    RowStatus,
            ospfv3IfMulticastForwarding
                    INTEGER,
            ospfv3IfDemand
                    TruthValue,
            ospfv3IfMetricValue
                    Metric,
            ospfv3IfLinkScopeLsaCount
                    Gauge32,
            ospfv3IfLinkLsaCksumSum
                    Integer32,
            ospfv3IfDemandNbrProbe
                    TruthValue,
            ospfv3IfDemandNbrProbeRetxLimit
                    Unsigned32,
            ospfv3IfDemandNbrProbeInterval
                    Unsigned32
            }

    ospfv3IfIndex OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The interface index of this OSPFv3 interface.
                 It corresponds to the interface index of the
                 IPv6 interface on which OSPFv3 is configured."
            ::= { ospfv3IfEntry 1 }

    ospfv3IfInstId OBJECT-TYPE
            SYNTAX          Ospfv3IfInstIdTc
            MAX-ACCESS      not-accessible

Internet Draft          Expires February 2007               [Page 30]


                              OSPFv3 MIB                   August 2006


            STATUS          current
            DESCRIPTION
                "Enables multiple interface instances of OSPFv3
                to be run over a single link. Each protocol
                instance would be assigned a separate ID. This ID
                has local link significance only."
            ::= { ospfv3IfEntry 2 }

    ospfv3IfAreaId OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "A 32-bit integer uniquely identifying the area
                to which the interface connects. Area ID
                0 is used for the OSPFv3 backbone."
            DEFVAL          { 0 }
            ::= { ospfv3IfEntry 3 }

    ospfv3IfType OBJECT-TYPE
            SYNTAX          INTEGER {
                            broadcast(1),
                            nbma(2),
                            pointToPoint(3),
                            pointToMultipoint(5)
                            }
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The OSPFv3 interface type."
            ::= { ospfv3IfEntry 4 }

    ospfv3IfAdminStat OBJECT-TYPE
            SYNTAX          Status
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The OSPFv3 interface's administrative status.
                The value formed on the interface, and the
                interface will be advertised as an internal route
                to some area. The value 'disabled' denotes
                that the interface is external to OSPFv3."
            DEFVAL          { enabled }
            ::= { ospfv3IfEntry 5 }

    ospfv3IfRtrPriority OBJECT-TYPE
            SYNTAX          DesignatedRouterPriority
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The priority of this interface. Used in
                multi-access networks, this field is used in
                the designated router election algorithm. The

Internet Draft          Expires February 2007               [Page 31]


                              OSPFv3 MIB                   August 2006


                value 0 signifies that the router is not
                eligible to become the designated router on this
                particular network. In the event of a tie in
                this value, routers will use their Router ID as
                a tie breaker."
            DEFVAL          { 1 }
            ::= { ospfv3IfEntry 6 }

    ospfv3IfTransitDelay OBJECT-TYPE
            SYNTAX          Ospfv3UpToRefreshIntervalTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The estimated number of seconds it takes to
                transmit a link state update packet over this
                interface."
            DEFVAL          { 1 }
            ::= { ospfv3IfEntry 7 }

    ospfv3IfRetransInterval OBJECT-TYPE
            SYNTAX          Ospfv3UpToRefreshIntervalTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The number of seconds between link state
                advertisement retransmissions, for adjacencies
                belonging to this interface. This value is
                also used when retransmitting database
                description and link state request packets."
            DEFVAL          { 5 }
            ::= { ospfv3IfEntry 8 }

    ospfv3IfHelloInterval OBJECT-TYPE
            SYNTAX          HelloRange
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The length of time, in seconds, between the
                Hello packets that the router sends on the
                interface. This value must be the same for all
                routers attached to a common network."
            DEFVAL          { 10 }
            ::= { ospfv3IfEntry 9 }

    ospfv3IfRtrDeadInterval OBJECT-TYPE
            SYNTAX          Ospfv3DeadIntRangeTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION

Internet Draft          Expires February 2007               [Page 32]


                              OSPFv3 MIB                   August 2006


                "The number of seconds that a router's Hello
                packets have not been seen before its
                neighbors declare the router down on the interface.
                This should be some multiple of the Hello interval.
                This value must be the same for all routers attached
                to a common network."
            DEFVAL          { 40 }
            ::= { ospfv3IfEntry 10 }

    ospfv3IfPollInterval OBJECT-TYPE
            SYNTAX          Unsigned32
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The larger time interval, in seconds, between
                the Hello packets sent to an inactive
                non-broadcast multi-access neighbor."
            DEFVAL          { 120 }
            ::= { ospfv3IfEntry 11 }

    ospfv3IfState OBJECT-TYPE
            SYNTAX          INTEGER {
                            down(1),
                            loopback(2),
                            waiting(3),
                            pointToPoint(4),
                            designatedRouter(5),
                            backupDesignatedRouter(6),
                            otherDesignatedRouter(7)
                            }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The OSPFv3 Interface State."
            ::= { ospfv3IfEntry 12 }

    ospfv3IfDesignatedRouter OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The Router ID of the Designated Router."
            ::= { ospfv3IfEntry 13 }

    ospfv3IfBackupDesignatedRouter OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The Router ID of the Backup Designated
                Router."
            ::= { ospfv3IfEntry 14 }

Internet Draft          Expires February 2007               [Page 33]


                              OSPFv3 MIB                   August 2006



    ospfv3IfEvents OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of times this OSPF interface has
                changed its state, or an error has occurred."
            ::= { ospfv3IfEntry 15 }

     ospfv3IfStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on
                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3IfEntry 16 }

    ospfv3IfMulticastForwarding OBJECT-TYPE
            SYNTAX          INTEGER {
                            blocked(1),   -- no multicast forwarding
                            multicast(2), -- using multicast address
                            unicast(3)    -- to each OSPFv3 neighbor
                            }
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The way multicasts should forwarded on this
                interface; not forwarded, forwarded as data
                link multicasts, or forwarded as data link
                unicasts. Data link multicasting is not
                meaningful on point to point and NBMA interfaces,
                and setting ospfv3MulticastForwarding to 0
                effectively disables all multicast forwarding."
            DEFVAL { blocked }
            ::= { ospfv3IfEntry 17 }

    ospfv3IfDemand OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "Indicates whether Demand OSPFv3 procedures
                (hello suppression to FULL neighbors and
                setting the DoNotAge flag on propagated LSAs)
                should be performed on this interface."
            DEFVAL { false }

Internet Draft          Expires February 2007               [Page 34]


                              OSPFv3 MIB                   August 2006


            ::= { ospfv3IfEntry 18 }

    ospfv3IfMetricValue OBJECT-TYPE
            SYNTAX          Metric
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The metric assigned to this interface.
                 The default value of the Metric is
                Reference Bandwidth / ifSpeed. The value
                of the reference bandwidth is configured
                by the ospfv3ReferenceBandwidth object."
            ::= { ospfv3IfEntry 19 }

     ospfv3IfLinkScopeLsaCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The total number of Link-Scope link state
                advertisements in this link's link state
                database."
            ::= { ospfv3IfEntry 20 }

     ospfv3IfLinkLsaCksumSum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The 32-bit unsigned sum of the Link-Scope link state
                advertisements' LS checksums contained in this
                link's link state database. The sum can be used
                to determine if there has been a change in a
                router's link state database, and to compare the
                link state database of two routers."
            ::= { ospfv3IfEntry 21 }

    ospfv3IfDemandNbrProbe OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                   "Indicates whether or not neighbor probing is
                   enabled to determine whether or not the neighbor
                   is inactive. Neighbor probing is disabled by
                   default."
            DEFVAL { false }
            ::= { ospfv3IfEntry 22 }

   ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
           SYNTAX       Unsigned32
           UNITS        "seconds"
           MAX-ACCESS   read-create

Internet Draft          Expires February 2007               [Page 35]


                              OSPFv3 MIB                   August 2006


           STATUS       current
           DESCRIPTION
              "The number of consecutive LSA retransmissions before
              the neighbor is deemed inactive and the neighbor
              adjacency is brought down."
           DEFVAL          { 10 }
           ::= { ospfv3IfEntry 23}


   ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
           SYNTAX       Unsigned32
           UNITS        "seconds"
           MAX-ACCESS   read-create
           STATUS       current
           DESCRIPTION
              "Defines how often the neighbor will be probed."
           DEFVAL          { 120 }
           ::= { ospfv3IfEntry 24 }


    -- OSPFv3 Virtual Interface Table

    -- The Virtual Interface Table describes the virtual
    -- links that the OSPFv3 Process is configured to
    -- carry on.

    ospfv3VirtIfTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3VirtIfEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Information about this router's virtual
                interfaces."
            REFERENCE
                "OSPF Version 2, Appendix C.4 Virtual link
                parameters"
            ::= { ospfv3Objects 8 }

    ospfv3VirtIfEntry OBJECT-TYPE
            SYNTAX          Ospfv3VirtIfEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Information about a single Virtual Interface."
            INDEX           { ospfv3VirtIfAreaId,
                              ospfv3VirtIfNeighbor }
            ::= { ospfv3VirtIfTable 1 }

