[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]
Versions: 00 01 02 03 04 05 06 07 08 09 RFC 3730
Internet Engineering Task Force S. Hollenbeck
Internet-Draft VeriSign, Inc.
May 30, 2001 Expires: November 30, 2001
Extensible Provisioning Protocol
<draft-ietf-provreg-epp-02.txt>
Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This document describes an application layer client-server protocol
for the provisioning and management of objects stored in a shared
central repository. Specified in XML, the protocol defines generic
object management operations and an extensible framework that maps
protocol operations to objects.
Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
In examples, "C:" represents lines sent by a protocol client and "S:"
represents lines returned by a protocol server. Indentation and white
space in examples is provided only to illustrate element relationships
and is not a REQUIRED feature of this protocol.
XML protocol elements are case sensitive. Data carried in XML is case
insensitive unless stated otherwise.
Hollenbeck Expires November 30, 2001 [Page 1]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Table of Contents
1. Introduction ................................................. 3
2. Protocol Description ......................................... 4
2.1 Protocol Identification ..................................... 5
2.2 Hello Format ................................................ 5
2.3 Greeting Format ............................................. 5
2.4 Command Format .............................................. 7
2.5 Response Format ............................................. 9
2.6 Protocol Extension Framework ................................ 14
2.7 Server-Defined Extensions ................................... 14
2.8 Object Identification ....................................... 15
2.9 Protocol Commands ........................................... 16
2.9.1 Session Management Commands ............................... 16
2.9.1.1 EPP <login> Command ..................................... 16
2.9.1.2 EPP <logout> Command .................................... 19
2.9.2 Object Query Commands ..................................... 20
2.9.2.1 EPP <check> Command ..................................... 20
2.9.2.2 EPP <info> Command ...................................... 22
2.9.2.3 EPP <poll> Command ...................................... 24
2.9.2.4 EPP <transfer> Query Command ............................ 27
2.9.3 Object Transform Commands ................................. 29
2.9.3.1 EPP <create> Command .................................... 29
2.9.3.2 EPP <delete> Command .................................... 31
2.9.3.3 EPP <renew> Command ..................................... 32
2.9.3.4 EPP <transfer> Command .................................. 34
2.9.3.5 EPP <update> Command .................................... 37
3. Result Codes ................................................. 39
4. Formal Syntax ................................................ 45
4.1 Base Schema ................................................. 45
4.2 Shared Structure Schema ..................................... 53
5. Internationalization Considerations .......................... 55
6. IANA Considerations .......................................... 56
7. Security Considerations ...................................... 57
8. References ................................................... 58
9. Author's Address ............................................. 59
A. Revisions From Previous Version .............................. 60
B. Full Copyright Statement ..................................... 61
C: Object Mapping Outline ....................................... 62
Hollenbeck Expires November 30, 2001 [Page 2]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
1. Introduction
This document describes specifications for the Extensible Provisioning
Protocol (EPP) version 1.0, an XML text protocol that permits multiple
service providers to perform object provisioning operations using a
shared central object repository. EPP is specified using the
Extensible Markup Language (XML) 1.0 as described in [XML] and XML
Schema notation as described in [XMLS-1] and [XMLS-2]. EPP meets and
exceeds the requirements for a generic registry registrar protocol as
described in [GRRP].
EPP is intended for use in diverse operating environments where
transport and security requirements vary greatly. It is unlikely that
a single transport or security specification will meet the needs of
all anticipated operators, so EPP was designed for use in a layered
protocol environment. This document only describes the EPP
application layer protocol.
XML is case sensitive. XML specifications and examples provided in
this document MUST be interpreted in the exact character case
presented to develop a conforming implementation.
This document is being discussed on the "ietf-provreg" mailing list.
To join the list, send a message to <majordomo@cafax.se> with the
words "subscribe ietf-provreg" in the body of the message. There is a
web site for the list archives at http://www.cafax.se/ietf-provreg.
Hollenbeck Expires November 30, 2001 [Page 3]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
2. Protocol Description
EPP is an XML protocol that can be layered over multiple transport
protocols. Protected using lower-layer security protocols, clients
exchange identification, authentication, and option information, and
then engage in a series of client-initiated command-response
exchanges. All EPP commands are atomic and idempotent.
EPP provides four basic service elements: service discovery, commands,
responses, and an extension framework that supports definition of
managed objects and the relationship of protocol requests and
responses to those objects.
A connection-oriented EPP server MUST respond to connection creation
by returning a greeting to a client. A connection-less EPP server
MUST be prompted to provide a greeting to a client. In both cases, a
client SHOULD wait for the greeting before sending an EPP command to
the server. The server MUST respond to each EPP command with a
coordinated response that describes the results of processing the
command.
EPP commands fall into three categories: session management commands,
query commands, and data transform commands. Session management
commands are used to establish and end persistent sessions with an EPP
server. Query commands are used to perform read-only object
information retrieval operations. Transform commands are used to
perform read-write object management operations.
EPP uses XML namespaces to provide an extensible object management
framework and to identify schemas required for XML instance parsing
and validation. These namespaces and schema definitions are used to
identify both the base protocol schema and the schemas for managed
objects.
All XML instances SHOULD begin with an <?xml?> declaration to identify
the version of XML that is being used, optionally identify use of the
UTF-8 character set defined in [RFC2279], and optionally to provide a
hint to an XML parser that an external schema file is needed to
validate the XML instance. EPP use with character sets other than
UTF-8 is not described in this document. Conformant XML parsers are
required to understand UTF-8, thus the "encoding" attribute is
OPTIONAL.
Hollenbeck Expires November 30, 2001 [Page 4]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example XML declarations:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<?xml version="1.0" standalone="no"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0"?>
2.1 Protocol Identification
All EPP XML instances MUST begin with an <epp> element. This element
identifies the start of an EPP protocol element, the namespace used
within the protocol, and the location of the protocol schema. This
start element and the associated ending element MUST be applied to all
structures sent by both clients and servers.
Example "start" and "end" EPP elements:
<epp xmlns="urn:iana:xml:ns:epp"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
</epp>
2.2 Hello Format
EPP MAY be carried over both connection-oriented and connection-less
transport protocols. An EPP client MAY request a <greeting> from an
EPP server at any time by sending a <hello> to a server. Use of this
element is essential in a connection-less environment where a server
can not return a <greeting> in response to a client-initiated
connection. An EPP <hello> SHALL be an empty element with no child
elements.
Example <hello>:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <hello/>
C:</epp>
2.3 Greeting Format
An EPP server responds to a successful connection and <hello> element
Hollenbeck Expires November 30, 2001 [Page 5]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
by returning a <greeting> element to the client. An EPP greeting
SHALL contain the following elements:
- An <svID> element that contains the name of the server.
- An <svDate> element that contains the server's current date and time
in UTC.
- An <svcMenu> element that identifies the services supported by the
server, including:
- One or more <version> elements that identify the protocol versions
supported by the server.
- One or more <lang> elements that contain the identifiers of the text
response languages known by the server. Language identifiers MUST be
structured as documented in [RFC3066]. Only language identifiers
listed in [ISO639] MAY be used.
- One or more object-specific <obj:svc> elements that identify the
objects that the server is capable of managing.
- An OPTIONAL <unspec> (unspecified) element that contains one or more
object-specific <obj:svc> elements that identify custom object
extensions supported by the server.
A server MAY limit object management privileges on a per-client basis.
