[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 RFC 3730

Internet Engineering Task Force                            S. Hollenbeck
Internet-Draft                                            VeriSign, Inc.
June 29, 2001                                 Expires: December 29, 2001

                    Extensible Provisioning Protocol
                    <draft-ietf-provreg-epp-04.txt>

Status of this Memo

  This document is an Internet-Draft and is in full conformance with all
  provisions of Section 10 of RFC2026.

  Internet-Drafts are working documents of the Internet Engineering Task
  Force (IETF), its areas, and its working groups.  Note that other
  groups may also distribute working documents as Internet-Drafts.

  Internet-Drafts are draft documents valid for a maximum of six months
  and may be updated, replaced, or obsoleted by other documents at any
  time.  It is inappropriate to use Internet-Drafts as reference
  material or to cite them other than as "work in progress".

  The list of current Internet-Drafts can be accessed at
  http://www.ietf.org/ietf/1id-abstracts.txt

  The list of Internet-Draft Shadow Directories can be accessed at
  http://www.ietf.org/shadow.html.

Abstract

  This document describes an application layer client-server protocol
  for the provisioning and management of objects stored in a shared
  central repository.  Specified in XML, the protocol defines generic
  object management operations and an extensible framework that maps
  protocol operations to objects.  This document includes a protocol
  specification, an object mapping template, and an XML media type
  registration.

Conventions Used In This Document

  The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
  "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
  document are to be interpreted as described in [RFC2119].

  In examples, "C:" represents lines sent by a protocol client and "S:"
  represents lines returned by a protocol server.  Indentation and white
  space in examples is provided only to illustrate element relationships
  and is not a REQUIRED feature of this protocol.




Hollenbeck             Expires December 29, 2001                [Page 1]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


Table of Contents

  1. Introduction .................................................    3
  2. Protocol Description .........................................    4
  2.1 Protocol Identification .....................................    5
  2.2 Hello Format ................................................    5
  2.3 Greeting Format .............................................    5
  2.4 Command Format ..............................................    7
  2.5 Response Format .............................................    9
  2.6 Protocol Extension Framework ................................   14
  2.7 Server-Defined Extensions ...................................   14
  2.8 Object Identification .......................................   15
  2.9 Protocol Commands ...........................................   16
  2.9.1 Session Management Commands ...............................   16
  2.9.1.1 EPP <login> Command .....................................   16
  2.9.1.2 EPP <logout> Command ....................................   19
  2.9.2 Object Query Commands .....................................   20
  2.9.2.1 EPP <check> Command .....................................   20
  2.9.2.2 EPP <info> Command ......................................   22
  2.9.2.3 EPP <poll> Command ......................................   24
  2.9.2.4 EPP <transfer> Query Command ............................   29
  2.9.3 Object Transform Commands .................................   30
  2.9.3.1 EPP <create> Command ....................................   30
  2.9.3.2 EPP <delete> Command ....................................   32
  2.9.3.3 EPP <renew> Command .....................................   33
  2.9.3.4 EPP <transfer> Command ..................................   35
  2.9.3.5 EPP <update> Command ....................................   38
  3. Result Codes .................................................   40
  4. Formal Syntax ................................................   45
  4.1 Base Schema .................................................   45
  4.2 Shared Structure Schema .....................................   53
  5. Internationalization Considerations ..........................   55
  6. IANA Considerations ..........................................   56
  7. Security Considerations ......................................   57
  8. Acknowledgements .............................................   58
  9. References ...................................................   59
  10. Author's Address ............................................   60
  A. Revisions From Previous Version ..............................   61
  B. Full Copyright Statement .....................................   62
  C: Object Mapping Template ......................................   63
  D: Media Type Registration: application/epp+xml .................   65










Hollenbeck             Expires December 29, 2001                [Page 2]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


1. Introduction

  This document describes specifications for the Extensible Provisioning
  Protocol (EPP) version 1.0, an XML text protocol that permits multiple
  service providers to perform object provisioning operations using a
  shared central object repository.  EPP is specified using the
  Extensible Markup Language (XML) 1.0 as described in [XML] and XML
  Schema notation as described in [XMLS-1] and [XMLS-2].  EPP meets and
  exceeds the requirements for a generic registry registrar protocol as
  described in [GRRP].

  EPP content is identified by MIME media type application/epp+xml.
  Registration information for this media type is included in an
  appendix to this document.

  EPP is intended for use in diverse operating environments where
  transport and security requirements vary greatly.  It is unlikely that
  a single transport or security specification will meet the needs of
  all anticipated operators, so EPP was designed for use in a layered
  protocol environment.  Bindings to specific transport and security
  protocols are outside the scope of this specification.

  This original motivation for this protocol was to provide a standard
  Internet domain name registration protocol for use between domain name
  registrars and domain name registries.  This protocol provides a means
  of interaction between a registrar's applications and registry
  applications.  It is expected that this protocol will have additional
  uses beyond domain name registration.

  XML is case sensitive.  Unless stated otherwise, XML specifications
  and examples provided in this document MUST be interpreted in the
  character case presented to develop a conforming implementation.

  This document is being discussed on the "ietf-provreg" mailing list.
  To join the list, send a message to <majordomo@cafax.se> with the
  words "subscribe ietf-provreg" in the body of the message.  There is a
  web site for the list archives at http://www.cafax.se/ietf-provreg.














Hollenbeck             Expires December 29, 2001                [Page 3]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


2. Protocol Description

  EPP is an XML protocol that can be layered over multiple transport
  protocols.  Protected using lower-layer security protocols, clients
  exchange identification, authentication, and option information, and
  then engage in a series of client-initiated command-response
  exchanges.  All EPP commands are atomic and idempotent.

  EPP provides four basic service elements: service discovery, commands,
  responses, and an extension framework that supports definition of
  managed objects and the relationship of protocol requests and
  responses to those objects.

  A connection-oriented EPP server MUST respond to connection creation
  by returning a greeting to a client.  A connection-less EPP server
  MUST be prompted to provide a greeting to a client.  In both cases, a
  client SHOULD wait for the greeting before sending an EPP command to
  the server.  The server MUST respond to each EPP command with a
  coordinated response that describes the results of processing the
  command.

  EPP commands fall into three categories: session management commands,
  query commands, and data transform commands.  Session management
  commands are used to establish and end persistent sessions with an EPP
  server. Query commands are used to perform read-only object
  information retrieval operations.  Transform commands are used to
  perform read-write object management operations.

  EPP uses XML namespaces to provide an extensible object management
  framework and to identify schemas required for XML instance parsing
  and validation.  These namespaces and schema definitions are used to
  identify both the base protocol schema and the schemas for managed
  objects.

  All XML instances SHOULD begin with an <?xml?> declaration to identify
  the version of XML that is being used, optionally identify use of the
  UTF-8 character set defined in [RFC2279], and optionally to provide a
  hint to an XML parser that an external schema file is needed to
  validate the XML instance. EPP use with character sets other than
  UTF-8 is not described in this document.  Conformant XML parsers are
  required to understand UTF-8, thus the "encoding" attribute is
  OPTIONAL.









Hollenbeck             Expires December 29, 2001                [Page 4]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example XML declarations:

  <?xml version="1.0" encoding="UTF-8" standalone="no"?>

  <?xml version="1.0" standalone="no"?>

  <?xml version="1.0" encoding="UTF-8"?>

  <?xml version="1.0"?>

2.1 Protocol Identification

  All EPP XML instances MUST begin with an <epp> element.  This element
  identifies the start of an EPP protocol element, the namespace used
  within the protocol, and the location of the protocol schema.  This
  start element and the associated ending element MUST be applied to all
  structures sent by both clients and servers.

  Example "start" and "end" EPP elements:

  <epp xmlns="urn:iana:xml:ns:epp-1.0"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  </epp>

2.2 Hello Format

  EPP MAY be carried over both connection-oriented and connection-less
  transport protocols.  An EPP client MAY request a <greeting> from an
  EPP server at any time by sending a <hello> to a server.  Use of this
  element is essential in a connection-less environment where a server
  can not return a <greeting> in response to a client-initiated
  connection.  An EPP <hello> MUST be an empty element with no child
  elements.

  Example <hello>:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <hello/>
  C:</epp>

2.3 Greeting Format

  An EPP server responds to a successful connection and <hello> element



Hollenbeck             Expires December 29, 2001                [Page 5]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  by returning a <greeting> element to the client.  An EPP greeting
  contains the following elements:

  - An <svID> element that contains the name of the server.

  - An <svDate> element that contains the server's current date and time
  in UTC.

  - An <svcMenu> element that identifies the services supported by the
  server, including:

    - One or more <version> elements that identify the protocol versions
    supported by the server.

    - One or more <lang> elements that contain the identifiers of the text
    response languages known by the server.  Language identifiers MUST be
    structured as documented in [RFC3066].  Only language identifiers
    listed in [ISO639] MAY be used.

    - One or more object-specific <obj:svc> elements that identify the
    objects that the server is capable of managing.

    - An OPTIONAL <unspec> (unspecified) element that contains one or more
    object-specific <obj:svc> elements that identify custom object
    extensions supported by the server.

  A server MAY limit object management privileges on a per-client basis.
