    Ospfv3VirtIfEntry ::= SEQUENCE {
            ospfv3VirtIfAreaId
                    Ospfv3AreaIdTc,
            ospfv3VirtIfNeighbor
                    Ospfv3RouterIdTc,

Internet Draft          Expires February 2007               [Page 36]


                              OSPFv3 MIB                   August 2006


            ospfv3VirtIfIndex
                    InterfaceIndex,
            ospfv3VirtIfInstId
                    Ospfv3IfInstIdTc,
            ospfv3VirtIfTransitDelay
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3VirtIfRetransInterval
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3VirtIfHelloInterval
                    HelloRange,
            ospfv3VirtIfRtrDeadInterval
                    Ospfv3DeadIntRangeTc,
            ospfv3VirtIfState
                    INTEGER,
            ospfv3VirtIfEvents
                    Counter32,
            ospfv3VirtIfStatus
                    RowStatus,
            ospfv3VirtIfLinkScopeLsaCount
                    Gauge32,
            ospfv3VirtIfLinkLsaCksumSum
                    Integer32
            }

    ospfv3VirtIfAreaId OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Transit Area that the Virtual Link
                traverses. By definition, this is not
                Area 0"
            ::= { ospfv3VirtIfEntry 1 }

    ospfv3VirtIfNeighbor OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Router ID of the Virtual Neighbor."
            ::= { ospfv3VirtIfEntry 2 }

    ospfv3VirtIfIndex OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The local interface index assigned to this
                OSPFv3 virtual interface. It is advertised in
                Hello's sent over the virtal link and in the
                router's router-LSAs."
            ::= { ospfv3VirtIfEntry 3 }


Internet Draft          Expires February 2007               [Page 37]


                              OSPFv3 MIB                   August 2006


    ospfv3VirtIfInstId OBJECT-TYPE
            SYNTAX          Ospfv3IfInstIdTc
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "Specifies the interface instance ID to be used
                for the virtual interface. This ID has local link
                significance only."
            DEFVAL          { 0 }
            ::= { ospfv3VirtIfEntry 4 }

    ospfv3VirtIfTransitDelay OBJECT-TYPE
            SYNTAX          Ospfv3UpToRefreshIntervalTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The estimated number of seconds it takes to
                transmit a link state update packet over this
                interface."
            DEFVAL          { 1 }
            ::= { ospfv3VirtIfEntry 5 }

    ospfv3VirtIfRetransInterval OBJECT-TYPE
            SYNTAX          Ospfv3UpToRefreshIntervalTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The number of seconds between link state
                advertisement retransmissions, for adjacencies
                belonging to this interface. This value is
                also used when retransmitting database
                description and link state request packets. This
                value should be well over the expected
                round-trip time."
            DEFVAL          { 5 }
            ::= { ospfv3VirtIfEntry 6 }

    ospfv3VirtIfHelloInterval OBJECT-TYPE
            SYNTAX          HelloRange
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The length of time, in seconds, between the
                Hello packets that the router sends on the
                interface.  This value must be the same for the
                virtual neighbor."
            DEFVAL          { 10 }
            ::= { ospfv3VirtIfEntry 7 }

    ospfv3VirtIfRtrDeadInterval OBJECT-TYPE

Internet Draft          Expires February 2007               [Page 38]


                              OSPFv3 MIB                   August 2006


            SYNTAX          Ospfv3DeadIntRangeTc
            UNITS           "seconds"
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The number of seconds that a router's Hello
                packets have not been seen before its
                neighbors declare the router down. This should
                be some multiple of the Hello interval. This
                value must be the same for the virtual
                neighbor."
            DEFVAL          { 60 }
            ::= { ospfv3VirtIfEntry 8 }

    ospfv3VirtIfState OBJECT-TYPE
            SYNTAX          INTEGER {
                            down(1),
                            pointToPoint(4)
                            }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "OSPF virtual interface states. The same encoding
                as the ospfV3IfTable is used."
            ::= { ospfv3VirtIfEntry 9 }

    ospfv3VirtIfEvents OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of state changes or error events on
                this Virtual Link"
            ::= { ospfv3VirtIfEntry 10 }

    ospfv3VirtIfStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on
                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3VirtIfEntry 11 }

    ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current

Internet Draft          Expires February 2007               [Page 39]


                              OSPFv3 MIB                   August 2006


            DESCRIPTION
                "The total number of Link-Scope link state
                advertisements in this virtual link's link state
                database."
            ::= { ospfv3VirtIfEntry 12 }

    ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The 32-bit unsigned sum of the Link-Scope link-state
                advertisements' LS checksums contained in this
                virtual link's link-state database. The sum can be used
                to determine if there has been a change in a
                router's link state database, and to compare the
                link state database of two routers."
            ::= { ospfv3VirtIfEntry 13 }


    -- OSPFv3 Neighbor Table

    -- The OSPFv3 Neighbor Table describes all neighbors in
    -- the locality of the subject router.

    ospfv3NbrTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3NbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A table of non-virtual neighbor information."
            REFERENCE
                "OSPF Version 2, Section 10 The Neighbor Data
                Structure"
            ::= { ospfv3Objects 9 }

    ospfv3NbrEntry OBJECT-TYPE
            SYNTAX          Ospfv3NbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The information regarding a single neighbor."
            REFERENCE
                "OSPF Version 2, Section 10 The Neighbor Data
                Structure"
            INDEX           { ospfv3NbrIfIndex,
                              ospfv3NbrIfInstId,
                              ospfv3NbrRtrId }
            ::= { ospfv3NbrTable 1 }

    Ospfv3NbrEntry ::= SEQUENCE {
            ospfv3NbrIfIndex
                    InterfaceIndex,

Internet Draft          Expires February 2007               [Page 40]


                              OSPFv3 MIB                   August 2006


            ospfv3NbrIfInstId
                    Ospfv3IfInstIdTc,
            ospfv3NbrRtrId
                    Ospfv3RouterIdTc,
            ospfv3NbrAddressType
                    InetAddressType,
            ospfv3NbrAddress
                    InetAddress,
            ospfv3NbrOptions
                    Integer32,
            ospfv3NbrPriority
                    DesignatedRouterPriority,
            ospfv3NbrState
                    INTEGER,
            ospfv3NbrEvents
                    Counter32,
            ospfv3NbrLsRetransQLen
                    Gauge32,
            ospfv3NbrHelloSuppressed
                    TruthValue,
            ospfv3NbrIfId
                    InterfaceIndex,
            ospfv3NbrRestartHelperStatus
                    INTEGER,
            ospfv3NbrRestartHelperAge
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3NbrRestartHelperExitRc
                    INTEGER
            }

    ospfv3NbrIfIndex OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The local link ID of the link over which the
                 neighbor can be reached."
            ::= { ospfv3NbrEntry 1 }

    ospfv3NbrIfInstId OBJECT-TYPE
            SYNTAX          Ospfv3IfInstIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Interface instance over which the neighbor
                can be reached. This ID has local link
                significance only."
            ::= { ospfv3NbrEntry 2 }

    ospfv3NbrRtrId OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current

Internet Draft          Expires February 2007               [Page 41]


                              OSPFv3 MIB                   August 2006


            DESCRIPTION
               "A 32-bit integer uniquely identifying the neighboring
               router in the Autonomous System."
            ::= { ospfv3NbrEntry 3 }

    ospfv3NbrAddressType OBJECT-TYPE
            SYNTAX          InetAddressType
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The address type of ospfv3NbrAddress. Only IPv6
                addresses without zone index are expected."
            ::= { ospfv3NbrEntry 4 }

    ospfv3NbrAddress OBJECT-TYPE
            SYNTAX          InetAddress (SIZE (16))
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The IPv6 address of the neighbor associated with
                the local link."
            ::= { ospfv3NbrEntry 5 }

    ospfv3NbrOptions OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "A Bit Mask corresponding to the neighbor's
                options field."
            REFERENCE
                "OSPF Version 3, Appendix A.2 the Options field"
            ::= { ospfv3NbrEntry 6 }

    ospfv3NbrPriority OBJECT-TYPE
            SYNTAX          DesignatedRouterPriority
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The priority of this neighbor in the designated
                router election algorithm. The value 0 signifies
                that the neighbor is not eligible to become the
                designated router on this particular network."
            ::= { ospfv3NbrEntry 7 }

    ospfv3NbrState OBJECT-TYPE
            SYNTAX          INTEGER {
                            down(1),
                            attempt(2),
                            init(3),
                            twoWay(4),
                            exchangeStart(5),
                            exchange(6),

Internet Draft          Expires February 2007               [Page 42]


