[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-gould-allocation-token) 00 01 02 03 04 05 06 07 08

Network Working Group                                           J. Gould
Internet-Draft                                            VeriSign, Inc.
Intended status: Standards Track                                K. Feher
Expires: November 17, 2018                                       Neustar
                                                            May 16, 2018


  Allocation Token Extension for the Extensible Provisioning Protocol
                                 (EPP)
                 draft-ietf-regext-allocation-token-08

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   extension for including an Allocation Token in query and transform
   commands.  The Allocation Token is used as a credential that
   authorizes a client to request the allocation of a specific object
   from the server, using one of the EPP transform commands including
   create and transfer.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 17, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must



Gould & Feher           Expires November 17, 2018               [Page 1]


Internet-Draft               allocationToken                    May 2018


   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Conventions Used in This Document . . . . . . . . . . . .   3
   2.  Object Attributes . . . . . . . . . . . . . . . . . . . . . .   4
     2.1.  Allocation Token  . . . . . . . . . . . . . . . . . . . .   4
   3.  EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  EPP Query Commands  . . . . . . . . . . . . . . . . . . .   4
       3.1.1.  EPP <check> Command . . . . . . . . . . . . . . . . .   4
       3.1.2.  EPP <info> Command  . . . . . . . . . . . . . . . . .   8
       3.1.3.  EPP <transfer> Query Command  . . . . . . . . . . . .  10
     3.2.  EPP Transform Commands  . . . . . . . . . . . . . . . . .  11
       3.2.1.  EPP <create> Command  . . . . . . . . . . . . . . . .  11
       3.2.2.  EPP <delete> Command  . . . . . . . . . . . . . . . .  12
       3.2.3.  EPP <renew> Command . . . . . . . . . . . . . . . . .  12
       3.2.4.  EPP <transfer> Command  . . . . . . . . . . . . . . .  12
       3.2.5.  EPP <update> Command  . . . . . . . . . . . . . . . .  13
   4.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .  14
     4.1.  Allocation Token Extension Schema . . . . . . . . . . . .  14
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  15
     5.1.  XML Namespace . . . . . . . . . . . . . . . . . . . . . .  15
     5.2.  EPP Extension Registry  . . . . . . . . . . . . . . . . .  15
   6.  Implementation Status . . . . . . . . . . . . . . . . . . . .  15
     6.1.  Verisign EPP SDK  . . . . . . . . . . . . . . . . . . . .  16
     6.2.  Neustar EPP SDK . . . . . . . . . . . . . . . . . . . . .  16
     6.3.  Neustar gTLD SRS  . . . . . . . . . . . . . . . . . . . .  17
     6.4.  Net::DRI  . . . . . . . . . . . . . . . . . . . . . . . .  17
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  18
   8.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  18
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  18
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  18
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  19
   Appendix A.  Change History . . . . . . . . . . . . . . . . . . .  19
     A.1.  Change from 00 to 01  . . . . . . . . . . . . . . . . . .  19
     A.2.  Change from 01 to 02  . . . . . . . . . . . . . . . . . .  19
     A.3.  Change from 02 to 03  . . . . . . . . . . . . . . . . . .  19
     A.4.  Change from 03 to 04  . . . . . . . . . . . . . . . . . .  19
     A.5.  Change from 04 to REGEXT 00 . . . . . . . . . . . . . . .  20
     A.6.  Change from REGEXT 00 to REGEXT 01  . . . . . . . . . . .  20
     A.7.  Change from REGEXT 01 to REGEXT 02  . . . . . . . . . . .  20
     A.8.  Change from REGEXT 02 to REGEXT 03  . . . . . . . . . . .  20
     A.9.  Change from REGEXT 03 to REGEXT 04  . . . . . . . . . . .  20
     A.10. Change from REGEXT 04 to REGEXT 05  . . . . . . . . . . .  20
     A.11. Change from REGEXT 05 to REGEXT 06  . . . . . . . . . . .  20



Gould & Feher           Expires November 17, 2018               [Page 2]


Internet-Draft               allocationToken                    May 2018


     A.12. Change from REGEXT 06 to REGEXT 07  . . . . . . . . . . .  22
     A.13. Change from REGEXT 07 to REGEXT 08  . . . . . . . . . . .  22
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  22

1.  Introduction

   This document describes an extension mapping for version 1.0 of the
   Extensible Provisioning Protocol (EPP) [RFC5730].  This mapping, an
   extension to EPP object mappings like the EPP domain name mapping
   [RFC5731], supports passing an Allocation Token as a credential that
   authorizes a client to request the allocation of a specific object
   from the server, using one of the EPP transform commands including
   create and transfer.

