[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-dhody-pce-iro-update) 00 01 02 03 04 05 06 07 RFC 7896

PCE Working Group                                               D. Dhody
Internet-Draft                                       Huawei Technologies
Updates: 5440 (if approved)                                 May 20, 2015
Intended status: Standards Track
Expires: November 21, 2015


 Update to Include Route Object (IRO) specification in Path Computation
                 Element communication Protocol (PCEP)
                      draft-ietf-pce-iro-update-02

Abstract

   During discussions of a document to provide a standard representation
   and encoding of Domain-Sequence within the Path Computation Element
   (PCE) communication Protocol (PCEP) for communications between a Path
   Computation Client (PCC) and a PCE, or between two PCEs, it was
   determined that there was a need for clarification with respect to
   the ordered nature of the Include Route Object (IRO).

   An informal survey was conducted to determine the state of current
   and planned implementation with respect to IRO ordering and handling
   of Loose bit (L bit).

   This document updates the IRO specification based on the survey
   conclusion and recommendation.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 21, 2015.








Dhody                   Expires November 21, 2015               [Page 1]


Internet-Draft                 IRO-UPDATE                       May 2015


Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Requirements Language . . . . . . . . . . . . . . . . . .   3
   2.  Update in IRO specification . . . . . . . . . . . . . . . . .   3
   3.  Other Considerations  . . . . . . . . . . . . . . . . . . . .   4
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   4
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   4
   6.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .   4
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   4
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .   4
     7.2.  Informative References  . . . . . . . . . . . . . . . . .   5
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   5

1.  Introduction

   The Path Computation Element Communication Protocol (PCEP) provides
   mechanisms for Path Computation Elements (PCEs) to perform path
   computations in response to Path Computation Clients (PCCs) requests.

   [RFC5440] defines the Include Route Object (IRO) to specify network
   elements to be traversed in the computed path.  The specification did
   not mention if IRO is an ordered or un-ordered list of sub-objects.
   It mentioned that the Loose bit (L bit) has no meaning within an IRO.

   [RFC5441] suggested the use of IRO to indicate the sequence of
   domains to be traversed during inter-domain path computation.

   In order to discover the current state of affairs amongst
   implementations a survey of the existing and planned implementations
   was conducted.  This survey [I-D.dhody-pce-iro-survey] was informal
   and conducted via email.  Responses were collected and anonymized by
   the PCE working group chair.



Dhody                   Expires November 21, 2015               [Page 2]


Internet-Draft                 IRO-UPDATE                       May 2015


   During discussion of [I-D.ietf-pce-pcep-domain-sequence] it was
   proposed to have a new IRO type with ordered nature, as well as
   handling of Loose bit (L bit); however, with the update to [RFC5440]
   described in this document, no new IRO type is needed.

   This document updates the IRO specifications in section 7.12 of
   [RFC5440] as per the conclusion and action points presented in
   [I-D.dhody-pce-iro-survey].

1.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  Update in IRO specification

   Section 7.12 of [RFC5440] describes IRO as an optional object used to
   specify a set of network elements to be traversed in the computed
   path.  It also states that the Loose bit (L bit) in sub-object has no
   meaning within an IRO.  It did not mention if IRO is an ordered or
   un-ordered list of sub-objects.

   A survey of the existing and planned implementations was conducted in
   order to discover the current state of affairs amongst
   implementations.  [I-D.dhody-pce-iro-survey] describe the
   questionnaire, results and presents some conclusions and proposed
   action items.

   The survey suggest that most implementations construct or interpret
   IRO in an ordered fashion and consider it to be an ordered list.
   More than half of implementation under survey consider the IRO sub-
   objects as strict hops, others consider loose or support both.  The
   results shown in this survey seems to suggest that most
   implementations would be fine with updating [RFC5440] to specify IRO
   as an ordered list as well as to enable support for Loose bit (L bit)
   such that both strict and loose hops could be supported in the IRO.