                              OSPFv3 MIB                   August 2006


                            loading(7),
                            full(8)
                            }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The State of the relationship with this
                Neighbor."
            REFERENCE
                "OSPF Version 2, Section 10.1 Neighbor States"
            ::= { ospfv3NbrEntry 8 }

    ospfv3NbrEvents OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of times this neighbor relationship
                has changed state, or an error has occurred."
            ::= { ospfv3NbrEntry 9 }

    ospfv3NbrLsRetransQLen OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The current length of the retransmission
                queue."
            ::= { ospfv3NbrEntry 10 }

    ospfv3NbrHelloSuppressed OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates whether Hellos are being suppressed
                to the neighbor"
            ::= { ospfv3NbrEntry 11 }

    ospfv3NbrIfId OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The interface ID that the neighbor advertises
                in its Hello Packets on this link, that is, the
                neighbor's local interface index."
            ::= { ospfv3NbrEntry 12 }

    ospfv3NbrRestartHelperStatus OBJECT-TYPE
           SYNTAX       INTEGER { notHelping (1),
                                  helping (2)
                                }

Internet Draft          Expires February 2007               [Page 43]


                              OSPFv3 MIB                   August 2006


           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Indicates whether the router is acting
              as a Graceful restart helper for the neighbor."
              ::= { ospfv3NbrEntry 13 }

    ospfv3NbrRestartHelperAge OBJECT-TYPE
           SYNTAX       Ospfv3UpToRefreshIntervalTc
           UNITS        "seconds"
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Remaining time in current OSPF Graceful restart
              interval, if the router is acting as a restart
              helper for the neighbor."
           ::= { ospfv3NbrEntry 14 }

    ospfv3NbrRestartHelperExitRc OBJECT-TYPE
           SYNTAX       INTEGER { none (1),
                                  inProgress (2),
                                  completed (3),
                                  timedOut (4),
                                  topologyChanged (5)
                                }
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Describes the outcome of the last attempt at acting
              as a Graceful restart helper for the neighbor.

              none:............no restart has yet been attempted.
              inProgress:......a restart attempt is currently underway.
              completed:.......the last restart completed successfully.
              timedOut:........the last restart timed out.
              topologyChanged:.the last restart was aborted due to
                               a topology change."
        ::= { ospfv3NbrEntry 15 }


    -- OSPFv3 Configured Neighbor Table

    -- The OSPFv3 Configured Neighbor Table describes all configured
    -- neighbors

    ospfv3CfgNbrTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3CfgNbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A table of configured, non-virtual neighbor
                information."
            REFERENCE

Internet Draft          Expires February 2007               [Page 44]


                              OSPFv3 MIB                   August 2006


                "OSPF Version 2, Section 10 The Neighbor Data
                Structure"
            ::= { ospfv3Objects 10 }

    ospfv3CfgNbrEntry OBJECT-TYPE
            SYNTAX          Ospfv3CfgNbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The information regarding a single configured
                neighbor or neighbor discovered by lower-level
                protocols such as Inverse Neighbor Discovery."
            REFERENCE
                "OSPF Version 2, Section 10 The Neighbor Data
                Structure"
            INDEX           { ospfv3CfgNbrIfIndex,
                              ospfv3CfgNbrIfInstId,
                              ospfv3CfgNbrAddressType,
                              ospfv3CfgNbrAddress }
            ::= { ospfv3CfgNbrTable 1 }

    Ospfv3CfgNbrEntry ::= SEQUENCE {
            ospfv3CfgNbrIfIndex
                    InterfaceIndex,
            ospfv3CfgNbrIfInstId
                    Ospfv3IfInstIdTc,
            ospfv3CfgNbrAddressType
                    InetAddressType,
            ospfv3CfgNbrAddress
                    InetAddress,
            ospfv3CfgNbrPriority
                    DesignatedRouterPriority,
            ospfv3CfgNbrStatus
                    RowStatus
            }

    ospfv3CfgNbrIfIndex OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The local link ID of the link over which the
                 neighbor can be reached."
            ::= { ospfv3CfgNbrEntry 1 }

    ospfv3CfgNbrIfInstId OBJECT-TYPE
            SYNTAX          Ospfv3IfInstIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Interface instance over which the neighbor
                can be reached. This ID has local link
                significance only."

Internet Draft          Expires February 2007               [Page 45]


                              OSPFv3 MIB                   August 2006


            ::= { ospfv3CfgNbrEntry 2 }

    ospfv3CfgNbrAddressType OBJECT-TYPE
            SYNTAX          InetAddressType
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The address type of ospfv3NbrAddress. Only IPv6
                addresses without zone index are expected."
            ::= { ospfv3CfgNbrEntry 3 }

    ospfv3CfgNbrAddress OBJECT-TYPE
            SYNTAX          InetAddress (SIZE (16))
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The IPv6 address of the neighbor associated with
                the local link."
            ::= { ospfv3CfgNbrEntry 4 }

    ospfv3CfgNbrPriority OBJECT-TYPE
            SYNTAX          DesignatedRouterPriority
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "The priority of this neighbor in the designated
                router election algorithm. The value 0 signifies
                that the neighbor is not eligible to become the
                designated router on this particular network."
            DEFVAL          { 1 }
            ::= { ospfv3CfgNbrEntry 5 }

    ospfv3CfgNbrStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on
                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3CfgNbrEntry 6 }

    -- OSPFv3 Virtual Neighbor Table

    -- This table describes all virtual neighbors.
    -- Since Virtual Links are configured in the
    -- virtual interface table, this table is read-only.

    ospfv3VirtNbrTable OBJECT-TYPE

Internet Draft          Expires February 2007               [Page 46]


                              OSPFv3 MIB                   August 2006


            SYNTAX          SEQUENCE OF Ospfv3VirtNbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A table of virtual neighbor information."
            REFERENCE
                "OSPF Version 2, Section 15 Virtual Links"
            ::= { ospfv3Objects 11 }

    ospfv3VirtNbrEntry OBJECT-TYPE
            SYNTAX          Ospfv3VirtNbrEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "Virtual neighbor information."
            INDEX           { ospfv3VirtNbrArea,
                              ospfv3VirtNbrRtrId }
            ::= { ospfv3VirtNbrTable 1 }

    Ospfv3VirtNbrEntry ::= SEQUENCE {
            ospfv3VirtNbrArea
                    Ospfv3AreaIdTc,
            ospfv3VirtNbrRtrId
                    Ospfv3RouterIdTc,
            ospfv3VirtNbrIfIndex
                    InterfaceIndex,
            ospfv3VirtNbrIfInstId
                    Ospfv3IfInstIdTc,
            ospfv3VirtNbrAddressType
                    InetAddressType,
            ospfv3VirtNbrAddress
                    InetAddress,
            ospfv3VirtNbrOptions
                    Integer32,
            ospfv3VirtNbrState
                    INTEGER,
            ospfv3VirtNbrEvents
                    Counter32,
            ospfv3VirtNbrLsRetransQLen
                    Gauge32,
            ospfv3VirtNbrHelloSuppressed
                    TruthValue,
            ospfv3VirtNbrIfId
                    InterfaceIndex,
            ospfv3VirtNbrRestartHelperStatus
                    INTEGER,
            ospfv3VirtNbrRestartHelperAge
                    Ospfv3UpToRefreshIntervalTc,
            ospfv3VirtNbrRestartHelperExitRc
                    INTEGER
            }

    ospfv3VirtNbrArea OBJECT-TYPE

Internet Draft          Expires February 2007               [Page 47]


                              OSPFv3 MIB                   August 2006


            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Transit Area Identifier."
            ::= { ospfv3VirtNbrEntry 1 }

    ospfv3VirtNbrRtrId OBJECT-TYPE
            SYNTAX          Ospfv3RouterIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A 32-bit integer uniquely identifying the
                neighboring router in the Autonomous System."
            ::= { ospfv3VirtNbrEntry 2 }

    ospfv3VirtNbrIfIndex OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The local interface ID for the virtual link over
                which the neighbor can be reached."
            ::= { ospfv3VirtNbrEntry 3 }

    ospfv3VirtNbrIfInstId OBJECT-TYPE
            SYNTAX          Ospfv3IfInstIdTc
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The interface instance for the virtual link over
                which the neighbor can be reached."
            ::= { ospfv3VirtNbrEntry 4 }

    ospfv3VirtNbrAddressType OBJECT-TYPE
            SYNTAX          InetAddressType
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The address type of ospfv3VirtNbrAddress. Only IPv6
                addresses without zone index are expected."
            ::= { ospfv3VirtNbrEntry 5 }

    ospfv3VirtNbrAddress OBJECT-TYPE
            SYNTAX          InetAddress (SIZE (16))
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The IPv6 address advertised by this Virtual Neighbor.
                It must be a Global scope address."
            ::= { ospfv3VirtNbrEntry 6 }

    ospfv3VirtNbrOptions OBJECT-TYPE

Internet Draft          Expires February 2007               [Page 48]