   Allocation is when a server assigns the sponsoring client of an
   object based on the use of an Allocation Token credential.  Examples
   include allocating a registration based on a pre-eligibility
   Allocation Token, allocating a premium domain name registration based
   on an auction Allocation Token, allocating a registration based on a
   founders Allocation Token, and allocating an existing domain name
   held by the server or by a different sponsoring client based on an
   Allocation Token passed with a transfer command.

   A client MUST pass an Allocation Token known to the server to be
   authorized to use one of the supported EPP transform commands.  It is
   up to server policy which EPP transform commands and which objects
   require the Allocation Token.  The Allocation Token MAY be returned
   to an authorized client for passing out-of-band to a client that uses
   it with an EPP transform command.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented in order to develop a conforming
   implementation.

   In examples, "C:" represents lines sent by a protocol client and "S:"
   represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a REQUIRED feature of this protocol.

   "allocationToken-1.0" is used as an abbreviation for
   "urn:ietf:params:xml:ns:allocationToken-1.0".  The XML namespace



Gould & Feher           Expires November 17, 2018               [Page 3]


Internet-Draft               allocationToken                    May 2018


   prefix "allocationToken" is used, but implementations MUST NOT depend
   on it and instead employ a proper namespace-aware XML parser and
   serializer to interpret and output the XML documents.

2.  Object Attributes

   This extension adds additional elements to EPP object mappings like
   the EPP domain name mapping [RFC5731].  Only those new elements are
   described here.

2.1.  Allocation Token

   The Allocation Token is a simple XML "token" type.  The exact format
   of the Allocation Token is up to server policy.  The server MUST have
   the Allocation Token for each object to match against the Allocation
   Token passed by the client to authorize the allocation of the object.
   The <allocationToken:allocationToken> element is used for all of the
   supported EPP commands as well as the info response.  If the
   Allocation Token passed to the server does not apply to the object,
   the server MUST return an EPP error result code of 2201.

   An example <allocationToken:allocationToken> element with value of
   "abc123":

   <allocationToken:allocationToken xmlns:allocationToken=
             "urn:ietf:params:xml:ns:allocationToken-1.0">
     abc123
   </allocationToken:allocationToken>

3.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].

3.1.  EPP Query Commands

   EPP provides three commands to retrieve object information: <check>
   to determine if an object can be provisioned, <info> to retrieve
   information associated with an object, and <transfer> to retrieve
   object transfer status information.

3.1.1.  EPP <check> Command

   This extension defines additional elements to extend the EPP <check>
   command of an object mapping like [RFC5731].

   This extension allow clients to check the availability of an object
   with an Allocation Token, as described in Section 2.1.  Clients can



Gould & Feher           Expires November 17, 2018               [Page 4]


Internet-Draft               allocationToken                    May 2018


   check if an object can be created using the Allocation Token.  The
   Allocation Token is applied to all object names included in the EPP
   <check> command.

   Example <check> command for the example.tld domain name using the
   <allocationToken:allocationToken> extension with the allocation token
   of 'abc123':

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <check>
   C:      <domain:check
   C:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.tld</domain:name>
   C:      </domain:check>
   C:    </check>
   C:    <extension>
   C:      <allocationToken:allocationToken
   C:        xmlns:allocationToken=
   C:          "urn:ietf:params:xml:ns:allocationToken-1.0">
   C:        abc123
   C:      </allocationToken:allocationToken>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   If the query was successful, the server replies with a <check>
   response providing the availability status of the queried object
   based on the following Allocation Token cases, where the object is
   otherwise available:

   1.  If an object requires an Allocation Token and the Allocation
       Token does apply to the object, then the server MUST return the
       availability status as available (e.g., "avail" attribute is "1"
       or "true").
   2.  If an object requires an Allocation Token and the Allocation
       Token does not apply to the object or an object does not require
       an Allocation Token, then the server SHOULD return the
       availability status as unavailable (e.g., "avail" attribute is
       "0" or "false").