Hollenbeck             Expires December 29, 2001                [Page 6]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example greeting:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <greeting>
  S:    <svID>Example Company EPP server epp.example.com</svID>
  S:    <svDate>2000-06-08T22:00:00.0Z</svDate>
  S:    <svcMenu>
  S:      <version>1.0</version>
  S:      <lang>en</lang>
  S:      <lang>fr</lang>
  S:      <obj1:svc xmlns:obj1="urn:iana:xml:ns:obj1"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj1 obj1.xsd"/>
  S:      <obj2:svc xmlns:obj2="urn:iana:xml:ns:obj2"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj2 obj2.xsd"/>
  S:      <obj3:svc xmlns:obj3="urn:iana:xml:ns:obj3"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj3 obj3.xsd"/>
  S:      <unspec>
  S:        <obj1ext:svc xmlns:obj1ext="http://obj1ext-1.0"
  S:         xsi:schemaLocation="http://obj1ext-1.0 obj1ext-1.0.xsd"/>
  S:      </unspec>
  S:    </svcMenu>
  S:  </greeting>
  S:</epp>

2.4 Command Format

  An EPP client interacts with an EPP server by sending commands to the
  server and receiving responses from the server.  Commands and
  responses need not be exchanged serially.  In addition to the standard
  EPP elements, an EPP command contains the following elements:

  - A <creds> (client identity credentials) element that provides client
  identity information.  Use of this element MAY be OPTIONAL or REQUIRED
  depending on how the client wishes to manage sessions with the server.
  A <creds> element contains the following elements:

    - A <clID> element that contains the client identifier assigned to
    the client by the server.

    - A <pw> element that contains the client's plain text password.
    The value of this element is case sensitive.

    - An OPTIONAL <newPW> element that contains a new plain text
    password to be assigned to the client for use with subsequent



Hollenbeck             Expires December 29, 2001                [Page 7]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    <creds> elements. The value of this element is case sensitive.

    - An <options> element that contains the following child elements:

      - A <version> element that contains the protocol version to be
      used for the command or ongoing server session.

      - A <lang> element that contains the text response language to
      be used for the command or ongoing server session commands.

      The values of the <version> and <lang> elements MUST exactly
      match one of the values presented in the EPP greeting.

  - A command element whose tag corresponds to one of the valid EPP
  commands described in this document.  The command element MAY contain
  either protocol-specified or object-specified child elements.

  - An OPTIONAL <unspec> (unspecified) element that MAY be used for
  server-defined command extensions.

  - An OPTIONAL <clTRID> (client transaction identifier) element that
  uniquely identifies the command to the client.

  EPP supports both session-less and session-oriented operating modes,
  though the two operating modes MAY NOT be mixed.  An ongoing server
  session that preserves client identity and authorization information
  MAY be created and ended using the <login> and <logout> commands.
  Commands MAY also be executed outside of an established session
  through use of the <creds> element within the command.

  Session-less operation implies that object service availability and
  client identity MUST be checked on a per-command basis.  Significant
  improvements in server processing performance MAY be realized using
  the protocol's session-oriented operating mode.

















Hollenbeck             Expires December 29, 2001                [Page 8]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example command without credentials:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <info>
  C:      <obj:info xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <obj:name>example</obj:name>
  C:      </obj:info>
  C:    </info>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>


  Example command with credentials:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <creds>
  C:      <clID>ClientX</clID>
  C:      <pw>foo-BAR2</pw>
  C:      <newPW>bar-FOO2</newPW>
  C:      <options>
  C:        <version>1.0</version>
  C:        <lang>en</lang>
  C:      </options>
  C:    </creds>
  C:    <info>
  C:      <obj:info xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <obj:name>example</obj:name>
  C:      </obj:info>
  C:    </info>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>

2.5 Response Format



Hollenbeck             Expires December 29, 2001                [Page 9]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  An EPP server responds to a client command by returning a response to
  the client.  EPP commands are atomic, so a command must either succeed
  completely or fail completely.  Success and failure results MUST NOT
  be mixed.  In addition to the standard EPP elements, an EPP response
  contains the following elements:

  - One or more <result> elements that document the success or failure
  of command execution.  If the command was processed successfully, only
  one <result> element MUST be returned.  If the command was not
  processed successfully, multiple <result> elements MAY be returned to
  document failure conditions.  Each <result> element contains the
  following attribute and child elements:

    - A "code" attribute whose value is a four-digit, decimal number
    that describes the success or failure of the command.

    - A <msg> element containing a human-readable description of the
    response code.  The language of the response is identified via an
    OPTIONAL "lang" attribute.  If not specified, the default attribute
    value MUST be "en" (English).  An OPTIONAL "id" attribute MAY be
    present when responding to an EPP <poll> command.  See the
    description of the <poll> command for more information describing
    the server message queue.

    - Zero or more OPTIONAL <value> elements that echo client-provided
    values that caused server error conditions.

  - An OPTIONAL <msgQ> element containing a "count" attribute that
  identifies the number of service messages queued for client retrieval.
  This element MUST NOT be present if there are no messages queued for
  client retrieval.  This element MAY be present in responses to EPP
  commands other than the <poll> command if messages are queued for
  retrieval.  This element MUST be present in responses to the EPP
  <poll> command if messages are queued for retrieval.  The <msgQ>
  element has one OPTIONAL child element, <qDate>, that provides the
  date and time that a particular message was enqueued.  The <qDate>
  element MUST be present when returning a message in a <poll> response,
  and it MUST be absent otherwise.

  - An OPTIONAL <resData> (response data) element that contains child
  elements specific to the command and associated object.

  - An OPTIONAL <unspec> (unspecified) element that MAY be used for
  server-defined response extensions.

  - A <trID> (transaction identifier) element containing the transaction
  identifier assigned by the server to the command for which the
  response is being returned.  The transaction identifier is formed



Hollenbeck             Expires December 29, 2001               [Page 10]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  using the <clTRID> associated with the command if supplied by the
  client and a <svTRID> (server transaction identifier) that is assigned
  by and unique to the server.

  Transaction identifiers provide command-response synchronization
  integrity.  They SHOULD be logged, retained, and protected to ensure
  that both the client and the server have consistent temporal and state
  management records.

  Example response without <value> or <resData>:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg lang="en">Command completed successfully</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

























Hollenbeck             Expires December 29, 2001               [Page 11]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example response with <resData>:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:name>example</obj:name>
  S:      </obj:creData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>



























Hollenbeck             Expires December 29, 2001               [Page 12]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example response with error <value>:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="2005">
  S:      <msg>Parameter value range error</msg>
  S:      <value>2525</value>
  S:    </result>
  S:    <result code="2006">
  S:      <msg>Parameter value syntax error</msg>
  S:      <value>ex(ample</value>
  S:      <value>abc.ex(ample</value>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>


  Example response with notice of waiting server messages:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <msgQ count="4"/>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  Command success or failure MUST NOT be assumed if no response is
  returned or if a returned response is malformed.  Protocol idempotency
  ensures the safety of retrying a command in cases of response delivery



Hollenbeck             Expires December 29, 2001               [Page 13]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  failure.

2.6 Protocol Extension Framework

  EPP provides an extensible object management framework that defines
  the syntax and semantics of protocol operations applied to a managed
  object.  This framework pushes the definition of each protocol
  operation into the context of a specific object, providing the ability
  to add mappings for new objects without having to modify the base
  protocol.

  Protocol elements that contain data specific to objects are identified
  using XML namespace notation with a reference to an XML schema that
  defines the namespace.  The schema for EPP supports use of dynamic
  object schemas on a per-command and per-response basis.  For example,
  the start of an object-specific command element would be described in
  generic terms as follows:

  C:<EPPCommandName>
  C:  <object:command xmlns:object="urn:iana:xml:ns:object"
  C:   xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
  C:    <!-- One or more object-specific command elements. -->
  C:  </object:command>
  C:</EPPCommandName>

  An object-specific response element would be described similarly:

  S:<resData>
  S:  <object:resData xmlns:object="urn:iana:xml:ns:object"
  S:   xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
  S:    <!-- One or more object-specific response elements. -->
  S:  </object:resData>
  S:</resData>

  This document does not define mappings for specific objects.  The
  mapping of EPP to an object MUST be described in separate documents
  that specifically address each command and response in the context of
  the object.  A suggested object mapping outline is included as an
  appendix to this document.

2.7 Server-Defined Extensions

  EPP provides a facility for unspecified protocol command and response
  extensions.  Protocol commands and responses MAY be extended by an
  <unspec> element that contains additional elements whose syntax and
  semantics are not explicitly defined by EPP or an EPP object mapping.
  This element is OPTIONAL and MAY be empty. These extensions are
  typically defined by agreement between client and server and MAY be



Hollenbeck             Expires December 29, 2001               [Page 14]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  used to extend EPP for unique operational needs.  A server-extended
  command element would be described in generic terms as follows:

  C:<EPPCommandName>
  C:  <object:command xmlns:object="urn:iana:xml:ns:object"
  C:   xsi:schemaLocation="urn:iana:xml:ns:object object.xsd">
  C:    <!-- One or more object-specific command elements. -->
  C:  </object:command>
  C:  <unspec>
  C:    <!-- One or more server-defined elements. -->
  C:  </unspec>
  C:</EPPCommandName>

  An server-extended response element would be described similarly:

  S:<response>
  S:  <result code="1000">
  S:    <msg lang="en">Command completed successfully</msg>
  S:  </result>
  S:  <unspec>
  S:    <!-- One or more server-defined elements. -->
  S:  </unspec>
  S:  <trID>
  S:    <clTRID>ABC-12345</clTRID>
  S:    <svTRID>54321-XYZ</svTRID>
  S:  </trID>
  S:</response>

  This document does not define any specific server extensions.  The
  mapping of server extensions to EPP MUST be described in separate
  documents that specifically address extended commands and responses in
  the server's operational context.