                              OSPFv3 MIB                   August 2006


            SYNTAX          Integer32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "A Bit Mask corresponding to the neighbor's options
                field."
            REFERENCE
                "OSPF Version 3, Appendix A.2 the Options field"
            ::= { ospfv3VirtNbrEntry 7 }

    ospfv3VirtNbrState OBJECT-TYPE
            SYNTAX          INTEGER {
                            down(1),
                            attempt(2),
                            init(3),
                            twoWay(4),
                            exchangeStart(5),
                            exchange(6),
                            loading(7),
                            full(8)
                            }
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The state of the Virtual Neighbor Relationship."
            ::= { ospfv3VirtNbrEntry 8 }

    ospfv3VirtNbrEvents OBJECT-TYPE
            SYNTAX          Counter32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The number of times this virtual link has
                changed its state, or an error has occurred."
            ::= { ospfv3VirtNbrEntry 9 }

    ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
            SYNTAX          Gauge32
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The current length of the retransmission
                queue."
            ::= { ospfv3VirtNbrEntry 10 }

    ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
            SYNTAX          TruthValue
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "Indicates whether Hellos are being suppressed
                to the neighbor"
            ::= { ospfv3VirtNbrEntry 11 }

Internet Draft          Expires February 2007               [Page 49]


                              OSPFv3 MIB                   August 2006



    ospfv3VirtNbrIfId OBJECT-TYPE
            SYNTAX          InterfaceIndex
            MAX-ACCESS      read-only
            STATUS          current
            DESCRIPTION
                "The interface ID that the neighbor advertises
                in its Hello Packets on this virtual link, that is,
                the neighbor's local interface ID."
            ::= { ospfv3VirtNbrEntry 12 }

   ospfv3VirtNbrRestartHelperStatus OBJECT-TYPE
           SYNTAX       INTEGER { notHelping (1),
                                  helping (2)
                                }
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Indicates whether the router is acting
              as a Graceful restart helper for the neighbor."
              ::= { ospfv3VirtNbrEntry 13 }

    ospfv3VirtNbrRestartHelperAge OBJECT-TYPE
           SYNTAX       Ospfv3UpToRefreshIntervalTc
           UNITS        "seconds"
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Remaining time in current OSPF Graceful restart
              interval, if the router is acting as a restart
              helper for the neighbor."
           ::= { ospfv3VirtNbrEntry 14 }

    ospfv3VirtNbrRestartHelperExitRc OBJECT-TYPE
           SYNTAX       INTEGER { none (1),
                                  inProgress (2),
                                  completed (3),
                                  timedOut (4),
                                  topologyChanged (5)
                                }
           MAX-ACCESS   read-only
           STATUS       current
           DESCRIPTION
              "Describes the outcome of the last attempt at acting
               as a Graceful restart helper for the neighbor.

              none:............no restart has yet been attempted.
              inProgress:......a restart attempt is currently underway.
              completed:.......the last restart completed successfully.
              timedOut:........the last restart timed out.
              topologyChanged:.the last restart was aborted due to
                               a topology change."
        ::= { ospfv3VirtNbrEntry 15 }

Internet Draft          Expires February 2007               [Page 50]


                              OSPFv3 MIB                   August 2006




    --
    -- The OSPFv3 Area Aggregate Table
    --

    ospfv3AreaAggregateTable OBJECT-TYPE
            SYNTAX          SEQUENCE OF Ospfv3AreaAggregateEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A range of IPv6 prefixes specified by a
                prefix/prefix length pair. Note that if
                ranges are configured such that one range
                subsumes another range the most specific
                match is the preferred one."
            ::= { ospfv3Objects 12 }

    ospfv3AreaAggregateEntry OBJECT-TYPE
            SYNTAX          Ospfv3AreaAggregateEntry
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "A range of IPv6 prefixes specified by a
                prefix/prefix length pair. Note that if
                ranges are configured such that one range
                subsumes another range the most specific match is
                the preferred one."
            REFERENCE
                "OSPF Version 2, Appendix C.2  Area parameters"
            INDEX           { ospfv3AreaAggregateAreaID,
                              ospfv3AreaAggregateAreaLsdbType,
                              ospfv3AreaAggregatePrefixType,
                              ospfv3AreaAggregatePrefix,
                              ospfv3AreaAggregatePrefixLength }
            ::= { ospfv3AreaAggregateTable 1 }

    Ospfv3AreaAggregateEntry ::= SEQUENCE {
            ospfv3AreaAggregateAreaID
                    Ospfv3AreaIdTc,
            ospfv3AreaAggregateAreaLsdbType
                    INTEGER,
            ospfv3AreaAggregatePrefixType
                    InetAddressType,
            ospfv3AreaAggregatePrefix
                    InetAddress,
            ospfv3AreaAggregatePrefixLength
                    InetAddressPrefixLength,
            ospfv3AreaAggregateStatus
                    RowStatus,
            ospfv3AreaAggregateEffect
                    INTEGER,
            ospfv3AreaAggregateRouteTag

Internet Draft          Expires February 2007               [Page 51]


                              OSPFv3 MIB                   August 2006


                    INTEGER
            }

    ospfv3AreaAggregateAreaID OBJECT-TYPE
            SYNTAX          Ospfv3AreaIdTc
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The Area the Address Aggregate is to be found
                within."
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3AreaAggregateEntry 1 }

    ospfv3AreaAggregateAreaLsdbType OBJECT-TYPE
            SYNTAX          INTEGER {
                            interAreaPrefixLsa(8195), -- 0x2003
                            nssaExternalLsa(8199)     -- 0x2007
                            }
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The type of the Address Aggregate.  This field
                specifies the Area Lsdb type that this Address
                Aggregate applies to."
            REFERENCE
                "OSPF Version 2, Appendix A.4.1 The Link State
                Advertisement header"
            ::= { ospfv3AreaAggregateEntry 2 }

    ospfv3AreaAggregatePrefixType OBJECT-TYPE
            SYNTAX          InetAddressType
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The prefix type of ospfv3AreaAggregatePrefix. Only
                IPv6 addresses are expected."
            ::= { ospfv3AreaAggregateEntry 4 }

    ospfv3AreaAggregatePrefix OBJECT-TYPE
            SYNTAX          InetAddress (SIZE (0..16))
            MAX-ACCESS      not-accessible
            STATUS          current
            DESCRIPTION
                "The IPv6 Prefix."
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3AreaAggregateEntry 5 }

    ospfv3AreaAggregatePrefixLength OBJECT-TYPE
            SYNTAX          InetAddressPrefixLength (3..128)
            UNITS           "bits"
            MAX-ACCESS      not-accessible

Internet Draft          Expires February 2007               [Page 52]


                              OSPFv3 MIB                   August 2006


            STATUS          current
            DESCRIPTION
                "The length of the prefix (in bits). A prefix can
                not be shorter than 3 bits."
            REFERENCE
                "OSPF Version 2, Appendix C.2 Area parameters"
            ::= { ospfv3AreaAggregateEntry 6 }

    ospfv3AreaAggregateStatus OBJECT-TYPE
            SYNTAX          RowStatus
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This object permits management of the table by
                facilitating actions such as row creation,
                construction and destruction.

                The value of this object has no effect on
                whether other objects in this conceptual row can be
                modified."
            ::= { ospfv3AreaAggregateEntry 7 }

    ospfv3AreaAggregateEffect OBJECT-TYPE
            SYNTAX          INTEGER {
                            advertiseMatching(1),
                            doNotAdvertiseMatching(2)
                            }
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "Prefixes subsumed by ranges either trigger the
                advertisement of the indicated aggregate
                (advertiseMatching), or result in the prefix not
                being advertised at all outside the area."
            DEFVAL          { advertiseMatching }
            ::= { ospfv3AreaAggregateEntry 8 }

    ospfv3AreaAggregateRouteTag OBJECT-TYPE
            SYNTAX          Integer32
            MAX-ACCESS      read-create
            STATUS          current
            DESCRIPTION
                "This tag is advertised only in the summarized
                 As-External LSA when summarizing from NSSA-LSA's to
                 AS-External-LSA's."
            DEFVAL         { 0 }
            ::= { ospfv3AreaAggregateEntry 9 }



    -- The Ospfv3 Notification Table

    -- The Ospfv3 Notification Table records fields that are

Internet Draft          Expires February 2007               [Page 53]