Gould & Feher           Expires November 17, 2018               [Page 5]


Internet-Draft               allocationToken                    May 2018


   Example <check> domain response for a <check> command using the
   <allocationToken:allocationToken> extension:


   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S: <response>
   S:  <result code="1000">
   S:   <msg lang="en-US">Command completed successfully</msg>
   S:  </result>
   S:  <resData>
   S:   <domain:chkData
   S:     xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:    <domain:cd>
   S:     <domain:name avail="0">example.tld</domain:name>
   S:     <domain:reason>Allocation Token mismatch</domain:reason>
   S:    </domain:cd>
   S:   </domain:chkData>
   S:  </resData>
   S:  <trID>
   S:   <clTRID>ABC-DEF-12345</clTRID>
   S:   <svTRID>54321-XYZ</svTRID>
   S:  </trID>
   S: </response>
   S:</epp>


























Gould & Feher           Expires November 17, 2018               [Page 6]


Internet-Draft               allocationToken                    May 2018


   Example <check> command with the <allocationToken:allocationToken>
   extension for the example.tld and example2.tld domain names.
   Availability of example.tld and example2.tld domain names are based
   on the Allocation Token 'abc123':


   C:<?xml version="1.0" encoding="UTF-8"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C: <command>
   C:  <check>
   C:   <domain:check
   C:     xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:    <domain:name>example.tld</domain:name>
   C:    <domain:name>example2.tld</domain:name>
   C:   </domain:check>
   C:  </check>
   C:  <extension>
   C:   <allocationToken:allocationToken
   C:     xmlns:allocationToken=
   C:       "urn:ietf:params:xml:ns:allocationToken-1.0">
   C:     abc123
   C:   </allocationToken:allocationToken>
   C:  </extension>
   C:  <clTRID>ABC-DEF-12345</clTRID>
   C: </command>
   C:</epp>

























Gould & Feher           Expires November 17, 2018               [Page 7]


Internet-Draft               allocationToken                    May 2018


   Example <check> domain response for multiple domain names in the
   <check> command using the <allocationToken:allocationToken>
   extension:


   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S: <response>
   S:  <result code="1000">
   S:   <msg lang="en-US">Command completed successfully</msg>
   S:  </result>
   S:  <resData>
   S:   <domain:chkData
   S:     xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:    <domain:cd>
   S:     <domain:name avail="0">example.tld</domain:name>
   S:     <domain:reason>Allocation Token mismatch</domain:reason>
   S:    </domain:cd>
   S:    <domain:cd>
   S:     <domain:name avail="1">example2.tld</domain:name>
   S:    </domain:cd>
   S:   </domain:chkData>
   S:  </resData>
   S:  <trID>
   S:   <clTRID>ABC-DEF-12345</clTRID>
   S:   <svTRID>54321-XYZ</svTRID>
   S:  </trID>
   S: </response>
   S:</epp>

   This extension does not add any elements to the EPP <check> response
   described in the [RFC5730].

3.1.2.  EPP <info> Command

   This extension defines additional elements to extend the EPP <info>
   command of an object mapping like [RFC5731].

   The EPP <info> command allows a client to request information
   associated with an existing object.  Authorized clients MAY retrieve
   the Allocation Token (Section 2.1) along with the other object
   information using the <allocationToken:info> element.  The
   <allocationToken:info> element is an empty element that serves as a
   marker to the server to return the <allocationToken:allocationToken>
   element in the info response.  If the client is not authorized to
   receive the Allocation Token, the server MUST return an EPP error
   result code of 2201.  If the client is authorized to receive the
   Allocation Token, but there is no Allocation Token associated with



Gould & Feher           Expires November 17, 2018               [Page 8]


Internet-Draft               allocationToken                    May 2018


   the object, the server MUST return an EPP error result code of 2303
   object referencing the <allocationToken:info> element.  The
   auhorization is subject to server policy.

   Example <info> command with the allocationToken:info extension for
   the example.tld domain name:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:   <info>
   C:    <domain:info
   C:      xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"
   C:      xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0
   C:      domain-1.0.xsd">
   C:      <domain:name>example.tld</domain:name>
   C:    </domain:info>
   C:   </info>
   C:   <extension>
   C:      <allocationToken:info
   C:        xmlns:allocationToken=
   C:          "urn:ietf:params:xml:ns:allocationToken-1.0/>
   C:   </extension>
   C:   <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   If the query was successful, the server replies with an
   <allocationToken:allocationToken> element, as described in
   Section 2.1.





