2.8 Object Identification

  Some objects, such as name servers and contacts, MAY have utility in
  multiple repositories.  However, maintaining disjoint copies of object
  information in multiple repositories can lead to inconsistencies that
  have adverse consequences for the Internet.  For example, changing a
  name server name in one repository, but not in a second repository
  that refers to the server for domain name delegation, can produce
  unexpected DNS query results.

  Globally unique identifiers can help facilitate object information
  sharing between repositories.  A globally unique identifier MUST be
  assigned to every object when the object is created, and the
  identifier MUST be returned within the response for the command that
  created the object.  Specific identifier values are a matter of



Hollenbeck             Expires December 29, 2001               [Page 15]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  repository policy, but they SHOULD be constructed according to the
  following algorithm:

  a) Divide the provisioning repository world into a number of object
  repository classes.

  b) Each repository within a class is assigned an identifier that is
  maintained by IANA.

  (c) Each repository is responsible for assigning a unique local
  identifier for each object within the repository.

  (d) The globally unique identifier is a concatenation of the local
  identifier, followed by a hyphen ("-"), followed by the repository
  identifier.

2.9 Protocol Commands

  EPP provides commands to manage sessions, retrieve object information,
  and perform transformation operations on objects.  All EPP commands
  are atomic and idempotent, either succeeding completely or failing
  completely and producing predictable results in case of repeated
  execution.  This section describes each EPP command, including
  examples with representative server responses.

2.9.1 Session Management Commands

  EPP provides two commands for session management: <login> to establish
  a session with a server, and <logout> to end a session with a server.
  The <login> command establishes an ongoing server session that
  preserves client identity and authorization information during the
  duration of the session.  Alternatively, identity credentials MAY be
  provided with an EPP command to facilitate session-less operation.

  Session-oriented and session-less operating modes MUST NOT be mixed.
  Commands other than the <login> command MUST NOT include identity
  credentials when submitted after successfully processing a <login>
  command.

2.9.1.1 EPP <login> Command

  The EPP <login> command is used to establish a session with an EPP
  server in response to a greeting issued by the server.  A <login>
  command MUST be sent to a server before any other EPP command.

  A client identifier and initial password MUST be created on the server
  before a client can successfully complete a <login> command.  The
  client identifier and initial password MUST be delivered to the client



Hollenbeck             Expires December 29, 2001               [Page 16]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  using an out-of-band method that protects the identifier and password
  from inadvertent disclosure.

  A <creds> element MUST be provided with the <login> command.  Once a
  session has been established with the <login> command, subsequent
  commands MUST NOT include a <creds> element.

  In addition to the standard EPP command elements, the <login> command
  contains the following child elements:

  - A <svcs> element that contains one or more object <svc> elements
  that identify the objects and unspecified extensions to be managed
  during the session.  The <svcs> element MAY contain an OPTIONAL
  <unspec> (unspecified) element that contains one or more object-
  specific <obj:svc> elements that identify custom object extensions
  supported by the server.

  The PLAIN SASL mechanism presented in [RFC2595] describes a format for
  providing a user identifier, an authorization identifier, and a
  password as part of a single plain text string.  The EPP
  authentication mechanism is similar, though EPP does not require a
  session-level authorization identifier and the user identifier and
  password are separated into distinct XML elements.  Additional
  identification and authorization schemes MUST be provided at other
  protocol layers to provide more robust security services.


























Hollenbeck             Expires December 29, 2001               [Page 17]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <login> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <creds>
  C:      <clID>ClientX</clID>
  C:      <pw>foo-BAR2</pw>
  C:      <newPW>bar-FOO2</newPW>
  C:      <options>
  C:        <version>1.0</version>
  C:        <lang>en</lang>
  C:      </options>
  C:    </creds>
  C:    <login>
  C:      <svcs>
  C:        <obj1:svc xmlns:obj1="urn:iana:xml:ns:obj1"
  C:         xsi:schemaLocation="urn:iana:xml:ns:obj1 obj1.xsd"/>
  C:        <obj2:svc xmlns:obj2="urn:iana:xml:ns:obj2"
  C:         xsi:schemaLocation="urn:iana:xml:ns:obj2 obj2.xsd"/>
  C:        <obj3:svc xmlns:obj3="urn:iana:xml:ns:obj3"
  C:         xsi:schemaLocation="urn:iana:xml:ns:obj3 obj3.xsd"/>
  C:        <unspec>
  C:          <obj1ext:svc xmlns:obj1ext="http://custom/obj1ext"
  C:           xsi:schemaLocation="http://custom/obj1ext obj1ext.xsd"/>
  C:        </unspec>
  C:      </svcs>
  C:    </login>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>

  When a <login> command has been processed successfully, a server MUST
  respond with an EPP response with no <resData> element.  If
  successful, the server will respond by creating and maintaining a new
  session that SHOULD be terminated by a future <logout> command.











Hollenbeck             Expires December 29, 2001               [Page 18]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <login> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <login> command is used to establish a session with an EPP
  server.  A <login> command MUST be rejected if received within the
  bounds of an existing session.  This action MUST be open to all
  authorized clients.

2.9.1.2 EPP <logout> Command

  The EPP <logout> command is used to end a session with an EPP server.
  The <logout> command MUST be represented as an empty element with no
  child elements.

  A server MAY also end a session asynchronously due to client
  inactivity or excessive client session longevity.  The parameters for
  determining excessive client inactivity or session longevity are a
  matter of server policy and are not specified by this protocol.

  Example <logout> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <logout/>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>




Hollenbeck             Expires December 29, 2001               [Page 19]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  When a <logout> command has been processed successfully, a server MUST
  respond with an EPP response with no <resData> element.  If
  successful, the server MUST also end the current session.

  Example <logout> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1500">
  S:      <msg>Command completed successfully; ending session</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <logout> command is used to end a session with an EPP server.
  A <logout> command MUST be rejected if the command has not been
  preceded by a successful <login> command.  This action MUST be open to
  all authorized clients.

2.9.2 Object Query Commands

  EPP provides four commands to retrieve object information: <check> to
  determine if an object is known to the server, <info> to retrieve
  detailed information associated with a known object, <poll> to receive
  service notifications from the server, and <transfer> to retrieve
  object transfer status information.

2.9.2.1 EPP <check> Command

  The EPP <check> command is used to determine if an object exists in
  the server repository.  The elements needed to identify an object are
  object-specific, so the child elements of the <check> command are
  specified using the EPP extension framework.  In addition to the
  standard EPP command elements, the <check> command contains the
  following child elements:

  - An object-specific <obj:check> element that identify the objects to
  be queried.  Multiple objects of the same type MAY be queried within a
  single <check> command.




Hollenbeck             Expires December 29, 2001               [Page 20]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <check> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <check>
  C:      <obj:check xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <obj:name>example1</obj:name>
  C:        <obj:name>example2</obj:name>
  C:        <obj:name>example3</obj:name>
  C:      </obj:check>
  C:    </check>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When a <check> command has been processed successfully, a server MUST
  respond with an EPP <resData> element that MUST contain a child
  element that identifies the object namespace and the location of the
  object schema.  The child elements of the <resData> element are
  object-specific, though the EPP <resData> element MUST contain a child
  <obj:chkData> element that contains the following child elements and
  attributes:

  - One or more <obj:cd> (check data) elements that echo the object
  identifiers provided in the command and contain an "x" attribute whose
  value identifies the object as either "+" for a known object or "-"
  for an unknown object.


















Hollenbeck             Expires December 29, 2001               [Page 21]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <check> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:chkData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:cd x="+">example1</obj:cd>
  S:        <obj:cd x="-">example2</obj:cd>
  S:        <obj:cd x="+">example3</obj:cd>
  S:      </obj:chkData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <check> command is used to determine if an object exists in
  the server repository.  This action MUST be open to all authorized
  clients.

2.9.2.2 EPP <info> Command

  The EPP <info> command is used to retrieve information associated with
  an existing object.  The elements needed to identify an object and the
  type of information associated with an object are both object-
  specific, so the child elements of the <info> command are specified
  using the EPP extension framework.  In addition to the standard EPP
  command elements, the <info> command contains the following child
  elements:

  - An object-specific <obj:info> element that identifies the object to
  be queried.








Hollenbeck             Expires December 29, 2001               [Page 22]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <info> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <info>
  C:      <obj:info xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:info>
  C:    </info>
  C:  </command>
  C:</epp>

  When an <info> command has been processed successfully, a server MUST
  respond with an EPP <resData> element that MUST contain a child
  element that identifies the object namespace and the location of the
  object schema and the Repository Object Identifier (ROID) that was
  assigned to the object when the object was created.  Other child
  elements of the <resData> element are object-specific.

  Example <info> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:infData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:roid>EXAMPLE1-VRSN</obj:roid>
  S:        <!-- Object-specific elements. -->
  S:      </obj:infData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>



Hollenbeck             Expires December 29, 2001               [Page 23]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  The EPP <info> command is used to retrieve information associated with
  an existing object.  This action SHOULD be limited to authorized
  clients; restricting this action to the sponsoring client is
  RECOMMENDED.

2.9.2.3 EPP <poll> Command

  The EPP <poll> command is used to discover and retrieve service
  messages queued by a server for individual clients.  A <poll> command
  MUST return the first message from the message queue.  Each response
  returned from the server includes a server-unique message identifier
  that MUST be provided to acknowledge receipt of the message, and a
  counter that indicates the number of messages in the queue.  As a
  message is received by the client, the client MUST respond to the
  message with an explicit acknowledgement to confirm that the message
  has been received.  A server MUST dequeue the message and decrement
  the queue counter after receiving acknowledgement from the client,
  making the next message in the queue (if any) available for retrieval.