                              OSPFv3 MIB                   August 2006


    -- required for notifications

    ospfv3NotificationEntry OBJECT IDENTIFIER
            ::= { ospfv3Objects 13 }

    ospfv3ConfigErrorType OBJECT-TYPE
        SYNTAX       INTEGER {
                        badVersion (1),
                        areaMismatch (2),
                        unknownNbmaNbr (3), -- Router is DR eligible
                        unknownVirtualNbr (4),
                        helloIntervalMismatch (5),
                        deadIntervalMismatch (6),
                        optionMismatch (7),
                        mtuMismatch (8),
                        duplicateRouterId (9),
                        noError (10) }
        MAX-ACCESS   accessible-for-notify
        STATUS   current
        DESCRIPTION
           "Potential types of configuration conflicts.
           Used by the ospfv3ConfigError and
           ospfv3ConfigVirtError notifications. When the last value
           of a notification using this object is needed, but no
           notifications of that type have been sent, this value
           pertaining to this object should be returned as
           noError"
        ::= { ospfv3NotificationEntry 1 }

    ospfv3PacketType OBJECT-TYPE
        SYNTAX       INTEGER {
                        hello (1),
                        dbDescript (2),
                        lsReq (3),
                        lsUpdate (4),
                        lsAck (5),
                        nullPacket (6) }
        MAX-ACCESS   accessible-for-notify
        STATUS       current
        DESCRIPTION
           "OSPFv3 packet types. When the last value of a notification
           using this object is needed, but no notifications of
           that type have been sent, the value pertaining
           to this object should be returned as nullPacket"
        ::= { ospfv3NotificationEntry 2 }

    ospfv3PacketSrc      OBJECT-TYPE
            SYNTAX       InetAddress
            MAX-ACCESS   accessible-for-notify
            STATUS       current
            DESCRIPTION
               "The IPv6 address of an inbound packet that cannot
               be identified by a neighbor instance. When

Internet Draft          Expires February 2007               [Page 54]


                              OSPFv3 MIB                   August 2006


               the last value of a notification using this object is
               needed, but no notifications of that type have been sent,
               the value pertaining to this object should
               be returned as 0

               Only IPv6 addresses without zone index are expected."
        ::= { ospfv3NotificationEntry 3 }


    -- Notification definitions


   ospfv3VirtIfStateChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId,  -- The originator of the notification
                  ospfv3VirtIfState  -- The new state
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3VirtIfStateChange notification signifies that there
           has been a change in the state of an OSPFv3 virtual
           interface.

           This notification should be generated when the interface
           state regresses (e.g., goes from Point-to-Point to Down)
           or progresses to a terminal state (i.e., Point-to-Point)."
        ::= { ospfv3Notifications 1 }

   ospfv3NbrStateChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId,   -- The originator of
                                    -- the notification
                  ospfv3NbrState    -- The new state
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3NbrStateChange notification signifies that
           there has been a change in the state of a
           non-virtual OSPFv3 neighbor. This notification should be
           generated when the neighbor state regresses
           (e.g., goes from Attempt or Full to 1-Way or
           Down) or progresses to a terminal state (e.g.,
           2-Way or Full). When an neighbor transitions
           from or to Full on non-broadcast multi-access
           and broadcast networks, the notification should be
           generated by the designated router. A designated
           router transitioning to Down will be noted by
           ospfIfStateChange."
        ::= { ospfv3Notifications 2 }

   ospfv3VirtNbrStateChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
                  ospfv3VirtNbrState  -- The new state
           }
        STATUS       current

Internet Draft          Expires February 2007               [Page 55]


                              OSPFv3 MIB                   August 2006


        DESCRIPTION
           "An ospfv3VirtNbrStateChange notification signifies
           that there has been a change in the state of an OSPFv3
           virtual neighbor. This notification should be generated
           when the neighbor state regresses (e.g., goes
           from Attempt or Full to 1-Way or Down) or
           progresses to a terminal state (e.g., Full)."
        ::= { ospfv3Notifications 3 }

   ospfv3IfConfigError NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3IfState,         -- State of the interface
           ospfv3PacketSrc,       -- IPv6 address of source
           ospfv3ConfigErrorType, -- Type of error
           ospfv3PacketType       -- Type of packet
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3IfConfigError notification signifies that a
           packet has been received on a non-virtual
           interface from a router whose configuration
           parameters conflict with this router's
           configuration parameters. Note that the event
           optionMismatch should cause a notification only if it
           prevents an adjacency from forming."
        ::= { ospfv3Notifications 4 }

   ospfv3VirtIfConfigError NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3VirtIfState,     -- State of the interface
           ospfv3ConfigErrorType, -- Type of error
           ospfv3PacketType
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3VirtIfConfigError notification signifies that a
           packet has been received on a virtual interface
           from a router whose configuration parameters
           conflict with this router's configuration
           parameters. Note that the event optionMismatch
           should cause a notification only if it prevents an
           adjacency from forming."
        ::= { ospfv3Notifications 5 }


   ospfv3IfRxBadPacket NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3IfState,         -- State of the interface
           ospfv3PacketSrc,       -- The source IPv6 address
           ospfv3PacketType       -- Type of packet
           }
        STATUS       current
        DESCRIPTION

Internet Draft          Expires February 2007               [Page 56]


                              OSPFv3 MIB                   August 2006


           "An ospfv3IfRxBadPacket notification signifies that an
           OSPFv3 packet that cannot be parsed has been received on a
           non-virtual interface."
        ::= { ospfv3Notifications 6 }

   ospfv3VirtIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
          ospfv3VirtIfState,      -- State of the interface
          ospfv3PacketType        -- Type of packet
          }
        STATUS       current
        DESCRIPTION
           "An ospfv3VirtIfRxBadPacket notification signifies
           that an OSPFv3 packet that cannot be parsed has been received
           on a virtual interface."
        ::= { ospfv3Notifications 7 }


   ospfv3LsdbOverflow NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3ExtAreaLsdbLimit -- Limit on External LSAs
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3LsdbOverflow notification signifies that the
           number of LSAs in the router's link-state
           database has exceeded ospfv3ExtAreaLsdbLimit."
        ::= { ospfv3Notifications 8 }

   ospfv3LsdbApproachingOverflow NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3ExtAreaLsdbLimit
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3LsdbApproachingOverflow notification signifies
           that the number of LSAs in the router's
           link-state database has exceeded ninety percent of
           ospfv3ExtAreaLsdbLimit."
        ::= { ospfv3Notifications 9 }

   ospfv3IfStateChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3IfState   -- The new state
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3IfStateChange notification signifies that there
           has been a change in the state of a non-virtual
           OSPFv3 interface. This notification should be generated
           when the interface state regresses (e.g., goes
           from Dr to Down) or progresses to a terminal
           state (i.e., Point-to-Point, DR Other, Dr, or

Internet Draft          Expires February 2007               [Page 57]


                              OSPFv3 MIB                   August 2006


           Backup)."
        ::= { ospfv3Notifications 10 }

   ospfv3NssaTranslatorStatusChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
           ospfv3AreaNssaTranslatorState  -- new state
           }
        STATUS       current
        DESCRIPTION
           "An ospfv3NssaTranslatorStatusChange notification
           indicates that there has been a change in the router's
           ability to translate OSPFv3 NSSA LSAs into OSPFv3 External
           LSAs. This notification should be generated when the
           Translator Status transitions from or to any defined
           status on a per area basis."
        ::= { ospfv3Notifications 11 }

   ospfv3RestartStatusChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
                  ospfv3RestartStatus,  -- new status
                  ospfv3RestartInterval,
                  ospfv3RestartExitRc
                }
        STATUS       current
        DESCRIPTION
           "An ospfv3RestartStatusChange notification signifies that
           there has been a change in the graceful restart
           state for the router. This notification should be
           generated when the router restart status
           changes."
        ::= { ospfv3Notifications 12 }

   ospfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
                  ospfv3NbrRestartHelperStatus,  -- new status
                  ospfv3NbrRestartHelperAge,
                  ospfv3NbrRestartHelperExitRc
                }
        STATUS       current
        DESCRIPTION
           "An ospfv3NbrRestartHelperStatusChange notification
           signifies that there has been a change in the
           graceful restart helper state for the neighbor.
           This notification should be generated when the
           neighbor restart helper status transitions for a neighbor."
        ::= { ospfv3Notifications 13 }

   ospfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
        OBJECTS { ospfv3RouterId, -- The originator of the notification
                  ospfv3VirtNbrRestartHelperStatus,  -- new status
                  ospfv3VirtNbrRestartHelperAge,
                  ospfv3VirtNbrRestartHelperExitRc
                }

Internet Draft          Expires February 2007               [Page 58]


                              OSPFv3 MIB                   August 2006


        STATUS       current
        DESCRIPTION
           "An ospfv3VirtNbrRestartHelperStatusChange
           notification signifies that there has been a
           change in the graceful restart helper state for
           the virtual neighbor. This notification should be
           generated when the virtual neighbor restart helper status
           transitions for a virtual neighbor."
        ::= { ospfv3Notifications 14 }



    -- conformance information

    ospfv3Groups      OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
    ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }

    -- compliance statements

    ospfv3Compliance MODULE-COMPLIANCE
            STATUS          current
            DESCRIPTION     "The compliance statement"
            MODULE          -- this module
            MANDATORY-GROUPS {
                            ospfv3BasicGroup,
                            ospfv3AreaGroup,
                            ospfv3IfGroup,
                            ospfv3VirtIfGroup,
                            ospfv3NbrGroup,
                            ospfv3CfgNbrGroup,
                            ospfv3VirtNbrGroup,
                            ospfv3AreaAggregateGroup,
                            ospfv3NotificationObjectGroup,
                            ospfv3NotificationGroup
                            }

            GROUP           ospfv3AsLsdbGroup
            DESCRIPTION
                "This group is required for OSPFv3 systems that
                display their AS-scope link state database."