Gould & Feher           Expires November 17, 2018               [Page 9]


Internet-Draft               allocationToken                    May 2018


   Example <info> domain response using the
   <allocationToken:allocationToken> extension:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <domain:infData
   S:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>example.tld</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="pendingCreate"/>
   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2012-04-03T22:00:00.0Z</domain:crDate>
   S:        <domain:authInfo>
   S:          <domain:pw>2fooBAR</domain:pw>
   S:        </domain:authInfo>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <allocationToken:allocationToken
   S:        xmlns:allocationToken=
   S:          "urn:ietf:params:xml:ns:allocationToken-1.0">
   S:        abc123
   S:      </allocationToken:allocationToken>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

3.1.3.  EPP <transfer> Query Command

   This extension does not add any elements to the EPP <transfer> query
   command or <transfer> query response described in the [RFC5730].







Gould & Feher           Expires November 17, 2018              [Page 10]


Internet-Draft               allocationToken                    May 2018


3.2.  EPP Transform Commands

   EPP provides five commands to transform objects: <create> to create
   an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage object sponsorship changes, and <update> to
   change information associated with an object.

3.2.1.  EPP <create> Command

   This extension defines additional elements to extend the EPP <create>
   command of an object mapping like [RFC5731].

   The EPP <create> command provides a transform operation that allows a
   client to create an instance of an object.  In addition to the EPP
   command elements described in an object mapping like [RFC5731], the
   command MUST contain a child <allocationToken:allocationToken>
   element for the client to be authorized to create and allocate the
   object.  If the Allocation Token does not apply to the object, the
   server MUST return an EPP error result code of 2201.































Gould & Feher           Expires November 17, 2018              [Page 11]


Internet-Draft               allocationToken                    May 2018


   Example <create> command to create a domain object with an Allocation
   Token:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <create>
   C:      <domain:create
   C:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example.tld</domain:name>
   C:        <domain:registrant>jd1234</domain:registrant>
   C:        <domain:contact type="admin">sh8013</domain:contact>
   C:        <domain:contact type="tech">sh8013</domain:contact>
   C:        <domain:authInfo>
   C:          <domain:pw>2fooBAR</domain:pw>
   C:        </domain:authInfo>
   C:      </domain:create>
   C:    </create>
   C:    <extension>
   C:      <allocationToken:allocationToken
   C:        xmlns:allocationToken=
   C:          "urn:ietf:params:xml:ns:allocationToken-1.0">
   C:        abc123
   C:      </allocationToken:allocationToken>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   This extension does not add any elements to the EPP <create> response
   described in the [RFC5730].

3.2.2.  EPP <delete> Command

   This extension does not add any elements to the EPP <delete> command
   or <delete> response described in the [RFC5730].

3.2.3.  EPP <renew> Command

   This extension does not add any elements to the EPP <renew> command
   or <renew> response described in the [RFC5730].

3.2.4.  EPP <transfer> Command

   This extension defines additional elements to extend the EPP
   <transfer> request command of an object mapping like [RFC5731].





Gould & Feher           Expires November 17, 2018              [Page 12]


Internet-Draft               allocationToken                    May 2018


   The EPP <transfer> request command provides a transform operation
   that allows a client to request the transfer of an object.  In
   addition to the EPP command elements described in an object mapping
   like [RFC5731], the command MUST contain a child
   <allocationToken:allocationToken> element for the client to be
   authorized to transfer and allocate the object.  The authorization
   associated with the Allocation Token is in addition to and does not
   replace the authorization mechanism defined for the object's
   <transfer> request command.  If the Allocation Token does not apply
   to the object, the server MUST return an EPP error result code of
   2201.

   Example <transfer> request command to allocate the domain object with
   the Allocation Token:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <transfer op="request">
   C:      <domain:transfer
   C:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   C:        <domain:name>example1.tld</domain:name>
   C:        <domain:period unit="y">1</domain:period>
   C:        <domain:authInfo>
   C:          <domain:pw>2fooBAR</domain:pw>
   C:        </domain:authInfo>
   C:      </domain:transfer>
   C:    </transfer>
   C:    <extension>
   C:      <allocationToken:allocationToken
   C:        xmlns:allocationToken=
   C:          "urn:ietf:params:xml:ns:allocationToken-1.0">
   C:        abc123
   C:      </allocationToken:allocationToken>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   This extension does not add any elements to the EPP <transfer>
   response described in the [RFC5730].

3.2.5.  EPP <update> Command

   This extension does not add any elements to the EPP <update> command
   or <update> response described in the [RFC5730].