Hollenbeck Expires November 30, 2001 [Page 6]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example greeting:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <greeting>
S: <svID>Example Company EPP server epp.example.com</svID>
S: <svDate>2000-06-08T22:00:00.0Z</svDate>
S: <svcMenu>
S: <version>1.0</version>
S: <lang>en</lang>
S: <lang>fr</lang>
S: <obj1:svc xmlns:obj1="urn:iana:xml:ns:obj1"
S: xsi:schemaLocation="urn:iana:xml:ns:obj1 obj1.xsd"/>
S: <obj2:svc xmlns:obj2="urn:iana:xml:ns:obj2"
S: xsi:schemaLocation="urn:iana:xml:ns:obj2 obj2.xsd"/>
S: <obj3:svc xmlns:obj3="urn:iana:xml:ns:obj3"
S: xsi:schemaLocation="urn:iana:xml:ns:obj3 obj3.xsd"/>
S: <unspec>
S: <obj1ext:svc xmlns:obj1ext="http://custom/obj1ext"
S: xsi:schemaLocation="http://custom/obj1ext obj1ext.xsd"/>
S: </unspec>
S: </svcMenu>
S: </greeting>
S:</epp>
2.4 Command Format
An EPP client interacts with an EPP server by sending commands to the
server and receiving responses from the server. Commands and
responses need not be exchanged serially. In addition to the standard
EPP elements, an EPP command SHALL contain the following elements:
- A <creds> (client identity credentials) element that provides client
identity information. Use of this element MAY be OPTIONAL or REQUIRED
depending on how the client wishes to manage sessions with the server.
A <creds> element SHALL contain the following elements:
- A <clID> element that contains the client identifier assigned to
the client by the server.
- A <pw> element that contains the client's plain text password.
The value of this element is case sensitive.
- An OPTIONAL <newPW> element that contains a new plain text
password to be assigned to the client for use with subsequent
Hollenbeck Expires November 30, 2001 [Page 7]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<creds> elements. The value of this element is case sensitive.
- An <options> element that contains the following child elements:
- A <version> element that contains the protocol version to be
used for the command or ongoing server session.
- A <lang> element that contains the text response language to
be used for the command or ongoing server session commands.
The values of the <version> and <lang> elements MUST exactly
match one of the values presented in the EPP greeting.
- A command element whose tag corresponds to one of the valid EPP
commands described in this document. The command element MAY contain
either protocol-specified or object-specified child elements.
- An OPTIONAL <unspec> (unspecified) element that MAY be used for
server-defined command extensions.
- An OPTIONAL <clTRID> (client transaction identifier) element that
uniquely identifies the command to the client.
EPP supports both session-less and session-oriented operating modes,
though the two operating modes MAY NOT be mixed. An ongoing server
session that preserves client identity and authorization information
MAY be created and ended using the <login> and <logout> commands.
Commands MAY also be executed outside of an established session
through use of the <creds> element within the command.
Session-less operation implies that object service availability and
client identity MUST be checked on a per-command basis. Significant
improvements in server processing performance MAY be realized using
the protocol's session-oriented operating mode.
Hollenbeck Expires November 30, 2001 [Page 8]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example command without credentials:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <info>
C: <obj:info xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <obj:name>example</obj:name>
C: </obj:info>
C: </info>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
Example command with credentials:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <creds>
C: <clID>ClientX</clID>
C: <pw>foo-BAR2</pw>
C: <newPW>bar-FOO2</newPW>
C: <options>
C: <version>1.0</version>
C: <lang>en</lang>
C: </options>
C: </creds>
C: <info>
C: <obj:info xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <obj:name>example</obj:name>
C: </obj:info>
C: </info>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
2.5 Response Format
Hollenbeck Expires November 30, 2001 [Page 9]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
An EPP server responds to a client command by returning a response to
the client. EPP commands are atomic, so a command must either succeed
completely or fail completely. Success and failure results MUST NOT
be mixed. In addition to the standard EPP elements, an EPP response
SHALL contain the following elements:
- One or more <result> elements that document the success or failure
of command execution. If the command was processed successfully, only
one <result> element SHALL be returned. If the command was not
processed successfully, multiple <result> elements MAY be returned to
document failure conditions. Each <result> element SHALL contain the
following attribute and child elements:
- An OPTIONAL <msgQ> element containing a "count" attribute that
identifies the number of service messages queued for client retrieval.
If there are no queued messages, this element MAY be missing or empty,
and the value of the "count" attribute SHALL be zero. The default
value for the "count" attribute MUST be zero if unspecified.
- A "code" attribute whose value is a four-digit, decimal number
that describes the success or failure of the command.
- A <msg> element containing a human-readable description of the
response code. The language of the response is identified via an
OPTIONAL "lang" attribute. If not specified, the default attribute
value SHALL be "en" (English). An OPTIONAL "id" attribute MAY be
present when responding to an EPP <poll> command. See the
description of the <poll> command for more information describing
the server message queue.
- Zero or more OPTIONAL <value> elements that echo client-provided
values that caused server error conditions.
- An OPTIONAL <resData> (response data) element that contains child
elements specific to the command and associated object.
- An OPTIONAL <unspec> (unspecified) element that MAY be used for
server-defined response extensions.
- A <roid> element that contains the Repository Object IDentifier
associated with an object transform command. This element is REQUIRED
when responding to a <create> or <info> command, and MUST be absent
otherwise.
- A <trID> (transaction identifier) element containing the transaction
identifier assigned by the server to the command for which the
response is being returned. The transaction identifier is formed
using the <clTRID> associated with the command if supplied by the
Hollenbeck Expires November 30, 2001 [Page 10]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
client and a <svTRID> (server transaction identifier) that is assigned
by and unique to the server.
Transaction identifiers provide command-response synchronization
integrity. They SHOULD be logged, retained, and protected to ensure
that both the client and the server have consistent temporal and state
management records.
Example response without <value> or <resData>:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg lang="en">Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Hollenbeck Expires November 30, 2001 [Page 11]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example response with <resData>:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <obj:name>example</obj:name>
S: </obj:creData>
S: </resData>
S: <unspec/>
S: <roid>EXAMPLE-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Hollenbeck Expires November 30, 2001 [Page 12]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example response with error <value>:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="2005">
S: <msg>Parameter value range error</msg>
S: <value>2525</value>
S: </result>
S: <result code="2006">
S: <msg>Parameter value syntax error</msg>
S: <value>ex(ample</value>
S: <value>abc.ex(ample</value>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Example response with notice of waiting server messages:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <msgQ count="4"/>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Command success or failure MUST NOT be assumed if no response is
returned or if a returned response is malformed. Protocol idempotency
ensures the safety of retrying a command in cases of response delivery
Hollenbeck Expires November 30, 2001 [Page 13]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
failure.
2.6 Protocol Extension Framework
EPP provides an extensible object management framework that defines
the syntax and semantics of protocol operations applied to a managed
object. This framework pushes the definition of each protocol
operation into the context of a specific object, providing the ability
to add mappings for new objects without having to modify the base
protocol.
Protocol elements that contain data specific to objects are identified
using XML namespace notation with a reference to an XML schema that
defines the namespace. The schema for EPP supports use of dynamic
object schemas on a per-command and per-response basis. For example,
the start of an object-specific command element would be described in
generic terms as follows:
C:<EPPCommandName>
C: <object:command xmlns:object="urn:iana:xml:ns:object"
C: xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
C: <!-- One or more object-specific command elements. -->
C: </object:command>
C:</EPPCommandName>
An object-specific response element would be described similarly:
S:<resData>
S: <object:resData xmlns:object="urn:iana:xml:ns:object"
S: xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
S: <!-- One or more object-specific response elements. -->
S: </object:resData>
S:</resData>
This document does not define mappings for specific objects. The
mapping of EPP to an object MUST be described in separate documents
that specifically address each command and response in the context of
the object. A suggested object mapping outline is included as an
appendix to this document.
2.7 Server-Defined Extensions
EPP provides a facility for unspecified protocol command and response
extensions. Protocol commands and responses MAY be extended by an
<unspec> element that contains additional elements whose syntax and
semantics are not explicitly defined by EPP or an EPP object mapping.
This element is OPTIONAL and MAY be empty. These extensions are
typically defined by agreement between client and server and MAY be
Hollenbeck Expires November 30, 2001 [Page 14]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
used to extend EPP for unique operational needs. A server-extended
command element would be described in generic terms as follows:
C:<EPPCommandName>
C: <object:command xmlns:object="urn:iana:xml:ns:object"
C: xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
C: <!-- One or more object-specific command elements. -->
C: </object:command>
C: <unspec>
C: <!-- One or more server-defined elements. -->
C: </unspec>
C:</EPPCommandName>
An server-extended response element would be described similarly:
S:<response>
S: <result code="1000">
S: <msg lang="en">Command completed successfully</msg>
S: </result>
S: <unspec>
S: <!-- One or more server-defined elements. -->
S: </unspec>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S:</response>
This document does not define any specific server extensions. The
mapping of server extensions to EPP MUST be described in separate
documents that specifically address extended commands and responses in
the server's operational context.