   This document thus updates [RFC5440] regarding the IRO specification
   and is intended to replace the last line in section 7.12 of
   [RFC5440], that states -

       "The L bit of such sub-object has no meaning within an IRO."

   As per the update in this document, the L Bit of IRO sub-object is
   set based on the loose or strict property of the sub-object, which is
   set if the sub-object represents a loose hop.  If the bit is not set,




Dhody                   Expires November 21, 2015               [Page 3]


Internet-Draft                 IRO-UPDATE                       May 2015


   the sub-object represents a strict hop.  The interpretation of Loose
   bit (L bit) is as per section 4.3.3.1 of [RFC3209].

   Also, as per the update in this document, the content of IRO is an
   ordered list of sub-objects representing a series of abstract nodes.
   An abstract node could just be a simple abstract node comprising one
   node or a group of nodes for example an AS (comprising of multiple
   hops within the AS) (refer section 4.3.2 of [RFC3209]).

3.  Other Considerations

   Based on the survey, it should be noted that most implementation
   already support the update in the IRO specification as per this
   document.  The other implementation are expected to make an update to
   the IRO procedures.

4.  Security Considerations

   This update in IRO specification does not introduce any new security
   considerations, apart from those mentioned in [RFC5440].
   Clarification in the supported IRO ordering or Loose bit handling
   will not have any negative security impact.

   It is worth noting that PCEP operates over TCP.  An analysis of the
   security issues for routing protocols that use TCP (including PCEP)
   is provided in [RFC6952], while [I-D.ietf-pce-pceps] discusses an
   experimental approach to provide secure transport for PCEP.

5.  IANA Considerations

   This document makes no requests to IANA for action.

6.  Acknowledgments

   A special thanks to PCE chairs for guidance regarding this work.

   Thanks to Francesco Fondelli for his suggestions in clarifying the L
   bit usage.

   Thanks to Adrian Farrel for his review and comments.

7.  References

7.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.




Dhody                   Expires November 21, 2015               [Page 4]


Internet-Draft                 IRO-UPDATE                       May 2015


   [RFC3209]  Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan, V.,
              and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP
              Tunnels", RFC 3209, December 2001.

   [RFC5440]  Vasseur, JP. and JL. Le Roux, "Path Computation Element
              (PCE) Communication Protocol (PCEP)", RFC 5440, March
              2009.

7.2.  Informative References

   [RFC5441]  Vasseur, JP., Zhang, R., Bitar, N., and JL. Le Roux, "A
              Backward-Recursive PCE-Based Computation (BRPC) Procedure
              to Compute Shortest Constrained Inter-Domain Traffic
              Engineering Label Switched Paths", RFC 5441, April 2009.

   [RFC6952]  Jethanandani, M., Patel, K., and L. Zheng, "Analysis of
              BGP, LDP, PCEP, and MSDP Issues According to the Keying
              and Authentication for Routing Protocols (KARP) Design
              Guide", RFC 6952, May 2013.

   [I-D.ietf-pce-pcep-domain-sequence]
              Dhody, D., Palle, U., and R. Casellas, "Standard
              Representation of Domain-Sequence", draft-ietf-pce-pcep-
              domain-sequence-08 (work in progress), April 2015.

   [I-D.ietf-pce-pceps]
              Lopez, D., Dios, O., Wu, W., and D. Dhody, "Secure
              Transport for PCEP", draft-ietf-pce-pceps-04 (work in
              progress), May 2015.

   [I-D.dhody-pce-iro-survey]
              Dhody, D., "Informal Survey into Include Route Object
              (IRO) Implementations in Path Computation Element
              communication Protocol (PCEP)", draft-dhody-pce-iro-
              survey-02 (work in progress), December 2014.

Author's Address

   Dhruv Dhody
   Huawei Technologies
   Divyashree Techno Park, Whitefield
   Bangalore, Karnataka  560037
   India

   EMail: dhruv.ietf@gmail.com






Dhody                   Expires November 21, 2015               [Page 5]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/