Gould & Feher           Expires November 17, 2018              [Page 13]


Internet-Draft               allocationToken                    May 2018


4.  Formal Syntax

   One schema is presented here that is the EPP Allocation Token
   Extension schema.

   The formal syntax presented here is a complete schema representation
   of the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

4.1.  Allocation Token Extension Schema

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>
   <schema
     targetNamespace="urn:ietf:params:xml:ns:allocationToken-1.0"
     xmlns:allocationToken="urn:ietf:params:xml:ns:allocationToken-1.0"
     xmlns="http://www.w3.org/2001/XMLSchema"
     elementFormDefault="qualified"
   >

     <annotation>
       <documentation>
         Extensible Provisioning Protocol v1.0
         Allocation
         Token Extension.
       </documentation>
     </annotation>

     <!-- Element used in info command to get allocation token. -->
     <element name="info"/>

     <!-- Allocation Token used in transform
       commands and info response -->
     <element
       name="allocationToken"
       type="allocationToken:allocationTokenType"/>

     <simpleType name="allocationTokenType">
       <restriction base="token">
         <minLength value="1"/>
       </restriction>
     </simpleType>

   <!-- End of schema. -->
   </schema>
   END



Gould & Feher           Expires November 17, 2018              [Page 14]


Internet-Draft               allocationToken                    May 2018


5.  IANA Considerations

5.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].  The
   following URI assignment is requested of IANA:

   Registration request for the allocationToken namespace:

      URI: ietf:params:xml:ns:allocationToken-1.0
      Registrant Contact: IESG
      XML: None.  Namespace URIs do not represent an XML specification.

   Registration request for the allocationToken XML schema:

      URI: ietf:params:xml:ns:allocationToken-1.0
      Registrant Contact: IESG
      XML: See the "Formal Syntax" section of this document.

5.2.  EPP Extension Registry

   The following registration of the EPP Extension Registry, described
   in [RFC7451], is requested:

   Name of Extension: "Allocation Token Extension for the Extensible
   Provisioning Protocol (EPP)"

   Document status: Standards Track

   Reference: (insert reference to RFC version of this document)

   Registrant Name and Email Address: IESG, <iesg@ietf.org>

   TLDs: Any

   IPR Disclosure: None

   Status: Active

   Notes: None

6.  Implementation Status

   Note to RFC Editor: Please remove this section and the reference to
   RFC 7942 [RFC7942] before publication.





Gould & Feher           Expires November 17, 2018              [Page 15]


Internet-Draft               allocationToken                    May 2018


   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in RFC 7942
   [RFC7942].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.

   According to RFC 7942 [RFC7942], "this will allow reviewers and
   working groups to assign due consideration to documents that have the
   benefit of running code, which may serve as evidence of valuable
   experimentation and feedback that have made the implemented protocols
   more mature.  It is up to the individual working groups to use this
   information as they see fit".

6.1.  Verisign EPP SDK

   Organization: Verisign Inc.

   Name: Verisign EPP SDK

   Description: The Verisign EPP SDK includes both a full client
   implementation and a full server stub implementation of draft-ietf-
   regext-allocation-token.

   Level of maturity: Production

   Coverage: All aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: jgould@verisign.com

   URL: https://www.verisign.com/en_US/channel-resources/domain-
   registry-products/epp-sdks

6.2.  Neustar EPP SDK

   Organisation: Neustar Inc.

   Name: Neustar EPP SDK





Gould & Feher           Expires November 17, 2018              [Page 16]


Internet-Draft               allocationToken                    May 2018


   Description: The Neustar EPP SDK includes a full client
   implementation of draft-ietf-regext-allocation-token.

   Level of maturity: Production

   Coverage: All aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: quoc-anh.np@team.neustar

   URL: http://registrytoolkit.neustar

6.3.  Neustar gTLD SRS

   Organisation: Neustar Inc.

   Name: Neustar generic Top Level Domain (gTLD) Shared Registry System
   (SRS).

   Description: The Neustar gTLD SRS implements the server side of
   draft-ietf-regext-allocation-token for several Top Level Domains.

   Level of maturity: Production

   Coverage: All server side aspects of the protocol are implemented.

   Licensing: Proprietary

   Contact: quoc-anh.np@team.neustar

6.4.  Net::DRI

   Organization: Dot and Co

   Name: Net::DRI

   Description: Net::DRI implements the client-side of draft-ietf-
   regext-allocation-token.