  Multiple message types MAY be available for client retrieval.  EPP
  <transfer> actions MUST be reported to all clients involved in the
  transfer process through queued messages describing the transfer
  action using the same object-specific forms specified for <transfer>
  command responses.  Other types of service information MAY be defined
  and delivered as a matter of server policy.  Server operators SHOULD
  consider time-sensitivity and resource management factors when
  selecting a delivery method for service information because some
  message types MAY be reasonably delivered using non-protocol methods
  that require fewer server resources.

  Message queues can consume server resources if clients do not retrieve
  and acknowledge messages on a regular basis.  Servers MAY implement
  other mechanisms to dequeue and deliver messages if queue maintenance
  needs exceed resource consumption limits.

  Some of the information returned in response to a <poll> command MAY
  be object-specific, so some child elements of the <poll> response MAY
  be specified using the EPP extension framework.  The <poll> command
  MUST be represented as an empty element with no child elements.  An
  "op" attribute with value "req" is REQUIRED to retrieve the first
  message from the server message queue.  An "op" attribute (with value
  "ack") and a "msgID" attribute (whose value corresponds to the value
  of the "id" attribute copied from the <msg> element in the message
  being acknowledged) are REQUIRED to acknowledge receipt of a message.







Hollenbeck             Expires December 29, 2001               [Page 24]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <poll> request command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <poll op="req"/>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>

  The returned result code identifies responses with message information
  returned in response to a <poll> command.



































Hollenbeck             Expires December 29, 2001               [Page 25]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <poll> response with object-specific information:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1301">
  S:      <msg id="12345">Transfer requested.</msg>
  S:    </result>
  S:    <msgQ count="5"/>
  S:      <qDate>2000-06-08T22:00:00.0Z</qDate>
  S:    </msgQ>
  S:    <resData>
  S:      <obj:trnData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:name>example</obj:name>
  S:        <obj:trStatus>pending</obj:trStatus>
  S:        <obj:reID>ClientX</obj:reID>
  S:        <obj:reDate>2000-06-08T22:00:00.0Z</obj:reDate>
  S:        <obj:acID>ClientY</obj:acID>
  S:        <obj:acDate>2000-06-13T22:00:00.0Z</obj:acDate>
  S:        <obj:exDate>2002-09-08T22:00:00.0Z</obj:exDate>
  S:      </obj:trnData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  A client MUST acknowledge each response to dequeue the message and
  make subsequent messages available for retrieval.















Hollenbeck             Expires December 29, 2001               [Page 26]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <poll> acknowledgement command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <poll op="ack" msgID="12345"/>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  A <poll> acknowledgement response notes the ID of the message that has
  been acknowledged and the number of messages remaining in the queue.

  Example <poll> acknowledgement response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg id="12345">Command completed successfully</msg>
  S:    </result>
  S:    <msgQ count="4"/>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  Service messages MAY also be returned without object information.














Hollenbeck             Expires December 29, 2001               [Page 27]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <poll> response without object-specific information:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1301">
  S:      <msg id="12346">Credit balance low.</msg>
  S:    </result>
  S:    <msgQ count="4">
  S:      <qDate>2000-06-08T22:10:00.0Z</qDate>
  S:    </msgQ>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The returned result code and message is used to note an empty server
  message queue.

  Example <poll> response to note an empty message queue:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1300">
  S:      <msg>Command completed successfully; no messages</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <poll> command is used to discover and retrieve client service
  messages from a server.  This action SHOULD be limited to authorized
  clients; queuing service messages and limiting queue access on a per-
  client basis is RECOMMENDED.




Hollenbeck             Expires December 29, 2001               [Page 28]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


2.9.2.4 EPP <transfer> Query Command

  The EPP <transfer> command provides a query operation that allows a
  client to determine real-time status of pending and completed transfer
  requests.  The elements needed to identify an object that is the
  subject of a transfer request are object-specific, so the child
  elements of the <transfer> query command are specified using the EPP
  extension framework.  In addition to the standard EPP command
  elements, the <transfer> command contains an "op" attribute with value
  "query", and the following child elements:

  - An object-specific <obj:transfer> element that identifies the object
  whose transfer status is requested.

  Example <transfer> query command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <transfer op="query">
  C:      <obj:transfer xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:transfer>
  C:    </transfer>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When an <transfer> query command has been processed successfully, a
  server MUST respond with an EPP <resData> element that MUST contain a
  child element that identifies the object namespace and the location of
  the object schema.  The child elements of the <resData> element are
  object-specific, but they MUST include elements that identify the
  object, the status of the transfer, the identifier of the client that
  requested the transfer, the date and time that the request was made,
  the identifier of the client that SHOULD act upon the request, the
  date and time by which an action is expected, and an OPTIONAL date and
  time noting changes in the object's validity period (if applicable)
  that occur as a result of the transfer.








Hollenbeck             Expires December 29, 2001               [Page 29]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <transfer> query response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:trnData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:name>example</obj:name>
  S:        <obj:trStatus>pending</obj:trStatus>
  S:        <obj:reID>ClientX</obj:reID>
  S:        <obj:reDate>2000-06-08T22:00:00.0Z</obj:reDate>
  S:        <obj:acID>ClientY</obj:acID>
  S:        <obj:acDate>2000-06-13T22:00:00.0Z</obj:acDate>
  S:        <obj:exDate>2002-09-08T22:00:00.0Z</obj:exDate>
  S:      </obj:trnData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <transfer> command provides a query operation that allows a
  client to determine real-time status of pending and completed transfer
  requests.  This action SHOULD be limited to authorized clients;
  restricting queries to the requesting and responding clients is
  RECOMMENDED.  Object transfer MAY be unavailable or limited by
  object-specific policies.

2.9.3 Object Transform Commands

  EPP provides five commands to transform objects: <create> to create an
  instance of an object with a server, <delete> to remove an instance of
  an object from a server, <renew> to extend the validity period of an
  object, <update> to change information associated with an object, and
  <transfer> to manage changes in client sponsorship of an object.

2.9.3.1 EPP <create> Command




Hollenbeck             Expires December 29, 2001               [Page 30]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  The EPP <create> command is used to create an instance of an object.
  An object may be created for an indefinite period of time, or an
  object may be created for a specific validity period.  The EPP mapping
  for an object MUST describe the status of an object with respect to
  time, to include expected client and server behavior if a validity
  period is used.

  The elements needed to identify an object and associated attributes
  are object-specific, so the child elements of the <create> command are
  specified using the EPP extension framework.  In addition to the
  standard EPP command elements, the <create> command contains the
  following child elements:

  - An object-specific <obj:create> element that identifies the object
  to be created and the elements that are required to create the object.

  Example <create> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <create>
  C:      <obj:create xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:create>
  C:    </create>
  C:    <unspec/>
  C:    <clTRID>ABC-12345</clTRID>
  C:  </command>
  C:</epp>

  When a <create> command has been processed successfully, a server MUST
  respond with an EPP <resData> element that MUST contain a child
  element that identifies the object namespace and the location of the
  object schema.  The child elements of the <resData> element are
  object-specific.












Hollenbeck             Expires December 29, 2001               [Page 31]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <create> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <!-- Object-specific elements. -->
  S:      </obj:creData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12345</clTRID>
  S:      <svTRID>54321-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <create> command is used to create an instance of an object.
  This action SHOULD be limited to authorized clients and MAY be
  restricted on a per-client basis.

2.9.3.2 EPP <delete> Command

  The EPP <delete> command is used to remove an instance of an existing
  object.  The elements needed to identify an object are object-
  specific, so the child elements of the <delete> command are specified
  using the EPP extension framework.  In addition to the standard EPP
  command elements, the <delete> command contains the following child
  elements:

  - An object-specific <obj:delete> element that identifies the object
  to be deleted.











Hollenbeck             Expires December 29, 2001               [Page 32]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <delete> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <delete>
  C:      <obj:delete xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:delete>
  C:    </delete>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When a <delete> command has been processed successfully, a server MUST
  respond with an EPP response with no <resData> element.

  Example <delete> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <delete> command is used to remove an instance of an existing
  object.  This action SHOULD be limited to authorized clients;
  restricting this action to the sponsoring client is RECOMMENDED.

2.9.3.3 EPP <renew> Command

  The EPP <renew> command is used to extend the validity period of an
  existing object.  The elements needed to identify and extend the



Hollenbeck             Expires December 29, 2001               [Page 33]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  validity period of an object are object-specific, so the child
  elements of the <renew> command are specified using the EPP extension
  framework.  In addition to the standard EPP command elements, the
  <renew> command contains the following child elements:

  - An object-specific <obj:renew> element that identifies the object to
  be renewed and the elements that are required to extend the validity
  period of the object.

  Example <renew> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <renew>
  C:      <obj:renew xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:renew>
  C:    </renew>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When a <renew> command has been processed successfully, a server MUST
  respond with an EPP <resData> element that MUST contain a child
  element that identifies the object namespace and the location of the
  object schema.  The child elements of the <resData> element are
  object-specific.



