2.8 Object Identification
Some objects, such as name servers and contacts, MAY have utility in
multiple repositories. However, maintaining disjoint copies of object
information in multiple repositories can lead to inconsistencies that
have adverse consequences for the Internet. For example, changing a
name server name in one repository, but not in a second repository
that refers to the server for domain name delegation, can produce
unexpected DNS query results.
Globally unique identifiers can help facilitate object information
sharing between repositories. A globally unique identifier MUST be
assigned to every object when the object is created, and the
identifier MUST be returned within the response for the command that
created the object. Specific identifier values are a matter of
Hollenbeck Expires November 30, 2001 [Page 15]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
repository policy, but they SHOULD be constructed according to the
following algorithm:
a) Divide the provisioning repository world into a number of object
repository classes.
b) Each repository within a class is assigned an identifier that is
maintained by IANA.
(c) Each repository is responsible for assigning a unique local
identifier for each object within the repository.
(d) The globally unique identifier is a concatenation of the local
identifier, followed by a hyphen ("-"), followed by the repository
identifier.
2.9 Protocol Commands
EPP provides commands to manage sessions, retrieve object information,
and perform transformation operations on objects. All EPP commands
are atomic and idempotent, either succeeding completely or failing
completely and producing predictable results in case of repeated
execution. This section describes each EPP command, including
examples with representative server responses.
2.9.1 Session Management Commands
EPP provides two commands for session management: <login> to establish
a session with a server, and <logout> to end a session with a server.
The <login> command establishes an ongoing server session that
preserves client identity and authorization information during the
duration of the session. Alternatively, identity credentials MAY be
provided with an EPP command to facilitate session-less operation.
Session-oriented and session-less operating modes MUST NOT be mixed.
Commands other than the <login> command MUST NOT include identity
credentials when submitted after successfully processing a <login>
command.
2.9.1.1 EPP <login> Command
The EPP <login> command is used to establish a session with an EPP
server in response to a greeting issued by the server. A <login>
command MUST be sent to a server before any other EPP command.
A client identifier and initial password MUST be created on the server
before a client can successfully complete a <login> command. The
client identifier and initial password MUST be delivered to the client
Hollenbeck Expires November 30, 2001 [Page 16]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
using an out-of-band method that protects the identifier and password
from inadvertent disclosure.
A <creds> element MUST be provided with the <login> command. Once a
session has been established with the <login> command, subsequent
commands MUST NOT include a <creds> element.
In addition to the standard EPP command elements, the <login> command
SHALL contain the following child elements:
- A <svcs> element that contains one or more object <svc> elements
that identify the objects and unspecified extensions to be managed
during the session. The <svcs> element MAY contain an OPTIONAL
<unspec> (unspecified) element that contains one or more object-
specific <obj:svc> elements that identify custom object extensions
supported by the server.
The PLAIN SASL mechanism presented in [RFC2595] describes a format for
providing a user identifier, an authorization identifier, and a
password as part of a single plain text string. The EPP
authentication mechanism is similar, though EPP does not require a
session-level authorization identifier and the user identifier and
password are separated into distinct XML elements. Additional
identification and authorization schemes MUST be provided at other
protocol layers to provide more robust security services.
Hollenbeck Expires November 30, 2001 [Page 17]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <login> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <creds>
C: <clID>ClientX</clID>
C: <pw>foo-BAR2</pw>
C: <newPW>bar-FOO2</newPW>
C: <options>
C: <version>1.0</version>
C: <lang>en</lang>
C: </options>
C: </creds>
C: <login>
C: <svcs>
C: <obj1:svc xmlns:obj1="urn:iana:xml:ns:obj1"
C: xsi:schemaLocation="urn:iana:xml:ns:obj1 obj1.xsd"/>
C: <obj2:svc xmlns:obj2="urn:iana:xml:ns:obj2"
C: xsi:schemaLocation="urn:iana:xml:ns:obj2 obj2.xsd"/>
C: <obj3:svc xmlns:obj3="urn:iana:xml:ns:obj3"
C: xsi:schemaLocation="urn:iana:xml:ns:obj3 obj3.xsd"/>
C: <unspec>
C: <obj1ext:svc xmlns:obj1ext="http://custom/obj1ext"
C: xsi:schemaLocation="http://custom/obj1ext obj1ext.xsd"/>
C: </unspec>
C: </svcs>
C: </login>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <login> command has been processed successfully, a server MUST
respond with an EPP response with no <resData> element. If
successful, the server will respond by creating and maintaining a new
session that SHOULD be terminated by a future <logout> command.
Hollenbeck Expires November 30, 2001 [Page 18]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <login> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <login> command is used to establish a session with an EPP
server. A <login> command MUST be rejected if received within the
bounds of an existing session. This action MUST be open to all
authorized clients.
2.9.1.2 EPP <logout> Command
The EPP <logout> command is used to end a session with an EPP server.
In addition to the standard EPP command elements, the <logout> command
SHALL contain an empty <logout> command element. A server MAY also
end a session asynchronously due to client inactivity or excessive
client session longevity. The parameters for determining excessive
client inactivity or session longevity are a matter of server policy
and are not specified by this protocol.
Example <logout> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <logout/>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <logout> command has been processed successfully, a server MUST
Hollenbeck Expires November 30, 2001 [Page 19]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
respond with an EPP response with no <resData> element. If
successful, the server MUST also end the current session.
Example <logout> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1500">
S: <msg>Command completed successfully; ending session</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <logout> command is used to end a session with an EPP server.
A <logout> command MUST be rejected if the command has not been
preceded by a successful <login> command. This action MUST be open to
all authorized clients.
2.9.2 Object Query Commands
EPP provides four commands to retrieve object information: <check> to
determine if an object is known to the server, <info> to retrieve
detailed information associated with a known object, <poll> to receive
service notifications from the server, and <transfer> to retrieve
object transfer status information.
2.9.2.1 EPP <check> Command
The EPP <check> command is used to determine if an object exists in
the server repository. The elements needed to identify an object are
object-specific, so the child elements of the <check> command are
specified using the EPP extension framework. In addition to the
standard EPP command elements, the <check> command SHALL contain the
following child elements:
- An object-specific <obj:check> element that identify the objects to
be queried. Multiple objects of the same type MAY be queried within a
single <check> command.
Hollenbeck Expires November 30, 2001 [Page 20]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <check> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <check>
C: <obj:check xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <obj:name>example1</obj:name>
C: <obj:name>example2</obj:name>
C: <obj:name>example3</obj:name>
C: </obj:check>
C: </check>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <check> command has been processed successfully, a server MUST
respond with an EPP <resData> element that MUST contain a child
element that identifies the object namespace and the location of the
object schema. The child elements of the <resData> element are
object-specific, though the EPP <resData> element MUST contain a child
<obj:chkData> element that SHALL contain the following child elements
and attributes:
- One or more <obj:cd> (check data) elements that echo the object
identifiers provided in the command and contain an "x" attribute whose
value identifies the object as either "+" for a known object or "-"
for an unknown object.
Hollenbeck Expires November 30, 2001 [Page 21]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <check> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:chkData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <obj:cd x="+">example1</obj:cd>
S: <obj:cd x="-">example2</obj:cd>
S: <obj:cd x="+">example3</obj:cd>
S: </obj:chkData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <check> command is used to determine if an object exists in
the server repository. This action MUST be open to all authorized
clients.
2.9.2.2 EPP <info> Command
The EPP <info> command is used to retrieve information associated with
an existing object. The elements needed to identify an object and the
type of information associated with an object are both object-
specific, so the child elements of the <info> command are specified
using the EPP extension framework. In addition to the standard EPP
command elements, the <info> command SHALL contain the following child
elements:
- An object-specific <obj:info> element that identifies the object to
be queried.