   Level of maturity: Production

   Coverage: All client-side aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: netdri@dotandco.com




Gould & Feher           Expires November 17, 2018              [Page 17]


Internet-Draft               allocationToken                    May 2018


7.  Security Considerations

   The mapping described in this document does not provide any security
   services beyond those described by EPP [RFC5730] and protocol layers
   used by EPP.  The security considerations described in these other
   specifications apply to this specification as well.

   The mapping acts as a conduit for the passing of Allocation Tokens
   between a client and a server.  The definition of the Allocation
   Token is defined outside of this mapping.  The following are security
   considerations in the definition and use of an Allocation Token:

   1.  An Allocation Token should be considered secret information by
       the client and should be protected at rest and in transit.
   2.  An Allocation Token should be single use, meaning it should be
       unique per object and per allocation operation.
   3.  An Allocation Token should have a limited life with some form of
       expiry in the Allocation Token if generated by a trusted 3rd
       third party, or with a server-side expiry if generated by the
       server.
   4.  An Allocation Token should use a strong random value if it is
       based on an unsigned code.
   5.  An Allocation Token should leverage digital signatures to confirm
       its authenticity if generated by a trusted 3rd party.
   6.  An Allocation Token should is signed XML should be encoded (e.g.,
       base64) to mitigate server validation issues.

8.  Acknowledgements

   The authors wish to acknowledge the original concept for this draft
   and the efforts in the initial versions of this draft by Trung Tran
   and Sharon Wodjenski.

   Special suggestions that have been incorporated into this document
   were provided by Scott Hollenbeck, Rubens Kuhl, Alexander Mayrhofer,
   and Patrick Mevzek.

9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997, <https://www.rfc-
              editor.org/info/rfc2119>.






Gould & Feher           Expires November 17, 2018              [Page 18]


Internet-Draft               allocationToken                    May 2018


   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004, <https://www.rfc-
              editor.org/info/rfc3688>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC5731]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Domain Name Mapping", STD 69, RFC 5731,
              DOI 10.17487/RFC5731, August 2009, <https://www.rfc-
              editor.org/info/rfc5731>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

9.2.  Informative References

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

Appendix A.  Change History

A.1.  Change from 00 to 01

   1.  Amended XML Namespace section of IANA Considerations, added EPP
       Extension Registry section.
   2.  Moved Change History to the back section as an Appendix.

A.2.  Change from 01 to 02

   1.  Ping update.

A.3.  Change from 02 to 03

   1.  Ping update.

A.4.  Change from 03 to 04

   1.  Updated the authors for the draft.








Gould & Feher           Expires November 17, 2018              [Page 19]


Internet-Draft               allocationToken                    May 2018


A.5.  Change from 04 to REGEXT 00

   1.  Changed to regext working group draft by changing draft-gould-
       allocation-token to draft-ietf-regext-allocation-token.

A.6.  Change from REGEXT 00 to REGEXT 01

   1.  Ping update.

A.7.  Change from REGEXT 01 to REGEXT 02

   1.  Added the Implementation Status section.

A.8.  Change from REGEXT 02 to REGEXT 03

   1.  Changed Neustar author to Kal Feher.

A.9.  Change from REGEXT 03 to REGEXT 04

   1.  Added Neustar implementation to the Implementation Status
       section.

A.10.  Change from REGEXT 04 to REGEXT 05

   1.  Updates based on feedback from Patrick Mevzek, that include:

       1.  Remove "or code" from the Abstract section.
       2.  Add a missing "to" in "an allocation token TO one of the
           EPP..." in the Introduction section.
       3.  Reword the "The allocation token is known to the server..."
           sentence in the Introduction section.
       4.  Modify the "The allocation token MAY be returned to an
           authorized client for passing out-of-band to a client that
           uses it with an EPP transform command" to clarify who the two
           separate clients are.
       5.  Removed an unneeded ":" from the EPP <transfer> Command and
           EPP <update> Command sections.