            GROUP           ospfv3AreaLsdbGroup
            DESCRIPTION
                "This group is required for OSPFv3 systems that
                display their Area-scope link state database."

            GROUP           ospfv3LinkLsdbGroup
            DESCRIPTION
                "This group is required for OSPFv3 systems that
                display their Link-scope link state database."

            GROUP           ospfv3HostGroup
            DESCRIPTION

Internet Draft          Expires February 2007               [Page 59]


                              OSPFv3 MIB                   August 2006


                "This group is required for OSPFv3 systems that
                support attached hosts."

            OBJECT          ospfv3NbrAddressType
            SYNTAX          InetAddressType { ipv6(2) }
            DESCRIPTION
                "An implementation is only required to support IPv6
                address without zone index."

            OBJECT          ospfv3VirtNbrAddressType
            SYNTAX          InetAddressType { ipv6(2) }
            DESCRIPTION
                "An implementation is only required to support IPv6
                address without zone index."

            ::= { ospfv3Compliances 1 }

    -- units of conformance

    ospfv3BasicGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3RouterId,
                            ospfv3AdminStat,
                            ospfv3VersionNumber,
                            ospfv3AreaBdrRtrStatus,
                            ospfv3ASBdrRtrStatus,
                            ospfv3AsScopeLsaCount,
                            ospfv3AsScopeLsaCksumSum,
                            ospfv3OriginateNewLsas,
                            ospfv3RxNewLsas,
                            ospfv3ExtLsaCount,
                            ospfv3ExtAreaLsdbLimit,
                            ospfv3MulticastExtensions,
                            ospfv3ExitOverflowInterval,
                            ospfv3DemandExtensions,
                            ospfv3ReferenceBandwidth,
                            ospfv3RestartSupport,
                            ospfv3RestartInterval,
                            ospfv3RestartStatus,
                            ospfv3RestartAge,
                            ospfv3RestartExitRc,
                            ospfv3NotificationEnable
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring
                OSPFv3 global parameters."
            ::= { ospfv3Groups 1 }


    ospfv3AreaGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3ImportAsExtern,

Internet Draft          Expires February 2007               [Page 60]


                              OSPFv3 MIB                   August 2006


                            ospfv3AreaSpfRuns,
                            ospfv3AreaBdrRtrCount,
                            ospfv3AreaAsBdrRtrCount,
                            ospfv3AreaScopeLsaCount,
                            ospfv3AreaScopeLsaCksumSum,
                            ospfv3AreaSummary,
                            ospfv3AreaStatus,
                            ospfv3StubMetric,
                            ospfv3AreaNssaTranslatorRole,
                            ospfv3AreaNssaTranslatorState,
                            ospfv3AreaNssaTranslatorStabInt,
                            ospfv3AreaNssaTranslatorEvents,
                            ospfv3AreaStubMetricType
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for OSPFv3 systems
                supporting areas."
            ::= { ospfv3Groups 2 }

    ospfv3AsLsdbGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3AsLsdbSequence,
                            ospfv3AsLsdbAge,
                            ospfv3AsLsdbChecksum,
                            ospfv3AsLsdbAdvertisement,
                            ospfv3AsLsdbTypeKnown
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for OSPFv3 systems
                that display their AS-scope link state database."
            ::= { ospfv3Groups 3 }

    ospfv3AreaLsdbGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3AreaLsdbSequence,
                            ospfv3AreaLsdbAge,
                            ospfv3AreaLsdbChecksum,
                            ospfv3AreaLsdbAdvertisement,
                            ospfv3AreaLsdbTypeKnown
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for OSPFv3 systems
                that display their Area-scope link state database."
            ::= { ospfv3Groups 4 }

    ospfv3LinkLsdbGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3LinkLsdbSequence,
                            ospfv3LinkLsdbAge,
                            ospfv3LinkLsdbChecksum,

Internet Draft          Expires February 2007               [Page 61]


                              OSPFv3 MIB                   August 2006


                            ospfv3LinkLsdbAdvertisement,
                            ospfv3LinkLsdbTypeKnown
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for OSPFv3 systems
                that display their Link-scope link state database."
            ::= { ospfv3Groups 5 }

    ospfv3HostGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3HostMetric,
                            ospfv3HostStatus,
                            ospfv3HostAreaID
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for OSPFv3 systems
                that support attached hosts."
            ::= { ospfv3Groups 6 }

    ospfv3IfGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3IfAreaId,
                            ospfv3IfType,
                            ospfv3IfAdminStat,
                            ospfv3IfRtrPriority,
                            ospfv3IfTransitDelay,
                            ospfv3IfRetransInterval,
                            ospfv3IfHelloInterval,
                            ospfv3IfRtrDeadInterval,
                            ospfv3IfPollInterval,
                            ospfv3IfState,
                            ospfv3IfDesignatedRouter,
                            ospfv3IfBackupDesignatedRouter,
                            ospfv3IfEvents,
                            ospfv3IfStatus,
                            ospfv3IfMulticastForwarding,
                            ospfv3IfDemand,
                            ospfv3IfMetricValue,
                            ospfv3IfLinkScopeLsaCount,
                            ospfv3IfLinkLsaCksumSum,
                            ospfv3IfDemandNbrProbe,
                            ospfv3IfDemandNbrProbeRetxLimit,
                            ospfv3IfDemandNbrProbeInterval
                            }
            STATUS          current
            DESCRIPTION
                "These interface objects used for
                managing/monitoring OSPFv3 interfaces."
            ::= { ospfv3Groups 7 }

    ospfv3VirtIfGroup OBJECT-GROUP

Internet Draft          Expires February 2007               [Page 62]


                              OSPFv3 MIB                   August 2006


            OBJECTS         {
                            ospfv3VirtIfIndex,
                            ospfv3VirtIfInstId,
                            ospfv3VirtIfTransitDelay,
                            ospfv3VirtIfRetransInterval,
                            ospfv3VirtIfHelloInterval,
                            ospfv3VirtIfRtrDeadInterval,
                            ospfv3VirtIfState,
                            ospfv3VirtIfEvents,
                            ospfv3VirtIfStatus,
                            ospfv3VirtIfLinkScopeLsaCount,
                            ospfv3VirtIfLinkLsaCksumSum
                            }
            STATUS          current
            DESCRIPTION
                "These virtual interface objects are used for
                managing/monitoring OSPFv3 virtual interfaces."
            ::= { ospfv3Groups 8 }

    ospfv3NbrGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3NbrAddressType,
                            ospfv3NbrAddress,
                            ospfv3NbrOptions,
                            ospfv3NbrPriority,
                            ospfv3NbrState,
                            ospfv3NbrEvents,
                            ospfv3NbrLsRetransQLen,
                            ospfv3NbrHelloSuppressed,
                            ospfv3NbrIfId,
                            ospfv3NbrRestartHelperStatus,
                            ospfv3NbrRestartHelperAge,
                            ospfv3NbrRestartHelperExitRc
                            }
            STATUS          current
            DESCRIPTION
                "These neighbor objects are used for
                managing/monitoring OSPFv3 neighbors."
            ::= { ospfv3Groups 9 }

    ospfv3CfgNbrGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3CfgNbrPriority,
                            ospfv3CfgNbrStatus
                            }
            STATUS          current
            DESCRIPTION
                "These configured neighbor objects are used for
                managing/monitoring OSPFv3 configured neighbors."
            ::= { ospfv3Groups 10 }

    ospfv3VirtNbrGroup OBJECT-GROUP
            OBJECTS         {

Internet Draft          Expires February 2007               [Page 63]


                              OSPFv3 MIB                   August 2006


                            ospfv3VirtNbrIfIndex,
                            ospfv3VirtNbrIfInstId,
                            ospfv3VirtNbrAddressType,
                            ospfv3VirtNbrAddress,
                            ospfv3VirtNbrOptions,
                            ospfv3VirtNbrState,
                            ospfv3VirtNbrEvents,
                            ospfv3VirtNbrLsRetransQLen,
                            ospfv3VirtNbrHelloSuppressed,
                            ospfv3VirtNbrIfId,
                            ospfv3VirtNbrRestartHelperStatus,
                            ospfv3VirtNbrRestartHelperAge,
                            ospfv3VirtNbrRestartHelperExitRc
                            }
            STATUS          current
            DESCRIPTION
                "These virtual neighbor objects are used for
                managing/monitoring OSPFv3 virtual neighbors."
            ::= { ospfv3Groups 11 }

    ospfv3AreaAggregateGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3AreaAggregateStatus,
                            ospfv3AreaAggregateEffect,
                            ospfv3AreaAggregateRouteTag
                            }
            STATUS          current
            DESCRIPTION
                "These area aggregate objects used required for
                aggregating OSPFv3 prefixes for summarization
                across areas."
            ::= { ospfv3Groups 12 }

    ospfv3NotificationObjectGroup OBJECT-GROUP
            OBJECTS         {
                            ospfv3ConfigErrorType,
                            ospfv3PacketType,
                            ospfv3PacketSrc
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used to record notification
                parameters"
            ::= { ospfv3Groups 13 }

    ospfv3NotificationGroup NOTIFICATION-GROUP
            NOTIFICATIONS   {
                            ospfv3VirtIfStateChange,
                            ospfv3NbrStateChange,
                            ospfv3VirtNbrStateChange,
                            ospfv3IfConfigError,
                            ospfv3VirtIfConfigError,
                            ospfv3IfRxBadPacket,