Hollenbeck Expires November 30, 2001 [Page 22]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <info> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <info>
C: <obj:info xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:info>
C: </info>
C: </command>
C:</epp>
When an <info> command has been processed successfully, a server MUST
respond with an EPP <resData> element that MUST contain a child
element that identifies the object namespace and the location of the
object schema and the Repository Object Identifier (ROID) that was
assigned to the object when the object was created. The child
elements of the <resData> element are object-specific.
Example <info> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:infData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <!-- Object-specific elements. -->
S: </obj:infData>
S: </resData>
S: <unspec/>
S: <roid>EXAMPLE1-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Hollenbeck Expires November 30, 2001 [Page 23]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
The EPP <info> command is used to retrieve information associated with
an existing object. This action SHOULD be limited to authorized
clients; restricting this action to the sponsoring client is
RECOMMENDED.
2.9.2.3 EPP <poll> Command
The EPP <poll> command is used to discover and retrieve client service
messages from a server. Information that MAY be made available to a
client using service messages includes notification of object transfer
requests and anticipated server outages; other messages types MAY be
defined as a matter of server policy.
Service messages are queued by the server for client retrieval. A
<poll> command MUST return the first message from the message queue.
Each message returned from the server includes a server-unique message
identifier that MUST be provided to acknowledge receipt of the
message, and a counter that indicates the number of messages in the
queue. As a message is received by the client, the client MUST
respond to the message with an explicit acknowledgement to confirm
that the message has been received. A server MUST dequeue a message
and decrement the queue counter after receiving acknowledgement from
the client, making the next message in the queue (if any) available
for retrieval.
Some of the information returned in response to a <poll> command MAY
be object-specific, so some child elements of the <poll> response MAY
be specified using the EPP extension framework. In addition to the
standard EPP command elements, the <poll> command SHALL contain no
child elements and an "op" attribute with value "req" to retrieve the
first message from the server message queue, or both an "op" attribute
with value "ack" and a "msgID" attribute whose value corresponds to
the value of "id" attribute copied from the <msg> element in the
response that is being acknowledged.
Example <poll> request command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <poll op="req"/>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
Hollenbeck Expires November 30, 2001 [Page 24]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
The returned result code identifies responses with message information
returned in response to a <poll> command.
Example <poll> response with object-specific information:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1301">
S: <msg id="12345">Transfer request pending.</msg>
S: </result>
S: <msgQ count="5"/>
S: <resData>
S: <obj:transfer xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <obj:name>example</obj:name>
S: </obj:transfer>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
A client MUST acknowledge each response to dequeue the message and
make subsequent messages available for retrieval.
Example <poll> acknowledgement command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <poll op="ack" msgID="12345"/>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
A <poll> acknowledgement response notes the ID of the message that has
been acknowledged and the number of messages remaining in the queue.
Hollenbeck Expires November 30, 2001 [Page 25]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <poll> acknowledgement response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg id="12345">Command completed successfully</msg>
S: </result>
S: <msgQ count="4"/>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Service messages MAY also be returned without object information.
Example <poll> response without object-specific information:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1301">
S: <msg id="12346">Credit balance low.</msg>
S: </result>
S: <msgQ count="4"/>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The returned result code and message is used to note an empty server
message queue.
Hollenbeck Expires November 30, 2001 [Page 26]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <poll> response to note an empty message queue:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1300">
S: <msg>Command completed successfully; no messages</msg>
S: </result>
S: <msgQ/>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <poll> command is used to discover and retrieve client service
messages from a server. This action SHOULD be limited to authorized
clients; queuing service messages and limiting queue access on a per-
client basis is RECOMMENDED.
2.9.2.4 EPP <transfer> Query Command
The EPP <transfer> command provides a query operation that allows a
client to determine real-time status of pending and completed transfer
requests. The elements needed to identify an object that is the
subject of a transfer request are object-specific, so the child
elements of the <transfer> query command are specified using the EPP
extension framework. In addition to the standard EPP command
elements, the <transfer> command SHALL contain an "op" attribute with
value "query", and the following child elements:
- An object-specific <obj:transfer> element that identifies the object
whose transfer status is requested.
Hollenbeck Expires November 30, 2001 [Page 27]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <transfer> query command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <transfer op="query">
C: <obj:transfer xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:transfer>
C: </transfer>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <transfer> query command has been processed successfully, a
server MUST respond with an EPP <resData> element that MUST contain a
child element that identifies the object namespace and the location of
the object schema. The child elements of the <resData> element are
object-specific.
Example <transfer> query response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:trnData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <!-- Object-specific elements. -->
S: </obj:trnData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
Hollenbeck Expires November 30, 2001 [Page 28]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
The EPP <transfer> command provides a query operation that allows a
client to determine real-time status of pending and completed transfer
requests. This action SHOULD be limited to authorized clients;
restricting queries to the requesting and responding clients is
RECOMMENDED. Object transfer MAY be unavailable or limited by
object-specific policies.
2.9.3 Object Transform Commands
EPP provides five commands to transform objects: <create> to create an
instance of an object with a server, <delete> to remove an instance of
an object from a server, <renew> to extend the validity period of an
object, <update> to change information associated with an object, and
<transfer> to manage changes in client sponsorship of an object.
2.9.3.1 EPP <create> Command
The EPP <create> command is used to create an instance of an object.
An object may be created for an indefinite period of time, or an
object may be created for a specific validity period. The EPP mapping
for an object MUST describe the status of an object with respect to
time, to include expected client and server behavior if a validity
period is used.
The elements needed to identify an object and associated attributes
are object-specific, so the child elements of the <create> command are
specified using the EPP extension framework. In addition to the
standard EPP command elements, the <create> command SHALL contain the
following child elements:
- An object-specific <obj:create> element that identifies the object
to be created and the elements that are required to create the object.
Hollenbeck Expires November 30, 2001 [Page 29]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <create> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <create>
C: <obj:create xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:create>
C: </create>
C: <unspec/>
C: <clTRID>ABC-12345</clTRID>
C: </command>
C:</epp>
When a <create> command has been processed successfully, a server MUST
respond with an EPP <resData> element that MUST contain a child
element that identifies the object namespace and the location of the
object schema and the Repository Object Identifier (ROID) that has
been assigned to the object. The child elements of the <resData>
element are object-specific.
A ROID is an identifier that uniquely identifies an object across
repositories. ROIDs are formed by combining a server-assigned unique
identifier with a registered value that identifies the repository.
Hollenbeck Expires November 30, 2001 [Page 30]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <create> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <!-- Object-specific elements. -->
S: </obj:creData>
S: </resData>
S: <unspec/>
S: <roid>EXAMPLE1-VRSN</roid>
S: <trID>
S: <clTRID>ABC-12345</clTRID>
S: <svTRID>54321-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <create> command is used to create an instance of an object.
This action SHOULD be limited to authorized clients and MAY be
restricted on a per-client basis.
2.9.3.2 EPP <delete> Command
The EPP <delete> command is used to remove an instance of an existing
object. The elements needed to identify an object are object-
specific, so the child elements of the <delete> command are specified
using the EPP extension framework. In addition to the standard EPP
command elements, the <delete> command SHALL contain the following
child elements:
- An object-specific <obj:delete> element that identifies the object
to be deleted.
Hollenbeck Expires November 30, 2001 [Page 31]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <delete> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <delete>
C: <obj:delete xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:delete>
C: </delete>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <delete> command has been processed successfully, a server MUST
respond with an EPP response with no <resData> element.
Example <delete> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <delete> command is used to remove an instance of an existing
object. This action SHOULD be limited to authorized clients;
restricting this action to the sponsoring client is RECOMMENDED.
2.9.3.3 EPP <renew> Command
The EPP <renew> command is used to extend the validity period of an
existing object. The elements needed to identify and extend the
Hollenbeck Expires November 30, 2001 [Page 32]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
validity period of an object are object-specific, so the child
elements of the <renew> command are specified using the EPP extension
framework. In addition to the standard EPP command elements, the
<renew> command SHALL contain the following child elements:
- An object-specific <obj:renew> element that identifies the object to
be renewed and the elements that are required to extend the validity
period of the object.
Example <renew> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <renew>
C: <obj:renew xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:renew>
C: </renew>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <renew> command has been processed successfully, a server MUST
respond with an EPP <resData> element that MUST contain a child
element that identifies the object namespace and the location of the
object schema. The child elements of the <resData> element are
object-specific.