Hollenbeck             Expires December 29, 2001               [Page 34]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <renew> response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:creData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <!-- Object-specific elements. -->
  S:      </obj:creData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <renew> command is used to extend the validity period of an
  existing object.  This action SHOULD be limited to authorized clients;
  restricting this action to the sponsoring client is RECOMMENDED.
  Object renewal MAY be unavailable or limited by object-specific
  policies.

2.9.3.4 EPP <transfer> Command

  The EPP <transfer> command is used to manage changes in client
  sponsorship of an existing object.  Clients may initiate a transfer
  request, cancel a transfer request, approve a transfer request, and
  reject a transfer request using the "op" command attribute.

  A client who wishes to assume sponsorship of a known object from
  another client uses the <transfer> command with the value of the "op"
  attribute set to "request".  Once a transfer has been requested, the
  same client may cancel the request using a <transfer> command with the
  value of the "op" attribute set to "cancel".  A request to cancel the
  transfer MUST be sent to the server before the current sponsoring
  client either approves or rejects the transfer request and before the
  server automatically processes the request due to responding client
  inactivity.




Hollenbeck             Expires December 29, 2001               [Page 35]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  Once a transfer request has been received by the server, the server
  MUST notify the current sponsoring client of the requested transfer by
  queuing a service message for retrieval via the <poll> command.  The
  current status of a pending <transfer> command for any object MAY be
  found using the <transfer> query command.

  The current sponsoring client MAY explicitly approve or reject the
  transfer request.  The client may approve the request using a
  <transfer> command with the value of the "op" attribute set to
  "approve".  The client may reject the request using a <transfer>
  command with the value of the "op" attribute set to "reject".

  A server MAY automatically approve or reject all transfer requests
  that are not explicitly approved or rejected by the current sponsoring
  client within a fixed amount of time.  The amount of time to wait for
  explicit action and the default server behavior are local matters not
  specified by EPP, but they SHOULD be documented in a server-specific
  profile document that describes default server behavior for client
  information.

  Objects MAY have associated authorization information that MUST be
  provided to complete a <transfer> command.  The type of authorization
  information required is object-specific; passwords or more complex
  mechanisms based on public key cryptography are typical.

  The elements needed to identify and complete the transfer of an object
  are object-specific, so the child elements of the <transfer> command
  are specified using the EPP extension framework.  In addition to the
  standard EPP command elements, the <transfer> command contains the
  following child elements:

  - An object-specific <obj:transfer> element that identifies the object
  to be transferred and the elements that are required to process the
  transfer command.

















Hollenbeck             Expires December 29, 2001               [Page 36]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <transfer> request command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <transfer op="request">
  C:      <obj:transfer xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:transfer>
  C:    </transfer>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When an <transfer> command has been processed successfully, a server
  MUST respond with an EPP <resData> element that MUST contain a child
  element that identifies the object namespace and the location of the
  object schema.  The child elements of the <resData> element are
  object-specific, but they MUST include elements that identify the
  object, the status of the transfer, the identifier of the client that
  requested the transfer, the date and time that the request was made,
  the identifier of the client that SHOULD act upon the request, the
  date and time by which an action is expected, and an OPTIONAL date and
  time noting changes in the object's validity period (if applicable)
  that occur as a result of the transfer.





















Hollenbeck             Expires December 29, 2001               [Page 37]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001



  Example <transfer> request response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <resData>
  S:      <obj:trnData xmlns:obj="urn:iana:xml:ns:obj"
  S:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  S:        <obj:name>example</obj:name>
  S:        <obj:trStatus>pending</obj:trStatus>
  S:        <obj:reID>ClientX</obj:reID>
  S:        <obj:reDate>2000-06-08T22:00:00.0Z</obj:reDate>
  S:        <obj:acID>ClientY</obj:acID>
  S:        <obj:acDate>2000-06-13T22:00:00.0Z</obj:acDate>
  S:        <obj:exDate>2002-09-08T22:00:00.0Z</obj:exDate>
  S:      </obj:trnData>
  S:    </resData>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <transfer> command is used to manage changes in client
  sponsorship of an existing object.  This action SHOULD be limited to
  authorized clients; restricting <transfer> requests to a client other
  than the current sponsoring client, <transfer> approval requests to
  the current sponsoring client, and <transfer> cancellation requests to
  the original requesting client is RECOMMENDED.  Object transfer MAY be
  unavailable or limited by object-specific policies.

2.9.3.5 EPP <update> Command

  The EPP <update> command is used to change information associated with
  an existing object.  The elements needed to identify and modify an
  object are object-specific, so the child elements of the <update>
  command are specified using the EPP extension framework.  In addition
  to the standard EPP command elements, the <update> command contains
  the following child elements:




Hollenbeck             Expires December 29, 2001               [Page 38]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  - An object-specific <obj:update> element that identifies the object
  to be updated and the elements that are required to modify the object.
  Object-specific elements MUST identify values to be added, values to
  be removed, or values to be changed.

  Example <update> command:

  C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  C:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  C:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  C:  <command>
  C:    <update>
  C:      <obj:update xmlns:obj="urn:iana:xml:ns:obj"
  C:       xsi:schemaLocation="urn:iana:xml:ns:obj obj.xsd">
  C:        <!-- Object-specific elements. -->
  C:      </obj:update>
  C:    </update>
  C:    <unspec/>
  C:    <clTRID>ABC-12346</clTRID>
  C:  </command>
  C:</epp>

  When an <update> command has been processed successfully, a server
  MUST respond with an EPP response with no <resData> element.

  Example <update> request response:

  S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
  S:<epp xmlns="urn:iana:xml:ns:epp-1.0"
  S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  S:     xsi:schemaLocation="urn:iana:xml:ns:epp-1.0 epp-1.0.xsd">
  S:  <response>
  S:    <result code="1000">
  S:      <msg>Command completed successfully</msg>
  S:    </result>
  S:    <unspec/>
  S:    <trID>
  S:      <clTRID>ABC-12346</clTRID>
  S:      <svTRID>54322-XYZ</svTRID>
  S:    </trID>
  S:  </response>
  S:</epp>

  The EPP <update> command is used to change information associated with
  an existing object.  This action SHOULD be limited to authorized
  clients; restricting this action to the sponsoring client is
  RECOMMENDED.



Hollenbeck             Expires December 29, 2001               [Page 39]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


3. Result Codes

  EPP result codes are based on the Theory of Reply Codes described in
  Appendix E of [RFC821].  EPP uses four decimal digits to describe the
  success or failure of each EPP command.  Each of the digits of the
  reply have special significance.

  The first digit denotes command success or failure.  The second digit
  denotes the response category, such as command syntax or security.
  The third and fourth digits provide explicit response detail within
  each response category.

  There are two values for the first digit of the reply code:

  1yzz   Positive completion reply.  The command has been accepted and
  processed by the system without error.

  2yzz   Negative completion reply.  The command was not accepted and
  the requested action did not occur.

  The second digit groups responses into one of six specific categories:

  x0zz   Protocol Syntax
  x1zz   Implementation-specific Rules
  x2zz   Security
  x3zz   Data Management
  x4zz   Server System
  x5zz   Connection Management

  The third and fourth digits provide response detail within the
  categories defined by the first and second digits.  Specific result
  codes are listed in the table below.

  Every EPP response MUST include a result code and a human-readable
  description of the result code.  The language used to represent the
  description MAY be identified using an instance of the "lang"
  attribute within the <msg> element.  If not specified, the default
  language is English, identified as "en".  A description of the
  structure of valid values for the "lang" attribute is described in
  [RFC3066].  A list of valid values for the "lang" attribute is
  available in [ISO639].

  Response text MAY be translated into other languages, though the
  translation MUST preserve the meaning of the code as described here.
  Response code values MUST NOT be changed when translating text.

  Response text in the table below is enclosed in quotes to clearly mark
  the beginning and ending of each response string.  Quotes MUST NOT be



Hollenbeck             Expires December 29, 2001               [Page 40]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  used to delimit these strings when returning response text via the
  protocol.

  Successful command completion responses:

  Code    Response text in US English
  ___________________________________

  1000    "Command completed successfully"
  This is the nominal response code for a successfully completed
  command.  This response code MUST be returned in responses for all
  commands other than for the situations relating to the <logout>,
  <poll>, and <update> commands as described here.

  1300    "Command completed successfully; no messages"
  This response code MUST be returned when responding to a <poll>
  request command and the server message queue is empty.

  1301    <None specified>
  This response code MUST be returned when returning a <poll> service
  message to a client.  Message text for this response code is a
  matter of server policy and is not specified by this protocol.

  1500    "Command completed successfully; ending session"
  This response code MUST be returned when responding to a successful
  <logout> command.

  Command error responses:

  Code    Response text in US English
  ___________________________________

  2000    "Unknown command"
  This response code MUST be returned when a server receives a command
  element that is not defined by EPP.

  2001    "Command syntax error"
  This response code MUST be returned when a server receives an
  improperly formed command element.

  2002    "Command use error"
  This response code MUST be returned when a server receives a properly
  formed command element, but the command can not be executed due to a
  sequencing or context error.  For example, a <logout> command can not
  be executed without having first completed a <login> command.

  2003    "Required parameter missing"
  This response code MUST be returned when a server receives a command



Hollenbeck             Expires December 29, 2001               [Page 41]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  for which a required parameter value has not been provided.

  2004    "Parameter value range error"
  This response code MUST be returned when a server receives a command
  parameter whose value is outside the range of values specified
  by the protocol.  The error value SHOULD be returned via a <value>
  element in the EPP response.

  2005    "Parameter value syntax error"
  This response code MUST be returned when a server receives a command
  containing a parameter whose value is improperly formed.  The error
  value SHOULD be returned via a <value> element in the EPP response.