Internet Draft          Expires February 2007               [Page 64]


                              OSPFv3 MIB                   August 2006


                            ospfv3VirtIfRxBadPacket,
                            ospfv3LsdbOverflow,
                            ospfv3LsdbApproachingOverflow,
                            ospfv3IfStateChange,
                            ospfv3NssaTranslatorStatusChange,
                            ospfv3RestartStatusChange,
                            ospfv3NbrRestartHelperStatusChange,
                            ospfv3VirtNbrRestartHelperStatusChange
                            }
            STATUS          current
            DESCRIPTION
                "This group is used for OSPFv3 notifications"
            ::= { ospfv3Groups 14 }

    END


5. Security Considerations

   There are a number of management objects defined in this MIB that
   have a MAX-ACCESS clause of read-write and/or read-create. Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.

   It is recommended that attention be specifically given to
   implementing the MAX-ACCESS clause in objects in scenarios
   that DO NOT use SNMPv3 strong security (i.e. authentication and
   encryption). Extreme caution must be used to minimize the risk of
   cascading security vulnerabilities when SNMPv3 strong security is
   not used. When SNMPv3 strong security is not used, these objects
   should have access of read-only, not read-create.

   SNMPv1 by itself is not a secure environment. Even if the network
   itself is secure (for example by using IPsec), even then, there is
   no control as to who on the secure network is allowed to access and
   GET/SET (read/change/create/delete) the objects in this MIB.

   It is recommended that the implementers consider the security
   features as provided by the SNMPv3 framework. Specifically, the use
   of the User-based Security Model RFC 3414 [RFC3414] and the
   View-based Access Control Model RFC 3415 [RFC3415] is recommended.

   It is then a customer/user responsibility to ensure that the SNMP
   entity giving access to an instance of this MIB, is properly
   configured to give access to the objects only to those principals
   (users) that have legitimate rights to indeed GET or SET
   (change/create/delete) them.


6. IANA Considerations


Internet Draft          Expires February 2007               [Page 65]


                              OSPFv3 MIB                   August 2006


   The MIB module in this document uses the following IANA-assigned
   OBJECT IDENTIFIER values recorded in the SMI Numbers registry:

        Descriptor        OBJECT IDENTIFIER value
        ----------        -----------------------

        ospfv3MIB           { mib-2 XXX }

   [Editor's Note (to be removed prior to publication):  the IANA is
   requested to assign a value for "XXX" under the 'mib-2' subtree and
   to record the assignment in the SMI Numbers registry.  When the
   assignment has been made, the RFC Editor is asked to replace "XXX"
   (here and in the MIB module) with the assigned value and to remove
   this note.]


7. Acknowledgements

   This document is based on the MIB for OSPF version 2 by Rob
   Coltun and Fred Baker [RFC1850]. The editors would like to thank
   Toshiaki Takada, Ramachandran Radhakrishnan, Harikrishna Golapalli
   Mahesh Kurapati, Acee Lindem, Keith McCloghrie, Manish Gupta,
   Nic Neate, Vanitha N., Vivek Dubey and Ramana Koppula for their
   constructive comments.


8. Normative References

   [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Structure of Management
             Information Version 2 (SMIv2)", STD 58, RFC 2578, April
             1999.

   [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Textual Conventions for
             SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
             Rose, M. and S. Waldbusser, "Conformance Statements for
             SMIv2", STD 58, RFC 2580, April 1999.

   [RFC1850] Baker, F., and Coltun, R., "OSPF Version 2 Management
             Information Base", RFC 1850, November 1995.

   [RFC2740] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC
             2740, December 1999.

   [RFC2465] Haskin, D., Onishi, S., "Management Information Base for
             IP Version 6: Textual Conventions and General Group", RFC
             2465, December 1998.

   [RFC2328] Moy, J., "OSPF Version 2",   RFC 2328, April 1998.


Internet Draft          Expires February 2007               [Page 66]


                              OSPFv3 MIB                   August 2006



9. Informative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2460] Deering, S., and R. Hinden, "Internet Protocol, Version 6
             (IPv6) Specification", RFC 2460, December 1998.

   [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
             "Introduction and Applicability Statements for
             Internet-Standard Management Framework", RFC 3410,
             December 2002.

   [RFC3414] Blumenthal, U., Wijnen, B., "User-based Security Model
             (USM) for version 3 of the Simple Network Management
             Protocol (SNMPv3)", RFC 3414, December 2002.

   [RFC3415] Wijnen, B., Presuhn, R., McCloghrie, K.,
             "View-based Access Control Model (VACM) for the
             Simple Network Management Protocol (SNMP)", RFC 3415,
             December 2002.


10. Contributors' Addresses

   Jacek Kwiatkowski
   Intel Technology Poland
   ul. Slowackiego 173
   80-298 Gdansk, Poland
   Email: jacek.kwiatkowski@intel.com

   Sebastian Zwolinski
   Intel Technology Poland
   ul. Slowackiego 173
   80-298 Gdansk, Poland
   Email: sebastian.zwolinski@intel.com


11. Editors' Addresses

   Dan Joyal
   Nortel
   600 Technology Park Drive
   Billerica, MA 01821
   Email: djoyal@nortel.com

   Vishwas Manral
   IP Infusion
   Bangalore
   India


Internet Draft          Expires February 2007               [Page 67]


                              OSPFv3 MIB                   August 2006


   Email: vishwas@ipinfusion.com


12. Differences from RFC 1850

     (1)  Textual Conventions are imported from INET-ADDRESS-MIB,
          IF-MIB and OSPF-MIB MIBs.

     (2)  The "ospf" prefix for entity names is changed to
          "ospfv3".

     (3)  General Group object name ospfVersionNumber is changed to
          ospfv3VersionNumber and its value is changed from 2 to 3.

     (4)  General Group object name ospfExternLsaCount is changed
          to ospfv3AsScopeLsaCount to indicate countof all
          AS-scoped LSAs in the database.

     (5)  General Group object name ospfExternLsaCksumSum is
          changed to ospfv3AsScopeCksumSum to indicate checksum of
          all AS-scoped LSAs in the database.

     (6)  Removed General Group object ospfTOSSupport.

     (7)  Removed ospfAuthType object from Area entry.

     (8)  Changed object names ospfAreaLsaCount and
          ospfAreaLsaCksumSum to ospfv3AreaScopeLsaCount and
          ospfv3AreaScopeLsaCksumSum.

     (9)  Removed OSPF Area Default Metric Table.

     (10) Added object ospfv3StubMetric to Area entry as substitute
          for Area Default Metric Table.

     (11) Changed name of External LSDB Table to AS-Scope LSDB
          Table.  Replaced object name prefix "ospfExtLsdb" with
          "ospfv3AsLsdb".

     (12) Changed name of LSDB Table to Area-Scope LSDB Table.
          Replaced object name prefix "ospfLsdb" with
          "ospfv3AreaLsdb".

     (13) Added ospfv3LinkLsdbTable which contains all LSAs of
          Link-Scope. Index of ospfv3LinkLsdbTable is interface
          index, LSA Type, Router ID and LSID.

     (14) Re-ordered Router ID and LSID index components of LSDB
          table entries. Since LSIDs no longer have addressing
          semantics, GET-NEXT operations on partial OIDs are more
          useful when the Router ID component comes before the LSID
          component.


Internet Draft          Expires February 2007               [Page 68]


                              OSPFv3 MIB                   August 2006


     (15) Address Range Table is removed.

     (16) Removed ospfHostTOS from Host Table entry. Object
          ospfHostIpAddress changed to ospfv3HostAddress with
          SYNTAX changed from IpAddress to InetAddress.

     (17) Added object ospfv3HostAddressType to Host Table entry to
          determine the address type of ospfv3HostAddress.

     (18) The MAX-ACCESS value of object ospfv3HostAreaID is
          changed to read-create.

     (19) Objects ospfIfIpAddress and ospfAddressLessIf removed
          from Interface entry and as Interface Table entry index
          components.

     (20) Object ospfv3IfIndex added to Interface Table entry with
          SYNTAX InterfaceIndex. It replaces ospfIfIpAddress and
          ospfAddressLessIf as the Interface Table entry index.

     (21) The SYNTAX of objects ospfIfDesignatedRouter and
          ospfIfBackupDesignatedRouter is changed from IpAddress
          to RouterID.