Hollenbeck Expires November 30, 2001 [Page 33]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <renew> response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <resData>
S: <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
S: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
S: <!-- Object-specific elements. -->
S: </obj:creData>
S: </resData>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <renew> command is used to extend the validity period of an
existing object. This action SHOULD be limited to authorized clients;
restricting this action to the sponsoring client is RECOMMENDED.
Object renewal MAY be unavailable or limited by object-specific
policies.
2.9.3.4 EPP <transfer> Command
The EPP <transfer> command is used to manage changes in client
sponsorship of an existing object. Clients may initiate a transfer
request, cancel a transfer request, approve a transfer request, and
reject a transfer request using the "op" command attribute.
A client who wishes to assume sponsorship of a known object from
another client uses the <transfer> command with the value of the "op"
attribute set to "request". Once a transfer has been requested, the
same client may cancel the request using a <transfer> command with the
value of the "op" attribute set to "cancel". A request to cancel the
transfer MUST be sent to the server before the current sponsoring
client either approves or rejects the transfer request and before the
server automatically processes the request due to responding client
inactivity.
Hollenbeck Expires November 30, 2001 [Page 34]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Once a transfer request has been received by the server, the server
MUST notify the current sponsoring client of the requested transfer by
queuing a service message for retrieval via the <poll> command. The
current status of a pending <transfer> command for any object MAY be
found using the <transfer> query command; the service message MUST
include appropriate object information to perform a <transfer> query.
The current sponsoring client MAY explicitly approve or reject the
transfer request. The client may approve the request using a
<transfer> command with the value of the "op" attribute set to
"approve". The client may reject the request using a <transfer>
command with the value of the "op" attribute set to "reject".
A server MAY automatically approve or reject all transfer requests
that are not explicitly approved or rejected by the current sponsoring
client within a fixed amount of time. The amount of time to wait for
explicit action and the default server behavior are local matters not
specified by EPP, but they SHOULD be documented in a server-specific
profile document that describes default server behavior for client
information.
Objects MAY have associated authorization information that MUST be
provided to complete a <transfer> command. The type of authorization
information required is object-specific; passwords or more complex
mechanisms based on public key cryptography are typical.
The elements needed to identify and complete the transfer of an object
are object-specific, so the child elements of the <transfer> command
are specified using the EPP extension framework. In addition to the
standard EPP command elements, the <transfer> command SHALL contain
the following child elements:
- An object-specific <obj:transfer> element that identifies the object
to be transferred and the elements that are required to process the
transfer command.
Hollenbeck Expires November 30, 2001 [Page 35]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <transfer> request command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <transfer op="request">
C: <obj:transfer xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:transfer>
C: </transfer>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When a <transfer> command has been processed successfully, a server
MUST respond with an EPP response with no <resData> element.
Example <transfer> request response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <transfer> command is used to manage changes in client
sponsorship of an existing object. This action SHOULD be limited to
authorized clients; restricting <transfer> requests to a client other
than the current sponsoring client, <transfer> approval requests to
the current sponsoring client, and <transfer> cancellation requests to
the original requesting client is RECOMMENDED. Object transfer MAY be
unavailable or limited by object-specific policies.
Hollenbeck Expires November 30, 2001 [Page 36]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
2.9.3.5 EPP <update> Command
The EPP <update> command is used to change information associated with
an existing object. The elements needed to identify and modify an
object are object-specific, so the child elements of the <update>
command are specified using the EPP extension framework. In addition
to the standard EPP command elements, the <update> command SHALL
contain the following child elements:
- An object-specific <obj:update> element that identifies the object
to be renewed and the elements that are required to modify the object.
Object-specific elements MUST identify values to be added, values to
be removed, or values to be changed.
Example <update> command:
C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
C:<epp xmlns="urn:iana:xml:ns:epp"
C: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
C: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
C: <command>
C: <update>
C: <obj:update xmlns:obj="urn:iana:xml:ns:obj"
C: xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
C: <!-- Object-specific elements. -->
C: </obj:update>
C: </update>
C: <unspec/>
C: <clTRID>ABC-12346</clTRID>
C: </command>
C:</epp>
When an <update> command has been processed successfully, a server
MUST respond with an EPP response with no <resData> element.
Hollenbeck Expires November 30, 2001 [Page 37]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Example <update> request response:
S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
S:<epp xmlns="urn:iana:xml:ns:epp"
S: xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
S: xsi:schemaLocation="urn:iana:xml:ns:epp epp.xsd">
S: <response>
S: <result code="1000">
S: <msg>Command completed successfully</msg>
S: </result>
S: <unspec/>
S: <trID>
S: <clTRID>ABC-12346</clTRID>
S: <svTRID>54322-XYZ</svTRID>
S: </trID>
S: </response>
S:</epp>
The EPP <update> command is used to change information associated with
an existing object. This action SHOULD be limited to authorized
clients; restricting this action to the sponsoring client is
RECOMMENDED.
Hollenbeck Expires November 30, 2001 [Page 38]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
3. Result Codes
EPP result codes are based on the Theory of Reply Codes described in
Appendix E of [RFC821]. EPP uses four decimal digits to describe the
success or failure of each EPP command. Each of the digits of the
reply have special significance.
The first digit denotes command success or failure. The second digit
denotes the response category, such as command syntax or security.
The third and fourth digits provide explicit response detail within
each response category.
There are two values for the first digit of the reply code:
1yzz Positive completion reply. The command has been accepted and
processed by the system without error.
2yzz Negative completion reply. The command was not accepted and
the requested action did not occur.
The second digit groups responses into one of six specific categories:
x0zz Protocol Syntax
x1zz Implementation-specific Rules
x2zz Security
x3zz Data Management
x4zz Server System
x5zz Connection Management
The third and fourth digits provide response detail within the
categories defined by the first and second digits. Specific result
codes are listed in the table below.
Every EPP response MUST include a result code and a human-readable
description of the result code. The language used to represent the
description MAY be identified using an instance of the "lang"
attribute within the <msg> element. If not specified, the default
language is English, identified as "en". A description of the
structure of valid values for the "lang" attribute is described in
[RFC3066]. A list of valid values for the "lang" attribute is
available in [ISO639].
Response text MAY be translated into other languages, though the
translation MUST preserve the meaning of the code as described here.
Response code values MUST NOT be changed when translating text.
Response text in the table below is enclosed in quotes to clearly mark
the beginning and ending of each response string. Quotes MUST NOT be
Hollenbeck Expires November 30, 2001 [Page 39]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
used to delimit these strings when returning response text via the
protocol.
Successful command completion responses:
Code Response text in US English
___________________________________
1000 "Command completed successfully"
This is the nominal response code for a successfully completed
command. This response code MUST be returned in responses for all
commands other than for the situations relating to the <logout>,
<poll>, and <update> commands as described here.
1300 "Command completed successfully; no messages"
This response code MUST be returned when responding to a <poll>
request command and the server message queue is empty.
1301 <None specified>
This response code MUST be returned when returning a <poll> service
message to a client. Message text for this response code is a
matter of server policy and is not specified by this protocol.
1302 "Command completed successfully; nothing done"
This response code MUST be returned when responding to an empty
<update> command. The <update> object-specific elements of an
<update> command MAY all be OPTIONAL, and XML Schema does not
provide a means to require at least one element from among a
sequence of OPTIONAL elements. This response notes that a valid
well-formed command was received, but no action was specified.
1500 "Command completed successfully; ending session"
This response code MUST be returned when responding to a successful
<logout> command.
Command error responses:
Code Response text in US English
___________________________________
2000 "Unknown command"
This response code MUST be returned when a server receives a command
element that is not defined by EPP.
2001 "Command syntax error"
This response code MUST be returned when a server receives a command
that is improperly formed.
Hollenbeck Expires November 30, 2001 [Page 40]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
2002 "Command use error"
This response code MUST be returned when a server receives a command
that is properly formed, but can not be executed due to a sequencing
or context error. For example, a <logout> command can not be executed
without having first completed a <login> command.
2003 "Required parameter missing"
This response code MUST be returned when a server receives a command
for which a required parameter value has not been provided.