  2100    "Unimplemented protocol version"
  This response code MUST be returned when a server receives a command
  element specifying a protocol version that is not implemented by the
  server.

  2101    "Unimplemented command"
  This response code MUST be returned when a server receives a valid
  EPP command element that is not implemented by the server.  For
  example, a <transfer> command MAY be unimplemented for certain object
  types.

  2102    "Unimplemented option"
  This response code MUST be returned when a server receives a valid
  EPP command element that contains a protocol option that is not
  implemented by the server.  For example, a server MAY not implement
  the protocol's session-less operating mode.

  2103    "Unimplemented extension"
  This response code MUST be returned when a server receives a valid
  EPP command element that contains a protocol command extension that
  is not implemented by the server.

  2104    "Billing failure"
  This response code MUST be returned when a server attempts to execute
  a billable operation and the command can not be completed due to a
  client billing failure.

  2105    "Object is not eligible for renewal"
  This response code MUST be returned when a client attempts to <renew>
  an object that is not eligible for renewal in accordance with server
  policy.

  2106    "Object is not eligible for transfer"
  This response code MUST be returned when a client attempts to
  <transfer> an object that is not eligible for transfer in accordance



Hollenbeck             Expires December 29, 2001               [Page 42]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  with server policy.

  2200    "Authentication error"
  This response code MUST be returned when a server notes an error when
  validating client credentials.

  2201    "Authorization error"
  This response code MUST be returned when a server notes a client
  authorization error when executing a command.  This error is used to
  note that a client lacks privileges to execute the requested command.

  2202    "Invalid authorization information"
  This response code MUST be returned when a server receives invalid
  command authorization information required to confirm authorization to
  execute a command.  This error is used to note that a client has the
  privileges required to execute the requested command, but the
  authorization information provided by the client does not match the
  authorization information archived by the server.

  2300    "Object pending transfer"
  This response code MUST be returned when a server receives a command
  to transfer an object that is pending transfer due to an earlier
  transfer request.

  2301    "Object not pending transfer"
  This response code MUST be returned when a server receives a command
  to confirm, reject, or cancel the transfer an object when no command
  has been made to transfer the object.

  2302    "Object exists"
  This response code MUST be returned when a server receives a command
  to create an object that already exists in the repository.

  2303    "Object does not exist"
  This response code MUST be returned when a server receives a command
  to query or transform an object that does not exist in the repository.

  2304    "Object status prohibits operation"
  This response code MUST be returned when a server receives a command
  to transform an object that can not be completed due to server policy
  or business practices.  For example, a server MAY disallow <transfer>
  commands under terms and conditions that are matters of local policy,
  or the server may have received a <delete> command for an object
  whose status prohibits deletion.

  2305    "Object association prohibits operation"
  This response code MUST be returned when a server receives a command
  to transform an object that can not be completed due to dependencies



Hollenbeck             Expires December 29, 2001               [Page 43]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  on other objects that are associated with the target object.  For
  example, a server MAY disallow <delete> commands while an object has
  active associations with other objects.

  2306    "Parameter value policy error"
  This response code MUST be returned when a server receives a command
  containing a parameter value that is syntactically valid, but
  semantically invalid due to local policy.  For example, the server
  MAY support a subset of a range of valid protocol parameter values.
  The error value SHOULD be returned via a <value> element in the EPP
  response.

  2307    "Unimplemented object service"
  This response code MUST be returned when a server receives a command
  to operate on an object service that is not supported by the server.

  2308    "Data management policy violation"
  This response code MUST be returned when a server receives a command
  whose execution results in a violation of server data management
  policies.  For example, removing all attribute values or object
  associations from an object MAY be a violation of a server's data
  management policies.

  2400    "Command failed"
  This response code MUST be returned when a server is unable to
  execute a command due to an internal server error that is not related
  to the protocol.  The failure MAY be transient.  The server MUST keep
  any ongoing session active.

  2500    "Command failed; server ending session"
  This response code MUST be returned when a server receives a command
  that can not be completed due to an internal server error that is not
  related to the protocol.  The failure is not transient, and will
  cause other commands to fail as well.  The server MUST end any
  ongoing active session.

  2501    "Timeout; server ending session"
  This response code MUST be returned when a server receives a command
  that can not be completed due to a session-oriented timeout.

  2502    "Session limit exceeded; server closing connection"
  This response code MUST be returned when a server receives a <login>
  command, and the command can not be completed because the client has
  exceeded a system-defined limit on the number of sessions that the
  client can establish. It may be possible to establish a session by
  ending existing unused sessions.





Hollenbeck             Expires December 29, 2001               [Page 44]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


4. Formal Syntax

  EPP is specified in XML Schema notation.  The formal syntax presented
  here is a complete schema representation of EPP suitable for automated
  validation of EPP XML instances.

  Two schemas are presented here.  The first schema is the base EPP
  schema.  The second schema defines elements and structures that MAY be
  used by both the base EPP schema and object mapping schemas.

4.1 Base Schema

  <?xml version="1.0" encoding="UTF-8"?>

  <schema targetNamespace="urn:iana:xml:ns:epp-1.0"
          xmlns:epp="urn:iana:xml:ns:epp-1.0"
          xmlns:eppcom="urn:iana:xml:ns:eppcom-1.0"
          xmlns="http://www.w3.org/2001/XMLSchema"
          elementFormDefault="qualified">

  <!--
  Import common element types.
  -->
    <import namespace="urn:iana:xml:ns:eppcom-1.0"
            schemaLocation="eppcom-1.0.xsd"/>

    <annotation>
      <documentation>
        Extensible Provisioning Protocol v1.0 schema.
      </documentation>
    </annotation>

  <!--
  Every EPP XML instance must begin with this element.
  -->
    <element name="epp" type="epp:eppType"/>

  <!--
  An EPP XML instance must contain a greeting, hello, command,
  or response.
  -->
    <complexType name="eppType">
      <choice>
        <element name="greeting" type="epp:greetingType"/>
        <element name="hello" type="epp:helloType"/>
        <element name="command" type="epp:commandType"/>
        <element name="response" type="epp:responseType"/>
      </choice>



Hollenbeck             Expires December 29, 2001               [Page 45]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    </complexType>

  <!--
  A greeting is sent by a server in response to a client connection
  or <hello>.
  -->
    <complexType name="greetingType">
      <sequence>
        <element name="svID" type="epp:sIDType"/>
        <element name="svDate" type="dateTime"/>
        <element name="svcMenu" type="epp:svcMenuType"/>
      </sequence>
    </complexType>

  <!--
  A <hello> is sent to request a <greeting>.
  -->
    <complexType name="helloType"/>

  <!--
  Server IDs are strings with minimum and maximum length restrictions.
  -->
    <simpleType name="sIDType">
      <restriction base="normalizedString">
        <minLength value="3"/>
        <maxLength value="64"/>
      </restriction>
    </simpleType>

  <!--
  A server greeting identifies available object services.
  -->
    <complexType name="svcMenuType">
      <sequence>
        <element name="version" type="epp:versionType"
         maxOccurs="unbounded"/>
        <element name="lang" type="language"
         maxOccurs="unbounded"/>
        <any namespace="##other"
         maxOccurs="unbounded"/>
        <element name="unspec" type="epp:unboundedExtType"
         minOccurs="0"/>
      </sequence>
    </complexType>

  <!--
  Extension framework types.
  -->



Hollenbeck             Expires December 29, 2001               [Page 46]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    <complexType name="optExtType">
      <sequence>
        <any namespace="##other"
         minOccurs="0"/>
      </sequence>
    </complexType>

    <complexType name="unboundedExtType">
      <sequence>
        <any namespace="##other"
         maxOccurs="unbounded"/>
      </sequence>
    </complexType>

  <!--
  An EPP version number is a dotted pair of decimal numbers.
  -->
    <simpleType name="versionType">
      <restriction base="token">
        <pattern value="[1-9].[0-9]"/>
        <enumeration value="1.0"/>
      </restriction>
    </simpleType>

  <!--
  Command types.
  -->
    <complexType name="commandType">
      <sequence>
        <element name="creds" type="epp:credsType"
         minOccurs="0"/>
        <choice>
          <element name="check" type="epp:readWriteType"/>
          <element name="create" type="epp:readWriteType"/>
          <element name="delete" type="epp:readWriteType"/>
          <element name="info" type="epp:readWriteType"/>
          <element name="login" type="epp:loginType"/>
          <element name="logout"/>
          <element name="poll" type="epp:pollType"/>
          <element name="renew" type="epp:readWriteType"/>
          <element name="transfer" type="epp:transferType"/>
          <element name="update" type="epp:readWriteType"/>
        </choice>
        <element name="unspec" type="epp:optExtType"
         minOccurs="0"/>
        <element name="clTRID" type="epp:trIDStringType"
         minOccurs="0"/>
      </sequence>



Hollenbeck             Expires December 29, 2001               [Page 47]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    </complexType>

  <!--
  Credentials and options may be specified as part of a <login>
  command to create a session, or they may be specified with other
  commands to operate in session-less mode.  The two modes can not
  be mixed.
  -->
    <complexType name="credsType">
      <sequence>
        <element name="clID" type="eppcom:clIDType"/>
        <element name="pw" type="epp:pwType"/>
        <element name="newPW" type="epp:pwType"
         minOccurs="0"/>
        <element name="options" type="epp:credsOptionsType"/>
      </sequence>
    </complexType>