     (22) Objects ospfIfAuthType and ospfIfAuthKey are removed from
          Interface and Virtual Interface entries.

     (23) Added objects ospfv3IfLinkScopeLsaCount and
          ospfv3IfLinkLsaCksumSum to Interface entry. They maintain
          the count of Link-Scope LSAs and the checksum of the
          Link-Scope LSA database associated with the interface.

     (24) Removed OSPF Interface Metric Table. Metric is now
          accessed via object ospfv3IfMetricValue in the Interface
          entry.

     (25) Added object ospfv3IfInstId to Interface entry to enable
          the setting of the interface instance value of the
          interface. The default value is zero.

     (26) Added object ospfv3VirtIfIndex to Virtual Interface entry
          which is used to assign a local interface ID to the
          virtual interface.

     (27) Added objects ospfv3VirtIfLinkScopeLsaCount and
          ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry.
          They maintain the count of Link-Scope LSAs and the
          checksum of the Link-Scope LSA database associated with
          the virtual interface.

     (28) The Neighbor Table (ospfv3NbrTable) is a read-only table
          and it contains only the neighbors that were learned from
          LSAs.

Internet Draft          Expires February 2007               [Page 69]


                              OSPFv3 MIB                   August 2006



     (29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex
          from Neighbor entry.

     (30) Added object ospfv3NbrIfIndex to Neighbor entry. Index
          components ospfNbrIpAddr and ospfNbrAddressLessIndex are
          replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId.

     (31) Added object ospfv3NbrAddressType to Neighbor entry to
          determine the address type of ospfv3NbrAddress.

     (32) Added object ospfv3NbrAddress to Neighbor entry. This
          object contains the neighbor's IPv6 address.

     (33) Removed objects ospfCfgNbrStatus and
          ospfCfgNbrPermanence from Neighbor entry.

     (34) Added object ospfv3NbrIfId to Neighbor entry. This object
          contains the neighbor's local interface index from the
          neighbor's hellos advertised on the link.

     (35) The MAX-ACCESS value of object ospfNbrPriority is
          changed to read-only. Removed DEFVAL for object
          ospfv3NbrPriority.

     (36) Added ospfv3CfgNbrTable (Configured Neighbor Table)
          containing all manually configured neighbors. The index of
          ospfv3CfgNbrTable is ospfv3CfgNbrIfIndex,
          ospfv3CfgAddressType, and ospfv3CfgNbrAddress.

     (37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor
          entry.  This is the interface index of the virtual link
          over which the virtual neighbor is reached.

     (38) Changed object name ospfVirtNbrIpAddr to
          ospfv3VirtNbrAddress and SYNTAX from IpAddress to
          InetAddress.

     (39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor
          entry to determine the address type of
          ospfv3VirtNbrAddress.

     (40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry.
          This is the virtual neighbor's local virtual interface
          index from the neighbor's hellos advertised on the
          virtual link.

     (41) Changed object name ospfAreaAggregateMask to
          ospfv3AreaAggregatePrefixLenth and SYNTAX from IpAddress
          to InetAddressPrefixLength.

     (42) Changed object name ospfAreaAggregateNet to
          ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to

Internet Draft          Expires February 2007               [Page 70]


                              OSPFv3 MIB                   August 2006


          InetAddress.

     (43) Added object ospfv3AreaAggregatePrefixType to Area
          Aggregate entry to determine the address type of
          ospfv3AreaAggregatePrefix.

     (44) Index for Area Aggregate Table entry changed from
          ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
          ospfAreaAggregateNet, ospfAreaAggregateMask to
          ospfv3AreaAggregateAreaID,
          ospfv3AreaAggregateAreaLsdbType,
          ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix,
          ospfv3AreaAggregatePrefixLength.

     (45) Conformance information is changed to reflect object
          groups removed or added.

     (46) OSPFv3 traps are not defined.

     (47) Added UNITS clause for the following objects:
          ospfv3ExitOverflowInterval,
          ospfv3AreaNssaTranslatorStabilityInterval,
          ospfv3AsLsdbAge, ospfv3AreaLsdbAge, ospfv3LinkLsdbAge,
          ospfv3IfTransitDelay, ospfv3IfRetransInterval,
          ospfv3IfHelloInterval, ospfv3IfRtrDeadInterval,
          ospfv3IfPollInterval, ospfv3VirtIfTransitDelay,
          ospfv3VirtIfRetransInterval, ospfv3VirtIfHelloInterval,
          ospfv3VirtIfRtrDeadInterval.

     (48) Changed SYNTAX from PositiveInteger to Unsigned32 for
          the following objects: ospfv3ExitOverflowInterval,
          ospfv3IfRtrDeadInterval, ospfv3IfPollInterval,
          ospfv3VirtIfRtrDeadInterval.

     (49) Changed MAX-ACCESS of row indices from read-only to
          not-accessible.

     (50) Added a new object ospfv3ExtLsaCount for support of RFC1765.

     (51) Compiled cleanly the MIB using "smilint -m -s -l 9 -i
           namelength-32".

     (52) Removed LSA type enumerations from the LSDB tables, but
           ranges added as required by compiler.

     (53) Added object to LSDB tables to check if the LSA is locally
           originated.

     (54) Add External Route Tag to AreaAggregate Table for NSSA.

     (55) Added Object for OSPFv3 Reference bandwidth.

     (56) Graceful restart objects to general group.

Internet Draft          Expires February 2007               [Page 71]


                              OSPFv3 MIB                   August 2006



     (57) Graceful restart Objects to NBR MIBS.

     (58) ospfv3AreaSummary default value has been changed to import
           summary LSA's in line with RFC3101.

     (59) Added support for inactive neighbor probing support over DC.

     (60) Removed ospfv3HostAddressType and ospfv3CfgNbrAddressType
           from the compliance module to get compiler over warnings.
           The information is already there in the description.

     (61) Changed description of ospfv3IfMetricValue to also refer
           to the new Reference Bandwidth general group object.

     (62) Added Table of contents.

     (63) Added a section for contributor's address and added authors
           of previous versions to that section.

     (64) Changed working group mail address.

     (65) Added a new TEXTUAL-CONVENTION Ospfv3UpToRefreshIntervalTc.

     (66) Changed RestartAge, RestartInterval, TransitDelay,
           RetransmitInterval in all MIBs to be of the syntax
           Ospfv3UpToRefreshIntervalTc.

     (67) Defined a new texual convention for Router Dead Range.

     (68) Changed syntax for all router dead intervals accordingly.

     (69) Added OSPFv3AreaStubMetricType object.

     (70) Changed names ospfv3SpfRuns =>> ospfv3AreaSpfRuns and
           ospfv3StubMetric =>> ospfv3AreaStubMetric.

     (71) Clarified description of ospfv3AreaAggregateRouteTag.

     (72) Added a new Textual convention for Ospfv3RouterIdTc and
           replaced all uses of RouterID with this new TC, based on
           Keith's feedback.

     (73) Removed all references to Site-Local Addresses, as they will
           soon be deprecated.

     (74) Used AS-External-LSA's instead of Type-5 and NSSA-LSA's
           instead of Type-7.

     (75) For ospfv3NbrRtrId and ospfv3CfgNbrRtrId removed description
           referring to IP Address.



Internet Draft          Expires February 2007               [Page 72]


                              OSPFv3 MIB                   August 2006


     (76) Removed ospfv3TrafficEngineeringSupport to be consistent
           with OSPFv2.

     (77) Create new TC Ospfv3AreaIdTc with syntax Unsigned32 to
           replace AreaID TC. Remove IMPORT of AreaID.

     (78) LSID syntax changed from ipAddress to Unsigned32.

     (79) Added Notifications


13. Full Copyright Statement

  Copyright (C) The Internet Society (2006).

  This document is subject to the rights, licenses and restrictions
  contained in BCP 78, and except as set forth therein, the authors
  retain all their rights.

  This document and the information contained herein are provided on an
  "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
  OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
  ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
  INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
  INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
  WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


14. Intellectual Property

  The IETF takes no position regarding the validity or scope of any
  Intellectual Property Rights or other rights that might be claimed to
  pertain to the implementation or use of the technology described in
  this document or the extent to which any license under such rights
  might or might not be available; nor does it represent that it has
  made any independent effort to identify any such rights.  Information
  on the procedures with respect to rights in RFC documents can be
  found in BCP 78 and BCP 79.

  Copies of IPR disclosures made to the IETF Secretariat and any
  assurances of licenses to be made available, or the result of an
  attempt made to obtain a general license or permission for the use of
  such proprietary rights by implementers or users of this
  specification can be obtained from the IETF on-line IPR repository at
  http://www.ietf.org/ipr.

  The IETF invites any interested party to bring to its attention any
  copyrights, patents or patent applications, or other proprietary
  rights that may cover technology that may be required to implement
  this standard. Please address the information to the IETF at
  ietf-ipr@ietf.org.



Internet Draft          Expires February 2007               [Page 73]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/