2004 "Parameter value range error"
This response code MUST be returned when a server receives a command
parameter whose value is outside the range of values specified
by the protocol. The error value SHOULD be returned via a <value>
element in the EPP response.
2005 "Parameter value syntax error"
This response code MUST be returned when a server receives a command
containing a parameter whose value is improperly formed. The error
value SHOULD be returned via a <value> element in the EPP response.
2100 "Unimplemented protocol version"
This response code MUST be returned when a server receives a command
element specifying a protocol version that is not implemented by the
server.
2101 "Unimplemented command"
This response code MUST be returned when a server receives a command
element that is a valid EPP command that is not implemented by the
server. For example, a <transfer> command MAY be unimplemented for
certain object types.
2102 "Unimplemented option"
This response code MUST be returned when a server receives a command
element that is a valid EPP command that contains a protocol option
that is not implemented by the server. For example, a server MAY
not implement the protocol's session-less operating mode.
2103 "Unimplemented extension"
This response code MUST be returned when a server receives a command
element that is a valid EPP command that contains a protocol command
extension that is not implemented by the server.
2104 "Billing failure"
This response code MUST be returned when a server attempts to execute
a billable operation and the command can not be completed due to a
client billing failure.
Hollenbeck Expires November 30, 2001 [Page 41]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
2105 "Object is not eligible for renewal"
This response code MUST be returned when a client attempts to <renew>
an object that is not eligible for renewal in accordance with server
policy.
2106 "Object is not eligible for transfer"
This response code MUST be returned when a client attempts to
<transfer> an object that is not eligible for transfer in accordance
with server policy.
2200 "Authentication error"
This response code MUST be returned when a server notes an error when
validating client credentials.
2201 "Authorization error"
This response code MUST be returned when a server notes a client
authorization error when executing a command. This error is used to
note that a client lacks privileges to execute the requested command.
2202 "Invalid authorization identifier"
This response code MUST be returned when a server receives an invalid
command authorization identifier required to confirm authorization to
execute a command. This error is used to note that a client has the
privileges required to execute the requested command, but the
authorization identifier provided by the client does not match the
authorization identifier archived by the server.
2300 "Object pending transfer"
This response code MUST be returned when a server receives a command
to transfer an object that is pending transfer due to an earlier
transfer request.
2301 "Object not pending transfer"
This response code MUST be returned when a server receives a command
to confirm, reject, or cancel the transfer an object when no command
has been made to transfer the object.
2302 "Object exists"
This response code MUST be returned when a server receives a command
to create an object that already exists in the repository.
2303 "Object does not exist"
This response code MUST be returned when a server receives a command
to transform an object that does not exist in the repository.
2304 "Object status prohibits operation"
This response code MUST be returned when a server receives a command
to transform an object that can not be completed due to server policy
Hollenbeck Expires November 30, 2001 [Page 42]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
or business practices. For example, a server MAY disallow <transfer>
commands under terms and conditions that are matters of local policy.
2305 "Object association prohibits operation"
This response code MUST be returned when a server receives a command
to transform an object that can not be completed due to dependencies
on other objects that are associated with the target object. For
example, a server MAY disallow <delete> commands while an object has
active associations with other objects.
2306 "Parameter value policy error"
This response code MUST be returned when a server receives a command
containing a parameter value that is syntactically valid, but
semantically invalid due to local policy. For example, the server
MAY support a subset of a range of valid protocol parameter values.
The error value SHOULD be returned via a <value> element in the EPP
response.
2307 "Unimplemented object service"
This response code MUST be returned when a server receives a command
to operate on an object service that is not supported by the server.
2308 "Data management policy violation"
This response code MUST be returned when a server receives a command
whose execution results in a violation of server data management
policies. For example, removing all attribute values or object
associations from an object MAY be a violation of a server's data
management policies.
2400 "Command failed"
This response code MUST be returned when a server is unable to
execute a command due to an internal server error that is not related
to the protocol. The failure MAY be transient. The server MUST keep
any ongoing session active.
2500 "Command failed; server ending session"
This response code MUST be returned when a server receives a command
that can not be completed due to an internal server error that is not
related to the protocol. The failure is not transient, and will
cause other commands to fail as well. The server MUST end any
ongoing active session.
2501 "Timeout; server ending session"
This response code MUST be returned when a server receives a command
that can not be completed due to a session-oriented timeout.
2502 "Session limit exceeded; server closing connection"
This response code MUST be returned when a server receives a <login>
Hollenbeck Expires November 30, 2001 [Page 43]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
command, and the command can not be completed because the client has
exceeded a system-defined limit on the number of sessions that the
client can establish. It may be possible to establish a session by
ending existing unused sessions.
Hollenbeck Expires November 30, 2001 [Page 44]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
4. Formal Syntax
EPP is specified in XML Schema notation. The formal syntax presented
here is a complete schema representation of EPP suitable for automated
validation of EPP XML instances.
Two schemas are presented here. The first schema is the base EPP
schema. The second schema defines elements and structures that MAY be
used by both the base EPP schema and object mapping schemas.
4.1 Base Schema
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="urn:iana:xml:ns:epp"
xmlns:epp="urn:iana:xml:ns:epp"
xmlns:eppcom="urn:iana:xml:ns:eppcom"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<!--
Import common element types.
-->
<import namespace="urn:iana:xml:ns:eppcom"
schemaLocation="eppcom.xsd"/>
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0 schema.
</documentation>
</annotation>
<!--
Every EPP XML instance must begin with this element.
-->
<element name="epp" type="epp:eppType"/>
<!--
An EPP XML instance must contain a greeting, hello, command,
or response.
-->
<complexType name="eppType">
<choice>
<element name="greeting" type="epp:greetingType"/>
<element name="hello" type="epp:helloType"/>
<element name="command" type="epp:commandType"/>
<element name="response" type="epp:responseType"/>
</choice>
Hollenbeck Expires November 30, 2001 [Page 45]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
</complexType>
<!--
A greeting is sent by a server in response to a client connection
or <hello>.
-->
<complexType name="greetingType">
<sequence>
<element name="svID" type="epp:sIDType"/>
<element name="svDate" type="dateTime"/>
<element name="svcMenu" type="epp:svcMenuType"/>
</sequence>
</complexType>
<!--
A <hello> is sent to request a <greeting>.
-->
<complexType name="helloType"/>
<!--
Server IDs are strings with minimum and maximum length restrictions.
-->
<simpleType name="sIDType">
<restriction base="normalizedString">
<minLength value="3"/>
<maxLength value="64"/>
</restriction>
</simpleType>
<!--
A server greeting identifies available object services.
-->
<complexType name="svcMenuType">
<sequence>
<element name="version" type="epp:versionType"
maxOccurs="unbounded"/>
<element name="lang" type="language"
maxOccurs="unbounded"/>
<any namespace="##other"
maxOccurs="unbounded"/>
<element name="unspec" type="epp:unboundedExtType"
minOccurs="0"/>
</sequence>
</complexType>
<!--
Extension framework types.
-->
Hollenbeck Expires November 30, 2001 [Page 46]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<complexType name="optExtType">
<sequence>
<any namespace="##other"
minOccurs="0"/>
</sequence>
</complexType>
<complexType name="unboundedExtType">
<sequence>
<any namespace="##other"
maxOccurs="unbounded"/>
</sequence>
</complexType>
<!--
An EPP version number is a dotted pair of decimal numbers.
-->
<simpleType name="versionType">
<restriction base="token">
<pattern value="[1-9].[0-9]"/>
<enumeration value="1.0"/>
</restriction>
</simpleType>
<!--
Command types.
-->
<complexType name="commandType">
<sequence>
<element name="creds" type="epp:credsType"
minOccurs="0"/>
<choice>
<element name="check" type="epp:readWriteType"/>
<element name="create" type="epp:readWriteType"/>
<element name="delete" type="epp:readWriteType"/>
<element name="info" type="epp:readWriteType"/>
<element name="login" type="epp:loginType"/>
<element name="logout"/>
<element name="poll" type="epp:pollType"/>
<element name="renew" type="epp:readWriteType"/>
<element name="transfer" type="epp:transferType"/>
<element name="update" type="epp:readWriteType"/>
</choice>
<element name="unspec" type="epp:optExtType"
minOccurs="0"/>
<element name="clTRID" type="epp:trIDStringType"
minOccurs="0"/>
</sequence>
Hollenbeck Expires November 30, 2001 [Page 47]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
</complexType>
<!--
Credentials and options may be specified as part of a <login>
command to create a session, or they may be specified with other
commands to operate in session-less mode. The two modes can not
be mixed.