    <complexType name="credsOptionsType">
      <sequence>
        <element name="version" type="epp:versionType"/>
        <element name="lang" type="language"/>
      </sequence>
    </complexType>

    <simpleType name="pwType">
      <restriction base="token">
        <minLength value="6"/>
        <maxLength value="16"/>
      </restriction>
    </simpleType>

  <!--
  The <login> command.
  -->
    <complexType name="loginType">
      <sequence>
        <element name="svcs" type="epp:loginSvcType"/>
      </sequence>
    </complexType>

    <complexType name="loginSvcType">
      <sequence>
        <any namespace="##other"
         maxOccurs="unbounded"/>
        <element name="unspec" type="epp:unboundedExtType"
         minOccurs="0"/>
      </sequence>



Hollenbeck             Expires December 29, 2001               [Page 48]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    </complexType>

  <!--
  The <poll> command.
  -->
    <complexType name="pollType">
      <attribute name="op" type="epp:pollOpType"
       use="required"/>
      <attribute name="msgID" type="token"
       use="optional"/>
    </complexType>

    <simpleType name="pollOpType">
      <restriction base="token">
        <enumeration value="ack"/>
        <enumeration value="req"/>
      </restriction>
    </simpleType>

  <!--
  The <transfer> command.  This is object-specific, and uses attributes
  to identify the requested operation.
  -->
    <complexType name="transferType">
      <sequence>
        <any namespace="##other"/>
      </sequence>
      <attribute name="op" type="epp:transferOpType"
       use="required"/>
    </complexType>

    <simpleType name="transferOpType">
      <restriction base="token">
        <enumeration value="approve"/>
        <enumeration value="cancel"/>
        <enumeration value="query"/>
        <enumeration value="reject"/>
        <enumeration value="request"/>
      </restriction>
    </simpleType>

  <!--
  All other object-centric commands. EPP doesn't specify the syntax or
  semantics of object-centric command elements.  The elements MUST be
  described in detail in another schema specific to the object.
  -->
    <complexType name="readWriteType">
      <sequence>



Hollenbeck             Expires December 29, 2001               [Page 49]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


        <any namespace="##other"/>
      </sequence>
    </complexType>

    <complexType name="trIDType">
      <sequence>
        <element name="clTRID" type="epp:trIDStringType"
         minOccurs="0"/>
        <element name="svTRID" type="epp:trIDStringType"/>
      </sequence>
    </complexType>

    <simpleType name="trIDStringType">
      <restriction base="token">
        <minLength value="3"/>
        <maxLength value="64"/>
      </restriction>
    </simpleType>

  <!--
  Response types.
  -->
    <complexType name="responseType">
      <sequence>
        <element name="result" type="epp:resultType"
         maxOccurs="unbounded"/>
        <element name="msgQ" type="epp:msgQType"
         minOccurs="0"/>
        <element name="resData" type="epp:optExtType"
         minOccurs="0"/>
        <element name="unspec" type="epp:optExtType"
         minOccurs="0"/>
        <element name="trID" type="epp:trIDType"/>
      </sequence>
    </complexType>

    <complexType name="resultType">
      <sequence>
        <element name="msg" type="epp:msgType"/>
        <element name="value" type="string"
         minOccurs="0" maxOccurs="unbounded"/>
      </sequence>
      <attribute name="code" type="epp:resultCodeType"
       use="required"/>
    </complexType>

    <complexType name="msgQType">
      <sequence>



Hollenbeck             Expires December 29, 2001               [Page 50]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


        <element name="qDate" type="dateTime"
         minOccurs="0" />
      </sequence>
      <attribute name="count" type="unsignedLong"
       use="optional" default="0"/>
    </complexType>

  <!--
  Human-readable text may be expressed in languages other than English.
  -->
    <complexType name="msgType">
      <simpleContent>
        <extension base="normalizedString">
          <attribute name="lang" type="language"
           use="optional" default="en"/>
          <attribute name="id" type="token"
           use="optional"/>
        </extension>
      </simpleContent>
    </complexType>

  <!--
  EPP result codes.
  -->
    <simpleType name="resultCodeType">
      <restriction base="unsignedShort">
        <enumeration value="1000"/>
        <enumeration value="1300"/>
        <enumeration value="1301"/>
        <enumeration value="1500"/>
        <enumeration value="2000"/>
        <enumeration value="2001"/>
        <enumeration value="2002"/>
        <enumeration value="2003"/>
        <enumeration value="2004"/>
        <enumeration value="2005"/>
        <enumeration value="2100"/>
        <enumeration value="2101"/>
        <enumeration value="2102"/>
        <enumeration value="2103"/>
        <enumeration value="2104"/>
        <enumeration value="2105"/>
        <enumeration value="2106"/>
        <enumeration value="2200"/>
        <enumeration value="2201"/>
        <enumeration value="2202"/>
        <enumeration value="2300"/>
        <enumeration value="2301"/>



Hollenbeck             Expires December 29, 2001               [Page 51]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


        <enumeration value="2302"/>
        <enumeration value="2303"/>
        <enumeration value="2304"/>
        <enumeration value="2305"/>
        <enumeration value="2306"/>
        <enumeration value="2307"/>
        <enumeration value="2308"/>
        <enumeration value="2400"/>
        <enumeration value="2500"/>
        <enumeration value="2501"/>
        <enumeration value="2502"/>
      </restriction>
    </simpleType>

  <!--
  End of schema.
  -->
  </schema>

































Hollenbeck             Expires December 29, 2001               [Page 52]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


4.2 Shared Structure Schema

  <?xml version="1.0" encoding="UTF-8"?>

  <schema targetNamespace="urn:iana:xml:ns:eppcom-1.0"
          xmlns:eppcom="urn:iana:xml:ns:eppcom-1.0"
          xmlns="http://www.w3.org/2001/XMLSchema"
          elementFormDefault="qualified">

    <annotation>
      <documentation>
        Extensible Provisioning Protocol v1.0
        shared structures schema.
      </documentation>
    </annotation>

  <!--
  Object authorization information types.
  -->
    <complexType name="authInfoType">
      <simpleContent>
        <extension base="normalizedString">
          <attribute name="type" type="eppcom:authType"/>
          <attribute name="roid" type="eppcom:roidType"
           use="optional"/>
        </extension>
      </simpleContent>
    </complexType>

    <simpleType name="authType">
      <restriction base="token">
        <enumeration value="pw"/>
      </restriction>
    </simpleType>

  <!--
  <check> result type.
  -->
    <simpleType name="checkType">
      <restriction base="token">
        <enumeration value="+"/>
        <enumeration value="-"/>
      </restriction>
    </simpleType>

  <!--
  Abstract client and object identifier type.
  -->



Hollenbeck             Expires December 29, 2001               [Page 53]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


    <simpleType name="clIDType">
      <restriction base="token">
        <minLength value="3"/>
        <maxLength value="16"/>
      </restriction>
    </simpleType>

  <!--
  DNS label type.
  -->
    <simpleType name="labelType">
      <restriction base="token">
        <minLength value="1"/>
        <maxLength value="255"/>
      </restriction>
    </simpleType>

  <!--
  Repository Object IDentifier type.
  -->
    <simpleType name="roidType">
      <restriction base="token">
        <pattern value="
  144168    </restriction>
    </simpleType>

  <!--
  Transfer status identifiers.
  -->
    <simpleType name="trStatusType">
      <restriction base="token">
        <enumeration value="clientApproved"/>
        <enumeration value="clientCancelled"/>
        <enumeration value="clientRejected"/>
        <enumeration value="pending"/>
        <enumeration value="serverApproved"/>
        <enumeration value="serverCancelled"/>
      </restriction>
    </simpleType>

  <!--
  End of schema.
  -->
  </schema>







Hollenbeck             Expires December 29, 2001               [Page 54]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


5. Internationalization Considerations

  EPP is represented in XML, which provides native support for encoding
  information using the Unicode character set and its more compact
  representations including UTF-8.  Compliant XML processors are
  REQUIRED to understand both UTF-8 and UTF-16.  Though XML includes
  provisions to identify other character set encodings through use of an
  "encoding" attribute in an <?xml?> declaration, EPP use with character
  sets other than UTF-8 is NOT RECOMMENDED.

  EPP includes a provision for returning a human-readable message with
  every result code.  This document describes result codes in English,
  but the actual text returned with a result MAY be provided in a
  language negotiated when a session is established.  Languages other
  than English MUST be noted through specification of a "lang" attribute
  for each message.  Valid values for the "lang" attribute and "lang"
  negotiation elements are described in [RFC3066] and [ISO639].

  All date-time values presented via EPP MUST be expressed in Universal
  Coordinated Time using the Gregorian calendar.  XML Schema allows use
  of time zone identifiers to indicate offsets from the zero meridian,
  but this option MUST NOT be used with EPP.  Both extended and
  truncated date and time forms defined in [ISO8601] MAY be used, though
  a server SHOULD use one form or the other consistently.



























Hollenbeck             Expires December 29, 2001               [Page 55]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


6. IANA Considerations

  XML schemas require a URI for unique identification.  Schemas MUST be
  registered to ensure URI uniqueness, but the IETF does not currently
  have a recommended repository for the registration of XML schemas.
  This document uses URNs to describe XML namespaces and XML schemas
  conforming to a registry mechanism described in [IANA-XML].

  IANA SHOULD maintain a registry of XML namespace and schema URI
  assignments.  URI assignment requests SHOULD be reviewed by a
  designated expert, and values SHOULD be assigned only as a result of
  standards action taken by the IESG.