A.11.  Change from REGEXT 05 to REGEXT 06

   1.  Fix description of Neustar gTLD SRS based on feedback from Rubens
       Kuhl.
   2.  Updates based on feedback from Alexander Mayrhofer, that include:

       1.   Making all references to Allocation Token to use the upper
            case form.
       2.   Revise the language of the abstract to include "for
            including an Allocation Token in query and transform



Gould & Feher           Expires November 17, 2018              [Page 20]


Internet-Draft               allocationToken                    May 2018


            commands.  The Allocation Token is used as a credential that
            authorizes a client to request the allocation of a specific
            object from the server, using one of the EPP transform
            commands..."
       3.   Replace the title "EPP <transfer> Command" with "EPP
            <transfer> Query Command" for section 3.1.3.
       4.   Revise the second sentence of the Introduction to "The
            mapping, ..., supports passing an Allocation Token..."
       5.   Change "support" to "require" in the Introduction sentence
            "It is up to server policy which EPP transform commands and
            which objects support the Allocation Token."
       6.   Add the definition of Allocation to the Introduction.
       7.   Removed "transform" from "all of the supported EPP transform
            commands" in the "Allocation Token" section, since the
            Allocation Token can be used with the "check" command as
            well.
       8.   Remove the word "same" from "The same
            <allocationToken:allocationToken> element is used for
            all..." in the "Allocation Token" section.
       9.   Change the description of the use of the 2201 error in the
            "Allocation Token" section, the "EPP <create> Command"
            section, the "EPP <transfer> Command" section, and the "EPP
            <update> Command" section.
       10.  Revise "<check> to determine if an object is known to the
            server..." to "<check> to determine if an object can be
            provisioned..." and remove "detailed" in the description of
            the <info> in the "EPP Query Commands" section.
       11.  Add missing description of the expected <check> response
            behavior.
       12.  Replaced the example reason "Invalid domain-token pair" with
            "Allocation Token mismatch".
       13.  Replace "information on" with "information associated with"
            in the "EPP <info> Command" section.
       14.  Removed the "that identifies the extension namespace", the
            ", defined in...", the Allocation Token links from the error
            response sentences, and the "object referencing the
            <allocationToken:info> element" in the "EPP <info> Command"
            section.
       15.  Added "The authorization is subject to server policy." to
            the "EPP <info> Command" section.
       16.  Replace "or <transfer> response>" with "or <transfer> query
            response>" in the EPP <transfer> Query Command" section.
       17.  Replace "create an object" with "create an instance of an
            object" in the "EPP <create> Command" section.
       18.  Revised the sentence to include "the command MUST contain a
            child <allocationToken:allocationToken> element for the
            client to be authorized to create and allocate the object"
            in the "EPP <create> Command" section.



Gould & Feher           Expires November 17, 2018              [Page 21]


Internet-Draft               allocationToken                    May 2018


       19.  Removed the reference to section 2.1 and the namespace
            identification text in the "EPP <transfer> Command" section.
       20.  Added "The authorization associated with the Allocation
            Token is in addition to and does not replace the
            authorization mechanism defined for the object's <transfer>
            request command." to the "EPP <transfer> Command" section.
       21.  Modified the first sentence of the "EPP Extension Registry"
            section to read "The following registration of the EPP
            Extension Registry, described in RFC7451, is requested"
       22.  Removed support with using the Allocation Token with an
            empty extension of update (e.g., release command), based on
            the confusion and lack of known applicability.
   3.  Updates based on feedback from Scott Hollenbeck, that include:

       1.  Revised XML schema to included a minimum length of 1 for the
           allocationTokenType.
       2.  Revised the "IANA Considerations" section to include the
           registration of the XML schema.
       3.  Revised the "Security Considerations" section to include
           considerations for the definition of the Allocation Tokens.

A.12.  Change from REGEXT 06 to REGEXT 07

   1.  Updates based on feedback from Patrick Mevzek:

       1.  Updated obsoleted RFC 7942 to RFC 7942.
       2.  Moved RFC 7451 to an informational reference.

A.13.  Change from REGEXT 07 to REGEXT 08

   1.  Changed Kal Feher's contact e-mail address.
   2.  Changed Neustar's Implementation Status contact e-mail address.
   3.  Added the Net::DRI sub-section to the Implementation Status
       section.

Authors' Addresses

   James Gould
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email: jgould@verisign.com
   URI:   http://www.verisigninc.com






Gould & Feher           Expires November 17, 2018              [Page 22]


Internet-Draft               allocationToken                    May 2018


   Kal Feher
   Neustar
   lvl 8/10 Queens Road
   Melbourne, VIC  3004
   AU

   Email: ietf@feherfamily.org
   URI:   http://www.neustar.biz











































Gould & Feher           Expires November 17, 2018              [Page 23]


Html markup produced by rfcmarkup 1.126, available from https://tools.ietf.org/tools/rfcmarkup/