-->
<complexType name="credsType">
<sequence>
<element name="clID" type="eppcom:clIDType"/>
<element name="pw" type="epp:pwType"/>
<element name="newPW" type="epp:pwType"
minOccurs="0"/>
<element name="options" type="epp:credsOptionsType"/>
</sequence>
</complexType>
<complexType name="credsOptionsType">
<sequence>
<element name="version" type="epp:versionType"/>
<element name="lang" type="language"/>
</sequence>
</complexType>
<simpleType name="pwType">
<restriction base="token">
<minLength value="6"/>
<maxLength value="16"/>
</restriction>
</simpleType>
<!--
The <login> command.
-->
<complexType name="loginType">
<sequence>
<element name="svcs" type="epp:loginSvcType"/>
</sequence>
</complexType>
<complexType name="loginSvcType">
<sequence>
<any namespace="##other"
maxOccurs="unbounded"/>
<element name="unspec" type="epp:unboundedExtType"
minOccurs="0"/>
</sequence>
Hollenbeck Expires November 30, 2001 [Page 48]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
</complexType>
<!--
The <poll> command.
-->
<complexType name="pollType">
<attribute name="op" type="epp:pollOpType"
use="required"/>
<attribute name="msgID" type="token"
use="optional"/>
</complexType>
<simpleType name="pollOpType">
<restriction base="token">
<enumeration value="ack"/>
<enumeration value="req"/>
</restriction>
</simpleType>
<!--
The <transfer> command. This is object-specific, and uses attributes
to identify the requested operation.
-->
<complexType name="transferType">
<sequence>
<any namespace="##other"/>
</sequence>
<attribute name="op" type="epp:transferOpType"
use="required"/>
</complexType>
<simpleType name="transferOpType">
<restriction base="token">
<enumeration value="approve"/>
<enumeration value="cancel"/>
<enumeration value="query"/>
<enumeration value="reject"/>
<enumeration value="request"/>
</restriction>
</simpleType>
<!--
All other object-centric commands. EPP doesn't specify the syntax or
semantics of object-centric command elements. The elements MUST be
described in detail in another schema specific to the object.
-->
<complexType name="readWriteType">
<sequence>
Hollenbeck Expires November 30, 2001 [Page 49]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<any namespace="##other"/>
</sequence>
</complexType>
<complexType name="trIDType">
<sequence>
<element name="clTRID" type="epp:trIDStringType"
minOccurs="0"/>
<element name="svTRID" type="epp:trIDStringType"/>
</sequence>
</complexType>
<simpleType name="trIDStringType">
<restriction base="token">
<minLength value="3"/>
<maxLength value="64"/>
</restriction>
</simpleType>
<!--
Response types.
-->
<complexType name="responseType">
<sequence>
<element name="result" type="epp:resultType"
maxOccurs="unbounded"/>
<element name="msgQ" type="epp:msgQType"
minOccurs="0"/>
<element name="resData" type="epp:optExtType"
minOccurs="0"/>
<element name="unspec" type="epp:optExtType"
minOccurs="0"/>
<element name="roid" type="eppcom:roidType"
minOccurs="0"/>
<element name="trID" type="epp:trIDType"/>
</sequence>
</complexType>
<complexType name="resultType">
<sequence>
<element name="msg" type="epp:msgType"/>
<element name="value" type="string"
minOccurs="0" maxOccurs="unbounded"/>
</sequence>
<attribute name="code" type="epp:resultCodeType"
use="required"/>
</complexType>
Hollenbeck Expires November 30, 2001 [Page 50]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<complexType name="msgQType">
<attribute name="count" type="unsignedLong"
use="optional" default="0"/>
</complexType>
<!--
Human-readable text may be expressed in languages other than English.
-->
<complexType name="msgType">
<simpleContent>
<extension base="normalizedString">
<attribute name="lang" type="language"
use="optional" default="en"/>
<attribute name="id" type="token"
use="optional"/>
</extension>
</simpleContent>
</complexType>
<!--
EPP result codes.
-->
<simpleType name="resultCodeType">
<restriction base="unsignedShort">
<enumeration value="1000"/>
<enumeration value="1300"/>
<enumeration value="1301"/>
<enumeration value="1302"/>
<enumeration value="1500"/>
<enumeration value="2000"/>
<enumeration value="2001"/>
<enumeration value="2002"/>
<enumeration value="2003"/>
<enumeration value="2004"/>
<enumeration value="2005"/>
<enumeration value="2100"/>
<enumeration value="2101"/>
<enumeration value="2102"/>
<enumeration value="2103"/>
<enumeration value="2104"/>
<enumeration value="2105"/>
<enumeration value="2106"/>
<enumeration value="2200"/>
<enumeration value="2201"/>
<enumeration value="2202"/>
<enumeration value="2300"/>
<enumeration value="2301"/>
<enumeration value="2302"/>
Hollenbeck Expires November 30, 2001 [Page 51]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<enumeration value="2303"/>
<enumeration value="2304"/>
<enumeration value="2305"/>
<enumeration value="2306"/>
<enumeration value="2307"/>
<enumeration value="2308"/>
<enumeration value="2400"/>
<enumeration value="2500"/>
<enumeration value="2501"/>
<enumeration value="2502"/>
</restriction>
</simpleType>
<!--
End of schema.
-->
</schema>
Hollenbeck Expires November 30, 2001 [Page 52]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
4.2 Shared Structure Schema
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="urn:iana:xml:ns:eppcom"
xmlns:eppcom="urn:iana:xml:ns:eppcom"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<annotation>
<documentation>
Extensible Provisioning Protocol v1.0
shared structures schema.
</documentation>
</annotation>
<!--
Object authorization information types.
-->
<complexType name="authInfoType">
<simpleContent>
<extension base="normalizedString">
<attribute name="type" type="eppcom:authType"/>
<attribute name="roid" type="eppcom:roidType"
use="optional"/>
</extension>
</simpleContent>
</complexType>
<simpleType name="authType">
<restriction base="token">
<enumeration value="pw"/>
</restriction>
</simpleType>
<!--
<check> result type.
-->
<simpleType name="checkType">
<restriction base="token">
<enumeration value="+"/>
<enumeration value="-"/>
</restriction>
</simpleType>
<!--
Abstract client and object identifier type.
-->
Hollenbeck Expires November 30, 2001 [Page 53]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
<simpleType name="clIDType">
<restriction base="token">
<minLength value="3"/>
<maxLength value="16"/>
</restriction>
</simpleType>
<!--
DNS label type.
-->
<simpleType name="labelType">
<restriction base="token">
<minLength value="1"/>
<maxLength value="255"/>
</restriction>
</simpleType>
<!--
Repository Object IDentifier type.
-->
<simpleType name="roidType">
<restriction base="token">
<pattern value="\w{1,80}-\w{1,8}"/>
</restriction>
</simpleType>
<!--
Transfer status identifiers.
-->
<simpleType name="trStatusType">
<restriction base="token">
<enumeration value="clientApproved"/>
<enumeration value="clientCancelled"/>
<enumeration value="clientRejected"/>
<enumeration value="pending"/>
<enumeration value="serverApproved"/>
<enumeration value="serverCancelled"/>
</restriction>
</simpleType>
<!--
End of schema.
-->
</schema>
Hollenbeck Expires November 30, 2001 [Page 54]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
5. Internationalization Considerations
EPP is represented in XML, which provides native support for encoding
information using the double-byte Unicode character set and its more
compact representations including UTF-8. Compliant XML processors are
REQUIRED to understand both UTF-8 and raw Unicode character sets.
Though XML includes provisions to identify other character set
encodings through use of an "encoding" attribute in an <?xml?>
declaration, EPP use with character sets other than UTF-8 is NOT
RECOMMENDED.