  This document requests assignment of the following URIs:

  urn:iana:xml:ns:epp-1.0: The XML namespace URI for EPP.

  urn:iana:xml:schema:epp-1.0: The XML Schema URI for EPP.

  urn:iana:xml:ns:eppcom-1.0: The XML namespace URI for EPP shared
  structures.

  urn:iana:xml:schema:eppcom-1.0: The XML Schema URI for EPP shared
  structures.



























Hollenbeck             Expires December 29, 2001               [Page 56]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


7. Security Considerations

  EPP provides only simple client authentication services.  A passive
  attack is sufficient to recover client identifiers and passwords,
  allowing trivial command forgery.  Protection against most common
  attacks and more robust security services MUST be provided by other
  protocol layers.

  EPP uses a variant of the PLAIN SASL mechanism described in [RFC2595]
  to provide a simple application-layer authentication service.  Where
  the PLAIN SASL mechanism specifies provision of an authorization
  identifier, authentication identifier, and password as a single string
  separated by ASCII NUL characters, EPP specifies use of a combined
  authorization and authentication identifier and a password provided as
  distinct XML elements.

  Repeated password guessing attempts can be discouraged by limiting the
  number of <login> attempts that can be attempted on an open
  connection.  A server MAY close an open connection if multiple <login>
  attempts are made with either an invalid client identifier, an invalid
  password, or both an invalid client identifier and an invalid
  password.

  EPP uses authentication information associated with objects to confirm
  object transfer authority.  Authentication information exchanged
  between EPP clients and third party entities MUST be exchanged using a
  facility that provides privacy and integrity services to protect
  against unintended disclosure and modification while in transit.























Hollenbeck             Expires December 29, 2001               [Page 57]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


8. Acknowledgements

  This document was originally written as an individual submission
  Internet-Draft.  The provreg working group later adopted it as a
  working group document and provided many invaluable comments and
  suggested improvements.













































Hollenbeck             Expires December 29, 2001               [Page 58]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


9. References

  [GRRP] S. Hollenbeck: "Generic Registry-Registrar Protocol
  Requirements", work in progress.

  [IANA-XML] M. Mealling: "The IANA XML Registry", work in progress.

  [ISO639] ISO 639:1988 (E/F): "Code for the representation of names of
  languages - The International Organization for Standardization".

  [ISO8601] ISO 8601:1988 (E): "Data elements and interchange formats -
  Information interchange - Representation of dates and times - The
  International Organization for Standardization".

  [RFC821] J. Postel: "Simple Mail Transfer Protocol", RFC 821, August
  1982.

  [RFC2119] S. Bradner: "Key Words for Use in RFCs to Indicate
  Requirement Levels", BCP 14, RFC 2119, March 1997.

  [RFC2279] F. Yergeau: "UTF-8, a transformation format of ISO 10646",
  RFC 2279, January 1998.

  [RFC2595] C. Newman: "Using TLS with IMAP, POP3 and ACAP", RFC 2595,
  June 1999.

  [RFC3023] M. Murata et al.: "XML Media Types", RFC 3023, January 2001.

  [RFC3066] H. Alvestrand: "Tags for the Identification of Languages",
  BCP 47, RFC 3066, January 2001.

  [XML] Editors T. Bray et al.: "Extensible Markup Language (XML) 1.0
  (Second Edition)", W3C Recommendation 6 October 2000.

  [XMLS-1] Editors H. Thompson et al.: "XML Schema Part 1: Structures",
  W3C Recommendation 2 May 2001.

  [XMLS-2] Editors P. Biron, A. Malhotra: "XML Schema Part 2:
  Datatypes", W3C Recommendation 2 May 2001.












Hollenbeck             Expires December 29, 2001               [Page 59]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


10. Author's Address

  Scott Hollenbeck
  VeriSign Global Registry Services
  21345 Ridgetop Circle
  Dulles, VA 20166-6503
  USA
  shollenbeck@verisign.com











































Hollenbeck             Expires December 29, 2001               [Page 60]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


A. Revisions From Previous Version

  -03 to -04:

  Modified the Introduction slightly to note the MIME media type
  definition and the scope for transport and security protocol bindings.

  Added an Acknowledgements section.

  Modified namespace and schema URNs to incorporate version numbers.

  Added <qDate> child element to the <msgQ> element.  Rewrote portions
  of the <poll> command and <response> descriptions to note this change
  and to provide a more explicit description of <transfer> information
  and notices defined by local server policies.

  Moved ROID return in responses to object <info> response mappings.

  Updated the description of error code 2202 to refer to authorization
  information instead of authorization identifiers.































Hollenbeck             Expires December 29, 2001               [Page 61]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


B. Full Copyright Statement

  Copyright (C) The Internet Society 2001.  All Rights Reserved.

  This document and translations of it may be copied and furnished to
  others, and derivative works that comment on or otherwise explain it
  or assist in its implementation may be prepared, copied, published and
  distributed, in whole or in part, without restriction of any kind,
  provided that the above copyright notice and this paragraph are
  included on all such copies and derivative works.  However, this
  document itself may not be modified in any way, such as by removing
  the copyright notice or references to the Internet Society or other
  Internet organizations, except as needed for the purpose of developing
  Internet standards in which case the procedures for copyrights defined
  in the Internet Standards process must be followed, or as required to
  translate it into languages other than English.

  The limited permissions granted above are perpetual and will not be
  revoked by the Internet Society or its successors or assigns.

  This document and the information contained herein is provided on an
  "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
  TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
  NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN
  WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
  MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

  Funding for the RFC Editor function is currently provided by the
  Internet Society.




















Hollenbeck             Expires December 29, 2001               [Page 62]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


C: Object Mapping Template

  This appendix describes a recommended outline for documenting the EPP
  mapping of an object.  Documents that describe EPP object mappings
  SHOULD describe the mapping in a format similar to the one used here.
  Additional sections are required if the object mapping is written in
  Internet-Draft or RFC format.

1. Introduction

  Provide an introduction that describes the object and an overview of
  the mapping to EPP.

2. Object Attributes

  Describe the attributes associated with the object, including
  references to syntax specifications as appropriate.  Examples of
  object attributes include a name or identifier and dates associated
  with modification events.

3. EPP Command Mapping

3.1 EPP Query Commands

3.1.1 EPP <check> Command

  Describe the object-specific mappings required to implement the EPP
  <check> command.  Include both sample commands and sample responses.

3.1.2 EPP <info> Command

  Describe the object-specific mappings required to implement the EPP
  <info> command.  Include both sample commands and sample responses.

3.1.3 EPP <poll> Command

  Describe the object-specific mappings required to implement the EPP
  <poll> command.  Include both sample commands and sample responses.

3.1.4 EPP <transfer> Command

  Describe the object-specific mappings required to implement the EPP
  <transfer> query command.  Include both sample commands and sample
  responses.

3.2 EPP Transform Commands

3.2.1 EPP <create> Command



Hollenbeck             Expires December 29, 2001               [Page 63]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


  Describe the object-specific mappings required to implement the EPP
  <create> command.  Include both sample commands and sample responses.
  Describe the status of the object with respect to time, including
  expected client and server behavior if a validity period is used.

3.2.2 EPP <delete> Command

  Describe the object-specific mappings required to implement the EPP
  <delete> command.  Include both sample commands and sample responses.

3.2.3 EPP <renew> Command

  Describe the object-specific mappings required to implement the EPP
  <renew> command.  Include both sample commands and sample responses.

3.2.4 EPP <transfer> Command

  Describe the object-specific mappings required to implement the EPP
  <transfer> command.  Include both sample commands and sample
  responses.

3.2.5 EPP <update> Command

  Describe the object-specific mappings required to implement the EPP
  <update> command.  Include both sample commands and sample responses.

4. Formal Syntax

  Provide the XML schema for the object mapping.  An XML DTD MUST NOT be
  used as DTDs do not provide sufficient support for XML namespaces and
  strong data typing.




















Hollenbeck             Expires December 29, 2001               [Page 64]


Internet-Draft      Extensible Provisioning Protocol       June 29, 2001


D: Media Type Registration: application/epp+xml

  MIME media type name: application

  MIME subtype name: epp+xml

  Mandatory parameters: none

  Optional parameters: Same as the charset parameter of application/xml
  as specified in [RFC3023].

  Encoding considerations: Same as the encoding considerations of
  application/xml as specified in [RFC3023].

  Security considerations: This type has all of the security
  considerations described in [RFC3023] plus the considerations
  specified in the Security Considerations section of this document.

  Interoperability considerations: XML has proven to be interoperable
  across WebDAV clients and servers, and for import and export from
  multiple XML authoring tools.  For maximum interoperability,
  validating processors are recommended.  Although non-validating
  processors may be more efficient, they are not required to handle all
  features of XML.  For further information, see sub-section 2.9
  "Standalone Document Declaration" and section 5 "Conformance" of
  [XML].

  Published specification: This document.

  Applications which use this media type: EPP is device-, platform-, and
  vendor-neutral and is supported by multiple service providers.

  Additional information: If used, magic numbers, fragment identifiers,
  base URIs, and use of the BOM should be as specified in [RFC3023].

    Magic number(s): None.
    File extension(s): .xml
    Macintosh File Type Code(s): "TEXT"

  Person and email address for further information: See the "Author's
  Address" section of this document.

  Intended usage: COMMON

  Author/Change controller: IETF






Hollenbeck             Expires December 29, 2001               [Page 65]

Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/