EPP includes a provision for returning a human-readable message with
every result code. This document describes result codes in English,
but the actual text returned with a result MAY be provided in a
language negotiated when a session is established. Languages other
than English MUST be noted through specification of a "lang" attribute
for each message. Valid values for the "lang" attribute and "lang"
negotiation elements are described in [RFC3066] and [ISO639].
All date-time values presented via EPP MUST be expressed in Universal
Coordinated Time using the Gregorian calendar. XML Schema allows use
of time zone identifiers to indicate offsets from the zero meridian,
but this option MUST NOT be used with EPP. Both extended and
truncated date and time forms defined in [ISO8601] MAY be used, though
a server SHOULD use one form or the other consistently.
Hollenbeck Expires November 30, 2001 [Page 55]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
6. IANA Considerations
XML schemas require a URI for unique identification. Schemas MUST be
registered to ensure URI uniqueness, but the IETF does not currently
have a recommended repository for the registration of XML schemas.
This document uses URNs to describe XML namespaces and XML schemas
conforming to a registry mechanism described in [IANA-XML].
IANA SHOULD maintain a registry of XML namespace and schema URI
assignments. URI assignment requests SHOULD be reviewed by a
designated expert, and values SHOULD be assigned only as a result of
standards action taken by the IESG.
This document requests assignment of the following URIs:
urn:iana:xml:ns:epp: The XML namespace URI for EPP.
urn:iana:xml:xmlschema:epp: The XML Schema URI for EPP.
urn:iana:xml:ns:eppcom: The XML namespace URI for EPP shared
structures.
urn:iana:xml:xmlschema:eppcom: The XML Schema URI for EPP shared
structures.
Hollenbeck Expires November 30, 2001 [Page 56]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
7. Security Considerations
EPP provides only simple client authentication services. A passive
attack is sufficient to recover client identifiers and passwords,
allowing trivial command forgery. Protection against most common
attacks and more robust security services MUST be provided by other
protocol layers.
EPP uses a variant of the PLAIN SASL mechanism described in [RFC2595]
to provide a simple application-layer authentication service. Where
the PLAIN SASL mechanism specifies provision of an authorization
identifier, authentication identifier, and password as a single string
separated by ASCII NUL characters, EPP specifies use of a combined
authorization and authentication identifier and a password provided as
distinct XML elements.
Repeated password guessing attempts can be discouraged by limiting the
number of <login> attempts that can be attempted on an open
connection. A server SHOULD close an open connection if three <login>
attempts are made with either an invalid client identifier, an invalid
password, or both an invalid client identifier and an invalid
password.
EPP uses authentication information associated with objects to confirm
object transfer authority. Authentication information exchanged
between EPP clients and third party entities MUST be exchanged using a
facility that provides privacy and integrity services to protect
against unintended disclosure and modification while in transit.
Hollenbeck Expires November 30, 2001 [Page 57]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
8. References
[GRRP] S. Hollenbeck: "Generic Registry-Registrar Protocol
Requirements", work in progress.
[IANA-XML] M. Mealling: "The IANA XML Registry", work in progress.
[ISO639] ISO 639:1988 (E/F): "Code for the representation of names of
languages - The International Organization for Standardization".
[ISO8601] ISO 8601:1988 (E): "Data elements and interchange formats -
Information interchange - Representation of dates and times - The
International Organization for Standardization".
[RFC821] J. Postel: "Simple Mail Transfer Protocol", RFC 821, August
1982.
[RFC2119] S. Bradner: "Key Words for Use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2279] F. Yergeau: "UTF-8, a transformation format of ISO 10646",
RFC 2279, January 1998.
[RFC2595] C. Newman: "Using TLS with IMAP, POP3 and ACAP", RFC 2595,
June 1999.
[RFC3066] H. Alvestrand: "Tags for the Identification of Languages",
BCP 47, RFC 3066, January 2001.
[XML] Editors T. Bray et al.: "Extensible Markup Language (XML) 1.0
(Second Edition)", W3C Recommendation 6 October 2000.
[XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures",
W3C Recommendation 2 May 2001.
[XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2:
Datatypes", W3C Recommendation 2 May 2001.
Hollenbeck Expires November 30, 2001 [Page 58]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
9. Author's Address
Scott Hollenbeck
VeriSign Global Registry Services
21345 Ridgetop Circle
Dulles, VA 20166-6503
USA
shollenbeck@verisign.com
Hollenbeck Expires November 30, 2001 [Page 59]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
A. Revisions From Previous Version
Updated XML examples to use the W3C's Schema Recommendation
specifications. Modified the introduction to remove the statement
describing Schema recommendation status and to more explicitly note
layered transport and security service needs.
Added mention of connection-less operation in the introductory portion
of section 2.
Updated the <greeting> and <login> elements to include identification
of custom unspecified extensions.
Changed <clTRID> to OPTIONAL in multiple sections.
Moved ROID return information from object mappings to the base
protocol specification since ROID form is not object-specific.
Changed "en-US" to "en" in multiple sections to make human-readable
text specifications less US-centric.
Fixed erroneous instances of "<transfer>" where "<update>" was meant
in section 2.9.3.
Rewrote text describing client authorization in all command
description sections.
Removed <auID> descriptions, moving this feature from the base
protocol to the appropriate object mappings to provide more
flexibility.
Modified the Internationalization and IANA Considerations sections to
remove unnecessary references.
Updated references.
Hollenbeck Expires November 30, 2001 [Page 60]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
B. Full Copyright Statement
Copyright (C) The Internet Society 2001. All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of developing
Internet standards in which case the procedures for copyrights defined
in the Internet Standards process must be followed, or as required to
translate it into languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN
WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Hollenbeck Expires November 30, 2001 [Page 61]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
C: Object Mapping Outline
This appendix describes a recommended outline for documenting the EPP
mapping of an object. Documents that describe EPP object mappings
SHOULD describe the mapping in a format similar to the one used here.
Note that additional sections will be required if the object mapping
is written in Internet-Draft format.
1. Introduction
Provide an introduction that describes the object and an overview of
the mapping to EPP.
2. Object Attributes
Describe the attributes associated with the object, including
references to syntax specifications as appropriate. Examples of
object attributes include a name or identifier and dates associated
with modification events.
3. EPP Command Mapping
3.1 EPP Query Commands
3.1.1 EPP <check> Command
Describe the object-specific mappings required to implement the EPP
<check> command. Include both sample commands and sample responses.
3.1.2 EPP <info> Command
Describe the object-specific mappings required to implement the EPP
<info> command. Include both sample commands and sample responses.
3.1.3 EPP <poll> Command
Describe the object-specific mappings required to implement the EPP
<poll> command. Include both sample commands and sample responses.
3.1.4 EPP <transfer> Command
Describe the object-specific mappings required to implement the EPP
<transfer> query command. Include both sample commands and sample
responses.
3.2 EPP Transform Commands
3.2.1 EPP <create> Command
Hollenbeck Expires November 30, 2001 [Page 62]
Internet-Draft Extensible Provisioning Protocol May 30, 2001
Describe the object-specific mappings required to implement the EPP
<create> command. Include both sample commands and sample responses.
Describe the status of the object with respect to time, including
expected client and server behavior if a validity period is used.
3.2.2 EPP <delete> Command
Describe the object-specific mappings required to implement the EPP
<delete> command. Include both sample commands and sample responses.
3.2.3 EPP <renew> Command
Describe the object-specific mappings required to implement the EPP
<renew> command. Include both sample commands and sample responses.
3.2.4 EPP <transfer> Command
Describe the object-specific mappings required to implement the EPP
<transfer> command. Include both sample commands and sample
responses.
3.2.5 EPP <update> Command
Describe the object-specific mappings required to implement the EPP
<update> command. Include both sample commands and sample responses.
4. Formal Syntax
Provide the XML schema for the object mapping. An XML DTD MUST NOT be
used as DTDs do not provide sufficient support for XML namespaces and
strong data typing.
Hollenbeck Expires November 30, 2001 [Page 63]
Html markup produced by rfcmarkup 1.129b, available from
https://tools.ietf.org/tools/rfcmarkup/